Commit | Line | Data |
---|---|---|
4a170d01 TT |
1 | /* |
2 | * P1022 DS Device Tree Source stub (no addresses or top-level ranges) | |
3 | * | |
4 | * Copyright 2012 Freescale Semiconductor Inc. | |
5 | * | |
6 | * Redistribution and use in source and binary forms, with or without | |
7 | * modification, are permitted provided that the following conditions are met: | |
8 | * * Redistributions of source code must retain the above copyright | |
9 | * notice, this list of conditions and the following disclaimer. | |
10 | * * Redistributions in binary form must reproduce the above copyright | |
11 | * notice, this list of conditions and the following disclaimer in the | |
12 | * documentation and/or other materials provided with the distribution. | |
13 | * * Neither the name of Freescale Semiconductor nor the | |
14 | * names of its contributors may be used to endorse or promote products | |
15 | * derived from this software without specific prior written permission. | |
16 | * | |
17 | * | |
18 | * ALTERNATIVELY, this software may be distributed under the terms of the | |
19 | * GNU General Public License ("GPL") as published by the Free Software | |
20 | * Foundation, either version 2 of that License or (at your option) any | |
21 | * later version. | |
22 | * | |
23 | * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY | |
24 | * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED | |
25 | * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
26 | * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY | |
27 | * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES | |
28 | * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; | |
29 | * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND | |
30 | * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
31 | * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS | |
32 | * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
33 | */ | |
34 | ||
35 | &board_lbc { | |
4a170d01 TT |
36 | nor@0,0 { |
37 | #address-cells = <1>; | |
38 | #size-cells = <1>; | |
39 | compatible = "cfi-flash"; | |
40 | reg = <0x0 0x0 0x8000000>; | |
41 | bank-width = <2>; | |
42 | device-width = <1>; | |
43 | ||
44 | partition@0 { | |
45 | reg = <0x0 0x03000000>; | |
46 | label = "ramdisk-nor"; | |
47 | read-only; | |
48 | }; | |
49 | ||
50 | partition@3000000 { | |
51 | reg = <0x03000000 0x00e00000>; | |
52 | label = "diagnostic-nor"; | |
53 | read-only; | |
54 | }; | |
55 | ||
56 | partition@3e00000 { | |
57 | reg = <0x03e00000 0x00200000>; | |
58 | label = "dink-nor"; | |
59 | read-only; | |
60 | }; | |
61 | ||
62 | partition@4000000 { | |
63 | reg = <0x04000000 0x00400000>; | |
64 | label = "kernel-nor"; | |
65 | read-only; | |
66 | }; | |
67 | ||
68 | partition@4400000 { | |
69 | reg = <0x04400000 0x03b00000>; | |
70 | label = "jffs2-nor"; | |
71 | }; | |
72 | ||
73 | partition@7f00000 { | |
74 | reg = <0x07f00000 0x00080000>; | |
75 | label = "dtb-nor"; | |
76 | read-only; | |
77 | }; | |
78 | ||
79 | partition@7f80000 { | |
80 | reg = <0x07f80000 0x00080000>; | |
81 | label = "u-boot-nor"; | |
82 | read-only; | |
83 | }; | |
84 | }; | |
85 | ||
86 | nand@2,0 { | |
87 | #address-cells = <1>; | |
88 | #size-cells = <1>; | |
89 | compatible = "fsl,elbc-fcm-nand"; | |
90 | reg = <0x2 0x0 0x40000>; | |
91 | ||
92 | partition@0 { | |
93 | reg = <0x0 0x02000000>; | |
94 | label = "u-boot-nand"; | |
95 | read-only; | |
96 | }; | |
97 | ||
98 | partition@2000000 { | |
99 | reg = <0x02000000 0x10000000>; | |
100 | label = "jffs2-nand"; | |
101 | }; | |
102 | ||
103 | partition@12000000 { | |
104 | reg = <0x12000000 0x10000000>; | |
105 | label = "ramdisk-nand"; | |
106 | read-only; | |
107 | }; | |
108 | ||
109 | partition@22000000 { | |
110 | reg = <0x22000000 0x04000000>; | |
111 | label = "kernel-nand"; | |
112 | }; | |
113 | ||
114 | partition@26000000 { | |
115 | reg = <0x26000000 0x01000000>; | |
116 | label = "dtb-nand"; | |
117 | read-only; | |
118 | }; | |
119 | ||
120 | partition@27000000 { | |
121 | reg = <0x27000000 0x19000000>; | |
122 | label = "reserved-nand"; | |
123 | }; | |
124 | }; | |
125 | ||
126 | board-control@3,0 { | |
127 | compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis"; | |
128 | reg = <3 0 0x30>; | |
129 | interrupt-parent = <&mpic>; | |
130 | /* | |
131 | * IRQ8 is generated if the "EVENT" switch is pressed | |
132 | * and PX_CTL[EVESEL] is set to 00. | |
133 | */ | |
134 | interrupts = <8 0 0 0>; | |
135 | }; | |
136 | }; | |
137 | ||
138 | &board_soc { | |
139 | i2c@3100 { | |
140 | wm8776:codec@1a { | |
141 | compatible = "wlf,wm8776"; | |
142 | reg = <0x1a>; | |
143 | /* | |
144 | * clock-frequency will be set by U-Boot if | |
145 | * the clock is enabled. | |
146 | */ | |
147 | }; | |
4a352433 | 148 | rtc@68 { |
1e7bf895 | 149 | compatible = "dallas,ds3232"; |
4a352433 | 150 | reg = <0x68>; |
7f83a50c | 151 | interrupts = <0x1 0x1 0 0>; |
4a352433 | 152 | }; |
17ae4f0a JH |
153 | adt7461@4c { |
154 | compatible = "adi,adt7461"; | |
155 | reg = <0x4c>; | |
156 | }; | |
4a170d01 TT |
157 | }; |
158 | ||
159 | spi@7000 { | |
160 | flash@0 { | |
161 | #address-cells = <1>; | |
162 | #size-cells = <1>; | |
163 | compatible = "spansion,s25sl12801"; | |
164 | reg = <0>; | |
165 | spi-max-frequency = <40000000>; /* input clock */ | |
166 | ||
167 | partition@0 { | |
168 | label = "u-boot-spi"; | |
169 | reg = <0x00000000 0x00100000>; | |
170 | read-only; | |
171 | }; | |
172 | partition@100000 { | |
173 | label = "kernel-spi"; | |
174 | reg = <0x00100000 0x00500000>; | |
175 | read-only; | |
176 | }; | |
177 | partition@600000 { | |
178 | label = "dtb-spi"; | |
179 | reg = <0x00600000 0x00100000>; | |
180 | read-only; | |
181 | }; | |
182 | partition@700000 { | |
183 | label = "file system-spi"; | |
184 | reg = <0x00700000 0x00900000>; | |
185 | }; | |
186 | }; | |
187 | }; | |
188 | ||
189 | ssi@15000 { | |
190 | fsl,mode = "i2s-slave"; | |
191 | codec-handle = <&wm8776>; | |
192 | fsl,ssi-asynchronous; | |
193 | }; | |
194 | ||
195 | usb@22000 { | |
196 | phy_type = "ulpi"; | |
197 | }; | |
198 | ||
199 | usb@23000 { | |
200 | status = "disabled"; | |
201 | }; | |
202 | ||
203 | mdio@24000 { | |
204 | phy0: ethernet-phy@0 { | |
205 | interrupts = <3 1 0 0>; | |
206 | reg = <0x1>; | |
207 | }; | |
208 | phy1: ethernet-phy@1 { | |
209 | interrupts = <9 1 0 0>; | |
210 | reg = <0x2>; | |
211 | }; | |
212 | tbi-phy@2 { | |
213 | device_type = "tbi-phy"; | |
214 | reg = <0x2>; | |
215 | }; | |
216 | }; | |
217 | ||
218 | ethernet@b0000 { | |
219 | phy-handle = <&phy0>; | |
220 | phy-connection-type = "rgmii-id"; | |
221 | }; | |
222 | ||
223 | ethernet@b1000 { | |
224 | phy-handle = <&phy1>; | |
225 | phy-connection-type = "rgmii-id"; | |
226 | }; | |
227 | }; |