projects / linux-2.6-block.git / blame
| Commit | Line | Data |
|---|---|---|
| 1394f032 BW |
1 | /* |
| 2 | * File: arch/blackfin/mach-bf561/head.S | |
| 3 | * Based on: arch/blackfin/mach-bf533/head.S | |
| 4 | * Author: | |
| 5 | * | |
| 6 | * Created: | |
| 7 | * Description: BF561 startup file | |
| 8 | * | |
| 9 | * Modified: | |
| 10 | * Copyright 2004-2006 Analog Devices Inc. | |
| 11 | * | |
| 12 | * Bugs: Enter bugs at http://blackfin.uclinux.org/ | |
| 13 | * | |
| 14 | * This program is free software; you can redistribute it and/or modify | |
| 15 | * it under the terms of the GNU General Public License as published by | |
| 16 | * the Free Software Foundation; either version 2 of the License, or | |
| 17 | * (at your option) any later version. | |
| 18 | * | |
| 19 | * This program is distributed in the hope that it will be useful, | |
| 20 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 21 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 22 | * GNU General Public License for more details. | |
| 23 | * | |
| 24 | * You should have received a copy of the GNU General Public License | |
| 25 | * along with this program; if not, see the file COPYING, or write | |
| 26 | * to the Free Software Foundation, Inc., | |
| 27 | * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
| 28 | */ | |
| 29 | ||
| 30 | #include <linux/linkage.h> | |
| 52a07812 | 31 | #include <linux/init.h> |
| 1394f032 | 32 | #include <asm/blackfin.h> |
| 17e89bcf | 33 | #ifdef CONFIG_BFIN_KERNEL_CLOCK |
| 639f6571 BW |
34 | #include <asm/clocks.h> |
| 35 | #include <mach/mem_init.h> | |
| 1394f032 BW |
36 | #endif |
| 37 | ||
| 1394f032 | 38 | .section .l1.text |
| 17e89bcf | 39 | #ifdef CONFIG_BFIN_KERNEL_CLOCK |
| 1394f032 BW |
40 | ENTRY(_start_dma_code) |
| 41 | p0.h = hi(SICA_IWR0); | |
| 42 | p0.l = lo(SICA_IWR0); | |
| 43 | r0.l = 0x1; | |
| 44 | [p0] = r0; | |
| 45 | SSYNC; | |
| 46 | ||
| 47 | /* | |
| 48 | * Set PLL_CTL | |
| 49 | * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors | |
| 50 | * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK | |
| 51 | * - [7] = output delay (add 200ps of delay to mem signals) | |
| 52 | * - [6] = input delay (add 200ps of input delay to mem signals) | |
| 53 | * - [5] = PDWN : 1=All Clocks off | |
| 54 | * - [3] = STOPCK : 1=Core Clock off | |
| 55 | * - [1] = PLL_OFF : 1=Disable Power to PLL | |
| 56 | * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL | |
| 57 | * all other bits set to zero | |
| 58 | */ | |
| 59 | ||
| 60 | p0.h = hi(PLL_LOCKCNT); | |
| 61 | p0.l = lo(PLL_LOCKCNT); | |
| 62 | r0 = 0x300(Z); | |
| 63 | w[p0] = r0.l; | |
| 64 | ssync; | |
| 65 | ||
| 66 | P2.H = hi(EBIU_SDGCTL); | |
| 67 | P2.L = lo(EBIU_SDGCTL); | |
| 68 | R0 = [P2]; | |
| 69 | BITSET (R0, 24); | |
| 70 | [P2] = R0; | |
| 71 | SSYNC; | |
| 72 | ||
| 73 | r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ | |
| 74 | r0 = r0 << 9; /* Shift it over, */ | |
| 75 | r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/ | |
| 76 | r0 = r1 | r0; | |
| 77 | r1 = PLL_BYPASS; /* Bypass the PLL? */ | |
| 78 | r1 = r1 << 8; /* Shift it over */ | |
| 79 | r0 = r1 | r0; /* add them all together */ | |
| 80 | ||
| 81 | p0.h = hi(PLL_CTL); | |
| 82 | p0.l = lo(PLL_CTL); /* Load the address */ | |
| 83 | cli r2; /* Disable interrupts */ | |
| 84 | ssync; | |
| 85 | w[p0] = r0.l; /* Set the value */ | |
| 86 | idle; /* Wait for the PLL to stablize */ | |
| 87 | sti r2; /* Enable interrupts */ | |
| 88 | ||
| 89 | .Lcheck_again: | |
| 90 | p0.h = hi(PLL_STAT); | |
| 91 | p0.l = lo(PLL_STAT); | |
| 92 | R0 = W[P0](Z); | |
| 93 | CC = BITTST(R0,5); | |
| 94 | if ! CC jump .Lcheck_again; | |
| 95 | ||
| 96 | /* Configure SCLK & CCLK Dividers */ | |
| 83a5c3e3 | 97 | r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); |
| 1394f032 BW |
98 | p0.h = hi(PLL_DIV); |
| 99 | p0.l = lo(PLL_DIV); | |
| 100 | w[p0] = r0.l; | |
| 101 | ssync; | |
| 102 | ||
| 103 | p0.l = lo(EBIU_SDRRC); | |
| 104 | p0.h = hi(EBIU_SDRRC); | |
| 105 | r0 = mem_SDRRC; | |
| 106 | w[p0] = r0.l; | |
| 107 | ssync; | |
| 108 | ||
| 1394f032 BW |
109 | P2.H = hi(EBIU_SDGCTL); |
| 110 | P2.L = lo(EBIU_SDGCTL); | |
| 111 | R0 = [P2]; | |
| 112 | BITCLR (R0, 24); | |
| 113 | p0.h = hi(EBIU_SDSTAT); | |
| 114 | p0.l = lo(EBIU_SDSTAT); | |
| 115 | r2.l = w[p0]; | |
| 116 | cc = bittst(r2,3); | |
| 117 | if !cc jump .Lskip; | |
| 118 | NOP; | |
| 119 | BITSET (R0, 23); | |
| 120 | .Lskip: | |
| 121 | [P2] = R0; | |
| 122 | SSYNC; | |
| 123 | ||
| 124 | R0.L = lo(mem_SDGCTL); | |
| 125 | R0.H = hi(mem_SDGCTL); | |
| 126 | R1 = [p2]; | |
| 127 | R1 = R1 | R0; | |
| 128 | [P2] = R1; | |
| 129 | SSYNC; | |
| 130 | ||
| 131 | RTS; | |
| 52a07812 | 132 | ENDPROC(_start_dma_code) |
| 1394f032 | 133 | #endif /* CONFIG_BFIN_KERNEL_CLOCK */ |