Commit | Line | Data |
---|---|---|
9952f691 | 1 | // SPDX-License-Identifier: GPL-2.0-only |
8996b89d ML |
2 | /* |
3 | * Calxeda Highbank AHCI SATA platform driver | |
4 | * Copyright 2012 Calxeda, Inc. | |
5 | * | |
6 | * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov | |
8996b89d ML |
7 | */ |
8 | #include <linux/kernel.h> | |
9 | #include <linux/gfp.h> | |
10 | #include <linux/module.h> | |
8996b89d ML |
11 | #include <linux/types.h> |
12 | #include <linux/err.h> | |
13 | #include <linux/io.h> | |
14 | #include <linux/spinlock.h> | |
15 | #include <linux/device.h> | |
61e6ae71 | 16 | #include <linux/of.h> |
8996b89d ML |
17 | #include <linux/of_address.h> |
18 | #include <linux/platform_device.h> | |
19 | #include <linux/libata.h> | |
8996b89d ML |
20 | #include <linux/interrupt.h> |
21 | #include <linux/delay.h> | |
22 | #include <linux/export.h> | |
83a7faac | 23 | #include <linux/gpio/consumer.h> |
d50b110f | 24 | |
8996b89d ML |
25 | #include "ahci.h" |
26 | ||
27 | #define CPHY_MAP(dev, addr) ((((dev) & 0x1f) << 7) | (((addr) >> 9) & 0x7f)) | |
28 | #define CPHY_ADDR(addr) (((addr) & 0x1ff) << 2) | |
29 | #define SERDES_CR_CTL 0x80a0 | |
30 | #define SERDES_CR_ADDR 0x80a1 | |
31 | #define SERDES_CR_DATA 0x80a2 | |
32 | #define CR_BUSY 0x0001 | |
33 | #define CR_START 0x0001 | |
34 | #define CR_WR_RDN 0x0002 | |
b2e4c7b9 | 35 | #define CPHY_TX_INPUT_STS 0x2001 |
8996b89d | 36 | #define CPHY_RX_INPUT_STS 0x2002 |
b2e4c7b9 ML |
37 | #define CPHY_SATA_TX_OVERRIDE 0x8000 |
38 | #define CPHY_SATA_RX_OVERRIDE 0x4000 | |
39 | #define CPHY_TX_OVERRIDE 0x2004 | |
40 | #define CPHY_RX_OVERRIDE 0x2005 | |
8996b89d ML |
41 | #define SPHY_LANE 0x100 |
42 | #define SPHY_HALF_RATE 0x0001 | |
43 | #define CPHY_SATA_DPLL_MODE 0x0700 | |
44 | #define CPHY_SATA_DPLL_SHIFT 8 | |
45 | #define CPHY_SATA_DPLL_RESET (1 << 11) | |
b2e4c7b9 ML |
46 | #define CPHY_SATA_TX_ATTEN 0x1c00 |
47 | #define CPHY_SATA_TX_ATTEN_SHIFT 10 | |
8996b89d ML |
48 | #define CPHY_PHY_COUNT 6 |
49 | #define CPHY_LANE_COUNT 4 | |
50 | #define CPHY_PORT_COUNT (CPHY_PHY_COUNT * CPHY_LANE_COUNT) | |
51 | ||
52 | static DEFINE_SPINLOCK(cphy_lock); | |
53 | /* Each of the 6 phys can have up to 4 sata ports attached to i. Map 0-based | |
54 | * sata ports to their phys and then to their lanes within the phys | |
55 | */ | |
56 | struct phy_lane_info { | |
57 | void __iomem *phy_base; | |
58 | u8 lane_mapping; | |
59 | u8 phy_devs; | |
b2e4c7b9 | 60 | u8 tx_atten; |
8996b89d ML |
61 | }; |
62 | static struct phy_lane_info port_data[CPHY_PORT_COUNT]; | |
63 | ||
d50b110f ML |
64 | static DEFINE_SPINLOCK(sgpio_lock); |
65 | #define SCLOCK 0 | |
66 | #define SLOAD 1 | |
67 | #define SDATA 2 | |
68 | #define SGPIO_PINS 3 | |
69 | #define SGPIO_PORTS 8 | |
70 | ||
d50b110f ML |
71 | struct ecx_plat_data { |
72 | u32 n_ports; | |
2b79c56f ML |
73 | /* number of extra clocks that the SGPIO PIC controller expects */ |
74 | u32 pre_clocks; | |
75 | u32 post_clocks; | |
83a7faac | 76 | struct gpio_desc *sgpio_gpiod[SGPIO_PINS]; |
d50b110f ML |
77 | u32 sgpio_pattern; |
78 | u32 port_to_sgpio[SGPIO_PORTS]; | |
79 | }; | |
80 | ||
81 | #define SGPIO_SIGNALS 3 | |
82 | #define ECX_ACTIVITY_BITS 0x300000 | |
8c427f06 | 83 | #define ECX_ACTIVITY_SHIFT 0 |
d50b110f ML |
84 | #define ECX_LOCATE_BITS 0x80000 |
85 | #define ECX_LOCATE_SHIFT 1 | |
86 | #define ECX_FAULT_BITS 0x400000 | |
8c427f06 | 87 | #define ECX_FAULT_SHIFT 2 |
d50b110f ML |
88 | static inline int sgpio_bit_shift(struct ecx_plat_data *pdata, u32 port, |
89 | u32 shift) | |
90 | { | |
91 | return 1 << (3 * pdata->port_to_sgpio[port] + shift); | |
92 | } | |
93 | ||
94 | static void ecx_parse_sgpio(struct ecx_plat_data *pdata, u32 port, u32 state) | |
95 | { | |
96 | if (state & ECX_ACTIVITY_BITS) | |
97 | pdata->sgpio_pattern |= sgpio_bit_shift(pdata, port, | |
98 | ECX_ACTIVITY_SHIFT); | |
99 | else | |
100 | pdata->sgpio_pattern &= ~sgpio_bit_shift(pdata, port, | |
101 | ECX_ACTIVITY_SHIFT); | |
102 | if (state & ECX_LOCATE_BITS) | |
103 | pdata->sgpio_pattern |= sgpio_bit_shift(pdata, port, | |
104 | ECX_LOCATE_SHIFT); | |
105 | else | |
106 | pdata->sgpio_pattern &= ~sgpio_bit_shift(pdata, port, | |
107 | ECX_LOCATE_SHIFT); | |
108 | if (state & ECX_FAULT_BITS) | |
109 | pdata->sgpio_pattern |= sgpio_bit_shift(pdata, port, | |
110 | ECX_FAULT_SHIFT); | |
111 | else | |
112 | pdata->sgpio_pattern &= ~sgpio_bit_shift(pdata, port, | |
113 | ECX_FAULT_SHIFT); | |
114 | } | |
115 | ||
116 | /* | |
117 | * Tell the LED controller that the signal has changed by raising the clock | |
118 | * line for 50 uS and then lowering it for 50 uS. | |
119 | */ | |
120 | static void ecx_led_cycle_clock(struct ecx_plat_data *pdata) | |
121 | { | |
83a7faac | 122 | gpiod_set_value(pdata->sgpio_gpiod[SCLOCK], 1); |
d50b110f | 123 | udelay(50); |
83a7faac | 124 | gpiod_set_value(pdata->sgpio_gpiod[SCLOCK], 0); |
d50b110f ML |
125 | udelay(50); |
126 | } | |
127 | ||
128 | static ssize_t ecx_transmit_led_message(struct ata_port *ap, u32 state, | |
129 | ssize_t size) | |
130 | { | |
131 | struct ahci_host_priv *hpriv = ap->host->private_data; | |
a498e316 | 132 | struct ecx_plat_data *pdata = hpriv->plat_data; |
d50b110f ML |
133 | struct ahci_port_priv *pp = ap->private_data; |
134 | unsigned long flags; | |
135 | int pmp, i; | |
136 | struct ahci_em_priv *emp; | |
137 | u32 sgpio_out; | |
138 | ||
139 | /* get the slot number from the message */ | |
140 | pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8; | |
141 | if (pmp < EM_MAX_SLOTS) | |
142 | emp = &pp->em_priv[pmp]; | |
143 | else | |
144 | return -EINVAL; | |
145 | ||
146 | if (!(hpriv->em_msg_type & EM_MSG_TYPE_LED)) | |
147 | return size; | |
148 | ||
149 | spin_lock_irqsave(&sgpio_lock, flags); | |
150 | ecx_parse_sgpio(pdata, ap->port_no, state); | |
151 | sgpio_out = pdata->sgpio_pattern; | |
2b79c56f ML |
152 | for (i = 0; i < pdata->pre_clocks; i++) |
153 | ecx_led_cycle_clock(pdata); | |
154 | ||
83a7faac | 155 | gpiod_set_value(pdata->sgpio_gpiod[SLOAD], 1); |
d50b110f | 156 | ecx_led_cycle_clock(pdata); |
83a7faac | 157 | gpiod_set_value(pdata->sgpio_gpiod[SLOAD], 0); |
d50b110f ML |
158 | /* |
159 | * bit-bang out the SGPIO pattern, by consuming a bit and then | |
160 | * clocking it out. | |
161 | */ | |
162 | for (i = 0; i < (SGPIO_SIGNALS * pdata->n_ports); i++) { | |
83a7faac | 163 | gpiod_set_value(pdata->sgpio_gpiod[SDATA], sgpio_out & 1); |
d50b110f ML |
164 | sgpio_out >>= 1; |
165 | ecx_led_cycle_clock(pdata); | |
166 | } | |
2b79c56f ML |
167 | for (i = 0; i < pdata->post_clocks; i++) |
168 | ecx_led_cycle_clock(pdata); | |
d50b110f ML |
169 | |
170 | /* save off new led state for port/slot */ | |
171 | emp->led_state = state; | |
172 | ||
173 | spin_unlock_irqrestore(&sgpio_lock, flags); | |
174 | return size; | |
175 | } | |
176 | ||
177 | static void highbank_set_em_messages(struct device *dev, | |
178 | struct ahci_host_priv *hpriv, | |
179 | struct ata_port_info *pi) | |
180 | { | |
181 | struct device_node *np = dev->of_node; | |
182 | struct ecx_plat_data *pdata = hpriv->plat_data; | |
183 | int i; | |
d50b110f ML |
184 | |
185 | for (i = 0; i < SGPIO_PINS; i++) { | |
83a7faac LW |
186 | struct gpio_desc *gpiod; |
187 | ||
188 | gpiod = devm_gpiod_get_index(dev, "calxeda,sgpio", i, | |
189 | GPIOD_OUT_HIGH); | |
190 | if (IS_ERR(gpiod)) { | |
191 | dev_err(dev, "failed to get GPIO %d\n", i); | |
192 | continue; | |
d50b110f | 193 | } |
83a7faac LW |
194 | gpiod_set_consumer_name(gpiod, "CX SGPIO"); |
195 | ||
196 | pdata->sgpio_gpiod[i] = gpiod; | |
d50b110f ML |
197 | } |
198 | of_property_read_u32_array(np, "calxeda,led-order", | |
199 | pdata->port_to_sgpio, | |
200 | pdata->n_ports); | |
2b79c56f ML |
201 | if (of_property_read_u32(np, "calxeda,pre-clocks", &pdata->pre_clocks)) |
202 | pdata->pre_clocks = 0; | |
203 | if (of_property_read_u32(np, "calxeda,post-clocks", | |
204 | &pdata->post_clocks)) | |
205 | pdata->post_clocks = 0; | |
d50b110f ML |
206 | |
207 | /* store em_loc */ | |
208 | hpriv->em_loc = 0; | |
209 | hpriv->em_buf_sz = 4; | |
210 | hpriv->em_msg_type = EM_MSG_TYPE_LED; | |
211 | pi->flags |= ATA_FLAG_EM | ATA_FLAG_SW_ACTIVITY; | |
212 | } | |
213 | ||
8996b89d ML |
214 | static u32 __combo_phy_reg_read(u8 sata_port, u32 addr) |
215 | { | |
216 | u32 data; | |
217 | u8 dev = port_data[sata_port].phy_devs; | |
218 | spin_lock(&cphy_lock); | |
219 | writel(CPHY_MAP(dev, addr), port_data[sata_port].phy_base + 0x800); | |
220 | data = readl(port_data[sata_port].phy_base + CPHY_ADDR(addr)); | |
221 | spin_unlock(&cphy_lock); | |
222 | return data; | |
223 | } | |
224 | ||
225 | static void __combo_phy_reg_write(u8 sata_port, u32 addr, u32 data) | |
226 | { | |
227 | u8 dev = port_data[sata_port].phy_devs; | |
228 | spin_lock(&cphy_lock); | |
229 | writel(CPHY_MAP(dev, addr), port_data[sata_port].phy_base + 0x800); | |
230 | writel(data, port_data[sata_port].phy_base + CPHY_ADDR(addr)); | |
231 | spin_unlock(&cphy_lock); | |
232 | } | |
233 | ||
234 | static void combo_phy_wait_for_ready(u8 sata_port) | |
235 | { | |
236 | while (__combo_phy_reg_read(sata_port, SERDES_CR_CTL) & CR_BUSY) | |
237 | udelay(5); | |
238 | } | |
239 | ||
240 | static u32 combo_phy_read(u8 sata_port, u32 addr) | |
241 | { | |
242 | combo_phy_wait_for_ready(sata_port); | |
243 | __combo_phy_reg_write(sata_port, SERDES_CR_ADDR, addr); | |
244 | __combo_phy_reg_write(sata_port, SERDES_CR_CTL, CR_START); | |
245 | combo_phy_wait_for_ready(sata_port); | |
246 | return __combo_phy_reg_read(sata_port, SERDES_CR_DATA); | |
247 | } | |
248 | ||
249 | static void combo_phy_write(u8 sata_port, u32 addr, u32 data) | |
250 | { | |
251 | combo_phy_wait_for_ready(sata_port); | |
252 | __combo_phy_reg_write(sata_port, SERDES_CR_ADDR, addr); | |
253 | __combo_phy_reg_write(sata_port, SERDES_CR_DATA, data); | |
254 | __combo_phy_reg_write(sata_port, SERDES_CR_CTL, CR_WR_RDN | CR_START); | |
255 | } | |
256 | ||
257 | static void highbank_cphy_disable_overrides(u8 sata_port) | |
258 | { | |
259 | u8 lane = port_data[sata_port].lane_mapping; | |
260 | u32 tmp; | |
261 | if (unlikely(port_data[sata_port].phy_base == NULL)) | |
262 | return; | |
263 | tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + lane * SPHY_LANE); | |
b2e4c7b9 ML |
264 | tmp &= ~CPHY_SATA_RX_OVERRIDE; |
265 | combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp); | |
266 | } | |
267 | ||
268 | static void cphy_override_tx_attenuation(u8 sata_port, u32 val) | |
269 | { | |
270 | u8 lane = port_data[sata_port].lane_mapping; | |
271 | u32 tmp; | |
272 | ||
273 | if (val & 0x8) | |
274 | return; | |
275 | ||
276 | tmp = combo_phy_read(sata_port, CPHY_TX_INPUT_STS + lane * SPHY_LANE); | |
277 | tmp &= ~CPHY_SATA_TX_OVERRIDE; | |
278 | combo_phy_write(sata_port, CPHY_TX_OVERRIDE + lane * SPHY_LANE, tmp); | |
279 | ||
280 | tmp |= CPHY_SATA_TX_OVERRIDE; | |
281 | combo_phy_write(sata_port, CPHY_TX_OVERRIDE + lane * SPHY_LANE, tmp); | |
282 | ||
283 | tmp |= (val << CPHY_SATA_TX_ATTEN_SHIFT) & CPHY_SATA_TX_ATTEN; | |
284 | combo_phy_write(sata_port, CPHY_TX_OVERRIDE + lane * SPHY_LANE, tmp); | |
8996b89d ML |
285 | } |
286 | ||
287 | static void cphy_override_rx_mode(u8 sata_port, u32 val) | |
288 | { | |
289 | u8 lane = port_data[sata_port].lane_mapping; | |
290 | u32 tmp; | |
291 | tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + lane * SPHY_LANE); | |
b2e4c7b9 ML |
292 | tmp &= ~CPHY_SATA_RX_OVERRIDE; |
293 | combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp); | |
8996b89d | 294 | |
b2e4c7b9 ML |
295 | tmp |= CPHY_SATA_RX_OVERRIDE; |
296 | combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp); | |
8996b89d ML |
297 | |
298 | tmp &= ~CPHY_SATA_DPLL_MODE; | |
299 | tmp |= val << CPHY_SATA_DPLL_SHIFT; | |
b2e4c7b9 | 300 | combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp); |
8996b89d ML |
301 | |
302 | tmp |= CPHY_SATA_DPLL_RESET; | |
b2e4c7b9 | 303 | combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp); |
8996b89d ML |
304 | |
305 | tmp &= ~CPHY_SATA_DPLL_RESET; | |
b2e4c7b9 | 306 | combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp); |
8996b89d ML |
307 | |
308 | msleep(15); | |
309 | } | |
310 | ||
311 | static void highbank_cphy_override_lane(u8 sata_port) | |
312 | { | |
313 | u8 lane = port_data[sata_port].lane_mapping; | |
314 | u32 tmp, k = 0; | |
315 | ||
316 | if (unlikely(port_data[sata_port].phy_base == NULL)) | |
317 | return; | |
318 | do { | |
319 | tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + | |
320 | lane * SPHY_LANE); | |
321 | } while ((tmp & SPHY_HALF_RATE) && (k++ < 1000)); | |
322 | cphy_override_rx_mode(sata_port, 3); | |
b2e4c7b9 | 323 | cphy_override_tx_attenuation(sata_port, port_data[sata_port].tx_atten); |
8996b89d ML |
324 | } |
325 | ||
326 | static int highbank_initialize_phys(struct device *dev, void __iomem *addr) | |
327 | { | |
328 | struct device_node *sata_node = dev->of_node; | |
b2e4c7b9 | 329 | int phy_count = 0, phy, port = 0, i; |
225f1eae DC |
330 | void __iomem *cphy_base[CPHY_PHY_COUNT] = {}; |
331 | struct device_node *phy_nodes[CPHY_PHY_COUNT] = {}; | |
332 | u32 tx_atten[CPHY_PORT_COUNT] = {}; | |
b2e4c7b9 | 333 | |
8996b89d | 334 | memset(port_data, 0, sizeof(struct phy_lane_info) * CPHY_PORT_COUNT); |
8996b89d ML |
335 | |
336 | do { | |
337 | u32 tmp; | |
338 | struct of_phandle_args phy_data; | |
339 | if (of_parse_phandle_with_args(sata_node, | |
340 | "calxeda,port-phys", "#phy-cells", | |
341 | port, &phy_data)) | |
342 | break; | |
343 | for (phy = 0; phy < phy_count; phy++) { | |
344 | if (phy_nodes[phy] == phy_data.np) | |
345 | break; | |
346 | } | |
347 | if (phy_nodes[phy] == NULL) { | |
348 | phy_nodes[phy] = phy_data.np; | |
349 | cphy_base[phy] = of_iomap(phy_nodes[phy], 0); | |
350 | if (cphy_base[phy] == NULL) { | |
351 | return 0; | |
352 | } | |
353 | phy_count += 1; | |
354 | } | |
355 | port_data[port].lane_mapping = phy_data.args[0]; | |
356 | of_property_read_u32(phy_nodes[phy], "phydev", &tmp); | |
357 | port_data[port].phy_devs = tmp; | |
358 | port_data[port].phy_base = cphy_base[phy]; | |
359 | of_node_put(phy_data.np); | |
360 | port += 1; | |
361 | } while (port < CPHY_PORT_COUNT); | |
b2e4c7b9 ML |
362 | of_property_read_u32_array(sata_node, "calxeda,tx-atten", |
363 | tx_atten, port); | |
364 | for (i = 0; i < port; i++) | |
365 | port_data[i].tx_atten = (u8) tx_atten[i]; | |
8996b89d ML |
366 | return 0; |
367 | } | |
368 | ||
ddfef5de ML |
369 | /* |
370 | * The Calxeda SATA phy intermittently fails to bring up a link with Gen3 | |
371 | * Retrying the phy hard reset can work around the issue, but the drive | |
372 | * may fail again. In less than 150 out of 15000 test runs, it took more | |
373 | * than 10 tries for the link to be established (but never more than 35). | |
374 | * Triple the maximum observed retry count to provide plenty of margin for | |
375 | * rare events and to guarantee that the link is established. | |
376 | * | |
377 | * Also, the default 2 second time-out on a failed drive is too long in | |
378 | * this situation. The uboot implementation of the same driver function | |
379 | * uses a much shorter time-out period and never experiences a time out | |
380 | * issue. Reducing the time-out to 500ms improves the responsiveness. | |
381 | * The other timing constants were kept the same as the stock AHCI driver. | |
382 | * This change was also tested 15000 times on 24 drives and none of them | |
383 | * experienced a time out. | |
384 | */ | |
8996b89d ML |
385 | static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class, |
386 | unsigned long deadline) | |
387 | { | |
d14d41cc | 388 | static const unsigned int timing[] = { 5, 100, 500}; |
8996b89d ML |
389 | struct ata_port *ap = link->ap; |
390 | struct ahci_port_priv *pp = ap->private_data; | |
039ece38 | 391 | struct ahci_host_priv *hpriv = ap->host->private_data; |
8996b89d ML |
392 | u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; |
393 | struct ata_taskfile tf; | |
394 | bool online; | |
395 | u32 sstatus; | |
396 | int rc; | |
ddfef5de | 397 | int retry = 100; |
8996b89d | 398 | |
fa89f53b | 399 | hpriv->stop_engine(ap); |
8996b89d ML |
400 | |
401 | /* clear D2H reception area to properly wait for D2H FIS */ | |
402 | ata_tf_init(link->device, &tf); | |
efcef265 | 403 | tf.status = ATA_BUSY; |
8996b89d ML |
404 | ata_tf_to_fis(&tf, 0, 0, d2h_fis); |
405 | ||
406 | do { | |
407 | highbank_cphy_disable_overrides(link->ap->port_no); | |
408 | rc = sata_link_hardreset(link, timing, deadline, &online, NULL); | |
409 | highbank_cphy_override_lane(link->ap->port_no); | |
410 | ||
411 | /* If the status is 1, we are connected, but the link did not | |
412 | * come up. So retry resetting the link again. | |
413 | */ | |
414 | if (sata_scr_read(link, SCR_STATUS, &sstatus)) | |
415 | break; | |
416 | if (!(sstatus & 0x3)) | |
417 | break; | |
418 | } while (!online && retry--); | |
419 | ||
039ece38 | 420 | hpriv->start_engine(ap); |
8996b89d ML |
421 | |
422 | if (online) | |
423 | *class = ahci_dev_classify(ap); | |
424 | ||
425 | return rc; | |
426 | } | |
427 | ||
428 | static struct ata_port_operations ahci_highbank_ops = { | |
429 | .inherits = &ahci_ops, | |
430 | .hardreset = ahci_highbank_hardreset, | |
d50b110f | 431 | .transmit_led_message = ecx_transmit_led_message, |
8996b89d ML |
432 | }; |
433 | ||
434 | static const struct ata_port_info ahci_highbank_port_info = { | |
435 | .flags = AHCI_FLAG_COMMON, | |
436 | .pio_mask = ATA_PIO4, | |
437 | .udma_mask = ATA_UDMA6, | |
438 | .port_ops = &ahci_highbank_ops, | |
439 | }; | |
440 | ||
25df73d9 | 441 | static const struct scsi_host_template ahci_highbank_platform_sht = { |
2cc1144a | 442 | AHCI_SHT("sata_highbank"), |
8996b89d ML |
443 | }; |
444 | ||
445 | static const struct of_device_id ahci_of_match[] = { | |
446 | { .compatible = "calxeda,hb-ahci" }, | |
5e776d7b | 447 | { /* sentinel */ } |
8996b89d ML |
448 | }; |
449 | MODULE_DEVICE_TABLE(of, ahci_of_match); | |
450 | ||
0ec24914 | 451 | static int ahci_highbank_probe(struct platform_device *pdev) |
8996b89d ML |
452 | { |
453 | struct device *dev = &pdev->dev; | |
454 | struct ahci_host_priv *hpriv; | |
d50b110f | 455 | struct ecx_plat_data *pdata; |
8996b89d ML |
456 | struct ata_host *host; |
457 | struct resource *mem; | |
458 | int irq; | |
8996b89d ML |
459 | int i; |
460 | int rc; | |
d50b110f | 461 | u32 n_ports; |
8996b89d ML |
462 | struct ata_port_info pi = ahci_highbank_port_info; |
463 | const struct ata_port_info *ppi[] = { &pi, NULL }; | |
464 | ||
465 | mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
466 | if (!mem) { | |
467 | dev_err(dev, "no mmio space\n"); | |
468 | return -EINVAL; | |
469 | } | |
470 | ||
471 | irq = platform_get_irq(pdev, 0); | |
51839e25 | 472 | if (irq < 0) |
4a24efa1 | 473 | return irq; |
4a24efa1 SS |
474 | if (!irq) |
475 | return -EINVAL; | |
8996b89d ML |
476 | |
477 | hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); | |
478 | if (!hpriv) { | |
479 | dev_err(dev, "can't alloc ahci_host_priv\n"); | |
480 | return -ENOMEM; | |
481 | } | |
d50b110f ML |
482 | pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); |
483 | if (!pdata) { | |
484 | dev_err(dev, "can't alloc ecx_plat_data\n"); | |
485 | return -ENOMEM; | |
486 | } | |
8996b89d | 487 | |
21bfd1aa | 488 | hpriv->irq = irq; |
8996b89d ML |
489 | hpriv->flags |= (unsigned long)pi.private_data; |
490 | ||
491 | hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem)); | |
492 | if (!hpriv->mmio) { | |
493 | dev_err(dev, "can't map %pR\n", mem); | |
494 | return -ENOMEM; | |
495 | } | |
496 | ||
497 | rc = highbank_initialize_phys(dev, hpriv->mmio); | |
498 | if (rc) | |
499 | return rc; | |
500 | ||
501 | ||
725c7b57 | 502 | ahci_save_initial_config(dev, hpriv); |
8996b89d ML |
503 | |
504 | /* prepare host */ | |
505 | if (hpriv->cap & HOST_CAP_NCQ) | |
506 | pi.flags |= ATA_FLAG_NCQ; | |
507 | ||
508 | if (hpriv->cap & HOST_CAP_PMP) | |
509 | pi.flags |= ATA_FLAG_PMP; | |
510 | ||
404eafe1 RH |
511 | if (hpriv->cap & HOST_CAP_64) |
512 | dma_set_coherent_mask(dev, DMA_BIT_MASK(64)); | |
513 | ||
8996b89d ML |
514 | /* CAP.NP sometimes indicate the index of the last enabled |
515 | * port, at other times, that of the last possible port, so | |
516 | * determining the maximum port number requires looking at | |
517 | * both CAP.NP and port_map. | |
518 | */ | |
519 | n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map)); | |
520 | ||
d50b110f ML |
521 | pdata->n_ports = n_ports; |
522 | hpriv->plat_data = pdata; | |
523 | highbank_set_em_messages(dev, hpriv, &pi); | |
524 | ||
8996b89d ML |
525 | host = ata_host_alloc_pinfo(dev, ppi, n_ports); |
526 | if (!host) { | |
527 | rc = -ENOMEM; | |
528 | goto err0; | |
529 | } | |
530 | ||
531 | host->private_data = hpriv; | |
532 | ||
533 | if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss) | |
534 | host->flags |= ATA_HOST_PARALLEL_SCAN; | |
535 | ||
8996b89d ML |
536 | for (i = 0; i < host->n_ports; i++) { |
537 | struct ata_port *ap = host->ports[i]; | |
538 | ||
539 | ata_port_desc(ap, "mmio %pR", mem); | |
540 | ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80); | |
541 | ||
542 | /* set enclosure management message type */ | |
543 | if (ap->flags & ATA_FLAG_EM) | |
544 | ap->em_message_type = hpriv->em_msg_type; | |
545 | ||
546 | /* disabled/not-implemented port */ | |
547 | if (!(hpriv->port_map & (1 << i))) | |
548 | ap->ops = &ata_dummy_port_ops; | |
549 | } | |
550 | ||
551 | rc = ahci_reset_controller(host); | |
552 | if (rc) | |
553 | goto err0; | |
554 | ||
555 | ahci_init_controller(host); | |
556 | ahci_print_info(host, "platform"); | |
557 | ||
21bfd1aa | 558 | rc = ahci_host_activate(host, &ahci_highbank_platform_sht); |
8996b89d ML |
559 | if (rc) |
560 | goto err0; | |
561 | ||
562 | return 0; | |
563 | err0: | |
564 | return rc; | |
565 | } | |
566 | ||
29448ec1 | 567 | #ifdef CONFIG_PM_SLEEP |
8996b89d ML |
568 | static int ahci_highbank_suspend(struct device *dev) |
569 | { | |
570 | struct ata_host *host = dev_get_drvdata(dev); | |
571 | struct ahci_host_priv *hpriv = host->private_data; | |
572 | void __iomem *mmio = hpriv->mmio; | |
573 | u32 ctl; | |
8996b89d ML |
574 | |
575 | if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) { | |
576 | dev_err(dev, "firmware update required for suspend/resume\n"); | |
577 | return -EIO; | |
578 | } | |
579 | ||
580 | /* | |
581 | * AHCI spec rev1.1 section 8.3.3: | |
582 | * Software must disable interrupts prior to requesting a | |
583 | * transition of the HBA to D3 state. | |
584 | */ | |
585 | ctl = readl(mmio + HOST_CTL); | |
586 | ctl &= ~HOST_IRQ_EN; | |
587 | writel(ctl, mmio + HOST_CTL); | |
588 | readl(mmio + HOST_CTL); /* flush */ | |
589 | ||
ec87cf37 SS |
590 | ata_host_suspend(host, PMSG_SUSPEND); |
591 | return 0; | |
8996b89d ML |
592 | } |
593 | ||
594 | static int ahci_highbank_resume(struct device *dev) | |
595 | { | |
596 | struct ata_host *host = dev_get_drvdata(dev); | |
597 | int rc; | |
598 | ||
599 | if (dev->power.power_state.event == PM_EVENT_SUSPEND) { | |
600 | rc = ahci_reset_controller(host); | |
601 | if (rc) | |
602 | return rc; | |
603 | ||
604 | ahci_init_controller(host); | |
605 | } | |
606 | ||
607 | ata_host_resume(host); | |
608 | ||
609 | return 0; | |
610 | } | |
611 | #endif | |
612 | ||
b1a72d60 | 613 | static SIMPLE_DEV_PM_OPS(ahci_highbank_pm_ops, |
8996b89d ML |
614 | ahci_highbank_suspend, ahci_highbank_resume); |
615 | ||
616 | static struct platform_driver ahci_highbank_driver = { | |
a7eb54d4 | 617 | .remove_new = ata_platform_remove_one, |
8996b89d ML |
618 | .driver = { |
619 | .name = "highbank-ahci", | |
8996b89d ML |
620 | .of_match_table = ahci_of_match, |
621 | .pm = &ahci_highbank_pm_ops, | |
622 | }, | |
623 | .probe = ahci_highbank_probe, | |
624 | }; | |
625 | ||
626 | module_platform_driver(ahci_highbank_driver); | |
627 | ||
628 | MODULE_DESCRIPTION("Calxeda Highbank AHCI SATA platform driver"); | |
629 | MODULE_AUTHOR("Mark Langsdorf <mark.langsdorf@calxeda.com>"); | |
630 | MODULE_LICENSE("GPL"); | |
631 | MODULE_ALIAS("sata:highbank"); |