Commit | Line | Data |
---|---|---|
aa1e6374 GS |
1 | /* |
2 | * The file intends to implement the platform dependent EEH operations on pseries. | |
3 | * Actually, the pseries platform is built based on RTAS heavily. That means the | |
4 | * pseries platform dependent EEH operations will be built on RTAS calls. The functions | |
5 | * are devired from arch/powerpc/platforms/pseries/eeh.c and necessary cleanup has | |
6 | * been done. | |
7 | * | |
8 | * Copyright Benjamin Herrenschmidt & Gavin Shan, IBM Corporation 2011. | |
9 | * Copyright IBM Corporation 2001, 2005, 2006 | |
10 | * Copyright Dave Engebretsen & Todd Inglett 2001 | |
11 | * Copyright Linas Vepstas 2005, 2006 | |
12 | * | |
13 | * This program is free software; you can redistribute it and/or modify | |
14 | * it under the terms of the GNU General Public License as published by | |
15 | * the Free Software Foundation; either version 2 of the License, or | |
16 | * (at your option) any later version. | |
17 | * | |
18 | * This program is distributed in the hope that it will be useful, | |
19 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
20 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
21 | * GNU General Public License for more details. | |
22 | * | |
23 | * You should have received a copy of the GNU General Public License | |
24 | * along with this program; if not, write to the Free Software | |
25 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
26 | */ | |
27 | ||
28 | #include <linux/atomic.h> | |
29 | #include <linux/delay.h> | |
30 | #include <linux/export.h> | |
31 | #include <linux/init.h> | |
32 | #include <linux/list.h> | |
33 | #include <linux/of.h> | |
34 | #include <linux/pci.h> | |
35 | #include <linux/proc_fs.h> | |
36 | #include <linux/rbtree.h> | |
37 | #include <linux/sched.h> | |
38 | #include <linux/seq_file.h> | |
39 | #include <linux/spinlock.h> | |
40 | ||
41 | #include <asm/eeh.h> | |
42 | #include <asm/eeh_event.h> | |
43 | #include <asm/io.h> | |
44 | #include <asm/machdep.h> | |
45 | #include <asm/ppc-pci.h> | |
46 | #include <asm/rtas.h> | |
47 | ||
e2af155c GS |
48 | /* RTAS tokens */ |
49 | static int ibm_set_eeh_option; | |
50 | static int ibm_set_slot_reset; | |
51 | static int ibm_read_slot_reset_state; | |
52 | static int ibm_read_slot_reset_state2; | |
53 | static int ibm_slot_error_detail; | |
54 | static int ibm_get_config_addr_info; | |
55 | static int ibm_get_config_addr_info2; | |
56 | static int ibm_configure_bridge; | |
57 | static int ibm_configure_pe; | |
58 | ||
8d633291 GS |
59 | /* |
60 | * Buffer for reporting slot-error-detail rtas calls. Its here | |
61 | * in BSS, and not dynamically alloced, so that it ends up in | |
62 | * RMO where RTAS can access it. | |
63 | */ | |
64 | static unsigned char slot_errbuf[RTAS_ERROR_LOG_MAX]; | |
65 | static DEFINE_SPINLOCK(slot_errbuf_lock); | |
66 | static int eeh_error_buf_size; | |
67 | ||
aa1e6374 GS |
68 | /** |
69 | * pseries_eeh_init - EEH platform dependent initialization | |
70 | * | |
71 | * EEH platform dependent initialization on pseries. | |
72 | */ | |
73 | static int pseries_eeh_init(void) | |
74 | { | |
e2af155c GS |
75 | /* figure out EEH RTAS function call tokens */ |
76 | ibm_set_eeh_option = rtas_token("ibm,set-eeh-option"); | |
77 | ibm_set_slot_reset = rtas_token("ibm,set-slot-reset"); | |
78 | ibm_read_slot_reset_state2 = rtas_token("ibm,read-slot-reset-state2"); | |
79 | ibm_read_slot_reset_state = rtas_token("ibm,read-slot-reset-state"); | |
80 | ibm_slot_error_detail = rtas_token("ibm,slot-error-detail"); | |
81 | ibm_get_config_addr_info2 = rtas_token("ibm,get-config-addr-info2"); | |
82 | ibm_get_config_addr_info = rtas_token("ibm,get-config-addr-info"); | |
83 | ibm_configure_pe = rtas_token("ibm,configure-pe"); | |
9c41ef08 | 84 | ibm_configure_bridge = rtas_token("ibm,configure-bridge"); |
e2af155c GS |
85 | |
86 | /* necessary sanity check */ | |
87 | if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE) { | |
88 | pr_warning("%s: RTAS service <ibm,set-eeh-option> invalid\n", | |
89 | __func__); | |
90 | return -EINVAL; | |
91 | } else if (ibm_set_slot_reset == RTAS_UNKNOWN_SERVICE) { | |
9c41ef08 | 92 | pr_warning("%s: RTAS service <ibm,set-slot-reset> invalid\n", |
e2af155c GS |
93 | __func__); |
94 | return -EINVAL; | |
95 | } else if (ibm_read_slot_reset_state2 == RTAS_UNKNOWN_SERVICE && | |
96 | ibm_read_slot_reset_state == RTAS_UNKNOWN_SERVICE) { | |
97 | pr_warning("%s: RTAS service <ibm,read-slot-reset-state2> and " | |
98 | "<ibm,read-slot-reset-state> invalid\n", | |
99 | __func__); | |
100 | return -EINVAL; | |
101 | } else if (ibm_slot_error_detail == RTAS_UNKNOWN_SERVICE) { | |
102 | pr_warning("%s: RTAS service <ibm,slot-error-detail> invalid\n", | |
103 | __func__); | |
104 | return -EINVAL; | |
105 | } else if (ibm_get_config_addr_info2 == RTAS_UNKNOWN_SERVICE && | |
106 | ibm_get_config_addr_info == RTAS_UNKNOWN_SERVICE) { | |
107 | pr_warning("%s: RTAS service <ibm,get-config-addr-info2> and " | |
108 | "<ibm,get-config-addr-info> invalid\n", | |
109 | __func__); | |
110 | return -EINVAL; | |
111 | } else if (ibm_configure_pe == RTAS_UNKNOWN_SERVICE && | |
112 | ibm_configure_bridge == RTAS_UNKNOWN_SERVICE) { | |
113 | pr_warning("%s: RTAS service <ibm,configure-pe> and " | |
114 | "<ibm,configure-bridge> invalid\n", | |
115 | __func__); | |
116 | return -EINVAL; | |
117 | } | |
118 | ||
8d633291 GS |
119 | /* Initialize error log lock and size */ |
120 | spin_lock_init(&slot_errbuf_lock); | |
121 | eeh_error_buf_size = rtas_token("rtas-error-log-max"); | |
122 | if (eeh_error_buf_size == RTAS_UNKNOWN_SERVICE) { | |
123 | pr_warning("%s: unknown EEH error log size\n", | |
124 | __func__); | |
125 | eeh_error_buf_size = 1024; | |
126 | } else if (eeh_error_buf_size > RTAS_ERROR_LOG_MAX) { | |
127 | pr_warning("%s: EEH error log size %d exceeds the maximal %d\n", | |
128 | __func__, eeh_error_buf_size, RTAS_ERROR_LOG_MAX); | |
129 | eeh_error_buf_size = RTAS_ERROR_LOG_MAX; | |
130 | } | |
131 | ||
aa1e6374 GS |
132 | return 0; |
133 | } | |
134 | ||
135 | /** | |
136 | * pseries_eeh_set_option - Initialize EEH or MMIO/DMA reenable | |
137 | * @dn: device node | |
138 | * @option: operation to be issued | |
139 | * | |
140 | * The function is used to control the EEH functionality globally. | |
141 | * Currently, following options are support according to PAPR: | |
142 | * Enable EEH, Disable EEH, Enable MMIO and Enable DMA | |
143 | */ | |
144 | static int pseries_eeh_set_option(struct device_node *dn, int option) | |
145 | { | |
8fb8f709 | 146 | int ret = 0; |
54793d0e | 147 | struct eeh_dev *edev; |
8fb8f709 GS |
148 | const u32 *reg; |
149 | int config_addr; | |
150 | ||
54793d0e | 151 | edev = of_node_to_eeh_dev(dn); |
8fb8f709 GS |
152 | |
153 | /* | |
154 | * When we're enabling or disabling EEH functioality on | |
155 | * the particular PE, the PE config address is possibly | |
156 | * unavailable. Therefore, we have to figure it out from | |
157 | * the FDT node. | |
158 | */ | |
159 | switch (option) { | |
160 | case EEH_OPT_DISABLE: | |
161 | case EEH_OPT_ENABLE: | |
162 | reg = of_get_property(dn, "reg", NULL); | |
163 | config_addr = reg[0]; | |
164 | break; | |
165 | ||
166 | case EEH_OPT_THAW_MMIO: | |
167 | case EEH_OPT_THAW_DMA: | |
54793d0e GS |
168 | config_addr = edev->config_addr; |
169 | if (edev->pe_config_addr) | |
170 | config_addr = edev->pe_config_addr; | |
8fb8f709 GS |
171 | break; |
172 | ||
173 | default: | |
174 | pr_err("%s: Invalid option %d\n", | |
175 | __func__, option); | |
176 | return -EINVAL; | |
177 | } | |
178 | ||
179 | ret = rtas_call(ibm_set_eeh_option, 4, 1, NULL, | |
54793d0e GS |
180 | config_addr, BUID_HI(edev->phb->buid), |
181 | BUID_LO(edev->phb->buid), option); | |
8fb8f709 GS |
182 | |
183 | return ret; | |
aa1e6374 GS |
184 | } |
185 | ||
186 | /** | |
187 | * pseries_eeh_get_pe_addr - Retrieve PE address | |
188 | * @dn: device node | |
189 | * | |
190 | * Retrieve the assocated PE address. Actually, there're 2 RTAS | |
191 | * function calls dedicated for the purpose. We need implement | |
192 | * it through the new function and then the old one. Besides, | |
193 | * you should make sure the config address is figured out from | |
194 | * FDT node before calling the function. | |
195 | * | |
196 | * It's notable that zero'ed return value means invalid PE config | |
197 | * address. | |
198 | */ | |
199 | static int pseries_eeh_get_pe_addr(struct device_node *dn) | |
200 | { | |
54793d0e | 201 | struct eeh_dev *edev; |
c8c29b38 GS |
202 | int ret = 0; |
203 | int rets[3]; | |
204 | ||
54793d0e | 205 | edev = of_node_to_eeh_dev(dn); |
c8c29b38 GS |
206 | |
207 | if (ibm_get_config_addr_info2 != RTAS_UNKNOWN_SERVICE) { | |
208 | /* | |
209 | * First of all, we need to make sure there has one PE | |
210 | * associated with the device. Otherwise, PE address is | |
211 | * meaningless. | |
212 | */ | |
213 | ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets, | |
54793d0e GS |
214 | edev->config_addr, BUID_HI(edev->phb->buid), |
215 | BUID_LO(edev->phb->buid), 1); | |
c8c29b38 GS |
216 | if (ret || (rets[0] == 0)) |
217 | return 0; | |
218 | ||
219 | /* Retrieve the associated PE config address */ | |
220 | ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets, | |
54793d0e GS |
221 | edev->config_addr, BUID_HI(edev->phb->buid), |
222 | BUID_LO(edev->phb->buid), 0); | |
c8c29b38 GS |
223 | if (ret) { |
224 | pr_warning("%s: Failed to get PE address for %s\n", | |
225 | __func__, dn->full_name); | |
226 | return 0; | |
227 | } | |
228 | ||
229 | return rets[0]; | |
230 | } | |
231 | ||
232 | if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) { | |
233 | ret = rtas_call(ibm_get_config_addr_info, 4, 2, rets, | |
54793d0e GS |
234 | edev->config_addr, BUID_HI(edev->phb->buid), |
235 | BUID_LO(edev->phb->buid), 0); | |
c8c29b38 GS |
236 | if (ret) { |
237 | pr_warning("%s: Failed to get PE address for %s\n", | |
238 | __func__, dn->full_name); | |
239 | return 0; | |
240 | } | |
241 | ||
242 | return rets[0]; | |
243 | } | |
244 | ||
245 | return ret; | |
aa1e6374 GS |
246 | } |
247 | ||
248 | /** | |
249 | * pseries_eeh_get_state - Retrieve PE state | |
250 | * @dn: PE associated device node | |
251 | * @state: return value | |
252 | * | |
253 | * Retrieve the state of the specified PE. On RTAS compliant | |
254 | * pseries platform, there already has one dedicated RTAS function | |
255 | * for the purpose. It's notable that the associated PE config address | |
256 | * might be ready when calling the function. Therefore, endeavour to | |
257 | * use the PE config address if possible. Further more, there're 2 | |
258 | * RTAS calls for the purpose, we need to try the new one and back | |
259 | * to the old one if the new one couldn't work properly. | |
260 | */ | |
261 | static int pseries_eeh_get_state(struct device_node *dn, int *state) | |
262 | { | |
54793d0e | 263 | struct eeh_dev *edev; |
eb594a47 GS |
264 | int config_addr; |
265 | int ret; | |
266 | int rets[4]; | |
267 | int result; | |
268 | ||
269 | /* Figure out PE config address if possible */ | |
54793d0e GS |
270 | edev = of_node_to_eeh_dev(dn); |
271 | config_addr = edev->config_addr; | |
272 | if (edev->pe_config_addr) | |
273 | config_addr = edev->pe_config_addr; | |
eb594a47 GS |
274 | |
275 | if (ibm_read_slot_reset_state2 != RTAS_UNKNOWN_SERVICE) { | |
276 | ret = rtas_call(ibm_read_slot_reset_state2, 3, 4, rets, | |
54793d0e GS |
277 | config_addr, BUID_HI(edev->phb->buid), |
278 | BUID_LO(edev->phb->buid)); | |
eb594a47 GS |
279 | } else if (ibm_read_slot_reset_state != RTAS_UNKNOWN_SERVICE) { |
280 | /* Fake PE unavailable info */ | |
281 | rets[2] = 0; | |
282 | ret = rtas_call(ibm_read_slot_reset_state, 3, 3, rets, | |
54793d0e GS |
283 | config_addr, BUID_HI(edev->phb->buid), |
284 | BUID_LO(edev->phb->buid)); | |
eb594a47 GS |
285 | } else { |
286 | return EEH_STATE_NOT_SUPPORT; | |
287 | } | |
288 | ||
289 | if (ret) | |
290 | return ret; | |
291 | ||
292 | /* Parse the result out */ | |
293 | result = 0; | |
294 | if (rets[1]) { | |
295 | switch(rets[0]) { | |
296 | case 0: | |
297 | result &= ~EEH_STATE_RESET_ACTIVE; | |
298 | result |= EEH_STATE_MMIO_ACTIVE; | |
299 | result |= EEH_STATE_DMA_ACTIVE; | |
300 | break; | |
301 | case 1: | |
302 | result |= EEH_STATE_RESET_ACTIVE; | |
303 | result |= EEH_STATE_MMIO_ACTIVE; | |
304 | result |= EEH_STATE_DMA_ACTIVE; | |
305 | break; | |
306 | case 2: | |
307 | result &= ~EEH_STATE_RESET_ACTIVE; | |
308 | result &= ~EEH_STATE_MMIO_ACTIVE; | |
309 | result &= ~EEH_STATE_DMA_ACTIVE; | |
310 | break; | |
311 | case 4: | |
312 | result &= ~EEH_STATE_RESET_ACTIVE; | |
313 | result &= ~EEH_STATE_MMIO_ACTIVE; | |
314 | result &= ~EEH_STATE_DMA_ACTIVE; | |
315 | result |= EEH_STATE_MMIO_ENABLED; | |
316 | break; | |
317 | case 5: | |
318 | if (rets[2]) { | |
319 | if (state) *state = rets[2]; | |
320 | result = EEH_STATE_UNAVAILABLE; | |
321 | } else { | |
322 | result = EEH_STATE_NOT_SUPPORT; | |
323 | } | |
324 | default: | |
325 | result = EEH_STATE_NOT_SUPPORT; | |
326 | } | |
327 | } else { | |
328 | result = EEH_STATE_NOT_SUPPORT; | |
329 | } | |
330 | ||
331 | return result; | |
aa1e6374 GS |
332 | } |
333 | ||
334 | /** | |
335 | * pseries_eeh_reset - Reset the specified PE | |
336 | * @dn: PE associated device node | |
337 | * @option: reset option | |
338 | * | |
339 | * Reset the specified PE | |
340 | */ | |
341 | static int pseries_eeh_reset(struct device_node *dn, int option) | |
342 | { | |
54793d0e | 343 | struct eeh_dev *edev; |
2652481f GS |
344 | int config_addr; |
345 | int ret; | |
346 | ||
347 | /* Figure out PE address */ | |
54793d0e GS |
348 | edev = of_node_to_eeh_dev(dn); |
349 | config_addr = edev->config_addr; | |
350 | if (edev->pe_config_addr) | |
351 | config_addr = edev->pe_config_addr; | |
2652481f GS |
352 | |
353 | /* Reset PE through RTAS call */ | |
354 | ret = rtas_call(ibm_set_slot_reset, 4, 1, NULL, | |
54793d0e GS |
355 | config_addr, BUID_HI(edev->phb->buid), |
356 | BUID_LO(edev->phb->buid), option); | |
2652481f GS |
357 | |
358 | /* If fundamental-reset not supported, try hot-reset */ | |
359 | if (option == EEH_RESET_FUNDAMENTAL && | |
360 | ret == -8) { | |
361 | ret = rtas_call(ibm_set_slot_reset, 4, 1, NULL, | |
54793d0e GS |
362 | config_addr, BUID_HI(edev->phb->buid), |
363 | BUID_LO(edev->phb->buid), EEH_RESET_HOT); | |
2652481f GS |
364 | } |
365 | ||
366 | return ret; | |
aa1e6374 GS |
367 | } |
368 | ||
369 | /** | |
370 | * pseries_eeh_wait_state - Wait for PE state | |
371 | * @dn: PE associated device node | |
372 | * @max_wait: maximal period in microsecond | |
373 | * | |
374 | * Wait for the state of associated PE. It might take some time | |
375 | * to retrieve the PE's state. | |
376 | */ | |
377 | static int pseries_eeh_wait_state(struct device_node *dn, int max_wait) | |
378 | { | |
b0e5f742 GS |
379 | int ret; |
380 | int mwait; | |
381 | ||
382 | /* | |
383 | * According to PAPR, the state of PE might be temporarily | |
384 | * unavailable. Under the circumstance, we have to wait | |
385 | * for indicated time determined by firmware. The maximal | |
386 | * wait time is 5 minutes, which is acquired from the original | |
387 | * EEH implementation. Also, the original implementation | |
388 | * also defined the minimal wait time as 1 second. | |
389 | */ | |
390 | #define EEH_STATE_MIN_WAIT_TIME (1000) | |
391 | #define EEH_STATE_MAX_WAIT_TIME (300 * 1000) | |
392 | ||
393 | while (1) { | |
394 | ret = pseries_eeh_get_state(dn, &mwait); | |
395 | ||
396 | /* | |
397 | * If the PE's state is temporarily unavailable, | |
398 | * we have to wait for the specified time. Otherwise, | |
399 | * the PE's state will be returned immediately. | |
400 | */ | |
401 | if (ret != EEH_STATE_UNAVAILABLE) | |
402 | return ret; | |
403 | ||
404 | if (max_wait <= 0) { | |
405 | pr_warning("%s: Timeout when getting PE's state (%d)\n", | |
406 | __func__, max_wait); | |
407 | return EEH_STATE_NOT_SUPPORT; | |
408 | } | |
409 | ||
410 | if (mwait <= 0) { | |
411 | pr_warning("%s: Firmware returned bad wait value %d\n", | |
412 | __func__, mwait); | |
413 | mwait = EEH_STATE_MIN_WAIT_TIME; | |
414 | } else if (mwait > EEH_STATE_MAX_WAIT_TIME) { | |
415 | pr_warning("%s: Firmware returned too long wait value %d\n", | |
416 | __func__, mwait); | |
417 | mwait = EEH_STATE_MAX_WAIT_TIME; | |
418 | } | |
419 | ||
420 | max_wait -= mwait; | |
421 | msleep(mwait); | |
422 | } | |
423 | ||
424 | return EEH_STATE_NOT_SUPPORT; | |
aa1e6374 GS |
425 | } |
426 | ||
427 | /** | |
428 | * pseries_eeh_get_log - Retrieve error log | |
429 | * @dn: device node | |
430 | * @severity: temporary or permanent error log | |
431 | * @drv_log: driver log to be combined with retrieved error log | |
432 | * @len: length of driver log | |
433 | * | |
434 | * Retrieve the temporary or permanent error from the PE. | |
435 | * Actually, the error will be retrieved through the dedicated | |
436 | * RTAS call. | |
437 | */ | |
438 | static int pseries_eeh_get_log(struct device_node *dn, int severity, char *drv_log, unsigned long len) | |
439 | { | |
54793d0e | 440 | struct eeh_dev *edev; |
8d633291 GS |
441 | int config_addr; |
442 | unsigned long flags; | |
443 | int ret; | |
444 | ||
54793d0e | 445 | edev = of_node_to_eeh_dev(dn); |
8d633291 GS |
446 | spin_lock_irqsave(&slot_errbuf_lock, flags); |
447 | memset(slot_errbuf, 0, eeh_error_buf_size); | |
448 | ||
449 | /* Figure out the PE address */ | |
54793d0e GS |
450 | config_addr = edev->config_addr; |
451 | if (edev->pe_config_addr) | |
452 | config_addr = edev->pe_config_addr; | |
8d633291 GS |
453 | |
454 | ret = rtas_call(ibm_slot_error_detail, 8, 1, NULL, config_addr, | |
54793d0e | 455 | BUID_HI(edev->phb->buid), BUID_LO(edev->phb->buid), |
8d633291 GS |
456 | virt_to_phys(drv_log), len, |
457 | virt_to_phys(slot_errbuf), eeh_error_buf_size, | |
458 | severity); | |
459 | if (!ret) | |
460 | log_error(slot_errbuf, ERR_TYPE_RTAS_LOG, 0); | |
461 | spin_unlock_irqrestore(&slot_errbuf_lock, flags); | |
462 | ||
463 | return ret; | |
aa1e6374 GS |
464 | } |
465 | ||
466 | /** | |
467 | * pseries_eeh_configure_bridge - Configure PCI bridges in the indicated PE | |
468 | * @dn: PE associated device node | |
469 | * | |
470 | * The function will be called to reconfigure the bridges included | |
471 | * in the specified PE so that the mulfunctional PE would be recovered | |
472 | * again. | |
473 | */ | |
474 | static int pseries_eeh_configure_bridge(struct device_node *dn) | |
475 | { | |
54793d0e | 476 | struct eeh_dev *edev; |
1823fbf1 GS |
477 | int config_addr; |
478 | int ret; | |
479 | ||
480 | /* Figure out the PE address */ | |
54793d0e GS |
481 | edev = of_node_to_eeh_dev(dn); |
482 | config_addr = edev->config_addr; | |
483 | if (edev->pe_config_addr) | |
484 | config_addr = edev->pe_config_addr; | |
1823fbf1 GS |
485 | |
486 | /* Use new configure-pe function, if supported */ | |
487 | if (ibm_configure_pe != RTAS_UNKNOWN_SERVICE) { | |
488 | ret = rtas_call(ibm_configure_pe, 3, 1, NULL, | |
54793d0e GS |
489 | config_addr, BUID_HI(edev->phb->buid), |
490 | BUID_LO(edev->phb->buid)); | |
1823fbf1 GS |
491 | } else if (ibm_configure_bridge != RTAS_UNKNOWN_SERVICE) { |
492 | ret = rtas_call(ibm_configure_bridge, 3, 1, NULL, | |
54793d0e GS |
493 | config_addr, BUID_HI(edev->phb->buid), |
494 | BUID_LO(edev->phb->buid)); | |
1823fbf1 GS |
495 | } else { |
496 | return -EFAULT; | |
497 | } | |
498 | ||
499 | if (ret) | |
500 | pr_warning("%s: Unable to configure bridge %d for %s\n", | |
501 | __func__, ret, dn->full_name); | |
502 | ||
503 | return ret; | |
aa1e6374 GS |
504 | } |
505 | ||
3780444c GS |
506 | /** |
507 | * pseries_eeh_read_config - Read PCI config space | |
508 | * @dn: device node | |
509 | * @where: PCI address | |
510 | * @size: size to read | |
511 | * @val: return value | |
512 | * | |
513 | * Read config space from the speicifed device | |
514 | */ | |
515 | static int pseries_eeh_read_config(struct device_node *dn, int where, int size, u32 *val) | |
516 | { | |
517 | struct pci_dn *pdn; | |
518 | ||
519 | pdn = PCI_DN(dn); | |
520 | ||
521 | return rtas_read_config(pdn, where, size, val); | |
522 | } | |
523 | ||
524 | /** | |
525 | * pseries_eeh_write_config - Write PCI config space | |
526 | * @dn: device node | |
527 | * @where: PCI address | |
528 | * @size: size to write | |
529 | * @val: value to be written | |
530 | * | |
531 | * Write config space to the specified device | |
532 | */ | |
533 | static int pseries_eeh_write_config(struct device_node *dn, int where, int size, u32 val) | |
534 | { | |
535 | struct pci_dn *pdn; | |
536 | ||
537 | pdn = PCI_DN(dn); | |
538 | ||
539 | return rtas_write_config(pdn, where, size, val); | |
540 | } | |
541 | ||
aa1e6374 GS |
542 | static struct eeh_ops pseries_eeh_ops = { |
543 | .name = "pseries", | |
544 | .init = pseries_eeh_init, | |
545 | .set_option = pseries_eeh_set_option, | |
546 | .get_pe_addr = pseries_eeh_get_pe_addr, | |
547 | .get_state = pseries_eeh_get_state, | |
548 | .reset = pseries_eeh_reset, | |
549 | .wait_state = pseries_eeh_wait_state, | |
550 | .get_log = pseries_eeh_get_log, | |
3780444c GS |
551 | .configure_bridge = pseries_eeh_configure_bridge, |
552 | .read_config = pseries_eeh_read_config, | |
553 | .write_config = pseries_eeh_write_config | |
aa1e6374 GS |
554 | }; |
555 | ||
556 | /** | |
557 | * eeh_pseries_init - Register platform dependent EEH operations | |
558 | * | |
559 | * EEH initialization on pseries platform. This function should be | |
560 | * called before any EEH related functions. | |
561 | */ | |
35e5cfe2 | 562 | static int __init eeh_pseries_init(void) |
aa1e6374 | 563 | { |
3ea1ae98 GS |
564 | int ret = -EINVAL; |
565 | ||
566 | if (!machine_is(pseries)) | |
567 | return ret; | |
568 | ||
569 | ret = eeh_ops_register(&pseries_eeh_ops); | |
570 | if (!ret) | |
571 | pr_info("EEH: pSeries platform initialized\n"); | |
572 | else | |
573 | pr_info("EEH: pSeries platform initialization failure (%d)\n", | |
574 | ret); | |
575 | ||
576 | return ret; | |
aa1e6374 | 577 | } |
35e5cfe2 GS |
578 | |
579 | early_initcall(eeh_pseries_init); |