[linux-block.git] / arch / powerpc / boot / dts / ac14xx.dts

// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * Device Tree Source for the MPC5121e based ac14xx board
 *
 * Copyright 2012 Anatolij Gustschin <agust@denx.de>
 */


#include "mpc5121.dtsi"

/ {
	model = "ac14xx";
	compatible = "ifm,ac14xx", "fsl,mpc5121";
	#address-cells = <1>;
	#size-cells = <1>;

	aliases {
		serial0 = &serial0;
		serial1 = &serial7;
		spi4 = &spi4;
		spi5 = &spi5;
	};

	cpus {
		PowerPC,5121@0 {
			timebase-frequency = <40000000>;	/*  40 MHz (csb/4) */
			bus-frequency = <160000000>;		/* 160 MHz csb bus */
			clock-frequency = <400000000>;		/* 400 MHz ppc core */
		};
	};

	memory {
		reg = <0x00000000 0x10000000>;			/* 256MB at 0 */
	};

	nfc@40000000 {
		status = "disabled";
	};

	localbus@80000020 {
		ranges = <0x0 0x0 0xfc000000 0x04000000	/* CS0: NOR flash */
			  0x1 0x0 0xe0000000 0x00010000 /* CS1: FRAM */
			  0x2 0x0 0xe0100000 0x00080000 /* CS2: asi1 */
			  0x3 0x0 0xe0300000 0x00020000 /* CS3: comm */
			  0x5 0x0 0xe0400000 0x00010000 /* CS5: safety */
			  0x6 0x0 0xe0200000 0x00080000>; /* CS6: asi2 */

		flash@0,0 {
			compatible = "cfi-flash";
			reg = <0 0x00000000 0x04000000>;
			#address-cells = <1>;
			#size-cells = <1>;
			bank-width = <2>;
			device-width = <2>;

			partition@0 {
				label = "dtb-kernel-production";
				reg = <0x00000000 0x00400000>;
			};
			partition@1 {
				label = "filesystem-production";
				reg = <0x00400000 0x03400000>;
			};

			partition@2 {
				label = "recovery";
				reg = <0x03800000 0x00700000>;
			};

			partition@3 {
				label = "uboot-code";
				reg = <0x03f00000 0x00040000>;
			};
			partition@4 {
				label = "uboot-env1";
				reg = <0x03f40000 0x00020000>;
			};
			partition@5 {
				label = "uboot-env2";
				reg = <0x03f60000 0x00020000>;
			};
		};

		fram@1,0 {
			compatible = "ifm,ac14xx-fram", "linux,uio-pdrv-genirq";
			reg = <1 0x00000000 0x00010000>;
		};

		asi@2,0 {
			/* masters mapping: CS, CS offset, size */
			reg = <2 0x00000000 0x00080000
			       6 0x00000000 0x00080000>;
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "ifm,ac14xx-asi-fpga";
			gpios = <
				&gpio_pic 26 0	/* prog */
				&gpio_pic 27 0	/* done */
				&gpio_pic 10 0	/* reset */
				>;

			master@1 {
				interrupts = <20 0x2>;
				interrupt-parent = <&gpio_pic>;
				chipselect = <2 0x00009000 0x00009100>;
				label = "AS-i master 1";
			};

			master@2 {
				interrupts = <21 0x2>;
				interrupt-parent = <&gpio_pic>;
				chipselect = <6 0x00009000 0x00009100>;
				label = "AS-i master 2";
			};
		};

		netx@3,0 {
			compatible = "ifm,netx";
			reg = <0x3 0x00000000 0x00020000>;
			chipselect = <3 0x00101140 0x00203100>;
			interrupts = <17 0x8>;
			gpios = <&gpio_pic 15 0>;
		};

		safety@5,0 {
			compatible = "ifm,safety";
			reg = <0x5 0x00000000 0x00010000>;
			chipselect = <5 0x00009000 0x00009100>;
			interrupts = <22 0x2>;
			interrupt-parent = <&gpio_pic>;
			gpios = <
				&gpio_pic 12 0	/* prog */
				&gpio_pic 11 0	/* done */
				>;
		};
	};

	clocks {
		osc {
			clock-frequency = <25000000>;
		};
	};

	soc@80000000 {
		bus-frequency = <80000000>;	/* 80 MHz ips bus */

		clock@f00 {
			compatible = "fsl,mpc5121rev2-clock", "fsl,mpc5121-clock";
		};

		/*
		 * GPIO PIC:
		 * interrupts cell = <pin nr, sense>
		 * sense == 8: Level, low assertion
		 * sense == 2: Edge, high-to-low change
		 */
		gpio_pic: gpio@1100 {
			gpio-controller;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		sdhc@1500 {
			cd-gpios = <&gpio_pic 23 0>;	/* card detect */
			wp-gpios = <&gpio_pic 24 0>;	/* write protect */
			wp-inverted;			/* WP active high */
		};

		i2c@1700 {
			/* use Fast-mode */
			clock-frequency = <400000>;

			at24@30 {
				compatible = "atmel,24c01";
				reg = <0x30>;
			};

			at24@31 {
				compatible = "atmel,24c01";
				reg = <0x31>;
			};

			temp@48 {
				compatible = "ad,ad7414";
				reg = <0x48>;
			};

			at24@50 {
				compatible = "atmel,24c01";
				reg = <0x50>;
			};

			at24@51 {
				compatible = "atmel,24c01";
				reg = <0x51>;
			};

			at24@52 {
				compatible = "atmel,24c01";
				reg = <0x52>;
			};

			at24@53 {
				compatible = "atmel,24c01";
				reg = <0x53>;
			};

			at24@54 {
				compatible = "atmel,24c01";
				reg = <0x54>;
			};

			at24@55 {
				compatible = "atmel,24c01";
				reg = <0x55>;
			};

			at24@56 {
				compatible = "atmel,24c01";
				reg = <0x56>;
			};

			at24@57 {
				compatible = "atmel,24c01";
				reg = <0x57>;
			};

			rtc@68 {
				compatible = "st,m41t00";
				reg = <0x68>;
			};
		};

		axe_pic: axe-base@2000 {
			compatible = "fsl,mpc5121-axe-base";
			reg = <0x2000 0x100>;
			interrupts = <42 0x8>;
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		axe-app {
			compatible = "fsl,mpc5121-axe-app";
			interrupt-parent = <&axe_pic>;
			interrupts = <
					/* soft interrupts */
					0 0x0	1 0x0	2 0x0	3 0x0
					4 0x0	5 0x0	6 0x0	7 0x0
					/* fifo interrupts */
					8 0x0	9 0x0	10 0x0	11 0x0
				>;
		};

		display@2100 {
			edid = [00 FF FF FF FF FF FF 00 14 94 00 00 00 00 00 00
				0A 12 01 03 80 1C 23 78 CA 88 FF 94 52 54 8E 27
				1E 4C 50 00 00 00 01 01 01 01 01 01 01 01 01 01
				01 01 01 01 01 01 FB 00 B0 14 00 DC 05 00 08 04
				21 00 1C 23 00 00 00 18 00 00 00 FD 00 38 3C 1F
				3C 01 0A 20 20 20 20 20 20 20 00 00 00 FC 00 45
				54 30 31 38 30 30 33 44 4D 55 0A 0A 00 00 00 10
				00 41 30 30 30 30 30 30 30 30 30 30 30 31 00 D5];
		};

		can@2300 {
			status = "disabled";
		};

		can@2380 {
			status = "disabled";
		};

		viu@2400 {
			status = "disabled";
		};

		mdio@2800 {
			phy0: ethernet-phy@1f {
				compatible = "smsc,lan8700";
				reg = <0x1f>;
			};
		};

		enet: ethernet@2800 {
			phy-handle = <&phy0>;
		};

		usb@3000 {
			status = "disabled";
		};

		usb@4000 {
			status = "disabled";
		};

		/* PSC3 serial port A, aka ttyPSC0 */
		serial0: psc@11300 {
			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
			fsl,rx-fifo-size = <512>;
			fsl,tx-fifo-size = <512>;
		};

		/* PSC4 in SPI mode */
		spi4: psc@11400 {
			compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc";
			fsl,rx-fifo-size = <768>;
			fsl,tx-fifo-size = <768>;
			#address-cells = <1>;
			#size-cells = <0>;
			num-cs = <1>;
			cs-gpios = <&gpio_pic 25 0>;

			flash: m25p128@0 {
				compatible = "st,m25p128";
				spi-max-frequency = <20000000>;
				reg = <0>;
				#address-cells = <1>;
				#size-cells = <1>;

				partition@0 {
					label = "spi-flash0";
					reg = <0x00000000 0x01000000>;
				};
			};
		};

		/* PSC5 in SPI mode */
		spi5: psc@11500 {
			compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc";
			fsl,mode = "spi-master";
			fsl,rx-fifo-size = <128>;
			fsl,tx-fifo-size = <128>;
			#address-cells = <1>;
			#size-cells = <0>;

			lcd@0 {
				compatible = "ilitek,ili922x";
				reg = <0>;
				spi-max-frequency = <100000>;
				spi-cpol;
				spi-cpha;
			};
		};

		/* PSC7 serial port C, aka ttyPSC2 */
		serial7: psc@11700 {
			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
			fsl,rx-fifo-size = <512>;
			fsl,tx-fifo-size = <512>;
		};

		matrix_keypad@0 {
			compatible = "gpio-matrix-keypad";
			debounce-delay-ms = <5>;
			col-scan-delay-us = <1>;
			gpio-activelow;
			col-gpios-binary;
			col-switch-delay-ms = <200>;

			col-gpios = <&gpio_pic 1 0>;	/* pin1 */

			row-gpios = <&gpio_pic 2 0	/* pin2 */
				     &gpio_pic 3 0	/* pin3 */
				     &gpio_pic 4 0>;	/* pin4 */

			linux,keymap = <0x0000006e	/* FN LEFT */
					0x01000067	/* UP */
					0x02000066	/* FN RIGHT */
					0x00010069	/* LEFT */
					0x0101006a	/* DOWN */
					0x0201006c>;	/* RIGHT */
		};
	};

	leds {
		compatible = "gpio-leds";

		backlight {
			label = "backlight";
			gpios = <&gpio_pic 0 0>;
			default-state = "keep";
		};
		green {
			label = "green";
			gpios = <&gpio_pic 18 0>;
			default-state = "keep";
		};
		red {
			label = "red";
			gpios = <&gpio_pic 19 0>;
			default-state = "keep";
		};
	};
};
Commit	Line	Data
2874c5fd	1	// SPDX-License-Identifier: GPL-2.0-or-later
fdeaf0e2 AG	2	/*
	3	* Device Tree Source for the MPC5121e based ac14xx board
	4	*
	5	* Copyright 2012 Anatolij Gustschin <agust@denx.de>
fdeaf0e2 AG	6	*/
	7
	8
5405c92b	9	#include "mpc5121.dtsi"
fdeaf0e2 AG	10
	11	/ {
	12	model = "ac14xx";
	13	compatible = "ifm,ac14xx", "fsl,mpc5121";
	14	#address-cells = <1>;
	15	#size-cells = <1>;
	16
	17	aliases {
	18	serial0 = &serial0;
	19	serial1 = &serial7;
	20	spi4 = &spi4;
	21	spi5 = &spi5;
	22	};
	23
	24	cpus {
	25	PowerPC,5121@0 {
	26	timebase-frequency = <40000000>; /* 40 MHz (csb/4) */
	27	bus-frequency = <160000000>; /* 160 MHz csb bus */
	28	clock-frequency = <400000000>; /* 400 MHz ppc core */
	29	};
	30	};
	31
	32	memory {
	33	reg = <0x00000000 0x10000000>; /* 256MB at 0 */
	34	};
	35
	36	nfc@40000000 {
	37	status = "disabled";
	38	};
	39
	40	localbus@80000020 {
	41	ranges = <0x0 0x0 0xfc000000 0x04000000 /* CS0: NOR flash */
	42	0x1 0x0 0xe0000000 0x00010000 /* CS1: FRAM */
	43	0x2 0x0 0xe0100000 0x00080000 /* CS2: asi1 */
	44	0x3 0x0 0xe0300000 0x00020000 /* CS3: comm */
	45	0x5 0x0 0xe0400000 0x00010000 /* CS5: safety */
	46	0x6 0x0 0xe0200000 0x00080000>; /* CS6: asi2 */
	47
	48	flash@0,0 {
	49	compatible = "cfi-flash";
	50	reg = <0 0x00000000 0x04000000>;
	51	#address-cells = <1>;
	52	#size-cells = <1>;
	53	bank-width = <2>;
	54	device-width = <2>;
	55
	56	partition@0 {
	57	label = "dtb-kernel-production";
	58	reg = <0x00000000 0x00400000>;
	59	};
	60	partition@1 {
	61	label = "filesystem-production";
	62	reg = <0x00400000 0x03400000>;
	63	};
	64
	65	partition@2 {
	66	label = "recovery";
	67	reg = <0x03800000 0x00700000>;
	68	};
	69
	70	partition@3 {
	71	label = "uboot-code";
	72	reg = <0x03f00000 0x00040000>;
	73	};
74	partition@4 {
75	label = "uboot-env1";
76	reg = <0x03f40000 0x00020000>;
77	};
78	partition@5 {
79	label = "uboot-env2";
80	reg = <0x03f60000 0x00020000>;
81	};
82	};
83
84	fram@1,0 {
85	compatible = "ifm,ac14xx-fram", "linux,uio-pdrv-genirq";
86	reg = <1 0x00000000 0x00010000>;
87	};
88
89	asi@2,0 {
90	/* masters mapping: CS, CS offset, size */
91	reg = <2 0x00000000 0x00080000
92	6 0x00000000 0x00080000>;
93	#address-cells = <1>;
94	#size-cells = <1>;
95	compatible = "ifm,ac14xx-asi-fpga";
96	gpios = <
97	&gpio_pic 26 0 /* prog */
98	&gpio_pic 27 0 /* done */
99	&gpio_pic 10 0 /* reset */
100	>;
101
102	master@1 {
103	interrupts = <20 0x2>;
104	interrupt-parent = <&gpio_pic>;
105	chipselect = <2 0x00009000 0x00009100>;
106	label = "AS-i master 1";
107	};
108
109	master@2 {
110	interrupts = <21 0x2>;
111	interrupt-parent = <&gpio_pic>;
112	chipselect = <6 0x00009000 0x00009100>;
113	label = "AS-i master 2";
114	};
115	};
116
117	netx@3,0 {
118	compatible = "ifm,netx";
119	reg = <0x3 0x00000000 0x00020000>;
120	chipselect = <3 0x00101140 0x00203100>;
121	interrupts = <17 0x8>;
122	gpios = <&gpio_pic 15 0>;
123	};
124
125	safety@5,0 {
126	compatible = "ifm,safety";
127	reg = <0x5 0x00000000 0x00010000>;
128	chipselect = <5 0x00009000 0x00009100>;
129	interrupts = <22 0x2>;
130	interrupt-parent = <&gpio_pic>;
131	gpios = <
132	&gpio_pic 12 0 /* prog */
133	&gpio_pic 11 0 /* done */
134	>;
135	};
136	};
137
f87ccd2e GS	138	clocks {
	139	osc {
	140	clock-frequency = <25000000>;
	141	};
	142	};
	143
fdeaf0e2	144	soc@80000000 {
f87ccd2e	145	bus-frequency = <80000000>; /* 80 MHz ips bus */
fdeaf0e2 AG	146
	147	clock@f00 {
	148	compatible = "fsl,mpc5121rev2-clock", "fsl,mpc5121-clock";
	149	};
	150
	151	/*
	152	* GPIO PIC:
	153	* interrupts cell = <pin nr, sense>
	154	* sense == 8: Level, low assertion
	155	* sense == 2: Edge, high-to-low change
	156	*/
	157	gpio_pic: gpio@1100 {
	158	gpio-controller;
	159	#gpio-cells = <2>;
	160	interrupt-controller;
	161	#interrupt-cells = <2>;
	162	};
	163
	164	sdhc@1500 {
	165	cd-gpios = <&gpio_pic 23 0>; /* card detect */
	166	wp-gpios = <&gpio_pic 24 0>; /* write protect */
	167	wp-inverted; /* WP active high */
	168	};
	169
	170	i2c@1700 {
	171	/* use Fast-mode */
	172	clock-frequency = <400000>;
	173
	174	at24@30 {
1e5d7584	175	compatible = "atmel,24c01";
fdeaf0e2 AG	176	reg = <0x30>;
	177	};
	178
	179	at24@31 {
1e5d7584	180	compatible = "atmel,24c01";
fdeaf0e2 AG	181	reg = <0x31>;
	182	};
	183
	184	temp@48 {
	185	compatible = "ad,ad7414";
	186	reg = <0x48>;
	187	};
	188
	189	at24@50 {
1e5d7584	190	compatible = "atmel,24c01";
fdeaf0e2 AG	191	reg = <0x50>;
	192	};
	193
	194	at24@51 {
1e5d7584	195	compatible = "atmel,24c01";
fdeaf0e2 AG	196	reg = <0x51>;
	197	};
	198
	199	at24@52 {
1e5d7584	200	compatible = "atmel,24c01";
fdeaf0e2 AG	201	reg = <0x52>;
	202	};
	203
	204	at24@53 {
1e5d7584	205	compatible = "atmel,24c01";
fdeaf0e2 AG	206	reg = <0x53>;
	207	};
	208
	209	at24@54 {
1e5d7584	210	compatible = "atmel,24c01";
fdeaf0e2 AG	211	reg = <0x54>;
	212	};
	213
	214	at24@55 {
1e5d7584	215	compatible = "atmel,24c01";
fdeaf0e2 AG	216	reg = <0x55>;
	217	};
	218
	219	at24@56 {
1e5d7584	220	compatible = "atmel,24c01";
fdeaf0e2 AG	221	reg = <0x56>;
	222	};
	223
	224	at24@57 {
1e5d7584	225	compatible = "atmel,24c01";
fdeaf0e2 AG	226	reg = <0x57>;
	227	};
	228
	229	rtc@68 {
5edc2aae	230	compatible = "st,m41t00";
fdeaf0e2 AG	231	reg = <0x68>;
	232	};
	233	};
	234
	235	axe_pic: axe-base@2000 {
	236	compatible = "fsl,mpc5121-axe-base";
	237	reg = <0x2000 0x100>;
	238	interrupts = <42 0x8>;
	239	interrupt-controller;
	240	#interrupt-cells = <2>;
	241	};
	242
	243	axe-app {
	244	compatible = "fsl,mpc5121-axe-app";
	245	interrupt-parent = <&axe_pic>;
	246	interrupts = <
	247	/* soft interrupts */
	248	0 0x0 1 0x0 2 0x0 3 0x0
	249	4 0x0 5 0x0 6 0x0 7 0x0
	250	/* fifo interrupts */
	251	8 0x0 9 0x0 10 0x0 11 0x0
	252	>;
	253	};
	254
	255	display@2100 {
	256	edid = [00 FF FF FF FF FF FF 00 14 94 00 00 00 00 00 00
	257	0A 12 01 03 80 1C 23 78 CA 88 FF 94 52 54 8E 27
	258	1E 4C 50 00 00 00 01 01 01 01 01 01 01 01 01 01
	259	01 01 01 01 01 01 FB 00 B0 14 00 DC 05 00 08 04
	260	21 00 1C 23 00 00 00 18 00 00 00 FD 00 38 3C 1F
	261	3C 01 0A 20 20 20 20 20 20 20 00 00 00 FC 00 45
	262	54 30 31 38 30 30 33 44 4D 55 0A 0A 00 00 00 10
	263	00 41 30 30 30 30 30 30 30 30 30 30 30 31 00 D5];
	264	};
	265
	266	can@2300 {
	267	status = "disabled";
	268	};
	269
	270	can@2380 {
	271	status = "disabled";
	272	};
	273
	274	viu@2400 {
	275	status = "disabled";
	276	};
	277
	278	mdio@2800 {
	279	phy0: ethernet-phy@1f {
	280	compatible = "smsc,lan8700";
	281	reg = <0x1f>;
	282	};
	283	};
	284
	285	enet: ethernet@2800 {
	286	phy-handle = <&phy0>;
	287	};
	288
	289	usb@3000 {
	290	status = "disabled";
	291	};
	292
	293	usb@4000 {
	294	status = "disabled";
295	};
296
297	/* PSC3 serial port A, aka ttyPSC0 */
298	serial0: psc@11300 {
299	compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
300	fsl,rx-fifo-size = <512>;
301	fsl,tx-fifo-size = <512>;
302	};
303
304	/* PSC4 in SPI mode */
305	spi4: psc@11400 {
306	compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc";
307	fsl,rx-fifo-size = <768>;
308	fsl,tx-fifo-size = <768>;
309	#address-cells = <1>;
310	#size-cells = <0>;
311	num-cs = <1>;
312	cs-gpios = <&gpio_pic 25 0>;
313
314	flash: m25p128@0 {
315	compatible = "st,m25p128";
316	spi-max-frequency = <20000000>;
317	reg = <0>;
318	#address-cells = <1>;
319	#size-cells = <1>;
320
321	partition@0 {
322	label = "spi-flash0";
323	reg = <0x00000000 0x01000000>;
324	};
325	};
326	};
327
328	/* PSC5 in SPI mode */
329	spi5: psc@11500 {
330	compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc";
331	fsl,mode = "spi-master";
332	fsl,rx-fifo-size = <128>;
333	fsl,tx-fifo-size = <128>;
334	#address-cells = <1>;
335	#size-cells = <0>;
336
337	lcd@0 {
338	compatible = "ilitek,ili922x";
339	reg = <0>;
340	spi-max-frequency = <100000>;
341	spi-cpol;
342	spi-cpha;
343	};
344	};
345
346	/* PSC7 serial port C, aka ttyPSC2 */
347	serial7: psc@11700 {
348	compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
349	fsl,rx-fifo-size = <512>;
350	fsl,tx-fifo-size = <512>;
351	};
352
353	matrix_keypad@0 {
354	compatible = "gpio-matrix-keypad";
355	debounce-delay-ms = <5>;
356	col-scan-delay-us = <1>;
357	gpio-activelow;
358	col-gpios-binary;
359	col-switch-delay-ms = <200>;
360
361	col-gpios = <&gpio_pic 1 0>; /* pin1 */
362
363	row-gpios = <&gpio_pic 2 0 /* pin2 */
364	&gpio_pic 3 0 /* pin3 */
365	&gpio_pic 4 0>; /* pin4 */
366
367	linux,keymap = <0x0000006e /* FN LEFT */
368	0x01000067 /* UP */
369	0x02000066 /* FN RIGHT */
370	0x00010069 /* LEFT */
371	0x0101006a /* DOWN */
372	0x0201006c>; /* RIGHT */
373	};
374	};
375
376	leds {
377	compatible = "gpio-leds";
378
379	backlight {
380	label = "backlight";
381	gpios = <&gpio_pic 0 0>;
382	default-state = "keep";
383	};
384	green {
385	label = "green";
386	gpios = <&gpio_pic 18 0>;
387	default-state = "keep";
388	};
389	red {
390	label = "red";
391	gpios = <&gpio_pic 19 0>;
392	default-state = "keep";
393	};
394	};
395	};