Commit | Line | Data |
---|---|---|
8996b89d ML |
1 | /* |
2 | * Calxeda Highbank AHCI SATA platform driver | |
3 | * Copyright 2012 Calxeda, Inc. | |
4 | * | |
5 | * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov | |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify it | |
8 | * under the terms and conditions of the GNU General Public License, | |
9 | * version 2, as published by the Free Software Foundation. | |
10 | * | |
11 | * This program is distributed in the hope it will be useful, but WITHOUT | |
12 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
13 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
14 | * more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License along with | |
17 | * this program. If not, see <http://www.gnu.org/licenses/>. | |
18 | */ | |
19 | #include <linux/kernel.h> | |
20 | #include <linux/gfp.h> | |
21 | #include <linux/module.h> | |
22 | #include <linux/init.h> | |
23 | #include <linux/types.h> | |
24 | #include <linux/err.h> | |
25 | #include <linux/io.h> | |
26 | #include <linux/spinlock.h> | |
27 | #include <linux/device.h> | |
28 | #include <linux/of_device.h> | |
29 | #include <linux/of_address.h> | |
30 | #include <linux/platform_device.h> | |
31 | #include <linux/libata.h> | |
32 | #include <linux/ahci_platform.h> | |
33 | #include <linux/interrupt.h> | |
34 | #include <linux/delay.h> | |
35 | #include <linux/export.h> | |
36 | #include "ahci.h" | |
37 | ||
38 | #define CPHY_MAP(dev, addr) ((((dev) & 0x1f) << 7) | (((addr) >> 9) & 0x7f)) | |
39 | #define CPHY_ADDR(addr) (((addr) & 0x1ff) << 2) | |
40 | #define SERDES_CR_CTL 0x80a0 | |
41 | #define SERDES_CR_ADDR 0x80a1 | |
42 | #define SERDES_CR_DATA 0x80a2 | |
43 | #define CR_BUSY 0x0001 | |
44 | #define CR_START 0x0001 | |
45 | #define CR_WR_RDN 0x0002 | |
46 | #define CPHY_RX_INPUT_STS 0x2002 | |
47 | #define CPHY_SATA_OVERRIDE 0x4000 | |
48 | #define CPHY_OVERRIDE 0x2005 | |
49 | #define SPHY_LANE 0x100 | |
50 | #define SPHY_HALF_RATE 0x0001 | |
51 | #define CPHY_SATA_DPLL_MODE 0x0700 | |
52 | #define CPHY_SATA_DPLL_SHIFT 8 | |
53 | #define CPHY_SATA_DPLL_RESET (1 << 11) | |
54 | #define CPHY_PHY_COUNT 6 | |
55 | #define CPHY_LANE_COUNT 4 | |
56 | #define CPHY_PORT_COUNT (CPHY_PHY_COUNT * CPHY_LANE_COUNT) | |
57 | ||
58 | static DEFINE_SPINLOCK(cphy_lock); | |
59 | /* Each of the 6 phys can have up to 4 sata ports attached to i. Map 0-based | |
60 | * sata ports to their phys and then to their lanes within the phys | |
61 | */ | |
62 | struct phy_lane_info { | |
63 | void __iomem *phy_base; | |
64 | u8 lane_mapping; | |
65 | u8 phy_devs; | |
66 | }; | |
67 | static struct phy_lane_info port_data[CPHY_PORT_COUNT]; | |
68 | ||
69 | static u32 __combo_phy_reg_read(u8 sata_port, u32 addr) | |
70 | { | |
71 | u32 data; | |
72 | u8 dev = port_data[sata_port].phy_devs; | |
73 | spin_lock(&cphy_lock); | |
74 | writel(CPHY_MAP(dev, addr), port_data[sata_port].phy_base + 0x800); | |
75 | data = readl(port_data[sata_port].phy_base + CPHY_ADDR(addr)); | |
76 | spin_unlock(&cphy_lock); | |
77 | return data; | |
78 | } | |
79 | ||
80 | static void __combo_phy_reg_write(u8 sata_port, u32 addr, u32 data) | |
81 | { | |
82 | u8 dev = port_data[sata_port].phy_devs; | |
83 | spin_lock(&cphy_lock); | |
84 | writel(CPHY_MAP(dev, addr), port_data[sata_port].phy_base + 0x800); | |
85 | writel(data, port_data[sata_port].phy_base + CPHY_ADDR(addr)); | |
86 | spin_unlock(&cphy_lock); | |
87 | } | |
88 | ||
89 | static void combo_phy_wait_for_ready(u8 sata_port) | |
90 | { | |
91 | while (__combo_phy_reg_read(sata_port, SERDES_CR_CTL) & CR_BUSY) | |
92 | udelay(5); | |
93 | } | |
94 | ||
95 | static u32 combo_phy_read(u8 sata_port, u32 addr) | |
96 | { | |
97 | combo_phy_wait_for_ready(sata_port); | |
98 | __combo_phy_reg_write(sata_port, SERDES_CR_ADDR, addr); | |
99 | __combo_phy_reg_write(sata_port, SERDES_CR_CTL, CR_START); | |
100 | combo_phy_wait_for_ready(sata_port); | |
101 | return __combo_phy_reg_read(sata_port, SERDES_CR_DATA); | |
102 | } | |
103 | ||
104 | static void combo_phy_write(u8 sata_port, u32 addr, u32 data) | |
105 | { | |
106 | combo_phy_wait_for_ready(sata_port); | |
107 | __combo_phy_reg_write(sata_port, SERDES_CR_ADDR, addr); | |
108 | __combo_phy_reg_write(sata_port, SERDES_CR_DATA, data); | |
109 | __combo_phy_reg_write(sata_port, SERDES_CR_CTL, CR_WR_RDN | CR_START); | |
110 | } | |
111 | ||
112 | static void highbank_cphy_disable_overrides(u8 sata_port) | |
113 | { | |
114 | u8 lane = port_data[sata_port].lane_mapping; | |
115 | u32 tmp; | |
116 | if (unlikely(port_data[sata_port].phy_base == NULL)) | |
117 | return; | |
118 | tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + lane * SPHY_LANE); | |
119 | tmp &= ~CPHY_SATA_OVERRIDE; | |
120 | combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp); | |
121 | } | |
122 | ||
123 | static void cphy_override_rx_mode(u8 sata_port, u32 val) | |
124 | { | |
125 | u8 lane = port_data[sata_port].lane_mapping; | |
126 | u32 tmp; | |
127 | tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + lane * SPHY_LANE); | |
128 | tmp &= ~CPHY_SATA_OVERRIDE; | |
129 | combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp); | |
130 | ||
131 | tmp |= CPHY_SATA_OVERRIDE; | |
132 | combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp); | |
133 | ||
134 | tmp &= ~CPHY_SATA_DPLL_MODE; | |
135 | tmp |= val << CPHY_SATA_DPLL_SHIFT; | |
136 | combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp); | |
137 | ||
138 | tmp |= CPHY_SATA_DPLL_RESET; | |
139 | combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp); | |
140 | ||
141 | tmp &= ~CPHY_SATA_DPLL_RESET; | |
142 | combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp); | |
143 | ||
144 | msleep(15); | |
145 | } | |
146 | ||
147 | static void highbank_cphy_override_lane(u8 sata_port) | |
148 | { | |
149 | u8 lane = port_data[sata_port].lane_mapping; | |
150 | u32 tmp, k = 0; | |
151 | ||
152 | if (unlikely(port_data[sata_port].phy_base == NULL)) | |
153 | return; | |
154 | do { | |
155 | tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + | |
156 | lane * SPHY_LANE); | |
157 | } while ((tmp & SPHY_HALF_RATE) && (k++ < 1000)); | |
158 | cphy_override_rx_mode(sata_port, 3); | |
159 | } | |
160 | ||
161 | static int highbank_initialize_phys(struct device *dev, void __iomem *addr) | |
162 | { | |
163 | struct device_node *sata_node = dev->of_node; | |
164 | int phy_count = 0, phy, port = 0; | |
165 | void __iomem *cphy_base[CPHY_PHY_COUNT]; | |
166 | struct device_node *phy_nodes[CPHY_PHY_COUNT]; | |
167 | memset(port_data, 0, sizeof(struct phy_lane_info) * CPHY_PORT_COUNT); | |
168 | memset(phy_nodes, 0, sizeof(struct device_node*) * CPHY_PHY_COUNT); | |
169 | ||
170 | do { | |
171 | u32 tmp; | |
172 | struct of_phandle_args phy_data; | |
173 | if (of_parse_phandle_with_args(sata_node, | |
174 | "calxeda,port-phys", "#phy-cells", | |
175 | port, &phy_data)) | |
176 | break; | |
177 | for (phy = 0; phy < phy_count; phy++) { | |
178 | if (phy_nodes[phy] == phy_data.np) | |
179 | break; | |
180 | } | |
181 | if (phy_nodes[phy] == NULL) { | |
182 | phy_nodes[phy] = phy_data.np; | |
183 | cphy_base[phy] = of_iomap(phy_nodes[phy], 0); | |
184 | if (cphy_base[phy] == NULL) { | |
185 | return 0; | |
186 | } | |
187 | phy_count += 1; | |
188 | } | |
189 | port_data[port].lane_mapping = phy_data.args[0]; | |
190 | of_property_read_u32(phy_nodes[phy], "phydev", &tmp); | |
191 | port_data[port].phy_devs = tmp; | |
192 | port_data[port].phy_base = cphy_base[phy]; | |
193 | of_node_put(phy_data.np); | |
194 | port += 1; | |
195 | } while (port < CPHY_PORT_COUNT); | |
196 | return 0; | |
197 | } | |
198 | ||
199 | static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class, | |
200 | unsigned long deadline) | |
201 | { | |
202 | const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); | |
203 | struct ata_port *ap = link->ap; | |
204 | struct ahci_port_priv *pp = ap->private_data; | |
205 | u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; | |
206 | struct ata_taskfile tf; | |
207 | bool online; | |
208 | u32 sstatus; | |
209 | int rc; | |
210 | int retry = 10; | |
211 | ||
212 | ahci_stop_engine(ap); | |
213 | ||
214 | /* clear D2H reception area to properly wait for D2H FIS */ | |
215 | ata_tf_init(link->device, &tf); | |
121650a5 | 216 | tf.command = ATA_BUSY; |
8996b89d ML |
217 | ata_tf_to_fis(&tf, 0, 0, d2h_fis); |
218 | ||
219 | do { | |
220 | highbank_cphy_disable_overrides(link->ap->port_no); | |
221 | rc = sata_link_hardreset(link, timing, deadline, &online, NULL); | |
222 | highbank_cphy_override_lane(link->ap->port_no); | |
223 | ||
224 | /* If the status is 1, we are connected, but the link did not | |
225 | * come up. So retry resetting the link again. | |
226 | */ | |
227 | if (sata_scr_read(link, SCR_STATUS, &sstatus)) | |
228 | break; | |
229 | if (!(sstatus & 0x3)) | |
230 | break; | |
231 | } while (!online && retry--); | |
232 | ||
233 | ahci_start_engine(ap); | |
234 | ||
235 | if (online) | |
236 | *class = ahci_dev_classify(ap); | |
237 | ||
238 | return rc; | |
239 | } | |
240 | ||
241 | static struct ata_port_operations ahci_highbank_ops = { | |
242 | .inherits = &ahci_ops, | |
243 | .hardreset = ahci_highbank_hardreset, | |
244 | }; | |
245 | ||
246 | static const struct ata_port_info ahci_highbank_port_info = { | |
247 | .flags = AHCI_FLAG_COMMON, | |
248 | .pio_mask = ATA_PIO4, | |
249 | .udma_mask = ATA_UDMA6, | |
250 | .port_ops = &ahci_highbank_ops, | |
251 | }; | |
252 | ||
253 | static struct scsi_host_template ahci_highbank_platform_sht = { | |
254 | AHCI_SHT("highbank-ahci"), | |
255 | }; | |
256 | ||
257 | static const struct of_device_id ahci_of_match[] = { | |
258 | { .compatible = "calxeda,hb-ahci" }, | |
259 | {}, | |
260 | }; | |
261 | MODULE_DEVICE_TABLE(of, ahci_of_match); | |
262 | ||
c37472d3 | 263 | static int __devinit ahci_highbank_probe(struct platform_device *pdev) |
8996b89d ML |
264 | { |
265 | struct device *dev = &pdev->dev; | |
266 | struct ahci_host_priv *hpriv; | |
267 | struct ata_host *host; | |
268 | struct resource *mem; | |
269 | int irq; | |
270 | int n_ports; | |
271 | int i; | |
272 | int rc; | |
273 | struct ata_port_info pi = ahci_highbank_port_info; | |
274 | const struct ata_port_info *ppi[] = { &pi, NULL }; | |
275 | ||
276 | mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
277 | if (!mem) { | |
278 | dev_err(dev, "no mmio space\n"); | |
279 | return -EINVAL; | |
280 | } | |
281 | ||
282 | irq = platform_get_irq(pdev, 0); | |
283 | if (irq <= 0) { | |
284 | dev_err(dev, "no irq\n"); | |
285 | return -EINVAL; | |
286 | } | |
287 | ||
288 | hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); | |
289 | if (!hpriv) { | |
290 | dev_err(dev, "can't alloc ahci_host_priv\n"); | |
291 | return -ENOMEM; | |
292 | } | |
293 | ||
294 | hpriv->flags |= (unsigned long)pi.private_data; | |
295 | ||
296 | hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem)); | |
297 | if (!hpriv->mmio) { | |
298 | dev_err(dev, "can't map %pR\n", mem); | |
299 | return -ENOMEM; | |
300 | } | |
301 | ||
302 | rc = highbank_initialize_phys(dev, hpriv->mmio); | |
303 | if (rc) | |
304 | return rc; | |
305 | ||
306 | ||
307 | ahci_save_initial_config(dev, hpriv, 0, 0); | |
308 | ||
309 | /* prepare host */ | |
310 | if (hpriv->cap & HOST_CAP_NCQ) | |
311 | pi.flags |= ATA_FLAG_NCQ; | |
312 | ||
313 | if (hpriv->cap & HOST_CAP_PMP) | |
314 | pi.flags |= ATA_FLAG_PMP; | |
315 | ||
316 | ahci_set_em_messages(hpriv, &pi); | |
317 | ||
318 | /* CAP.NP sometimes indicate the index of the last enabled | |
319 | * port, at other times, that of the last possible port, so | |
320 | * determining the maximum port number requires looking at | |
321 | * both CAP.NP and port_map. | |
322 | */ | |
323 | n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map)); | |
324 | ||
325 | host = ata_host_alloc_pinfo(dev, ppi, n_ports); | |
326 | if (!host) { | |
327 | rc = -ENOMEM; | |
328 | goto err0; | |
329 | } | |
330 | ||
331 | host->private_data = hpriv; | |
332 | ||
333 | if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss) | |
334 | host->flags |= ATA_HOST_PARALLEL_SCAN; | |
335 | ||
336 | if (pi.flags & ATA_FLAG_EM) | |
337 | ahci_reset_em(host); | |
338 | ||
339 | for (i = 0; i < host->n_ports; i++) { | |
340 | struct ata_port *ap = host->ports[i]; | |
341 | ||
342 | ata_port_desc(ap, "mmio %pR", mem); | |
343 | ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80); | |
344 | ||
345 | /* set enclosure management message type */ | |
346 | if (ap->flags & ATA_FLAG_EM) | |
347 | ap->em_message_type = hpriv->em_msg_type; | |
348 | ||
349 | /* disabled/not-implemented port */ | |
350 | if (!(hpriv->port_map & (1 << i))) | |
351 | ap->ops = &ata_dummy_port_ops; | |
352 | } | |
353 | ||
354 | rc = ahci_reset_controller(host); | |
355 | if (rc) | |
356 | goto err0; | |
357 | ||
358 | ahci_init_controller(host); | |
359 | ahci_print_info(host, "platform"); | |
360 | ||
361 | rc = ata_host_activate(host, irq, ahci_interrupt, 0, | |
362 | &ahci_highbank_platform_sht); | |
363 | if (rc) | |
364 | goto err0; | |
365 | ||
366 | return 0; | |
367 | err0: | |
368 | return rc; | |
369 | } | |
370 | ||
371 | static int __devexit ahci_highbank_remove(struct platform_device *pdev) | |
372 | { | |
373 | struct device *dev = &pdev->dev; | |
374 | struct ata_host *host = dev_get_drvdata(dev); | |
375 | ||
376 | ata_host_detach(host); | |
377 | ||
378 | return 0; | |
379 | } | |
380 | ||
29448ec1 | 381 | #ifdef CONFIG_PM_SLEEP |
8996b89d ML |
382 | static int ahci_highbank_suspend(struct device *dev) |
383 | { | |
384 | struct ata_host *host = dev_get_drvdata(dev); | |
385 | struct ahci_host_priv *hpriv = host->private_data; | |
386 | void __iomem *mmio = hpriv->mmio; | |
387 | u32 ctl; | |
388 | int rc; | |
389 | ||
390 | if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) { | |
391 | dev_err(dev, "firmware update required for suspend/resume\n"); | |
392 | return -EIO; | |
393 | } | |
394 | ||
395 | /* | |
396 | * AHCI spec rev1.1 section 8.3.3: | |
397 | * Software must disable interrupts prior to requesting a | |
398 | * transition of the HBA to D3 state. | |
399 | */ | |
400 | ctl = readl(mmio + HOST_CTL); | |
401 | ctl &= ~HOST_IRQ_EN; | |
402 | writel(ctl, mmio + HOST_CTL); | |
403 | readl(mmio + HOST_CTL); /* flush */ | |
404 | ||
405 | rc = ata_host_suspend(host, PMSG_SUSPEND); | |
406 | if (rc) | |
407 | return rc; | |
408 | ||
409 | return 0; | |
410 | } | |
411 | ||
412 | static int ahci_highbank_resume(struct device *dev) | |
413 | { | |
414 | struct ata_host *host = dev_get_drvdata(dev); | |
415 | int rc; | |
416 | ||
417 | if (dev->power.power_state.event == PM_EVENT_SUSPEND) { | |
418 | rc = ahci_reset_controller(host); | |
419 | if (rc) | |
420 | return rc; | |
421 | ||
422 | ahci_init_controller(host); | |
423 | } | |
424 | ||
425 | ata_host_resume(host); | |
426 | ||
427 | return 0; | |
428 | } | |
429 | #endif | |
430 | ||
431 | SIMPLE_DEV_PM_OPS(ahci_highbank_pm_ops, | |
432 | ahci_highbank_suspend, ahci_highbank_resume); | |
433 | ||
434 | static struct platform_driver ahci_highbank_driver = { | |
435 | .remove = __devexit_p(ahci_highbank_remove), | |
436 | .driver = { | |
437 | .name = "highbank-ahci", | |
438 | .owner = THIS_MODULE, | |
439 | .of_match_table = ahci_of_match, | |
440 | .pm = &ahci_highbank_pm_ops, | |
441 | }, | |
442 | .probe = ahci_highbank_probe, | |
443 | }; | |
444 | ||
445 | module_platform_driver(ahci_highbank_driver); | |
446 | ||
447 | MODULE_DESCRIPTION("Calxeda Highbank AHCI SATA platform driver"); | |
448 | MODULE_AUTHOR("Mark Langsdorf <mark.langsdorf@calxeda.com>"); | |
449 | MODULE_LICENSE("GPL"); | |
450 | MODULE_ALIAS("sata:highbank"); |