Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * Intel IO-APIC support for multi-Pentium hosts. | |
3 | * | |
4 | * Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar, Hajnalka Szabo | |
5 | * | |
6 | * Many thanks to Stig Venaas for trying out countless experimental | |
7 | * patches and reporting/debugging problems patiently! | |
8 | * | |
9 | * (c) 1999, Multiple IO-APIC support, developed by | |
10 | * Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and | |
11 | * Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>, | |
12 | * further tested and cleaned up by Zach Brown <zab@redhat.com> | |
13 | * and Ingo Molnar <mingo@redhat.com> | |
14 | * | |
15 | * Fixes | |
16 | * Maciej W. Rozycki : Bits for genuine 82489DX APICs; | |
17 | * thanks to Eric Gilmore | |
18 | * and Rolf G. Tews | |
19 | * for testing these extensively | |
20 | * Paul Diefenbaugh : Added full ACPI support | |
21 | */ | |
22 | ||
23 | #include <linux/mm.h> | |
1da177e4 LT |
24 | #include <linux/interrupt.h> |
25 | #include <linux/init.h> | |
26 | #include <linux/delay.h> | |
27 | #include <linux/sched.h> | |
1da177e4 LT |
28 | #include <linux/smp_lock.h> |
29 | #include <linux/mc146818rtc.h> | |
30 | #include <linux/compiler.h> | |
31 | #include <linux/acpi.h> | |
129f6946 | 32 | #include <linux/module.h> |
1da177e4 | 33 | #include <linux/sysdev.h> |
2d3fcc1c | 34 | #include <linux/pci.h> |
3b7d1921 | 35 | #include <linux/msi.h> |
54d5d424 | 36 | |
1da177e4 LT |
37 | #include <asm/io.h> |
38 | #include <asm/smp.h> | |
39 | #include <asm/desc.h> | |
40 | #include <asm/timer.h> | |
306e440d | 41 | #include <asm/i8259.h> |
3e4ff115 | 42 | #include <asm/nmi.h> |
2d3fcc1c | 43 | #include <asm/msidef.h> |
8b955b0d | 44 | #include <asm/hypertransport.h> |
1da177e4 LT |
45 | |
46 | #include <mach_apic.h> | |
874c4fe3 | 47 | #include <mach_apicdef.h> |
1da177e4 LT |
48 | |
49 | #include "io_ports.h" | |
50 | ||
51 | int (*ioapic_renumber_irq)(int ioapic, int irq); | |
52 | atomic_t irq_mis_count; | |
53 | ||
fcfd636a EB |
54 | /* Where if anywhere is the i8259 connect in external int mode */ |
55 | static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; | |
56 | ||
1da177e4 | 57 | static DEFINE_SPINLOCK(ioapic_lock); |
0a1ad60d | 58 | static DEFINE_SPINLOCK(vector_lock); |
1da177e4 | 59 | |
f9262c12 AK |
60 | int timer_over_8254 __initdata = 1; |
61 | ||
1da177e4 LT |
62 | /* |
63 | * Is the SiS APIC rmw bug present ? | |
64 | * -1 = don't know, 0 = no, 1 = yes | |
65 | */ | |
66 | int sis_apic_bug = -1; | |
67 | ||
68 | /* | |
69 | * # of IRQ routing registers | |
70 | */ | |
71 | int nr_ioapic_registers[MAX_IO_APICS]; | |
72 | ||
1a3f239d | 73 | static int disable_timer_pin_1 __initdata; |
66759a01 | 74 | |
1da177e4 LT |
75 | /* |
76 | * Rough estimation of how many shared IRQs there are, can | |
77 | * be changed anytime. | |
78 | */ | |
79 | #define MAX_PLUS_SHARED_IRQS NR_IRQS | |
80 | #define PIN_MAP_SIZE (MAX_PLUS_SHARED_IRQS + NR_IRQS) | |
81 | ||
82 | /* | |
83 | * This is performance-critical, we want to do it O(1) | |
84 | * | |
85 | * the indexing order of this array favors 1:1 mappings | |
86 | * between pins and IRQs. | |
87 | */ | |
88 | ||
89 | static struct irq_pin_list { | |
90 | int apic, pin, next; | |
91 | } irq_2_pin[PIN_MAP_SIZE]; | |
92 | ||
cf4c6a2f AK |
93 | union entry_union { |
94 | struct { u32 w1, w2; }; | |
95 | struct IO_APIC_route_entry entry; | |
96 | }; | |
97 | ||
98 | static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin) | |
99 | { | |
100 | union entry_union eu; | |
101 | unsigned long flags; | |
102 | spin_lock_irqsave(&ioapic_lock, flags); | |
103 | eu.w1 = io_apic_read(apic, 0x10 + 2 * pin); | |
104 | eu.w2 = io_apic_read(apic, 0x11 + 2 * pin); | |
105 | spin_unlock_irqrestore(&ioapic_lock, flags); | |
106 | return eu.entry; | |
107 | } | |
108 | ||
109 | static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e) | |
110 | { | |
111 | unsigned long flags; | |
112 | union entry_union eu; | |
113 | eu.entry = e; | |
114 | spin_lock_irqsave(&ioapic_lock, flags); | |
115 | io_apic_write(apic, 0x10 + 2*pin, eu.w1); | |
116 | io_apic_write(apic, 0x11 + 2*pin, eu.w2); | |
117 | spin_unlock_irqrestore(&ioapic_lock, flags); | |
118 | } | |
119 | ||
1da177e4 LT |
120 | /* |
121 | * The common case is 1:1 IRQ<->pin mappings. Sometimes there are | |
122 | * shared ISA-space IRQs, so we have to support them. We are super | |
123 | * fast in the common case, and fast for shared ISA-space IRQs. | |
124 | */ | |
125 | static void add_pin_to_irq(unsigned int irq, int apic, int pin) | |
126 | { | |
127 | static int first_free_entry = NR_IRQS; | |
128 | struct irq_pin_list *entry = irq_2_pin + irq; | |
129 | ||
130 | while (entry->next) | |
131 | entry = irq_2_pin + entry->next; | |
132 | ||
133 | if (entry->pin != -1) { | |
134 | entry->next = first_free_entry; | |
135 | entry = irq_2_pin + entry->next; | |
136 | if (++first_free_entry >= PIN_MAP_SIZE) | |
137 | panic("io_apic.c: whoops"); | |
138 | } | |
139 | entry->apic = apic; | |
140 | entry->pin = pin; | |
141 | } | |
142 | ||
143 | /* | |
144 | * Reroute an IRQ to a different pin. | |
145 | */ | |
146 | static void __init replace_pin_at_irq(unsigned int irq, | |
147 | int oldapic, int oldpin, | |
148 | int newapic, int newpin) | |
149 | { | |
150 | struct irq_pin_list *entry = irq_2_pin + irq; | |
151 | ||
152 | while (1) { | |
153 | if (entry->apic == oldapic && entry->pin == oldpin) { | |
154 | entry->apic = newapic; | |
155 | entry->pin = newpin; | |
156 | } | |
157 | if (!entry->next) | |
158 | break; | |
159 | entry = irq_2_pin + entry->next; | |
160 | } | |
161 | } | |
162 | ||
163 | static void __modify_IO_APIC_irq (unsigned int irq, unsigned long enable, unsigned long disable) | |
164 | { | |
165 | struct irq_pin_list *entry = irq_2_pin + irq; | |
166 | unsigned int pin, reg; | |
167 | ||
168 | for (;;) { | |
169 | pin = entry->pin; | |
170 | if (pin == -1) | |
171 | break; | |
172 | reg = io_apic_read(entry->apic, 0x10 + pin*2); | |
173 | reg &= ~disable; | |
174 | reg |= enable; | |
175 | io_apic_modify(entry->apic, 0x10 + pin*2, reg); | |
176 | if (!entry->next) | |
177 | break; | |
178 | entry = irq_2_pin + entry->next; | |
179 | } | |
180 | } | |
181 | ||
182 | /* mask = 1 */ | |
183 | static void __mask_IO_APIC_irq (unsigned int irq) | |
184 | { | |
185 | __modify_IO_APIC_irq(irq, 0x00010000, 0); | |
186 | } | |
187 | ||
188 | /* mask = 0 */ | |
189 | static void __unmask_IO_APIC_irq (unsigned int irq) | |
190 | { | |
191 | __modify_IO_APIC_irq(irq, 0, 0x00010000); | |
192 | } | |
193 | ||
194 | /* mask = 1, trigger = 0 */ | |
195 | static void __mask_and_edge_IO_APIC_irq (unsigned int irq) | |
196 | { | |
197 | __modify_IO_APIC_irq(irq, 0x00010000, 0x00008000); | |
198 | } | |
199 | ||
200 | /* mask = 0, trigger = 1 */ | |
201 | static void __unmask_and_level_IO_APIC_irq (unsigned int irq) | |
202 | { | |
203 | __modify_IO_APIC_irq(irq, 0x00008000, 0x00010000); | |
204 | } | |
205 | ||
206 | static void mask_IO_APIC_irq (unsigned int irq) | |
207 | { | |
208 | unsigned long flags; | |
209 | ||
210 | spin_lock_irqsave(&ioapic_lock, flags); | |
211 | __mask_IO_APIC_irq(irq); | |
212 | spin_unlock_irqrestore(&ioapic_lock, flags); | |
213 | } | |
214 | ||
215 | static void unmask_IO_APIC_irq (unsigned int irq) | |
216 | { | |
217 | unsigned long flags; | |
218 | ||
219 | spin_lock_irqsave(&ioapic_lock, flags); | |
220 | __unmask_IO_APIC_irq(irq); | |
221 | spin_unlock_irqrestore(&ioapic_lock, flags); | |
222 | } | |
223 | ||
224 | static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) | |
225 | { | |
226 | struct IO_APIC_route_entry entry; | |
1da177e4 LT |
227 | |
228 | /* Check delivery_mode to be sure we're not clearing an SMI pin */ | |
cf4c6a2f | 229 | entry = ioapic_read_entry(apic, pin); |
1da177e4 LT |
230 | if (entry.delivery_mode == dest_SMI) |
231 | return; | |
232 | ||
233 | /* | |
234 | * Disable it in the IO-APIC irq-routing table: | |
235 | */ | |
236 | memset(&entry, 0, sizeof(entry)); | |
237 | entry.mask = 1; | |
cf4c6a2f | 238 | ioapic_write_entry(apic, pin, entry); |
1da177e4 LT |
239 | } |
240 | ||
241 | static void clear_IO_APIC (void) | |
242 | { | |
243 | int apic, pin; | |
244 | ||
245 | for (apic = 0; apic < nr_ioapics; apic++) | |
246 | for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) | |
247 | clear_IO_APIC_pin(apic, pin); | |
248 | } | |
249 | ||
54d5d424 | 250 | #ifdef CONFIG_SMP |
1da177e4 LT |
251 | static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask) |
252 | { | |
253 | unsigned long flags; | |
254 | int pin; | |
255 | struct irq_pin_list *entry = irq_2_pin + irq; | |
256 | unsigned int apicid_value; | |
54d5d424 | 257 | cpumask_t tmp; |
1da177e4 | 258 | |
54d5d424 AR |
259 | cpus_and(tmp, cpumask, cpu_online_map); |
260 | if (cpus_empty(tmp)) | |
261 | tmp = TARGET_CPUS; | |
262 | ||
263 | cpus_and(cpumask, tmp, CPU_MASK_ALL); | |
264 | ||
1da177e4 LT |
265 | apicid_value = cpu_mask_to_apicid(cpumask); |
266 | /* Prepare to do the io_apic_write */ | |
267 | apicid_value = apicid_value << 24; | |
268 | spin_lock_irqsave(&ioapic_lock, flags); | |
269 | for (;;) { | |
270 | pin = entry->pin; | |
271 | if (pin == -1) | |
272 | break; | |
273 | io_apic_write(entry->apic, 0x10 + 1 + pin*2, apicid_value); | |
274 | if (!entry->next) | |
275 | break; | |
276 | entry = irq_2_pin + entry->next; | |
277 | } | |
ace80ab7 | 278 | set_native_irq_info(irq, cpumask); |
1da177e4 LT |
279 | spin_unlock_irqrestore(&ioapic_lock, flags); |
280 | } | |
281 | ||
282 | #if defined(CONFIG_IRQBALANCE) | |
283 | # include <asm/processor.h> /* kernel_thread() */ | |
284 | # include <linux/kernel_stat.h> /* kstat */ | |
285 | # include <linux/slab.h> /* kmalloc() */ | |
286 | # include <linux/timer.h> /* time_after() */ | |
287 | ||
1b61b910 | 288 | #ifdef CONFIG_BALANCED_IRQ_DEBUG |
1da177e4 LT |
289 | # define TDprintk(x...) do { printk("<%ld:%s:%d>: ", jiffies, __FILE__, __LINE__); printk(x); } while (0) |
290 | # define Dprintk(x...) do { TDprintk(x); } while (0) | |
291 | # else | |
292 | # define TDprintk(x...) | |
293 | # define Dprintk(x...) | |
294 | # endif | |
295 | ||
1da177e4 | 296 | #define IRQBALANCE_CHECK_ARCH -999 |
1b61b910 ZY |
297 | #define MAX_BALANCED_IRQ_INTERVAL (5*HZ) |
298 | #define MIN_BALANCED_IRQ_INTERVAL (HZ/2) | |
299 | #define BALANCED_IRQ_MORE_DELTA (HZ/10) | |
300 | #define BALANCED_IRQ_LESS_DELTA (HZ) | |
301 | ||
302 | static int irqbalance_disabled __read_mostly = IRQBALANCE_CHECK_ARCH; | |
303 | static int physical_balance __read_mostly; | |
304 | static long balanced_irq_interval __read_mostly = MAX_BALANCED_IRQ_INTERVAL; | |
1da177e4 LT |
305 | |
306 | static struct irq_cpu_info { | |
307 | unsigned long * last_irq; | |
308 | unsigned long * irq_delta; | |
309 | unsigned long irq; | |
310 | } irq_cpu_data[NR_CPUS]; | |
311 | ||
312 | #define CPU_IRQ(cpu) (irq_cpu_data[cpu].irq) | |
313 | #define LAST_CPU_IRQ(cpu,irq) (irq_cpu_data[cpu].last_irq[irq]) | |
314 | #define IRQ_DELTA(cpu,irq) (irq_cpu_data[cpu].irq_delta[irq]) | |
315 | ||
316 | #define IDLE_ENOUGH(cpu,now) \ | |
317 | (idle_cpu(cpu) && ((now) - per_cpu(irq_stat, (cpu)).idle_timestamp > 1)) | |
318 | ||
319 | #define IRQ_ALLOWED(cpu, allowed_mask) cpu_isset(cpu, allowed_mask) | |
320 | ||
321 | #define CPU_TO_PACKAGEINDEX(i) (first_cpu(cpu_sibling_map[i])) | |
322 | ||
1b61b910 ZY |
323 | static cpumask_t balance_irq_affinity[NR_IRQS] = { |
324 | [0 ... NR_IRQS-1] = CPU_MASK_ALL | |
325 | }; | |
1da177e4 | 326 | |
1b61b910 ZY |
327 | void set_balance_irq_affinity(unsigned int irq, cpumask_t mask) |
328 | { | |
329 | balance_irq_affinity[irq] = mask; | |
330 | } | |
1da177e4 LT |
331 | |
332 | static unsigned long move(int curr_cpu, cpumask_t allowed_mask, | |
333 | unsigned long now, int direction) | |
334 | { | |
335 | int search_idle = 1; | |
336 | int cpu = curr_cpu; | |
337 | ||
338 | goto inside; | |
339 | ||
340 | do { | |
341 | if (unlikely(cpu == curr_cpu)) | |
342 | search_idle = 0; | |
343 | inside: | |
344 | if (direction == 1) { | |
345 | cpu++; | |
346 | if (cpu >= NR_CPUS) | |
347 | cpu = 0; | |
348 | } else { | |
349 | cpu--; | |
350 | if (cpu == -1) | |
351 | cpu = NR_CPUS-1; | |
352 | } | |
353 | } while (!cpu_online(cpu) || !IRQ_ALLOWED(cpu,allowed_mask) || | |
354 | (search_idle && !IDLE_ENOUGH(cpu,now))); | |
355 | ||
356 | return cpu; | |
357 | } | |
358 | ||
359 | static inline void balance_irq(int cpu, int irq) | |
360 | { | |
361 | unsigned long now = jiffies; | |
362 | cpumask_t allowed_mask; | |
363 | unsigned int new_cpu; | |
364 | ||
365 | if (irqbalance_disabled) | |
366 | return; | |
367 | ||
1b61b910 | 368 | cpus_and(allowed_mask, cpu_online_map, balance_irq_affinity[irq]); |
1da177e4 LT |
369 | new_cpu = move(cpu, allowed_mask, now, 1); |
370 | if (cpu != new_cpu) { | |
54d5d424 | 371 | set_pending_irq(irq, cpumask_of_cpu(new_cpu)); |
1da177e4 LT |
372 | } |
373 | } | |
374 | ||
375 | static inline void rotate_irqs_among_cpus(unsigned long useful_load_threshold) | |
376 | { | |
377 | int i, j; | |
378 | Dprintk("Rotating IRQs among CPUs.\n"); | |
394e3902 AM |
379 | for_each_online_cpu(i) { |
380 | for (j = 0; j < NR_IRQS; j++) { | |
1da177e4 LT |
381 | if (!irq_desc[j].action) |
382 | continue; | |
383 | /* Is it a significant load ? */ | |
384 | if (IRQ_DELTA(CPU_TO_PACKAGEINDEX(i),j) < | |
385 | useful_load_threshold) | |
386 | continue; | |
387 | balance_irq(i, j); | |
388 | } | |
389 | } | |
390 | balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL, | |
391 | balanced_irq_interval - BALANCED_IRQ_LESS_DELTA); | |
392 | return; | |
393 | } | |
394 | ||
395 | static void do_irq_balance(void) | |
396 | { | |
397 | int i, j; | |
398 | unsigned long max_cpu_irq = 0, min_cpu_irq = (~0); | |
399 | unsigned long move_this_load = 0; | |
400 | int max_loaded = 0, min_loaded = 0; | |
401 | int load; | |
402 | unsigned long useful_load_threshold = balanced_irq_interval + 10; | |
403 | int selected_irq; | |
404 | int tmp_loaded, first_attempt = 1; | |
405 | unsigned long tmp_cpu_irq; | |
406 | unsigned long imbalance = 0; | |
407 | cpumask_t allowed_mask, target_cpu_mask, tmp; | |
408 | ||
c8912599 | 409 | for_each_possible_cpu(i) { |
1da177e4 LT |
410 | int package_index; |
411 | CPU_IRQ(i) = 0; | |
412 | if (!cpu_online(i)) | |
413 | continue; | |
414 | package_index = CPU_TO_PACKAGEINDEX(i); | |
415 | for (j = 0; j < NR_IRQS; j++) { | |
416 | unsigned long value_now, delta; | |
417 | /* Is this an active IRQ? */ | |
418 | if (!irq_desc[j].action) | |
419 | continue; | |
420 | if ( package_index == i ) | |
421 | IRQ_DELTA(package_index,j) = 0; | |
422 | /* Determine the total count per processor per IRQ */ | |
423 | value_now = (unsigned long) kstat_cpu(i).irqs[j]; | |
424 | ||
425 | /* Determine the activity per processor per IRQ */ | |
426 | delta = value_now - LAST_CPU_IRQ(i,j); | |
427 | ||
428 | /* Update last_cpu_irq[][] for the next time */ | |
429 | LAST_CPU_IRQ(i,j) = value_now; | |
430 | ||
431 | /* Ignore IRQs whose rate is less than the clock */ | |
432 | if (delta < useful_load_threshold) | |
433 | continue; | |
434 | /* update the load for the processor or package total */ | |
435 | IRQ_DELTA(package_index,j) += delta; | |
436 | ||
437 | /* Keep track of the higher numbered sibling as well */ | |
438 | if (i != package_index) | |
439 | CPU_IRQ(i) += delta; | |
440 | /* | |
441 | * We have sibling A and sibling B in the package | |
442 | * | |
443 | * cpu_irq[A] = load for cpu A + load for cpu B | |
444 | * cpu_irq[B] = load for cpu B | |
445 | */ | |
446 | CPU_IRQ(package_index) += delta; | |
447 | } | |
448 | } | |
449 | /* Find the least loaded processor package */ | |
394e3902 | 450 | for_each_online_cpu(i) { |
1da177e4 LT |
451 | if (i != CPU_TO_PACKAGEINDEX(i)) |
452 | continue; | |
453 | if (min_cpu_irq > CPU_IRQ(i)) { | |
454 | min_cpu_irq = CPU_IRQ(i); | |
455 | min_loaded = i; | |
456 | } | |
457 | } | |
458 | max_cpu_irq = ULONG_MAX; | |
459 | ||
460 | tryanothercpu: | |
461 | /* Look for heaviest loaded processor. | |
462 | * We may come back to get the next heaviest loaded processor. | |
463 | * Skip processors with trivial loads. | |
464 | */ | |
465 | tmp_cpu_irq = 0; | |
466 | tmp_loaded = -1; | |
394e3902 | 467 | for_each_online_cpu(i) { |
1da177e4 LT |
468 | if (i != CPU_TO_PACKAGEINDEX(i)) |
469 | continue; | |
470 | if (max_cpu_irq <= CPU_IRQ(i)) | |
471 | continue; | |
472 | if (tmp_cpu_irq < CPU_IRQ(i)) { | |
473 | tmp_cpu_irq = CPU_IRQ(i); | |
474 | tmp_loaded = i; | |
475 | } | |
476 | } | |
477 | ||
478 | if (tmp_loaded == -1) { | |
479 | /* In the case of small number of heavy interrupt sources, | |
480 | * loading some of the cpus too much. We use Ingo's original | |
481 | * approach to rotate them around. | |
482 | */ | |
483 | if (!first_attempt && imbalance >= useful_load_threshold) { | |
484 | rotate_irqs_among_cpus(useful_load_threshold); | |
485 | return; | |
486 | } | |
487 | goto not_worth_the_effort; | |
488 | } | |
489 | ||
490 | first_attempt = 0; /* heaviest search */ | |
491 | max_cpu_irq = tmp_cpu_irq; /* load */ | |
492 | max_loaded = tmp_loaded; /* processor */ | |
493 | imbalance = (max_cpu_irq - min_cpu_irq) / 2; | |
494 | ||
495 | Dprintk("max_loaded cpu = %d\n", max_loaded); | |
496 | Dprintk("min_loaded cpu = %d\n", min_loaded); | |
497 | Dprintk("max_cpu_irq load = %ld\n", max_cpu_irq); | |
498 | Dprintk("min_cpu_irq load = %ld\n", min_cpu_irq); | |
499 | Dprintk("load imbalance = %lu\n", imbalance); | |
500 | ||
501 | /* if imbalance is less than approx 10% of max load, then | |
502 | * observe diminishing returns action. - quit | |
503 | */ | |
504 | if (imbalance < (max_cpu_irq >> 3)) { | |
505 | Dprintk("Imbalance too trivial\n"); | |
506 | goto not_worth_the_effort; | |
507 | } | |
508 | ||
509 | tryanotherirq: | |
510 | /* if we select an IRQ to move that can't go where we want, then | |
511 | * see if there is another one to try. | |
512 | */ | |
513 | move_this_load = 0; | |
514 | selected_irq = -1; | |
515 | for (j = 0; j < NR_IRQS; j++) { | |
516 | /* Is this an active IRQ? */ | |
517 | if (!irq_desc[j].action) | |
518 | continue; | |
519 | if (imbalance <= IRQ_DELTA(max_loaded,j)) | |
520 | continue; | |
521 | /* Try to find the IRQ that is closest to the imbalance | |
522 | * without going over. | |
523 | */ | |
524 | if (move_this_load < IRQ_DELTA(max_loaded,j)) { | |
525 | move_this_load = IRQ_DELTA(max_loaded,j); | |
526 | selected_irq = j; | |
527 | } | |
528 | } | |
529 | if (selected_irq == -1) { | |
530 | goto tryanothercpu; | |
531 | } | |
532 | ||
533 | imbalance = move_this_load; | |
534 | ||
535 | /* For physical_balance case, we accumlated both load | |
536 | * values in the one of the siblings cpu_irq[], | |
537 | * to use the same code for physical and logical processors | |
538 | * as much as possible. | |
539 | * | |
540 | * NOTE: the cpu_irq[] array holds the sum of the load for | |
541 | * sibling A and sibling B in the slot for the lowest numbered | |
542 | * sibling (A), _AND_ the load for sibling B in the slot for | |
543 | * the higher numbered sibling. | |
544 | * | |
545 | * We seek the least loaded sibling by making the comparison | |
546 | * (A+B)/2 vs B | |
547 | */ | |
548 | load = CPU_IRQ(min_loaded) >> 1; | |
549 | for_each_cpu_mask(j, cpu_sibling_map[min_loaded]) { | |
550 | if (load > CPU_IRQ(j)) { | |
551 | /* This won't change cpu_sibling_map[min_loaded] */ | |
552 | load = CPU_IRQ(j); | |
553 | min_loaded = j; | |
554 | } | |
555 | } | |
556 | ||
1b61b910 ZY |
557 | cpus_and(allowed_mask, |
558 | cpu_online_map, | |
559 | balance_irq_affinity[selected_irq]); | |
1da177e4 LT |
560 | target_cpu_mask = cpumask_of_cpu(min_loaded); |
561 | cpus_and(tmp, target_cpu_mask, allowed_mask); | |
562 | ||
563 | if (!cpus_empty(tmp)) { | |
1da177e4 LT |
564 | |
565 | Dprintk("irq = %d moved to cpu = %d\n", | |
566 | selected_irq, min_loaded); | |
567 | /* mark for change destination */ | |
54d5d424 AR |
568 | set_pending_irq(selected_irq, cpumask_of_cpu(min_loaded)); |
569 | ||
1da177e4 LT |
570 | /* Since we made a change, come back sooner to |
571 | * check for more variation. | |
572 | */ | |
573 | balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL, | |
574 | balanced_irq_interval - BALANCED_IRQ_LESS_DELTA); | |
575 | return; | |
576 | } | |
577 | goto tryanotherirq; | |
578 | ||
579 | not_worth_the_effort: | |
580 | /* | |
581 | * if we did not find an IRQ to move, then adjust the time interval | |
582 | * upward | |
583 | */ | |
584 | balanced_irq_interval = min((long)MAX_BALANCED_IRQ_INTERVAL, | |
585 | balanced_irq_interval + BALANCED_IRQ_MORE_DELTA); | |
586 | Dprintk("IRQ worth rotating not found\n"); | |
587 | return; | |
588 | } | |
589 | ||
590 | static int balanced_irq(void *unused) | |
591 | { | |
592 | int i; | |
593 | unsigned long prev_balance_time = jiffies; | |
594 | long time_remaining = balanced_irq_interval; | |
595 | ||
596 | daemonize("kirqd"); | |
597 | ||
598 | /* push everything to CPU 0 to give us a starting point. */ | |
599 | for (i = 0 ; i < NR_IRQS ; i++) { | |
cd916d31 | 600 | irq_desc[i].pending_mask = cpumask_of_cpu(0); |
54d5d424 | 601 | set_pending_irq(i, cpumask_of_cpu(0)); |
1da177e4 LT |
602 | } |
603 | ||
604 | for ( ; ; ) { | |
52e6e630 | 605 | time_remaining = schedule_timeout_interruptible(time_remaining); |
3e1d1d28 | 606 | try_to_freeze(); |
1da177e4 LT |
607 | if (time_after(jiffies, |
608 | prev_balance_time+balanced_irq_interval)) { | |
f3705136 | 609 | preempt_disable(); |
1da177e4 LT |
610 | do_irq_balance(); |
611 | prev_balance_time = jiffies; | |
612 | time_remaining = balanced_irq_interval; | |
f3705136 | 613 | preempt_enable(); |
1da177e4 LT |
614 | } |
615 | } | |
616 | return 0; | |
617 | } | |
618 | ||
619 | static int __init balanced_irq_init(void) | |
620 | { | |
621 | int i; | |
622 | struct cpuinfo_x86 *c; | |
623 | cpumask_t tmp; | |
624 | ||
625 | cpus_shift_right(tmp, cpu_online_map, 2); | |
626 | c = &boot_cpu_data; | |
627 | /* When not overwritten by the command line ask subarchitecture. */ | |
628 | if (irqbalance_disabled == IRQBALANCE_CHECK_ARCH) | |
629 | irqbalance_disabled = NO_BALANCE_IRQ; | |
630 | if (irqbalance_disabled) | |
631 | return 0; | |
632 | ||
633 | /* disable irqbalance completely if there is only one processor online */ | |
634 | if (num_online_cpus() < 2) { | |
635 | irqbalance_disabled = 1; | |
636 | return 0; | |
637 | } | |
638 | /* | |
639 | * Enable physical balance only if more than 1 physical processor | |
640 | * is present | |
641 | */ | |
642 | if (smp_num_siblings > 1 && !cpus_empty(tmp)) | |
643 | physical_balance = 1; | |
644 | ||
394e3902 | 645 | for_each_online_cpu(i) { |
1da177e4 LT |
646 | irq_cpu_data[i].irq_delta = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); |
647 | irq_cpu_data[i].last_irq = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); | |
648 | if (irq_cpu_data[i].irq_delta == NULL || irq_cpu_data[i].last_irq == NULL) { | |
649 | printk(KERN_ERR "balanced_irq_init: out of memory"); | |
650 | goto failed; | |
651 | } | |
652 | memset(irq_cpu_data[i].irq_delta,0,sizeof(unsigned long) * NR_IRQS); | |
653 | memset(irq_cpu_data[i].last_irq,0,sizeof(unsigned long) * NR_IRQS); | |
654 | } | |
655 | ||
656 | printk(KERN_INFO "Starting balanced_irq\n"); | |
657 | if (kernel_thread(balanced_irq, NULL, CLONE_KERNEL) >= 0) | |
658 | return 0; | |
659 | else | |
660 | printk(KERN_ERR "balanced_irq_init: failed to spawn balanced_irq"); | |
661 | failed: | |
c8912599 | 662 | for_each_possible_cpu(i) { |
4ae6673e | 663 | kfree(irq_cpu_data[i].irq_delta); |
394e3902 | 664 | irq_cpu_data[i].irq_delta = NULL; |
4ae6673e | 665 | kfree(irq_cpu_data[i].last_irq); |
394e3902 | 666 | irq_cpu_data[i].last_irq = NULL; |
1da177e4 LT |
667 | } |
668 | return 0; | |
669 | } | |
670 | ||
671 | int __init irqbalance_disable(char *str) | |
672 | { | |
673 | irqbalance_disabled = 1; | |
9b41046c | 674 | return 1; |
1da177e4 LT |
675 | } |
676 | ||
677 | __setup("noirqbalance", irqbalance_disable); | |
678 | ||
1da177e4 | 679 | late_initcall(balanced_irq_init); |
1da177e4 | 680 | #endif /* CONFIG_IRQBALANCE */ |
54d5d424 | 681 | #endif /* CONFIG_SMP */ |
1da177e4 LT |
682 | |
683 | #ifndef CONFIG_SMP | |
684 | void fastcall send_IPI_self(int vector) | |
685 | { | |
686 | unsigned int cfg; | |
687 | ||
688 | /* | |
689 | * Wait for idle. | |
690 | */ | |
691 | apic_wait_icr_idle(); | |
692 | cfg = APIC_DM_FIXED | APIC_DEST_SELF | vector | APIC_DEST_LOGICAL; | |
693 | /* | |
694 | * Send the IPI. The write to APIC_ICR fires this off. | |
695 | */ | |
696 | apic_write_around(APIC_ICR, cfg); | |
697 | } | |
698 | #endif /* !CONFIG_SMP */ | |
699 | ||
700 | ||
701 | /* | |
702 | * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to | |
703 | * specific CPU-side IRQs. | |
704 | */ | |
705 | ||
706 | #define MAX_PIRQS 8 | |
707 | static int pirq_entries [MAX_PIRQS]; | |
708 | static int pirqs_enabled; | |
709 | int skip_ioapic_setup; | |
710 | ||
711 | static int __init ioapic_setup(char *str) | |
712 | { | |
713 | skip_ioapic_setup = 1; | |
714 | return 1; | |
715 | } | |
716 | ||
717 | __setup("noapic", ioapic_setup); | |
718 | ||
719 | static int __init ioapic_pirq_setup(char *str) | |
720 | { | |
721 | int i, max; | |
722 | int ints[MAX_PIRQS+1]; | |
723 | ||
724 | get_options(str, ARRAY_SIZE(ints), ints); | |
725 | ||
726 | for (i = 0; i < MAX_PIRQS; i++) | |
727 | pirq_entries[i] = -1; | |
728 | ||
729 | pirqs_enabled = 1; | |
730 | apic_printk(APIC_VERBOSE, KERN_INFO | |
731 | "PIRQ redirection, working around broken MP-BIOS.\n"); | |
732 | max = MAX_PIRQS; | |
733 | if (ints[0] < MAX_PIRQS) | |
734 | max = ints[0]; | |
735 | ||
736 | for (i = 0; i < max; i++) { | |
737 | apic_printk(APIC_VERBOSE, KERN_DEBUG | |
738 | "... PIRQ%d -> IRQ %d\n", i, ints[i+1]); | |
739 | /* | |
740 | * PIRQs are mapped upside down, usually. | |
741 | */ | |
742 | pirq_entries[MAX_PIRQS-i-1] = ints[i+1]; | |
743 | } | |
744 | return 1; | |
745 | } | |
746 | ||
747 | __setup("pirq=", ioapic_pirq_setup); | |
748 | ||
749 | /* | |
750 | * Find the IRQ entry number of a certain pin. | |
751 | */ | |
752 | static int find_irq_entry(int apic, int pin, int type) | |
753 | { | |
754 | int i; | |
755 | ||
756 | for (i = 0; i < mp_irq_entries; i++) | |
757 | if (mp_irqs[i].mpc_irqtype == type && | |
758 | (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid || | |
759 | mp_irqs[i].mpc_dstapic == MP_APIC_ALL) && | |
760 | mp_irqs[i].mpc_dstirq == pin) | |
761 | return i; | |
762 | ||
763 | return -1; | |
764 | } | |
765 | ||
766 | /* | |
767 | * Find the pin to which IRQ[irq] (ISA) is connected | |
768 | */ | |
fcfd636a | 769 | static int __init find_isa_irq_pin(int irq, int type) |
1da177e4 LT |
770 | { |
771 | int i; | |
772 | ||
773 | for (i = 0; i < mp_irq_entries; i++) { | |
774 | int lbus = mp_irqs[i].mpc_srcbus; | |
775 | ||
776 | if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA || | |
777 | mp_bus_id_to_type[lbus] == MP_BUS_EISA || | |
778 | mp_bus_id_to_type[lbus] == MP_BUS_MCA || | |
779 | mp_bus_id_to_type[lbus] == MP_BUS_NEC98 | |
780 | ) && | |
781 | (mp_irqs[i].mpc_irqtype == type) && | |
782 | (mp_irqs[i].mpc_srcbusirq == irq)) | |
783 | ||
784 | return mp_irqs[i].mpc_dstirq; | |
785 | } | |
786 | return -1; | |
787 | } | |
788 | ||
fcfd636a EB |
789 | static int __init find_isa_irq_apic(int irq, int type) |
790 | { | |
791 | int i; | |
792 | ||
793 | for (i = 0; i < mp_irq_entries; i++) { | |
794 | int lbus = mp_irqs[i].mpc_srcbus; | |
795 | ||
796 | if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA || | |
797 | mp_bus_id_to_type[lbus] == MP_BUS_EISA || | |
798 | mp_bus_id_to_type[lbus] == MP_BUS_MCA || | |
799 | mp_bus_id_to_type[lbus] == MP_BUS_NEC98 | |
800 | ) && | |
801 | (mp_irqs[i].mpc_irqtype == type) && | |
802 | (mp_irqs[i].mpc_srcbusirq == irq)) | |
803 | break; | |
804 | } | |
805 | if (i < mp_irq_entries) { | |
806 | int apic; | |
807 | for(apic = 0; apic < nr_ioapics; apic++) { | |
808 | if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic) | |
809 | return apic; | |
810 | } | |
811 | } | |
812 | ||
813 | return -1; | |
814 | } | |
815 | ||
1da177e4 LT |
816 | /* |
817 | * Find a specific PCI IRQ entry. | |
818 | * Not an __init, possibly needed by modules | |
819 | */ | |
820 | static int pin_2_irq(int idx, int apic, int pin); | |
821 | ||
822 | int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) | |
823 | { | |
824 | int apic, i, best_guess = -1; | |
825 | ||
826 | apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, " | |
827 | "slot:%d, pin:%d.\n", bus, slot, pin); | |
828 | if (mp_bus_id_to_pci_bus[bus] == -1) { | |
829 | printk(KERN_WARNING "PCI BIOS passed nonexistent PCI bus %d!\n", bus); | |
830 | return -1; | |
831 | } | |
832 | for (i = 0; i < mp_irq_entries; i++) { | |
833 | int lbus = mp_irqs[i].mpc_srcbus; | |
834 | ||
835 | for (apic = 0; apic < nr_ioapics; apic++) | |
836 | if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic || | |
837 | mp_irqs[i].mpc_dstapic == MP_APIC_ALL) | |
838 | break; | |
839 | ||
840 | if ((mp_bus_id_to_type[lbus] == MP_BUS_PCI) && | |
841 | !mp_irqs[i].mpc_irqtype && | |
842 | (bus == lbus) && | |
843 | (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) { | |
844 | int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq); | |
845 | ||
846 | if (!(apic || IO_APIC_IRQ(irq))) | |
847 | continue; | |
848 | ||
849 | if (pin == (mp_irqs[i].mpc_srcbusirq & 3)) | |
850 | return irq; | |
851 | /* | |
852 | * Use the first all-but-pin matching entry as a | |
853 | * best-guess fuzzy result for broken mptables. | |
854 | */ | |
855 | if (best_guess < 0) | |
856 | best_guess = irq; | |
857 | } | |
858 | } | |
859 | return best_guess; | |
860 | } | |
129f6946 | 861 | EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector); |
1da177e4 LT |
862 | |
863 | /* | |
864 | * This function currently is only a helper for the i386 smp boot process where | |
865 | * we need to reprogram the ioredtbls to cater for the cpus which have come online | |
866 | * so mask in all cases should simply be TARGET_CPUS | |
867 | */ | |
54d5d424 | 868 | #ifdef CONFIG_SMP |
1da177e4 LT |
869 | void __init setup_ioapic_dest(void) |
870 | { | |
871 | int pin, ioapic, irq, irq_entry; | |
872 | ||
873 | if (skip_ioapic_setup == 1) | |
874 | return; | |
875 | ||
876 | for (ioapic = 0; ioapic < nr_ioapics; ioapic++) { | |
877 | for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) { | |
878 | irq_entry = find_irq_entry(ioapic, pin, mp_INT); | |
879 | if (irq_entry == -1) | |
880 | continue; | |
881 | irq = pin_2_irq(irq_entry, ioapic, pin); | |
882 | set_ioapic_affinity_irq(irq, TARGET_CPUS); | |
883 | } | |
884 | ||
885 | } | |
886 | } | |
54d5d424 | 887 | #endif |
1da177e4 LT |
888 | |
889 | /* | |
890 | * EISA Edge/Level control register, ELCR | |
891 | */ | |
892 | static int EISA_ELCR(unsigned int irq) | |
893 | { | |
894 | if (irq < 16) { | |
895 | unsigned int port = 0x4d0 + (irq >> 3); | |
896 | return (inb(port) >> (irq & 7)) & 1; | |
897 | } | |
898 | apic_printk(APIC_VERBOSE, KERN_INFO | |
899 | "Broken MPtable reports ISA irq %d\n", irq); | |
900 | return 0; | |
901 | } | |
902 | ||
903 | /* EISA interrupts are always polarity zero and can be edge or level | |
904 | * trigger depending on the ELCR value. If an interrupt is listed as | |
905 | * EISA conforming in the MP table, that means its trigger type must | |
906 | * be read in from the ELCR */ | |
907 | ||
908 | #define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].mpc_srcbusirq)) | |
909 | #define default_EISA_polarity(idx) (0) | |
910 | ||
911 | /* ISA interrupts are always polarity zero edge triggered, | |
912 | * when listed as conforming in the MP table. */ | |
913 | ||
914 | #define default_ISA_trigger(idx) (0) | |
915 | #define default_ISA_polarity(idx) (0) | |
916 | ||
917 | /* PCI interrupts are always polarity one level triggered, | |
918 | * when listed as conforming in the MP table. */ | |
919 | ||
920 | #define default_PCI_trigger(idx) (1) | |
921 | #define default_PCI_polarity(idx) (1) | |
922 | ||
923 | /* MCA interrupts are always polarity zero level triggered, | |
924 | * when listed as conforming in the MP table. */ | |
925 | ||
926 | #define default_MCA_trigger(idx) (1) | |
927 | #define default_MCA_polarity(idx) (0) | |
928 | ||
929 | /* NEC98 interrupts are always polarity zero edge triggered, | |
930 | * when listed as conforming in the MP table. */ | |
931 | ||
932 | #define default_NEC98_trigger(idx) (0) | |
933 | #define default_NEC98_polarity(idx) (0) | |
934 | ||
935 | static int __init MPBIOS_polarity(int idx) | |
936 | { | |
937 | int bus = mp_irqs[idx].mpc_srcbus; | |
938 | int polarity; | |
939 | ||
940 | /* | |
941 | * Determine IRQ line polarity (high active or low active): | |
942 | */ | |
943 | switch (mp_irqs[idx].mpc_irqflag & 3) | |
944 | { | |
945 | case 0: /* conforms, ie. bus-type dependent polarity */ | |
946 | { | |
947 | switch (mp_bus_id_to_type[bus]) | |
948 | { | |
949 | case MP_BUS_ISA: /* ISA pin */ | |
950 | { | |
951 | polarity = default_ISA_polarity(idx); | |
952 | break; | |
953 | } | |
954 | case MP_BUS_EISA: /* EISA pin */ | |
955 | { | |
956 | polarity = default_EISA_polarity(idx); | |
957 | break; | |
958 | } | |
959 | case MP_BUS_PCI: /* PCI pin */ | |
960 | { | |
961 | polarity = default_PCI_polarity(idx); | |
962 | break; | |
963 | } | |
964 | case MP_BUS_MCA: /* MCA pin */ | |
965 | { | |
966 | polarity = default_MCA_polarity(idx); | |
967 | break; | |
968 | } | |
969 | case MP_BUS_NEC98: /* NEC 98 pin */ | |
970 | { | |
971 | polarity = default_NEC98_polarity(idx); | |
972 | break; | |
973 | } | |
974 | default: | |
975 | { | |
976 | printk(KERN_WARNING "broken BIOS!!\n"); | |
977 | polarity = 1; | |
978 | break; | |
979 | } | |
980 | } | |
981 | break; | |
982 | } | |
983 | case 1: /* high active */ | |
984 | { | |
985 | polarity = 0; | |
986 | break; | |
987 | } | |
988 | case 2: /* reserved */ | |
989 | { | |
990 | printk(KERN_WARNING "broken BIOS!!\n"); | |
991 | polarity = 1; | |
992 | break; | |
993 | } | |
994 | case 3: /* low active */ | |
995 | { | |
996 | polarity = 1; | |
997 | break; | |
998 | } | |
999 | default: /* invalid */ | |
1000 | { | |
1001 | printk(KERN_WARNING "broken BIOS!!\n"); | |
1002 | polarity = 1; | |
1003 | break; | |
1004 | } | |
1005 | } | |
1006 | return polarity; | |
1007 | } | |
1008 | ||
1009 | static int MPBIOS_trigger(int idx) | |
1010 | { | |
1011 | int bus = mp_irqs[idx].mpc_srcbus; | |
1012 | int trigger; | |
1013 | ||
1014 | /* | |
1015 | * Determine IRQ trigger mode (edge or level sensitive): | |
1016 | */ | |
1017 | switch ((mp_irqs[idx].mpc_irqflag>>2) & 3) | |
1018 | { | |
1019 | case 0: /* conforms, ie. bus-type dependent */ | |
1020 | { | |
1021 | switch (mp_bus_id_to_type[bus]) | |
1022 | { | |
1023 | case MP_BUS_ISA: /* ISA pin */ | |
1024 | { | |
1025 | trigger = default_ISA_trigger(idx); | |
1026 | break; | |
1027 | } | |
1028 | case MP_BUS_EISA: /* EISA pin */ | |
1029 | { | |
1030 | trigger = default_EISA_trigger(idx); | |
1031 | break; | |
1032 | } | |
1033 | case MP_BUS_PCI: /* PCI pin */ | |
1034 | { | |
1035 | trigger = default_PCI_trigger(idx); | |
1036 | break; | |
1037 | } | |
1038 | case MP_BUS_MCA: /* MCA pin */ | |
1039 | { | |
1040 | trigger = default_MCA_trigger(idx); | |
1041 | break; | |
1042 | } | |
1043 | case MP_BUS_NEC98: /* NEC 98 pin */ | |
1044 | { | |
1045 | trigger = default_NEC98_trigger(idx); | |
1046 | break; | |
1047 | } | |
1048 | default: | |
1049 | { | |
1050 | printk(KERN_WARNING "broken BIOS!!\n"); | |
1051 | trigger = 1; | |
1052 | break; | |
1053 | } | |
1054 | } | |
1055 | break; | |
1056 | } | |
1057 | case 1: /* edge */ | |
1058 | { | |
1059 | trigger = 0; | |
1060 | break; | |
1061 | } | |
1062 | case 2: /* reserved */ | |
1063 | { | |
1064 | printk(KERN_WARNING "broken BIOS!!\n"); | |
1065 | trigger = 1; | |
1066 | break; | |
1067 | } | |
1068 | case 3: /* level */ | |
1069 | { | |
1070 | trigger = 1; | |
1071 | break; | |
1072 | } | |
1073 | default: /* invalid */ | |
1074 | { | |
1075 | printk(KERN_WARNING "broken BIOS!!\n"); | |
1076 | trigger = 0; | |
1077 | break; | |
1078 | } | |
1079 | } | |
1080 | return trigger; | |
1081 | } | |
1082 | ||
1083 | static inline int irq_polarity(int idx) | |
1084 | { | |
1085 | return MPBIOS_polarity(idx); | |
1086 | } | |
1087 | ||
1088 | static inline int irq_trigger(int idx) | |
1089 | { | |
1090 | return MPBIOS_trigger(idx); | |
1091 | } | |
1092 | ||
1093 | static int pin_2_irq(int idx, int apic, int pin) | |
1094 | { | |
1095 | int irq, i; | |
1096 | int bus = mp_irqs[idx].mpc_srcbus; | |
1097 | ||
1098 | /* | |
1099 | * Debugging check, we are in big trouble if this message pops up! | |
1100 | */ | |
1101 | if (mp_irqs[idx].mpc_dstirq != pin) | |
1102 | printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n"); | |
1103 | ||
1104 | switch (mp_bus_id_to_type[bus]) | |
1105 | { | |
1106 | case MP_BUS_ISA: /* ISA pin */ | |
1107 | case MP_BUS_EISA: | |
1108 | case MP_BUS_MCA: | |
1109 | case MP_BUS_NEC98: | |
1110 | { | |
1111 | irq = mp_irqs[idx].mpc_srcbusirq; | |
1112 | break; | |
1113 | } | |
1114 | case MP_BUS_PCI: /* PCI pin */ | |
1115 | { | |
1116 | /* | |
1117 | * PCI IRQs are mapped in order | |
1118 | */ | |
1119 | i = irq = 0; | |
1120 | while (i < apic) | |
1121 | irq += nr_ioapic_registers[i++]; | |
1122 | irq += pin; | |
1123 | ||
1124 | /* | |
1125 | * For MPS mode, so far only needed by ES7000 platform | |
1126 | */ | |
1127 | if (ioapic_renumber_irq) | |
1128 | irq = ioapic_renumber_irq(apic, irq); | |
1129 | ||
1130 | break; | |
1131 | } | |
1132 | default: | |
1133 | { | |
1134 | printk(KERN_ERR "unknown bus type %d.\n",bus); | |
1135 | irq = 0; | |
1136 | break; | |
1137 | } | |
1138 | } | |
1139 | ||
1140 | /* | |
1141 | * PCI IRQ command line redirection. Yes, limits are hardcoded. | |
1142 | */ | |
1143 | if ((pin >= 16) && (pin <= 23)) { | |
1144 | if (pirq_entries[pin-16] != -1) { | |
1145 | if (!pirq_entries[pin-16]) { | |
1146 | apic_printk(APIC_VERBOSE, KERN_DEBUG | |
1147 | "disabling PIRQ%d\n", pin-16); | |
1148 | } else { | |
1149 | irq = pirq_entries[pin-16]; | |
1150 | apic_printk(APIC_VERBOSE, KERN_DEBUG | |
1151 | "using PIRQ%d -> IRQ %d\n", | |
1152 | pin-16, irq); | |
1153 | } | |
1154 | } | |
1155 | } | |
1156 | return irq; | |
1157 | } | |
1158 | ||
1159 | static inline int IO_APIC_irq_trigger(int irq) | |
1160 | { | |
1161 | int apic, idx, pin; | |
1162 | ||
1163 | for (apic = 0; apic < nr_ioapics; apic++) { | |
1164 | for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { | |
1165 | idx = find_irq_entry(apic,pin,mp_INT); | |
1166 | if ((idx != -1) && (irq == pin_2_irq(idx,apic,pin))) | |
1167 | return irq_trigger(idx); | |
1168 | } | |
1169 | } | |
1170 | /* | |
1171 | * nonexistent IRQs are edge default | |
1172 | */ | |
1173 | return 0; | |
1174 | } | |
1175 | ||
1176 | /* irq_vectors is indexed by the sum of all RTEs in all I/O APICs. */ | |
6c231b7b | 1177 | u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = { FIRST_DEVICE_VECTOR , 0 }; |
1da177e4 | 1178 | |
ace80ab7 | 1179 | static int __assign_irq_vector(int irq) |
1da177e4 LT |
1180 | { |
1181 | static int current_vector = FIRST_DEVICE_VECTOR, offset = 0; | |
0a1ad60d | 1182 | int vector; |
1da177e4 | 1183 | |
ace80ab7 | 1184 | BUG_ON((unsigned)irq >= NR_IRQ_VECTORS); |
0a1ad60d | 1185 | |
ace80ab7 | 1186 | if (IO_APIC_VECTOR(irq) > 0) |
1da177e4 | 1187 | return IO_APIC_VECTOR(irq); |
ace80ab7 | 1188 | |
1da177e4 LT |
1189 | current_vector += 8; |
1190 | if (current_vector == SYSCALL_VECTOR) | |
ace80ab7 | 1191 | current_vector += 8; |
1da177e4 LT |
1192 | |
1193 | if (current_vector >= FIRST_SYSTEM_VECTOR) { | |
1194 | offset++; | |
ace80ab7 | 1195 | if (!(offset % 8)) |
1da177e4 LT |
1196 | return -ENOSPC; |
1197 | current_vector = FIRST_DEVICE_VECTOR + offset; | |
1198 | } | |
1199 | ||
0a1ad60d | 1200 | vector = current_vector; |
ace80ab7 EB |
1201 | IO_APIC_VECTOR(irq) = vector; |
1202 | ||
1203 | return vector; | |
1204 | } | |
0a1ad60d | 1205 | |
ace80ab7 EB |
1206 | static int assign_irq_vector(int irq) |
1207 | { | |
1208 | unsigned long flags; | |
1209 | int vector; | |
1210 | ||
1211 | spin_lock_irqsave(&vector_lock, flags); | |
1212 | vector = __assign_irq_vector(irq); | |
26a3c49c | 1213 | spin_unlock_irqrestore(&vector_lock, flags); |
1da177e4 | 1214 | |
0a1ad60d | 1215 | return vector; |
1da177e4 | 1216 | } |
f5b9ed7a | 1217 | static struct irq_chip ioapic_chip; |
1da177e4 LT |
1218 | |
1219 | #define IOAPIC_AUTO -1 | |
1220 | #define IOAPIC_EDGE 0 | |
1221 | #define IOAPIC_LEVEL 1 | |
1222 | ||
d1bef4ed | 1223 | static void ioapic_register_intr(int irq, int vector, unsigned long trigger) |
1da177e4 | 1224 | { |
6ebcc00e JB |
1225 | if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) || |
1226 | trigger == IOAPIC_LEVEL) | |
ace80ab7 | 1227 | set_irq_chip_and_handler(irq, &ioapic_chip, |
f5b9ed7a | 1228 | handle_fasteoi_irq); |
6ebcc00e | 1229 | else |
ace80ab7 | 1230 | set_irq_chip_and_handler(irq, &ioapic_chip, |
f5b9ed7a | 1231 | handle_edge_irq); |
ace80ab7 | 1232 | set_intr_gate(vector, interrupt[irq]); |
1da177e4 LT |
1233 | } |
1234 | ||
1235 | static void __init setup_IO_APIC_irqs(void) | |
1236 | { | |
1237 | struct IO_APIC_route_entry entry; | |
1238 | int apic, pin, idx, irq, first_notcon = 1, vector; | |
1239 | unsigned long flags; | |
1240 | ||
1241 | apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n"); | |
1242 | ||
1243 | for (apic = 0; apic < nr_ioapics; apic++) { | |
1244 | for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { | |
1245 | ||
1246 | /* | |
1247 | * add it to the IO-APIC irq-routing table: | |
1248 | */ | |
1249 | memset(&entry,0,sizeof(entry)); | |
1250 | ||
1251 | entry.delivery_mode = INT_DELIVERY_MODE; | |
1252 | entry.dest_mode = INT_DEST_MODE; | |
1253 | entry.mask = 0; /* enable IRQ */ | |
1254 | entry.dest.logical.logical_dest = | |
1255 | cpu_mask_to_apicid(TARGET_CPUS); | |
1256 | ||
1257 | idx = find_irq_entry(apic,pin,mp_INT); | |
1258 | if (idx == -1) { | |
1259 | if (first_notcon) { | |
1260 | apic_printk(APIC_VERBOSE, KERN_DEBUG | |
1261 | " IO-APIC (apicid-pin) %d-%d", | |
1262 | mp_ioapics[apic].mpc_apicid, | |
1263 | pin); | |
1264 | first_notcon = 0; | |
1265 | } else | |
1266 | apic_printk(APIC_VERBOSE, ", %d-%d", | |
1267 | mp_ioapics[apic].mpc_apicid, pin); | |
1268 | continue; | |
1269 | } | |
1270 | ||
1271 | entry.trigger = irq_trigger(idx); | |
1272 | entry.polarity = irq_polarity(idx); | |
1273 | ||
1274 | if (irq_trigger(idx)) { | |
1275 | entry.trigger = 1; | |
1276 | entry.mask = 1; | |
1277 | } | |
1278 | ||
1279 | irq = pin_2_irq(idx, apic, pin); | |
1280 | /* | |
1281 | * skip adding the timer int on secondary nodes, which causes | |
1282 | * a small but painful rift in the time-space continuum | |
1283 | */ | |
1284 | if (multi_timer_check(apic, irq)) | |
1285 | continue; | |
1286 | else | |
1287 | add_pin_to_irq(irq, apic, pin); | |
1288 | ||
1289 | if (!apic && !IO_APIC_IRQ(irq)) | |
1290 | continue; | |
1291 | ||
1292 | if (IO_APIC_IRQ(irq)) { | |
1293 | vector = assign_irq_vector(irq); | |
1294 | entry.vector = vector; | |
1295 | ioapic_register_intr(irq, vector, IOAPIC_AUTO); | |
1296 | ||
1297 | if (!apic && (irq < 16)) | |
1298 | disable_8259A_irq(irq); | |
1299 | } | |
cf4c6a2f | 1300 | ioapic_write_entry(apic, pin, entry); |
1da177e4 | 1301 | spin_lock_irqsave(&ioapic_lock, flags); |
54d5d424 | 1302 | set_native_irq_info(irq, TARGET_CPUS); |
1da177e4 LT |
1303 | spin_unlock_irqrestore(&ioapic_lock, flags); |
1304 | } | |
1305 | } | |
1306 | ||
1307 | if (!first_notcon) | |
1308 | apic_printk(APIC_VERBOSE, " not connected.\n"); | |
1309 | } | |
1310 | ||
1311 | /* | |
1312 | * Set up the 8259A-master output pin: | |
1313 | */ | |
fcfd636a | 1314 | static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector) |
1da177e4 LT |
1315 | { |
1316 | struct IO_APIC_route_entry entry; | |
1da177e4 LT |
1317 | |
1318 | memset(&entry,0,sizeof(entry)); | |
1319 | ||
1320 | disable_8259A_irq(0); | |
1321 | ||
1322 | /* mask LVT0 */ | |
1323 | apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); | |
1324 | ||
1325 | /* | |
1326 | * We use logical delivery to get the timer IRQ | |
1327 | * to the first CPU. | |
1328 | */ | |
1329 | entry.dest_mode = INT_DEST_MODE; | |
1330 | entry.mask = 0; /* unmask IRQ now */ | |
1331 | entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); | |
1332 | entry.delivery_mode = INT_DELIVERY_MODE; | |
1333 | entry.polarity = 0; | |
1334 | entry.trigger = 0; | |
1335 | entry.vector = vector; | |
1336 | ||
1337 | /* | |
1338 | * The timer IRQ doesn't have to know that behind the | |
1339 | * scene we have a 8259A-master in AEOI mode ... | |
1340 | */ | |
f5b9ed7a IM |
1341 | irq_desc[0].chip = &ioapic_chip; |
1342 | set_irq_handler(0, handle_edge_irq); | |
1da177e4 LT |
1343 | |
1344 | /* | |
1345 | * Add it to the IO-APIC irq-routing table: | |
1346 | */ | |
cf4c6a2f | 1347 | ioapic_write_entry(apic, pin, entry); |
1da177e4 LT |
1348 | |
1349 | enable_8259A_irq(0); | |
1350 | } | |
1351 | ||
1352 | static inline void UNEXPECTED_IO_APIC(void) | |
1353 | { | |
1354 | } | |
1355 | ||
1356 | void __init print_IO_APIC(void) | |
1357 | { | |
1358 | int apic, i; | |
1359 | union IO_APIC_reg_00 reg_00; | |
1360 | union IO_APIC_reg_01 reg_01; | |
1361 | union IO_APIC_reg_02 reg_02; | |
1362 | union IO_APIC_reg_03 reg_03; | |
1363 | unsigned long flags; | |
1364 | ||
1365 | if (apic_verbosity == APIC_QUIET) | |
1366 | return; | |
1367 | ||
1368 | printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); | |
1369 | for (i = 0; i < nr_ioapics; i++) | |
1370 | printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n", | |
1371 | mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]); | |
1372 | ||
1373 | /* | |
1374 | * We are a bit conservative about what we expect. We have to | |
1375 | * know about every hardware change ASAP. | |
1376 | */ | |
1377 | printk(KERN_INFO "testing the IO APIC.......................\n"); | |
1378 | ||
1379 | for (apic = 0; apic < nr_ioapics; apic++) { | |
1380 | ||
1381 | spin_lock_irqsave(&ioapic_lock, flags); | |
1382 | reg_00.raw = io_apic_read(apic, 0); | |
1383 | reg_01.raw = io_apic_read(apic, 1); | |
1384 | if (reg_01.bits.version >= 0x10) | |
1385 | reg_02.raw = io_apic_read(apic, 2); | |
1386 | if (reg_01.bits.version >= 0x20) | |
1387 | reg_03.raw = io_apic_read(apic, 3); | |
1388 | spin_unlock_irqrestore(&ioapic_lock, flags); | |
1389 | ||
1390 | printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid); | |
1391 | printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw); | |
1392 | printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID); | |
1393 | printk(KERN_DEBUG "....... : Delivery Type: %X\n", reg_00.bits.delivery_type); | |
1394 | printk(KERN_DEBUG "....... : LTS : %X\n", reg_00.bits.LTS); | |
1395 | if (reg_00.bits.ID >= get_physical_broadcast()) | |
1396 | UNEXPECTED_IO_APIC(); | |
1397 | if (reg_00.bits.__reserved_1 || reg_00.bits.__reserved_2) | |
1398 | UNEXPECTED_IO_APIC(); | |
1399 | ||
1400 | printk(KERN_DEBUG ".... register #01: %08X\n", reg_01.raw); | |
1401 | printk(KERN_DEBUG "....... : max redirection entries: %04X\n", reg_01.bits.entries); | |
1402 | if ( (reg_01.bits.entries != 0x0f) && /* older (Neptune) boards */ | |
1403 | (reg_01.bits.entries != 0x17) && /* typical ISA+PCI boards */ | |
1404 | (reg_01.bits.entries != 0x1b) && /* Compaq Proliant boards */ | |
1405 | (reg_01.bits.entries != 0x1f) && /* dual Xeon boards */ | |
1406 | (reg_01.bits.entries != 0x22) && /* bigger Xeon boards */ | |
1407 | (reg_01.bits.entries != 0x2E) && | |
1408 | (reg_01.bits.entries != 0x3F) | |
1409 | ) | |
1410 | UNEXPECTED_IO_APIC(); | |
1411 | ||
1412 | printk(KERN_DEBUG "....... : PRQ implemented: %X\n", reg_01.bits.PRQ); | |
1413 | printk(KERN_DEBUG "....... : IO APIC version: %04X\n", reg_01.bits.version); | |
1414 | if ( (reg_01.bits.version != 0x01) && /* 82489DX IO-APICs */ | |
1415 | (reg_01.bits.version != 0x10) && /* oldest IO-APICs */ | |
1416 | (reg_01.bits.version != 0x11) && /* Pentium/Pro IO-APICs */ | |
1417 | (reg_01.bits.version != 0x13) && /* Xeon IO-APICs */ | |
1418 | (reg_01.bits.version != 0x20) /* Intel P64H (82806 AA) */ | |
1419 | ) | |
1420 | UNEXPECTED_IO_APIC(); | |
1421 | if (reg_01.bits.__reserved_1 || reg_01.bits.__reserved_2) | |
1422 | UNEXPECTED_IO_APIC(); | |
1423 | ||
1424 | /* | |
1425 | * Some Intel chipsets with IO APIC VERSION of 0x1? don't have reg_02, | |
1426 | * but the value of reg_02 is read as the previous read register | |
1427 | * value, so ignore it if reg_02 == reg_01. | |
1428 | */ | |
1429 | if (reg_01.bits.version >= 0x10 && reg_02.raw != reg_01.raw) { | |
1430 | printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw); | |
1431 | printk(KERN_DEBUG "....... : arbitration: %02X\n", reg_02.bits.arbitration); | |
1432 | if (reg_02.bits.__reserved_1 || reg_02.bits.__reserved_2) | |
1433 | UNEXPECTED_IO_APIC(); | |
1434 | } | |
1435 | ||
1436 | /* | |
1437 | * Some Intel chipsets with IO APIC VERSION of 0x2? don't have reg_02 | |
1438 | * or reg_03, but the value of reg_0[23] is read as the previous read | |
1439 | * register value, so ignore it if reg_03 == reg_0[12]. | |
1440 | */ | |
1441 | if (reg_01.bits.version >= 0x20 && reg_03.raw != reg_02.raw && | |
1442 | reg_03.raw != reg_01.raw) { | |
1443 | printk(KERN_DEBUG ".... register #03: %08X\n", reg_03.raw); | |
1444 | printk(KERN_DEBUG "....... : Boot DT : %X\n", reg_03.bits.boot_DT); | |
1445 | if (reg_03.bits.__reserved_1) | |
1446 | UNEXPECTED_IO_APIC(); | |
1447 | } | |
1448 | ||
1449 | printk(KERN_DEBUG ".... IRQ redirection table:\n"); | |
1450 | ||
1451 | printk(KERN_DEBUG " NR Log Phy Mask Trig IRR Pol" | |
1452 | " Stat Dest Deli Vect: \n"); | |
1453 | ||
1454 | for (i = 0; i <= reg_01.bits.entries; i++) { | |
1455 | struct IO_APIC_route_entry entry; | |
1456 | ||
cf4c6a2f | 1457 | entry = ioapic_read_entry(apic, i); |
1da177e4 LT |
1458 | |
1459 | printk(KERN_DEBUG " %02x %03X %02X ", | |
1460 | i, | |
1461 | entry.dest.logical.logical_dest, | |
1462 | entry.dest.physical.physical_dest | |
1463 | ); | |
1464 | ||
1465 | printk("%1d %1d %1d %1d %1d %1d %1d %02X\n", | |
1466 | entry.mask, | |
1467 | entry.trigger, | |
1468 | entry.irr, | |
1469 | entry.polarity, | |
1470 | entry.delivery_status, | |
1471 | entry.dest_mode, | |
1472 | entry.delivery_mode, | |
1473 | entry.vector | |
1474 | ); | |
1475 | } | |
1476 | } | |
1da177e4 LT |
1477 | printk(KERN_DEBUG "IRQ to pin mappings:\n"); |
1478 | for (i = 0; i < NR_IRQS; i++) { | |
1479 | struct irq_pin_list *entry = irq_2_pin + i; | |
1480 | if (entry->pin < 0) | |
1481 | continue; | |
ace80ab7 | 1482 | printk(KERN_DEBUG "IRQ%d ", i); |
1da177e4 LT |
1483 | for (;;) { |
1484 | printk("-> %d:%d", entry->apic, entry->pin); | |
1485 | if (!entry->next) | |
1486 | break; | |
1487 | entry = irq_2_pin + entry->next; | |
1488 | } | |
1489 | printk("\n"); | |
1490 | } | |
1491 | ||
1492 | printk(KERN_INFO ".................................... done.\n"); | |
1493 | ||
1494 | return; | |
1495 | } | |
1496 | ||
1497 | #if 0 | |
1498 | ||
1499 | static void print_APIC_bitfield (int base) | |
1500 | { | |
1501 | unsigned int v; | |
1502 | int i, j; | |
1503 | ||
1504 | if (apic_verbosity == APIC_QUIET) | |
1505 | return; | |
1506 | ||
1507 | printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG); | |
1508 | for (i = 0; i < 8; i++) { | |
1509 | v = apic_read(base + i*0x10); | |
1510 | for (j = 0; j < 32; j++) { | |
1511 | if (v & (1<<j)) | |
1512 | printk("1"); | |
1513 | else | |
1514 | printk("0"); | |
1515 | } | |
1516 | printk("\n"); | |
1517 | } | |
1518 | } | |
1519 | ||
1520 | void /*__init*/ print_local_APIC(void * dummy) | |
1521 | { | |
1522 | unsigned int v, ver, maxlvt; | |
1523 | ||
1524 | if (apic_verbosity == APIC_QUIET) | |
1525 | return; | |
1526 | ||
1527 | printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n", | |
1528 | smp_processor_id(), hard_smp_processor_id()); | |
1529 | v = apic_read(APIC_ID); | |
1530 | printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, GET_APIC_ID(v)); | |
1531 | v = apic_read(APIC_LVR); | |
1532 | printk(KERN_INFO "... APIC VERSION: %08x\n", v); | |
1533 | ver = GET_APIC_VERSION(v); | |
1534 | maxlvt = get_maxlvt(); | |
1535 | ||
1536 | v = apic_read(APIC_TASKPRI); | |
1537 | printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK); | |
1538 | ||
1539 | if (APIC_INTEGRATED(ver)) { /* !82489DX */ | |
1540 | v = apic_read(APIC_ARBPRI); | |
1541 | printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v, | |
1542 | v & APIC_ARBPRI_MASK); | |
1543 | v = apic_read(APIC_PROCPRI); | |
1544 | printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v); | |
1545 | } | |
1546 | ||
1547 | v = apic_read(APIC_EOI); | |
1548 | printk(KERN_DEBUG "... APIC EOI: %08x\n", v); | |
1549 | v = apic_read(APIC_RRR); | |
1550 | printk(KERN_DEBUG "... APIC RRR: %08x\n", v); | |
1551 | v = apic_read(APIC_LDR); | |
1552 | printk(KERN_DEBUG "... APIC LDR: %08x\n", v); | |
1553 | v = apic_read(APIC_DFR); | |
1554 | printk(KERN_DEBUG "... APIC DFR: %08x\n", v); | |
1555 | v = apic_read(APIC_SPIV); | |
1556 | printk(KERN_DEBUG "... APIC SPIV: %08x\n", v); | |
1557 | ||
1558 | printk(KERN_DEBUG "... APIC ISR field:\n"); | |
1559 | print_APIC_bitfield(APIC_ISR); | |
1560 | printk(KERN_DEBUG "... APIC TMR field:\n"); | |
1561 | print_APIC_bitfield(APIC_TMR); | |
1562 | printk(KERN_DEBUG "... APIC IRR field:\n"); | |
1563 | print_APIC_bitfield(APIC_IRR); | |
1564 | ||
1565 | if (APIC_INTEGRATED(ver)) { /* !82489DX */ | |
1566 | if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */ | |
1567 | apic_write(APIC_ESR, 0); | |
1568 | v = apic_read(APIC_ESR); | |
1569 | printk(KERN_DEBUG "... APIC ESR: %08x\n", v); | |
1570 | } | |
1571 | ||
1572 | v = apic_read(APIC_ICR); | |
1573 | printk(KERN_DEBUG "... APIC ICR: %08x\n", v); | |
1574 | v = apic_read(APIC_ICR2); | |
1575 | printk(KERN_DEBUG "... APIC ICR2: %08x\n", v); | |
1576 | ||
1577 | v = apic_read(APIC_LVTT); | |
1578 | printk(KERN_DEBUG "... APIC LVTT: %08x\n", v); | |
1579 | ||
1580 | if (maxlvt > 3) { /* PC is LVT#4. */ | |
1581 | v = apic_read(APIC_LVTPC); | |
1582 | printk(KERN_DEBUG "... APIC LVTPC: %08x\n", v); | |
1583 | } | |
1584 | v = apic_read(APIC_LVT0); | |
1585 | printk(KERN_DEBUG "... APIC LVT0: %08x\n", v); | |
1586 | v = apic_read(APIC_LVT1); | |
1587 | printk(KERN_DEBUG "... APIC LVT1: %08x\n", v); | |
1588 | ||
1589 | if (maxlvt > 2) { /* ERR is LVT#3. */ | |
1590 | v = apic_read(APIC_LVTERR); | |
1591 | printk(KERN_DEBUG "... APIC LVTERR: %08x\n", v); | |
1592 | } | |
1593 | ||
1594 | v = apic_read(APIC_TMICT); | |
1595 | printk(KERN_DEBUG "... APIC TMICT: %08x\n", v); | |
1596 | v = apic_read(APIC_TMCCT); | |
1597 | printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v); | |
1598 | v = apic_read(APIC_TDCR); | |
1599 | printk(KERN_DEBUG "... APIC TDCR: %08x\n", v); | |
1600 | printk("\n"); | |
1601 | } | |
1602 | ||
1603 | void print_all_local_APICs (void) | |
1604 | { | |
1605 | on_each_cpu(print_local_APIC, NULL, 1, 1); | |
1606 | } | |
1607 | ||
1608 | void /*__init*/ print_PIC(void) | |
1609 | { | |
1da177e4 LT |
1610 | unsigned int v; |
1611 | unsigned long flags; | |
1612 | ||
1613 | if (apic_verbosity == APIC_QUIET) | |
1614 | return; | |
1615 | ||
1616 | printk(KERN_DEBUG "\nprinting PIC contents\n"); | |
1617 | ||
1618 | spin_lock_irqsave(&i8259A_lock, flags); | |
1619 | ||
1620 | v = inb(0xa1) << 8 | inb(0x21); | |
1621 | printk(KERN_DEBUG "... PIC IMR: %04x\n", v); | |
1622 | ||
1623 | v = inb(0xa0) << 8 | inb(0x20); | |
1624 | printk(KERN_DEBUG "... PIC IRR: %04x\n", v); | |
1625 | ||
1626 | outb(0x0b,0xa0); | |
1627 | outb(0x0b,0x20); | |
1628 | v = inb(0xa0) << 8 | inb(0x20); | |
1629 | outb(0x0a,0xa0); | |
1630 | outb(0x0a,0x20); | |
1631 | ||
1632 | spin_unlock_irqrestore(&i8259A_lock, flags); | |
1633 | ||
1634 | printk(KERN_DEBUG "... PIC ISR: %04x\n", v); | |
1635 | ||
1636 | v = inb(0x4d1) << 8 | inb(0x4d0); | |
1637 | printk(KERN_DEBUG "... PIC ELCR: %04x\n", v); | |
1638 | } | |
1639 | ||
1640 | #endif /* 0 */ | |
1641 | ||
1642 | static void __init enable_IO_APIC(void) | |
1643 | { | |
1644 | union IO_APIC_reg_01 reg_01; | |
fcfd636a EB |
1645 | int i8259_apic, i8259_pin; |
1646 | int i, apic; | |
1da177e4 LT |
1647 | unsigned long flags; |
1648 | ||
1649 | for (i = 0; i < PIN_MAP_SIZE; i++) { | |
1650 | irq_2_pin[i].pin = -1; | |
1651 | irq_2_pin[i].next = 0; | |
1652 | } | |
1653 | if (!pirqs_enabled) | |
1654 | for (i = 0; i < MAX_PIRQS; i++) | |
1655 | pirq_entries[i] = -1; | |
1656 | ||
1657 | /* | |
1658 | * The number of IO-APIC IRQ registers (== #pins): | |
1659 | */ | |
fcfd636a | 1660 | for (apic = 0; apic < nr_ioapics; apic++) { |
1da177e4 | 1661 | spin_lock_irqsave(&ioapic_lock, flags); |
fcfd636a | 1662 | reg_01.raw = io_apic_read(apic, 1); |
1da177e4 | 1663 | spin_unlock_irqrestore(&ioapic_lock, flags); |
fcfd636a EB |
1664 | nr_ioapic_registers[apic] = reg_01.bits.entries+1; |
1665 | } | |
1666 | for(apic = 0; apic < nr_ioapics; apic++) { | |
1667 | int pin; | |
1668 | /* See if any of the pins is in ExtINT mode */ | |
1008fddc | 1669 | for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { |
fcfd636a | 1670 | struct IO_APIC_route_entry entry; |
cf4c6a2f | 1671 | entry = ioapic_read_entry(apic, pin); |
fcfd636a EB |
1672 | |
1673 | ||
1674 | /* If the interrupt line is enabled and in ExtInt mode | |
1675 | * I have found the pin where the i8259 is connected. | |
1676 | */ | |
1677 | if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) { | |
1678 | ioapic_i8259.apic = apic; | |
1679 | ioapic_i8259.pin = pin; | |
1680 | goto found_i8259; | |
1681 | } | |
1682 | } | |
1683 | } | |
1684 | found_i8259: | |
1685 | /* Look to see what if the MP table has reported the ExtINT */ | |
1686 | /* If we could not find the appropriate pin by looking at the ioapic | |
1687 | * the i8259 probably is not connected the ioapic but give the | |
1688 | * mptable a chance anyway. | |
1689 | */ | |
1690 | i8259_pin = find_isa_irq_pin(0, mp_ExtINT); | |
1691 | i8259_apic = find_isa_irq_apic(0, mp_ExtINT); | |
1692 | /* Trust the MP table if nothing is setup in the hardware */ | |
1693 | if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) { | |
1694 | printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n"); | |
1695 | ioapic_i8259.pin = i8259_pin; | |
1696 | ioapic_i8259.apic = i8259_apic; | |
1697 | } | |
1698 | /* Complain if the MP table and the hardware disagree */ | |
1699 | if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) && | |
1700 | (i8259_pin >= 0) && (ioapic_i8259.pin >= 0)) | |
1701 | { | |
1702 | printk(KERN_WARNING "ExtINT in hardware and MP table differ\n"); | |
1da177e4 LT |
1703 | } |
1704 | ||
1705 | /* | |
1706 | * Do not trust the IO-APIC being empty at bootup | |
1707 | */ | |
1708 | clear_IO_APIC(); | |
1709 | } | |
1710 | ||
1711 | /* | |
1712 | * Not an __init, needed by the reboot code | |
1713 | */ | |
1714 | void disable_IO_APIC(void) | |
1715 | { | |
1716 | /* | |
1717 | * Clear the IO-APIC before rebooting: | |
1718 | */ | |
1719 | clear_IO_APIC(); | |
1720 | ||
650927ef | 1721 | /* |
0b968d23 | 1722 | * If the i8259 is routed through an IOAPIC |
650927ef | 1723 | * Put that IOAPIC in virtual wire mode |
0b968d23 | 1724 | * so legacy interrupts can be delivered. |
650927ef | 1725 | */ |
fcfd636a | 1726 | if (ioapic_i8259.pin != -1) { |
650927ef | 1727 | struct IO_APIC_route_entry entry; |
650927ef EB |
1728 | |
1729 | memset(&entry, 0, sizeof(entry)); | |
1730 | entry.mask = 0; /* Enabled */ | |
1731 | entry.trigger = 0; /* Edge */ | |
1732 | entry.irr = 0; | |
1733 | entry.polarity = 0; /* High */ | |
1734 | entry.delivery_status = 0; | |
1735 | entry.dest_mode = 0; /* Physical */ | |
fcfd636a | 1736 | entry.delivery_mode = dest_ExtINT; /* ExtInt */ |
650927ef | 1737 | entry.vector = 0; |
76865c3f VG |
1738 | entry.dest.physical.physical_dest = |
1739 | GET_APIC_ID(apic_read(APIC_ID)); | |
650927ef EB |
1740 | |
1741 | /* | |
1742 | * Add it to the IO-APIC irq-routing table: | |
1743 | */ | |
cf4c6a2f | 1744 | ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry); |
650927ef | 1745 | } |
fcfd636a | 1746 | disconnect_bsp_APIC(ioapic_i8259.pin != -1); |
1da177e4 LT |
1747 | } |
1748 | ||
1749 | /* | |
1750 | * function to set the IO-APIC physical IDs based on the | |
1751 | * values stored in the MPC table. | |
1752 | * | |
1753 | * by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999 | |
1754 | */ | |
1755 | ||
1756 | #ifndef CONFIG_X86_NUMAQ | |
1757 | static void __init setup_ioapic_ids_from_mpc(void) | |
1758 | { | |
1759 | union IO_APIC_reg_00 reg_00; | |
1760 | physid_mask_t phys_id_present_map; | |
1761 | int apic; | |
1762 | int i; | |
1763 | unsigned char old_id; | |
1764 | unsigned long flags; | |
1765 | ||
ca05fea6 NP |
1766 | /* |
1767 | * Don't check I/O APIC IDs for xAPIC systems. They have | |
1768 | * no meaning without the serial APIC bus. | |
1769 | */ | |
7c5c1e42 SL |
1770 | if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) |
1771 | || APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) | |
ca05fea6 | 1772 | return; |
1da177e4 LT |
1773 | /* |
1774 | * This is broken; anything with a real cpu count has to | |
1775 | * circumvent this idiocy regardless. | |
1776 | */ | |
1777 | phys_id_present_map = ioapic_phys_id_map(phys_cpu_present_map); | |
1778 | ||
1779 | /* | |
1780 | * Set the IOAPIC ID to the value stored in the MPC table. | |
1781 | */ | |
1782 | for (apic = 0; apic < nr_ioapics; apic++) { | |
1783 | ||
1784 | /* Read the register 0 value */ | |
1785 | spin_lock_irqsave(&ioapic_lock, flags); | |
1786 | reg_00.raw = io_apic_read(apic, 0); | |
1787 | spin_unlock_irqrestore(&ioapic_lock, flags); | |
1788 | ||
1789 | old_id = mp_ioapics[apic].mpc_apicid; | |
1790 | ||
1791 | if (mp_ioapics[apic].mpc_apicid >= get_physical_broadcast()) { | |
1792 | printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n", | |
1793 | apic, mp_ioapics[apic].mpc_apicid); | |
1794 | printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", | |
1795 | reg_00.bits.ID); | |
1796 | mp_ioapics[apic].mpc_apicid = reg_00.bits.ID; | |
1797 | } | |
1798 | ||
1da177e4 LT |
1799 | /* |
1800 | * Sanity check, is the ID really free? Every APIC in a | |
1801 | * system must have a unique ID or we get lots of nice | |
1802 | * 'stuck on smp_invalidate_needed IPI wait' messages. | |
1803 | */ | |
1804 | if (check_apicid_used(phys_id_present_map, | |
1805 | mp_ioapics[apic].mpc_apicid)) { | |
1806 | printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n", | |
1807 | apic, mp_ioapics[apic].mpc_apicid); | |
1808 | for (i = 0; i < get_physical_broadcast(); i++) | |
1809 | if (!physid_isset(i, phys_id_present_map)) | |
1810 | break; | |
1811 | if (i >= get_physical_broadcast()) | |
1812 | panic("Max APIC ID exceeded!\n"); | |
1813 | printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", | |
1814 | i); | |
1815 | physid_set(i, phys_id_present_map); | |
1816 | mp_ioapics[apic].mpc_apicid = i; | |
1817 | } else { | |
1818 | physid_mask_t tmp; | |
1819 | tmp = apicid_to_cpu_present(mp_ioapics[apic].mpc_apicid); | |
1820 | apic_printk(APIC_VERBOSE, "Setting %d in the " | |
1821 | "phys_id_present_map\n", | |
1822 | mp_ioapics[apic].mpc_apicid); | |
1823 | physids_or(phys_id_present_map, phys_id_present_map, tmp); | |
1824 | } | |
1825 | ||
1826 | ||
1827 | /* | |
1828 | * We need to adjust the IRQ routing table | |
1829 | * if the ID changed. | |
1830 | */ | |
1831 | if (old_id != mp_ioapics[apic].mpc_apicid) | |
1832 | for (i = 0; i < mp_irq_entries; i++) | |
1833 | if (mp_irqs[i].mpc_dstapic == old_id) | |
1834 | mp_irqs[i].mpc_dstapic | |
1835 | = mp_ioapics[apic].mpc_apicid; | |
1836 | ||
1837 | /* | |
1838 | * Read the right value from the MPC table and | |
1839 | * write it into the ID register. | |
1840 | */ | |
1841 | apic_printk(APIC_VERBOSE, KERN_INFO | |
1842 | "...changing IO-APIC physical APIC ID to %d ...", | |
1843 | mp_ioapics[apic].mpc_apicid); | |
1844 | ||
1845 | reg_00.bits.ID = mp_ioapics[apic].mpc_apicid; | |
1846 | spin_lock_irqsave(&ioapic_lock, flags); | |
1847 | io_apic_write(apic, 0, reg_00.raw); | |
1848 | spin_unlock_irqrestore(&ioapic_lock, flags); | |
1849 | ||
1850 | /* | |
1851 | * Sanity check | |
1852 | */ | |
1853 | spin_lock_irqsave(&ioapic_lock, flags); | |
1854 | reg_00.raw = io_apic_read(apic, 0); | |
1855 | spin_unlock_irqrestore(&ioapic_lock, flags); | |
1856 | if (reg_00.bits.ID != mp_ioapics[apic].mpc_apicid) | |
1857 | printk("could not set ID!\n"); | |
1858 | else | |
1859 | apic_printk(APIC_VERBOSE, " ok.\n"); | |
1860 | } | |
1861 | } | |
1862 | #else | |
1863 | static void __init setup_ioapic_ids_from_mpc(void) { } | |
1864 | #endif | |
1865 | ||
1866 | /* | |
1867 | * There is a nasty bug in some older SMP boards, their mptable lies | |
1868 | * about the timer IRQ. We do the following to work around the situation: | |
1869 | * | |
1870 | * - timer IRQ defaults to IO-APIC IRQ | |
1871 | * - if this function detects that timer IRQs are defunct, then we fall | |
1872 | * back to ISA timer IRQs | |
1873 | */ | |
1874 | static int __init timer_irq_works(void) | |
1875 | { | |
1876 | unsigned long t1 = jiffies; | |
1877 | ||
1878 | local_irq_enable(); | |
1879 | /* Let ten ticks pass... */ | |
1880 | mdelay((10 * 1000) / HZ); | |
1881 | ||
1882 | /* | |
1883 | * Expect a few ticks at least, to be sure some possible | |
1884 | * glue logic does not lock up after one or two first | |
1885 | * ticks in a non-ExtINT mode. Also the local APIC | |
1886 | * might have cached one ExtINT interrupt. Finally, at | |
1887 | * least one tick may be lost due to delays. | |
1888 | */ | |
1889 | if (jiffies - t1 > 4) | |
1890 | return 1; | |
1891 | ||
1892 | return 0; | |
1893 | } | |
1894 | ||
1895 | /* | |
1896 | * In the SMP+IOAPIC case it might happen that there are an unspecified | |
1897 | * number of pending IRQ events unhandled. These cases are very rare, | |
1898 | * so we 'resend' these IRQs via IPIs, to the same CPU. It's much | |
1899 | * better to do it this way as thus we do not have to be aware of | |
1900 | * 'pending' interrupts in the IRQ path, except at this point. | |
1901 | */ | |
1902 | /* | |
1903 | * Edge triggered needs to resend any interrupt | |
1904 | * that was delayed but this is now handled in the device | |
1905 | * independent code. | |
1906 | */ | |
1907 | ||
1908 | /* | |
f5b9ed7a IM |
1909 | * Startup quirk: |
1910 | * | |
1da177e4 LT |
1911 | * Starting up a edge-triggered IO-APIC interrupt is |
1912 | * nasty - we need to make sure that we get the edge. | |
1913 | * If it is already asserted for some reason, we need | |
1914 | * return 1 to indicate that is was pending. | |
1915 | * | |
1916 | * This is not complete - we should be able to fake | |
1917 | * an edge even if it isn't on the 8259A... | |
f5b9ed7a IM |
1918 | * |
1919 | * (We do this for level-triggered IRQs too - it cannot hurt.) | |
1da177e4 | 1920 | */ |
f5b9ed7a | 1921 | static unsigned int startup_ioapic_irq(unsigned int irq) |
1da177e4 LT |
1922 | { |
1923 | int was_pending = 0; | |
1924 | unsigned long flags; | |
1925 | ||
1926 | spin_lock_irqsave(&ioapic_lock, flags); | |
1927 | if (irq < 16) { | |
1928 | disable_8259A_irq(irq); | |
1929 | if (i8259A_irq_pending(irq)) | |
1930 | was_pending = 1; | |
1931 | } | |
1932 | __unmask_IO_APIC_irq(irq); | |
1933 | spin_unlock_irqrestore(&ioapic_lock, flags); | |
1934 | ||
1935 | return was_pending; | |
1936 | } | |
1937 | ||
f5b9ed7a | 1938 | static void ack_ioapic_irq(unsigned int irq) |
1da177e4 | 1939 | { |
ace80ab7 | 1940 | move_native_irq(irq); |
1da177e4 LT |
1941 | ack_APIC_irq(); |
1942 | } | |
1943 | ||
f5b9ed7a | 1944 | static void ack_ioapic_quirk_irq(unsigned int irq) |
1da177e4 LT |
1945 | { |
1946 | unsigned long v; | |
1947 | int i; | |
1948 | ||
ace80ab7 | 1949 | move_native_irq(irq); |
1da177e4 LT |
1950 | /* |
1951 | * It appears there is an erratum which affects at least version 0x11 | |
1952 | * of I/O APIC (that's the 82093AA and cores integrated into various | |
1953 | * chipsets). Under certain conditions a level-triggered interrupt is | |
1954 | * erroneously delivered as edge-triggered one but the respective IRR | |
1955 | * bit gets set nevertheless. As a result the I/O unit expects an EOI | |
1956 | * message but it will never arrive and further interrupts are blocked | |
1957 | * from the source. The exact reason is so far unknown, but the | |
1958 | * phenomenon was observed when two consecutive interrupt requests | |
1959 | * from a given source get delivered to the same CPU and the source is | |
1960 | * temporarily disabled in between. | |
1961 | * | |
1962 | * A workaround is to simulate an EOI message manually. We achieve it | |
1963 | * by setting the trigger mode to edge and then to level when the edge | |
1964 | * trigger mode gets detected in the TMR of a local APIC for a | |
1965 | * level-triggered interrupt. We mask the source for the time of the | |
1966 | * operation to prevent an edge-triggered interrupt escaping meanwhile. | |
1967 | * The idea is from Manfred Spraul. --macro | |
1968 | */ | |
1969 | i = IO_APIC_VECTOR(irq); | |
1970 | ||
1971 | v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1)); | |
1972 | ||
1973 | ack_APIC_irq(); | |
1974 | ||
1975 | if (!(v & (1 << (i & 0x1f)))) { | |
1976 | atomic_inc(&irq_mis_count); | |
1977 | spin_lock(&ioapic_lock); | |
1978 | __mask_and_edge_IO_APIC_irq(irq); | |
1979 | __unmask_and_level_IO_APIC_irq(irq); | |
1980 | spin_unlock(&ioapic_lock); | |
1981 | } | |
1982 | } | |
1983 | ||
ace80ab7 | 1984 | static int ioapic_retrigger_irq(unsigned int irq) |
1da177e4 | 1985 | { |
c0ad90a3 IM |
1986 | send_IPI_self(IO_APIC_VECTOR(irq)); |
1987 | ||
1988 | return 1; | |
1989 | } | |
1990 | ||
f5b9ed7a IM |
1991 | static struct irq_chip ioapic_chip __read_mostly = { |
1992 | .name = "IO-APIC", | |
ace80ab7 EB |
1993 | .startup = startup_ioapic_irq, |
1994 | .mask = mask_IO_APIC_irq, | |
1995 | .unmask = unmask_IO_APIC_irq, | |
1996 | .ack = ack_ioapic_irq, | |
1997 | .eoi = ack_ioapic_quirk_irq, | |
54d5d424 | 1998 | #ifdef CONFIG_SMP |
ace80ab7 | 1999 | .set_affinity = set_ioapic_affinity_irq, |
54d5d424 | 2000 | #endif |
ace80ab7 | 2001 | .retrigger = ioapic_retrigger_irq, |
1da177e4 LT |
2002 | }; |
2003 | ||
1da177e4 LT |
2004 | |
2005 | static inline void init_IO_APIC_traps(void) | |
2006 | { | |
2007 | int irq; | |
2008 | ||
2009 | /* | |
2010 | * NOTE! The local APIC isn't very good at handling | |
2011 | * multiple interrupts at the same interrupt level. | |
2012 | * As the interrupt level is determined by taking the | |
2013 | * vector number and shifting that right by 4, we | |
2014 | * want to spread these out a bit so that they don't | |
2015 | * all fall in the same interrupt level. | |
2016 | * | |
2017 | * Also, we've got to be careful not to trash gate | |
2018 | * 0x80, because int 0x80 is hm, kind of importantish. ;) | |
2019 | */ | |
2020 | for (irq = 0; irq < NR_IRQS ; irq++) { | |
2021 | int tmp = irq; | |
1da177e4 LT |
2022 | if (IO_APIC_IRQ(tmp) && !IO_APIC_VECTOR(tmp)) { |
2023 | /* | |
2024 | * Hmm.. We don't have an entry for this, | |
2025 | * so default to an old-fashioned 8259 | |
2026 | * interrupt if we can.. | |
2027 | */ | |
2028 | if (irq < 16) | |
2029 | make_8259A_irq(irq); | |
2030 | else | |
2031 | /* Strange. Oh, well.. */ | |
f5b9ed7a | 2032 | irq_desc[irq].chip = &no_irq_chip; |
1da177e4 LT |
2033 | } |
2034 | } | |
2035 | } | |
2036 | ||
f5b9ed7a IM |
2037 | /* |
2038 | * The local APIC irq-chip implementation: | |
2039 | */ | |
1da177e4 | 2040 | |
f5b9ed7a IM |
2041 | static void ack_apic(unsigned int irq) |
2042 | { | |
2043 | ack_APIC_irq(); | |
1da177e4 LT |
2044 | } |
2045 | ||
f5b9ed7a | 2046 | static void mask_lapic_irq (unsigned int irq) |
1da177e4 LT |
2047 | { |
2048 | unsigned long v; | |
2049 | ||
2050 | v = apic_read(APIC_LVT0); | |
2051 | apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED); | |
2052 | } | |
2053 | ||
f5b9ed7a | 2054 | static void unmask_lapic_irq (unsigned int irq) |
1da177e4 | 2055 | { |
f5b9ed7a | 2056 | unsigned long v; |
1da177e4 | 2057 | |
f5b9ed7a IM |
2058 | v = apic_read(APIC_LVT0); |
2059 | apic_write_around(APIC_LVT0, v & ~APIC_LVT_MASKED); | |
2060 | } | |
1da177e4 | 2061 | |
f5b9ed7a IM |
2062 | static struct irq_chip lapic_chip __read_mostly = { |
2063 | .name = "local-APIC-edge", | |
2064 | .mask = mask_lapic_irq, | |
2065 | .unmask = unmask_lapic_irq, | |
2066 | .eoi = ack_apic, | |
1da177e4 LT |
2067 | }; |
2068 | ||
2069 | static void setup_nmi (void) | |
2070 | { | |
2071 | /* | |
2072 | * Dirty trick to enable the NMI watchdog ... | |
2073 | * We put the 8259A master into AEOI mode and | |
2074 | * unmask on all local APICs LVT0 as NMI. | |
2075 | * | |
2076 | * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire') | |
2077 | * is from Maciej W. Rozycki - so we do not have to EOI from | |
2078 | * the NMI handler or the timer interrupt. | |
2079 | */ | |
2080 | apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ..."); | |
2081 | ||
2082 | on_each_cpu(enable_NMI_through_LVT0, NULL, 1, 1); | |
2083 | ||
2084 | apic_printk(APIC_VERBOSE, " done.\n"); | |
2085 | } | |
2086 | ||
2087 | /* | |
2088 | * This looks a bit hackish but it's about the only one way of sending | |
2089 | * a few INTA cycles to 8259As and any associated glue logic. ICR does | |
2090 | * not support the ExtINT mode, unfortunately. We need to send these | |
2091 | * cycles as some i82489DX-based boards have glue logic that keeps the | |
2092 | * 8259A interrupt line asserted until INTA. --macro | |
2093 | */ | |
2094 | static inline void unlock_ExtINT_logic(void) | |
2095 | { | |
fcfd636a | 2096 | int apic, pin, i; |
1da177e4 LT |
2097 | struct IO_APIC_route_entry entry0, entry1; |
2098 | unsigned char save_control, save_freq_select; | |
1da177e4 | 2099 | |
fcfd636a EB |
2100 | pin = find_isa_irq_pin(8, mp_INT); |
2101 | apic = find_isa_irq_apic(8, mp_INT); | |
1da177e4 LT |
2102 | if (pin == -1) |
2103 | return; | |
2104 | ||
cf4c6a2f | 2105 | entry0 = ioapic_read_entry(apic, pin); |
fcfd636a | 2106 | clear_IO_APIC_pin(apic, pin); |
1da177e4 LT |
2107 | |
2108 | memset(&entry1, 0, sizeof(entry1)); | |
2109 | ||
2110 | entry1.dest_mode = 0; /* physical delivery */ | |
2111 | entry1.mask = 0; /* unmask IRQ now */ | |
2112 | entry1.dest.physical.physical_dest = hard_smp_processor_id(); | |
2113 | entry1.delivery_mode = dest_ExtINT; | |
2114 | entry1.polarity = entry0.polarity; | |
2115 | entry1.trigger = 0; | |
2116 | entry1.vector = 0; | |
2117 | ||
cf4c6a2f | 2118 | ioapic_write_entry(apic, pin, entry1); |
1da177e4 LT |
2119 | |
2120 | save_control = CMOS_READ(RTC_CONTROL); | |
2121 | save_freq_select = CMOS_READ(RTC_FREQ_SELECT); | |
2122 | CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6, | |
2123 | RTC_FREQ_SELECT); | |
2124 | CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL); | |
2125 | ||
2126 | i = 100; | |
2127 | while (i-- > 0) { | |
2128 | mdelay(10); | |
2129 | if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF) | |
2130 | i -= 10; | |
2131 | } | |
2132 | ||
2133 | CMOS_WRITE(save_control, RTC_CONTROL); | |
2134 | CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); | |
fcfd636a | 2135 | clear_IO_APIC_pin(apic, pin); |
1da177e4 | 2136 | |
cf4c6a2f | 2137 | ioapic_write_entry(apic, pin, entry0); |
1da177e4 LT |
2138 | } |
2139 | ||
e0c1e9bf KM |
2140 | int timer_uses_ioapic_pin_0; |
2141 | ||
1da177e4 LT |
2142 | /* |
2143 | * This code may look a bit paranoid, but it's supposed to cooperate with | |
2144 | * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ | |
2145 | * is so screwy. Thanks to Brian Perkins for testing/hacking this beast | |
2146 | * fanatically on his truly buggy board. | |
2147 | */ | |
2148 | static inline void check_timer(void) | |
2149 | { | |
fcfd636a | 2150 | int apic1, pin1, apic2, pin2; |
1da177e4 LT |
2151 | int vector; |
2152 | ||
2153 | /* | |
2154 | * get/set the timer IRQ vector: | |
2155 | */ | |
2156 | disable_8259A_irq(0); | |
2157 | vector = assign_irq_vector(0); | |
2158 | set_intr_gate(vector, interrupt[0]); | |
2159 | ||
2160 | /* | |
2161 | * Subtle, code in do_timer_interrupt() expects an AEOI | |
2162 | * mode for the 8259A whenever interrupts are routed | |
2163 | * through I/O APICs. Also IRQ0 has to be enabled in | |
2164 | * the 8259A which implies the virtual wire has to be | |
2165 | * disabled in the local APIC. | |
2166 | */ | |
2167 | apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); | |
2168 | init_8259A(1); | |
2169 | timer_ack = 1; | |
f9262c12 AK |
2170 | if (timer_over_8254 > 0) |
2171 | enable_8259A_irq(0); | |
1da177e4 | 2172 | |
fcfd636a EB |
2173 | pin1 = find_isa_irq_pin(0, mp_INT); |
2174 | apic1 = find_isa_irq_apic(0, mp_INT); | |
2175 | pin2 = ioapic_i8259.pin; | |
2176 | apic2 = ioapic_i8259.apic; | |
1da177e4 | 2177 | |
e0c1e9bf KM |
2178 | if (pin1 == 0) |
2179 | timer_uses_ioapic_pin_0 = 1; | |
2180 | ||
fcfd636a EB |
2181 | printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n", |
2182 | vector, apic1, pin1, apic2, pin2); | |
1da177e4 LT |
2183 | |
2184 | if (pin1 != -1) { | |
2185 | /* | |
2186 | * Ok, does IRQ0 through the IOAPIC work? | |
2187 | */ | |
2188 | unmask_IO_APIC_irq(0); | |
2189 | if (timer_irq_works()) { | |
2190 | if (nmi_watchdog == NMI_IO_APIC) { | |
2191 | disable_8259A_irq(0); | |
2192 | setup_nmi(); | |
2193 | enable_8259A_irq(0); | |
1da177e4 | 2194 | } |
66759a01 CE |
2195 | if (disable_timer_pin_1 > 0) |
2196 | clear_IO_APIC_pin(0, pin1); | |
1da177e4 LT |
2197 | return; |
2198 | } | |
fcfd636a EB |
2199 | clear_IO_APIC_pin(apic1, pin1); |
2200 | printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to " | |
2201 | "IO-APIC\n"); | |
1da177e4 LT |
2202 | } |
2203 | ||
2204 | printk(KERN_INFO "...trying to set up timer (IRQ0) through the 8259A ... "); | |
2205 | if (pin2 != -1) { | |
2206 | printk("\n..... (found pin %d) ...", pin2); | |
2207 | /* | |
2208 | * legacy devices should be connected to IO APIC #0 | |
2209 | */ | |
fcfd636a | 2210 | setup_ExtINT_IRQ0_pin(apic2, pin2, vector); |
1da177e4 LT |
2211 | if (timer_irq_works()) { |
2212 | printk("works.\n"); | |
2213 | if (pin1 != -1) | |
fcfd636a | 2214 | replace_pin_at_irq(0, apic1, pin1, apic2, pin2); |
1da177e4 | 2215 | else |
fcfd636a | 2216 | add_pin_to_irq(0, apic2, pin2); |
1da177e4 LT |
2217 | if (nmi_watchdog == NMI_IO_APIC) { |
2218 | setup_nmi(); | |
1da177e4 LT |
2219 | } |
2220 | return; | |
2221 | } | |
2222 | /* | |
2223 | * Cleanup, just in case ... | |
2224 | */ | |
fcfd636a | 2225 | clear_IO_APIC_pin(apic2, pin2); |
1da177e4 LT |
2226 | } |
2227 | printk(" failed.\n"); | |
2228 | ||
2229 | if (nmi_watchdog == NMI_IO_APIC) { | |
2230 | printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n"); | |
2231 | nmi_watchdog = 0; | |
2232 | } | |
2233 | ||
2234 | printk(KERN_INFO "...trying to set up timer as Virtual Wire IRQ..."); | |
2235 | ||
2236 | disable_8259A_irq(0); | |
f5b9ed7a | 2237 | set_irq_chip_and_handler(0, &lapic_chip, handle_fasteoi_irq); |
1da177e4 LT |
2238 | apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */ |
2239 | enable_8259A_irq(0); | |
2240 | ||
2241 | if (timer_irq_works()) { | |
2242 | printk(" works.\n"); | |
2243 | return; | |
2244 | } | |
2245 | apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector); | |
2246 | printk(" failed.\n"); | |
2247 | ||
2248 | printk(KERN_INFO "...trying to set up timer as ExtINT IRQ..."); | |
2249 | ||
2250 | timer_ack = 0; | |
2251 | init_8259A(0); | |
2252 | make_8259A_irq(0); | |
2253 | apic_write_around(APIC_LVT0, APIC_DM_EXTINT); | |
2254 | ||
2255 | unlock_ExtINT_logic(); | |
2256 | ||
2257 | if (timer_irq_works()) { | |
2258 | printk(" works.\n"); | |
2259 | return; | |
2260 | } | |
2261 | printk(" failed :(.\n"); | |
2262 | panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a " | |
2263 | "report. Then try booting with the 'noapic' option"); | |
2264 | } | |
2265 | ||
2266 | /* | |
2267 | * | |
2268 | * IRQ's that are handled by the PIC in the MPS IOAPIC case. | |
2269 | * - IRQ2 is the cascade IRQ, and cannot be a io-apic IRQ. | |
2270 | * Linux doesn't really care, as it's not actually used | |
2271 | * for any interrupt handling anyway. | |
2272 | */ | |
2273 | #define PIC_IRQS (1 << PIC_CASCADE_IR) | |
2274 | ||
2275 | void __init setup_IO_APIC(void) | |
2276 | { | |
2277 | enable_IO_APIC(); | |
2278 | ||
2279 | if (acpi_ioapic) | |
2280 | io_apic_irqs = ~0; /* all IRQs go through IOAPIC */ | |
2281 | else | |
2282 | io_apic_irqs = ~PIC_IRQS; | |
2283 | ||
2284 | printk("ENABLING IO-APIC IRQs\n"); | |
2285 | ||
2286 | /* | |
2287 | * Set up IO-APIC IRQ routing. | |
2288 | */ | |
2289 | if (!acpi_ioapic) | |
2290 | setup_ioapic_ids_from_mpc(); | |
2291 | sync_Arb_IDs(); | |
2292 | setup_IO_APIC_irqs(); | |
2293 | init_IO_APIC_traps(); | |
1e4c85f9 | 2294 | check_timer(); |
1da177e4 LT |
2295 | if (!acpi_ioapic) |
2296 | print_IO_APIC(); | |
2297 | } | |
2298 | ||
f9262c12 AK |
2299 | static int __init setup_disable_8254_timer(char *s) |
2300 | { | |
2301 | timer_over_8254 = -1; | |
2302 | return 1; | |
2303 | } | |
2304 | static int __init setup_enable_8254_timer(char *s) | |
2305 | { | |
2306 | timer_over_8254 = 2; | |
2307 | return 1; | |
2308 | } | |
2309 | ||
2310 | __setup("disable_8254_timer", setup_disable_8254_timer); | |
2311 | __setup("enable_8254_timer", setup_enable_8254_timer); | |
2312 | ||
1da177e4 LT |
2313 | /* |
2314 | * Called after all the initialization is done. If we didnt find any | |
2315 | * APIC bugs then we can allow the modify fast path | |
2316 | */ | |
2317 | ||
2318 | static int __init io_apic_bug_finalize(void) | |
2319 | { | |
2320 | if(sis_apic_bug == -1) | |
2321 | sis_apic_bug = 0; | |
2322 | return 0; | |
2323 | } | |
2324 | ||
2325 | late_initcall(io_apic_bug_finalize); | |
2326 | ||
2327 | struct sysfs_ioapic_data { | |
2328 | struct sys_device dev; | |
2329 | struct IO_APIC_route_entry entry[0]; | |
2330 | }; | |
2331 | static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS]; | |
2332 | ||
438510f6 | 2333 | static int ioapic_suspend(struct sys_device *dev, pm_message_t state) |
1da177e4 LT |
2334 | { |
2335 | struct IO_APIC_route_entry *entry; | |
2336 | struct sysfs_ioapic_data *data; | |
1da177e4 LT |
2337 | int i; |
2338 | ||
2339 | data = container_of(dev, struct sysfs_ioapic_data, dev); | |
2340 | entry = data->entry; | |
cf4c6a2f AK |
2341 | for (i = 0; i < nr_ioapic_registers[dev->id]; i ++) |
2342 | entry[i] = ioapic_read_entry(dev->id, i); | |
1da177e4 LT |
2343 | |
2344 | return 0; | |
2345 | } | |
2346 | ||
2347 | static int ioapic_resume(struct sys_device *dev) | |
2348 | { | |
2349 | struct IO_APIC_route_entry *entry; | |
2350 | struct sysfs_ioapic_data *data; | |
2351 | unsigned long flags; | |
2352 | union IO_APIC_reg_00 reg_00; | |
2353 | int i; | |
2354 | ||
2355 | data = container_of(dev, struct sysfs_ioapic_data, dev); | |
2356 | entry = data->entry; | |
2357 | ||
2358 | spin_lock_irqsave(&ioapic_lock, flags); | |
2359 | reg_00.raw = io_apic_read(dev->id, 0); | |
2360 | if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) { | |
2361 | reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid; | |
2362 | io_apic_write(dev->id, 0, reg_00.raw); | |
2363 | } | |
1da177e4 | 2364 | spin_unlock_irqrestore(&ioapic_lock, flags); |
cf4c6a2f AK |
2365 | for (i = 0; i < nr_ioapic_registers[dev->id]; i ++) |
2366 | ioapic_write_entry(dev->id, i, entry[i]); | |
1da177e4 LT |
2367 | |
2368 | return 0; | |
2369 | } | |
2370 | ||
2371 | static struct sysdev_class ioapic_sysdev_class = { | |
2372 | set_kset_name("ioapic"), | |
2373 | .suspend = ioapic_suspend, | |
2374 | .resume = ioapic_resume, | |
2375 | }; | |
2376 | ||
2377 | static int __init ioapic_init_sysfs(void) | |
2378 | { | |
2379 | struct sys_device * dev; | |
2380 | int i, size, error = 0; | |
2381 | ||
2382 | error = sysdev_class_register(&ioapic_sysdev_class); | |
2383 | if (error) | |
2384 | return error; | |
2385 | ||
2386 | for (i = 0; i < nr_ioapics; i++ ) { | |
2387 | size = sizeof(struct sys_device) + nr_ioapic_registers[i] | |
2388 | * sizeof(struct IO_APIC_route_entry); | |
2389 | mp_ioapic_data[i] = kmalloc(size, GFP_KERNEL); | |
2390 | if (!mp_ioapic_data[i]) { | |
2391 | printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i); | |
2392 | continue; | |
2393 | } | |
2394 | memset(mp_ioapic_data[i], 0, size); | |
2395 | dev = &mp_ioapic_data[i]->dev; | |
2396 | dev->id = i; | |
2397 | dev->cls = &ioapic_sysdev_class; | |
2398 | error = sysdev_register(dev); | |
2399 | if (error) { | |
2400 | kfree(mp_ioapic_data[i]); | |
2401 | mp_ioapic_data[i] = NULL; | |
2402 | printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i); | |
2403 | continue; | |
2404 | } | |
2405 | } | |
2406 | ||
2407 | return 0; | |
2408 | } | |
2409 | ||
2410 | device_initcall(ioapic_init_sysfs); | |
2411 | ||
3fc471ed EB |
2412 | #ifdef CONFIG_PCI_MSI |
2413 | /* | |
2414 | * Dynamic irq allocate and deallocation for MSI | |
2415 | */ | |
2416 | int create_irq(void) | |
2417 | { | |
ace80ab7 EB |
2418 | /* Allocate an unused irq */ |
2419 | int irq, new, vector; | |
3fc471ed | 2420 | unsigned long flags; |
3fc471ed | 2421 | |
ace80ab7 EB |
2422 | irq = -ENOSPC; |
2423 | spin_lock_irqsave(&vector_lock, flags); | |
2424 | for (new = (NR_IRQS - 1); new >= 0; new--) { | |
2425 | if (platform_legacy_irq(new)) | |
2426 | continue; | |
2427 | if (irq_vector[new] != 0) | |
2428 | continue; | |
2429 | vector = __assign_irq_vector(new); | |
2430 | if (likely(vector > 0)) | |
2431 | irq = new; | |
2432 | break; | |
2433 | } | |
2434 | spin_unlock_irqrestore(&vector_lock, flags); | |
3fc471ed | 2435 | |
ace80ab7 | 2436 | if (irq >= 0) { |
3fc471ed | 2437 | set_intr_gate(vector, interrupt[irq]); |
3fc471ed EB |
2438 | dynamic_irq_init(irq); |
2439 | } | |
2440 | return irq; | |
2441 | } | |
2442 | ||
2443 | void destroy_irq(unsigned int irq) | |
2444 | { | |
2445 | unsigned long flags; | |
3fc471ed EB |
2446 | |
2447 | dynamic_irq_cleanup(irq); | |
2448 | ||
2449 | spin_lock_irqsave(&vector_lock, flags); | |
3fc471ed EB |
2450 | irq_vector[irq] = 0; |
2451 | spin_unlock_irqrestore(&vector_lock, flags); | |
2452 | } | |
2453 | #endif /* CONFIG_PCI_MSI */ | |
2454 | ||
2d3fcc1c EB |
2455 | /* |
2456 | * MSI mesage composition | |
2457 | */ | |
2458 | #ifdef CONFIG_PCI_MSI | |
3b7d1921 | 2459 | static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg) |
2d3fcc1c | 2460 | { |
2d3fcc1c EB |
2461 | int vector; |
2462 | unsigned dest; | |
2463 | ||
2464 | vector = assign_irq_vector(irq); | |
2465 | if (vector >= 0) { | |
2466 | dest = cpu_mask_to_apicid(TARGET_CPUS); | |
2467 | ||
2468 | msg->address_hi = MSI_ADDR_BASE_HI; | |
2469 | msg->address_lo = | |
2470 | MSI_ADDR_BASE_LO | | |
2471 | ((INT_DEST_MODE == 0) ? | |
2472 | MSI_ADDR_DEST_MODE_PHYSICAL: | |
2473 | MSI_ADDR_DEST_MODE_LOGICAL) | | |
2474 | ((INT_DELIVERY_MODE != dest_LowestPrio) ? | |
2475 | MSI_ADDR_REDIRECTION_CPU: | |
2476 | MSI_ADDR_REDIRECTION_LOWPRI) | | |
2477 | MSI_ADDR_DEST_ID(dest); | |
2478 | ||
2479 | msg->data = | |
2480 | MSI_DATA_TRIGGER_EDGE | | |
2481 | MSI_DATA_LEVEL_ASSERT | | |
2482 | ((INT_DELIVERY_MODE != dest_LowestPrio) ? | |
2483 | MSI_DATA_DELIVERY_FIXED: | |
2484 | MSI_DATA_DELIVERY_LOWPRI) | | |
2485 | MSI_DATA_VECTOR(vector); | |
2486 | } | |
2487 | return vector; | |
2488 | } | |
2489 | ||
3b7d1921 EB |
2490 | #ifdef CONFIG_SMP |
2491 | static void set_msi_irq_affinity(unsigned int irq, cpumask_t mask) | |
2d3fcc1c | 2492 | { |
3b7d1921 EB |
2493 | struct msi_msg msg; |
2494 | unsigned int dest; | |
2495 | cpumask_t tmp; | |
2d3fcc1c | 2496 | int vector; |
3b7d1921 EB |
2497 | |
2498 | cpus_and(tmp, mask, cpu_online_map); | |
2499 | if (cpus_empty(tmp)) | |
2500 | tmp = TARGET_CPUS; | |
2d3fcc1c EB |
2501 | |
2502 | vector = assign_irq_vector(irq); | |
3b7d1921 EB |
2503 | if (vector < 0) |
2504 | return; | |
2d3fcc1c | 2505 | |
3b7d1921 EB |
2506 | dest = cpu_mask_to_apicid(mask); |
2507 | ||
2508 | read_msi_msg(irq, &msg); | |
2509 | ||
2510 | msg.data &= ~MSI_DATA_VECTOR_MASK; | |
2511 | msg.data |= MSI_DATA_VECTOR(vector); | |
2512 | msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK; | |
2513 | msg.address_lo |= MSI_ADDR_DEST_ID(dest); | |
2514 | ||
2515 | write_msi_msg(irq, &msg); | |
2516 | set_native_irq_info(irq, mask); | |
2d3fcc1c | 2517 | } |
3b7d1921 | 2518 | #endif /* CONFIG_SMP */ |
2d3fcc1c | 2519 | |
3b7d1921 EB |
2520 | /* |
2521 | * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices, | |
2522 | * which implement the MSI or MSI-X Capability Structure. | |
2523 | */ | |
2524 | static struct irq_chip msi_chip = { | |
2525 | .name = "PCI-MSI", | |
2526 | .unmask = unmask_msi_irq, | |
2527 | .mask = mask_msi_irq, | |
2528 | .ack = ack_ioapic_irq, | |
2529 | #ifdef CONFIG_SMP | |
2530 | .set_affinity = set_msi_irq_affinity, | |
2531 | #endif | |
2532 | .retrigger = ioapic_retrigger_irq, | |
2d3fcc1c EB |
2533 | }; |
2534 | ||
3b7d1921 EB |
2535 | int arch_setup_msi_irq(unsigned int irq, struct pci_dev *dev) |
2536 | { | |
2537 | struct msi_msg msg; | |
2538 | int ret; | |
2539 | ret = msi_compose_msg(dev, irq, &msg); | |
2540 | if (ret < 0) | |
2541 | return ret; | |
2542 | ||
2543 | write_msi_msg(irq, &msg); | |
2544 | ||
2545 | set_irq_chip_and_handler(irq, &msi_chip, handle_edge_irq); | |
2546 | ||
2547 | return 0; | |
2548 | } | |
2549 | ||
2550 | void arch_teardown_msi_irq(unsigned int irq) | |
2551 | { | |
2552 | return; | |
2553 | } | |
2554 | ||
2d3fcc1c EB |
2555 | #endif /* CONFIG_PCI_MSI */ |
2556 | ||
8b955b0d EB |
2557 | /* |
2558 | * Hypertransport interrupt support | |
2559 | */ | |
2560 | #ifdef CONFIG_HT_IRQ | |
2561 | ||
2562 | #ifdef CONFIG_SMP | |
2563 | ||
2564 | static void target_ht_irq(unsigned int irq, unsigned int dest) | |
2565 | { | |
2566 | u32 low, high; | |
2567 | low = read_ht_irq_low(irq); | |
2568 | high = read_ht_irq_high(irq); | |
2569 | ||
2570 | low &= ~(HT_IRQ_LOW_DEST_ID_MASK); | |
2571 | high &= ~(HT_IRQ_HIGH_DEST_ID_MASK); | |
2572 | ||
2573 | low |= HT_IRQ_LOW_DEST_ID(dest); | |
2574 | high |= HT_IRQ_HIGH_DEST_ID(dest); | |
2575 | ||
2576 | write_ht_irq_low(irq, low); | |
2577 | write_ht_irq_high(irq, high); | |
2578 | } | |
2579 | ||
2580 | static void set_ht_irq_affinity(unsigned int irq, cpumask_t mask) | |
2581 | { | |
2582 | unsigned int dest; | |
2583 | cpumask_t tmp; | |
2584 | ||
2585 | cpus_and(tmp, mask, cpu_online_map); | |
2586 | if (cpus_empty(tmp)) | |
2587 | tmp = TARGET_CPUS; | |
2588 | ||
2589 | cpus_and(mask, tmp, CPU_MASK_ALL); | |
2590 | ||
2591 | dest = cpu_mask_to_apicid(mask); | |
2592 | ||
2593 | target_ht_irq(irq, dest); | |
2594 | set_native_irq_info(irq, mask); | |
2595 | } | |
2596 | #endif | |
2597 | ||
2598 | static struct hw_interrupt_type ht_irq_chip = { | |
2599 | .name = "PCI-HT", | |
2600 | .mask = mask_ht_irq, | |
2601 | .unmask = unmask_ht_irq, | |
2602 | .ack = ack_ioapic_irq, | |
2603 | #ifdef CONFIG_SMP | |
2604 | .set_affinity = set_ht_irq_affinity, | |
2605 | #endif | |
2606 | .retrigger = ioapic_retrigger_irq, | |
2607 | }; | |
2608 | ||
2609 | int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev) | |
2610 | { | |
2611 | int vector; | |
2612 | ||
2613 | vector = assign_irq_vector(irq); | |
2614 | if (vector >= 0) { | |
2615 | u32 low, high; | |
2616 | unsigned dest; | |
2617 | cpumask_t tmp; | |
2618 | ||
2619 | cpus_clear(tmp); | |
2620 | cpu_set(vector >> 8, tmp); | |
2621 | dest = cpu_mask_to_apicid(tmp); | |
2622 | ||
2623 | high = HT_IRQ_HIGH_DEST_ID(dest); | |
2624 | ||
2625 | low = HT_IRQ_LOW_BASE | | |
2626 | HT_IRQ_LOW_DEST_ID(dest) | | |
2627 | HT_IRQ_LOW_VECTOR(vector) | | |
2628 | ((INT_DEST_MODE == 0) ? | |
2629 | HT_IRQ_LOW_DM_PHYSICAL : | |
2630 | HT_IRQ_LOW_DM_LOGICAL) | | |
2631 | HT_IRQ_LOW_RQEOI_EDGE | | |
2632 | ((INT_DELIVERY_MODE != dest_LowestPrio) ? | |
2633 | HT_IRQ_LOW_MT_FIXED : | |
2634 | HT_IRQ_LOW_MT_ARBITRATED) | | |
2635 | HT_IRQ_LOW_IRQ_MASKED; | |
2636 | ||
2637 | write_ht_irq_low(irq, low); | |
2638 | write_ht_irq_high(irq, high); | |
2639 | ||
2640 | set_irq_chip_and_handler(irq, &ht_irq_chip, handle_edge_irq); | |
2641 | } | |
2642 | return vector; | |
2643 | } | |
2644 | #endif /* CONFIG_HT_IRQ */ | |
2645 | ||
1da177e4 LT |
2646 | /* -------------------------------------------------------------------------- |
2647 | ACPI-based IOAPIC Configuration | |
2648 | -------------------------------------------------------------------------- */ | |
2649 | ||
888ba6c6 | 2650 | #ifdef CONFIG_ACPI |
1da177e4 LT |
2651 | |
2652 | int __init io_apic_get_unique_id (int ioapic, int apic_id) | |
2653 | { | |
2654 | union IO_APIC_reg_00 reg_00; | |
2655 | static physid_mask_t apic_id_map = PHYSID_MASK_NONE; | |
2656 | physid_mask_t tmp; | |
2657 | unsigned long flags; | |
2658 | int i = 0; | |
2659 | ||
2660 | /* | |
2661 | * The P4 platform supports up to 256 APIC IDs on two separate APIC | |
2662 | * buses (one for LAPICs, one for IOAPICs), where predecessors only | |
2663 | * supports up to 16 on one shared APIC bus. | |
2664 | * | |
2665 | * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full | |
2666 | * advantage of new APIC bus architecture. | |
2667 | */ | |
2668 | ||
2669 | if (physids_empty(apic_id_map)) | |
2670 | apic_id_map = ioapic_phys_id_map(phys_cpu_present_map); | |
2671 | ||
2672 | spin_lock_irqsave(&ioapic_lock, flags); | |
2673 | reg_00.raw = io_apic_read(ioapic, 0); | |
2674 | spin_unlock_irqrestore(&ioapic_lock, flags); | |
2675 | ||
2676 | if (apic_id >= get_physical_broadcast()) { | |
2677 | printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying " | |
2678 | "%d\n", ioapic, apic_id, reg_00.bits.ID); | |
2679 | apic_id = reg_00.bits.ID; | |
2680 | } | |
2681 | ||
2682 | /* | |
2683 | * Every APIC in a system must have a unique ID or we get lots of nice | |
2684 | * 'stuck on smp_invalidate_needed IPI wait' messages. | |
2685 | */ | |
2686 | if (check_apicid_used(apic_id_map, apic_id)) { | |
2687 | ||
2688 | for (i = 0; i < get_physical_broadcast(); i++) { | |
2689 | if (!check_apicid_used(apic_id_map, i)) | |
2690 | break; | |
2691 | } | |
2692 | ||
2693 | if (i == get_physical_broadcast()) | |
2694 | panic("Max apic_id exceeded!\n"); | |
2695 | ||
2696 | printk(KERN_WARNING "IOAPIC[%d]: apic_id %d already used, " | |
2697 | "trying %d\n", ioapic, apic_id, i); | |
2698 | ||
2699 | apic_id = i; | |
2700 | } | |
2701 | ||
2702 | tmp = apicid_to_cpu_present(apic_id); | |
2703 | physids_or(apic_id_map, apic_id_map, tmp); | |
2704 | ||
2705 | if (reg_00.bits.ID != apic_id) { | |
2706 | reg_00.bits.ID = apic_id; | |
2707 | ||
2708 | spin_lock_irqsave(&ioapic_lock, flags); | |
2709 | io_apic_write(ioapic, 0, reg_00.raw); | |
2710 | reg_00.raw = io_apic_read(ioapic, 0); | |
2711 | spin_unlock_irqrestore(&ioapic_lock, flags); | |
2712 | ||
2713 | /* Sanity check */ | |
6070f9ec AD |
2714 | if (reg_00.bits.ID != apic_id) { |
2715 | printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic); | |
2716 | return -1; | |
2717 | } | |
1da177e4 LT |
2718 | } |
2719 | ||
2720 | apic_printk(APIC_VERBOSE, KERN_INFO | |
2721 | "IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id); | |
2722 | ||
2723 | return apic_id; | |
2724 | } | |
2725 | ||
2726 | ||
2727 | int __init io_apic_get_version (int ioapic) | |
2728 | { | |
2729 | union IO_APIC_reg_01 reg_01; | |
2730 | unsigned long flags; | |
2731 | ||
2732 | spin_lock_irqsave(&ioapic_lock, flags); | |
2733 | reg_01.raw = io_apic_read(ioapic, 1); | |
2734 | spin_unlock_irqrestore(&ioapic_lock, flags); | |
2735 | ||
2736 | return reg_01.bits.version; | |
2737 | } | |
2738 | ||
2739 | ||
2740 | int __init io_apic_get_redir_entries (int ioapic) | |
2741 | { | |
2742 | union IO_APIC_reg_01 reg_01; | |
2743 | unsigned long flags; | |
2744 | ||
2745 | spin_lock_irqsave(&ioapic_lock, flags); | |
2746 | reg_01.raw = io_apic_read(ioapic, 1); | |
2747 | spin_unlock_irqrestore(&ioapic_lock, flags); | |
2748 | ||
2749 | return reg_01.bits.entries; | |
2750 | } | |
2751 | ||
2752 | ||
2753 | int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low) | |
2754 | { | |
2755 | struct IO_APIC_route_entry entry; | |
2756 | unsigned long flags; | |
2757 | ||
2758 | if (!IO_APIC_IRQ(irq)) { | |
2759 | printk(KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n", | |
2760 | ioapic); | |
2761 | return -EINVAL; | |
2762 | } | |
2763 | ||
2764 | /* | |
2765 | * Generate a PCI IRQ routing entry and program the IOAPIC accordingly. | |
2766 | * Note that we mask (disable) IRQs now -- these get enabled when the | |
2767 | * corresponding device driver registers for this IRQ. | |
2768 | */ | |
2769 | ||
2770 | memset(&entry,0,sizeof(entry)); | |
2771 | ||
2772 | entry.delivery_mode = INT_DELIVERY_MODE; | |
2773 | entry.dest_mode = INT_DEST_MODE; | |
2774 | entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); | |
2775 | entry.trigger = edge_level; | |
2776 | entry.polarity = active_high_low; | |
2777 | entry.mask = 1; | |
2778 | ||
2779 | /* | |
2780 | * IRQs < 16 are already in the irq_2_pin[] map | |
2781 | */ | |
2782 | if (irq >= 16) | |
2783 | add_pin_to_irq(irq, ioapic, pin); | |
2784 | ||
2785 | entry.vector = assign_irq_vector(irq); | |
2786 | ||
2787 | apic_printk(APIC_DEBUG, KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry " | |
2788 | "(%d-%d -> 0x%x -> IRQ %d Mode:%i Active:%i)\n", ioapic, | |
2789 | mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq, | |
2790 | edge_level, active_high_low); | |
2791 | ||
2792 | ioapic_register_intr(irq, entry.vector, edge_level); | |
2793 | ||
2794 | if (!ioapic && (irq < 16)) | |
2795 | disable_8259A_irq(irq); | |
2796 | ||
cf4c6a2f | 2797 | ioapic_write_entry(ioapic, pin, entry); |
1da177e4 | 2798 | spin_lock_irqsave(&ioapic_lock, flags); |
ace80ab7 | 2799 | set_native_irq_info(irq, TARGET_CPUS); |
1da177e4 LT |
2800 | spin_unlock_irqrestore(&ioapic_lock, flags); |
2801 | ||
2802 | return 0; | |
2803 | } | |
2804 | ||
888ba6c6 | 2805 | #endif /* CONFIG_ACPI */ |
1a3f239d RR |
2806 | |
2807 | static int __init parse_disable_timer_pin_1(char *arg) | |
2808 | { | |
2809 | disable_timer_pin_1 = 1; | |
2810 | return 0; | |
2811 | } | |
2812 | early_param("disable_timer_pin_1", parse_disable_timer_pin_1); | |
2813 | ||
2814 | static int __init parse_enable_timer_pin_1(char *arg) | |
2815 | { | |
2816 | disable_timer_pin_1 = -1; | |
2817 | return 0; | |
2818 | } | |
2819 | early_param("enable_timer_pin_1", parse_enable_timer_pin_1); | |
2820 | ||
2821 | static int __init parse_noapic(char *arg) | |
2822 | { | |
2823 | /* disable IO-APIC */ | |
2824 | disable_ioapic_setup(); | |
2825 | return 0; | |
2826 | } | |
2827 | early_param("noapic", parse_noapic); |