[linux-2.6-block.git] / arch / powerpc / boot / dts / sbc8548.dts

/*
 * SBC8548 Device Tree Source
 *
 * Copyright 2007 Wind River Systems Inc.
 *
 * Paul Gortmaker (see MAINTAINERS for contact information)
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */


/dts-v1/;

/ {
	model = "SBC8548";
	compatible = "SBC8548";
	#address-cells = <1>;
	#size-cells = <1>;

	aliases {
		ethernet0 = &enet0;
		ethernet1 = &enet1;
		serial0 = &serial0;
		serial1 = &serial1;
		pci0 = &pci0;
		/* pci1 doesn't have a corresponding physical connector */
		pci2 = &pci2;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		PowerPC,8548@0 {
			device_type = "cpu";
			reg = <0>;
			d-cache-line-size = <0x20>;	// 32 bytes
			i-cache-line-size = <0x20>;	// 32 bytes
			d-cache-size = <0x8000>;	// L1, 32K
			i-cache-size = <0x8000>;	// L1, 32K
			timebase-frequency = <0>;	// From uboot
			bus-frequency = <0>;
			clock-frequency = <0>;
			next-level-cache = <&L2>;
		};
	};

	memory {
		device_type = "memory";
		reg = <0x00000000 0x10000000>;
	};

	localbus@e0000000 {
		#address-cells = <2>;
		#size-cells = <1>;
		compatible = "simple-bus";
		reg = <0xe0000000 0x5000>;
		interrupt-parent = <&mpic>;

		ranges = <0x0 0x0 0xff800000 0x00800000		/*8MB Flash*/
			  0x3 0x0 0xf0000000 0x04000000		/*64MB SDRAM*/
			  0x4 0x0 0xf4000000 0x04000000 	/*64MB SDRAM*/
			  0x5 0x0 0xf8000000 0x00b10000		/* EPLD */
			  0x6 0x0 0xfb800000 0x04000000>;	/*64MB Flash*/


		flash@0,0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "cfi-flash";
			reg = <0x0 0x0 0x800000>;
			bank-width = <1>;
			device-width = <1>;
			partition@0x0 {
				label = "space";
				reg = <0x00000000 0x00100000>;
			};
			partition@0x100000 {
				label = "bootloader";
				reg = <0x00100000 0x00700000>;
				read-only;
			};
		};

		epld@5,0 {
			compatible = "wrs,epld-localbus";
			#address-cells = <2>;
			#size-cells = <1>;
			reg = <0x5 0x0 0x00b10000>;
			ranges = <
				0x0 0x0 0x5 0x000000 0x1fff	/* LED */
				0x1 0x0 0x5 0x100000 0x1fff	/* Switches */
				0x3 0x0 0x5 0x300000 0x1fff	/* HW Rev. */
				0xb 0x0	0x5 0xb00000 0x1fff	/* EEPROM */
			>;

			led@0,0 {
				compatible = "led";
				reg = <0x0 0x0 0x1fff>;
			};

			switches@1,0 {
				compatible = "switches";
				reg = <0x1 0x0 0x1fff>;
			};

			hw-rev@3,0 {
				compatible = "hw-rev";
				reg = <0x3 0x0 0x1fff>;
			};

			eeprom@b,0 {
				compatible = "eeprom";
				reg = <0xb 0 0x1fff>;
			};

		};

		alt-flash@6,0 {
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x6 0x0 0x04000000>;
			compatible = "cfi-flash";
			bank-width = <4>;
			device-width = <1>;
			partition@0x0 {
				label = "bootloader";
				reg = <0x00000000 0x00100000>;
				read-only;
			};
			partition@0x00100000 {
				label = "file-system";
				reg = <0x00100000 0x01f00000>;
			};
			partition@0x02000000 {
				label = "boot-config";
				reg = <0x02000000 0x00100000>;
			};
			partition@0x02100000 {
				label = "space";
				reg = <0x02100000 0x01f00000>;
			};
                };
        };

	soc8548@e0000000 {
		#address-cells = <1>;
		#size-cells = <1>;
		device_type = "soc";
		ranges = <0x00000000 0xe0000000 0x00100000>;
		reg = <0xe0000000 0x00001000>;	// CCSRBAR
		bus-frequency = <0>;
		compatible = "simple-bus";

		memory-controller@2000 {
			compatible = "fsl,8548-memory-controller";
			reg = <0x2000 0x1000>;
			interrupt-parent = <&mpic>;
			interrupts = <0x12 0x2>;
		};

		L2: l2-cache-controller@20000 {
			compatible = "fsl,8548-l2-cache-controller";
			reg = <0x20000 0x1000>;
			cache-line-size = <0x20>;	// 32 bytes
			cache-size = <0x80000>;	// L2, 512K
			interrupt-parent = <&mpic>;
			interrupts = <0x10 0x2>;
		};

		i2c@3000 {
			#address-cells = <1>;
			#size-cells = <0>;
			cell-index = <0>;
			compatible = "fsl-i2c";
			reg = <0x3000 0x100>;
			interrupts = <0x2b 0x2>;
			interrupt-parent = <&mpic>;
			dfsrr;
		};

		i2c@3100 {
			#address-cells = <1>;
			#size-cells = <0>;
			cell-index = <1>;
			compatible = "fsl-i2c";
			reg = <0x3100 0x100>;
			interrupts = <0x2b 0x2>;
			interrupt-parent = <&mpic>;
			dfsrr;
		};

		mdio@24520 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "fsl,gianfar-mdio";
			reg = <0x24520 0x20>;

			phy0: ethernet-phy@19 {
				interrupt-parent = <&mpic>;
				interrupts = <0x6 0x1>;
				reg = <0x19>;
				device_type = "ethernet-phy";
			};
			phy1: ethernet-phy@1a {
				interrupt-parent = <&mpic>;
				interrupts = <0x7 0x1>;
				reg = <0x1a>;
				device_type = "ethernet-phy";
			};
		};

		enet0: ethernet@24000 {
			cell-index = <0>;
			device_type = "network";
			model = "eTSEC";
			compatible = "gianfar";
			reg = <0x24000 0x1000>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
			interrupt-parent = <&mpic>;
			phy-handle = <&phy0>;
		};

		enet1: ethernet@25000 {
			cell-index = <1>;
			device_type = "network";
			model = "eTSEC";
			compatible = "gianfar";
			reg = <0x25000 0x1000>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
			interrupt-parent = <&mpic>;
			phy-handle = <&phy1>;
		};

		serial0: serial@4500 {
			cell-index = <0>;
			device_type = "serial";
			compatible = "ns16550";
			reg = <0x4500 0x100>;	// reg base, size
			clock-frequency = <0>;	// should we fill in in uboot?
			interrupts = <0x2a 0x2>;
			interrupt-parent = <&mpic>;
		};

		serial1: serial@4600 {
			cell-index = <1>;
			device_type = "serial";
			compatible = "ns16550";
			reg = <0x4600 0x100>;	// reg base, size
			clock-frequency = <0>;	// should we fill in in uboot?
			interrupts = <0x2a 0x2>;
			interrupt-parent = <&mpic>;
		};

		global-utilities@e0000 {	//global utilities reg
			compatible = "fsl,mpc8548-guts";
			reg = <0xe0000 0x1000>;
			fsl,has-rstcr;
		};

		mpic: pic@40000 {
			interrupt-controller;
			#address-cells = <0>;
			#interrupt-cells = <2>;
			reg = <0x40000 0x40000>;
			compatible = "chrp,open-pic";
			device_type = "open-pic";
		};
	};

	pci0: pci@e0008000 {
		cell-index = <0>;
		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
		interrupt-map = <
			/* IDSEL 0x01 (PCI-X slot) @66MHz */
			0x0800 0x0 0x0 0x1 &mpic 0x2 0x1
			0x0800 0x0 0x0 0x2 &mpic 0x3 0x1
			0x0800 0x0 0x0 0x3 &mpic 0x4 0x1
			0x0800 0x0 0x0 0x4 &mpic 0x1 0x1

			/* IDSEL 0x11 (PCI, 3.3V 32bit) @33MHz */
			0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
			0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
			0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
			0x8800 0x0 0x0 0x4 &mpic 0x1 0x1>;

		interrupt-parent = <&mpic>;
		interrupts = <0x18 0x2>;
		bus-range = <0 0>;
		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000
			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00800000>;
		clock-frequency = <66666666>;
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		reg = <0xe0008000 0x1000>;
		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
		device_type = "pci";
	};

	pci2: pcie@e000a000 {
		cell-index = <2>;
		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
		interrupt-map = <

			/* IDSEL 0x0 (PEX) */
			0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
			0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
			0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
			0x0000 0x0 0x0 0x4 &mpic 0x3 0x1>;

		interrupt-parent = <&mpic>;
		interrupts = <0x1a 0x2>;
		bus-range = <0x0 0xff>;
		ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
			  0x01000000 0x0 0x00000000 0xe3000000 0x0 0x08000000>;
		clock-frequency = <33333333>;
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		reg = <0xe000a000 0x1000>;
		compatible = "fsl,mpc8548-pcie";
		device_type = "pci";
		pcie@0 {
			reg = <0x0 0x0 0x0 0x0 0x0>;
			#size-cells = <2>;
			#address-cells = <3>;
			device_type = "pci";
			ranges = <0x02000000 0x0 0xa0000000
				  0x02000000 0x0 0xa0000000
				  0x0 0x20000000

				  0x01000000 0x0 0x00000000
				  0x01000000 0x0 0x00000000
				  0x0 0x08000000>;
		};
	};
};
Commit	Line	Data
30340998 PG	1	/*
	2	* SBC8548 Device Tree Source
	3	*
	4	* Copyright 2007 Wind River Systems Inc.
	5	*
	6	* Paul Gortmaker (see MAINTAINERS for contact information)
	7	*
	8	* This program is free software; you can redistribute it and/or modify it
	9	* under the terms of the GNU General Public License as published by the
	10	* Free Software Foundation; either version 2 of the License, or (at your
	11	* option) any later version.
	12	*/
	13
	14
	15	/dts-v1/;
	16
	17	/ {
	18	model = "SBC8548";
	19	compatible = "SBC8548";
	20	#address-cells = <1>;
	21	#size-cells = <1>;
	22
	23	aliases {
	24	ethernet0 = &enet0;
	25	ethernet1 = &enet1;
	26	serial0 = &serial0;
	27	serial1 = &serial1;
	28	pci0 = &pci0;
	29	/* pci1 doesn't have a corresponding physical connector */
	30	pci2 = &pci2;
	31	};
	32
	33	cpus {
	34	#address-cells = <1>;
	35	#size-cells = <0>;
	36
	37	PowerPC,8548@0 {
	38	device_type = "cpu";
	39	reg = <0>;
	40	d-cache-line-size = <0x20>; // 32 bytes
	41	i-cache-line-size = <0x20>; // 32 bytes
	42	d-cache-size = <0x8000>; // L1, 32K
	43	i-cache-size = <0x8000>; // L1, 32K
	44	timebase-frequency = <0>; // From uboot
	45	bus-frequency = <0>;
	46	clock-frequency = <0>;
c054065b	47	next-level-cache = <&L2>;
30340998 PG	48	};
	49	};
	50
	51	memory {
	52	device_type = "memory";
	53	reg = <0x00000000 0x10000000>;
	54	};
	55
bfd123bf JM	56	localbus@e0000000 {
	57	#address-cells = <2>;
	58	#size-cells = <1>;
	59	compatible = "simple-bus";
	60	reg = <0xe0000000 0x5000>;
	61	interrupt-parent = <&mpic>;
	62
	63	ranges = <0x0 0x0 0xff800000 0x00800000 /8MB Flash/
	64	0x3 0x0 0xf0000000 0x04000000 /64MB SDRAM/
	65	0x4 0x0 0xf4000000 0x04000000 /64MB SDRAM/
	66	0x5 0x0 0xf8000000 0x00b10000 /* EPLD */
	67	0x6 0x0 0xfb800000 0x04000000>; /64MB Flash/
	68
	69
	70	flash@0,0 {
	71	#address-cells = <1>;
	72	#size-cells = <1>;
	73	compatible = "cfi-flash";
	74	reg = <0x0 0x0 0x800000>;
	75	bank-width = <1>;
	76	device-width = <1>;
	77	partition@0x0 {
	78	label = "space";
	79	reg = <0x00000000 0x00100000>;
	80	};
	81	partition@0x100000 {
	82	label = "bootloader";
	83	reg = <0x00100000 0x00700000>;
	84	read-only;
	85	};
	86	};
	87
	88	epld@5,0 {
	89	compatible = "wrs,epld-localbus";
	90	#address-cells = <2>;
	91	#size-cells = <1>;
	92	reg = <0x5 0x0 0x00b10000>;
	93	ranges = <
	94	0x0 0x0 0x5 0x000000 0x1fff /* LED */
	95	0x1 0x0 0x5 0x100000 0x1fff /* Switches */
	96	0x3 0x0 0x5 0x300000 0x1fff /* HW Rev. */
	97	0xb 0x0 0x5 0xb00000 0x1fff /* EEPROM */
	98	>;
	99
	100	led@0,0 {
	101	compatible = "led";
	102	reg = <0x0 0x0 0x1fff>;
	103	};
	104
	105	switches@1,0 {
	106	compatible = "switches";
	107	reg = <0x1 0x0 0x1fff>;
	108	};
	109
	110	hw-rev@3,0 {
	111	compatible = "hw-rev";
	112	reg = <0x3 0x0 0x1fff>;
	113	};
	114
	115	eeprom@b,0 {
	116	compatible = "eeprom";
	117	reg = <0xb 0 0x1fff>;
	118	};
	119
120	};
121
122	alt-flash@6,0 {
123	#address-cells = <1>;
124	#size-cells = <1>;
125	reg = <0x6 0x0 0x04000000>;
126	compatible = "cfi-flash";
127	bank-width = <4>;
128	device-width = <1>;
129	partition@0x0 {
130	label = "bootloader";
131	reg = <0x00000000 0x00100000>;
132	read-only;
133	};
134	partition@0x00100000 {
135	label = "file-system";
136	reg = <0x00100000 0x01f00000>;
137	};
138	partition@0x02000000 {
139	label = "boot-config";
140	reg = <0x02000000 0x00100000>;
141	};
142	partition@0x02100000 {
143	label = "space";
144	reg = <0x02100000 0x01f00000>;
145	};
146	};
147	};
148
30340998 PG	149	soc8548@e0000000 {
	150	#address-cells = <1>;
	151	#size-cells = <1>;
	152	device_type = "soc";
	153	ranges = <0x00000000 0xe0000000 0x00100000>;
	154	reg = <0xe0000000 0x00001000>; // CCSRBAR
	155	bus-frequency = <0>;
bfd123bf	156	compatible = "simple-bus";
30340998 PG	157
	158	memory-controller@2000 {
	159	compatible = "fsl,8548-memory-controller";
	160	reg = <0x2000 0x1000>;
	161	interrupt-parent = <&mpic>;
	162	interrupts = <0x12 0x2>;
	163	};
	164
c054065b	165	L2: l2-cache-controller@20000 {
30340998 PG	166	compatible = "fsl,8548-l2-cache-controller";
	167	reg = <0x20000 0x1000>;
	168	cache-line-size = <0x20>; // 32 bytes
	169	cache-size = <0x80000>; // L2, 512K
	170	interrupt-parent = <&mpic>;
	171	interrupts = <0x10 0x2>;
	172	};
	173
	174	i2c@3000 {
	175	#address-cells = <1>;
	176	#size-cells = <0>;
	177	cell-index = <0>;
	178	compatible = "fsl-i2c";
	179	reg = <0x3000 0x100>;
	180	interrupts = <0x2b 0x2>;
	181	interrupt-parent = <&mpic>;
	182	dfsrr;
	183	};
	184
	185	i2c@3100 {
	186	#address-cells = <1>;
	187	#size-cells = <0>;
	188	cell-index = <1>;
	189	compatible = "fsl-i2c";
	190	reg = <0x3100 0x100>;
	191	interrupts = <0x2b 0x2>;
	192	interrupt-parent = <&mpic>;
	193	dfsrr;
	194	};
	195
	196	mdio@24520 {
	197	#address-cells = <1>;
	198	#size-cells = <0>;
	199	compatible = "fsl,gianfar-mdio";
	200	reg = <0x24520 0x20>;
	201
	202	phy0: ethernet-phy@19 {
	203	interrupt-parent = <&mpic>;
	204	interrupts = <0x6 0x1>;
	205	reg = <0x19>;
	206	device_type = "ethernet-phy";
	207	};
	208	phy1: ethernet-phy@1a {
	209	interrupt-parent = <&mpic>;
	210	interrupts = <0x7 0x1>;
	211	reg = <0x1a>;
	212	device_type = "ethernet-phy";
	213	};
	214	};
	215
	216	enet0: ethernet@24000 {
	217	cell-index = <0>;
	218	device_type = "network";
	219	model = "eTSEC";
	220	compatible = "gianfar";
	221	reg = <0x24000 0x1000>;
	222	local-mac-address = [ 00 00 00 00 00 00 ];
	223	interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
	224	interrupt-parent = <&mpic>;
	225	phy-handle = <&phy0>;
	226	};
	227
	228	enet1: ethernet@25000 {
	229	cell-index = <1>;
230	device_type = "network";
231	model = "eTSEC";
232	compatible = "gianfar";
233	reg = <0x25000 0x1000>;
234	local-mac-address = [ 00 00 00 00 00 00 ];
235	interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
236	interrupt-parent = <&mpic>;
237	phy-handle = <&phy1>;
238	};
239
240	serial0: serial@4500 {
241	cell-index = <0>;
242	device_type = "serial";
243	compatible = "ns16550";
244	reg = <0x4500 0x100>; // reg base, size
245	clock-frequency = <0>; // should we fill in in uboot?
246	interrupts = <0x2a 0x2>;
247	interrupt-parent = <&mpic>;
248	};
249
250	serial1: serial@4600 {
251	cell-index = <1>;
252	device_type = "serial";
253	compatible = "ns16550";
254	reg = <0x4600 0x100>; // reg base, size
255	clock-frequency = <0>; // should we fill in in uboot?
256	interrupts = <0x2a 0x2>;
257	interrupt-parent = <&mpic>;
258	};
259
260	global-utilities@e0000 { //global utilities reg
261	compatible = "fsl,mpc8548-guts";
262	reg = <0xe0000 0x1000>;
263	fsl,has-rstcr;
264	};
265
266	mpic: pic@40000 {
267	interrupt-controller;
268	#address-cells = <0>;
30340998 PG	269	#interrupt-cells = <2>;
	270	reg = <0x40000 0x40000>;
	271	compatible = "chrp,open-pic";
	272	device_type = "open-pic";
30340998 PG	273	};
	274	};
	275
	276	pci0: pci@e0008000 {
	277	cell-index = <0>;
	278	interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
	279	interrupt-map = <
3e0d65bf JM	280	/* IDSEL 0x01 (PCI-X slot) @66MHz */
	281	0x0800 0x0 0x0 0x1 &mpic 0x2 0x1
	282	0x0800 0x0 0x0 0x2 &mpic 0x3 0x1
	283	0x0800 0x0 0x0 0x3 &mpic 0x4 0x1
	284	0x0800 0x0 0x0 0x4 &mpic 0x1 0x1
	285
	286	/* IDSEL 0x11 (PCI, 3.3V 32bit) @33MHz */
	287	0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
	288	0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
	289	0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
	290	0x8800 0x0 0x0 0x4 &mpic 0x1 0x1>;
30340998 PG	291
	292	interrupt-parent = <&mpic>;
	293	interrupts = <0x18 0x2>;
	294	bus-range = <0 0>;
	295	ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000
	296	0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00800000>;
	297	clock-frequency = <66666666>;
	298	#interrupt-cells = <1>;
	299	#size-cells = <2>;
	300	#address-cells = <3>;
	301	reg = <0xe0008000 0x1000>;
	302	compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
	303	device_type = "pci";
	304	};
	305
	306	pci2: pcie@e000a000 {
	307	cell-index = <2>;
	308	interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
	309	interrupt-map = <
	310
	311	/* IDSEL 0x0 (PEX) */
	312	0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
	313	0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
	314	0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
	315	0x0000 0x0 0x0 0x4 &mpic 0x3 0x1>;
	316
	317	interrupt-parent = <&mpic>;
	318	interrupts = <0x1a 0x2>;
	319	bus-range = <0x0 0xff>;
	320	ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
	321	0x01000000 0x0 0x00000000 0xe3000000 0x0 0x08000000>;
	322	clock-frequency = <33333333>;
	323	#interrupt-cells = <1>;
	324	#size-cells = <2>;
	325	#address-cells = <3>;
	326	reg = <0xe000a000 0x1000>;
	327	compatible = "fsl,mpc8548-pcie";
	328	device_type = "pci";
	329	pcie@0 {
	330	reg = <0x0 0x0 0x0 0x0 0x0>;
	331	#size-cells = <2>;
	332	#address-cells = <3>;
	333	device_type = "pci";
	334	ranges = <0x02000000 0x0 0xa0000000
	335	0x02000000 0x0 0xa0000000
	336	0x0 0x20000000
	337
	338	0x01000000 0x0 0x00000000
	339	0x01000000 0x0 0x00000000
	340	0x0 0x08000000>;
	341	};
	342	};
	343	};