Commit | Line | Data |
---|---|---|
b2441318 | 1 | // SPDX-License-Identifier: GPL-2.0 |
7517de34 ML |
2 | /* |
3 | * Alchemy PCI host mode support. | |
4 | * | |
5 | * Copyright 2001-2003, 2007-2008 MontaVista Software Inc. | |
6 | * Author: MontaVista Software, Inc. <source@mvista.com> | |
7 | * | |
8 | * Support for all devices (greater than 16) added by David Gathright. | |
9 | */ | |
10 | ||
8e211705 | 11 | #include <linux/clk.h> |
71ca8693 | 12 | #include <linux/export.h> |
7517de34 ML |
13 | #include <linux/types.h> |
14 | #include <linux/pci.h> | |
15 | #include <linux/platform_device.h> | |
16 | #include <linux/kernel.h> | |
17 | #include <linux/init.h> | |
864c6c22 | 18 | #include <linux/syscore_ops.h> |
7517de34 ML |
19 | #include <linux/vmalloc.h> |
20 | ||
88e9a93c | 21 | #include <asm/dma-coherence.h> |
7517de34 | 22 | #include <asm/mach-au1x00/au1000.h> |
3d18c983 | 23 | #include <asm/tlbmisc.h> |
7517de34 | 24 | |
143f0f65 | 25 | #ifdef CONFIG_PCI_DEBUG |
7517de34 ML |
26 | #define DBG(x...) printk(KERN_DEBUG x) |
27 | #else | |
28 | #define DBG(x...) do {} while (0) | |
29 | #endif | |
30 | ||
31 | #define PCI_ACCESS_READ 0 | |
32 | #define PCI_ACCESS_WRITE 1 | |
33 | ||
34 | struct alchemy_pci_context { | |
70342287 | 35 | struct pci_controller alchemy_pci_ctrl; /* leave as first member! */ |
7517de34 ML |
36 | void __iomem *regs; /* ctrl base */ |
37 | /* tools for wired entry for config space access */ | |
38 | unsigned long last_elo0; | |
39 | unsigned long last_elo1; | |
40 | int wired_entry; | |
41 | struct vm_struct *pci_cfg_vm; | |
42 | ||
43 | unsigned long pm[12]; | |
44 | ||
45 | int (*board_map_irq)(const struct pci_dev *d, u8 slot, u8 pin); | |
46 | int (*board_pci_idsel)(unsigned int devsel, int assert); | |
47 | }; | |
48 | ||
864c6c22 ML |
49 | /* for syscore_ops. There's only one PCI controller on Alchemy chips, so this |
50 | * should suffice for now. | |
51 | */ | |
52 | static struct alchemy_pci_context *__alchemy_pci_ctx; | |
53 | ||
54 | ||
7517de34 ML |
55 | /* IO/MEM resources for PCI. Keep the memres in sync with __fixup_bigphys_addr |
56 | * in arch/mips/alchemy/common/setup.c | |
57 | */ | |
58 | static struct resource alchemy_pci_def_memres = { | |
59 | .start = ALCHEMY_PCI_MEMWIN_START, | |
60 | .end = ALCHEMY_PCI_MEMWIN_END, | |
61 | .name = "PCI memory space", | |
62 | .flags = IORESOURCE_MEM | |
63 | }; | |
64 | ||
65 | static struct resource alchemy_pci_def_iores = { | |
66 | .start = ALCHEMY_PCI_IOWIN_START, | |
67 | .end = ALCHEMY_PCI_IOWIN_END, | |
68 | .name = "PCI IO space", | |
69 | .flags = IORESOURCE_IO | |
70 | }; | |
71 | ||
72 | static void mod_wired_entry(int entry, unsigned long entrylo0, | |
73 | unsigned long entrylo1, unsigned long entryhi, | |
74 | unsigned long pagemask) | |
75 | { | |
76 | unsigned long old_pagemask; | |
77 | unsigned long old_ctx; | |
78 | ||
79 | /* Save old context and create impossible VPN2 value */ | |
9b5c3399 | 80 | old_ctx = read_c0_entryhi() & MIPS_ENTRYHI_ASID; |
7517de34 ML |
81 | old_pagemask = read_c0_pagemask(); |
82 | write_c0_index(entry); | |
83 | write_c0_pagemask(pagemask); | |
84 | write_c0_entryhi(entryhi); | |
85 | write_c0_entrylo0(entrylo0); | |
86 | write_c0_entrylo1(entrylo1); | |
87 | tlb_write_indexed(); | |
88 | write_c0_entryhi(old_ctx); | |
89 | write_c0_pagemask(old_pagemask); | |
90 | } | |
91 | ||
92 | static void alchemy_pci_wired_entry(struct alchemy_pci_context *ctx) | |
93 | { | |
94 | ctx->wired_entry = read_c0_wired(); | |
95 | add_wired_entry(0, 0, (unsigned long)ctx->pci_cfg_vm->addr, PM_4K); | |
96 | ctx->last_elo0 = ctx->last_elo1 = ~0; | |
97 | } | |
98 | ||
99 | static int config_access(unsigned char access_type, struct pci_bus *bus, | |
100 | unsigned int dev_fn, unsigned char where, u32 *data) | |
101 | { | |
102 | struct alchemy_pci_context *ctx = bus->sysdata; | |
103 | unsigned int device = PCI_SLOT(dev_fn); | |
104 | unsigned int function = PCI_FUNC(dev_fn); | |
105 | unsigned long offset, status, cfg_base, flags, entryLo0, entryLo1, r; | |
106 | int error = PCIBIOS_SUCCESSFUL; | |
107 | ||
108 | if (device > 19) { | |
109 | *data = 0xffffffff; | |
110 | return -1; | |
111 | } | |
112 | ||
7517de34 ML |
113 | local_irq_save(flags); |
114 | r = __raw_readl(ctx->regs + PCI_REG_STATCMD) & 0x0000ffff; | |
115 | r |= PCI_STATCMD_STATUS(0x2000); | |
116 | __raw_writel(r, ctx->regs + PCI_REG_STATCMD); | |
117 | wmb(); | |
118 | ||
119 | /* Allow board vendors to implement their own off-chip IDSEL. | |
120 | * If it doesn't succeed, may as well bail out at this point. | |
121 | */ | |
122 | if (ctx->board_pci_idsel(device, 1) == 0) { | |
123 | *data = 0xffffffff; | |
124 | local_irq_restore(flags); | |
125 | return -1; | |
126 | } | |
127 | ||
128 | /* Setup the config window */ | |
129 | if (bus->number == 0) | |
130 | cfg_base = (1 << device) << 11; | |
131 | else | |
132 | cfg_base = 0x80000000 | (bus->number << 16) | (device << 11); | |
133 | ||
134 | /* Setup the lower bits of the 36-bit address */ | |
135 | offset = (function << 8) | (where & ~0x3); | |
136 | /* Pick up any address that falls below the page mask */ | |
137 | offset |= cfg_base & ~PAGE_MASK; | |
138 | ||
139 | /* Page boundary */ | |
140 | cfg_base = cfg_base & PAGE_MASK; | |
141 | ||
142 | /* To improve performance, if the current device is the same as | |
143 | * the last device accessed, we don't touch the TLB. | |
144 | */ | |
145 | entryLo0 = (6 << 26) | (cfg_base >> 6) | (2 << 3) | 7; | |
146 | entryLo1 = (6 << 26) | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7; | |
147 | if ((entryLo0 != ctx->last_elo0) || (entryLo1 != ctx->last_elo1)) { | |
148 | mod_wired_entry(ctx->wired_entry, entryLo0, entryLo1, | |
149 | (unsigned long)ctx->pci_cfg_vm->addr, PM_4K); | |
150 | ctx->last_elo0 = entryLo0; | |
151 | ctx->last_elo1 = entryLo1; | |
152 | } | |
153 | ||
154 | if (access_type == PCI_ACCESS_WRITE) | |
155 | __raw_writel(*data, ctx->pci_cfg_vm->addr + offset); | |
156 | else | |
157 | *data = __raw_readl(ctx->pci_cfg_vm->addr + offset); | |
158 | wmb(); | |
159 | ||
160 | DBG("alchemy-pci: cfg access %d bus %u dev %u at %x dat %x conf %lx\n", | |
161 | access_type, bus->number, device, where, *data, offset); | |
162 | ||
163 | /* check for errors, master abort */ | |
164 | status = __raw_readl(ctx->regs + PCI_REG_STATCMD); | |
165 | if (status & (1 << 29)) { | |
166 | *data = 0xffffffff; | |
167 | error = -1; | |
143f0f65 | 168 | DBG("alchemy-pci: master abort on cfg access %d bus %d dev %d\n", |
7517de34 ML |
169 | access_type, bus->number, device); |
170 | } else if ((status >> 28) & 0xf) { | |
171 | DBG("alchemy-pci: PCI ERR detected: dev %d, status %lx\n", | |
172 | device, (status >> 28) & 0xf); | |
173 | ||
174 | /* clear errors */ | |
175 | __raw_writel(status & 0xf000ffff, ctx->regs + PCI_REG_STATCMD); | |
176 | ||
177 | *data = 0xffffffff; | |
178 | error = -1; | |
179 | } | |
180 | ||
181 | /* Take away the IDSEL. */ | |
182 | (void)ctx->board_pci_idsel(device, 0); | |
183 | ||
184 | local_irq_restore(flags); | |
185 | return error; | |
186 | } | |
187 | ||
188 | static int read_config_byte(struct pci_bus *bus, unsigned int devfn, | |
189 | int where, u8 *val) | |
190 | { | |
191 | u32 data; | |
192 | int ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data); | |
193 | ||
194 | if (where & 1) | |
195 | data >>= 8; | |
196 | if (where & 2) | |
197 | data >>= 16; | |
198 | *val = data & 0xff; | |
199 | return ret; | |
200 | } | |
201 | ||
202 | static int read_config_word(struct pci_bus *bus, unsigned int devfn, | |
203 | int where, u16 *val) | |
204 | { | |
205 | u32 data; | |
206 | int ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data); | |
207 | ||
208 | if (where & 2) | |
209 | data >>= 16; | |
210 | *val = data & 0xffff; | |
211 | return ret; | |
212 | } | |
213 | ||
214 | static int read_config_dword(struct pci_bus *bus, unsigned int devfn, | |
215 | int where, u32 *val) | |
216 | { | |
217 | return config_access(PCI_ACCESS_READ, bus, devfn, where, val); | |
218 | } | |
219 | ||
220 | static int write_config_byte(struct pci_bus *bus, unsigned int devfn, | |
221 | int where, u8 val) | |
222 | { | |
223 | u32 data = 0; | |
224 | ||
225 | if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) | |
226 | return -1; | |
227 | ||
228 | data = (data & ~(0xff << ((where & 3) << 3))) | | |
229 | (val << ((where & 3) << 3)); | |
230 | ||
231 | if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data)) | |
232 | return -1; | |
233 | ||
234 | return PCIBIOS_SUCCESSFUL; | |
235 | } | |
236 | ||
237 | static int write_config_word(struct pci_bus *bus, unsigned int devfn, | |
238 | int where, u16 val) | |
239 | { | |
240 | u32 data = 0; | |
241 | ||
242 | if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) | |
243 | return -1; | |
244 | ||
245 | data = (data & ~(0xffff << ((where & 3) << 3))) | | |
246 | (val << ((where & 3) << 3)); | |
247 | ||
248 | if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data)) | |
249 | return -1; | |
250 | ||
251 | return PCIBIOS_SUCCESSFUL; | |
252 | } | |
253 | ||
254 | static int write_config_dword(struct pci_bus *bus, unsigned int devfn, | |
255 | int where, u32 val) | |
256 | { | |
257 | return config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val); | |
258 | } | |
259 | ||
260 | static int alchemy_pci_read(struct pci_bus *bus, unsigned int devfn, | |
261 | int where, int size, u32 *val) | |
262 | { | |
263 | switch (size) { | |
264 | case 1: { | |
265 | u8 _val; | |
266 | int rc = read_config_byte(bus, devfn, where, &_val); | |
267 | ||
268 | *val = _val; | |
269 | return rc; | |
270 | } | |
271 | case 2: { | |
272 | u16 _val; | |
273 | int rc = read_config_word(bus, devfn, where, &_val); | |
274 | ||
275 | *val = _val; | |
276 | return rc; | |
277 | } | |
278 | default: | |
279 | return read_config_dword(bus, devfn, where, val); | |
280 | } | |
281 | } | |
282 | ||
283 | static int alchemy_pci_write(struct pci_bus *bus, unsigned int devfn, | |
284 | int where, int size, u32 val) | |
285 | { | |
286 | switch (size) { | |
287 | case 1: | |
288 | return write_config_byte(bus, devfn, where, (u8) val); | |
289 | case 2: | |
290 | return write_config_word(bus, devfn, where, (u16) val); | |
291 | default: | |
292 | return write_config_dword(bus, devfn, where, val); | |
293 | } | |
294 | } | |
295 | ||
296 | static struct pci_ops alchemy_pci_ops = { | |
297 | .read = alchemy_pci_read, | |
298 | .write = alchemy_pci_write, | |
299 | }; | |
300 | ||
301 | static int alchemy_pci_def_idsel(unsigned int devsel, int assert) | |
302 | { | |
303 | return 1; /* success */ | |
304 | } | |
305 | ||
864c6c22 ML |
306 | /* save PCI controller register contents. */ |
307 | static int alchemy_pci_suspend(void) | |
308 | { | |
309 | struct alchemy_pci_context *ctx = __alchemy_pci_ctx; | |
310 | if (!ctx) | |
311 | return 0; | |
312 | ||
313 | ctx->pm[0] = __raw_readl(ctx->regs + PCI_REG_CMEM); | |
314 | ctx->pm[1] = __raw_readl(ctx->regs + PCI_REG_CONFIG) & 0x0009ffff; | |
315 | ctx->pm[2] = __raw_readl(ctx->regs + PCI_REG_B2BMASK_CCH); | |
316 | ctx->pm[3] = __raw_readl(ctx->regs + PCI_REG_B2BBASE0_VID); | |
317 | ctx->pm[4] = __raw_readl(ctx->regs + PCI_REG_B2BBASE1_SID); | |
318 | ctx->pm[5] = __raw_readl(ctx->regs + PCI_REG_MWMASK_DEV); | |
319 | ctx->pm[6] = __raw_readl(ctx->regs + PCI_REG_MWBASE_REV_CCL); | |
320 | ctx->pm[7] = __raw_readl(ctx->regs + PCI_REG_ID); | |
321 | ctx->pm[8] = __raw_readl(ctx->regs + PCI_REG_CLASSREV); | |
322 | ctx->pm[9] = __raw_readl(ctx->regs + PCI_REG_PARAM); | |
323 | ctx->pm[10] = __raw_readl(ctx->regs + PCI_REG_MBAR); | |
324 | ctx->pm[11] = __raw_readl(ctx->regs + PCI_REG_TIMEOUT); | |
325 | ||
326 | return 0; | |
327 | } | |
328 | ||
329 | static void alchemy_pci_resume(void) | |
330 | { | |
331 | struct alchemy_pci_context *ctx = __alchemy_pci_ctx; | |
332 | if (!ctx) | |
333 | return; | |
334 | ||
335 | __raw_writel(ctx->pm[0], ctx->regs + PCI_REG_CMEM); | |
336 | __raw_writel(ctx->pm[2], ctx->regs + PCI_REG_B2BMASK_CCH); | |
337 | __raw_writel(ctx->pm[3], ctx->regs + PCI_REG_B2BBASE0_VID); | |
338 | __raw_writel(ctx->pm[4], ctx->regs + PCI_REG_B2BBASE1_SID); | |
339 | __raw_writel(ctx->pm[5], ctx->regs + PCI_REG_MWMASK_DEV); | |
340 | __raw_writel(ctx->pm[6], ctx->regs + PCI_REG_MWBASE_REV_CCL); | |
341 | __raw_writel(ctx->pm[7], ctx->regs + PCI_REG_ID); | |
342 | __raw_writel(ctx->pm[8], ctx->regs + PCI_REG_CLASSREV); | |
343 | __raw_writel(ctx->pm[9], ctx->regs + PCI_REG_PARAM); | |
344 | __raw_writel(ctx->pm[10], ctx->regs + PCI_REG_MBAR); | |
345 | __raw_writel(ctx->pm[11], ctx->regs + PCI_REG_TIMEOUT); | |
346 | wmb(); | |
347 | __raw_writel(ctx->pm[1], ctx->regs + PCI_REG_CONFIG); | |
348 | wmb(); | |
349 | ||
350 | /* YAMON on all db1xxx boards wipes the TLB and writes zero to C0_wired | |
351 | * on resume, making it necessary to recreate it as soon as possible. | |
352 | */ | |
353 | ctx->wired_entry = 8191; /* impossibly high value */ | |
354 | alchemy_pci_wired_entry(ctx); /* install it */ | |
355 | } | |
356 | ||
357 | static struct syscore_ops alchemy_pci_pmops = { | |
358 | .suspend = alchemy_pci_suspend, | |
359 | .resume = alchemy_pci_resume, | |
360 | }; | |
361 | ||
28eb0e46 | 362 | static int alchemy_pci_probe(struct platform_device *pdev) |
7517de34 ML |
363 | { |
364 | struct alchemy_pci_platdata *pd = pdev->dev.platform_data; | |
365 | struct alchemy_pci_context *ctx; | |
366 | void __iomem *virt_io; | |
367 | unsigned long val; | |
368 | struct resource *r; | |
8e211705 | 369 | struct clk *c; |
7517de34 ML |
370 | int ret; |
371 | ||
372 | /* need at least PCI IRQ mapping table */ | |
373 | if (!pd) { | |
374 | dev_err(&pdev->dev, "need platform data for PCI setup\n"); | |
375 | ret = -ENODEV; | |
376 | goto out; | |
377 | } | |
378 | ||
379 | ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); | |
380 | if (!ctx) { | |
381 | dev_err(&pdev->dev, "no memory for pcictl context\n"); | |
382 | ret = -ENOMEM; | |
383 | goto out; | |
384 | } | |
385 | ||
386 | r = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
387 | if (!r) { | |
70342287 | 388 | dev_err(&pdev->dev, "no pcictl ctrl regs resource\n"); |
7517de34 ML |
389 | ret = -ENODEV; |
390 | goto out1; | |
391 | } | |
392 | ||
393 | if (!request_mem_region(r->start, resource_size(r), pdev->name)) { | |
394 | dev_err(&pdev->dev, "cannot claim pci regs\n"); | |
395 | ret = -ENODEV; | |
396 | goto out1; | |
397 | } | |
398 | ||
8e211705 ML |
399 | c = clk_get(&pdev->dev, "pci_clko"); |
400 | if (IS_ERR(c)) { | |
401 | dev_err(&pdev->dev, "unable to find PCI clock\n"); | |
402 | ret = PTR_ERR(c); | |
403 | goto out2; | |
404 | } | |
405 | ||
406 | ret = clk_prepare_enable(c); | |
407 | if (ret) { | |
408 | dev_err(&pdev->dev, "cannot enable PCI clock\n"); | |
409 | goto out6; | |
410 | } | |
411 | ||
7517de34 ML |
412 | ctx->regs = ioremap_nocache(r->start, resource_size(r)); |
413 | if (!ctx->regs) { | |
414 | dev_err(&pdev->dev, "cannot map pci regs\n"); | |
415 | ret = -ENODEV; | |
8e211705 | 416 | goto out5; |
7517de34 ML |
417 | } |
418 | ||
419 | /* map parts of the PCI IO area */ | |
420 | /* REVISIT: if this changes with a newer variant (doubt it) make this | |
421 | * a platform resource. | |
422 | */ | |
423 | virt_io = ioremap(AU1500_PCI_IO_PHYS_ADDR, 0x00100000); | |
424 | if (!virt_io) { | |
425 | dev_err(&pdev->dev, "cannot remap pci io space\n"); | |
426 | ret = -ENODEV; | |
427 | goto out3; | |
428 | } | |
429 | ctx->alchemy_pci_ctrl.io_map_base = (unsigned long)virt_io; | |
430 | ||
7517de34 ML |
431 | /* Au1500 revisions older than AD have borked coherent PCI */ |
432 | if ((alchemy_get_cputype() == ALCHEMY_CPU_AU1500) && | |
f2302023 PB |
433 | (read_c0_prid() < 0x01030202) && |
434 | (coherentio == IO_COHERENCE_DISABLED)) { | |
7517de34 ML |
435 | val = __raw_readl(ctx->regs + PCI_REG_CONFIG); |
436 | val |= PCI_CONFIG_NC; | |
437 | __raw_writel(val, ctx->regs + PCI_REG_CONFIG); | |
438 | wmb(); | |
439 | dev_info(&pdev->dev, "non-coherent PCI on Au1500 AA/AB/AC\n"); | |
440 | } | |
7517de34 ML |
441 | |
442 | if (pd->board_map_irq) | |
443 | ctx->board_map_irq = pd->board_map_irq; | |
444 | ||
445 | if (pd->board_pci_idsel) | |
446 | ctx->board_pci_idsel = pd->board_pci_idsel; | |
447 | else | |
448 | ctx->board_pci_idsel = alchemy_pci_def_idsel; | |
449 | ||
450 | /* fill in relevant pci_controller members */ | |
451 | ctx->alchemy_pci_ctrl.pci_ops = &alchemy_pci_ops; | |
452 | ctx->alchemy_pci_ctrl.mem_resource = &alchemy_pci_def_memres; | |
453 | ctx->alchemy_pci_ctrl.io_resource = &alchemy_pci_def_iores; | |
454 | ||
455 | /* we can't ioremap the entire pci config space because it's too large, | |
456 | * nor can we dynamically ioremap it because some drivers use the | |
457 | * PCI config routines from within atomic contex and that becomes a | |
458 | * problem in get_vm_area(). Instead we use one wired TLB entry to | |
459 | * handle all config accesses for all busses. | |
460 | */ | |
461 | ctx->pci_cfg_vm = get_vm_area(0x2000, VM_IOREMAP); | |
462 | if (!ctx->pci_cfg_vm) { | |
463 | dev_err(&pdev->dev, "unable to get vm area\n"); | |
464 | ret = -ENOMEM; | |
465 | goto out4; | |
466 | } | |
864c6c22 ML |
467 | ctx->wired_entry = 8191; /* impossibly high value */ |
468 | alchemy_pci_wired_entry(ctx); /* install it */ | |
7517de34 ML |
469 | |
470 | set_io_port_base((unsigned long)ctx->alchemy_pci_ctrl.io_map_base); | |
471 | ||
472 | /* board may want to modify bits in the config register, do it now */ | |
473 | val = __raw_readl(ctx->regs + PCI_REG_CONFIG); | |
474 | val &= ~pd->pci_cfg_clr; | |
475 | val |= pd->pci_cfg_set; | |
476 | val &= ~PCI_CONFIG_PD; /* clear disable bit */ | |
477 | __raw_writel(val, ctx->regs + PCI_REG_CONFIG); | |
478 | wmb(); | |
479 | ||
864c6c22 | 480 | __alchemy_pci_ctx = ctx; |
7517de34 | 481 | platform_set_drvdata(pdev, ctx); |
864c6c22 | 482 | register_syscore_ops(&alchemy_pci_pmops); |
7517de34 ML |
483 | register_pci_controller(&ctx->alchemy_pci_ctrl); |
484 | ||
8e211705 ML |
485 | dev_info(&pdev->dev, "PCI controller at %ld MHz\n", |
486 | clk_get_rate(c) / 1000000); | |
487 | ||
7517de34 ML |
488 | return 0; |
489 | ||
490 | out4: | |
491 | iounmap(virt_io); | |
492 | out3: | |
493 | iounmap(ctx->regs); | |
8e211705 ML |
494 | out5: |
495 | clk_disable_unprepare(c); | |
496 | out6: | |
497 | clk_put(c); | |
7517de34 ML |
498 | out2: |
499 | release_mem_region(r->start, resource_size(r)); | |
500 | out1: | |
501 | kfree(ctx); | |
502 | out: | |
503 | return ret; | |
504 | } | |
505 | ||
7517de34 ML |
506 | static struct platform_driver alchemy_pcictl_driver = { |
507 | .probe = alchemy_pci_probe, | |
70342287 | 508 | .driver = { |
7517de34 | 509 | .name = "alchemy-pci", |
7517de34 ML |
510 | }, |
511 | }; | |
512 | ||
513 | static int __init alchemy_pci_init(void) | |
514 | { | |
515 | /* Au1500/Au1550 have PCI */ | |
516 | switch (alchemy_get_cputype()) { | |
517 | case ALCHEMY_CPU_AU1500: | |
518 | case ALCHEMY_CPU_AU1550: | |
519 | return platform_driver_register(&alchemy_pcictl_driver); | |
520 | } | |
521 | return 0; | |
522 | } | |
523 | arch_initcall(alchemy_pci_init); | |
524 | ||
525 | ||
8eba3651 | 526 | int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) |
7517de34 ML |
527 | { |
528 | struct alchemy_pci_context *ctx = dev->sysdata; | |
529 | if (ctx && ctx->board_map_irq) | |
530 | return ctx->board_map_irq(dev, slot, pin); | |
531 | return -1; | |
532 | } | |
533 | ||
534 | int pcibios_plat_dev_init(struct pci_dev *dev) | |
535 | { | |
536 | return 0; | |
537 | } |