[linux-2.6-block.git] / arch / mips / boot / dts / brcm / bcm7425.dtsi

/ {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "brcm,bcm7425";

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		mips-hpt-frequency = <163125000>;

		cpu@0 {
			compatible = "brcm,bmips5000";
			device_type = "cpu";
			reg = <0>;
		};

		cpu@1 {
			compatible = "brcm,bmips5000";
			device_type = "cpu";
			reg = <1>;
		};
	};

	aliases {
		uart0 = &uart0;
	};

	cpu_intc: cpu_intc {
		#address-cells = <0>;
		compatible = "mti,cpu-interrupt-controller";

		interrupt-controller;
		#interrupt-cells = <1>;
	};

	clocks {
		uart_clk: uart_clk {
			compatible = "fixed-clock";
			#clock-cells = <0>;
			clock-frequency = <81000000>;
		};
	};

	rdb {
		#address-cells = <1>;
		#size-cells = <1>;

		compatible = "simple-bus";
		ranges = <0 0x10000000 0x01000000>;

		periph_intc: periph_intc@41a400 {
			compatible = "brcm,bcm7038-l1-intc";
			reg = <0x41a400 0x30>, <0x41a600 0x30>;

			interrupt-controller;
			#interrupt-cells = <1>;

			interrupt-parent = <&cpu_intc>;
			interrupts = <2>, <3>;
		};

		sun_l2_intc: sun_l2_intc@403000 {
			compatible = "brcm,l2-intc";
			reg = <0x403000 0x30>;
			interrupt-controller;
			#interrupt-cells = <1>;
			interrupt-parent = <&periph_intc>;
			interrupts = <47>;
		};

		gisb-arb@400000 {
			compatible = "brcm,bcm7400-gisb-arb";
			reg = <0x400000 0xdc>;
			native-endian;
			interrupt-parent = <&sun_l2_intc>;
			interrupts = <0>, <2>;
			brcm,gisb-arb-master-mask = <0x177b>;
			brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "pcie_0",
						     "bsp_0", "rdc_0",
						     "raaga_0", "avd_1",
						     "jtag_0", "svd_0",
						     "vice_0";
		};

		upg_irq0_intc: upg_irq0_intc@406780 {
			compatible = "brcm,bcm7120-l2-intc";
			reg = <0x406780 0x8>;

			brcm,int-map-mask = <0x44>;
			brcm,int-fwd-mask = <0x70000>;

			interrupt-controller;
			#interrupt-cells = <1>;

			interrupt-parent = <&periph_intc>;
			interrupts = <55>;
		};

		sun_top_ctrl: syscon@404000 {
			compatible = "brcm,bcm7425-sun-top-ctrl", "syscon";
			reg = <0x404000 0x51c>;
		};

		reboot {
			compatible = "brcm,brcmstb-reboot";
			syscon = <&sun_top_ctrl 0x304 0x308>;
		};

		uart0: serial@406b00 {
			compatible = "ns16550a";
			reg = <0x406b00 0x20>;
			reg-io-width = <0x4>;
			reg-shift = <0x2>;
			interrupt-parent = <&periph_intc>;
			interrupts = <61>;
			clocks = <&uart_clk>;
			status = "disabled";
		};

		enet0: ethernet@b80000 {
			phy-mode = "internal";
			phy-handle = <&phy1>;
			mac-address = [ 00 10 18 36 23 1a ];
			compatible = "brcm,genet-v3";
			#address-cells = <0x1>;
			#size-cells = <0x1>;
			reg = <0xb80000 0x11c88>;
			interrupts = <17>, <18>;
			interrupt-parent = <&periph_intc>;
			status = "disabled";

			mdio@e14 {
				compatible = "brcm,genet-mdio-v3";
				#address-cells = <0x1>;
				#size-cells = <0x0>;
				reg = <0xe14 0x8>;

				phy1: ethernet-phy@1 {
					max-speed = <100>;
					reg = <0x1>;
					compatible = "brcm,40nm-ephy",
						"ethernet-phy-ieee802.3-c22";
				};
			};
		};

		ehci0: usb@480300 {
			compatible = "brcm,bcm7425-ehci", "generic-ehci";
			reg = <0x480300 0x100>;
			native-endian;
			interrupt-parent = <&periph_intc>;
			interrupts = <65>;
			status = "disabled";
		};

		ohci0: usb@480400 {
			compatible = "brcm,bcm7425-ohci", "generic-ohci";
			reg = <0x480400 0x100>;
			native-endian;
			no-big-frame-no;
			interrupt-parent = <&periph_intc>;
			interrupts = <67>;
			status = "disabled";
		};

		ehci1: usb@480500 {
			compatible = "brcm,bcm7425-ehci", "generic-ehci";
			reg = <0x480500 0x100>;
			native-endian;
			interrupt-parent = <&periph_intc>;
			interrupts = <66>;
			status = "disabled";
		};

		ohci1: usb@480600 {
			compatible = "brcm,bcm7425-ohci", "generic-ohci";
			reg = <0x480600 0x100>;
			native-endian;
			no-big-frame-no;
			interrupt-parent = <&periph_intc>;
			interrupts = <68>;
			status = "disabled";
		};

		ehci2: usb@490300 {
			compatible = "brcm,bcm7425-ehci", "generic-ehci";
			reg = <0x490300 0x100>;
			native-endian;
			interrupt-parent = <&periph_intc>;
			interrupts = <70>;
			status = "disabled";
		};

		ohci2: usb@490400 {
			compatible = "brcm,bcm7425-ohci", "generic-ohci";
			reg = <0x490400 0x100>;
			native-endian;
			no-big-frame-no;
			interrupt-parent = <&periph_intc>;
			interrupts = <72>;
			status = "disabled";
		};

		ehci3: usb@490500 {
			compatible = "brcm,bcm7425-ehci", "generic-ehci";
			reg = <0x490500 0x100>;
			native-endian;
			interrupt-parent = <&periph_intc>;
			interrupts = <71>;
			status = "disabled";
		};

		ohci3: usb@490600 {
			compatible = "brcm,bcm7425-ohci", "generic-ohci";
			reg = <0x490600 0x100>;
			native-endian;
			no-big-frame-no;
			interrupt-parent = <&periph_intc>;
			interrupts = <73>;
			status = "disabled";
		};

		sata: sata@181000 {
			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
			reg-names = "ahci", "top-ctrl";
			reg = <0x181000 0xa9c>, <0x180020 0x1c>;
			interrupt-parent = <&periph_intc>;
			interrupts = <40>;
			#address-cells = <1>;
			#size-cells = <0>;
			brcm,broken-ncq;
			brcm,broken-phy;
			status = "disabled";

			sata0: sata-port@0 {
				reg = <0>;
				phys = <&sata_phy0>;
			};

			sata1: sata-port@1 {
				reg = <1>;
				phys = <&sata_phy1>;
			};
		};

		sata_phy: sata-phy@1800000 {
			compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
			reg = <0x180100 0x0eff>;
			reg-names = "phy";
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";

			sata_phy0: sata-phy@0 {
				reg = <0>;
				#phy-cells = <0>;
			};

			sata_phy1: sata-phy@1 {
				reg = <1>;
				#phy-cells = <0>;
			};
		};
	};
};
Commit	Line	Data
8945e37e KC	1	/ {
	2	#address-cells = <1>;
	3	#size-cells = <1>;
	4	compatible = "brcm,bcm7425";
	5
	6	cpus {
	7	#address-cells = <1>;
	8	#size-cells = <0>;
	9
	10	mips-hpt-frequency = <163125000>;
	11
	12	cpu@0 {
	13	compatible = "brcm,bmips5000";
	14	device_type = "cpu";
	15	reg = <0>;
	16	};
	17
	18	cpu@1 {
	19	compatible = "brcm,bmips5000";
	20	device_type = "cpu";
	21	reg = <1>;
	22	};
	23	};
	24
	25	aliases {
	26	uart0 = &uart0;
	27	};
	28
	29	cpu_intc: cpu_intc {
	30	#address-cells = <0>;
	31	compatible = "mti,cpu-interrupt-controller";
	32
	33	interrupt-controller;
	34	#interrupt-cells = <1>;
	35	};
	36
	37	clocks {
	38	uart_clk: uart_clk {
	39	compatible = "fixed-clock";
	40	#clock-cells = <0>;
	41	clock-frequency = <81000000>;
	42	};
	43	};
	44
	45	rdb {
	46	#address-cells = <1>;
	47	#size-cells = <1>;
	48
	49	compatible = "simple-bus";
	50	ranges = <0 0x10000000 0x01000000>;
	51
	52	periph_intc: periph_intc@41a400 {
	53	compatible = "brcm,bcm7038-l1-intc";
	54	reg = <0x41a400 0x30>, <0x41a600 0x30>;
	55
	56	interrupt-controller;
	57	#interrupt-cells = <1>;
	58
	59	interrupt-parent = <&cpu_intc>;
	60	interrupts = <2>, <3>;
	61	};
	62
	63	sun_l2_intc: sun_l2_intc@403000 {
	64	compatible = "brcm,l2-intc";
65	reg = <0x403000 0x30>;
66	interrupt-controller;
67	#interrupt-cells = <1>;
68	interrupt-parent = <&periph_intc>;
69	interrupts = <47>;
70	};
71
72	gisb-arb@400000 {
73	compatible = "brcm,bcm7400-gisb-arb";
74	reg = <0x400000 0xdc>;
75	native-endian;
76	interrupt-parent = <&sun_l2_intc>;
77	interrupts = <0>, <2>;
78	brcm,gisb-arb-master-mask = <0x177b>;
79	brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "pcie_0",
80	"bsp_0", "rdc_0",
81	"raaga_0", "avd_1",
82	"jtag_0", "svd_0",
83	"vice_0";
84	};
85
86	upg_irq0_intc: upg_irq0_intc@406780 {
87	compatible = "brcm,bcm7120-l2-intc";
88	reg = <0x406780 0x8>;
89
90	brcm,int-map-mask = <0x44>;
91	brcm,int-fwd-mask = <0x70000>;
92
93	interrupt-controller;
94	#interrupt-cells = <1>;
95
96	interrupt-parent = <&periph_intc>;
97	interrupts = <55>;
98	};
99
100	sun_top_ctrl: syscon@404000 {
101	compatible = "brcm,bcm7425-sun-top-ctrl", "syscon";
102	reg = <0x404000 0x51c>;
8945e37e KC	103	};
	104
	105	reboot {
	106	compatible = "brcm,brcmstb-reboot";
	107	syscon = <&sun_top_ctrl 0x304 0x308>;
	108	};
	109
	110	uart0: serial@406b00 {
	111	compatible = "ns16550a";
	112	reg = <0x406b00 0x20>;
	113	reg-io-width = <0x4>;
	114	reg-shift = <0x2>;
	115	interrupt-parent = <&periph_intc>;
	116	interrupts = <61>;
	117	clocks = <&uart_clk>;
	118	status = "disabled";
	119	};
	120
	121	enet0: ethernet@b80000 {
	122	phy-mode = "internal";
	123	phy-handle = <&phy1>;
	124	mac-address = [ 00 10 18 36 23 1a ];
	125	compatible = "brcm,genet-v3";
	126	#address-cells = <0x1>;
	127	#size-cells = <0x1>;
	128	reg = <0xb80000 0x11c88>;
	129	interrupts = <17>, <18>;
	130	interrupt-parent = <&periph_intc>;
	131	status = "disabled";
	132
	133	mdio@e14 {
	134	compatible = "brcm,genet-mdio-v3";
	135	#address-cells = <0x1>;
	136	#size-cells = <0x0>;
	137	reg = <0xe14 0x8>;
	138
	139	phy1: ethernet-phy@1 {
	140	max-speed = <100>;
	141	reg = <0x1>;
	142	compatible = "brcm,40nm-ephy",
	143	"ethernet-phy-ieee802.3-c22";
	144	};
	145	};
	146	};
	147
	148	ehci0: usb@480300 {
	149	compatible = "brcm,bcm7425-ehci", "generic-ehci";
	150	reg = <0x480300 0x100>;
	151	native-endian;
	152	interrupt-parent = <&periph_intc>;
	153	interrupts = <65>;
	154	status = "disabled";
	155	};
	156
	157	ohci0: usb@480400 {
	158	compatible = "brcm,bcm7425-ohci", "generic-ohci";
	159	reg = <0x480400 0x100>;
	160	native-endian;
	161	no-big-frame-no;
	162	interrupt-parent = <&periph_intc>;
	163	interrupts = <67>;
	164	status = "disabled";
	165	};
	166
167	ehci1: usb@480500 {
168	compatible = "brcm,bcm7425-ehci", "generic-ehci";
169	reg = <0x480500 0x100>;
170	native-endian;
171	interrupt-parent = <&periph_intc>;
172	interrupts = <66>;
173	status = "disabled";
174	};
175
176	ohci1: usb@480600 {
177	compatible = "brcm,bcm7425-ohci", "generic-ohci";
178	reg = <0x480600 0x100>;
179	native-endian;
180	no-big-frame-no;
181	interrupt-parent = <&periph_intc>;
182	interrupts = <68>;
183	status = "disabled";
184	};
185
186	ehci2: usb@490300 {
187	compatible = "brcm,bcm7425-ehci", "generic-ehci";
188	reg = <0x490300 0x100>;
189	native-endian;
190	interrupt-parent = <&periph_intc>;
191	interrupts = <70>;
192	status = "disabled";
193	};
194
195	ohci2: usb@490400 {
196	compatible = "brcm,bcm7425-ohci", "generic-ohci";
197	reg = <0x490400 0x100>;
198	native-endian;
199	no-big-frame-no;
200	interrupt-parent = <&periph_intc>;
201	interrupts = <72>;
202	status = "disabled";
203	};
204
205	ehci3: usb@490500 {
206	compatible = "brcm,bcm7425-ehci", "generic-ehci";
207	reg = <0x490500 0x100>;
208	native-endian;
209	interrupt-parent = <&periph_intc>;
210	interrupts = <71>;
211	status = "disabled";
212	};
213
214	ohci3: usb@490600 {
215	compatible = "brcm,bcm7425-ohci", "generic-ohci";
216	reg = <0x490600 0x100>;
217	native-endian;
218	no-big-frame-no;
219	interrupt-parent = <&periph_intc>;
220	interrupts = <73>;
221	status = "disabled";
222	};
ce6df637 JS	223
	224	sata: sata@181000 {
	225	compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
	226	reg-names = "ahci", "top-ctrl";
	227	reg = <0x181000 0xa9c>, <0x180020 0x1c>;
	228	interrupt-parent = <&periph_intc>;
	229	interrupts = <40>;
	230	#address-cells = <1>;
	231	#size-cells = <0>;
	232	brcm,broken-ncq;
	233	brcm,broken-phy;
	234	status = "disabled";
	235
	236	sata0: sata-port@0 {
	237	reg = <0>;
	238	phys = <&sata_phy0>;
	239	};
	240
	241	sata1: sata-port@1 {
	242	reg = <1>;
	243	phys = <&sata_phy1>;
	244	};
	245	};
	246
	247	sata_phy: sata-phy@1800000 {
	248	compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
	249	reg = <0x180100 0x0eff>;
	250	reg-names = "phy";
	251	#address-cells = <1>;
	252	#size-cells = <0>;
	253	status = "disabled";
	254
	255	sata_phy0: sata-phy@0 {
	256	reg = <0>;
	257	#phy-cells = <0>;
	258	};
	259
	260	sata_phy1: sata-phy@1 {
	261	reg = <1>;
	262	#phy-cells = <0>;
	263	};
	264	};
8945e37e KC	265	};
8945e37e KC	266	};