projects / linux-block.git / blame
| Commit | Line | Data |
|---|---|---|
| 59d13f9d BD |
1 | /* |
| 2 | * Analogue & Micro ASP8347 Device Tree Source | |
| 3 | * | |
| 4 | * Copyright 2008 Codehermit | |
| 5 | * | |
| 6 | * This program is free software; you can redistribute it and/or modify it | |
| 7 | * under the terms of the GNU General Public License as published by the | |
| 8 | * Free Software Foundation; either version 2 of the License, or (at your | |
| 9 | * option) any later version. | |
| 10 | */ | |
| 11 | ||
| 12 | /dts-v1/; | |
| 13 | ||
| 14 | / { | |
| 15 | model = "Analogue & Micro ASP8347E"; | |
| 16 | compatible = "analogue-and-micro,asp8347e"; | |
| 17 | #address-cells = <1>; | |
| 18 | #size-cells = <1>; | |
| 19 | ||
| 20 | aliases { | |
| 21 | ethernet0 = &enet0; | |
| 22 | ethernet1 = &enet1; | |
| 23 | serial0 = &serial0; | |
| 24 | serial1 = &serial1; | |
| 25 | }; | |
| 26 | ||
| 27 | cpus { | |
| 28 | #address-cells = <1>; | |
| 29 | #size-cells = <0>; | |
| 30 | ||
| 31 | PowerPC,8347@0 { | |
| 32 | device_type = "cpu"; | |
| 33 | reg = <0x0>; | |
| 34 | d-cache-line-size = <32>; | |
| 35 | i-cache-line-size = <32>; | |
| 36 | d-cache-size = <32768>; | |
| 37 | i-cache-size = <32768>; | |
| 38 | timebase-frequency = <0>; // from bootloader | |
| 39 | bus-frequency = <0>; // from bootloader | |
| 40 | clock-frequency = <0>; // from bootloader | |
| 41 | }; | |
| 42 | }; | |
| 43 | ||
| 44 | memory { | |
| 45 | device_type = "memory"; | |
| 46 | reg = <0x00000000 0x8000000>; // 128MB at 0 | |
| 47 | }; | |
| 48 | ||
| 49 | localbus@ff005000 { | |
| 50 | #address-cells = <2>; | |
| 51 | #size-cells = <1>; | |
| 52 | compatible = "fsl,mpc8347e-localbus", | |
| 53 | "fsl,pq2pro-localbus", | |
| 54 | "simple-bus"; | |
| 55 | reg = <0xff005000 0x1000>; | |
| 56 | interrupts = <77 0x8>; | |
| 57 | interrupt-parent = <&ipic>; | |
| 58 | ||
| 59 | ranges = < | |
| 60 | 0 0 0xf0000000 0x02000000 | |
| 61 | >; | |
| 62 | ||
| 63 | flash@0,0 { | |
| 64 | compatible = "cfi-flash"; | |
| 65 | reg = <0 0 0x02000000>; | |
| 66 | bank-width = <2>; | |
| 67 | device-width = <2>; | |
| 68 | }; | |
| 69 | }; | |
| 70 | ||
| 71 | soc8349@ff000000 { | |
| 72 | #address-cells = <1>; | |
| 73 | #size-cells = <1>; | |
| 74 | device_type = "soc"; | |
| 75 | ranges = <0x0 0xff000000 0x00100000>; | |
| 76 | reg = <0xff000000 0x00000200>; | |
| 77 | bus-frequency = <0>; | |
| 78 | ||
| 79 | wdt@200 { | |
| 80 | device_type = "watchdog"; | |
| 81 | compatible = "mpc83xx_wdt"; | |
| 82 | reg = <0x200 0x100>; | |
| 83 | }; | |
| 84 | ||
| 85 | i2c@3000 { | |
| 86 | #address-cells = <1>; | |
| 87 | #size-cells = <0>; | |
| 88 | cell-index = <0>; | |
| 89 | compatible = "fsl-i2c"; | |
| 90 | reg = <0x3000 0x100>; | |
| 91 | interrupts = <14 0x8>; | |
| 92 | interrupt-parent = <&ipic>; | |
| 93 | dfsrr; | |
| 94 | ||
| 95 | rtc@68 { | |
| 96 | compatible = "dallas,ds1374"; | |
| 97 | reg = <0x68>; | |
| 98 | }; | |
| 99 | }; | |
| 100 | ||
| 101 | i2c@3100 { | |
| 102 | #address-cells = <1>; | |
| 103 | #size-cells = <0>; | |
| 104 | cell-index = <1>; | |
| 105 | compatible = "fsl-i2c"; | |
| 106 | reg = <0x3100 0x100>; | |
| 107 | interrupts = <15 0x8>; | |
| 108 | interrupt-parent = <&ipic>; | |
| 109 | dfsrr; | |
| 110 | }; | |
| 111 | ||
| 112 | spi@7000 { | |
| 113 | cell-index = <0>; | |
| 114 | compatible = "fsl,spi"; | |
| 115 | reg = <0x7000 0x1000>; | |
| 116 | interrupts = <16 0x8>; | |
| 117 | interrupt-parent = <&ipic>; | |
| 118 | mode = "cpu"; | |
| 119 | }; | |
| 120 | ||
| dee80553 KG |
121 | dma@82a8 { |
| 122 | #address-cells = <1>; | |
| 123 | #size-cells = <1>; | |
| 124 | compatible = "fsl,mpc8347-dma", "fsl,elo-dma"; | |
| 125 | reg = <0x82a8 4>; | |
| 126 | ranges = <0 0x8100 0x1a8>; | |
| 127 | interrupt-parent = <&ipic>; | |
| 128 | interrupts = <71 8>; | |
| 129 | cell-index = <0>; | |
| 130 | dma-channel@0 { | |
| 131 | compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel"; | |
| 132 | reg = <0 0x80>; | |
| aeb42762 | 133 | cell-index = <0>; |
| dee80553 KG |
134 | interrupt-parent = <&ipic>; |
| 135 | interrupts = <71 8>; | |
| 136 | }; | |
| 137 | dma-channel@80 { | |
| 138 | compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel"; | |
| 139 | reg = <0x80 0x80>; | |
| aeb42762 | 140 | cell-index = <1>; |
| dee80553 KG |
141 | interrupt-parent = <&ipic>; |
| 142 | interrupts = <71 8>; | |
| 143 | }; | |
| 144 | dma-channel@100 { | |
| 145 | compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel"; | |
| 146 | reg = <0x100 0x80>; | |
| aeb42762 | 147 | cell-index = <2>; |
| dee80553 KG |
148 | interrupt-parent = <&ipic>; |
| 149 | interrupts = <71 8>; | |
| 150 | }; | |
| 151 | dma-channel@180 { | |
| 152 | compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel"; | |
| 153 | reg = <0x180 0x28>; | |
| aeb42762 | 154 | cell-index = <3>; |
| dee80553 KG |
155 | interrupt-parent = <&ipic>; |
| 156 | interrupts = <71 8>; | |
| 157 | }; | |
| 158 | }; | |
| 159 | ||
| 59d13f9d BD |
160 | /* phy type (ULPI or SERIAL) are only types supported for MPH */ |
| 161 | /* port = 0 or 1 */ | |
| 162 | usb@22000 { | |
| 163 | compatible = "fsl-usb2-mph"; | |
| 164 | reg = <0x22000 0x1000>; | |
| 165 | #address-cells = <1>; | |
| 166 | #size-cells = <0>; | |
| 167 | interrupt-parent = <&ipic>; | |
| 168 | interrupts = <39 0x8>; | |
| 169 | phy_type = "ulpi"; | |
| 170 | port1; | |
| 171 | }; | |
| 172 | /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ | |
| 173 | usb@23000 { | |
| 174 | compatible = "fsl-usb2-dr"; | |
| 175 | reg = <0x23000 0x1000>; | |
| 176 | #address-cells = <1>; | |
| 177 | #size-cells = <0>; | |
| 178 | interrupt-parent = <&ipic>; | |
| 179 | interrupts = <38 0x8>; | |
| 180 | dr_mode = "otg"; | |
| 181 | phy_type = "ulpi"; | |
| 182 | }; | |
| 183 | ||
| 184 | mdio@24520 { | |
| 185 | #address-cells = <1>; | |
| 186 | #size-cells = <0>; | |
| 187 | compatible = "fsl,gianfar-mdio"; | |
| 188 | reg = <0x24520 0x20>; | |
| 189 | ||
| 190 | phy0: ethernet-phy@0 { | |
| 191 | interrupt-parent = <&ipic>; | |
| 192 | interrupts = <17 0x8>; | |
| 193 | reg = <0x1>; | |
| 194 | device_type = "ethernet-phy"; | |
| 195 | }; | |
| 196 | phy1: ethernet-phy@1 { | |
| 197 | interrupt-parent = <&ipic>; | |
| 198 | interrupts = <18 0x8>; | |
| 199 | reg = <0x2>; | |
| 200 | device_type = "ethernet-phy"; | |
| 201 | }; | |
| b31a1d8b AF |
202 | |
| 203 | tbi0: tbi-phy@11 { | |
| 204 | reg = <0x11>; | |
| 205 | device_type = "tbi-phy"; | |
| 206 | }; | |
| 59d13f9d BD |
207 | }; |
| 208 | ||
| b31a1d8b AF |
209 | mdio@25520 { |
| 210 | #address-cells = <1>; | |
| 211 | #size-cells = <0>; | |
| 212 | compatible = "fsl,gianfar-tbi"; | |
| 213 | reg = <0x25520 0x20>; | |
| 214 | ||
| 215 | tbi1: tbi-phy@11 { | |
| 216 | reg = <0x11>; | |
| 217 | device_type = "tbi-phy"; | |
| 218 | }; | |
| 219 | }; | |
| 220 | ||
| 221 | ||
| 59d13f9d BD |
222 | enet0: ethernet@24000 { |
| 223 | cell-index = <0>; | |
| 224 | device_type = "network"; | |
| 225 | model = "TSEC"; | |
| 226 | compatible = "gianfar"; | |
| 227 | reg = <0x24000 0x1000>; | |
| 228 | local-mac-address = [ 00 08 e5 11 32 33 ]; | |
| 229 | interrupts = <32 0x8 33 0x8 34 0x8>; | |
| 230 | interrupt-parent = <&ipic>; | |
| b31a1d8b | 231 | tbi-handle = <&tbi0>; |
| 59d13f9d BD |
232 | phy-handle = <&phy0>; |
| 233 | linux,network-index = <0>; | |
| 234 | }; | |
| 235 | ||
| 236 | enet1: ethernet@25000 { | |
| 237 | cell-index = <1>; | |
| 238 | device_type = "network"; | |
| 239 | model = "TSEC"; | |
| 240 | compatible = "gianfar"; | |
| 241 | reg = <0x25000 0x1000>; | |
| 242 | local-mac-address = [ 00 08 e5 11 32 34 ]; | |
| 243 | interrupts = <35 0x8 36 0x8 37 0x8>; | |
| 244 | interrupt-parent = <&ipic>; | |
| b31a1d8b | 245 | tbi-handle = <&tbi1>; |
| 59d13f9d BD |
246 | phy-handle = <&phy1>; |
| 247 | linux,network-index = <1>; | |
| 248 | }; | |
| 249 | ||
| 250 | serial0: serial@4500 { | |
| 251 | cell-index = <0>; | |
| 252 | device_type = "serial"; | |
| 253 | compatible = "ns16550"; | |
| 254 | reg = <0x4500 0x100>; | |
| 255 | clock-frequency = <400000000>; | |
| 256 | interrupts = <9 0x8>; | |
| 257 | interrupt-parent = <&ipic>; | |
| 258 | }; | |
| 259 | ||
| 260 | serial1: serial@4600 { | |
| 261 | cell-index = <1>; | |
| 262 | device_type = "serial"; | |
| 263 | compatible = "ns16550"; | |
| 264 | reg = <0x4600 0x100>; | |
| 265 | clock-frequency = <400000000>; | |
| 266 | interrupts = <10 0x8>; | |
| 267 | interrupt-parent = <&ipic>; | |
| 268 | }; | |
| 269 | ||
| 270 | /* May need to remove if on a part without crypto engine */ | |
| 271 | crypto@30000 { | |
| 272 | device_type = "crypto"; | |
| 273 | model = "SEC2"; | |
| 274 | compatible = "talitos"; | |
| 275 | reg = <0x30000 0x10000>; | |
| 276 | interrupts = <11 0x8>; | |
| 277 | interrupt-parent = <&ipic>; | |
| 278 | num-channels = <4>; | |
| 279 | channel-fifo-len = <24>; | |
| 280 | exec-units-mask = <0x0000007e>; | |
| 281 | /* desc mask is for rev2.0, | |
| 282 | * we need runtime fixup for >2.0 */ | |
| 283 | descriptor-types-mask = <0x01010ebf>; | |
| 284 | }; | |
| 285 | ||
| 286 | /* IPIC | |
| 287 | * interrupts cell = <intr #, sense> | |
| 288 | * sense values match linux IORESOURCE_IRQ_* defines: | |
| 289 | * sense == 8: Level, low assertion | |
| 290 | * sense == 2: Edge, high-to-low change | |
| 291 | */ | |
| 292 | ipic: pic@700 { | |
| 293 | interrupt-controller; | |
| 294 | #address-cells = <0>; | |
| 295 | #interrupt-cells = <2>; | |
| 296 | reg = <0x700 0x100>; | |
| 297 | device_type = "ipic"; | |
| 298 | }; | |
| 299 | }; | |
| 300 | ||
| 301 | chosen { | |
| 302 | bootargs = "console=ttyS0,38400 root=/dev/mtdblock3 rootfstype=jffs2"; | |
| 303 | linux,stdout-path = &serial0; | |
| 304 | }; | |
| 305 | ||
| 306 | }; |