[linux-2.6-block.git] / arch / powerpc / boot / dts / bsc9131rdb.dtsi

/*
 * BSC9131 RDB Device Tree Source stub (no addresses or top-level ranges)
 *
 * Copyright 2011-2012 Freescale Semiconductor Inc.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in the
 *       documentation and/or other materials provided with the distribution.
 *     * Neither the name of Freescale Semiconductor nor the
 *       names of its contributors may be used to endorse or promote products
 *       derived from this software without specific prior written permission.
 *
 *
 * ALTERNATIVELY, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") as published by the Free Software
 * Foundation, either version 2 of that License or (at your option) any
 * later version.
 *
 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

&board_ifc {

	nand@0,0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "fsl,ifc-nand";
		reg = <0x0 0x0 0x4000>;

		partition@0 {
			/* This location must not be altered  */
			/* 3MB for u-boot Bootloader Image */
			reg = <0x0 0x00300000>;
			label = "NAND U-Boot Image";
			read-only;
		};

		partition@300000 {
			/* 1MB for DTB Image */
			reg = <0x00300000 0x00100000>;
			label = "NAND DTB Image";
		};

		partition@400000 {
			/* 8MB for Linux Kernel Image */
			reg = <0x00400000 0x00800000>;
			label = "NAND Linux Kernel Image";
		};

		partition@c00000 {
			/* Rest space for Root file System Image */
			reg = <0x00c00000 0x07400000>;
			label = "NAND RFS Image";
		};
	};
};

&board_soc {
	/* BSC9131RDB does not have any device on i2c@3100 */
	i2c@3100 {
		status = "disabled";
	};

	spi@7000 {
		flash@0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "spansion,s25sl12801";
			reg = <0>;
			spi-max-frequency = <50000000>;

			/* 512KB for u-boot Bootloader Image */
			partition@0 {
				reg = <0x0 0x00080000>;
				label = "SPI Flash U-Boot Image";
				read-only;
			};

			/* 512KB for DTB Image */
			partition@80000 {
				reg = <0x00080000 0x00080000>;
				label = "SPI Flash DTB Image";
			};

			/* 4MB for Linux Kernel Image */
			partition@100000 {
				reg = <0x00100000 0x00400000>;
				label = "SPI Flash Kernel Image";
			};

			/*11MB for RFS Image */
			partition@500000 {
				reg = <0x00500000 0x00B00000>;
				label = "SPI Flash RFS Image";
			};

		};
	};

	usb@22000 {
		phy_type = "ulpi";
	};

	mdio@24000 {
		phy0: ethernet-phy@0 {
			interrupts = <3 1 0 0>;
			reg = <0x0>;
		};

		phy1: ethernet-phy@1 {
			interrupts = <2 1 0 0>;
			reg = <0x3>;
		};
	};

	sdhc@2e000 {
		status = "disabled";
	};

	enet0: ethernet@b0000 {
		phy-handle = <&phy0>;
		phy-connection-type = "rgmii-id";
	};

	enet1: ethernet@b1000 {
		phy-handle = <&phy1>;
		phy-connection-type = "rgmii-id";
	};
};
Commit	Line	Data
d729b900 PK	1	/*
	2	* BSC9131 RDB Device Tree Source stub (no addresses or top-level ranges)
	3	*
	4	* Copyright 2011-2012 Freescale Semiconductor Inc.
	5	*
	6	* Redistribution and use in source and binary forms, with or without
	7	* modification, are permitted provided that the following conditions are met:
	8	* * Redistributions of source code must retain the above copyright
	9	* notice, this list of conditions and the following disclaimer.
	10	* * Redistributions in binary form must reproduce the above copyright
	11	* notice, this list of conditions and the following disclaimer in the
	12	* documentation and/or other materials provided with the distribution.
	13	* * Neither the name of Freescale Semiconductor nor the
	14	* names of its contributors may be used to endorse or promote products
	15	* derived from this software without specific prior written permission.
	16	*
	17	*
	18	* ALTERNATIVELY, this software may be distributed under the terms of the
	19	* GNU General Public License ("GPL") as published by the Free Software
	20	* Foundation, either version 2 of that License or (at your option) any
	21	* later version.
	22	*
	23	* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
	24	* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
	25	* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
	26	* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
	27	* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
	28	* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
	29	* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
	30	* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	31	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
	32	* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	33	*/
	34
	35	&board_ifc {
	36
	37	nand@0,0 {
	38	#address-cells = <1>;
	39	#size-cells = <1>;
	40	compatible = "fsl,ifc-nand";
	41	reg = <0x0 0x0 0x4000>;
	42
	43	partition@0 {
	44	/* This location must not be altered */
	45	/* 3MB for u-boot Bootloader Image */
	46	reg = <0x0 0x00300000>;
	47	label = "NAND U-Boot Image";
	48	read-only;
	49	};
	50
	51	partition@300000 {
	52	/* 1MB for DTB Image */
	53	reg = <0x00300000 0x00100000>;
	54	label = "NAND DTB Image";
	55	};
	56
	57	partition@400000 {
	58	/* 8MB for Linux Kernel Image */
	59	reg = <0x00400000 0x00800000>;
	60	label = "NAND Linux Kernel Image";
	61	};
	62
	63	partition@c00000 {
	64	/* Rest space for Root file System Image */
65	reg = <0x00c00000 0x07400000>;
66	label = "NAND RFS Image";
67	};
68	};
69	};
70
71	&board_soc {
72	/* BSC9131RDB does not have any device on i2c@3100 */
73	i2c@3100 {
74	status = "disabled";
75	};
76
77	spi@7000 {
78	flash@0 {
79	#address-cells = <1>;
80	#size-cells = <1>;
81	compatible = "spansion,s25sl12801";
82	reg = <0>;
83	spi-max-frequency = <50000000>;
84
85	/* 512KB for u-boot Bootloader Image */
86	partition@0 {
87	reg = <0x0 0x00080000>;
88	label = "SPI Flash U-Boot Image";
89	read-only;
90	};
91
92	/* 512KB for DTB Image */
93	partition@80000 {
94	reg = <0x00080000 0x00080000>;
95	label = "SPI Flash DTB Image";
96	};
97
98	/* 4MB for Linux Kernel Image */
99	partition@100000 {
100	reg = <0x00100000 0x00400000>;
101	label = "SPI Flash Kernel Image";
102	};
103
104	/11MB for RFS Image /
105	partition@500000 {
106	reg = <0x00500000 0x00B00000>;
107	label = "SPI Flash RFS Image";
108	};
109
110	};
111	};
112
113	usb@22000 {
114	phy_type = "ulpi";
115	};
116
117	mdio@24000 {
118	phy0: ethernet-phy@0 {
119	interrupts = <3 1 0 0>;
120	reg = <0x0>;
121	};
122
123	phy1: ethernet-phy@1 {
124	interrupts = <2 1 0 0>;
125	reg = <0x3>;
126	};
127	};
128
1c374741	129	sdhc@2e000 {
d729b900 PK	130	status = "disabled";
	131	};
	132
	133	enet0: ethernet@b0000 {
	134	phy-handle = <&phy0>;
	135	phy-connection-type = "rgmii-id";
	136	};
	137
	138	enet1: ethernet@b1000 {
	139	phy-handle = <&phy1>;
	140	phy-connection-type = "rgmii-id";
	141	};
	142	};