Commit | Line | Data |
---|---|---|
51533b61 | 1 | /* |
e908dfc3 | 2 | * Simple synchronous serial port driver for ETRAX FS and Artpec-3. |
51533b61 MS |
3 | * |
4 | * Copyright (c) 2005 Axis Communications AB | |
5 | * | |
6 | * Author: Mikael Starvik | |
7 | * | |
8 | */ | |
9 | ||
10 | #include <linux/module.h> | |
11 | #include <linux/kernel.h> | |
51533b61 MS |
12 | #include <linux/types.h> |
13 | #include <linux/errno.h> | |
14 | #include <linux/major.h> | |
15 | #include <linux/sched.h> | |
0c401df3 | 16 | #include <linux/smp_lock.h> |
51533b61 MS |
17 | #include <linux/interrupt.h> |
18 | #include <linux/poll.h> | |
19 | #include <linux/init.h> | |
20 | #include <linux/timer.h> | |
21 | #include <linux/spinlock.h> | |
22 | ||
23 | #include <asm/io.h> | |
e908dfc3 JN |
24 | #include <dma.h> |
25 | #include <pinmux.h> | |
26 | #include <hwregs/reg_rdwr.h> | |
27 | #include <hwregs/sser_defs.h> | |
28 | #include <hwregs/dma_defs.h> | |
29 | #include <hwregs/dma.h> | |
30 | #include <hwregs/intr_vect_defs.h> | |
31 | #include <hwregs/intr_vect.h> | |
32 | #include <hwregs/reg_map.h> | |
51533b61 MS |
33 | #include <asm/sync_serial.h> |
34 | ||
e908dfc3 | 35 | |
51533b61 MS |
36 | /* The receiver is a bit tricky beacuse of the continuous stream of data.*/ |
37 | /* */ | |
38 | /* Three DMA descriptors are linked together. Each DMA descriptor is */ | |
39 | /* responsible for port->bufchunk of a common buffer. */ | |
40 | /* */ | |
41 | /* +---------------------------------------------+ */ | |
42 | /* | +----------+ +----------+ +----------+ | */ | |
43 | /* +-> | Descr[0] |-->| Descr[1] |-->| Descr[2] |-+ */ | |
44 | /* +----------+ +----------+ +----------+ */ | |
45 | /* | | | */ | |
46 | /* v v v */ | |
47 | /* +-------------------------------------+ */ | |
48 | /* | BUFFER | */ | |
49 | /* +-------------------------------------+ */ | |
50 | /* |<- data_avail ->| */ | |
51 | /* readp writep */ | |
52 | /* */ | |
53 | /* If the application keeps up the pace readp will be right after writep.*/ | |
54 | /* If the application can't keep the pace we have to throw away data. */ | |
55 | /* The idea is that readp should be ready with the data pointed out by */ | |
56 | /* Descr[i] when the DMA has filled in Descr[i+1]. */ | |
57 | /* Otherwise we will discard */ | |
58 | /* the rest of the data pointed out by Descr1 and set readp to the start */ | |
59 | /* of Descr2 */ | |
60 | ||
61 | #define SYNC_SERIAL_MAJOR 125 | |
62 | ||
63 | /* IN_BUFFER_SIZE should be a multiple of 6 to make sure that 24 bit */ | |
64 | /* words can be handled */ | |
65 | #define IN_BUFFER_SIZE 12288 | |
66 | #define IN_DESCR_SIZE 256 | |
e908dfc3 JN |
67 | #define NBR_IN_DESCR (IN_BUFFER_SIZE/IN_DESCR_SIZE) |
68 | ||
69 | #define OUT_BUFFER_SIZE 1024*8 | |
70 | #define NBR_OUT_DESCR 8 | |
51533b61 MS |
71 | |
72 | #define DEFAULT_FRAME_RATE 0 | |
73 | #define DEFAULT_WORD_RATE 7 | |
74 | ||
75 | /* NOTE: Enabling some debug will likely cause overrun or underrun, | |
76 | * especially if manual mode is use. | |
77 | */ | |
78 | #define DEBUG(x) | |
79 | #define DEBUGREAD(x) | |
80 | #define DEBUGWRITE(x) | |
81 | #define DEBUGPOLL(x) | |
82 | #define DEBUGRXINT(x) | |
83 | #define DEBUGTXINT(x) | |
e908dfc3 JN |
84 | #define DEBUGTRDMA(x) |
85 | #define DEBUGOUTBUF(x) | |
51533b61 MS |
86 | |
87 | typedef struct sync_port | |
88 | { | |
89 | reg_scope_instances regi_sser; | |
90 | reg_scope_instances regi_dmain; | |
91 | reg_scope_instances regi_dmaout; | |
92 | ||
93 | char started; /* 1 if port has been started */ | |
94 | char port_nbr; /* Port 0 or 1 */ | |
95 | char busy; /* 1 if port is busy */ | |
96 | ||
97 | char enabled; /* 1 if port is enabled */ | |
98 | char use_dma; /* 1 if port uses dma */ | |
99 | char tr_running; | |
100 | ||
101 | char init_irqs; | |
102 | int output; | |
103 | int input; | |
104 | ||
e908dfc3 JN |
105 | /* Next byte to be read by application */ |
106 | volatile unsigned char *volatile readp; | |
107 | /* Next byte to be written by etrax */ | |
108 | volatile unsigned char *volatile writep; | |
109 | ||
51533b61 MS |
110 | unsigned int in_buffer_size; |
111 | unsigned int inbufchunk; | |
112 | unsigned char out_buffer[OUT_BUFFER_SIZE] __attribute__ ((aligned(32))); | |
113 | unsigned char in_buffer[IN_BUFFER_SIZE]__attribute__ ((aligned(32))); | |
114 | unsigned char flip[IN_BUFFER_SIZE] __attribute__ ((aligned(32))); | |
115 | struct dma_descr_data* next_rx_desc; | |
116 | struct dma_descr_data* prev_rx_desc; | |
e908dfc3 JN |
117 | |
118 | /* Pointer to the first available descriptor in the ring, | |
119 | * unless active_tr_descr == catch_tr_descr and a dma | |
120 | * transfer is active */ | |
121 | struct dma_descr_data *active_tr_descr; | |
122 | ||
123 | /* Pointer to the first allocated descriptor in the ring */ | |
124 | struct dma_descr_data *catch_tr_descr; | |
125 | ||
126 | /* Pointer to the descriptor with the current end-of-list */ | |
127 | struct dma_descr_data *prev_tr_descr; | |
51533b61 MS |
128 | int full; |
129 | ||
e908dfc3 JN |
130 | /* Pointer to the first byte being read by DMA |
131 | * or current position in out_buffer if not using DMA. */ | |
132 | unsigned char *out_rd_ptr; | |
133 | ||
134 | /* Number of bytes currently locked for being read by DMA */ | |
135 | int out_buf_count; | |
136 | ||
137 | dma_descr_data in_descr[NBR_IN_DESCR] __attribute__ ((__aligned__(16))); | |
51533b61 | 138 | dma_descr_context in_context __attribute__ ((__aligned__(32))); |
e908dfc3 JN |
139 | dma_descr_data out_descr[NBR_OUT_DESCR] |
140 | __attribute__ ((__aligned__(16))); | |
51533b61 MS |
141 | dma_descr_context out_context __attribute__ ((__aligned__(32))); |
142 | wait_queue_head_t out_wait_q; | |
143 | wait_queue_head_t in_wait_q; | |
144 | ||
145 | spinlock_t lock; | |
146 | } sync_port; | |
147 | ||
148 | static int etrax_sync_serial_init(void); | |
149 | static void initialize_port(int portnbr); | |
150 | static inline int sync_data_avail(struct sync_port *port); | |
151 | ||
152 | static int sync_serial_open(struct inode *, struct file*); | |
153 | static int sync_serial_release(struct inode*, struct file*); | |
154 | static unsigned int sync_serial_poll(struct file *filp, poll_table *wait); | |
155 | ||
156 | static int sync_serial_ioctl(struct inode*, struct file*, | |
157 | unsigned int cmd, unsigned long arg); | |
158 | static ssize_t sync_serial_write(struct file * file, const char * buf, | |
159 | size_t count, loff_t *ppos); | |
160 | static ssize_t sync_serial_read(struct file *file, char *buf, | |
161 | size_t count, loff_t *ppos); | |
162 | ||
163 | #if (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \ | |
164 | defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)) || \ | |
165 | (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) && \ | |
166 | defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA)) | |
167 | #define SYNC_SER_DMA | |
168 | #endif | |
169 | ||
170 | static void send_word(sync_port* port); | |
e908dfc3 | 171 | static void start_dma_out(struct sync_port *port, const char *data, int count); |
51533b61 MS |
172 | static void start_dma_in(sync_port* port); |
173 | #ifdef SYNC_SER_DMA | |
e908dfc3 JN |
174 | static irqreturn_t tr_interrupt(int irq, void *dev_id); |
175 | static irqreturn_t rx_interrupt(int irq, void *dev_id); | |
51533b61 MS |
176 | #endif |
177 | ||
178 | #if (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \ | |
179 | !defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)) || \ | |
180 | (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) && \ | |
181 | !defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA)) | |
182 | #define SYNC_SER_MANUAL | |
183 | #endif | |
184 | #ifdef SYNC_SER_MANUAL | |
e908dfc3 JN |
185 | static irqreturn_t manual_interrupt(int irq, void *dev_id); |
186 | #endif | |
187 | ||
188 | #ifdef CONFIG_ETRAXFS /* ETRAX FS */ | |
189 | #define OUT_DMA_NBR 4 | |
190 | #define IN_DMA_NBR 5 | |
191 | #define PINMUX_SSER pinmux_sser0 | |
192 | #define SYNCSER_INST regi_sser0 | |
193 | #define SYNCSER_INTR_VECT SSER0_INTR_VECT | |
194 | #define OUT_DMA_INST regi_dma4 | |
195 | #define IN_DMA_INST regi_dma5 | |
196 | #define DMA_OUT_INTR_VECT DMA4_INTR_VECT | |
197 | #define DMA_IN_INTR_VECT DMA5_INTR_VECT | |
198 | #define REQ_DMA_SYNCSER dma_sser0 | |
199 | #else /* Artpec-3 */ | |
200 | #define OUT_DMA_NBR 6 | |
201 | #define IN_DMA_NBR 7 | |
202 | #define PINMUX_SSER pinmux_sser | |
203 | #define SYNCSER_INST regi_sser | |
204 | #define SYNCSER_INTR_VECT SSER_INTR_VECT | |
205 | #define OUT_DMA_INST regi_dma6 | |
206 | #define IN_DMA_INST regi_dma7 | |
207 | #define DMA_OUT_INTR_VECT DMA6_INTR_VECT | |
208 | #define DMA_IN_INTR_VECT DMA7_INTR_VECT | |
209 | #define REQ_DMA_SYNCSER dma_sser | |
51533b61 MS |
210 | #endif |
211 | ||
212 | /* The ports */ | |
213 | static struct sync_port ports[]= | |
214 | { | |
215 | { | |
e908dfc3 JN |
216 | .regi_sser = SYNCSER_INST, |
217 | .regi_dmaout = OUT_DMA_INST, | |
218 | .regi_dmain = IN_DMA_INST, | |
51533b61 MS |
219 | #if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA) |
220 | .use_dma = 1, | |
221 | #else | |
222 | .use_dma = 0, | |
223 | #endif | |
e908dfc3 JN |
224 | } |
225 | #ifdef CONFIG_ETRAXFS | |
226 | , | |
227 | ||
51533b61 MS |
228 | { |
229 | .regi_sser = regi_sser1, | |
230 | .regi_dmaout = regi_dma6, | |
231 | .regi_dmain = regi_dma7, | |
232 | #if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA) | |
233 | .use_dma = 1, | |
234 | #else | |
235 | .use_dma = 0, | |
236 | #endif | |
237 | } | |
e908dfc3 | 238 | #endif |
51533b61 MS |
239 | }; |
240 | ||
e908dfc3 | 241 | #define NBR_PORTS ARRAY_SIZE(ports) |
51533b61 | 242 | |
5dfe4c96 | 243 | static const struct file_operations sync_serial_fops = { |
51533b61 MS |
244 | .owner = THIS_MODULE, |
245 | .write = sync_serial_write, | |
246 | .read = sync_serial_read, | |
247 | .poll = sync_serial_poll, | |
248 | .ioctl = sync_serial_ioctl, | |
249 | .open = sync_serial_open, | |
250 | .release = sync_serial_release | |
251 | }; | |
252 | ||
253 | static int __init etrax_sync_serial_init(void) | |
254 | { | |
255 | ports[0].enabled = 0; | |
e908dfc3 | 256 | #ifdef CONFIG_ETRAXFS |
51533b61 | 257 | ports[1].enabled = 0; |
e908dfc3 JN |
258 | #endif |
259 | if (register_chrdev(SYNC_SERIAL_MAJOR, "sync serial", | |
260 | &sync_serial_fops) < 0) { | |
261 | printk(KERN_WARNING | |
262 | "Unable to get major for synchronous serial port\n"); | |
51533b61 MS |
263 | return -EBUSY; |
264 | } | |
265 | ||
266 | /* Initialize Ports */ | |
267 | #if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) | |
e908dfc3 JN |
268 | if (crisv32_pinmux_alloc_fixed(PINMUX_SSER)) { |
269 | printk(KERN_WARNING | |
270 | "Unable to alloc pins for synchronous serial port 0\n"); | |
51533b61 MS |
271 | return -EIO; |
272 | } | |
273 | ports[0].enabled = 1; | |
274 | initialize_port(0); | |
275 | #endif | |
276 | ||
277 | #if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) | |
e908dfc3 JN |
278 | if (crisv32_pinmux_alloc_fixed(pinmux_sser1)) { |
279 | printk(KERN_WARNING | |
280 | "Unable to alloc pins for synchronous serial port 0\n"); | |
51533b61 MS |
281 | return -EIO; |
282 | } | |
283 | ports[1].enabled = 1; | |
284 | initialize_port(1); | |
285 | #endif | |
286 | ||
e908dfc3 JN |
287 | #ifdef CONFIG_ETRAXFS |
288 | printk(KERN_INFO "ETRAX FS synchronous serial port driver\n"); | |
289 | #else | |
290 | printk(KERN_INFO "Artpec-3 synchronous serial port driver\n"); | |
291 | #endif | |
51533b61 MS |
292 | return 0; |
293 | } | |
294 | ||
295 | static void __init initialize_port(int portnbr) | |
296 | { | |
e908dfc3 JN |
297 | int __attribute__((unused)) i; |
298 | struct sync_port *port = &ports[portnbr]; | |
51533b61 MS |
299 | reg_sser_rw_cfg cfg = {0}; |
300 | reg_sser_rw_frm_cfg frm_cfg = {0}; | |
301 | reg_sser_rw_tr_cfg tr_cfg = {0}; | |
302 | reg_sser_rw_rec_cfg rec_cfg = {0}; | |
303 | ||
e908dfc3 | 304 | DEBUG(printk(KERN_DEBUG "Init sync serial port %d\n", portnbr)); |
51533b61 MS |
305 | |
306 | port->port_nbr = portnbr; | |
307 | port->init_irqs = 1; | |
308 | ||
e908dfc3 JN |
309 | port->out_rd_ptr = port->out_buffer; |
310 | port->out_buf_count = 0; | |
311 | ||
51533b61 MS |
312 | port->output = 1; |
313 | port->input = 0; | |
314 | ||
315 | port->readp = port->flip; | |
316 | port->writep = port->flip; | |
317 | port->in_buffer_size = IN_BUFFER_SIZE; | |
318 | port->inbufchunk = IN_DESCR_SIZE; | |
319 | port->next_rx_desc = &port->in_descr[0]; | |
e908dfc3 | 320 | port->prev_rx_desc = &port->in_descr[NBR_IN_DESCR-1]; |
51533b61 MS |
321 | port->prev_rx_desc->eol = 1; |
322 | ||
323 | init_waitqueue_head(&port->out_wait_q); | |
324 | init_waitqueue_head(&port->in_wait_q); | |
325 | ||
326 | spin_lock_init(&port->lock); | |
327 | ||
328 | cfg.out_clk_src = regk_sser_intern_clk; | |
329 | cfg.out_clk_pol = regk_sser_pos; | |
330 | cfg.clk_od_mode = regk_sser_no; | |
331 | cfg.clk_dir = regk_sser_out; | |
332 | cfg.gate_clk = regk_sser_no; | |
333 | cfg.base_freq = regk_sser_f29_493; | |
334 | cfg.clk_div = 256; | |
335 | REG_WR(sser, port->regi_sser, rw_cfg, cfg); | |
336 | ||
337 | frm_cfg.wordrate = DEFAULT_WORD_RATE; | |
338 | frm_cfg.type = regk_sser_edge; | |
339 | frm_cfg.frame_pin_dir = regk_sser_out; | |
340 | frm_cfg.frame_pin_use = regk_sser_frm; | |
341 | frm_cfg.status_pin_dir = regk_sser_in; | |
342 | frm_cfg.status_pin_use = regk_sser_hold; | |
343 | frm_cfg.out_on = regk_sser_tr; | |
344 | frm_cfg.tr_delay = 1; | |
345 | REG_WR(sser, port->regi_sser, rw_frm_cfg, frm_cfg); | |
346 | ||
347 | tr_cfg.urun_stop = regk_sser_no; | |
348 | tr_cfg.sample_size = 7; | |
349 | tr_cfg.sh_dir = regk_sser_msbfirst; | |
350 | tr_cfg.use_dma = port->use_dma ? regk_sser_yes : regk_sser_no; | |
e908dfc3 | 351 | #if 0 |
51533b61 MS |
352 | tr_cfg.rate_ctrl = regk_sser_bulk; |
353 | tr_cfg.data_pin_use = regk_sser_dout; | |
e908dfc3 JN |
354 | #else |
355 | tr_cfg.rate_ctrl = regk_sser_iso; | |
356 | tr_cfg.data_pin_use = regk_sser_dout; | |
357 | #endif | |
51533b61 MS |
358 | tr_cfg.bulk_wspace = 1; |
359 | REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg); | |
360 | ||
361 | rec_cfg.sample_size = 7; | |
362 | rec_cfg.sh_dir = regk_sser_msbfirst; | |
363 | rec_cfg.use_dma = port->use_dma ? regk_sser_yes : regk_sser_no; | |
364 | rec_cfg.fifo_thr = regk_sser_inf; | |
365 | REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg); | |
e908dfc3 JN |
366 | |
367 | #ifdef SYNC_SER_DMA | |
368 | /* Setup the descriptor ring for dma out/transmit. */ | |
369 | for (i = 0; i < NBR_OUT_DESCR; i++) { | |
370 | port->out_descr[i].wait = 0; | |
371 | port->out_descr[i].intr = 1; | |
372 | port->out_descr[i].eol = 0; | |
373 | port->out_descr[i].out_eop = 0; | |
374 | port->out_descr[i].next = | |
375 | (dma_descr_data *)virt_to_phys(&port->out_descr[i+1]); | |
376 | } | |
377 | ||
378 | /* Create a ring from the list. */ | |
379 | port->out_descr[NBR_OUT_DESCR-1].next = | |
380 | (dma_descr_data *)virt_to_phys(&port->out_descr[0]); | |
381 | ||
382 | /* Setup context for traversing the ring. */ | |
383 | port->active_tr_descr = &port->out_descr[0]; | |
384 | port->prev_tr_descr = &port->out_descr[NBR_OUT_DESCR-1]; | |
385 | port->catch_tr_descr = &port->out_descr[0]; | |
386 | #endif | |
51533b61 MS |
387 | } |
388 | ||
389 | static inline int sync_data_avail(struct sync_port *port) | |
390 | { | |
391 | int avail; | |
392 | unsigned char *start; | |
393 | unsigned char *end; | |
394 | ||
395 | start = (unsigned char*)port->readp; /* cast away volatile */ | |
396 | end = (unsigned char*)port->writep; /* cast away volatile */ | |
397 | /* 0123456789 0123456789 | |
398 | * ----- - ----- | |
399 | * ^rp ^wp ^wp ^rp | |
400 | */ | |
401 | ||
e908dfc3 | 402 | if (end >= start) |
51533b61 MS |
403 | avail = end - start; |
404 | else | |
405 | avail = port->in_buffer_size - (start - end); | |
406 | return avail; | |
407 | } | |
408 | ||
409 | static inline int sync_data_avail_to_end(struct sync_port *port) | |
410 | { | |
411 | int avail; | |
412 | unsigned char *start; | |
413 | unsigned char *end; | |
414 | ||
415 | start = (unsigned char*)port->readp; /* cast away volatile */ | |
416 | end = (unsigned char*)port->writep; /* cast away volatile */ | |
417 | /* 0123456789 0123456789 | |
418 | * ----- ----- | |
419 | * ^rp ^wp ^wp ^rp | |
420 | */ | |
421 | ||
e908dfc3 | 422 | if (end >= start) |
51533b61 MS |
423 | avail = end - start; |
424 | else | |
425 | avail = port->flip + port->in_buffer_size - start; | |
426 | return avail; | |
427 | } | |
428 | ||
429 | static int sync_serial_open(struct inode *inode, struct file *file) | |
430 | { | |
32ea086b | 431 | int dev = iminor(inode); |
0c401df3 | 432 | int ret = -EBUSY; |
e908dfc3 | 433 | sync_port *port; |
51533b61 MS |
434 | reg_dma_rw_cfg cfg = {.en = regk_dma_yes}; |
435 | reg_dma_rw_intr_mask intr_mask = {.data = regk_dma_yes}; | |
436 | ||
0c401df3 | 437 | lock_kernel(); |
e908dfc3 | 438 | DEBUG(printk(KERN_DEBUG "Open sync serial port %d\n", dev)); |
51533b61 | 439 | |
e908dfc3 | 440 | if (dev < 0 || dev >= NBR_PORTS || !ports[dev].enabled) |
51533b61 | 441 | { |
e908dfc3 | 442 | DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev)); |
0c401df3 JC |
443 | ret = -ENODEV; |
444 | goto out; | |
51533b61 MS |
445 | } |
446 | port = &ports[dev]; | |
447 | /* Allow open this device twice (assuming one reader and one writer) */ | |
448 | if (port->busy == 2) | |
449 | { | |
e908dfc3 | 450 | DEBUG(printk(KERN_DEBUG "Device is busy.. \n")); |
0c401df3 | 451 | goto out; |
51533b61 | 452 | } |
e908dfc3 JN |
453 | |
454 | ||
51533b61 MS |
455 | if (port->init_irqs) { |
456 | if (port->use_dma) { | |
e908dfc3 | 457 | if (port == &ports[0]) { |
51533b61 | 458 | #ifdef SYNC_SER_DMA |
e908dfc3 JN |
459 | if (request_irq(DMA_OUT_INTR_VECT, |
460 | tr_interrupt, | |
461 | 0, | |
462 | "synchronous serial 0 dma tr", | |
463 | &ports[0])) { | |
51533b61 | 464 | printk(KERN_CRIT "Can't allocate sync serial port 0 IRQ"); |
0c401df3 | 465 | goto out; |
e908dfc3 JN |
466 | } else if (request_irq(DMA_IN_INTR_VECT, |
467 | rx_interrupt, | |
468 | 0, | |
469 | "synchronous serial 1 dma rx", | |
470 | &ports[0])) { | |
471 | free_irq(DMA_OUT_INTR_VECT, &port[0]); | |
51533b61 | 472 | printk(KERN_CRIT "Can't allocate sync serial port 0 IRQ"); |
0c401df3 | 473 | goto out; |
e908dfc3 JN |
474 | } else if (crisv32_request_dma(OUT_DMA_NBR, |
475 | "synchronous serial 0 dma tr", | |
476 | DMA_VERBOSE_ON_ERROR, | |
477 | 0, | |
478 | REQ_DMA_SYNCSER)) { | |
479 | free_irq(DMA_OUT_INTR_VECT, &port[0]); | |
480 | free_irq(DMA_IN_INTR_VECT, &port[0]); | |
51533b61 | 481 | printk(KERN_CRIT "Can't allocate sync serial port 0 TX DMA channel"); |
0c401df3 | 482 | goto out; |
e908dfc3 JN |
483 | } else if (crisv32_request_dma(IN_DMA_NBR, |
484 | "synchronous serial 0 dma rec", | |
485 | DMA_VERBOSE_ON_ERROR, | |
486 | 0, | |
487 | REQ_DMA_SYNCSER)) { | |
488 | crisv32_free_dma(OUT_DMA_NBR); | |
489 | free_irq(DMA_OUT_INTR_VECT, &port[0]); | |
490 | free_irq(DMA_IN_INTR_VECT, &port[0]); | |
51533b61 | 491 | printk(KERN_CRIT "Can't allocate sync serial port 1 RX DMA channel"); |
0c401df3 | 492 | goto out; |
51533b61 MS |
493 | } |
494 | #endif | |
495 | } | |
e908dfc3 JN |
496 | #ifdef CONFIG_ETRAXFS |
497 | else if (port == &ports[1]) { | |
51533b61 MS |
498 | #ifdef SYNC_SER_DMA |
499 | if (request_irq(DMA6_INTR_VECT, | |
500 | tr_interrupt, | |
501 | 0, | |
502 | "synchronous serial 1 dma tr", | |
503 | &ports[1])) { | |
504 | printk(KERN_CRIT "Can't allocate sync serial port 1 IRQ"); | |
0c401df3 | 505 | goto out; |
51533b61 MS |
506 | } else if (request_irq(DMA7_INTR_VECT, |
507 | rx_interrupt, | |
508 | 0, | |
509 | "synchronous serial 1 dma rx", | |
510 | &ports[1])) { | |
511 | free_irq(DMA6_INTR_VECT, &ports[1]); | |
512 | printk(KERN_CRIT "Can't allocate sync serial port 3 IRQ"); | |
0c401df3 | 513 | goto out; |
e908dfc3 JN |
514 | } else if (crisv32_request_dma( |
515 | SYNC_SER1_TX_DMA_NBR, | |
516 | "synchronous serial 1 dma tr", | |
517 | DMA_VERBOSE_ON_ERROR, | |
518 | 0, | |
519 | dma_sser1)) { | |
520 | free_irq(DMA6_INTR_VECT, &ports[1]); | |
521 | free_irq(DMA7_INTR_VECT, &ports[1]); | |
51533b61 | 522 | printk(KERN_CRIT "Can't allocate sync serial port 3 TX DMA channel"); |
0c401df3 | 523 | goto out; |
e908dfc3 JN |
524 | } else if (crisv32_request_dma( |
525 | SYNC_SER1_RX_DMA_NBR, | |
526 | "synchronous serial 3 dma rec", | |
527 | DMA_VERBOSE_ON_ERROR, | |
528 | 0, | |
529 | dma_sser1)) { | |
51533b61 MS |
530 | crisv32_free_dma(SYNC_SER1_TX_DMA_NBR); |
531 | free_irq(DMA6_INTR_VECT, &ports[1]); | |
532 | free_irq(DMA7_INTR_VECT, &ports[1]); | |
533 | printk(KERN_CRIT "Can't allocate sync serial port 3 RX DMA channel"); | |
0c401df3 | 534 | goto out; |
51533b61 MS |
535 | } |
536 | #endif | |
537 | } | |
e908dfc3 | 538 | #endif |
51533b61 MS |
539 | /* Enable DMAs */ |
540 | REG_WR(dma, port->regi_dmain, rw_cfg, cfg); | |
541 | REG_WR(dma, port->regi_dmaout, rw_cfg, cfg); | |
542 | /* Enable DMA IRQs */ | |
543 | REG_WR(dma, port->regi_dmain, rw_intr_mask, intr_mask); | |
544 | REG_WR(dma, port->regi_dmaout, rw_intr_mask, intr_mask); | |
e908dfc3 | 545 | /* Set up wordsize = 1 for DMAs. */ |
51533b61 MS |
546 | DMA_WR_CMD (port->regi_dmain, regk_dma_set_w_size1); |
547 | DMA_WR_CMD (port->regi_dmaout, regk_dma_set_w_size1); | |
548 | ||
549 | start_dma_in(port); | |
550 | port->init_irqs = 0; | |
551 | } else { /* !port->use_dma */ | |
552 | #ifdef SYNC_SER_MANUAL | |
553 | if (port == &ports[0]) { | |
e908dfc3 | 554 | if (request_irq(SYNCSER_INTR_VECT, |
51533b61 MS |
555 | manual_interrupt, |
556 | 0, | |
557 | "synchronous serial manual irq", | |
558 | &ports[0])) { | |
559 | printk("Can't allocate sync serial manual irq"); | |
0c401df3 | 560 | goto out; |
51533b61 | 561 | } |
e908dfc3 JN |
562 | } |
563 | #ifdef CONFIG_ETRAXFS | |
564 | else if (port == &ports[1]) { | |
51533b61 MS |
565 | if (request_irq(SSER1_INTR_VECT, |
566 | manual_interrupt, | |
567 | 0, | |
568 | "synchronous serial manual irq", | |
569 | &ports[1])) { | |
570 | printk(KERN_CRIT "Can't allocate sync serial manual irq"); | |
0c401df3 | 571 | goto out; |
51533b61 MS |
572 | } |
573 | } | |
e908dfc3 | 574 | #endif |
51533b61 MS |
575 | port->init_irqs = 0; |
576 | #else | |
577 | panic("sync_serial: Manual mode not supported.\n"); | |
578 | #endif /* SYNC_SER_MANUAL */ | |
579 | } | |
e908dfc3 | 580 | |
51533b61 MS |
581 | } /* port->init_irqs */ |
582 | ||
583 | port->busy++; | |
0c401df3 JC |
584 | ret = 0; |
585 | out: | |
586 | unlock_kernel(); | |
587 | return ret; | |
51533b61 MS |
588 | } |
589 | ||
590 | static int sync_serial_release(struct inode *inode, struct file *file) | |
591 | { | |
32ea086b | 592 | int dev = iminor(inode); |
e908dfc3 | 593 | sync_port *port; |
51533b61 | 594 | |
e908dfc3 | 595 | if (dev < 0 || dev >= NBR_PORTS || !ports[dev].enabled) |
51533b61 MS |
596 | { |
597 | DEBUG(printk("Invalid minor %d\n", dev)); | |
598 | return -ENODEV; | |
599 | } | |
600 | port = &ports[dev]; | |
601 | if (port->busy) | |
602 | port->busy--; | |
603 | if (!port->busy) | |
604 | /* XXX */ ; | |
605 | return 0; | |
606 | } | |
607 | ||
608 | static unsigned int sync_serial_poll(struct file *file, poll_table *wait) | |
609 | { | |
d817be9c | 610 | int dev = iminor(file->f_path.dentry->d_inode); |
51533b61 | 611 | unsigned int mask = 0; |
e908dfc3 | 612 | sync_port *port; |
51533b61 MS |
613 | DEBUGPOLL( static unsigned int prev_mask = 0; ); |
614 | ||
615 | port = &ports[dev]; | |
e908dfc3 JN |
616 | |
617 | if (!port->started) { | |
618 | reg_sser_rw_cfg cfg = REG_RD(sser, port->regi_sser, rw_cfg); | |
619 | reg_sser_rw_rec_cfg rec_cfg = | |
620 | REG_RD(sser, port->regi_sser, rw_rec_cfg); | |
621 | cfg.en = regk_sser_yes; | |
622 | rec_cfg.rec_en = port->input; | |
623 | REG_WR(sser, port->regi_sser, rw_cfg, cfg); | |
624 | REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg); | |
625 | port->started = 1; | |
626 | } | |
627 | ||
51533b61 MS |
628 | poll_wait(file, &port->out_wait_q, wait); |
629 | poll_wait(file, &port->in_wait_q, wait); | |
e908dfc3 JN |
630 | |
631 | /* No active transfer, descriptors are available */ | |
632 | if (port->output && !port->tr_running) | |
633 | mask |= POLLOUT | POLLWRNORM; | |
634 | ||
635 | /* Descriptor and buffer space available. */ | |
636 | if (port->output && | |
637 | port->active_tr_descr != port->catch_tr_descr && | |
638 | port->out_buf_count < OUT_BUFFER_SIZE) | |
51533b61 | 639 | mask |= POLLOUT | POLLWRNORM; |
e908dfc3 | 640 | |
51533b61 | 641 | /* At least an inbufchunk of data */ |
e908dfc3 | 642 | if (port->input && sync_data_avail(port) >= port->inbufchunk) |
51533b61 MS |
643 | mask |= POLLIN | POLLRDNORM; |
644 | ||
645 | DEBUGPOLL(if (mask != prev_mask) | |
646 | printk("sync_serial_poll: mask 0x%08X %s %s\n", mask, | |
647 | mask&POLLOUT?"POLLOUT":"", mask&POLLIN?"POLLIN":""); | |
648 | prev_mask = mask; | |
649 | ); | |
650 | return mask; | |
651 | } | |
652 | ||
653 | static int sync_serial_ioctl(struct inode *inode, struct file *file, | |
654 | unsigned int cmd, unsigned long arg) | |
655 | { | |
656 | int return_val = 0; | |
e908dfc3 | 657 | int dma_w_size = regk_dma_set_w_size1; |
d817be9c | 658 | int dev = iminor(file->f_path.dentry->d_inode); |
e908dfc3 | 659 | sync_port *port; |
51533b61 MS |
660 | reg_sser_rw_tr_cfg tr_cfg; |
661 | reg_sser_rw_rec_cfg rec_cfg; | |
662 | reg_sser_rw_frm_cfg frm_cfg; | |
663 | reg_sser_rw_cfg gen_cfg; | |
664 | reg_sser_rw_intr_mask intr_mask; | |
665 | ||
e908dfc3 | 666 | if (dev < 0 || dev >= NBR_PORTS || !ports[dev].enabled) |
51533b61 MS |
667 | { |
668 | DEBUG(printk("Invalid minor %d\n", dev)); | |
669 | return -1; | |
670 | } | |
671 | port = &ports[dev]; | |
672 | spin_lock_irq(&port->lock); | |
673 | ||
674 | tr_cfg = REG_RD(sser, port->regi_sser, rw_tr_cfg); | |
675 | rec_cfg = REG_RD(sser, port->regi_sser, rw_rec_cfg); | |
676 | frm_cfg = REG_RD(sser, port->regi_sser, rw_frm_cfg); | |
677 | gen_cfg = REG_RD(sser, port->regi_sser, rw_cfg); | |
678 | intr_mask = REG_RD(sser, port->regi_sser, rw_intr_mask); | |
679 | ||
680 | switch(cmd) | |
681 | { | |
682 | case SSP_SPEED: | |
683 | if (GET_SPEED(arg) == CODEC) | |
684 | { | |
e908dfc3 JN |
685 | unsigned int freq; |
686 | ||
51533b61 | 687 | gen_cfg.base_freq = regk_sser_f32; |
e908dfc3 JN |
688 | |
689 | /* Clock divider will internally be | |
690 | * gen_cfg.clk_div + 1. | |
691 | */ | |
692 | ||
693 | freq = GET_FREQ(arg); | |
694 | switch (freq) { | |
695 | case FREQ_32kHz: | |
696 | case FREQ_64kHz: | |
697 | case FREQ_128kHz: | |
698 | case FREQ_256kHz: | |
699 | gen_cfg.clk_div = 125 * | |
700 | (1 << (freq - FREQ_256kHz)) - 1; | |
701 | break; | |
702 | case FREQ_512kHz: | |
703 | gen_cfg.clk_div = 62; | |
704 | break; | |
705 | case FREQ_1MHz: | |
706 | case FREQ_2MHz: | |
707 | case FREQ_4MHz: | |
708 | gen_cfg.clk_div = 8 * (1 << freq) - 1; | |
709 | break; | |
710 | } | |
711 | } else { | |
51533b61 | 712 | gen_cfg.base_freq = regk_sser_f29_493; |
e908dfc3 JN |
713 | switch (GET_SPEED(arg)) { |
714 | case SSP150: | |
715 | gen_cfg.clk_div = 29493000 / (150 * 8) - 1; | |
716 | break; | |
717 | case SSP300: | |
718 | gen_cfg.clk_div = 29493000 / (300 * 8) - 1; | |
719 | break; | |
720 | case SSP600: | |
721 | gen_cfg.clk_div = 29493000 / (600 * 8) - 1; | |
722 | break; | |
723 | case SSP1200: | |
724 | gen_cfg.clk_div = 29493000 / (1200 * 8) - 1; | |
725 | break; | |
726 | case SSP2400: | |
727 | gen_cfg.clk_div = 29493000 / (2400 * 8) - 1; | |
728 | break; | |
729 | case SSP4800: | |
730 | gen_cfg.clk_div = 29493000 / (4800 * 8) - 1; | |
731 | break; | |
732 | case SSP9600: | |
733 | gen_cfg.clk_div = 29493000 / (9600 * 8) - 1; | |
734 | break; | |
735 | case SSP19200: | |
736 | gen_cfg.clk_div = 29493000 / (19200 * 8) - 1; | |
737 | break; | |
738 | case SSP28800: | |
739 | gen_cfg.clk_div = 29493000 / (28800 * 8) - 1; | |
740 | break; | |
741 | case SSP57600: | |
742 | gen_cfg.clk_div = 29493000 / (57600 * 8) - 1; | |
743 | break; | |
744 | case SSP115200: | |
745 | gen_cfg.clk_div = 29493000 / (115200 * 8) - 1; | |
746 | break; | |
747 | case SSP230400: | |
748 | gen_cfg.clk_div = 29493000 / (230400 * 8) - 1; | |
749 | break; | |
750 | case SSP460800: | |
751 | gen_cfg.clk_div = 29493000 / (460800 * 8) - 1; | |
752 | break; | |
753 | case SSP921600: | |
754 | gen_cfg.clk_div = 29493000 / (921600 * 8) - 1; | |
755 | break; | |
756 | case SSP3125000: | |
757 | gen_cfg.base_freq = regk_sser_f100; | |
758 | gen_cfg.clk_div = 100000000 / (3125000 * 8) - 1; | |
759 | break; | |
51533b61 MS |
760 | |
761 | } | |
762 | } | |
763 | frm_cfg.wordrate = GET_WORD_RATE(arg); | |
764 | ||
765 | break; | |
766 | case SSP_MODE: | |
767 | switch(arg) | |
768 | { | |
769 | case MASTER_OUTPUT: | |
770 | port->output = 1; | |
771 | port->input = 0; | |
e908dfc3 JN |
772 | frm_cfg.out_on = regk_sser_tr; |
773 | frm_cfg.frame_pin_dir = regk_sser_out; | |
51533b61 MS |
774 | gen_cfg.clk_dir = regk_sser_out; |
775 | break; | |
776 | case SLAVE_OUTPUT: | |
777 | port->output = 1; | |
778 | port->input = 0; | |
e908dfc3 | 779 | frm_cfg.frame_pin_dir = regk_sser_in; |
51533b61 MS |
780 | gen_cfg.clk_dir = regk_sser_in; |
781 | break; | |
782 | case MASTER_INPUT: | |
783 | port->output = 0; | |
784 | port->input = 1; | |
e908dfc3 JN |
785 | frm_cfg.frame_pin_dir = regk_sser_out; |
786 | frm_cfg.out_on = regk_sser_intern_tb; | |
51533b61 MS |
787 | gen_cfg.clk_dir = regk_sser_out; |
788 | break; | |
789 | case SLAVE_INPUT: | |
790 | port->output = 0; | |
791 | port->input = 1; | |
e908dfc3 | 792 | frm_cfg.frame_pin_dir = regk_sser_in; |
51533b61 MS |
793 | gen_cfg.clk_dir = regk_sser_in; |
794 | break; | |
795 | case MASTER_BIDIR: | |
796 | port->output = 1; | |
797 | port->input = 1; | |
e908dfc3 JN |
798 | frm_cfg.frame_pin_dir = regk_sser_out; |
799 | frm_cfg.out_on = regk_sser_intern_tb; | |
51533b61 MS |
800 | gen_cfg.clk_dir = regk_sser_out; |
801 | break; | |
802 | case SLAVE_BIDIR: | |
803 | port->output = 1; | |
804 | port->input = 1; | |
e908dfc3 | 805 | frm_cfg.frame_pin_dir = regk_sser_in; |
51533b61 MS |
806 | gen_cfg.clk_dir = regk_sser_in; |
807 | break; | |
808 | default: | |
809 | spin_unlock_irq(&port->lock); | |
810 | return -EINVAL; | |
51533b61 MS |
811 | } |
812 | if (!port->use_dma || (arg == MASTER_OUTPUT || arg == SLAVE_OUTPUT)) | |
813 | intr_mask.rdav = regk_sser_yes; | |
814 | break; | |
815 | case SSP_FRAME_SYNC: | |
e908dfc3 JN |
816 | if (arg & NORMAL_SYNC) { |
817 | frm_cfg.rec_delay = 1; | |
51533b61 | 818 | frm_cfg.tr_delay = 1; |
e908dfc3 | 819 | } |
51533b61 | 820 | else if (arg & EARLY_SYNC) |
e908dfc3 JN |
821 | frm_cfg.rec_delay = frm_cfg.tr_delay = 0; |
822 | else if (arg & SECOND_WORD_SYNC) { | |
823 | frm_cfg.rec_delay = 7; | |
824 | frm_cfg.tr_delay = 1; | |
825 | } | |
51533b61 MS |
826 | |
827 | tr_cfg.bulk_wspace = frm_cfg.tr_delay; | |
828 | frm_cfg.early_wend = regk_sser_yes; | |
829 | if (arg & BIT_SYNC) | |
830 | frm_cfg.type = regk_sser_edge; | |
831 | else if (arg & WORD_SYNC) | |
832 | frm_cfg.type = regk_sser_level; | |
833 | else if (arg & EXTENDED_SYNC) | |
834 | frm_cfg.early_wend = regk_sser_no; | |
835 | ||
836 | if (arg & SYNC_ON) | |
837 | frm_cfg.frame_pin_use = regk_sser_frm; | |
838 | else if (arg & SYNC_OFF) | |
839 | frm_cfg.frame_pin_use = regk_sser_gio0; | |
840 | ||
e908dfc3 JN |
841 | dma_w_size = regk_dma_set_w_size2; |
842 | if (arg & WORD_SIZE_8) { | |
51533b61 | 843 | rec_cfg.sample_size = tr_cfg.sample_size = 7; |
e908dfc3 JN |
844 | dma_w_size = regk_dma_set_w_size1; |
845 | } else if (arg & WORD_SIZE_12) | |
51533b61 MS |
846 | rec_cfg.sample_size = tr_cfg.sample_size = 11; |
847 | else if (arg & WORD_SIZE_16) | |
848 | rec_cfg.sample_size = tr_cfg.sample_size = 15; | |
849 | else if (arg & WORD_SIZE_24) | |
850 | rec_cfg.sample_size = tr_cfg.sample_size = 23; | |
851 | else if (arg & WORD_SIZE_32) | |
852 | rec_cfg.sample_size = tr_cfg.sample_size = 31; | |
853 | ||
854 | if (arg & BIT_ORDER_MSB) | |
855 | rec_cfg.sh_dir = tr_cfg.sh_dir = regk_sser_msbfirst; | |
856 | else if (arg & BIT_ORDER_LSB) | |
857 | rec_cfg.sh_dir = tr_cfg.sh_dir = regk_sser_lsbfirst; | |
858 | ||
e908dfc3 JN |
859 | if (arg & FLOW_CONTROL_ENABLE) { |
860 | frm_cfg.status_pin_use = regk_sser_frm; | |
51533b61 | 861 | rec_cfg.fifo_thr = regk_sser_thr16; |
e908dfc3 JN |
862 | } else if (arg & FLOW_CONTROL_DISABLE) { |
863 | frm_cfg.status_pin_use = regk_sser_gio0; | |
51533b61 | 864 | rec_cfg.fifo_thr = regk_sser_inf; |
e908dfc3 | 865 | } |
51533b61 MS |
866 | |
867 | if (arg & CLOCK_NOT_GATED) | |
868 | gen_cfg.gate_clk = regk_sser_no; | |
869 | else if (arg & CLOCK_GATED) | |
870 | gen_cfg.gate_clk = regk_sser_yes; | |
871 | ||
872 | break; | |
873 | case SSP_IPOLARITY: | |
874 | /* NOTE!! negedge is considered NORMAL */ | |
875 | if (arg & CLOCK_NORMAL) | |
876 | rec_cfg.clk_pol = regk_sser_neg; | |
877 | else if (arg & CLOCK_INVERT) | |
878 | rec_cfg.clk_pol = regk_sser_pos; | |
879 | ||
880 | if (arg & FRAME_NORMAL) | |
881 | frm_cfg.level = regk_sser_pos_hi; | |
882 | else if (arg & FRAME_INVERT) | |
883 | frm_cfg.level = regk_sser_neg_lo; | |
884 | ||
885 | if (arg & STATUS_NORMAL) | |
886 | gen_cfg.hold_pol = regk_sser_pos; | |
887 | else if (arg & STATUS_INVERT) | |
888 | gen_cfg.hold_pol = regk_sser_neg; | |
889 | break; | |
890 | case SSP_OPOLARITY: | |
891 | if (arg & CLOCK_NORMAL) | |
51533b61 | 892 | gen_cfg.out_clk_pol = regk_sser_pos; |
e908dfc3 JN |
893 | else if (arg & CLOCK_INVERT) |
894 | gen_cfg.out_clk_pol = regk_sser_neg; | |
51533b61 MS |
895 | |
896 | if (arg & FRAME_NORMAL) | |
897 | frm_cfg.level = regk_sser_pos_hi; | |
898 | else if (arg & FRAME_INVERT) | |
899 | frm_cfg.level = regk_sser_neg_lo; | |
900 | ||
901 | if (arg & STATUS_NORMAL) | |
902 | gen_cfg.hold_pol = regk_sser_pos; | |
903 | else if (arg & STATUS_INVERT) | |
904 | gen_cfg.hold_pol = regk_sser_neg; | |
905 | break; | |
906 | case SSP_SPI: | |
907 | rec_cfg.fifo_thr = regk_sser_inf; | |
908 | rec_cfg.sh_dir = tr_cfg.sh_dir = regk_sser_msbfirst; | |
909 | rec_cfg.sample_size = tr_cfg.sample_size = 7; | |
910 | frm_cfg.frame_pin_use = regk_sser_frm; | |
911 | frm_cfg.type = regk_sser_level; | |
912 | frm_cfg.tr_delay = 1; | |
913 | frm_cfg.level = regk_sser_neg_lo; | |
914 | if (arg & SPI_SLAVE) | |
915 | { | |
916 | rec_cfg.clk_pol = regk_sser_neg; | |
917 | gen_cfg.clk_dir = regk_sser_in; | |
918 | port->input = 1; | |
919 | port->output = 0; | |
920 | } | |
921 | else | |
922 | { | |
923 | gen_cfg.out_clk_pol = regk_sser_pos; | |
924 | port->input = 0; | |
925 | port->output = 1; | |
926 | gen_cfg.clk_dir = regk_sser_out; | |
927 | } | |
928 | break; | |
929 | case SSP_INBUFCHUNK: | |
930 | break; | |
931 | default: | |
932 | return_val = -1; | |
933 | } | |
934 | ||
935 | ||
e908dfc3 | 936 | if (port->started) { |
51533b61 | 937 | rec_cfg.rec_en = port->input; |
e908dfc3 | 938 | gen_cfg.en = (port->output | port->input); |
51533b61 MS |
939 | } |
940 | ||
941 | REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg); | |
942 | REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg); | |
943 | REG_WR(sser, port->regi_sser, rw_frm_cfg, frm_cfg); | |
944 | REG_WR(sser, port->regi_sser, rw_intr_mask, intr_mask); | |
945 | REG_WR(sser, port->regi_sser, rw_cfg, gen_cfg); | |
946 | ||
e908dfc3 JN |
947 | |
948 | if (cmd == SSP_FRAME_SYNC && (arg & (WORD_SIZE_8 | WORD_SIZE_12 | | |
949 | WORD_SIZE_16 | WORD_SIZE_24 | WORD_SIZE_32))) { | |
950 | int en = gen_cfg.en; | |
951 | gen_cfg.en = 0; | |
952 | REG_WR(sser, port->regi_sser, rw_cfg, gen_cfg); | |
953 | /* ##### Should DMA be stoped before we change dma size? */ | |
954 | DMA_WR_CMD(port->regi_dmain, dma_w_size); | |
955 | DMA_WR_CMD(port->regi_dmaout, dma_w_size); | |
956 | gen_cfg.en = en; | |
957 | REG_WR(sser, port->regi_sser, rw_cfg, gen_cfg); | |
958 | } | |
959 | ||
51533b61 MS |
960 | spin_unlock_irq(&port->lock); |
961 | return return_val; | |
962 | } | |
963 | ||
e908dfc3 JN |
964 | /* NOTE: sync_serial_write does not support concurrency */ |
965 | static ssize_t sync_serial_write(struct file *file, const char *buf, | |
966 | size_t count, loff_t *ppos) | |
51533b61 | 967 | { |
d817be9c | 968 | int dev = iminor(file->f_path.dentry->d_inode); |
51533b61 | 969 | DECLARE_WAITQUEUE(wait, current); |
e908dfc3 JN |
970 | struct sync_port *port; |
971 | int trunc_count; | |
51533b61 | 972 | unsigned long flags; |
e908dfc3 JN |
973 | int bytes_free; |
974 | int out_buf_count; | |
51533b61 | 975 | |
e908dfc3 JN |
976 | unsigned char *rd_ptr; /* First allocated byte in the buffer */ |
977 | unsigned char *wr_ptr; /* First free byte in the buffer */ | |
978 | unsigned char *buf_stop_ptr; /* Last byte + 1 */ | |
979 | ||
980 | if (dev < 0 || dev >= NBR_PORTS || !ports[dev].enabled) { | |
51533b61 MS |
981 | DEBUG(printk("Invalid minor %d\n", dev)); |
982 | return -ENODEV; | |
983 | } | |
984 | port = &ports[dev]; | |
985 | ||
e908dfc3 JN |
986 | /* |<- OUT_BUFFER_SIZE ->| |
987 | * |<- out_buf_count ->| | |
988 | * |<- trunc_count ->| ...->| | |
989 | * ______________________________________________________ | |
990 | * | free | data | free | | |
991 | * |_________|___________________|________________________| | |
992 | * ^ rd_ptr ^ wr_ptr | |
51533b61 | 993 | */ |
e908dfc3 JN |
994 | DEBUGWRITE(printk(KERN_DEBUG "W d%d c %lu a: %p c: %p\n", |
995 | port->port_nbr, count, port->active_tr_descr, | |
996 | port->catch_tr_descr)); | |
51533b61 MS |
997 | |
998 | /* Read variables that may be updated by interrupts */ | |
999 | spin_lock_irqsave(&port->lock, flags); | |
e908dfc3 JN |
1000 | rd_ptr = port->out_rd_ptr; |
1001 | out_buf_count = port->out_buf_count; | |
51533b61 | 1002 | spin_unlock_irqrestore(&port->lock, flags); |
51533b61 | 1003 | |
e908dfc3 JN |
1004 | /* Check if resources are available */ |
1005 | if (port->tr_running && | |
1006 | ((port->use_dma && port->active_tr_descr == port->catch_tr_descr) || | |
1007 | out_buf_count >= OUT_BUFFER_SIZE)) { | |
1008 | DEBUGWRITE(printk(KERN_DEBUG "sser%d full\n", dev)); | |
1009 | return -EAGAIN; | |
1010 | } | |
1011 | ||
1012 | buf_stop_ptr = port->out_buffer + OUT_BUFFER_SIZE; | |
1013 | ||
1014 | /* Determine pointer to the first free byte, before copying. */ | |
1015 | wr_ptr = rd_ptr + out_buf_count; | |
1016 | if (wr_ptr >= buf_stop_ptr) | |
1017 | wr_ptr -= OUT_BUFFER_SIZE; | |
1018 | ||
1019 | /* If we wrap the ring buffer, let the user space program handle it by | |
1020 | * truncating the data. This could be more elegant, small buffer | |
1021 | * fragments may occur. | |
1022 | */ | |
1023 | bytes_free = OUT_BUFFER_SIZE - out_buf_count; | |
1024 | if (wr_ptr + bytes_free > buf_stop_ptr) | |
1025 | bytes_free = buf_stop_ptr - wr_ptr; | |
1026 | trunc_count = (count < bytes_free) ? count : bytes_free; | |
51533b61 | 1027 | |
e908dfc3 | 1028 | if (copy_from_user(wr_ptr, buf, trunc_count)) |
51533b61 MS |
1029 | return -EFAULT; |
1030 | ||
e908dfc3 JN |
1031 | DEBUGOUTBUF(printk(KERN_DEBUG "%-4d + %-4d = %-4d %p %p %p\n", |
1032 | out_buf_count, trunc_count, | |
1033 | port->out_buf_count, port->out_buffer, | |
1034 | wr_ptr, buf_stop_ptr)); | |
51533b61 MS |
1035 | |
1036 | /* Make sure transmitter/receiver is running */ | |
e908dfc3 | 1037 | if (!port->started) { |
51533b61 | 1038 | reg_sser_rw_cfg cfg = REG_RD(sser, port->regi_sser, rw_cfg); |
51533b61 MS |
1039 | reg_sser_rw_rec_cfg rec_cfg = REG_RD(sser, port->regi_sser, rw_rec_cfg); |
1040 | cfg.en = regk_sser_yes; | |
51533b61 MS |
1041 | rec_cfg.rec_en = port->input; |
1042 | REG_WR(sser, port->regi_sser, rw_cfg, cfg); | |
51533b61 MS |
1043 | REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg); |
1044 | port->started = 1; | |
1045 | } | |
1046 | ||
e908dfc3 JN |
1047 | /* Setup wait if blocking */ |
1048 | if (!(file->f_flags & O_NONBLOCK)) { | |
1049 | add_wait_queue(&port->out_wait_q, &wait); | |
1050 | set_current_state(TASK_INTERRUPTIBLE); | |
51533b61 MS |
1051 | } |
1052 | ||
51533b61 | 1053 | spin_lock_irqsave(&port->lock, flags); |
e908dfc3 JN |
1054 | port->out_buf_count += trunc_count; |
1055 | if (port->use_dma) { | |
1056 | start_dma_out(port, wr_ptr, trunc_count); | |
1057 | } else if (!port->tr_running) { | |
1058 | reg_sser_rw_intr_mask intr_mask; | |
1059 | intr_mask = REG_RD(sser, port->regi_sser, rw_intr_mask); | |
1060 | /* Start sender by writing data */ | |
1061 | send_word(port); | |
1062 | /* and enable transmitter ready IRQ */ | |
1063 | intr_mask.trdy = 1; | |
1064 | REG_WR(sser, port->regi_sser, rw_intr_mask, intr_mask); | |
51533b61 MS |
1065 | } |
1066 | spin_unlock_irqrestore(&port->lock, flags); | |
e908dfc3 JN |
1067 | |
1068 | /* Exit if non blocking */ | |
1069 | if (file->f_flags & O_NONBLOCK) { | |
1070 | DEBUGWRITE(printk(KERN_DEBUG "w d%d c %lu %08x\n", | |
1071 | port->port_nbr, trunc_count, | |
1072 | REG_RD_INT(dma, port->regi_dmaout, r_intr))); | |
1073 | return trunc_count; | |
1074 | } | |
1075 | ||
51533b61 MS |
1076 | schedule(); |
1077 | set_current_state(TASK_RUNNING); | |
1078 | remove_wait_queue(&port->out_wait_q, &wait); | |
e908dfc3 | 1079 | |
51533b61 | 1080 | if (signal_pending(current)) |
51533b61 | 1081 | return -EINTR; |
cbca6634 | 1082 | |
e908dfc3 JN |
1083 | DEBUGWRITE(printk(KERN_DEBUG "w d%d c %lu\n", |
1084 | port->port_nbr, trunc_count)); | |
1085 | return trunc_count; | |
51533b61 MS |
1086 | } |
1087 | ||
1088 | static ssize_t sync_serial_read(struct file * file, char * buf, | |
1089 | size_t count, loff_t *ppos) | |
1090 | { | |
d817be9c | 1091 | int dev = iminor(file->f_path.dentry->d_inode); |
51533b61 MS |
1092 | int avail; |
1093 | sync_port *port; | |
1094 | unsigned char* start; | |
1095 | unsigned char* end; | |
1096 | unsigned long flags; | |
1097 | ||
e908dfc3 | 1098 | if (dev < 0 || dev >= NBR_PORTS || !ports[dev].enabled) |
51533b61 MS |
1099 | { |
1100 | DEBUG(printk("Invalid minor %d\n", dev)); | |
1101 | return -ENODEV; | |
1102 | } | |
1103 | port = &ports[dev]; | |
1104 | ||
1105 | DEBUGREAD(printk("R%d c %d ri %lu wi %lu /%lu\n", dev, count, port->readp - port->flip, port->writep - port->flip, port->in_buffer_size)); | |
1106 | ||
1107 | if (!port->started) | |
1108 | { | |
1109 | reg_sser_rw_cfg cfg = REG_RD(sser, port->regi_sser, rw_cfg); | |
1110 | reg_sser_rw_tr_cfg tr_cfg = REG_RD(sser, port->regi_sser, rw_tr_cfg); | |
1111 | reg_sser_rw_rec_cfg rec_cfg = REG_RD(sser, port->regi_sser, rw_rec_cfg); | |
1112 | cfg.en = regk_sser_yes; | |
1113 | tr_cfg.tr_en = regk_sser_yes; | |
1114 | rec_cfg.rec_en = regk_sser_yes; | |
1115 | REG_WR(sser, port->regi_sser, rw_cfg, cfg); | |
1116 | REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg); | |
1117 | REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg); | |
1118 | port->started = 1; | |
1119 | } | |
1120 | ||
51533b61 MS |
1121 | /* Calculate number of available bytes */ |
1122 | /* Save pointers to avoid that they are modified by interrupt */ | |
1123 | spin_lock_irqsave(&port->lock, flags); | |
1124 | start = (unsigned char*)port->readp; /* cast away volatile */ | |
1125 | end = (unsigned char*)port->writep; /* cast away volatile */ | |
1126 | spin_unlock_irqrestore(&port->lock, flags); | |
1127 | while ((start == end) && !port->full) /* No data */ | |
1128 | { | |
e908dfc3 | 1129 | DEBUGREAD(printk(KERN_DEBUG "&")); |
51533b61 | 1130 | if (file->f_flags & O_NONBLOCK) |
51533b61 | 1131 | return -EAGAIN; |
51533b61 MS |
1132 | |
1133 | interruptible_sleep_on(&port->in_wait_q); | |
1134 | if (signal_pending(current)) | |
51533b61 | 1135 | return -EINTR; |
e908dfc3 | 1136 | |
51533b61 MS |
1137 | spin_lock_irqsave(&port->lock, flags); |
1138 | start = (unsigned char*)port->readp; /* cast away volatile */ | |
1139 | end = (unsigned char*)port->writep; /* cast away volatile */ | |
1140 | spin_unlock_irqrestore(&port->lock, flags); | |
1141 | } | |
1142 | ||
1143 | /* Lazy read, never return wrapped data. */ | |
1144 | if (port->full) | |
1145 | avail = port->in_buffer_size; | |
1146 | else if (end > start) | |
1147 | avail = end - start; | |
1148 | else | |
1149 | avail = port->flip + port->in_buffer_size - start; | |
1150 | ||
1151 | count = count > avail ? avail : count; | |
1152 | if (copy_to_user(buf, start, count)) | |
1153 | return -EFAULT; | |
1154 | /* Disable interrupts while updating readp */ | |
1155 | spin_lock_irqsave(&port->lock, flags); | |
1156 | port->readp += count; | |
1157 | if (port->readp >= port->flip + port->in_buffer_size) /* Wrap? */ | |
1158 | port->readp = port->flip; | |
1159 | port->full = 0; | |
1160 | spin_unlock_irqrestore(&port->lock, flags); | |
1161 | DEBUGREAD(printk("r %d\n", count)); | |
1162 | return count; | |
1163 | } | |
1164 | ||
1165 | static void send_word(sync_port* port) | |
1166 | { | |
1167 | reg_sser_rw_tr_cfg tr_cfg = REG_RD(sser, port->regi_sser, rw_tr_cfg); | |
1168 | reg_sser_rw_tr_data tr_data = {0}; | |
1169 | ||
1170 | switch(tr_cfg.sample_size) | |
1171 | { | |
1172 | case 8: | |
e908dfc3 JN |
1173 | port->out_buf_count--; |
1174 | tr_data.data = *port->out_rd_ptr++; | |
51533b61 | 1175 | REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); |
e908dfc3 JN |
1176 | if (port->out_rd_ptr >= port->out_buffer + OUT_BUFFER_SIZE) |
1177 | port->out_rd_ptr = port->out_buffer; | |
51533b61 MS |
1178 | break; |
1179 | case 12: | |
1180 | { | |
e908dfc3 JN |
1181 | int data = (*port->out_rd_ptr++) << 8; |
1182 | data |= *port->out_rd_ptr++; | |
1183 | port->out_buf_count -= 2; | |
51533b61 MS |
1184 | tr_data.data = data; |
1185 | REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); | |
e908dfc3 JN |
1186 | if (port->out_rd_ptr >= port->out_buffer + OUT_BUFFER_SIZE) |
1187 | port->out_rd_ptr = port->out_buffer; | |
51533b61 MS |
1188 | } |
1189 | break; | |
1190 | case 16: | |
e908dfc3 JN |
1191 | port->out_buf_count -= 2; |
1192 | tr_data.data = *(unsigned short *)port->out_rd_ptr; | |
51533b61 | 1193 | REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); |
e908dfc3 JN |
1194 | port->out_rd_ptr += 2; |
1195 | if (port->out_rd_ptr >= port->out_buffer + OUT_BUFFER_SIZE) | |
1196 | port->out_rd_ptr = port->out_buffer; | |
51533b61 MS |
1197 | break; |
1198 | case 24: | |
e908dfc3 JN |
1199 | port->out_buf_count -= 3; |
1200 | tr_data.data = *(unsigned short *)port->out_rd_ptr; | |
51533b61 | 1201 | REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); |
e908dfc3 JN |
1202 | port->out_rd_ptr += 2; |
1203 | tr_data.data = *port->out_rd_ptr++; | |
51533b61 | 1204 | REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); |
e908dfc3 JN |
1205 | if (port->out_rd_ptr >= port->out_buffer + OUT_BUFFER_SIZE) |
1206 | port->out_rd_ptr = port->out_buffer; | |
51533b61 MS |
1207 | break; |
1208 | case 32: | |
e908dfc3 JN |
1209 | port->out_buf_count -= 4; |
1210 | tr_data.data = *(unsigned short *)port->out_rd_ptr; | |
51533b61 | 1211 | REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); |
e908dfc3 JN |
1212 | port->out_rd_ptr += 2; |
1213 | tr_data.data = *(unsigned short *)port->out_rd_ptr; | |
51533b61 | 1214 | REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); |
e908dfc3 JN |
1215 | port->out_rd_ptr += 2; |
1216 | if (port->out_rd_ptr >= port->out_buffer + OUT_BUFFER_SIZE) | |
1217 | port->out_rd_ptr = port->out_buffer; | |
51533b61 MS |
1218 | break; |
1219 | } | |
1220 | } | |
1221 | ||
e908dfc3 JN |
1222 | static void start_dma_out(struct sync_port *port, |
1223 | const char *data, int count) | |
51533b61 | 1224 | { |
e908dfc3 JN |
1225 | port->active_tr_descr->buf = (char *) virt_to_phys((char *) data); |
1226 | port->active_tr_descr->after = port->active_tr_descr->buf + count; | |
1227 | port->active_tr_descr->intr = 1; | |
1228 | ||
1229 | port->active_tr_descr->eol = 1; | |
1230 | port->prev_tr_descr->eol = 0; | |
1231 | ||
1232 | DEBUGTRDMA(printk(KERN_DEBUG "Inserting eolr:%p eol@:%p\n", | |
1233 | port->prev_tr_descr, port->active_tr_descr)); | |
1234 | port->prev_tr_descr = port->active_tr_descr; | |
1235 | port->active_tr_descr = phys_to_virt((int) port->active_tr_descr->next); | |
1236 | ||
1237 | if (!port->tr_running) { | |
1238 | reg_sser_rw_tr_cfg tr_cfg = REG_RD(sser, port->regi_sser, | |
1239 | rw_tr_cfg); | |
51533b61 | 1240 | |
e908dfc3 JN |
1241 | port->out_context.next = 0; |
1242 | port->out_context.saved_data = | |
1243 | (dma_descr_data *)virt_to_phys(port->prev_tr_descr); | |
1244 | port->out_context.saved_data_buf = port->prev_tr_descr->buf; | |
1245 | ||
1246 | DMA_START_CONTEXT(port->regi_dmaout, | |
1247 | virt_to_phys((char *)&port->out_context)); | |
1248 | ||
1249 | tr_cfg.tr_en = regk_sser_yes; | |
1250 | REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg); | |
1251 | DEBUGTRDMA(printk(KERN_DEBUG "dma s\n");); | |
1252 | } else { | |
1253 | DMA_CONTINUE_DATA(port->regi_dmaout); | |
1254 | DEBUGTRDMA(printk(KERN_DEBUG "dma c\n");); | |
1255 | } | |
51533b61 | 1256 | |
e908dfc3 | 1257 | port->tr_running = 1; |
51533b61 MS |
1258 | } |
1259 | ||
e908dfc3 | 1260 | static void start_dma_in(sync_port *port) |
51533b61 MS |
1261 | { |
1262 | int i; | |
e908dfc3 | 1263 | char *buf; |
51533b61 MS |
1264 | port->writep = port->flip; |
1265 | ||
e908dfc3 | 1266 | if (port->writep > port->flip + port->in_buffer_size) { |
51533b61 MS |
1267 | panic("Offset too large in sync serial driver\n"); |
1268 | return; | |
1269 | } | |
1270 | buf = (char*)virt_to_phys(port->in_buffer); | |
e908dfc3 | 1271 | for (i = 0; i < NBR_IN_DESCR; i++) { |
51533b61 MS |
1272 | port->in_descr[i].buf = buf; |
1273 | port->in_descr[i].after = buf + port->inbufchunk; | |
1274 | port->in_descr[i].intr = 1; | |
1275 | port->in_descr[i].next = (dma_descr_data*)virt_to_phys(&port->in_descr[i+1]); | |
1276 | port->in_descr[i].buf = buf; | |
1277 | buf += port->inbufchunk; | |
1278 | } | |
1279 | /* Link the last descriptor to the first */ | |
1280 | port->in_descr[i-1].next = (dma_descr_data*)virt_to_phys(&port->in_descr[0]); | |
1281 | port->in_descr[i-1].eol = regk_sser_yes; | |
1282 | port->next_rx_desc = &port->in_descr[0]; | |
e908dfc3 | 1283 | port->prev_rx_desc = &port->in_descr[NBR_IN_DESCR - 1]; |
51533b61 MS |
1284 | port->in_context.saved_data = (dma_descr_data*)virt_to_phys(&port->in_descr[0]); |
1285 | port->in_context.saved_data_buf = port->in_descr[0].buf; | |
1286 | DMA_START_CONTEXT(port->regi_dmain, virt_to_phys(&port->in_context)); | |
1287 | } | |
1288 | ||
1289 | #ifdef SYNC_SER_DMA | |
e908dfc3 | 1290 | static irqreturn_t tr_interrupt(int irq, void *dev_id) |
51533b61 MS |
1291 | { |
1292 | reg_dma_r_masked_intr masked; | |
1293 | reg_dma_rw_ack_intr ack_intr = {.data = regk_dma_yes}; | |
e908dfc3 | 1294 | reg_dma_rw_stat stat; |
51533b61 | 1295 | int i; |
51533b61 | 1296 | int found = 0; |
e908dfc3 | 1297 | int stop_sser = 0; |
51533b61 | 1298 | |
e908dfc3 | 1299 | for (i = 0; i < NBR_PORTS; i++) { |
51533b61 | 1300 | sync_port *port = &ports[i]; |
e908dfc3 | 1301 | if (!port->enabled || !port->use_dma) |
51533b61 MS |
1302 | continue; |
1303 | ||
e908dfc3 | 1304 | /* IRQ active for the port? */ |
51533b61 | 1305 | masked = REG_RD(dma, port->regi_dmaout, r_masked_intr); |
e908dfc3 JN |
1306 | if (!masked.data) |
1307 | continue; | |
51533b61 | 1308 | |
e908dfc3 JN |
1309 | found = 1; |
1310 | ||
1311 | /* Check if we should stop the DMA transfer */ | |
1312 | stat = REG_RD(dma, port->regi_dmaout, rw_stat); | |
1313 | if (stat.list_state == regk_dma_data_at_eol) | |
1314 | stop_sser = 1; | |
1315 | ||
1316 | /* Clear IRQ */ | |
1317 | REG_WR(dma, port->regi_dmaout, rw_ack_intr, ack_intr); | |
1318 | ||
1319 | if (!stop_sser) { | |
1320 | /* The DMA has completed a descriptor, EOL was not | |
1321 | * encountered, so step relevant descriptor and | |
1322 | * datapointers forward. */ | |
1323 | int sent; | |
1324 | sent = port->catch_tr_descr->after - | |
1325 | port->catch_tr_descr->buf; | |
1326 | DEBUGTXINT(printk(KERN_DEBUG "%-4d - %-4d = %-4d\t" | |
1327 | "in descr %p (ac: %p)\n", | |
1328 | port->out_buf_count, sent, | |
1329 | port->out_buf_count - sent, | |
1330 | port->catch_tr_descr, | |
1331 | port->active_tr_descr);); | |
1332 | port->out_buf_count -= sent; | |
1333 | port->catch_tr_descr = | |
1334 | phys_to_virt((int) port->catch_tr_descr->next); | |
1335 | port->out_rd_ptr = | |
1336 | phys_to_virt((int) port->catch_tr_descr->buf); | |
1337 | } else { | |
1338 | int i, sent; | |
1339 | /* EOL handler. | |
1340 | * Note that if an EOL was encountered during the irq | |
1341 | * locked section of sync_ser_write the DMA will be | |
1342 | * restarted and the eol flag will be cleared. | |
1343 | * The remaining descriptors will be traversed by | |
1344 | * the descriptor interrupts as usual. | |
1345 | */ | |
1346 | i = 0; | |
1347 | while (!port->catch_tr_descr->eol) { | |
1348 | sent = port->catch_tr_descr->after - | |
1349 | port->catch_tr_descr->buf; | |
1350 | DEBUGOUTBUF(printk(KERN_DEBUG | |
1351 | "traversing descr %p -%d (%d)\n", | |
1352 | port->catch_tr_descr, | |
1353 | sent, | |
1354 | port->out_buf_count)); | |
1355 | port->out_buf_count -= sent; | |
1356 | port->catch_tr_descr = phys_to_virt( | |
1357 | (int)port->catch_tr_descr->next); | |
1358 | i++; | |
1359 | if (i >= NBR_OUT_DESCR) { | |
1360 | /* TODO: Reset and recover */ | |
1361 | panic("sync_serial: missing eol"); | |
1362 | } | |
51533b61 | 1363 | } |
e908dfc3 JN |
1364 | sent = port->catch_tr_descr->after - |
1365 | port->catch_tr_descr->buf; | |
1366 | DEBUGOUTBUF(printk(KERN_DEBUG | |
1367 | "eol at descr %p -%d (%d)\n", | |
1368 | port->catch_tr_descr, | |
1369 | sent, | |
1370 | port->out_buf_count)); | |
1371 | ||
1372 | port->out_buf_count -= sent; | |
1373 | ||
1374 | /* Update read pointer to first free byte, we | |
1375 | * may already be writing data there. */ | |
1376 | port->out_rd_ptr = | |
1377 | phys_to_virt((int) port->catch_tr_descr->after); | |
1378 | if (port->out_rd_ptr > port->out_buffer + | |
1379 | OUT_BUFFER_SIZE) | |
1380 | port->out_rd_ptr = port->out_buffer; | |
1381 | ||
1382 | reg_sser_rw_tr_cfg tr_cfg = | |
1383 | REG_RD(sser, port->regi_sser, rw_tr_cfg); | |
1384 | DEBUGTXINT(printk(KERN_DEBUG | |
1385 | "tr_int DMA stop %d, set catch @ %p\n", | |
1386 | port->out_buf_count, | |
1387 | port->active_tr_descr)); | |
1388 | if (port->out_buf_count != 0) | |
1389 | printk(KERN_CRIT "sync_ser: buffer not " | |
1390 | "empty after eol.\n"); | |
1391 | port->catch_tr_descr = port->active_tr_descr; | |
1392 | port->tr_running = 0; | |
1393 | tr_cfg.tr_en = regk_sser_no; | |
1394 | REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg); | |
51533b61 | 1395 | } |
e908dfc3 JN |
1396 | /* wake up the waiting process */ |
1397 | wake_up_interruptible(&port->out_wait_q); | |
51533b61 MS |
1398 | } |
1399 | return IRQ_RETVAL(found); | |
1400 | } /* tr_interrupt */ | |
1401 | ||
e908dfc3 | 1402 | static irqreturn_t rx_interrupt(int irq, void *dev_id) |
51533b61 MS |
1403 | { |
1404 | reg_dma_r_masked_intr masked; | |
1405 | reg_dma_rw_ack_intr ack_intr = {.data = regk_dma_yes}; | |
1406 | ||
1407 | int i; | |
1408 | int found = 0; | |
1409 | ||
e908dfc3 | 1410 | for (i = 0; i < NBR_PORTS; i++) |
51533b61 MS |
1411 | { |
1412 | sync_port *port = &ports[i]; | |
1413 | ||
1414 | if (!port->enabled || !port->use_dma ) | |
1415 | continue; | |
1416 | ||
1417 | masked = REG_RD(dma, port->regi_dmain, r_masked_intr); | |
1418 | ||
1419 | if (masked.data) /* Descriptor interrupt */ | |
1420 | { | |
1421 | found = 1; | |
1422 | while (REG_RD(dma, port->regi_dmain, rw_data) != | |
1423 | virt_to_phys(port->next_rx_desc)) { | |
e908dfc3 | 1424 | DEBUGRXINT(printk(KERN_DEBUG "!")); |
51533b61 MS |
1425 | if (port->writep + port->inbufchunk > port->flip + port->in_buffer_size) { |
1426 | int first_size = port->flip + port->in_buffer_size - port->writep; | |
1427 | memcpy((char*)port->writep, phys_to_virt((unsigned)port->next_rx_desc->buf), first_size); | |
1428 | memcpy(port->flip, phys_to_virt((unsigned)port->next_rx_desc->buf+first_size), port->inbufchunk - first_size); | |
1429 | port->writep = port->flip + port->inbufchunk - first_size; | |
1430 | } else { | |
1431 | memcpy((char*)port->writep, | |
1432 | phys_to_virt((unsigned)port->next_rx_desc->buf), | |
1433 | port->inbufchunk); | |
1434 | port->writep += port->inbufchunk; | |
1435 | if (port->writep >= port->flip + port->in_buffer_size) | |
1436 | port->writep = port->flip; | |
1437 | } | |
1438 | if (port->writep == port->readp) | |
1439 | { | |
1440 | port->full = 1; | |
1441 | } | |
1442 | ||
e908dfc3 JN |
1443 | port->next_rx_desc->eol = 1; |
1444 | port->prev_rx_desc->eol = 0; | |
1445 | /* Cache bug workaround */ | |
1446 | flush_dma_descr(port->prev_rx_desc, 0); | |
1447 | port->prev_rx_desc = port->next_rx_desc; | |
51533b61 | 1448 | port->next_rx_desc = phys_to_virt((unsigned)port->next_rx_desc->next); |
e908dfc3 JN |
1449 | /* Cache bug workaround */ |
1450 | flush_dma_descr(port->prev_rx_desc, 1); | |
1451 | /* wake up the waiting process */ | |
1452 | wake_up_interruptible(&port->in_wait_q); | |
51533b61 MS |
1453 | DMA_CONTINUE(port->regi_dmain); |
1454 | REG_WR(dma, port->regi_dmain, rw_ack_intr, ack_intr); | |
1455 | ||
1456 | } | |
1457 | } | |
1458 | } | |
1459 | return IRQ_RETVAL(found); | |
1460 | } /* rx_interrupt */ | |
1461 | #endif /* SYNC_SER_DMA */ | |
1462 | ||
1463 | #ifdef SYNC_SER_MANUAL | |
e908dfc3 | 1464 | static irqreturn_t manual_interrupt(int irq, void *dev_id) |
51533b61 MS |
1465 | { |
1466 | int i; | |
1467 | int found = 0; | |
1468 | reg_sser_r_masked_intr masked; | |
1469 | ||
e908dfc3 | 1470 | for (i = 0; i < NBR_PORTS; i++) |
51533b61 | 1471 | { |
e908dfc3 | 1472 | sync_port *port = &ports[i]; |
51533b61 MS |
1473 | |
1474 | if (!port->enabled || port->use_dma) | |
1475 | { | |
1476 | continue; | |
1477 | } | |
1478 | ||
1479 | masked = REG_RD(sser, port->regi_sser, r_masked_intr); | |
1480 | if (masked.rdav) /* Data received? */ | |
1481 | { | |
1482 | reg_sser_rw_rec_cfg rec_cfg = REG_RD(sser, port->regi_sser, rw_rec_cfg); | |
1483 | reg_sser_r_rec_data data = REG_RD(sser, port->regi_sser, r_rec_data); | |
1484 | found = 1; | |
1485 | /* Read data */ | |
1486 | switch(rec_cfg.sample_size) | |
1487 | { | |
1488 | case 8: | |
1489 | *port->writep++ = data.data & 0xff; | |
1490 | break; | |
1491 | case 12: | |
1492 | *port->writep = (data.data & 0x0ff0) >> 4; | |
1493 | *(port->writep + 1) = data.data & 0x0f; | |
1494 | port->writep+=2; | |
1495 | break; | |
1496 | case 16: | |
1497 | *(unsigned short*)port->writep = data.data; | |
1498 | port->writep+=2; | |
1499 | break; | |
1500 | case 24: | |
1501 | *(unsigned int*)port->writep = data.data; | |
1502 | port->writep+=3; | |
1503 | break; | |
1504 | case 32: | |
1505 | *(unsigned int*)port->writep = data.data; | |
1506 | port->writep+=4; | |
1507 | break; | |
1508 | } | |
1509 | ||
1510 | if (port->writep >= port->flip + port->in_buffer_size) /* Wrap? */ | |
1511 | port->writep = port->flip; | |
1512 | if (port->writep == port->readp) { | |
1513 | /* receive buffer overrun, discard oldest data | |
1514 | */ | |
1515 | port->readp++; | |
1516 | if (port->readp >= port->flip + port->in_buffer_size) /* Wrap? */ | |
1517 | port->readp = port->flip; | |
1518 | } | |
1519 | if (sync_data_avail(port) >= port->inbufchunk) | |
1520 | wake_up_interruptible(&port->in_wait_q); /* Wake up application */ | |
1521 | } | |
1522 | ||
1523 | if (masked.trdy) /* Transmitter ready? */ | |
1524 | { | |
1525 | found = 1; | |
e908dfc3 | 1526 | if (port->out_buf_count > 0) /* More data to send */ |
51533b61 MS |
1527 | send_word(port); |
1528 | else /* transmission finished */ | |
1529 | { | |
1530 | reg_sser_rw_intr_mask intr_mask; | |
1531 | intr_mask = REG_RD(sser, port->regi_sser, rw_intr_mask); | |
1532 | intr_mask.trdy = 0; | |
1533 | REG_WR(sser, port->regi_sser, rw_intr_mask, intr_mask); | |
1534 | wake_up_interruptible(&port->out_wait_q); /* Wake up application */ | |
1535 | } | |
1536 | } | |
1537 | } | |
1538 | return IRQ_RETVAL(found); | |
1539 | } | |
1540 | #endif | |
1541 | ||
1542 | module_init(etrax_sync_serial_init); |