Commit | Line | Data |
---|---|---|
421b20b9 JG |
1 | # |
2 | # SATA/PATA driver configuration | |
3 | # | |
4 | ||
b196fc69 JE |
5 | menuconfig ATA |
6 | tristate "Serial ATA (prod) and Parallel ATA (experimental) drivers" | |
e25df120 | 7 | depends on HAS_IOMEM |
bf2d401b | 8 | depends on BLOCK |
9317fd4c | 9 | depends on !(M32R || M68K) || BROKEN |
8abf1064 | 10 | depends on !SUN4 || BROKEN |
81ce3c4b | 11 | select SCSI |
c6fd2807 JG |
12 | ---help--- |
13 | If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or | |
14 | any other ATA device under Linux, say Y and make sure that you know | |
15 | the name of your ATA host adapter (the card inside your computer | |
16 | that "speaks" the ATA protocol, also called ATA controller), | |
17 | because you will be asked for it. | |
18 | ||
abcdceb9 RD |
19 | NOTE: ATA enables basic SCSI support; *however*, |
20 | 'SCSI disk support', 'SCSI tape support', or | |
21 | 'SCSI CDROM support' may also be needed, | |
22 | depending on your hardware configuration. | |
23 | ||
81ce3c4b JG |
24 | if ATA |
25 | ||
8cdf92a9 DW |
26 | config ATA_NONSTANDARD |
27 | bool | |
28 | default n | |
29 | ||
e92351bb | 30 | config ATA_ACPI |
c30484d7 | 31 | bool "ATA ACPI Support" |
e92351bb | 32 | depends on ACPI && PCI |
0ac4a3c2 | 33 | select ACPI_DOCK |
e92351bb TH |
34 | default y |
35 | help | |
36 | This option adds support for ATA-related ACPI objects. | |
37 | These ACPI objects add the ability to retrieve taskfiles | |
38 | from the ACPI BIOS and write them to the disk controller. | |
39 | These objects may be related to performance, security, | |
40 | power management, or other areas. | |
41 | You can disable this at kernel boot time by using the | |
42 | option libata.noacpi=1 | |
43 | ||
8ad92ba7 | 44 | config SATA_AHCI |
c6fd2807 | 45 | tristate "AHCI SATA support" |
81ce3c4b | 46 | depends on PCI |
c6fd2807 JG |
47 | help |
48 | This option enables support for AHCI Serial ATA. | |
49 | ||
50 | If unsure, say N. | |
51 | ||
127102ae TH |
52 | config SATA_SIL24 |
53 | tristate "Silicon Image 3124/3132 SATA support" | |
54 | depends on PCI | |
55 | help | |
56 | This option enables support for Silicon Image 3124/3132 Serial ATA. | |
57 | ||
58 | If unsure, say N. | |
59 | ||
60 | config SATA_FSL | |
61 | tristate "Freescale 3.0Gbps SATA support" | |
62 | depends on FSL_SOC | |
63 | help | |
64 | This option enables support for Freescale 3.0Gbps SATA controller. | |
65 | It can be found on MPC837x and MPC8315. | |
66 | ||
67 | If unsure, say N. | |
68 | ||
69 | config ATA_SFF | |
70 | bool "ATA SFF support" | |
71 | default y | |
72 | help | |
73 | This option adds support for ATA controllers with SFF | |
74 | compliant or similar programming interface. | |
75 | ||
76 | if ATA_SFF | |
77 | ||
8ad92ba7 | 78 | config SATA_SVW |
c6fd2807 | 79 | tristate "ServerWorks Frodo / Apple K2 SATA support" |
81ce3c4b | 80 | depends on PCI |
c6fd2807 JG |
81 | help |
82 | This option enables support for Broadcom/Serverworks/Apple K2 | |
83 | SATA support. | |
84 | ||
85 | If unsure, say N. | |
86 | ||
8ad92ba7 | 87 | config ATA_PIIX |
2c7620d5 | 88 | tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support" |
81ce3c4b | 89 | depends on PCI |
c6fd2807 | 90 | help |
2bfc3611 | 91 | This option enables support for ICH5/6/7/8 Serial ATA |
2c7620d5 A |
92 | and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series |
93 | host controllers. | |
c6fd2807 JG |
94 | |
95 | If unsure, say N. | |
96 | ||
8ad92ba7 | 97 | config SATA_MV |
c6fd2807 | 98 | tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)" |
7bb3c529 | 99 | depends on EXPERIMENTAL |
c6fd2807 JG |
100 | help |
101 | This option enables support for the Marvell Serial ATA family. | |
102 | Currently supports 88SX[56]0[48][01] chips. | |
103 | ||
104 | If unsure, say N. | |
105 | ||
8ad92ba7 | 106 | config SATA_NV |
c6fd2807 | 107 | tristate "NVIDIA SATA support" |
81ce3c4b | 108 | depends on PCI |
c6fd2807 JG |
109 | help |
110 | This option enables support for NVIDIA Serial ATA. | |
111 | ||
112 | If unsure, say N. | |
113 | ||
8ad92ba7 | 114 | config PDC_ADMA |
c6fd2807 | 115 | tristate "Pacific Digital ADMA support" |
81ce3c4b | 116 | depends on PCI |
c6fd2807 JG |
117 | help |
118 | This option enables support for Pacific Digital ADMA controllers | |
119 | ||
120 | If unsure, say N. | |
121 | ||
8ad92ba7 | 122 | config SATA_QSTOR |
c6fd2807 | 123 | tristate "Pacific Digital SATA QStor support" |
81ce3c4b | 124 | depends on PCI |
c6fd2807 JG |
125 | help |
126 | This option enables support for Pacific Digital Serial ATA QStor. | |
127 | ||
128 | If unsure, say N. | |
129 | ||
8ad92ba7 | 130 | config SATA_PROMISE |
c6fd2807 | 131 | tristate "Promise SATA TX2/TX4 support" |
81ce3c4b | 132 | depends on PCI |
c6fd2807 JG |
133 | help |
134 | This option enables support for Promise Serial ATA TX2/TX4. | |
135 | ||
136 | If unsure, say N. | |
137 | ||
8ad92ba7 | 138 | config SATA_SX4 |
c6fd2807 | 139 | tristate "Promise SATA SX4 support" |
81ce3c4b | 140 | depends on PCI && EXPERIMENTAL |
c6fd2807 JG |
141 | help |
142 | This option enables support for Promise Serial ATA SX4. | |
143 | ||
144 | If unsure, say N. | |
145 | ||
8ad92ba7 | 146 | config SATA_SIL |
c6fd2807 | 147 | tristate "Silicon Image SATA support" |
81ce3c4b | 148 | depends on PCI |
c6fd2807 JG |
149 | help |
150 | This option enables support for Silicon Image Serial ATA. | |
151 | ||
152 | If unsure, say N. | |
153 | ||
8ad92ba7 | 154 | config SATA_SIS |
9b14dec5 | 155 | tristate "SiS 964/965/966/180 SATA support" |
81ce3c4b | 156 | depends on PCI |
9b14dec5 | 157 | select PATA_SIS |
c6fd2807 | 158 | help |
a617c09f | 159 | This option enables support for SiS Serial ATA on |
9b14dec5 A |
160 | SiS 964/965/966/180 and Parallel ATA on SiS 180. |
161 | The PATA support for SiS 180 requires additionally to | |
162 | enable the PATA_SIS driver in the config. | |
c6fd2807 JG |
163 | If unsure, say N. |
164 | ||
8ad92ba7 | 165 | config SATA_ULI |
c6fd2807 | 166 | tristate "ULi Electronics SATA support" |
81ce3c4b | 167 | depends on PCI |
c6fd2807 JG |
168 | help |
169 | This option enables support for ULi Electronics SATA. | |
170 | ||
171 | If unsure, say N. | |
172 | ||
8ad92ba7 | 173 | config SATA_VIA |
c6fd2807 | 174 | tristate "VIA SATA support" |
81ce3c4b | 175 | depends on PCI |
c6fd2807 JG |
176 | help |
177 | This option enables support for VIA Serial ATA. | |
178 | ||
179 | If unsure, say N. | |
180 | ||
8ad92ba7 | 181 | config SATA_VITESSE |
c6fd2807 | 182 | tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" |
81ce3c4b | 183 | depends on PCI |
c6fd2807 JG |
184 | help |
185 | This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. | |
186 | ||
187 | If unsure, say N. | |
188 | ||
1fd7a697 TH |
189 | config SATA_INIC162X |
190 | tristate "Initio 162x SATA support (HIGHLY EXPERIMENTAL)" | |
191 | depends on PCI && EXPERIMENTAL | |
192 | help | |
193 | This option enables support for Initio 162x Serial ATA. | |
194 | ||
025621f9 AC |
195 | config PATA_ACPI |
196 | tristate "ACPI firmware driver for PATA" | |
197 | depends on ATA_ACPI | |
198 | help | |
199 | This option enables an ACPI method driver which drives | |
200 | motherboard PATA controller interfaces through the ACPI | |
201 | firmware in the BIOS. This driver can sometimes handle | |
202 | otherwise unsupported hardware. | |
203 | ||
669a5db4 JG |
204 | config PATA_ALI |
205 | tristate "ALi PATA support (Experimental)" | |
206 | depends on PCI && EXPERIMENTAL | |
207 | help | |
208 | This option enables support for the ALi ATA interfaces | |
209 | found on the many ALi chipsets. | |
210 | ||
211 | If unsure, say N. | |
212 | ||
213 | config PATA_AMD | |
942d0947 | 214 | tristate "AMD/NVidia PATA support" |
669a5db4 JG |
215 | depends on PCI |
216 | help | |
217 | This option enables support for the AMD and NVidia PATA | |
218 | interfaces found on the chipsets for Athlon/Athlon64. | |
219 | ||
220 | If unsure, say N. | |
221 | ||
222 | config PATA_ARTOP | |
c645fd34 AC |
223 | tristate "ARTOP 6210/6260 PATA support" |
224 | depends on PCI | |
669a5db4 JG |
225 | help |
226 | This option enables support for ARTOP PATA controllers. | |
227 | ||
228 | If unsure, say N. | |
229 | ||
7c9ef8e4 KNG |
230 | config PATA_AT32 |
231 | tristate "Atmel AVR32 PATA support (Experimental)" | |
232 | depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL | |
233 | help | |
234 | This option enables support for the IDE devices on the | |
235 | Atmel AT32AP platform. | |
236 | ||
237 | If unsure, say N. | |
238 | ||
669a5db4 | 239 | config PATA_ATIIXP |
c645fd34 AC |
240 | tristate "ATI PATA support" |
241 | depends on PCI | |
669a5db4 JG |
242 | help |
243 | This option enables support for the ATI ATA interfaces | |
244 | found on the many ATI chipsets. | |
245 | ||
246 | If unsure, say N. | |
247 | ||
b2248dac AC |
248 | config PATA_CMD640_PCI |
249 | tristate "CMD640 PCI PATA support (Very Experimental)" | |
250 | depends on PCI && EXPERIMENTAL | |
251 | help | |
252 | This option enables support for the CMD640 PCI IDE | |
253 | interface chip. Only the primary channel is currently | |
254 | supported. | |
255 | ||
256 | If unsure, say N. | |
257 | ||
669a5db4 | 258 | config PATA_CMD64X |
c645fd34 AC |
259 | tristate "CMD64x PATA support" |
260 | depends on PCI | |
669a5db4 JG |
261 | help |
262 | This option enables support for the CMD64x series chips | |
263 | except for the CMD640. | |
264 | ||
265 | If unsure, say N. | |
266 | ||
267 | config PATA_CS5520 | |
268 | tristate "CS5510/5520 PATA support" | |
269 | depends on PCI | |
270 | help | |
271 | This option enables support for the Cyrix 5510/5520 | |
272 | companion chip used with the MediaGX/Geode processor family. | |
273 | ||
274 | If unsure, say N. | |
275 | ||
276 | config PATA_CS5530 | |
277 | tristate "CS5530 PATA support (Experimental)" | |
278 | depends on PCI && EXPERIMENTAL | |
279 | help | |
280 | This option enables support for the Cyrix/NatSemi/AMD CS5530 | |
281 | companion chip used with the MediaGX/Geode processor family. | |
282 | ||
283 | If unsure, say N. | |
284 | ||
285 | config PATA_CS5535 | |
286 | tristate "CS5535 PATA support (Experimental)" | |
287 | depends on PCI && X86 && !X86_64 && EXPERIMENTAL | |
288 | help | |
289 | This option enables support for the NatSemi/AMD CS5535 | |
290 | companion chip used with the Geode processor family. | |
291 | ||
292 | If unsure, say N. | |
293 | ||
3957df61 MP |
294 | config PATA_CS5536 |
295 | tristate "CS5536 PATA support (Experimental)" | |
296 | depends on PCI && X86 && !X86_64 && EXPERIMENTAL | |
297 | help | |
298 | This option enables support for the AMD CS5536 | |
299 | companion chip used with the Geode LX processor family. | |
300 | ||
301 | If unsure, say N. | |
302 | ||
669a5db4 JG |
303 | config PATA_CYPRESS |
304 | tristate "Cypress CY82C693 PATA support (Very Experimental)" | |
305 | depends on PCI && EXPERIMENTAL | |
306 | help | |
307 | This option enables support for the Cypress/Contaq CY82C693 | |
308 | chipset found in some Alpha systems | |
309 | ||
310 | If unsure, say N. | |
311 | ||
312 | config PATA_EFAR | |
313 | tristate "EFAR SLC90E66 support" | |
314 | depends on PCI | |
315 | help | |
316 | This option enables support for the EFAR SLC90E66 | |
317 | IDE controller found on some older machines. | |
318 | ||
319 | If unsure, say N. | |
320 | ||
321 | config ATA_GENERIC | |
322 | tristate "Generic ATA support" | |
323 | depends on PCI | |
324 | help | |
325 | This option enables support for generic BIOS configured | |
326 | ATA controllers via the new ATA layer | |
327 | ||
328 | If unsure, say N. | |
329 | ||
330 | config PATA_HPT366 | |
c645fd34 AC |
331 | tristate "HPT 366/368 PATA support" |
332 | depends on PCI | |
669a5db4 JG |
333 | help |
334 | This option enables support for the HPT 366 and 368 | |
335 | PATA controllers via the new ATA layer. | |
336 | ||
337 | If unsure, say N. | |
338 | ||
339 | config PATA_HPT37X | |
942d0947 | 340 | tristate "HPT 370/370A/371/372/374/302 PATA support (Experimental)" |
669a5db4 JG |
341 | depends on PCI && EXPERIMENTAL |
342 | help | |
343 | This option enables support for the majority of the later HPT | |
344 | PATA controllers via the new ATA layer. | |
345 | ||
346 | If unsure, say N. | |
347 | ||
348 | config PATA_HPT3X2N | |
349 | tristate "HPT 372N/302N PATA support (Very Experimental)" | |
350 | depends on PCI && EXPERIMENTAL | |
351 | help | |
352 | This option enables support for the N variant HPT PATA | |
353 | controllers via the new ATA layer | |
354 | ||
355 | If unsure, say N. | |
356 | ||
357 | config PATA_HPT3X3 | |
66e7da4e | 358 | tristate "HPT 343/363 PATA support" |
669a5db4 JG |
359 | depends on PCI |
360 | help | |
361 | This option enables support for the HPT 343/363 | |
362 | PATA controllers via the new ATA layer | |
363 | ||
364 | If unsure, say N. | |
365 | ||
66e7da4e AC |
366 | config PATA_HPT3X3_DMA |
367 | bool "HPT 343/363 DMA support (Experimental)" | |
368 | depends on PATA_HPT3X3 | |
369 | help | |
370 | This option enables DMA support for the HPT343/363 | |
371 | controllers. Enable with care as there are still some | |
372 | problems with DMA on this chipset. | |
373 | ||
669a5db4 | 374 | config PATA_ISAPNP |
942d0947 | 375 | tristate "ISA Plug and Play PATA support (Experimental)" |
669a5db4 JG |
376 | depends on EXPERIMENTAL && ISAPNP |
377 | help | |
378 | This option enables support for ISA plug & play ATA | |
379 | controllers such as those found on old soundcards. | |
380 | ||
381 | If unsure, say N. | |
382 | ||
669a5db4 | 383 | config PATA_IT821X |
942d0947 AC |
384 | tristate "IT8211/2 PATA support" |
385 | depends on PCI | |
669a5db4 JG |
386 | help |
387 | This option enables support for the ITE 8211 and 8212 | |
388 | PATA controllers via the new ATA layer, including RAID | |
389 | mode. | |
390 | ||
391 | If unsure, say N. | |
392 | ||
9b13b682 A |
393 | config PATA_IT8213 |
394 | tristate "IT8213 PATA support (Experimental)" | |
395 | depends on PCI && EXPERIMENTAL | |
396 | help | |
397 | This option enables support for the ITE 821 PATA | |
398 | controllers via the new ATA layer. | |
399 | ||
400 | If unsure, say N. | |
401 | ||
406176ee JG |
402 | config PATA_JMICRON |
403 | tristate "JMicron PATA support" | |
404 | depends on PCI | |
405 | help | |
406 | Enable support for the JMicron IDE controller, via the new | |
407 | ATA layer. | |
408 | ||
409 | If unsure, say N. | |
410 | ||
669a5db4 JG |
411 | config PATA_LEGACY |
412 | tristate "Legacy ISA PATA support (Experimental)" | |
4735ebed | 413 | depends on ISA && EXPERIMENTAL |
669a5db4 JG |
414 | help |
415 | This option enables support for ISA/VLB bus legacy PATA | |
416 | ports and allows them to be accessed via the new ATA layer. | |
417 | ||
418 | If unsure, say N. | |
419 | ||
420 | config PATA_TRIFLEX | |
421 | tristate "Compaq Triflex PATA support" | |
422 | depends on PCI | |
423 | help | |
424 | Enable support for the Compaq 'Triflex' IDE controller as found | |
425 | on many Compaq Pentium-Pro systems, via the new ATA layer. | |
426 | ||
427 | If unsure, say N. | |
428 | ||
75742cb4 AC |
429 | config PATA_MARVELL |
430 | tristate "Marvell PATA support via legacy mode" | |
431 | depends on PCI | |
432 | help | |
433 | This option enables limited support for the Marvell 88SE6145 ATA | |
434 | controller. | |
435 | ||
436 | If unsure, say N. | |
437 | ||
155d2916 SM |
438 | config PATA_MPC52xx |
439 | tristate "Freescale MPC52xx SoC internal IDE" | |
440 | depends on PPC_MPC52xx | |
441 | help | |
442 | This option enables support for integrated IDE controller | |
443 | of the Freescale MPC52xx SoC. | |
444 | ||
445 | If unsure, say N. | |
446 | ||
669a5db4 JG |
447 | config PATA_MPIIX |
448 | tristate "Intel PATA MPIIX support" | |
449 | depends on PCI | |
450 | help | |
451 | This option enables support for MPIIX PATA support. | |
452 | ||
453 | If unsure, say N. | |
454 | ||
455 | config PATA_OLDPIIX | |
942d0947 AC |
456 | tristate "Intel PATA old PIIX support" |
457 | depends on PCI | |
669a5db4 | 458 | help |
942d0947 | 459 | This option enables support for early PIIX PATA support. |
669a5db4 JG |
460 | |
461 | If unsure, say N. | |
462 | ||
463 | config PATA_NETCELL | |
464 | tristate "NETCELL Revolution RAID support" | |
465 | depends on PCI | |
466 | help | |
467 | This option enables support for the Netcell Revolution RAID | |
468 | PATA controller. | |
469 | ||
470 | If unsure, say N. | |
471 | ||
51dbd490 AC |
472 | config PATA_NINJA32 |
473 | tristate "Ninja32/Delkin Cardbus ATA support (Experimental)" | |
474 | depends on PCI && EXPERIMENTAL | |
475 | help | |
476 | This option enables support for the Ninja32, Delkin and | |
477 | possibly other brands of Cardbus ATA adapter | |
478 | ||
479 | If unsure, say N. | |
480 | ||
669a5db4 JG |
481 | config PATA_NS87410 |
482 | tristate "Nat Semi NS87410 PATA support (Experimental)" | |
483 | depends on PCI && EXPERIMENTAL | |
484 | help | |
485 | This option enables support for the National Semiconductor | |
486 | NS87410 PCI-IDE controller. | |
487 | ||
488 | If unsure, say N. | |
489 | ||
c4b5b7b6 AC |
490 | config PATA_NS87415 |
491 | tristate "Nat Semi NS87415 PATA support (Experimental)" | |
492 | depends on PCI && EXPERIMENTAL | |
493 | help | |
494 | This option enables support for the National Semiconductor | |
495 | NS87415 PCI-IDE controller. | |
496 | ||
497 | If unsure, say N. | |
498 | ||
669a5db4 JG |
499 | config PATA_OPTI |
500 | tristate "OPTI621/6215 PATA support (Very Experimental)" | |
501 | depends on PCI && EXPERIMENTAL | |
502 | help | |
503 | This option enables full PIO support for the early Opti ATA | |
504 | controllers found on some old motherboards. | |
505 | ||
506 | If unsure, say N. | |
507 | ||
508 | config PATA_OPTIDMA | |
516e72cb | 509 | tristate "OPTI FireStar PATA support (Very Experimental)" |
669a5db4 JG |
510 | depends on PCI && EXPERIMENTAL |
511 | help | |
512 | This option enables DMA/PIO support for the later OPTi | |
513 | controllers found on some old motherboards and in some | |
3dde6ad8 | 514 | laptops. |
669a5db4 JG |
515 | |
516 | If unsure, say N. | |
517 | ||
518 | config PATA_PCMCIA | |
519 | tristate "PCMCIA PATA support" | |
520 | depends on PCMCIA | |
521 | help | |
522 | This option enables support for PCMCIA ATA interfaces, including | |
523 | compact flash card adapters via the new ATA layer. | |
524 | ||
525 | If unsure, say N. | |
526 | ||
527 | config PATA_PDC_OLD | |
942d0947 | 528 | tristate "Older Promise PATA controller support (Experimental)" |
669a5db4 JG |
529 | depends on PCI && EXPERIMENTAL |
530 | help | |
531 | This option enables support for the Promise 20246, 20262, 20263, | |
532 | 20265 and 20267 adapters. | |
533 | ||
534 | If unsure, say N. | |
535 | ||
536 | config PATA_QDI | |
537 | tristate "QDI VLB PATA support" | |
4735ebed | 538 | depends on ISA |
669a5db4 JG |
539 | help |
540 | Support for QDI 6500 and 6580 PATA controllers on VESA local bus. | |
541 | ||
542 | config PATA_RADISYS | |
942d0947 | 543 | tristate "RADISYS 82600 PATA support (Very Experimental)" |
669a5db4 JG |
544 | depends on PCI && EXPERIMENTAL |
545 | help | |
546 | This option enables support for the RADISYS 82600 | |
547 | PATA controllers via the new ATA layer | |
548 | ||
549 | If unsure, say N. | |
550 | ||
3db691da FF |
551 | config PATA_RB500 |
552 | tristate "RouterBoard 500 PATA CompactFlash support" | |
553 | depends on MIKROTIK_RB500 | |
554 | help | |
555 | This option enables support for the RouterBoard 500 | |
556 | PATA CompactFlash controller. | |
557 | ||
558 | If unsure, say N. | |
559 | ||
669a5db4 JG |
560 | config PATA_RZ1000 |
561 | tristate "PC Tech RZ1000 PATA support" | |
562 | depends on PCI | |
563 | help | |
564 | This option enables basic support for the PC Tech RZ1000/1 | |
565 | PATA controllers via the new ATA layer | |
566 | ||
567 | If unsure, say N. | |
568 | ||
569 | config PATA_SC1200 | |
942d0947 | 570 | tristate "SC1200 PATA support (Very Experimental)" |
669a5db4 JG |
571 | depends on PCI && EXPERIMENTAL |
572 | help | |
573 | This option enables support for the NatSemi/AMD SC1200 SoC | |
574 | companion chip used with the Geode processor family. | |
575 | ||
576 | If unsure, say N. | |
577 | ||
578 | config PATA_SERVERWORKS | |
942d0947 AC |
579 | tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support" |
580 | depends on PCI | |
669a5db4 JG |
581 | help |
582 | This option enables support for the Serverworks OSB4/CSB5/CSB6 and | |
583 | HT1000 PATA controllers, via the new ATA layer. | |
584 | ||
585 | If unsure, say N. | |
586 | ||
587 | config PATA_PDC2027X | |
588 | tristate "Promise PATA 2027x support" | |
589 | depends on PCI | |
590 | help | |
591 | This option enables support for Promise PATA pdc20268 to pdc20277 host adapters. | |
592 | ||
593 | If unsure, say N. | |
594 | ||
595 | config PATA_SIL680 | |
596 | tristate "CMD / Silicon Image 680 PATA support" | |
597 | depends on PCI | |
598 | help | |
599 | This option enables support for CMD / Silicon Image 680 PATA. | |
600 | ||
601 | If unsure, say N. | |
602 | ||
603 | config PATA_SIS | |
604 | tristate "SiS PATA support (Experimental)" | |
605 | depends on PCI && EXPERIMENTAL | |
606 | help | |
607 | This option enables support for SiS PATA controllers | |
608 | ||
609 | If unsure, say N. | |
610 | ||
611 | config PATA_VIA | |
612 | tristate "VIA PATA support" | |
613 | depends on PCI | |
614 | help | |
615 | This option enables support for the VIA PATA interfaces | |
616 | found on the many VIA chipsets. | |
617 | ||
618 | If unsure, say N. | |
619 | ||
620 | config PATA_WINBOND | |
621 | tristate "Winbond SL82C105 PATA support" | |
622 | depends on PCI | |
623 | help | |
624 | This option enables support for SL82C105 PATA devices found in the | |
625 | Netwinder and some other systems | |
626 | ||
627 | If unsure, say N. | |
628 | ||
7e45b0e5 AC |
629 | config PATA_WINBOND_VLB |
630 | tristate "Winbond W83759A VLB PATA support (Experimental)" | |
631 | depends on ISA && EXPERIMENTAL | |
632 | help | |
633 | Support for the Winbond W83759A controller on Vesa Local Bus | |
634 | systems. | |
635 | ||
a20c9e82 PM |
636 | config PATA_PLATFORM |
637 | tristate "Generic platform device PATA support" | |
61f71621 | 638 | depends on EMBEDDED || ARCH_RPC || PPC |
a20c9e82 PM |
639 | help |
640 | This option enables support for generic directly connected ATA | |
641 | devices commonly found on embedded systems. | |
642 | ||
643 | If unsure, say N. | |
61f71621 AV |
644 | |
645 | config PATA_OF_PLATFORM | |
646 | tristate "OpenFirmware platform device PATA support" | |
647 | depends on PATA_PLATFORM && PPC_OF | |
648 | help | |
649 | This option enables support for generic directly connected ATA | |
650 | devices commonly found on embedded systems with OpenFirmware | |
651 | bindings. | |
652 | ||
653 | If unsure, say N. | |
a20c9e82 | 654 | |
73b6a2be RK |
655 | config PATA_ICSIDE |
656 | tristate "Acorn ICS PATA support" | |
657 | depends on ARM && ARCH_ACORN | |
658 | help | |
659 | On Acorn systems, say Y here if you wish to use the ICS PATA | |
660 | interface card. This is not required for ICS partition support. | |
661 | If you are unsure, say N to this. | |
662 | ||
0df0d0a0 AZ |
663 | config PATA_IXP4XX_CF |
664 | tristate "IXP4XX Compact Flash support" | |
665 | depends on ARCH_IXP4XX | |
666 | help | |
667 | This option enables support for a Compact Flash connected on | |
668 | the ixp4xx expansion bus. This driver had been written for | |
669 | Loft/Avila boards in mind but can work with others. | |
670 | ||
671 | If unsure, say N. | |
672 | ||
a619f981 AI |
673 | config PATA_SCC |
674 | tristate "Toshiba's Cell Reference Set IDE support" | |
aeb9362a | 675 | depends on PCI && PPC_CELLEB |
a619f981 AI |
676 | help |
677 | This option enables support for the built-in IDE controller on | |
678 | Toshiba Cell Reference Board. | |
679 | ||
680 | If unsure, say N. | |
681 | ||
d830d173 SZ |
682 | config PATA_BF54X |
683 | tristate "Blackfin 54x ATAPI support" | |
684 | depends on BF542 || BF548 || BF549 | |
685 | help | |
686 | This option enables support for the built-in ATAPI controller on | |
687 | Blackfin 54x family chips. | |
688 | ||
689 | If unsure, say N. | |
690 | ||
127102ae | 691 | endif # ATA_SFF |
b196fc69 | 692 | endif # ATA |