Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # For a description of the syntax of this configuration file, | |
3 | # see Documentation/kbuild/kconfig-language.txt. | |
4 | # | |
5 | ||
6 | mainmenu "Linux/SuperH Kernel Configuration" | |
7 | ||
8 | config SUPERH | |
9 | bool | |
10 | default y | |
7a440c95 | 11 | select EMBEDDED |
1da177e4 LT |
12 | help |
13 | The SuperH is a RISC processor targeted for use in embedded systems | |
14 | and consumer electronics; it was also used in the Sega Dreamcast | |
15 | gaming console. The SuperH port has a home page at | |
16 | <http://www.linux-sh.org/>. | |
17 | ||
1da177e4 LT |
18 | config RWSEM_GENERIC_SPINLOCK |
19 | bool | |
20 | default y | |
21 | ||
22 | config RWSEM_XCHGADD_ALGORITHM | |
23 | bool | |
24 | ||
fa691511 PM |
25 | config GENERIC_BUG |
26 | def_bool y | |
27 | depends on BUG | |
28 | ||
e2268c71 AM |
29 | config GENERIC_FIND_NEXT_BIT |
30 | bool | |
31 | default y | |
32 | ||
33 | config GENERIC_HWEIGHT | |
34 | bool | |
35 | default y | |
36 | ||
1da177e4 LT |
37 | config GENERIC_HARDIRQS |
38 | bool | |
39 | default y | |
40 | ||
41 | config GENERIC_IRQ_PROBE | |
42 | bool | |
43 | default y | |
44 | ||
45 | config GENERIC_CALIBRATE_DELAY | |
46 | bool | |
47 | default y | |
48 | ||
cad82448 PM |
49 | config GENERIC_IOMAP |
50 | bool | |
51 | ||
45882145 PM |
52 | config GENERIC_TIME |
53 | def_bool n | |
54 | ||
57be2b48 PM |
55 | config GENERIC_CLOCKEVENTS |
56 | def_bool n | |
57 | ||
357d5946 PM |
58 | config SYS_SUPPORTS_PM |
59 | bool | |
60 | ||
0a9b0db1 PM |
61 | config SYS_SUPPORTS_APM_EMULATION |
62 | bool | |
357d5946 PM |
63 | select SYS_SUPPORTS_PM |
64 | ||
65 | config SYS_SUPPORTS_SMP | |
66 | bool | |
67 | ||
68 | config SYS_SUPPORTS_NUMA | |
69 | bool | |
70 | ||
71 | config SYS_SUPPORTS_PCI | |
72 | bool | |
0a9b0db1 | 73 | |
a08b6b79 Z |
74 | config ARCH_MAY_HAVE_PC_FDC |
75 | bool | |
a08b6b79 | 76 | |
afbfb52e PM |
77 | config STACKTRACE_SUPPORT |
78 | bool | |
79 | default y | |
80 | ||
81 | config LOCKDEP_SUPPORT | |
82 | bool | |
83 | default y | |
84 | ||
f0d1b0b3 DH |
85 | config ARCH_HAS_ILOG2_U32 |
86 | bool | |
87 | default n | |
88 | ||
89 | config ARCH_HAS_ILOG2_U64 | |
90 | bool | |
91 | default n | |
92 | ||
e257ad06 PM |
93 | config ARCH_NO_VIRT_TO_BUS |
94 | def_bool y | |
95 | ||
1da177e4 LT |
96 | source "init/Kconfig" |
97 | ||
98 | menu "System type" | |
99 | ||
f3d22298 PM |
100 | source "arch/sh/mm/Kconfig" |
101 | ||
102 | menu "Processor features" | |
bc8fb5d0 | 103 | |
1da177e4 | 104 | choice |
f3d22298 PM |
105 | prompt "Endianess selection" |
106 | default CPU_LITTLE_ENDIAN | |
107 | help | |
108 | Some SuperH machines can be configured for either little or big | |
109 | endian byte order. These modes require different kernels. | |
110 | ||
111 | config CPU_LITTLE_ENDIAN | |
112 | bool "Little Endian" | |
113 | ||
114 | config CPU_BIG_ENDIAN | |
115 | bool "Big Endian" | |
116 | ||
117 | endchoice | |
118 | ||
119 | config SH_FPU | |
120 | bool "FPU support" | |
1db4e9bb | 121 | depends on CPU_HAS_FPU |
f3d22298 PM |
122 | default y |
123 | help | |
124 | Selecting this option will enable support for SH processors that | |
125 | have FPU units (ie, SH77xx). | |
126 | ||
127 | This option must be set in order to enable the FPU. | |
128 | ||
129 | config SH_FPU_EMU | |
130 | bool "FPU emulation support" | |
131 | depends on !SH_FPU && EXPERIMENTAL | |
132 | default n | |
133 | help | |
134 | Selecting this option will enable support for software FPU emulation. | |
135 | Most SH-3 users will want to say Y here, whereas most SH-4 users will | |
136 | want to say N. | |
137 | ||
138 | config SH_DSP | |
139 | bool "DSP support" | |
ac79fd58 PM |
140 | depends on CPU_HAS_DSP |
141 | default y | |
f3d22298 PM |
142 | help |
143 | Selecting this option will enable support for SH processors that | |
144 | have DSP units (ie, SH2-DSP, SH3-DSP, and SH4AL-DSP). | |
145 | ||
146 | This option must be set in order to enable the DSP. | |
147 | ||
148 | config SH_ADC | |
149 | bool "ADC support" | |
150 | depends on CPU_SH3 | |
151 | default y | |
152 | help | |
153 | Selecting this option will allow the Linux kernel to use SH3 on-chip | |
154 | ADC module. | |
155 | ||
156 | If unsure, say N. | |
157 | ||
158 | config SH_STORE_QUEUES | |
159 | bool "Support for Store Queues" | |
160 | depends on CPU_SH4 | |
161 | help | |
162 | Selecting this option will enable an in-kernel API for manipulating | |
163 | the store queues integrated in the SH-4 processors. | |
164 | ||
165 | config SPECULATIVE_EXECUTION | |
166 | bool "Speculative subroutine return" | |
167 | depends on CPU_SUBTYPE_SH7780 && EXPERIMENTAL | |
168 | help | |
169 | This enables support for a speculative instruction fetch for | |
170 | subroutine return. There are various pitfalls associated with | |
171 | this, as outlined in the SH7780 hardware manual. | |
172 | ||
173 | If unsure, say N. | |
174 | ||
175 | config CPU_HAS_INTEVT | |
176 | bool | |
177 | ||
f3d22298 PM |
178 | config CPU_HAS_MASKREG_IRQ |
179 | bool | |
180 | ||
f3d22298 PM |
181 | config CPU_HAS_IPR_IRQ |
182 | bool | |
183 | ||
184 | config CPU_HAS_SR_RB | |
185 | bool "CPU has SR.RB" | |
186 | depends on CPU_SH3 || CPU_SH4 | |
187 | default y | |
188 | help | |
189 | This will enable the use of SR.RB register bank usage. Processors | |
190 | that are lacking this bit must have another method in place for | |
191 | accomplishing what is taken care of by the banked registers. | |
192 | ||
193 | See <file:Documentation/sh/register-banks.txt> for further | |
194 | information on SR.RB and register banking in the kernel in general. | |
195 | ||
196 | config CPU_HAS_PTEA | |
197 | bool | |
198 | ||
ac79fd58 PM |
199 | config CPU_HAS_DSP |
200 | bool | |
201 | ||
1db4e9bb PM |
202 | config CPU_HAS_FPU |
203 | bool | |
204 | ||
f3d22298 PM |
205 | endmenu |
206 | ||
207 | menu "Board support" | |
208 | ||
209 | config SOLUTION_ENGINE | |
210 | bool | |
1da177e4 LT |
211 | |
212 | config SH_SOLUTION_ENGINE | |
213 | bool "SolutionEngine" | |
bc8fb5d0 | 214 | select SOLUTION_ENGINE |
56386f64 | 215 | select CPU_HAS_IPR_IRQ |
f3d22298 | 216 | depends on CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7750 |
1da177e4 LT |
217 | help |
218 | Select SolutionEngine if configuring for a Hitachi SH7709 | |
219 | or SH7750 evaluation board. | |
220 | ||
f3d22298 PM |
221 | config SH_7206_SOLUTION_ENGINE |
222 | bool "SolutionEngine7206" | |
223 | select SOLUTION_ENGINE | |
224 | depends on CPU_SUBTYPE_SH7206 | |
225 | help | |
226 | Select 7206 SolutionEngine if configuring for a Hitachi SH7206 | |
227 | evaluation board. | |
228 | ||
229 | config SH_7619_SOLUTION_ENGINE | |
230 | bool "SolutionEngine7619" | |
231 | select SOLUTION_ENGINE | |
232 | depends on CPU_SUBTYPE_SH7619 | |
233 | help | |
234 | Select 7619 SolutionEngine if configuring for a Hitachi SH7619 | |
235 | evaluation board. | |
236 | ||
6865f0ea RS |
237 | config SH_7722_SOLUTION_ENGINE |
238 | bool "SolutionEngine7722" | |
239 | select SOLUTION_ENGINE | |
f3d22298 | 240 | depends on CPU_SUBTYPE_SH7722 |
6865f0ea RS |
241 | help |
242 | Select 7722 SolutionEngine if configuring for a Hitachi SH772 | |
243 | evaluation board. | |
244 | ||
1da177e4 LT |
245 | config SH_7751_SOLUTION_ENGINE |
246 | bool "SolutionEngine7751" | |
bc8fb5d0 | 247 | select SOLUTION_ENGINE |
56386f64 | 248 | select CPU_HAS_IPR_IRQ |
f3d22298 | 249 | depends on CPU_SUBTYPE_SH7751 |
1da177e4 LT |
250 | help |
251 | Select 7751 SolutionEngine if configuring for a Hitachi SH7751 | |
252 | evaluation board. | |
b7576230 NI |
253 | |
254 | config SH_7780_SOLUTION_ENGINE | |
255 | bool "SolutionEngine7780" | |
256 | select SOLUTION_ENGINE | |
357d5946 | 257 | select SYS_SUPPORTS_PCI |
f3d22298 | 258 | depends on CPU_SUBTYPE_SH7780 |
b7576230 NI |
259 | help |
260 | Select 7780 SolutionEngine if configuring for a Renesas SH7780 | |
261 | evaluation board. | |
1da177e4 | 262 | |
bc8fb5d0 PM |
263 | config SH_7343_SOLUTION_ENGINE |
264 | bool "SolutionEngine7343" | |
265 | select SOLUTION_ENGINE | |
f3d22298 | 266 | depends on CPU_SUBTYPE_SH7343 |
bc8fb5d0 PM |
267 | help |
268 | Select 7343 SolutionEngine if configuring for a Hitachi | |
269 | SH7343 (SH-Mobile 3AS) evaluation board. | |
1da177e4 | 270 | |
1da177e4 LT |
271 | config SH_7751_SYSTEMH |
272 | bool "SystemH7751R" | |
f3d22298 | 273 | depends on CPU_SUBTYPE_SH7751R |
1da177e4 LT |
274 | help |
275 | Select SystemH if you are configuring for a Renesas SystemH | |
276 | 7751R evaluation board. | |
277 | ||
cad82448 PM |
278 | config SH_HP6XX |
279 | bool "HP6XX" | |
0a9b0db1 | 280 | select SYS_SUPPORTS_APM_EMULATION |
357d5946 | 281 | select HD6446X_SERIES |
f3d22298 | 282 | depends on CPU_SUBTYPE_SH7709 |
1da177e4 | 283 | help |
cad82448 | 284 | Select HP6XX if configuring for a HP jornada HP6xx. |
1da177e4 LT |
285 | More information (hardware only) at |
286 | <http://www.hp.com/jornada/>. | |
287 | ||
1da177e4 LT |
288 | config SH_DREAMCAST |
289 | bool "Dreamcast" | |
357d5946 | 290 | select SYS_SUPPORTS_PCI |
f3d22298 | 291 | depends on CPU_SUBTYPE_SH7091 |
1da177e4 LT |
292 | help |
293 | Select Dreamcast if configuring for a SEGA Dreamcast. | |
294 | More information at | |
295 | <http://www.m17n.org/linux-sh/dreamcast/>. There is a | |
296 | Dreamcast project is at <http://linuxdc.sourceforge.net/>. | |
297 | ||
1da177e4 | 298 | config SH_MPC1211 |
cad82448 | 299 | bool "Interface MPC1211" |
f3d22298 | 300 | depends on CPU_SUBTYPE_SH7751 && BROKEN |
cad82448 PM |
301 | help |
302 | CTP/PCI-SH02 is a CPU module computer that is produced | |
303 | by Interface Corporation. | |
304 | More information at <http://www.interface.co.jp> | |
1da177e4 LT |
305 | |
306 | config SH_SH03 | |
cad82448 | 307 | bool "Interface CTP/PCI-SH03" |
d59645d6 | 308 | depends on CPU_SUBTYPE_SH7751 |
56386f64 | 309 | select CPU_HAS_IPR_IRQ |
357d5946 | 310 | select SYS_SUPPORTS_PCI |
1da177e4 | 311 | help |
cad82448 | 312 | CTP/PCI-SH03 is a CPU module computer that is produced |
1da177e4 | 313 | by Interface Corporation. |
1da177e4 LT |
314 | More information at <http://www.interface.co.jp> |
315 | ||
316 | config SH_SECUREEDGE5410 | |
317 | bool "SecureEdge5410" | |
f3d22298 | 318 | depends on CPU_SUBTYPE_SH7751R |
56386f64 | 319 | select CPU_HAS_IPR_IRQ |
357d5946 | 320 | select SYS_SUPPORTS_PCI |
1da177e4 LT |
321 | help |
322 | Select SecureEdge5410 if configuring for a SnapGear SH board. | |
323 | This includes both the OEM SecureEdge products as well as the | |
324 | SME product line. | |
325 | ||
326 | config SH_HS7751RVOIP | |
327 | bool "HS7751RVOIP" | |
f3d22298 | 328 | depends on CPU_SUBTYPE_SH7751R |
1da177e4 LT |
329 | help |
330 | Select HS7751RVOIP if configuring for a Renesas Technology | |
331 | Sales VoIP board. | |
332 | ||
91b91d01 PM |
333 | config SH_7710VOIPGW |
334 | bool "SH7710-VOIP-GW" | |
f3d22298 | 335 | depends on CPU_SUBTYPE_SH7710 |
91b91d01 PM |
336 | help |
337 | Select this option to build a kernel for the SH7710 based | |
338 | VOIP GW. | |
339 | ||
1da177e4 LT |
340 | config SH_RTS7751R2D |
341 | bool "RTS7751R2D" | |
f3d22298 | 342 | depends on CPU_SUBTYPE_SH7751R |
357d5946 | 343 | select SYS_SUPPORTS_PCI |
1da177e4 LT |
344 | help |
345 | Select RTS7751R2D if configuring for a Renesas Technology | |
346 | Sales SH-Graphics board. | |
347 | ||
32351a28 PM |
348 | config SH_HIGHLANDER |
349 | bool "Highlander" | |
f3d22298 | 350 | depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 |
357d5946 | 351 | select SYS_SUPPORTS_PCI |
cad82448 | 352 | |
1da177e4 LT |
353 | config SH_EDOSK7705 |
354 | bool "EDOSK7705" | |
f3d22298 | 355 | depends on CPU_SUBTYPE_SH7705 |
1da177e4 LT |
356 | |
357 | config SH_SH4202_MICRODEV | |
358 | bool "SH4-202 MicroDev" | |
f3d22298 | 359 | depends on CPU_SUBTYPE_SH4_202 |
1da177e4 LT |
360 | help |
361 | Select SH4-202 MicroDev if configuring for a SuperH MicroDev board | |
362 | with an SH4-202 CPU. | |
363 | ||
cad82448 PM |
364 | config SH_LANDISK |
365 | bool "LANDISK" | |
f3d22298 | 366 | depends on CPU_SUBTYPE_SH7751R |
357d5946 | 367 | select SYS_SUPPORTS_PCI |
cad82448 PM |
368 | help |
369 | I-O DATA DEVICE, INC. "LANDISK Series" support. | |
370 | ||
371 | config SH_TITAN | |
372 | bool "TITAN" | |
f3d22298 | 373 | depends on CPU_SUBTYPE_SH7751R |
56386f64 | 374 | select CPU_HAS_IPR_IRQ |
357d5946 | 375 | select SYS_SUPPORTS_PCI |
cad82448 PM |
376 | help |
377 | Select Titan if you are configuring for a Nimble Microsystems | |
378 | NetEngine NP51R. | |
379 | ||
51e22e7a TY |
380 | config SH_SHMIN |
381 | bool "SHMIN" | |
f3d22298 | 382 | depends on CPU_SUBTYPE_SH7706 |
56386f64 | 383 | select CPU_HAS_IPR_IRQ |
51e22e7a | 384 | help |
3cb2fccc | 385 | Select SHMIN if configuring for the SHMIN board. |
51e22e7a | 386 | |
c86c5a91 NI |
387 | config SH_LBOX_RE2 |
388 | bool "L-BOX RE2" | |
f3d22298 | 389 | depends on CPU_SUBTYPE_SH7751R |
357d5946 | 390 | select SYS_SUPPORTS_PCI |
c86c5a91 NI |
391 | help |
392 | Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2. | |
9d4436a6 | 393 | |
94807a33 PM |
394 | config SH_X3PROTO |
395 | bool "SH-X3 Prototype board" | |
396 | depends on CPU_SUBTYPE_SHX3 | |
397 | ||
ded5431f MB |
398 | config SH_MAGIC_PANEL_R2 |
399 | bool "Magic Panel R2" | |
400 | depends on CPU_SUBTYPE_SH7720 | |
401 | help | |
402 | Select Magic Panel R2 if configuring for Magic Panel R2. | |
403 | ||
f3d22298 | 404 | endmenu |
1da177e4 | 405 | |
32351a28 PM |
406 | source "arch/sh/boards/renesas/hs7751rvoip/Kconfig" |
407 | source "arch/sh/boards/renesas/rts7751r2d/Kconfig" | |
408 | source "arch/sh/boards/renesas/r7780rp/Kconfig" | |
ded5431f | 409 | source "arch/sh/boards/magicpanelr2/Kconfig" |
32351a28 | 410 | |
32351a28 PM |
411 | menu "Timer and clock configuration" |
412 | ||
cad82448 PM |
413 | config SH_TMU |
414 | bool "TMU timer support" | |
9d4436a6 | 415 | depends on CPU_SH3 || CPU_SH4 |
57be2b48 PM |
416 | select GENERIC_TIME |
417 | select GENERIC_CLOCKEVENTS | |
1da177e4 | 418 | default y |
1da177e4 | 419 | help |
cad82448 | 420 | This enables the use of the TMU as the system timer. |
1da177e4 | 421 | |
9d4436a6 YS |
422 | config SH_CMT |
423 | bool "CMT timer support" | |
424 | depends on CPU_SH2 | |
425 | default y | |
426 | help | |
427 | This enables the use of the CMT as the system timer. | |
428 | ||
429 | config SH_MTU2 | |
430 | bool "MTU2 timer support" | |
431 | depends on CPU_SH2A | |
432 | default n | |
433 | help | |
434 | This enables the use of the MTU2 as the system timer. | |
435 | ||
417528a2 PM |
436 | config SH_TIMER_IRQ |
437 | int | |
32351a28 | 438 | default "28" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 |
417528a2 PM |
439 | default "86" if CPU_SUBTYPE_SH7619 |
440 | default "140" if CPU_SUBTYPE_SH7206 | |
441 | default "16" | |
442 | ||
cad82448 PM |
443 | config SH_PCLK_FREQ |
444 | int "Peripheral clock frequency (in Hz)" | |
870e8a24 | 445 | default "27000000" if CPU_SUBTYPE_SH7343 |
9d4436a6 | 446 | default "31250000" if CPU_SUBTYPE_SH7619 |
05627486 | 447 | default "32000000" if CPU_SUBTYPE_SH7722 |
d89ddd1c | 448 | default "33333333" if CPU_SUBTYPE_SH7770 || \ |
9d4436a6 YS |
449 | CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \ |
450 | CPU_SUBTYPE_SH7206 | |
05627486 | 451 | default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R |
cad82448 | 452 | default "66000000" if CPU_SUBTYPE_SH4_202 |
05627486 | 453 | default "50000000" |
1da177e4 | 454 | help |
cad82448 PM |
455 | This option is used to specify the peripheral clock frequency. |
456 | This is necessary for determining the reference clock value on | |
457 | platforms lacking an RTC. | |
1da177e4 | 458 | |
9d4436a6 YS |
459 | config SH_CLK_MD |
460 | int "CPU Mode Pin Setting" | |
461 | depends on CPU_SUBTYPE_SH7619 || CPU_SUBTYPE_SH7206 | |
357d5946 PM |
462 | default 6 if CPU_SUBTYPE_SH7206 |
463 | default 5 if CPU_SUBTYPE_SH7619 | |
464 | default 0 | |
9d4436a6 | 465 | help |
11cbb70e | 466 | MD2 - MD0 pin setting. |
9d4436a6 | 467 | |
57be2b48 PM |
468 | source "kernel/time/Kconfig" |
469 | ||
32351a28 PM |
470 | endmenu |
471 | ||
cad82448 PM |
472 | menu "CPU Frequency scaling" |
473 | ||
474 | source "drivers/cpufreq/Kconfig" | |
1da177e4 | 475 | |
cad82448 PM |
476 | config SH_CPU_FREQ |
477 | tristate "SuperH CPU Frequency driver" | |
cb5ec75b | 478 | depends on CPU_FREQ |
cad82448 | 479 | select CPU_FREQ_TABLE |
1da177e4 | 480 | help |
cad82448 PM |
481 | This adds the cpufreq driver for SuperH. At present, only |
482 | the SH-4 is supported. | |
1da177e4 | 483 | |
cad82448 | 484 | For details, take a look at <file:Documentation/cpu-freq>. |
1da177e4 LT |
485 | |
486 | If unsure, say N. | |
487 | ||
cad82448 PM |
488 | endmenu |
489 | ||
9f5e8eee PM |
490 | source "arch/sh/drivers/Kconfig" |
491 | ||
cad82448 | 492 | endmenu |
1da177e4 | 493 | |
cad82448 PM |
494 | config ISA_DMA_API |
495 | bool | |
05efc67d | 496 | depends on SH_MPC1211 |
cad82448 | 497 | default y |
1da177e4 | 498 | |
cad82448 PM |
499 | menu "Kernel features" |
500 | ||
91b91d01 PM |
501 | source kernel/Kconfig.hz |
502 | ||
cad82448 PM |
503 | config KEXEC |
504 | bool "kexec system call (EXPERIMENTAL)" | |
505 | depends on EXPERIMENTAL | |
1da177e4 | 506 | help |
cad82448 PM |
507 | kexec is a system call that implements the ability to shutdown your |
508 | current kernel, and to start another kernel. It is like a reboot | |
1f1332f7 | 509 | but it is independent of the system firmware. And like a reboot |
cad82448 PM |
510 | you can start any kernel with it, not just Linux. |
511 | ||
1f1332f7 | 512 | The name comes from the similarity to the exec system call. |
cad82448 PM |
513 | |
514 | It is an ongoing process to be certain the hardware in a machine | |
515 | is properly shutdown, so do not be surprised if this code does not | |
516 | initially work for you. It may help to enable device hotplugging | |
517 | support. As of this writing the exact hardware interface is | |
518 | strongly in flux, so no good recommendation can be made. | |
519 | ||
4d5ade5b PM |
520 | config CRASH_DUMP |
521 | bool "kernel crash dumps (EXPERIMENTAL)" | |
522 | depends on EXPERIMENTAL | |
523 | help | |
524 | Generate crash dump after being started by kexec. | |
525 | This should be normally only set in special crash dump kernels | |
526 | which are loaded in the main kernel with kexec-tools into | |
527 | a specially reserved region and then later executed after | |
528 | a crash by kdump/kexec. The crash dump kernel must be compiled | |
529 | to a memory address not used by the main kernel using | |
530 | MEMORY_START. | |
531 | ||
532 | For more details see Documentation/kdump/kdump.txt | |
533 | ||
1da177e4 LT |
534 | config SMP |
535 | bool "Symmetric multi-processing support" | |
357d5946 | 536 | depends on SYS_SUPPORTS_SMP |
1da177e4 LT |
537 | ---help--- |
538 | This enables support for systems with more than one CPU. If you have | |
539 | a system with only one CPU, like most personal computers, say N. If | |
540 | you have a system with more than one CPU, say Y. | |
541 | ||
542 | If you say N here, the kernel will run on single and multiprocessor | |
543 | machines, but will use only one CPU of a multiprocessor machine. If | |
544 | you say Y here, the kernel will run on many, but not all, | |
545 | singleprocessor machines. On a singleprocessor machine, the kernel | |
546 | will run faster if you say N here. | |
547 | ||
548 | People using multiprocessor machines who say Y here should also say | |
549 | Y to "Enhanced Real Time Clock Support", below. | |
550 | ||
551 | See also the <file:Documentation/smp.txt>, | |
552 | <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available | |
553 | at <http://www.tldp.org/docs.html#howto>. | |
554 | ||
555 | If you don't know what to do here, say N. | |
556 | ||
557 | config NR_CPUS | |
558 | int "Maximum number of CPUs (2-32)" | |
559 | range 2 32 | |
560 | depends on SMP | |
2b1bd1ac | 561 | default "4" if CPU_SHX3 |
1da177e4 LT |
562 | default "2" |
563 | help | |
564 | This allows you to specify the maximum number of CPUs which this | |
565 | kernel will support. The maximum supported value is 32 and the | |
566 | minimum value which makes sense is 2. | |
567 | ||
568 | This is purely to save memory - each supported CPU adds | |
569 | approximately eight kilobytes to the kernel image. | |
570 | ||
91b91d01 PM |
571 | source "kernel/Kconfig.preempt" |
572 | ||
c80d79d7 YG |
573 | config NODES_SHIFT |
574 | int | |
575 | default "1" | |
576 | depends on NEED_MULTIPLE_NODES | |
577 | ||
cad82448 | 578 | endmenu |
1da177e4 | 579 | |
cad82448 | 580 | menu "Boot options" |
1da177e4 | 581 | |
cad82448 PM |
582 | config ZERO_PAGE_OFFSET |
583 | hex "Zero page offset" | |
584 | default "0x00004000" if SH_MPC1211 || SH_SH03 | |
7a847f81 PM |
585 | default "0x00010000" if PAGE_SIZE_64KB |
586 | default "0x00002000" if PAGE_SIZE_8KB | |
cad82448 | 587 | default "0x00001000" |
1da177e4 | 588 | help |
cad82448 | 589 | This sets the default offset of zero page. |
1da177e4 | 590 | |
cad82448 PM |
591 | config BOOT_LINK_OFFSET |
592 | hex "Link address offset for booting" | |
593 | default "0x00800000" | |
594 | help | |
595 | This option allows you to set the link address offset of the zImage. | |
596 | This can be useful if you are on a board which has a small amount of | |
597 | memory. | |
1da177e4 | 598 | |
cad82448 PM |
599 | config UBC_WAKEUP |
600 | bool "Wakeup UBC on startup" | |
357d5946 | 601 | depends on CPU_SH4 |
cad82448 PM |
602 | help |
603 | Selecting this option will wakeup the User Break Controller (UBC) on | |
604 | startup. Although the UBC is left in an awake state when the processor | |
605 | comes up, some boot loaders misbehave by putting the UBC to sleep in a | |
606 | power saving state, which causes issues with things like ptrace(). | |
1da177e4 | 607 | |
cad82448 | 608 | If unsure, say N. |
1da177e4 | 609 | |
cad82448 PM |
610 | config CMDLINE_BOOL |
611 | bool "Default bootloader kernel arguments" | |
1da177e4 | 612 | |
cad82448 PM |
613 | config CMDLINE |
614 | string "Initial kernel command string" | |
615 | depends on CMDLINE_BOOL | |
616 | default "console=ttySC1,115200" | |
1da177e4 LT |
617 | |
618 | endmenu | |
619 | ||
cad82448 | 620 | menu "Bus options" |
1da177e4 LT |
621 | |
622 | # Even on SuperH devices which don't have an ISA bus, | |
623 | # this variable helps the PCMCIA modules handle | |
624 | # IRQ requesting properly -- Greg Banks. | |
625 | # | |
626 | # Though we're generally not interested in it when | |
627 | # we're not using PCMCIA, so we make it dependent on | |
628 | # PCMCIA outright. -- PFM. | |
629 | config ISA | |
357d5946 PM |
630 | def_bool y |
631 | depends on PCMCIA && HD6446X_SERIES | |
1da177e4 LT |
632 | help |
633 | Find out whether you have ISA slots on your motherboard. ISA is the | |
634 | name of a bus system, i.e. the way the CPU talks to the other stuff | |
635 | inside your box. Other bus systems are PCI, EISA, MicroChannel | |
636 | (MCA) or VESA. ISA is an older system, now being displaced by PCI; | |
637 | newer boards don't support it. If you have ISA, say Y, otherwise N. | |
638 | ||
639 | config EISA | |
640 | bool | |
641 | ---help--- | |
642 | The Extended Industry Standard Architecture (EISA) bus was | |
643 | developed as an open alternative to the IBM MicroChannel bus. | |
644 | ||
645 | The EISA bus provided some of the features of the IBM MicroChannel | |
646 | bus while maintaining backward compatibility with cards made for | |
647 | the older ISA bus. The EISA bus saw limited use between 1988 and | |
648 | 1995 when it was made obsolete by the PCI bus. | |
649 | ||
650 | Say Y here if you are building a kernel for an EISA-based machine. | |
651 | ||
652 | Otherwise, say N. | |
653 | ||
654 | config MCA | |
655 | bool | |
656 | help | |
657 | MicroChannel Architecture is found in some IBM PS/2 machines and | |
658 | laptops. It is a bus system similar to PCI or ISA. See | |
659 | <file:Documentation/mca.txt> (and especially the web page given | |
660 | there) before attempting to build an MCA bus kernel. | |
661 | ||
662 | config SBUS | |
663 | bool | |
664 | ||
cad82448 PM |
665 | config SUPERHYWAY |
666 | tristate "SuperHyway Bus support" | |
667 | depends on CPU_SUBTYPE_SH4_202 | |
1da177e4 | 668 | |
824e55f9 PM |
669 | config CF_ENABLER |
670 | bool "Compact Flash Enabler support" | |
671 | depends on SOLUTION_ENGINE || SH_SH03 | |
672 | ---help--- | |
673 | Compact Flash is a small, removable mass storage device introduced | |
674 | in 1994 originally as a PCMCIA device. If you say `Y' here, you | |
675 | compile in support for Compact Flash devices directly connected to | |
676 | a SuperH processor. A Compact Flash FAQ is available at | |
677 | <http://www.compactflash.org/faqs/faq.htm>. | |
678 | ||
679 | If your board has "Directly Connected" CompactFlash at area 5 or 6, | |
680 | you may want to enable this option. Then, you can use CF as | |
681 | primary IDE drive (only tested for SanDisk). | |
682 | ||
683 | If in doubt, select 'N'. | |
684 | ||
685 | choice | |
686 | prompt "Compact Flash Connection Area" | |
687 | depends on CF_ENABLER | |
688 | default CF_AREA6 | |
689 | ||
690 | config CF_AREA5 | |
691 | bool "Area5" | |
692 | help | |
693 | If your board has "Directly Connected" CompactFlash, You should | |
694 | select the area where your CF is connected to. | |
695 | ||
696 | - "Area5" if CompactFlash is connected to Area 5 (0x14000000) | |
697 | - "Area6" if it is connected to Area 6 (0x18000000) | |
698 | ||
699 | "Area6" will work for most boards. | |
700 | ||
701 | config CF_AREA6 | |
702 | bool "Area6" | |
703 | ||
704 | endchoice | |
705 | ||
706 | config CF_BASE_ADDR | |
707 | hex | |
708 | depends on CF_ENABLER | |
709 | default "0xb8000000" if CF_AREA6 | |
710 | default "0xb4000000" if CF_AREA5 | |
711 | ||
1da177e4 LT |
712 | source "arch/sh/drivers/pci/Kconfig" |
713 | ||
714 | source "drivers/pci/Kconfig" | |
715 | ||
716 | source "drivers/pcmcia/Kconfig" | |
717 | ||
718 | source "drivers/pci/hotplug/Kconfig" | |
719 | ||
720 | endmenu | |
721 | ||
722 | menu "Executable file formats" | |
723 | ||
724 | source "fs/Kconfig.binfmt" | |
725 | ||
726 | endmenu | |
727 | ||
3aa770e7 | 728 | menu "Power management options (EXPERIMENTAL)" |
357d5946 | 729 | depends on EXPERIMENTAL && SYS_SUPPORTS_PM |
3aa770e7 AS |
730 | |
731 | source kernel/power/Kconfig | |
732 | ||
3aa770e7 AS |
733 | endmenu |
734 | ||
d5950b43 SR |
735 | source "net/Kconfig" |
736 | ||
1da177e4 LT |
737 | source "drivers/Kconfig" |
738 | ||
739 | source "fs/Kconfig" | |
740 | ||
741 | source "arch/sh/oprofile/Kconfig" | |
742 | ||
743 | source "arch/sh/Kconfig.debug" | |
744 | ||
745 | source "security/Kconfig" | |
746 | ||
747 | source "crypto/Kconfig" | |
748 | ||
749 | source "lib/Kconfig" |