Commit | Line | Data |
---|---|---|
14cf11af PM |
1 | /* |
2 | * arch/ppc64/kernel/head.S | |
3 | * | |
4 | * PowerPC version | |
5 | * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) | |
6 | * | |
7 | * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP | |
8 | * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu> | |
9 | * Adapted for Power Macintosh by Paul Mackerras. | |
10 | * Low-level exception handlers and MMU support | |
11 | * rewritten by Paul Mackerras. | |
12 | * Copyright (C) 1996 Paul Mackerras. | |
13 | * | |
14 | * Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and | |
15 | * Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com | |
16 | * | |
17 | * This file contains the low-level support and setup for the | |
18 | * PowerPC-64 platform, including trap and interrupt dispatch. | |
19 | * | |
20 | * This program is free software; you can redistribute it and/or | |
21 | * modify it under the terms of the GNU General Public License | |
22 | * as published by the Free Software Foundation; either version | |
23 | * 2 of the License, or (at your option) any later version. | |
24 | */ | |
25 | ||
26 | #include <linux/config.h> | |
27 | #include <linux/threads.h> | |
b5bbeb23 | 28 | #include <asm/reg.h> |
14cf11af PM |
29 | #include <asm/page.h> |
30 | #include <asm/mmu.h> | |
31 | #include <asm/systemcfg.h> | |
32 | #include <asm/ppc_asm.h> | |
33 | #include <asm/asm-offsets.h> | |
34 | #include <asm/bug.h> | |
35 | #include <asm/cputable.h> | |
36 | #include <asm/setup.h> | |
37 | #include <asm/hvcall.h> | |
38 | #include <asm/iSeries/LparMap.h> | |
39 | ||
40 | #ifdef CONFIG_PPC_ISERIES | |
41 | #define DO_SOFT_DISABLE | |
42 | #endif | |
43 | ||
44 | /* | |
45 | * We layout physical memory as follows: | |
46 | * 0x0000 - 0x00ff : Secondary processor spin code | |
47 | * 0x0100 - 0x2fff : pSeries Interrupt prologs | |
48 | * 0x3000 - 0x5fff : interrupt support, iSeries and common interrupt prologs | |
49 | * 0x6000 - 0x6fff : Initial (CPU0) segment table | |
50 | * 0x7000 - 0x7fff : FWNMI data area | |
51 | * 0x8000 - : Early init and support code | |
52 | */ | |
53 | ||
54 | /* | |
55 | * SPRG Usage | |
56 | * | |
57 | * Register Definition | |
58 | * | |
59 | * SPRG0 reserved for hypervisor | |
60 | * SPRG1 temp - used to save gpr | |
61 | * SPRG2 temp - used to save gpr | |
62 | * SPRG3 virt addr of paca | |
63 | */ | |
64 | ||
65 | /* | |
66 | * Entering into this code we make the following assumptions: | |
67 | * For pSeries: | |
68 | * 1. The MMU is off & open firmware is running in real mode. | |
69 | * 2. The kernel is entered at __start | |
70 | * | |
71 | * For iSeries: | |
72 | * 1. The MMU is on (as it always is for iSeries) | |
73 | * 2. The kernel is entered at system_reset_iSeries | |
74 | */ | |
75 | ||
76 | .text | |
77 | .globl _stext | |
78 | _stext: | |
79 | #ifdef CONFIG_PPC_MULTIPLATFORM | |
80 | _GLOBAL(__start) | |
81 | /* NOP this out unconditionally */ | |
82 | BEGIN_FTR_SECTION | |
b85a046a | 83 | b .__start_initialization_multiplatform |
14cf11af PM |
84 | END_FTR_SECTION(0, 1) |
85 | #endif /* CONFIG_PPC_MULTIPLATFORM */ | |
86 | ||
87 | /* Catch branch to 0 in real mode */ | |
88 | trap | |
89 | ||
90 | #ifdef CONFIG_PPC_ISERIES | |
91 | /* | |
92 | * At offset 0x20, there is a pointer to iSeries LPAR data. | |
93 | * This is required by the hypervisor | |
94 | */ | |
95 | . = 0x20 | |
96 | .llong hvReleaseData-KERNELBASE | |
97 | ||
98 | /* | |
99 | * At offset 0x28 and 0x30 are offsets to the mschunks_map | |
100 | * array (used by the iSeries LPAR debugger to do translation | |
101 | * between physical addresses and absolute addresses) and | |
102 | * to the pidhash table (also used by the debugger) | |
103 | */ | |
104 | .llong mschunks_map-KERNELBASE | |
105 | .llong 0 /* pidhash-KERNELBASE SFRXXX */ | |
106 | ||
107 | /* Offset 0x38 - Pointer to start of embedded System.map */ | |
108 | .globl embedded_sysmap_start | |
109 | embedded_sysmap_start: | |
110 | .llong 0 | |
111 | /* Offset 0x40 - Pointer to end of embedded System.map */ | |
112 | .globl embedded_sysmap_end | |
113 | embedded_sysmap_end: | |
114 | .llong 0 | |
115 | ||
116 | #endif /* CONFIG_PPC_ISERIES */ | |
117 | ||
118 | /* Secondary processors spin on this value until it goes to 1. */ | |
119 | .globl __secondary_hold_spinloop | |
120 | __secondary_hold_spinloop: | |
121 | .llong 0x0 | |
122 | ||
123 | /* Secondary processors write this value with their cpu # */ | |
124 | /* after they enter the spin loop immediately below. */ | |
125 | .globl __secondary_hold_acknowledge | |
126 | __secondary_hold_acknowledge: | |
127 | .llong 0x0 | |
128 | ||
129 | . = 0x60 | |
130 | /* | |
131 | * The following code is used on pSeries to hold secondary processors | |
132 | * in a spin loop after they have been freed from OpenFirmware, but | |
133 | * before the bulk of the kernel has been relocated. This code | |
134 | * is relocated to physical address 0x60 before prom_init is run. | |
135 | * All of it must fit below the first exception vector at 0x100. | |
136 | */ | |
137 | _GLOBAL(__secondary_hold) | |
138 | mfmsr r24 | |
139 | ori r24,r24,MSR_RI | |
140 | mtmsrd r24 /* RI on */ | |
141 | ||
142 | /* Grab our linux cpu number */ | |
143 | mr r24,r3 | |
144 | ||
145 | /* Tell the master cpu we're here */ | |
146 | /* Relocation is off & we are located at an address less */ | |
147 | /* than 0x100, so only need to grab low order offset. */ | |
148 | std r24,__secondary_hold_acknowledge@l(0) | |
149 | sync | |
150 | ||
151 | /* All secondary cpus wait here until told to start. */ | |
152 | 100: ld r4,__secondary_hold_spinloop@l(0) | |
153 | cmpdi 0,r4,1 | |
154 | bne 100b | |
155 | ||
156 | #ifdef CONFIG_HMT | |
157 | b .hmt_init | |
158 | #else | |
159 | #ifdef CONFIG_SMP | |
160 | mr r3,r24 | |
161 | b .pSeries_secondary_smp_init | |
162 | #else | |
163 | BUG_OPCODE | |
164 | #endif | |
165 | #endif | |
166 | ||
167 | /* This value is used to mark exception frames on the stack. */ | |
168 | .section ".toc","aw" | |
169 | exception_marker: | |
170 | .tc ID_72656773_68657265[TC],0x7265677368657265 | |
171 | .text | |
172 | ||
173 | /* | |
174 | * The following macros define the code that appears as | |
175 | * the prologue to each of the exception handlers. They | |
176 | * are split into two parts to allow a single kernel binary | |
177 | * to be used for pSeries and iSeries. | |
178 | * LOL. One day... - paulus | |
179 | */ | |
180 | ||
181 | /* | |
182 | * We make as much of the exception code common between native | |
183 | * exception handlers (including pSeries LPAR) and iSeries LPAR | |
184 | * implementations as possible. | |
185 | */ | |
186 | ||
187 | /* | |
188 | * This is the start of the interrupt handlers for pSeries | |
189 | * This code runs with relocation off. | |
190 | */ | |
191 | #define EX_R9 0 | |
192 | #define EX_R10 8 | |
193 | #define EX_R11 16 | |
194 | #define EX_R12 24 | |
195 | #define EX_R13 32 | |
196 | #define EX_SRR0 40 | |
197 | #define EX_R3 40 /* SLB miss saves R3, but not SRR0 */ | |
198 | #define EX_DAR 48 | |
199 | #define EX_LR 48 /* SLB miss saves LR, but not DAR */ | |
200 | #define EX_DSISR 56 | |
201 | #define EX_CCR 60 | |
202 | ||
203 | #define EXCEPTION_PROLOG_PSERIES(area, label) \ | |
b5bbeb23 | 204 | mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ |
14cf11af PM |
205 | std r9,area+EX_R9(r13); /* save r9 - r12 */ \ |
206 | std r10,area+EX_R10(r13); \ | |
207 | std r11,area+EX_R11(r13); \ | |
208 | std r12,area+EX_R12(r13); \ | |
b5bbeb23 | 209 | mfspr r9,SPRN_SPRG1; \ |
14cf11af PM |
210 | std r9,area+EX_R13(r13); \ |
211 | mfcr r9; \ | |
212 | clrrdi r12,r13,32; /* get high part of &label */ \ | |
213 | mfmsr r10; \ | |
b5bbeb23 | 214 | mfspr r11,SPRN_SRR0; /* save SRR0 */ \ |
14cf11af PM |
215 | ori r12,r12,(label)@l; /* virt addr of handler */ \ |
216 | ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ | |
b5bbeb23 PM |
217 | mtspr SPRN_SRR0,r12; \ |
218 | mfspr r12,SPRN_SRR1; /* and SRR1 */ \ | |
219 | mtspr SPRN_SRR1,r10; \ | |
14cf11af PM |
220 | rfid; \ |
221 | b . /* prevent speculative execution */ | |
222 | ||
223 | /* | |
224 | * This is the start of the interrupt handlers for iSeries | |
225 | * This code runs with relocation on. | |
226 | */ | |
227 | #define EXCEPTION_PROLOG_ISERIES_1(area) \ | |
b5bbeb23 | 228 | mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ |
14cf11af PM |
229 | std r9,area+EX_R9(r13); /* save r9 - r12 */ \ |
230 | std r10,area+EX_R10(r13); \ | |
231 | std r11,area+EX_R11(r13); \ | |
232 | std r12,area+EX_R12(r13); \ | |
b5bbeb23 | 233 | mfspr r9,SPRN_SPRG1; \ |
14cf11af PM |
234 | std r9,area+EX_R13(r13); \ |
235 | mfcr r9 | |
236 | ||
237 | #define EXCEPTION_PROLOG_ISERIES_2 \ | |
238 | mfmsr r10; \ | |
239 | ld r11,PACALPPACA+LPPACASRR0(r13); \ | |
240 | ld r12,PACALPPACA+LPPACASRR1(r13); \ | |
241 | ori r10,r10,MSR_RI; \ | |
242 | mtmsrd r10,1 | |
243 | ||
244 | /* | |
245 | * The common exception prolog is used for all except a few exceptions | |
246 | * such as a segment miss on a kernel address. We have to be prepared | |
247 | * to take another exception from the point where we first touch the | |
248 | * kernel stack onwards. | |
249 | * | |
250 | * On entry r13 points to the paca, r9-r13 are saved in the paca, | |
251 | * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and | |
252 | * SRR1, and relocation is on. | |
253 | */ | |
254 | #define EXCEPTION_PROLOG_COMMON(n, area) \ | |
255 | andi. r10,r12,MSR_PR; /* See if coming from user */ \ | |
256 | mr r10,r1; /* Save r1 */ \ | |
257 | subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */ \ | |
258 | beq- 1f; \ | |
259 | ld r1,PACAKSAVE(r13); /* kernel stack to use */ \ | |
260 | 1: cmpdi cr1,r1,0; /* check if r1 is in userspace */ \ | |
261 | bge- cr1,bad_stack; /* abort if it is */ \ | |
262 | std r9,_CCR(r1); /* save CR in stackframe */ \ | |
263 | std r11,_NIP(r1); /* save SRR0 in stackframe */ \ | |
264 | std r12,_MSR(r1); /* save SRR1 in stackframe */ \ | |
265 | std r10,0(r1); /* make stack chain pointer */ \ | |
266 | std r0,GPR0(r1); /* save r0 in stackframe */ \ | |
267 | std r10,GPR1(r1); /* save r1 in stackframe */ \ | |
268 | std r2,GPR2(r1); /* save r2 in stackframe */ \ | |
269 | SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \ | |
270 | SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \ | |
271 | ld r9,area+EX_R9(r13); /* move r9, r10 to stackframe */ \ | |
272 | ld r10,area+EX_R10(r13); \ | |
273 | std r9,GPR9(r1); \ | |
274 | std r10,GPR10(r1); \ | |
275 | ld r9,area+EX_R11(r13); /* move r11 - r13 to stackframe */ \ | |
276 | ld r10,area+EX_R12(r13); \ | |
277 | ld r11,area+EX_R13(r13); \ | |
278 | std r9,GPR11(r1); \ | |
279 | std r10,GPR12(r1); \ | |
280 | std r11,GPR13(r1); \ | |
281 | ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \ | |
282 | mflr r9; /* save LR in stackframe */ \ | |
283 | std r9,_LINK(r1); \ | |
284 | mfctr r10; /* save CTR in stackframe */ \ | |
285 | std r10,_CTR(r1); \ | |
b5bbeb23 | 286 | mfspr r11,SPRN_XER; /* save XER in stackframe */ \ |
14cf11af PM |
287 | std r11,_XER(r1); \ |
288 | li r9,(n)+1; \ | |
289 | std r9,_TRAP(r1); /* set trap number */ \ | |
290 | li r10,0; \ | |
291 | ld r11,exception_marker@toc(r2); \ | |
292 | std r10,RESULT(r1); /* clear regs->result */ \ | |
293 | std r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */ | |
294 | ||
295 | /* | |
296 | * Exception vectors. | |
297 | */ | |
298 | #define STD_EXCEPTION_PSERIES(n, label) \ | |
299 | . = n; \ | |
300 | .globl label##_pSeries; \ | |
301 | label##_pSeries: \ | |
302 | HMT_MEDIUM; \ | |
b5bbeb23 | 303 | mtspr SPRN_SPRG1,r13; /* save r13 */ \ |
14cf11af PM |
304 | RUNLATCH_ON(r13); \ |
305 | EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) | |
306 | ||
307 | #define STD_EXCEPTION_ISERIES(n, label, area) \ | |
308 | .globl label##_iSeries; \ | |
309 | label##_iSeries: \ | |
310 | HMT_MEDIUM; \ | |
b5bbeb23 | 311 | mtspr SPRN_SPRG1,r13; /* save r13 */ \ |
14cf11af PM |
312 | RUNLATCH_ON(r13); \ |
313 | EXCEPTION_PROLOG_ISERIES_1(area); \ | |
314 | EXCEPTION_PROLOG_ISERIES_2; \ | |
315 | b label##_common | |
316 | ||
317 | #define MASKABLE_EXCEPTION_ISERIES(n, label) \ | |
318 | .globl label##_iSeries; \ | |
319 | label##_iSeries: \ | |
320 | HMT_MEDIUM; \ | |
b5bbeb23 | 321 | mtspr SPRN_SPRG1,r13; /* save r13 */ \ |
14cf11af PM |
322 | RUNLATCH_ON(r13); \ |
323 | EXCEPTION_PROLOG_ISERIES_1(PACA_EXGEN); \ | |
324 | lbz r10,PACAPROCENABLED(r13); \ | |
325 | cmpwi 0,r10,0; \ | |
326 | beq- label##_iSeries_masked; \ | |
327 | EXCEPTION_PROLOG_ISERIES_2; \ | |
328 | b label##_common; \ | |
329 | ||
330 | #ifdef DO_SOFT_DISABLE | |
331 | #define DISABLE_INTS \ | |
332 | lbz r10,PACAPROCENABLED(r13); \ | |
333 | li r11,0; \ | |
334 | std r10,SOFTE(r1); \ | |
335 | mfmsr r10; \ | |
336 | stb r11,PACAPROCENABLED(r13); \ | |
337 | ori r10,r10,MSR_EE; \ | |
338 | mtmsrd r10,1 | |
339 | ||
340 | #define ENABLE_INTS \ | |
341 | lbz r10,PACAPROCENABLED(r13); \ | |
342 | mfmsr r11; \ | |
343 | std r10,SOFTE(r1); \ | |
344 | ori r11,r11,MSR_EE; \ | |
345 | mtmsrd r11,1 | |
346 | ||
347 | #else /* hard enable/disable interrupts */ | |
348 | #define DISABLE_INTS | |
349 | ||
350 | #define ENABLE_INTS \ | |
351 | ld r12,_MSR(r1); \ | |
352 | mfmsr r11; \ | |
353 | rlwimi r11,r12,0,MSR_EE; \ | |
354 | mtmsrd r11,1 | |
355 | ||
356 | #endif | |
357 | ||
358 | #define STD_EXCEPTION_COMMON(trap, label, hdlr) \ | |
359 | .align 7; \ | |
360 | .globl label##_common; \ | |
361 | label##_common: \ | |
362 | EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ | |
363 | DISABLE_INTS; \ | |
364 | bl .save_nvgprs; \ | |
365 | addi r3,r1,STACK_FRAME_OVERHEAD; \ | |
366 | bl hdlr; \ | |
367 | b .ret_from_except | |
368 | ||
369 | #define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr) \ | |
370 | .align 7; \ | |
371 | .globl label##_common; \ | |
372 | label##_common: \ | |
373 | EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ | |
374 | DISABLE_INTS; \ | |
375 | addi r3,r1,STACK_FRAME_OVERHEAD; \ | |
376 | bl hdlr; \ | |
377 | b .ret_from_except_lite | |
378 | ||
379 | /* | |
380 | * Start of pSeries system interrupt routines | |
381 | */ | |
382 | . = 0x100 | |
383 | .globl __start_interrupts | |
384 | __start_interrupts: | |
385 | ||
386 | STD_EXCEPTION_PSERIES(0x100, system_reset) | |
387 | ||
388 | . = 0x200 | |
389 | _machine_check_pSeries: | |
390 | HMT_MEDIUM | |
b5bbeb23 | 391 | mtspr SPRN_SPRG1,r13 /* save r13 */ |
14cf11af PM |
392 | RUNLATCH_ON(r13) |
393 | EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) | |
394 | ||
395 | . = 0x300 | |
396 | .globl data_access_pSeries | |
397 | data_access_pSeries: | |
398 | HMT_MEDIUM | |
b5bbeb23 | 399 | mtspr SPRN_SPRG1,r13 |
14cf11af | 400 | BEGIN_FTR_SECTION |
b5bbeb23 PM |
401 | mtspr SPRN_SPRG2,r12 |
402 | mfspr r13,SPRN_DAR | |
403 | mfspr r12,SPRN_DSISR | |
14cf11af PM |
404 | srdi r13,r13,60 |
405 | rlwimi r13,r12,16,0x20 | |
406 | mfcr r12 | |
407 | cmpwi r13,0x2c | |
408 | beq .do_stab_bolted_pSeries | |
409 | mtcrf 0x80,r12 | |
b5bbeb23 | 410 | mfspr r12,SPRN_SPRG2 |
14cf11af PM |
411 | END_FTR_SECTION_IFCLR(CPU_FTR_SLB) |
412 | EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common) | |
413 | ||
414 | . = 0x380 | |
415 | .globl data_access_slb_pSeries | |
416 | data_access_slb_pSeries: | |
417 | HMT_MEDIUM | |
b5bbeb23 | 418 | mtspr SPRN_SPRG1,r13 |
14cf11af | 419 | RUNLATCH_ON(r13) |
b5bbeb23 | 420 | mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ |
14cf11af PM |
421 | std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */ |
422 | std r10,PACA_EXSLB+EX_R10(r13) | |
423 | std r11,PACA_EXSLB+EX_R11(r13) | |
424 | std r12,PACA_EXSLB+EX_R12(r13) | |
425 | std r3,PACA_EXSLB+EX_R3(r13) | |
b5bbeb23 | 426 | mfspr r9,SPRN_SPRG1 |
14cf11af PM |
427 | std r9,PACA_EXSLB+EX_R13(r13) |
428 | mfcr r9 | |
b5bbeb23 PM |
429 | mfspr r12,SPRN_SRR1 /* and SRR1 */ |
430 | mfspr r3,SPRN_DAR | |
14cf11af PM |
431 | b .do_slb_miss /* Rel. branch works in real mode */ |
432 | ||
433 | STD_EXCEPTION_PSERIES(0x400, instruction_access) | |
434 | ||
435 | . = 0x480 | |
436 | .globl instruction_access_slb_pSeries | |
437 | instruction_access_slb_pSeries: | |
438 | HMT_MEDIUM | |
b5bbeb23 | 439 | mtspr SPRN_SPRG1,r13 |
14cf11af | 440 | RUNLATCH_ON(r13) |
b5bbeb23 | 441 | mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ |
14cf11af PM |
442 | std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */ |
443 | std r10,PACA_EXSLB+EX_R10(r13) | |
444 | std r11,PACA_EXSLB+EX_R11(r13) | |
445 | std r12,PACA_EXSLB+EX_R12(r13) | |
446 | std r3,PACA_EXSLB+EX_R3(r13) | |
b5bbeb23 | 447 | mfspr r9,SPRN_SPRG1 |
14cf11af PM |
448 | std r9,PACA_EXSLB+EX_R13(r13) |
449 | mfcr r9 | |
b5bbeb23 PM |
450 | mfspr r12,SPRN_SRR1 /* and SRR1 */ |
451 | mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */ | |
14cf11af PM |
452 | b .do_slb_miss /* Rel. branch works in real mode */ |
453 | ||
454 | STD_EXCEPTION_PSERIES(0x500, hardware_interrupt) | |
455 | STD_EXCEPTION_PSERIES(0x600, alignment) | |
456 | STD_EXCEPTION_PSERIES(0x700, program_check) | |
457 | STD_EXCEPTION_PSERIES(0x800, fp_unavailable) | |
458 | STD_EXCEPTION_PSERIES(0x900, decrementer) | |
459 | STD_EXCEPTION_PSERIES(0xa00, trap_0a) | |
460 | STD_EXCEPTION_PSERIES(0xb00, trap_0b) | |
461 | ||
462 | . = 0xc00 | |
463 | .globl system_call_pSeries | |
464 | system_call_pSeries: | |
465 | HMT_MEDIUM | |
466 | RUNLATCH_ON(r9) | |
467 | mr r9,r13 | |
468 | mfmsr r10 | |
b5bbeb23 PM |
469 | mfspr r13,SPRN_SPRG3 |
470 | mfspr r11,SPRN_SRR0 | |
14cf11af PM |
471 | clrrdi r12,r13,32 |
472 | oris r12,r12,system_call_common@h | |
473 | ori r12,r12,system_call_common@l | |
b5bbeb23 | 474 | mtspr SPRN_SRR0,r12 |
14cf11af | 475 | ori r10,r10,MSR_IR|MSR_DR|MSR_RI |
b5bbeb23 PM |
476 | mfspr r12,SPRN_SRR1 |
477 | mtspr SPRN_SRR1,r10 | |
14cf11af PM |
478 | rfid |
479 | b . /* prevent speculative execution */ | |
480 | ||
481 | STD_EXCEPTION_PSERIES(0xd00, single_step) | |
482 | STD_EXCEPTION_PSERIES(0xe00, trap_0e) | |
483 | ||
484 | /* We need to deal with the Altivec unavailable exception | |
485 | * here which is at 0xf20, thus in the middle of the | |
486 | * prolog code of the PerformanceMonitor one. A little | |
487 | * trickery is thus necessary | |
488 | */ | |
489 | . = 0xf00 | |
490 | b performance_monitor_pSeries | |
491 | ||
492 | STD_EXCEPTION_PSERIES(0xf20, altivec_unavailable) | |
493 | ||
494 | STD_EXCEPTION_PSERIES(0x1300, instruction_breakpoint) | |
495 | STD_EXCEPTION_PSERIES(0x1700, altivec_assist) | |
496 | ||
497 | . = 0x3000 | |
498 | ||
499 | /*** pSeries interrupt support ***/ | |
500 | ||
501 | /* moved from 0xf00 */ | |
502 | STD_EXCEPTION_PSERIES(., performance_monitor) | |
503 | ||
504 | .align 7 | |
505 | _GLOBAL(do_stab_bolted_pSeries) | |
506 | mtcrf 0x80,r12 | |
b5bbeb23 | 507 | mfspr r12,SPRN_SPRG2 |
14cf11af PM |
508 | EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted) |
509 | ||
510 | /* | |
511 | * Vectors for the FWNMI option. Share common code. | |
512 | */ | |
b5bbeb23 | 513 | .globl system_reset_fwnmi |
14cf11af | 514 | system_reset_fwnmi: |
b5bbeb23 PM |
515 | HMT_MEDIUM |
516 | mtspr SPRN_SPRG1,r13 /* save r13 */ | |
517 | RUNLATCH_ON(r13) | |
518 | EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common) | |
14cf11af | 519 | |
b5bbeb23 | 520 | .globl machine_check_fwnmi |
14cf11af | 521 | machine_check_fwnmi: |
b5bbeb23 PM |
522 | HMT_MEDIUM |
523 | mtspr SPRN_SPRG1,r13 /* save r13 */ | |
524 | RUNLATCH_ON(r13) | |
525 | EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) | |
14cf11af PM |
526 | |
527 | #ifdef CONFIG_PPC_ISERIES | |
528 | /*** ISeries-LPAR interrupt handlers ***/ | |
529 | ||
530 | STD_EXCEPTION_ISERIES(0x200, machine_check, PACA_EXMC) | |
531 | ||
532 | .globl data_access_iSeries | |
533 | data_access_iSeries: | |
b5bbeb23 | 534 | mtspr SPRN_SPRG1,r13 |
14cf11af | 535 | BEGIN_FTR_SECTION |
b5bbeb23 PM |
536 | mtspr SPRN_SPRG2,r12 |
537 | mfspr r13,SPRN_DAR | |
538 | mfspr r12,SPRN_DSISR | |
14cf11af PM |
539 | srdi r13,r13,60 |
540 | rlwimi r13,r12,16,0x20 | |
541 | mfcr r12 | |
542 | cmpwi r13,0x2c | |
543 | beq .do_stab_bolted_iSeries | |
544 | mtcrf 0x80,r12 | |
b5bbeb23 | 545 | mfspr r12,SPRN_SPRG2 |
14cf11af PM |
546 | END_FTR_SECTION_IFCLR(CPU_FTR_SLB) |
547 | EXCEPTION_PROLOG_ISERIES_1(PACA_EXGEN) | |
548 | EXCEPTION_PROLOG_ISERIES_2 | |
549 | b data_access_common | |
550 | ||
551 | .do_stab_bolted_iSeries: | |
552 | mtcrf 0x80,r12 | |
b5bbeb23 | 553 | mfspr r12,SPRN_SPRG2 |
14cf11af PM |
554 | EXCEPTION_PROLOG_ISERIES_1(PACA_EXSLB) |
555 | EXCEPTION_PROLOG_ISERIES_2 | |
556 | b .do_stab_bolted | |
557 | ||
558 | .globl data_access_slb_iSeries | |
559 | data_access_slb_iSeries: | |
b5bbeb23 | 560 | mtspr SPRN_SPRG1,r13 /* save r13 */ |
14cf11af PM |
561 | EXCEPTION_PROLOG_ISERIES_1(PACA_EXSLB) |
562 | std r3,PACA_EXSLB+EX_R3(r13) | |
563 | ld r12,PACALPPACA+LPPACASRR1(r13) | |
b5bbeb23 | 564 | mfspr r3,SPRN_DAR |
14cf11af PM |
565 | b .do_slb_miss |
566 | ||
567 | STD_EXCEPTION_ISERIES(0x400, instruction_access, PACA_EXGEN) | |
568 | ||
569 | .globl instruction_access_slb_iSeries | |
570 | instruction_access_slb_iSeries: | |
b5bbeb23 | 571 | mtspr SPRN_SPRG1,r13 /* save r13 */ |
14cf11af PM |
572 | EXCEPTION_PROLOG_ISERIES_1(PACA_EXSLB) |
573 | std r3,PACA_EXSLB+EX_R3(r13) | |
574 | ld r12,PACALPPACA+LPPACASRR1(r13) | |
575 | ld r3,PACALPPACA+LPPACASRR0(r13) | |
576 | b .do_slb_miss | |
577 | ||
578 | MASKABLE_EXCEPTION_ISERIES(0x500, hardware_interrupt) | |
579 | STD_EXCEPTION_ISERIES(0x600, alignment, PACA_EXGEN) | |
580 | STD_EXCEPTION_ISERIES(0x700, program_check, PACA_EXGEN) | |
581 | STD_EXCEPTION_ISERIES(0x800, fp_unavailable, PACA_EXGEN) | |
582 | MASKABLE_EXCEPTION_ISERIES(0x900, decrementer) | |
583 | STD_EXCEPTION_ISERIES(0xa00, trap_0a, PACA_EXGEN) | |
584 | STD_EXCEPTION_ISERIES(0xb00, trap_0b, PACA_EXGEN) | |
585 | ||
586 | .globl system_call_iSeries | |
587 | system_call_iSeries: | |
588 | mr r9,r13 | |
b5bbeb23 | 589 | mfspr r13,SPRN_SPRG3 |
14cf11af PM |
590 | EXCEPTION_PROLOG_ISERIES_2 |
591 | b system_call_common | |
592 | ||
593 | STD_EXCEPTION_ISERIES( 0xd00, single_step, PACA_EXGEN) | |
594 | STD_EXCEPTION_ISERIES( 0xe00, trap_0e, PACA_EXGEN) | |
595 | STD_EXCEPTION_ISERIES( 0xf00, performance_monitor, PACA_EXGEN) | |
596 | ||
597 | .globl system_reset_iSeries | |
598 | system_reset_iSeries: | |
b5bbeb23 | 599 | mfspr r13,SPRN_SPRG3 /* Get paca address */ |
14cf11af PM |
600 | mfmsr r24 |
601 | ori r24,r24,MSR_RI | |
602 | mtmsrd r24 /* RI on */ | |
603 | lhz r24,PACAPACAINDEX(r13) /* Get processor # */ | |
604 | cmpwi 0,r24,0 /* Are we processor 0? */ | |
605 | beq .__start_initialization_iSeries /* Start up the first processor */ | |
606 | mfspr r4,SPRN_CTRLF | |
607 | li r5,CTRL_RUNLATCH /* Turn off the run light */ | |
608 | andc r4,r4,r5 | |
609 | mtspr SPRN_CTRLT,r4 | |
610 | ||
611 | 1: | |
612 | HMT_LOW | |
613 | #ifdef CONFIG_SMP | |
614 | lbz r23,PACAPROCSTART(r13) /* Test if this processor | |
615 | * should start */ | |
616 | sync | |
617 | LOADADDR(r3,current_set) | |
618 | sldi r28,r24,3 /* get current_set[cpu#] */ | |
619 | ldx r3,r3,r28 | |
620 | addi r1,r3,THREAD_SIZE | |
621 | subi r1,r1,STACK_FRAME_OVERHEAD | |
622 | ||
623 | cmpwi 0,r23,0 | |
624 | beq iSeries_secondary_smp_loop /* Loop until told to go */ | |
625 | bne .__secondary_start /* Loop until told to go */ | |
626 | iSeries_secondary_smp_loop: | |
627 | /* Let the Hypervisor know we are alive */ | |
628 | /* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */ | |
629 | lis r3,0x8002 | |
630 | rldicr r3,r3,32,15 /* r0 = (r3 << 32) & 0xffff000000000000 */ | |
631 | #else /* CONFIG_SMP */ | |
632 | /* Yield the processor. This is required for non-SMP kernels | |
633 | which are running on multi-threaded machines. */ | |
634 | lis r3,0x8000 | |
635 | rldicr r3,r3,32,15 /* r3 = (r3 << 32) & 0xffff000000000000 */ | |
636 | addi r3,r3,18 /* r3 = 0x8000000000000012 which is "yield" */ | |
637 | li r4,0 /* "yield timed" */ | |
638 | li r5,-1 /* "yield forever" */ | |
639 | #endif /* CONFIG_SMP */ | |
640 | li r0,-1 /* r0=-1 indicates a Hypervisor call */ | |
641 | sc /* Invoke the hypervisor via a system call */ | |
b5bbeb23 | 642 | mfspr r13,SPRN_SPRG3 /* Put r13 back ???? */ |
14cf11af PM |
643 | b 1b /* If SMP not configured, secondaries |
644 | * loop forever */ | |
645 | ||
646 | .globl decrementer_iSeries_masked | |
647 | decrementer_iSeries_masked: | |
648 | li r11,1 | |
649 | stb r11,PACALPPACA+LPPACADECRINT(r13) | |
650 | lwz r12,PACADEFAULTDECR(r13) | |
651 | mtspr SPRN_DEC,r12 | |
652 | /* fall through */ | |
653 | ||
654 | .globl hardware_interrupt_iSeries_masked | |
655 | hardware_interrupt_iSeries_masked: | |
656 | mtcrf 0x80,r9 /* Restore regs */ | |
657 | ld r11,PACALPPACA+LPPACASRR0(r13) | |
658 | ld r12,PACALPPACA+LPPACASRR1(r13) | |
b5bbeb23 PM |
659 | mtspr SPRN_SRR0,r11 |
660 | mtspr SPRN_SRR1,r12 | |
14cf11af PM |
661 | ld r9,PACA_EXGEN+EX_R9(r13) |
662 | ld r10,PACA_EXGEN+EX_R10(r13) | |
663 | ld r11,PACA_EXGEN+EX_R11(r13) | |
664 | ld r12,PACA_EXGEN+EX_R12(r13) | |
665 | ld r13,PACA_EXGEN+EX_R13(r13) | |
666 | rfid | |
667 | b . /* prevent speculative execution */ | |
668 | #endif /* CONFIG_PPC_ISERIES */ | |
669 | ||
670 | /*** Common interrupt handlers ***/ | |
671 | ||
672 | STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception) | |
673 | ||
674 | /* | |
675 | * Machine check is different because we use a different | |
676 | * save area: PACA_EXMC instead of PACA_EXGEN. | |
677 | */ | |
678 | .align 7 | |
679 | .globl machine_check_common | |
680 | machine_check_common: | |
681 | EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC) | |
682 | DISABLE_INTS | |
683 | bl .save_nvgprs | |
684 | addi r3,r1,STACK_FRAME_OVERHEAD | |
685 | bl .machine_check_exception | |
686 | b .ret_from_except | |
687 | ||
688 | STD_EXCEPTION_COMMON_LITE(0x900, decrementer, .timer_interrupt) | |
689 | STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception) | |
690 | STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception) | |
691 | STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception) | |
692 | STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception) | |
693 | STD_EXCEPTION_COMMON(0xf00, performance_monitor, .performance_monitor_exception) | |
694 | STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception) | |
695 | #ifdef CONFIG_ALTIVEC | |
696 | STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception) | |
697 | #else | |
698 | STD_EXCEPTION_COMMON(0x1700, altivec_assist, .unknown_exception) | |
699 | #endif | |
700 | ||
701 | /* | |
702 | * Here we have detected that the kernel stack pointer is bad. | |
703 | * R9 contains the saved CR, r13 points to the paca, | |
704 | * r10 contains the (bad) kernel stack pointer, | |
705 | * r11 and r12 contain the saved SRR0 and SRR1. | |
706 | * We switch to using an emergency stack, save the registers there, | |
707 | * and call kernel_bad_stack(), which panics. | |
708 | */ | |
709 | bad_stack: | |
710 | ld r1,PACAEMERGSP(r13) | |
711 | subi r1,r1,64+INT_FRAME_SIZE | |
712 | std r9,_CCR(r1) | |
713 | std r10,GPR1(r1) | |
714 | std r11,_NIP(r1) | |
715 | std r12,_MSR(r1) | |
b5bbeb23 PM |
716 | mfspr r11,SPRN_DAR |
717 | mfspr r12,SPRN_DSISR | |
14cf11af PM |
718 | std r11,_DAR(r1) |
719 | std r12,_DSISR(r1) | |
720 | mflr r10 | |
721 | mfctr r11 | |
722 | mfxer r12 | |
723 | std r10,_LINK(r1) | |
724 | std r11,_CTR(r1) | |
725 | std r12,_XER(r1) | |
726 | SAVE_GPR(0,r1) | |
727 | SAVE_GPR(2,r1) | |
728 | SAVE_4GPRS(3,r1) | |
729 | SAVE_2GPRS(7,r1) | |
730 | SAVE_10GPRS(12,r1) | |
731 | SAVE_10GPRS(22,r1) | |
732 | addi r11,r1,INT_FRAME_SIZE | |
733 | std r11,0(r1) | |
734 | li r12,0 | |
735 | std r12,0(r11) | |
736 | ld r2,PACATOC(r13) | |
737 | 1: addi r3,r1,STACK_FRAME_OVERHEAD | |
738 | bl .kernel_bad_stack | |
739 | b 1b | |
740 | ||
741 | /* | |
742 | * Return from an exception with minimal checks. | |
743 | * The caller is assumed to have done EXCEPTION_PROLOG_COMMON. | |
744 | * If interrupts have been enabled, or anything has been | |
745 | * done that might have changed the scheduling status of | |
746 | * any task or sent any task a signal, you should use | |
747 | * ret_from_except or ret_from_except_lite instead of this. | |
748 | */ | |
749 | fast_exception_return: | |
750 | ld r12,_MSR(r1) | |
751 | ld r11,_NIP(r1) | |
752 | andi. r3,r12,MSR_RI /* check if RI is set */ | |
753 | beq- unrecov_fer | |
754 | ld r3,_CCR(r1) | |
755 | ld r4,_LINK(r1) | |
756 | ld r5,_CTR(r1) | |
757 | ld r6,_XER(r1) | |
758 | mtcr r3 | |
759 | mtlr r4 | |
760 | mtctr r5 | |
761 | mtxer r6 | |
762 | REST_GPR(0, r1) | |
763 | REST_8GPRS(2, r1) | |
764 | ||
765 | mfmsr r10 | |
766 | clrrdi r10,r10,2 /* clear RI (LE is 0 already) */ | |
767 | mtmsrd r10,1 | |
768 | ||
b5bbeb23 PM |
769 | mtspr SPRN_SRR1,r12 |
770 | mtspr SPRN_SRR0,r11 | |
14cf11af PM |
771 | REST_4GPRS(10, r1) |
772 | ld r1,GPR1(r1) | |
773 | rfid | |
774 | b . /* prevent speculative execution */ | |
775 | ||
776 | unrecov_fer: | |
777 | bl .save_nvgprs | |
778 | 1: addi r3,r1,STACK_FRAME_OVERHEAD | |
779 | bl .unrecoverable_exception | |
780 | b 1b | |
781 | ||
782 | /* | |
783 | * Here r13 points to the paca, r9 contains the saved CR, | |
784 | * SRR0 and SRR1 are saved in r11 and r12, | |
785 | * r9 - r13 are saved in paca->exgen. | |
786 | */ | |
787 | .align 7 | |
788 | .globl data_access_common | |
789 | data_access_common: | |
790 | RUNLATCH_ON(r10) /* It wont fit in the 0x300 handler */ | |
b5bbeb23 | 791 | mfspr r10,SPRN_DAR |
14cf11af | 792 | std r10,PACA_EXGEN+EX_DAR(r13) |
b5bbeb23 | 793 | mfspr r10,SPRN_DSISR |
14cf11af PM |
794 | stw r10,PACA_EXGEN+EX_DSISR(r13) |
795 | EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN) | |
796 | ld r3,PACA_EXGEN+EX_DAR(r13) | |
797 | lwz r4,PACA_EXGEN+EX_DSISR(r13) | |
798 | li r5,0x300 | |
799 | b .do_hash_page /* Try to handle as hpte fault */ | |
800 | ||
801 | .align 7 | |
802 | .globl instruction_access_common | |
803 | instruction_access_common: | |
804 | EXCEPTION_PROLOG_COMMON(0x400, PACA_EXGEN) | |
805 | ld r3,_NIP(r1) | |
806 | andis. r4,r12,0x5820 | |
807 | li r5,0x400 | |
808 | b .do_hash_page /* Try to handle as hpte fault */ | |
809 | ||
810 | .align 7 | |
811 | .globl hardware_interrupt_common | |
812 | .globl hardware_interrupt_entry | |
813 | hardware_interrupt_common: | |
814 | EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN) | |
815 | hardware_interrupt_entry: | |
816 | DISABLE_INTS | |
817 | addi r3,r1,STACK_FRAME_OVERHEAD | |
818 | bl .do_IRQ | |
819 | b .ret_from_except_lite | |
820 | ||
821 | .align 7 | |
822 | .globl alignment_common | |
823 | alignment_common: | |
b5bbeb23 | 824 | mfspr r10,SPRN_DAR |
14cf11af | 825 | std r10,PACA_EXGEN+EX_DAR(r13) |
b5bbeb23 | 826 | mfspr r10,SPRN_DSISR |
14cf11af PM |
827 | stw r10,PACA_EXGEN+EX_DSISR(r13) |
828 | EXCEPTION_PROLOG_COMMON(0x600, PACA_EXGEN) | |
829 | ld r3,PACA_EXGEN+EX_DAR(r13) | |
830 | lwz r4,PACA_EXGEN+EX_DSISR(r13) | |
831 | std r3,_DAR(r1) | |
832 | std r4,_DSISR(r1) | |
833 | bl .save_nvgprs | |
834 | addi r3,r1,STACK_FRAME_OVERHEAD | |
835 | ENABLE_INTS | |
836 | bl .alignment_exception | |
837 | b .ret_from_except | |
838 | ||
839 | .align 7 | |
840 | .globl program_check_common | |
841 | program_check_common: | |
842 | EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN) | |
843 | bl .save_nvgprs | |
844 | addi r3,r1,STACK_FRAME_OVERHEAD | |
845 | ENABLE_INTS | |
846 | bl .program_check_exception | |
847 | b .ret_from_except | |
848 | ||
849 | .align 7 | |
850 | .globl fp_unavailable_common | |
851 | fp_unavailable_common: | |
852 | EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN) | |
853 | bne .load_up_fpu /* if from user, just load it up */ | |
854 | bl .save_nvgprs | |
855 | addi r3,r1,STACK_FRAME_OVERHEAD | |
856 | ENABLE_INTS | |
857 | bl .kernel_fp_unavailable_exception | |
858 | BUG_OPCODE | |
859 | ||
14cf11af PM |
860 | .align 7 |
861 | .globl altivec_unavailable_common | |
862 | altivec_unavailable_common: | |
863 | EXCEPTION_PROLOG_COMMON(0xf20, PACA_EXGEN) | |
864 | #ifdef CONFIG_ALTIVEC | |
865 | BEGIN_FTR_SECTION | |
866 | bne .load_up_altivec /* if from user, just load it up */ | |
867 | END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) | |
868 | #endif | |
869 | bl .save_nvgprs | |
870 | addi r3,r1,STACK_FRAME_OVERHEAD | |
871 | ENABLE_INTS | |
872 | bl .altivec_unavailable_exception | |
873 | b .ret_from_except | |
874 | ||
875 | #ifdef CONFIG_ALTIVEC | |
876 | /* | |
877 | * load_up_altivec(unused, unused, tsk) | |
878 | * Disable VMX for the task which had it previously, | |
879 | * and save its vector registers in its thread_struct. | |
880 | * Enables the VMX for use in the kernel on return. | |
881 | * On SMP we know the VMX is free, since we give it up every | |
882 | * switch (ie, no lazy save of the vector registers). | |
883 | * On entry: r13 == 'current' && last_task_used_altivec != 'current' | |
884 | */ | |
885 | _STATIC(load_up_altivec) | |
886 | mfmsr r5 /* grab the current MSR */ | |
887 | oris r5,r5,MSR_VEC@h | |
888 | mtmsrd r5 /* enable use of VMX now */ | |
889 | isync | |
890 | ||
891 | /* | |
892 | * For SMP, we don't do lazy VMX switching because it just gets too | |
893 | * horrendously complex, especially when a task switches from one CPU | |
894 | * to another. Instead we call giveup_altvec in switch_to. | |
895 | * VRSAVE isn't dealt with here, that is done in the normal context | |
896 | * switch code. Note that we could rely on vrsave value to eventually | |
897 | * avoid saving all of the VREGs here... | |
898 | */ | |
899 | #ifndef CONFIG_SMP | |
900 | ld r3,last_task_used_altivec@got(r2) | |
901 | ld r4,0(r3) | |
902 | cmpdi 0,r4,0 | |
903 | beq 1f | |
904 | /* Save VMX state to last_task_used_altivec's THREAD struct */ | |
905 | addi r4,r4,THREAD | |
906 | SAVE_32VRS(0,r5,r4) | |
907 | mfvscr vr0 | |
908 | li r10,THREAD_VSCR | |
909 | stvx vr0,r10,r4 | |
910 | /* Disable VMX for last_task_used_altivec */ | |
911 | ld r5,PT_REGS(r4) | |
912 | ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) | |
913 | lis r6,MSR_VEC@h | |
914 | andc r4,r4,r6 | |
915 | std r4,_MSR-STACK_FRAME_OVERHEAD(r5) | |
916 | 1: | |
917 | #endif /* CONFIG_SMP */ | |
918 | /* Hack: if we get an altivec unavailable trap with VRSAVE | |
919 | * set to all zeros, we assume this is a broken application | |
920 | * that fails to set it properly, and thus we switch it to | |
921 | * all 1's | |
922 | */ | |
923 | mfspr r4,SPRN_VRSAVE | |
924 | cmpdi 0,r4,0 | |
925 | bne+ 1f | |
926 | li r4,-1 | |
927 | mtspr SPRN_VRSAVE,r4 | |
928 | 1: | |
929 | /* enable use of VMX after return */ | |
930 | ld r4,PACACURRENT(r13) | |
931 | addi r5,r4,THREAD /* Get THREAD */ | |
932 | oris r12,r12,MSR_VEC@h | |
933 | std r12,_MSR(r1) | |
934 | li r4,1 | |
935 | li r10,THREAD_VSCR | |
936 | stw r4,THREAD_USED_VR(r5) | |
937 | lvx vr0,r10,r5 | |
938 | mtvscr vr0 | |
939 | REST_32VRS(0,r4,r5) | |
940 | #ifndef CONFIG_SMP | |
941 | /* Update last_task_used_math to 'current' */ | |
942 | subi r4,r5,THREAD /* Back to 'current' */ | |
943 | std r4,0(r3) | |
944 | #endif /* CONFIG_SMP */ | |
945 | /* restore registers and return */ | |
946 | b fast_exception_return | |
947 | #endif /* CONFIG_ALTIVEC */ | |
948 | ||
949 | /* | |
950 | * Hash table stuff | |
951 | */ | |
952 | .align 7 | |
953 | _GLOBAL(do_hash_page) | |
954 | std r3,_DAR(r1) | |
955 | std r4,_DSISR(r1) | |
956 | ||
957 | andis. r0,r4,0xa450 /* weird error? */ | |
958 | bne- .handle_page_fault /* if not, try to insert a HPTE */ | |
959 | BEGIN_FTR_SECTION | |
960 | andis. r0,r4,0x0020 /* Is it a segment table fault? */ | |
961 | bne- .do_ste_alloc /* If so handle it */ | |
962 | END_FTR_SECTION_IFCLR(CPU_FTR_SLB) | |
963 | ||
964 | /* | |
965 | * We need to set the _PAGE_USER bit if MSR_PR is set or if we are | |
966 | * accessing a userspace segment (even from the kernel). We assume | |
967 | * kernel addresses always have the high bit set. | |
968 | */ | |
969 | rlwinm r4,r4,32-25+9,31-9,31-9 /* DSISR_STORE -> _PAGE_RW */ | |
970 | rotldi r0,r3,15 /* Move high bit into MSR_PR posn */ | |
971 | orc r0,r12,r0 /* MSR_PR | ~high_bit */ | |
972 | rlwimi r4,r0,32-13,30,30 /* becomes _PAGE_USER access bit */ | |
973 | ori r4,r4,1 /* add _PAGE_PRESENT */ | |
974 | rlwimi r4,r5,22+2,31-2,31-2 /* Set _PAGE_EXEC if trap is 0x400 */ | |
975 | ||
976 | /* | |
977 | * On iSeries, we soft-disable interrupts here, then | |
978 | * hard-enable interrupts so that the hash_page code can spin on | |
979 | * the hash_table_lock without problems on a shared processor. | |
980 | */ | |
981 | DISABLE_INTS | |
982 | ||
983 | /* | |
984 | * r3 contains the faulting address | |
985 | * r4 contains the required access permissions | |
986 | * r5 contains the trap number | |
987 | * | |
988 | * at return r3 = 0 for success | |
989 | */ | |
990 | bl .hash_page /* build HPTE if possible */ | |
991 | cmpdi r3,0 /* see if hash_page succeeded */ | |
992 | ||
993 | #ifdef DO_SOFT_DISABLE | |
994 | /* | |
995 | * If we had interrupts soft-enabled at the point where the | |
996 | * DSI/ISI occurred, and an interrupt came in during hash_page, | |
997 | * handle it now. | |
998 | * We jump to ret_from_except_lite rather than fast_exception_return | |
999 | * because ret_from_except_lite will check for and handle pending | |
1000 | * interrupts if necessary. | |
1001 | */ | |
1002 | beq .ret_from_except_lite | |
1003 | /* For a hash failure, we don't bother re-enabling interrupts */ | |
1004 | ble- 12f | |
1005 | ||
1006 | /* | |
1007 | * hash_page couldn't handle it, set soft interrupt enable back | |
1008 | * to what it was before the trap. Note that .local_irq_restore | |
1009 | * handles any interrupts pending at this point. | |
1010 | */ | |
1011 | ld r3,SOFTE(r1) | |
1012 | bl .local_irq_restore | |
1013 | b 11f | |
1014 | #else | |
1015 | beq fast_exception_return /* Return from exception on success */ | |
1016 | ble- 12f /* Failure return from hash_page */ | |
1017 | ||
1018 | /* fall through */ | |
1019 | #endif | |
1020 | ||
1021 | /* Here we have a page fault that hash_page can't handle. */ | |
1022 | _GLOBAL(handle_page_fault) | |
1023 | ENABLE_INTS | |
1024 | 11: ld r4,_DAR(r1) | |
1025 | ld r5,_DSISR(r1) | |
1026 | addi r3,r1,STACK_FRAME_OVERHEAD | |
1027 | bl .do_page_fault | |
1028 | cmpdi r3,0 | |
1029 | beq+ .ret_from_except_lite | |
1030 | bl .save_nvgprs | |
1031 | mr r5,r3 | |
1032 | addi r3,r1,STACK_FRAME_OVERHEAD | |
1033 | lwz r4,_DAR(r1) | |
1034 | bl .bad_page_fault | |
1035 | b .ret_from_except | |
1036 | ||
1037 | /* We have a page fault that hash_page could handle but HV refused | |
1038 | * the PTE insertion | |
1039 | */ | |
1040 | 12: bl .save_nvgprs | |
1041 | addi r3,r1,STACK_FRAME_OVERHEAD | |
1042 | lwz r4,_DAR(r1) | |
1043 | bl .low_hash_fault | |
1044 | b .ret_from_except | |
1045 | ||
1046 | /* here we have a segment miss */ | |
1047 | _GLOBAL(do_ste_alloc) | |
1048 | bl .ste_allocate /* try to insert stab entry */ | |
1049 | cmpdi r3,0 | |
1050 | beq+ fast_exception_return | |
1051 | b .handle_page_fault | |
1052 | ||
1053 | /* | |
1054 | * r13 points to the PACA, r9 contains the saved CR, | |
1055 | * r11 and r12 contain the saved SRR0 and SRR1. | |
1056 | * r9 - r13 are saved in paca->exslb. | |
1057 | * We assume we aren't going to take any exceptions during this procedure. | |
1058 | * We assume (DAR >> 60) == 0xc. | |
1059 | */ | |
1060 | .align 7 | |
1061 | _GLOBAL(do_stab_bolted) | |
1062 | stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */ | |
1063 | std r11,PACA_EXSLB+EX_SRR0(r13) /* save SRR0 in exc. frame */ | |
1064 | ||
1065 | /* Hash to the primary group */ | |
1066 | ld r10,PACASTABVIRT(r13) | |
b5bbeb23 | 1067 | mfspr r11,SPRN_DAR |
14cf11af PM |
1068 | srdi r11,r11,28 |
1069 | rldimi r10,r11,7,52 /* r10 = first ste of the group */ | |
1070 | ||
1071 | /* Calculate VSID */ | |
1072 | /* This is a kernel address, so protovsid = ESID */ | |
1073 | ASM_VSID_SCRAMBLE(r11, r9) | |
1074 | rldic r9,r11,12,16 /* r9 = vsid << 12 */ | |
1075 | ||
1076 | /* Search the primary group for a free entry */ | |
1077 | 1: ld r11,0(r10) /* Test valid bit of the current ste */ | |
1078 | andi. r11,r11,0x80 | |
1079 | beq 2f | |
1080 | addi r10,r10,16 | |
1081 | andi. r11,r10,0x70 | |
1082 | bne 1b | |
1083 | ||
1084 | /* Stick for only searching the primary group for now. */ | |
1085 | /* At least for now, we use a very simple random castout scheme */ | |
1086 | /* Use the TB as a random number ; OR in 1 to avoid entry 0 */ | |
1087 | mftb r11 | |
1088 | rldic r11,r11,4,57 /* r11 = (r11 << 4) & 0x70 */ | |
1089 | ori r11,r11,0x10 | |
1090 | ||
1091 | /* r10 currently points to an ste one past the group of interest */ | |
1092 | /* make it point to the randomly selected entry */ | |
1093 | subi r10,r10,128 | |
1094 | or r10,r10,r11 /* r10 is the entry to invalidate */ | |
1095 | ||
1096 | isync /* mark the entry invalid */ | |
1097 | ld r11,0(r10) | |
1098 | rldicl r11,r11,56,1 /* clear the valid bit */ | |
1099 | rotldi r11,r11,8 | |
1100 | std r11,0(r10) | |
1101 | sync | |
1102 | ||
1103 | clrrdi r11,r11,28 /* Get the esid part of the ste */ | |
1104 | slbie r11 | |
1105 | ||
1106 | 2: std r9,8(r10) /* Store the vsid part of the ste */ | |
1107 | eieio | |
1108 | ||
b5bbeb23 | 1109 | mfspr r11,SPRN_DAR /* Get the new esid */ |
14cf11af PM |
1110 | clrrdi r11,r11,28 /* Permits a full 32b of ESID */ |
1111 | ori r11,r11,0x90 /* Turn on valid and kp */ | |
1112 | std r11,0(r10) /* Put new entry back into the stab */ | |
1113 | ||
1114 | sync | |
1115 | ||
1116 | /* All done -- return from exception. */ | |
1117 | lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */ | |
1118 | ld r11,PACA_EXSLB+EX_SRR0(r13) /* get saved SRR0 */ | |
1119 | ||
1120 | andi. r10,r12,MSR_RI | |
1121 | beq- unrecov_slb | |
1122 | ||
1123 | mtcrf 0x80,r9 /* restore CR */ | |
1124 | ||
1125 | mfmsr r10 | |
1126 | clrrdi r10,r10,2 | |
1127 | mtmsrd r10,1 | |
1128 | ||
b5bbeb23 PM |
1129 | mtspr SPRN_SRR0,r11 |
1130 | mtspr SPRN_SRR1,r12 | |
14cf11af PM |
1131 | ld r9,PACA_EXSLB+EX_R9(r13) |
1132 | ld r10,PACA_EXSLB+EX_R10(r13) | |
1133 | ld r11,PACA_EXSLB+EX_R11(r13) | |
1134 | ld r12,PACA_EXSLB+EX_R12(r13) | |
1135 | ld r13,PACA_EXSLB+EX_R13(r13) | |
1136 | rfid | |
1137 | b . /* prevent speculative execution */ | |
1138 | ||
1139 | /* | |
1140 | * r13 points to the PACA, r9 contains the saved CR, | |
1141 | * r11 and r12 contain the saved SRR0 and SRR1. | |
1142 | * r3 has the faulting address | |
1143 | * r9 - r13 are saved in paca->exslb. | |
1144 | * r3 is saved in paca->slb_r3 | |
1145 | * We assume we aren't going to take any exceptions during this procedure. | |
1146 | */ | |
1147 | _GLOBAL(do_slb_miss) | |
1148 | mflr r10 | |
1149 | ||
1150 | stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */ | |
1151 | std r10,PACA_EXSLB+EX_LR(r13) /* save LR */ | |
1152 | ||
1153 | bl .slb_allocate /* handle it */ | |
1154 | ||
1155 | /* All done -- return from exception. */ | |
1156 | ||
1157 | ld r10,PACA_EXSLB+EX_LR(r13) | |
1158 | ld r3,PACA_EXSLB+EX_R3(r13) | |
1159 | lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */ | |
1160 | #ifdef CONFIG_PPC_ISERIES | |
1161 | ld r11,PACALPPACA+LPPACASRR0(r13) /* get SRR0 value */ | |
1162 | #endif /* CONFIG_PPC_ISERIES */ | |
1163 | ||
1164 | mtlr r10 | |
1165 | ||
1166 | andi. r10,r12,MSR_RI /* check for unrecoverable exception */ | |
1167 | beq- unrecov_slb | |
1168 | ||
1169 | .machine push | |
1170 | .machine "power4" | |
1171 | mtcrf 0x80,r9 | |
1172 | mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */ | |
1173 | .machine pop | |
1174 | ||
1175 | #ifdef CONFIG_PPC_ISERIES | |
b5bbeb23 PM |
1176 | mtspr SPRN_SRR0,r11 |
1177 | mtspr SPRN_SRR1,r12 | |
14cf11af PM |
1178 | #endif /* CONFIG_PPC_ISERIES */ |
1179 | ld r9,PACA_EXSLB+EX_R9(r13) | |
1180 | ld r10,PACA_EXSLB+EX_R10(r13) | |
1181 | ld r11,PACA_EXSLB+EX_R11(r13) | |
1182 | ld r12,PACA_EXSLB+EX_R12(r13) | |
1183 | ld r13,PACA_EXSLB+EX_R13(r13) | |
1184 | rfid | |
1185 | b . /* prevent speculative execution */ | |
1186 | ||
1187 | unrecov_slb: | |
1188 | EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB) | |
1189 | DISABLE_INTS | |
1190 | bl .save_nvgprs | |
1191 | 1: addi r3,r1,STACK_FRAME_OVERHEAD | |
1192 | bl .unrecoverable_exception | |
1193 | b 1b | |
1194 | ||
1195 | /* | |
1196 | * Space for CPU0's segment table. | |
1197 | * | |
1198 | * On iSeries, the hypervisor must fill in at least one entry before | |
1199 | * we get control (with relocate on). The address is give to the hv | |
ee400b63 | 1200 | * as a page number (see xLparMap in lpardata.c), so this must be at a |
14cf11af PM |
1201 | * fixed address (the linker can't compute (u64)&initial_stab >> |
1202 | * PAGE_SHIFT). | |
1203 | */ | |
1204 | . = STAB0_PHYS_ADDR /* 0x6000 */ | |
1205 | .globl initial_stab | |
1206 | initial_stab: | |
1207 | .space 4096 | |
1208 | ||
1209 | /* | |
1210 | * Data area reserved for FWNMI option. | |
1211 | * This address (0x7000) is fixed by the RPA. | |
1212 | */ | |
1213 | .= 0x7000 | |
1214 | .globl fwnmi_data_area | |
1215 | fwnmi_data_area: | |
1216 | ||
1217 | /* iSeries does not use the FWNMI stuff, so it is safe to put | |
1218 | * this here, even if we later allow kernels that will boot on | |
1219 | * both pSeries and iSeries */ | |
1220 | #ifdef CONFIG_PPC_ISERIES | |
1221 | . = LPARMAP_PHYS | |
1222 | #include "lparmap.s" | |
1223 | /* | |
1224 | * This ".text" is here for old compilers that generate a trailing | |
1225 | * .note section when compiling .c files to .s | |
1226 | */ | |
1227 | .text | |
1228 | #endif /* CONFIG_PPC_ISERIES */ | |
1229 | ||
1230 | . = 0x8000 | |
1231 | ||
1232 | /* | |
1233 | * On pSeries, secondary processors spin in the following code. | |
1234 | * At entry, r3 = this processor's number (physical cpu id) | |
1235 | */ | |
1236 | _GLOBAL(pSeries_secondary_smp_init) | |
1237 | mr r24,r3 | |
1238 | ||
1239 | /* turn on 64-bit mode */ | |
1240 | bl .enable_64b_mode | |
1241 | isync | |
1242 | ||
1243 | /* Copy some CPU settings from CPU 0 */ | |
1244 | bl .__restore_cpu_setup | |
1245 | ||
1246 | /* Set up a paca value for this processor. Since we have the | |
1247 | * physical cpu id in r24, we need to search the pacas to find | |
1248 | * which logical id maps to our physical one. | |
1249 | */ | |
1250 | LOADADDR(r13, paca) /* Get base vaddr of paca array */ | |
1251 | li r5,0 /* logical cpu id */ | |
1252 | 1: lhz r6,PACAHWCPUID(r13) /* Load HW procid from paca */ | |
1253 | cmpw r6,r24 /* Compare to our id */ | |
1254 | beq 2f | |
1255 | addi r13,r13,PACA_SIZE /* Loop to next PACA on miss */ | |
1256 | addi r5,r5,1 | |
1257 | cmpwi r5,NR_CPUS | |
1258 | blt 1b | |
1259 | ||
1260 | mr r3,r24 /* not found, copy phys to r3 */ | |
1261 | b .kexec_wait /* next kernel might do better */ | |
1262 | ||
b5bbeb23 | 1263 | 2: mtspr SPRN_SPRG3,r13 /* Save vaddr of paca in SPRG3 */ |
14cf11af PM |
1264 | /* From now on, r24 is expected to be logical cpuid */ |
1265 | mr r24,r5 | |
1266 | 3: HMT_LOW | |
1267 | lbz r23,PACAPROCSTART(r13) /* Test if this processor should */ | |
1268 | /* start. */ | |
1269 | sync | |
1270 | ||
1271 | /* Create a temp kernel stack for use before relocation is on. */ | |
1272 | ld r1,PACAEMERGSP(r13) | |
1273 | subi r1,r1,STACK_FRAME_OVERHEAD | |
1274 | ||
1275 | cmpwi 0,r23,0 | |
1276 | #ifdef CONFIG_SMP | |
1277 | bne .__secondary_start | |
1278 | #endif | |
1279 | b 3b /* Loop until told to go */ | |
1280 | ||
1281 | #ifdef CONFIG_PPC_ISERIES | |
1282 | _STATIC(__start_initialization_iSeries) | |
1283 | /* Clear out the BSS */ | |
1284 | LOADADDR(r11,__bss_stop) | |
1285 | LOADADDR(r8,__bss_start) | |
1286 | sub r11,r11,r8 /* bss size */ | |
1287 | addi r11,r11,7 /* round up to an even double word */ | |
1288 | rldicl. r11,r11,61,3 /* shift right by 3 */ | |
1289 | beq 4f | |
1290 | addi r8,r8,-8 | |
1291 | li r0,0 | |
1292 | mtctr r11 /* zero this many doublewords */ | |
1293 | 3: stdu r0,8(r8) | |
1294 | bdnz 3b | |
1295 | 4: | |
1296 | LOADADDR(r1,init_thread_union) | |
1297 | addi r1,r1,THREAD_SIZE | |
1298 | li r0,0 | |
1299 | stdu r0,-STACK_FRAME_OVERHEAD(r1) | |
1300 | ||
1301 | LOADADDR(r3,cpu_specs) | |
1302 | LOADADDR(r4,cur_cpu_spec) | |
1303 | li r5,0 | |
1304 | bl .identify_cpu | |
1305 | ||
1306 | LOADADDR(r2,__toc_start) | |
1307 | addi r2,r2,0x4000 | |
1308 | addi r2,r2,0x4000 | |
1309 | ||
1310 | bl .iSeries_early_setup | |
ee400b63 | 1311 | bl .early_setup |
14cf11af PM |
1312 | |
1313 | /* relocation is on at this point */ | |
1314 | ||
1315 | b .start_here_common | |
1316 | #endif /* CONFIG_PPC_ISERIES */ | |
1317 | ||
1318 | #ifdef CONFIG_PPC_MULTIPLATFORM | |
1319 | ||
1320 | _STATIC(__mmu_off) | |
1321 | mfmsr r3 | |
1322 | andi. r0,r3,MSR_IR|MSR_DR | |
1323 | beqlr | |
1324 | andc r3,r3,r0 | |
1325 | mtspr SPRN_SRR0,r4 | |
1326 | mtspr SPRN_SRR1,r3 | |
1327 | sync | |
1328 | rfid | |
1329 | b . /* prevent speculative execution */ | |
1330 | ||
1331 | ||
1332 | /* | |
1333 | * Here is our main kernel entry point. We support currently 2 kind of entries | |
1334 | * depending on the value of r5. | |
1335 | * | |
1336 | * r5 != NULL -> OF entry, we go to prom_init, "legacy" parameter content | |
1337 | * in r3...r7 | |
1338 | * | |
1339 | * r5 == NULL -> kexec style entry. r3 is a physical pointer to the | |
1340 | * DT block, r4 is a physical pointer to the kernel itself | |
1341 | * | |
1342 | */ | |
1343 | _GLOBAL(__start_initialization_multiplatform) | |
1344 | /* | |
1345 | * Are we booted from a PROM Of-type client-interface ? | |
1346 | */ | |
1347 | cmpldi cr0,r5,0 | |
1348 | bne .__boot_from_prom /* yes -> prom */ | |
1349 | ||
1350 | /* Save parameters */ | |
1351 | mr r31,r3 | |
1352 | mr r30,r4 | |
1353 | ||
1354 | /* Make sure we are running in 64 bits mode */ | |
1355 | bl .enable_64b_mode | |
1356 | ||
1357 | /* Setup some critical 970 SPRs before switching MMU off */ | |
1358 | bl .__970_cpu_preinit | |
1359 | ||
1360 | /* cpu # */ | |
1361 | li r24,0 | |
1362 | ||
1363 | /* Switch off MMU if not already */ | |
1364 | LOADADDR(r4, .__after_prom_start - KERNELBASE) | |
1365 | add r4,r4,r30 | |
1366 | bl .__mmu_off | |
1367 | b .__after_prom_start | |
1368 | ||
1369 | _STATIC(__boot_from_prom) | |
1370 | /* Save parameters */ | |
1371 | mr r31,r3 | |
1372 | mr r30,r4 | |
1373 | mr r29,r5 | |
1374 | mr r28,r6 | |
1375 | mr r27,r7 | |
1376 | ||
1377 | /* Make sure we are running in 64 bits mode */ | |
1378 | bl .enable_64b_mode | |
1379 | ||
1380 | /* put a relocation offset into r3 */ | |
1381 | bl .reloc_offset | |
1382 | ||
1383 | LOADADDR(r2,__toc_start) | |
1384 | addi r2,r2,0x4000 | |
1385 | addi r2,r2,0x4000 | |
1386 | ||
1387 | /* Relocate the TOC from a virt addr to a real addr */ | |
5a408329 | 1388 | add r2,r2,r3 |
14cf11af PM |
1389 | |
1390 | /* Restore parameters */ | |
1391 | mr r3,r31 | |
1392 | mr r4,r30 | |
1393 | mr r5,r29 | |
1394 | mr r6,r28 | |
1395 | mr r7,r27 | |
1396 | ||
1397 | /* Do all of the interaction with OF client interface */ | |
1398 | bl .prom_init | |
1399 | /* We never return */ | |
1400 | trap | |
1401 | ||
1402 | /* | |
1403 | * At this point, r3 contains the physical address we are running at, | |
1404 | * returned by prom_init() | |
1405 | */ | |
1406 | _STATIC(__after_prom_start) | |
1407 | ||
1408 | /* | |
1409 | * We need to run with __start at physical address 0. | |
1410 | * This will leave some code in the first 256B of | |
1411 | * real memory, which are reserved for software use. | |
1412 | * The remainder of the first page is loaded with the fixed | |
1413 | * interrupt vectors. The next two pages are filled with | |
1414 | * unknown exception placeholders. | |
1415 | * | |
1416 | * Note: This process overwrites the OF exception vectors. | |
1417 | * r26 == relocation offset | |
1418 | * r27 == KERNELBASE | |
1419 | */ | |
1420 | bl .reloc_offset | |
1421 | mr r26,r3 | |
1422 | SET_REG_TO_CONST(r27,KERNELBASE) | |
1423 | ||
1424 | li r3,0 /* target addr */ | |
1425 | ||
1426 | // XXX FIXME: Use phys returned by OF (r30) | |
5a408329 | 1427 | add r4,r27,r26 /* source addr */ |
14cf11af PM |
1428 | /* current address of _start */ |
1429 | /* i.e. where we are running */ | |
1430 | /* the source addr */ | |
1431 | ||
1432 | LOADADDR(r5,copy_to_here) /* # bytes of memory to copy */ | |
1433 | sub r5,r5,r27 | |
1434 | ||
1435 | li r6,0x100 /* Start offset, the first 0x100 */ | |
1436 | /* bytes were copied earlier. */ | |
1437 | ||
1438 | bl .copy_and_flush /* copy the first n bytes */ | |
1439 | /* this includes the code being */ | |
1440 | /* executed here. */ | |
1441 | ||
1442 | LOADADDR(r0, 4f) /* Jump to the copy of this code */ | |
1443 | mtctr r0 /* that we just made/relocated */ | |
1444 | bctr | |
1445 | ||
1446 | 4: LOADADDR(r5,klimit) | |
5a408329 | 1447 | add r5,r5,r26 |
14cf11af PM |
1448 | ld r5,0(r5) /* get the value of klimit */ |
1449 | sub r5,r5,r27 | |
1450 | bl .copy_and_flush /* copy the rest */ | |
1451 | b .start_here_multiplatform | |
1452 | ||
1453 | #endif /* CONFIG_PPC_MULTIPLATFORM */ | |
1454 | ||
1455 | /* | |
1456 | * Copy routine used to copy the kernel to start at physical address 0 | |
1457 | * and flush and invalidate the caches as needed. | |
1458 | * r3 = dest addr, r4 = source addr, r5 = copy limit, r6 = start offset | |
1459 | * on exit, r3, r4, r5 are unchanged, r6 is updated to be >= r5. | |
1460 | * | |
1461 | * Note: this routine *only* clobbers r0, r6 and lr | |
1462 | */ | |
1463 | _GLOBAL(copy_and_flush) | |
1464 | addi r5,r5,-8 | |
1465 | addi r6,r6,-8 | |
1466 | 4: li r0,16 /* Use the least common */ | |
1467 | /* denominator cache line */ | |
1468 | /* size. This results in */ | |
1469 | /* extra cache line flushes */ | |
1470 | /* but operation is correct. */ | |
1471 | /* Can't get cache line size */ | |
1472 | /* from NACA as it is being */ | |
1473 | /* moved too. */ | |
1474 | ||
1475 | mtctr r0 /* put # words/line in ctr */ | |
1476 | 3: addi r6,r6,8 /* copy a cache line */ | |
1477 | ldx r0,r6,r4 | |
1478 | stdx r0,r6,r3 | |
1479 | bdnz 3b | |
1480 | dcbst r6,r3 /* write it to memory */ | |
1481 | sync | |
1482 | icbi r6,r3 /* flush the icache line */ | |
1483 | cmpld 0,r6,r5 | |
1484 | blt 4b | |
1485 | sync | |
1486 | addi r5,r5,8 | |
1487 | addi r6,r6,8 | |
1488 | blr | |
1489 | ||
1490 | .align 8 | |
1491 | copy_to_here: | |
1492 | ||
1493 | #ifdef CONFIG_SMP | |
1494 | #ifdef CONFIG_PPC_PMAC | |
1495 | /* | |
1496 | * On PowerMac, secondary processors starts from the reset vector, which | |
1497 | * is temporarily turned into a call to one of the functions below. | |
1498 | */ | |
1499 | .section ".text"; | |
1500 | .align 2 ; | |
1501 | ||
1502 | .globl pmac_secondary_start_1 | |
1503 | pmac_secondary_start_1: | |
1504 | li r24, 1 | |
1505 | b .pmac_secondary_start | |
1506 | ||
1507 | .globl pmac_secondary_start_2 | |
1508 | pmac_secondary_start_2: | |
1509 | li r24, 2 | |
1510 | b .pmac_secondary_start | |
1511 | ||
1512 | .globl pmac_secondary_start_3 | |
1513 | pmac_secondary_start_3: | |
1514 | li r24, 3 | |
1515 | b .pmac_secondary_start | |
1516 | ||
1517 | _GLOBAL(pmac_secondary_start) | |
1518 | /* turn on 64-bit mode */ | |
1519 | bl .enable_64b_mode | |
1520 | isync | |
1521 | ||
1522 | /* Copy some CPU settings from CPU 0 */ | |
1523 | bl .__restore_cpu_setup | |
1524 | ||
1525 | /* pSeries do that early though I don't think we really need it */ | |
1526 | mfmsr r3 | |
1527 | ori r3,r3,MSR_RI | |
1528 | mtmsrd r3 /* RI on */ | |
1529 | ||
1530 | /* Set up a paca value for this processor. */ | |
1531 | LOADADDR(r4, paca) /* Get base vaddr of paca array */ | |
1532 | mulli r13,r24,PACA_SIZE /* Calculate vaddr of right paca */ | |
1533 | add r13,r13,r4 /* for this processor. */ | |
b5bbeb23 | 1534 | mtspr SPRN_SPRG3,r13 /* Save vaddr of paca in SPRG3 */ |
14cf11af PM |
1535 | |
1536 | /* Create a temp kernel stack for use before relocation is on. */ | |
1537 | ld r1,PACAEMERGSP(r13) | |
1538 | subi r1,r1,STACK_FRAME_OVERHEAD | |
1539 | ||
1540 | b .__secondary_start | |
1541 | ||
1542 | #endif /* CONFIG_PPC_PMAC */ | |
1543 | ||
1544 | /* | |
1545 | * This function is called after the master CPU has released the | |
1546 | * secondary processors. The execution environment is relocation off. | |
1547 | * The paca for this processor has the following fields initialized at | |
1548 | * this point: | |
1549 | * 1. Processor number | |
1550 | * 2. Segment table pointer (virtual address) | |
1551 | * On entry the following are set: | |
1552 | * r1 = stack pointer. vaddr for iSeries, raddr (temp stack) for pSeries | |
1553 | * r24 = cpu# (in Linux terms) | |
1554 | * r13 = paca virtual address | |
1555 | * SPRG3 = paca virtual address | |
1556 | */ | |
1557 | _GLOBAL(__secondary_start) | |
1558 | ||
1559 | HMT_MEDIUM /* Set thread priority to MEDIUM */ | |
1560 | ||
1561 | ld r2,PACATOC(r13) | |
1562 | li r6,0 | |
1563 | stb r6,PACAPROCENABLED(r13) | |
1564 | ||
1565 | #ifndef CONFIG_PPC_ISERIES | |
1566 | /* Initialize the page table pointer register. */ | |
1567 | LOADADDR(r6,_SDR1) | |
1568 | ld r6,0(r6) /* get the value of _SDR1 */ | |
b5bbeb23 | 1569 | mtspr SPRN_SDR1,r6 /* set the htab location */ |
14cf11af PM |
1570 | #endif |
1571 | /* Initialize the first segment table (or SLB) entry */ | |
1572 | ld r3,PACASTABVIRT(r13) /* get addr of segment table */ | |
1573 | bl .stab_initialize | |
1574 | ||
1575 | /* Initialize the kernel stack. Just a repeat for iSeries. */ | |
1576 | LOADADDR(r3,current_set) | |
1577 | sldi r28,r24,3 /* get current_set[cpu#] */ | |
1578 | ldx r1,r3,r28 | |
1579 | addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD | |
1580 | std r1,PACAKSAVE(r13) | |
1581 | ||
1582 | ld r3,PACASTABREAL(r13) /* get raddr of segment table */ | |
1583 | ori r4,r3,1 /* turn on valid bit */ | |
1584 | ||
1585 | #ifdef CONFIG_PPC_ISERIES | |
1586 | li r0,-1 /* hypervisor call */ | |
1587 | li r3,1 | |
1588 | sldi r3,r3,63 /* 0x8000000000000000 */ | |
1589 | ori r3,r3,4 /* 0x8000000000000004 */ | |
1590 | sc /* HvCall_setASR */ | |
1591 | #else | |
1592 | /* set the ASR */ | |
1593 | ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ | |
1594 | ld r3,0(r3) | |
1595 | lwz r3,PLATFORM(r3) /* r3 = platform flags */ | |
1596 | andi. r3,r3,PLATFORM_LPAR /* Test if bit 0 is set (LPAR bit) */ | |
1597 | beq 98f /* branch if result is 0 */ | |
b5bbeb23 | 1598 | mfspr r3,SPRN_PVR |
14cf11af PM |
1599 | srwi r3,r3,16 |
1600 | cmpwi r3,0x37 /* SStar */ | |
1601 | beq 97f | |
1602 | cmpwi r3,0x36 /* IStar */ | |
1603 | beq 97f | |
1604 | cmpwi r3,0x34 /* Pulsar */ | |
1605 | bne 98f | |
1606 | 97: li r3,H_SET_ASR /* hcall = H_SET_ASR */ | |
1607 | HVSC /* Invoking hcall */ | |
1608 | b 99f | |
1609 | 98: /* !(rpa hypervisor) || !(star) */ | |
1610 | mtasr r4 /* set the stab location */ | |
1611 | 99: | |
1612 | #endif | |
1613 | li r7,0 | |
1614 | mtlr r7 | |
1615 | ||
1616 | /* enable MMU and jump to start_secondary */ | |
1617 | LOADADDR(r3,.start_secondary_prolog) | |
1618 | SET_REG_TO_CONST(r4, MSR_KERNEL) | |
1619 | #ifdef DO_SOFT_DISABLE | |
1620 | ori r4,r4,MSR_EE | |
1621 | #endif | |
b5bbeb23 PM |
1622 | mtspr SPRN_SRR0,r3 |
1623 | mtspr SPRN_SRR1,r4 | |
14cf11af PM |
1624 | rfid |
1625 | b . /* prevent speculative execution */ | |
1626 | ||
1627 | /* | |
1628 | * Running with relocation on at this point. All we want to do is | |
1629 | * zero the stack back-chain pointer before going into C code. | |
1630 | */ | |
1631 | _GLOBAL(start_secondary_prolog) | |
1632 | li r3,0 | |
1633 | std r3,0(r1) /* Zero the stack frame pointer */ | |
1634 | bl .start_secondary | |
1635 | #endif | |
1636 | ||
1637 | /* | |
1638 | * This subroutine clobbers r11 and r12 | |
1639 | */ | |
1640 | _GLOBAL(enable_64b_mode) | |
1641 | mfmsr r11 /* grab the current MSR */ | |
1642 | li r12,1 | |
1643 | rldicr r12,r12,MSR_SF_LG,(63-MSR_SF_LG) | |
1644 | or r11,r11,r12 | |
1645 | li r12,1 | |
1646 | rldicr r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG) | |
1647 | or r11,r11,r12 | |
1648 | mtmsrd r11 | |
1649 | isync | |
1650 | blr | |
1651 | ||
1652 | #ifdef CONFIG_PPC_MULTIPLATFORM | |
1653 | /* | |
1654 | * This is where the main kernel code starts. | |
1655 | */ | |
1656 | _STATIC(start_here_multiplatform) | |
1657 | /* get a new offset, now that the kernel has moved. */ | |
1658 | bl .reloc_offset | |
1659 | mr r26,r3 | |
1660 | ||
1661 | /* Clear out the BSS. It may have been done in prom_init, | |
1662 | * already but that's irrelevant since prom_init will soon | |
1663 | * be detached from the kernel completely. Besides, we need | |
1664 | * to clear it now for kexec-style entry. | |
1665 | */ | |
1666 | LOADADDR(r11,__bss_stop) | |
1667 | LOADADDR(r8,__bss_start) | |
1668 | sub r11,r11,r8 /* bss size */ | |
1669 | addi r11,r11,7 /* round up to an even double word */ | |
1670 | rldicl. r11,r11,61,3 /* shift right by 3 */ | |
1671 | beq 4f | |
1672 | addi r8,r8,-8 | |
1673 | li r0,0 | |
1674 | mtctr r11 /* zero this many doublewords */ | |
1675 | 3: stdu r0,8(r8) | |
1676 | bdnz 3b | |
1677 | 4: | |
1678 | ||
1679 | mfmsr r6 | |
1680 | ori r6,r6,MSR_RI | |
1681 | mtmsrd r6 /* RI on */ | |
1682 | ||
1683 | #ifdef CONFIG_HMT | |
1684 | /* Start up the second thread on cpu 0 */ | |
b5bbeb23 | 1685 | mfspr r3,SPRN_PVR |
14cf11af PM |
1686 | srwi r3,r3,16 |
1687 | cmpwi r3,0x34 /* Pulsar */ | |
1688 | beq 90f | |
1689 | cmpwi r3,0x36 /* Icestar */ | |
1690 | beq 90f | |
1691 | cmpwi r3,0x37 /* SStar */ | |
1692 | beq 90f | |
1693 | b 91f /* HMT not supported */ | |
1694 | 90: li r3,0 | |
1695 | bl .hmt_start_secondary | |
1696 | 91: | |
1697 | #endif | |
1698 | ||
1699 | /* The following gets the stack and TOC set up with the regs */ | |
1700 | /* pointing to the real addr of the kernel stack. This is */ | |
1701 | /* all done to support the C function call below which sets */ | |
1702 | /* up the htab. This is done because we have relocated the */ | |
1703 | /* kernel but are still running in real mode. */ | |
1704 | ||
1705 | LOADADDR(r3,init_thread_union) | |
5a408329 | 1706 | add r3,r3,r26 |
14cf11af PM |
1707 | |
1708 | /* set up a stack pointer (physical address) */ | |
1709 | addi r1,r3,THREAD_SIZE | |
1710 | li r0,0 | |
1711 | stdu r0,-STACK_FRAME_OVERHEAD(r1) | |
1712 | ||
1713 | /* set up the TOC (physical address) */ | |
1714 | LOADADDR(r2,__toc_start) | |
1715 | addi r2,r2,0x4000 | |
1716 | addi r2,r2,0x4000 | |
5a408329 | 1717 | add r2,r2,r26 |
14cf11af PM |
1718 | |
1719 | LOADADDR(r3,cpu_specs) | |
5a408329 | 1720 | add r3,r3,r26 |
14cf11af | 1721 | LOADADDR(r4,cur_cpu_spec) |
5a408329 | 1722 | add r4,r4,r26 |
14cf11af PM |
1723 | mr r5,r26 |
1724 | bl .identify_cpu | |
1725 | ||
1726 | /* Save some low level config HIDs of CPU0 to be copied to | |
1727 | * other CPUs later on, or used for suspend/resume | |
1728 | */ | |
1729 | bl .__save_cpu_setup | |
1730 | sync | |
1731 | ||
1732 | /* Setup a valid physical PACA pointer in SPRG3 for early_setup | |
1733 | * note that boot_cpuid can always be 0 nowadays since there is | |
1734 | * nowhere it can be initialized differently before we reach this | |
1735 | * code | |
1736 | */ | |
1737 | LOADADDR(r27, boot_cpuid) | |
5a408329 | 1738 | add r27,r27,r26 |
14cf11af PM |
1739 | lwz r27,0(r27) |
1740 | ||
1741 | LOADADDR(r24, paca) /* Get base vaddr of paca array */ | |
1742 | mulli r13,r27,PACA_SIZE /* Calculate vaddr of right paca */ | |
1743 | add r13,r13,r24 /* for this processor. */ | |
5a408329 | 1744 | add r13,r13,r26 /* convert to physical addr */ |
b5bbeb23 | 1745 | mtspr SPRN_SPRG3,r13 /* PPPBBB: Temp... -Peter */ |
14cf11af PM |
1746 | |
1747 | /* Do very early kernel initializations, including initial hash table, | |
1748 | * stab and slb setup before we turn on relocation. */ | |
1749 | ||
1750 | /* Restore parameters passed from prom_init/kexec */ | |
1751 | mr r3,r31 | |
1752 | bl .early_setup | |
1753 | ||
1754 | /* set the ASR */ | |
1755 | ld r3,PACASTABREAL(r13) | |
1756 | ori r4,r3,1 /* turn on valid bit */ | |
1757 | ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ | |
1758 | ld r3,0(r3) | |
1759 | lwz r3,PLATFORM(r3) /* r3 = platform flags */ | |
1760 | andi. r3,r3,PLATFORM_LPAR /* Test if bit 0 is set (LPAR bit) */ | |
1761 | beq 98f /* branch if result is 0 */ | |
b5bbeb23 | 1762 | mfspr r3,SPRN_PVR |
14cf11af PM |
1763 | srwi r3,r3,16 |
1764 | cmpwi r3,0x37 /* SStar */ | |
1765 | beq 97f | |
1766 | cmpwi r3,0x36 /* IStar */ | |
1767 | beq 97f | |
1768 | cmpwi r3,0x34 /* Pulsar */ | |
1769 | bne 98f | |
1770 | 97: li r3,H_SET_ASR /* hcall = H_SET_ASR */ | |
1771 | HVSC /* Invoking hcall */ | |
1772 | b 99f | |
1773 | 98: /* !(rpa hypervisor) || !(star) */ | |
1774 | mtasr r4 /* set the stab location */ | |
1775 | 99: | |
1776 | /* Set SDR1 (hash table pointer) */ | |
1777 | ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ | |
1778 | ld r3,0(r3) | |
1779 | lwz r3,PLATFORM(r3) /* r3 = platform flags */ | |
1780 | /* Test if bit 0 is set (LPAR bit) */ | |
1781 | andi. r3,r3,PLATFORM_LPAR | |
1782 | bne 98f /* branch if result is !0 */ | |
1783 | LOADADDR(r6,_SDR1) /* Only if NOT LPAR */ | |
5a408329 | 1784 | add r6,r6,r26 |
14cf11af | 1785 | ld r6,0(r6) /* get the value of _SDR1 */ |
b5bbeb23 | 1786 | mtspr SPRN_SDR1,r6 /* set the htab location */ |
14cf11af PM |
1787 | 98: |
1788 | LOADADDR(r3,.start_here_common) | |
1789 | SET_REG_TO_CONST(r4, MSR_KERNEL) | |
b5bbeb23 PM |
1790 | mtspr SPRN_SRR0,r3 |
1791 | mtspr SPRN_SRR1,r4 | |
14cf11af PM |
1792 | rfid |
1793 | b . /* prevent speculative execution */ | |
1794 | #endif /* CONFIG_PPC_MULTIPLATFORM */ | |
1795 | ||
1796 | /* This is where all platforms converge execution */ | |
1797 | _STATIC(start_here_common) | |
1798 | /* relocation is on at this point */ | |
1799 | ||
1800 | /* The following code sets up the SP and TOC now that we are */ | |
1801 | /* running with translation enabled. */ | |
1802 | ||
1803 | LOADADDR(r3,init_thread_union) | |
1804 | ||
1805 | /* set up the stack */ | |
1806 | addi r1,r3,THREAD_SIZE | |
1807 | li r0,0 | |
1808 | stdu r0,-STACK_FRAME_OVERHEAD(r1) | |
1809 | ||
1810 | /* Apply the CPUs-specific fixups (nop out sections not relevant | |
1811 | * to this CPU | |
1812 | */ | |
1813 | li r3,0 | |
1814 | bl .do_cpu_ftr_fixups | |
1815 | ||
1816 | LOADADDR(r26, boot_cpuid) | |
1817 | lwz r26,0(r26) | |
1818 | ||
1819 | LOADADDR(r24, paca) /* Get base vaddr of paca array */ | |
1820 | mulli r13,r26,PACA_SIZE /* Calculate vaddr of right paca */ | |
1821 | add r13,r13,r24 /* for this processor. */ | |
b5bbeb23 | 1822 | mtspr SPRN_SPRG3,r13 |
14cf11af PM |
1823 | |
1824 | /* ptr to current */ | |
1825 | LOADADDR(r4,init_task) | |
1826 | std r4,PACACURRENT(r13) | |
1827 | ||
1828 | /* Load the TOC */ | |
1829 | ld r2,PACATOC(r13) | |
1830 | std r1,PACAKSAVE(r13) | |
1831 | ||
1832 | bl .setup_system | |
1833 | ||
1834 | /* Load up the kernel context */ | |
1835 | 5: | |
1836 | #ifdef DO_SOFT_DISABLE | |
1837 | li r5,0 | |
1838 | stb r5,PACAPROCENABLED(r13) /* Soft Disabled */ | |
1839 | mfmsr r5 | |
1840 | ori r5,r5,MSR_EE /* Hard Enabled */ | |
1841 | mtmsrd r5 | |
1842 | #endif | |
1843 | ||
1844 | bl .start_kernel | |
1845 | ||
1846 | _GLOBAL(hmt_init) | |
1847 | #ifdef CONFIG_HMT | |
1848 | LOADADDR(r5, hmt_thread_data) | |
b5bbeb23 | 1849 | mfspr r7,SPRN_PVR |
14cf11af PM |
1850 | srwi r7,r7,16 |
1851 | cmpwi r7,0x34 /* Pulsar */ | |
1852 | beq 90f | |
1853 | cmpwi r7,0x36 /* Icestar */ | |
1854 | beq 91f | |
1855 | cmpwi r7,0x37 /* SStar */ | |
1856 | beq 91f | |
1857 | b 101f | |
b5bbeb23 | 1858 | 90: mfspr r6,SPRN_PIR |
14cf11af PM |
1859 | andi. r6,r6,0x1f |
1860 | b 92f | |
b5bbeb23 | 1861 | 91: mfspr r6,SPRN_PIR |
14cf11af PM |
1862 | andi. r6,r6,0x3ff |
1863 | 92: sldi r4,r24,3 | |
1864 | stwx r6,r5,r4 | |
1865 | bl .hmt_start_secondary | |
1866 | b 101f | |
1867 | ||
1868 | __hmt_secondary_hold: | |
1869 | LOADADDR(r5, hmt_thread_data) | |
1870 | clrldi r5,r5,4 | |
1871 | li r7,0 | |
b5bbeb23 PM |
1872 | mfspr r6,SPRN_PIR |
1873 | mfspr r8,SPRN_PVR | |
14cf11af PM |
1874 | srwi r8,r8,16 |
1875 | cmpwi r8,0x34 | |
1876 | bne 93f | |
1877 | andi. r6,r6,0x1f | |
1878 | b 103f | |
1879 | 93: andi. r6,r6,0x3f | |
1880 | ||
1881 | 103: lwzx r8,r5,r7 | |
1882 | cmpw r8,r6 | |
1883 | beq 104f | |
1884 | addi r7,r7,8 | |
1885 | b 103b | |
1886 | ||
1887 | 104: addi r7,r7,4 | |
1888 | lwzx r9,r5,r7 | |
1889 | mr r24,r9 | |
1890 | 101: | |
1891 | #endif | |
1892 | mr r3,r24 | |
1893 | b .pSeries_secondary_smp_init | |
1894 | ||
1895 | #ifdef CONFIG_HMT | |
1896 | _GLOBAL(hmt_start_secondary) | |
1897 | LOADADDR(r4,__hmt_secondary_hold) | |
1898 | clrldi r4,r4,4 | |
b5bbeb23 PM |
1899 | mtspr SPRN_NIADORM, r4 |
1900 | mfspr r4, SPRN_MSRDORM | |
14cf11af PM |
1901 | li r5, -65 |
1902 | and r4, r4, r5 | |
b5bbeb23 | 1903 | mtspr SPRN_MSRDORM, r4 |
14cf11af PM |
1904 | lis r4,0xffef |
1905 | ori r4,r4,0x7403 | |
b5bbeb23 | 1906 | mtspr SPRN_TSC, r4 |
14cf11af | 1907 | li r4,0x1f4 |
b5bbeb23 PM |
1908 | mtspr SPRN_TST, r4 |
1909 | mfspr r4, SPRN_HID0 | |
14cf11af | 1910 | ori r4, r4, 0x1 |
b5bbeb23 | 1911 | mtspr SPRN_HID0, r4 |
14cf11af PM |
1912 | mfspr r4, SPRN_CTRLF |
1913 | oris r4, r4, 0x40 | |
1914 | mtspr SPRN_CTRLT, r4 | |
1915 | blr | |
1916 | #endif | |
1917 | ||
ee400b63 | 1918 | #if defined(CONFIG_KEXEC) || defined(CONFIG_SMP) |
14cf11af PM |
1919 | _GLOBAL(smp_release_cpus) |
1920 | /* All secondary cpus are spinning on a common | |
1921 | * spinloop, release them all now so they can start | |
1922 | * to spin on their individual paca spinloops. | |
1923 | * For non SMP kernels, the secondary cpus never | |
1924 | * get out of the common spinloop. | |
ee400b63 SR |
1925 | * XXX This does nothing useful on iSeries, secondaries are |
1926 | * already waiting on their paca. | |
14cf11af PM |
1927 | */ |
1928 | li r3,1 | |
1929 | LOADADDR(r5,__secondary_hold_spinloop) | |
1930 | std r3,0(r5) | |
1931 | sync | |
1932 | blr | |
ee400b63 | 1933 | #endif /* CONFIG_SMP */ |
14cf11af PM |
1934 | |
1935 | ||
1936 | /* | |
1937 | * We put a few things here that have to be page-aligned. | |
1938 | * This stuff goes at the beginning of the bss, which is page-aligned. | |
1939 | */ | |
1940 | .section ".bss" | |
1941 | ||
1942 | .align PAGE_SHIFT | |
1943 | ||
1944 | .globl empty_zero_page | |
1945 | empty_zero_page: | |
1946 | .space PAGE_SIZE | |
1947 | ||
1948 | .globl swapper_pg_dir | |
1949 | swapper_pg_dir: | |
1950 | .space PAGE_SIZE | |
1951 | ||
1952 | /* | |
1953 | * This space gets a copy of optional info passed to us by the bootstrap | |
1954 | * Used to pass parameters into the kernel like root=/dev/sda1, etc. | |
1955 | */ | |
1956 | .globl cmd_line | |
1957 | cmd_line: | |
1958 | .space COMMAND_LINE_SIZE |