Commit | Line | Data |
---|---|---|
24a07a12 RH |
1 | /* |
2 | * File: arch/blackfin/mach-bf548/boards/ezkit.c | |
3 | * Based on: arch/blackfin/mach-bf537/boards/ezkit.c | |
4 | * Author: Aidan Williams <aidan@nicta.com.au> | |
5 | * | |
6 | * Created: | |
7 | * Description: | |
8 | * | |
9 | * Modified: | |
10 | * Copyright 2005 National ICT Australia (NICTA) | |
11 | * Copyright 2004-2007 Analog Devices Inc. | |
12 | * | |
13 | * Bugs: Enter bugs at http://blackfin.uclinux.org/ | |
14 | * | |
15 | * This program is free software; you can redistribute it and/or modify | |
16 | * it under the terms of the GNU General Public License as published by | |
17 | * the Free Software Foundation; either version 2 of the License, or | |
18 | * (at your option) any later version. | |
19 | * | |
20 | * This program is distributed in the hope that it will be useful, | |
21 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
22 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
23 | * GNU General Public License for more details. | |
24 | * | |
25 | * You should have received a copy of the GNU General Public License | |
26 | * along with this program; if not, see the file COPYING, or write | |
27 | * to the Free Software Foundation, Inc., | |
28 | * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
29 | */ | |
30 | ||
31 | #include <linux/device.h> | |
32 | #include <linux/platform_device.h> | |
33 | #include <linux/mtd/mtd.h> | |
34 | #include <linux/mtd/partitions.h> | |
35 | #include <linux/spi/spi.h> | |
36 | #include <linux/spi/flash.h> | |
1f83b8f1 | 37 | #include <linux/irq.h> |
24a07a12 | 38 | #include <linux/interrupt.h> |
c6c4d7bb | 39 | #include <linux/usb/musb.h> |
24a07a12 | 40 | #include <asm/bfin5xx_spi.h> |
c6c4d7bb BW |
41 | #include <asm/cplb.h> |
42 | #include <asm/dma.h> | |
43 | #include <asm/gpio.h> | |
44 | #include <asm/nand.h> | |
5d448dd5 | 45 | #include <asm/portmux.h> |
c6c4d7bb BW |
46 | #include <asm/mach/bf54x_keys.h> |
47 | #include <linux/input.h> | |
48 | #include <linux/spi/ad7877.h> | |
24a07a12 RH |
49 | |
50 | /* | |
51 | * Name the Board for the /proc/cpuinfo | |
52 | */ | |
066954a3 | 53 | const char bfin_board_name[] = "ADSP-BF548-EZKIT"; |
24a07a12 RH |
54 | |
55 | /* | |
56 | * Driver needs to know address, irq and flag pin. | |
57 | */ | |
58 | ||
c6c4d7bb BW |
59 | #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) |
60 | ||
61 | #include <asm/mach/bf54x-lq043.h> | |
62 | ||
63 | static struct bfin_bf54xfb_mach_info bf54x_lq043_data = { | |
64 | .width = 480, | |
65 | .height = 272, | |
66 | .xres = {480, 480, 480}, | |
67 | .yres = {272, 272, 272}, | |
68 | .bpp = {24, 24, 24}, | |
69 | .disp = GPIO_PE3, | |
70 | }; | |
71 | ||
72 | static struct resource bf54x_lq043_resources[] = { | |
73 | { | |
74 | .start = IRQ_EPPI0_ERR, | |
75 | .end = IRQ_EPPI0_ERR, | |
76 | .flags = IORESOURCE_IRQ, | |
77 | }, | |
78 | }; | |
79 | ||
80 | static struct platform_device bf54x_lq043_device = { | |
81 | .name = "bf54x-lq043", | |
82 | .id = -1, | |
83 | .num_resources = ARRAY_SIZE(bf54x_lq043_resources), | |
84 | .resource = bf54x_lq043_resources, | |
85 | .dev = { | |
86 | .platform_data = &bf54x_lq043_data, | |
87 | }, | |
88 | }; | |
89 | #endif | |
90 | ||
91 | #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE) | |
8f740ef3 | 92 | static const unsigned int bf548_keymap[] = { |
c6c4d7bb BW |
93 | KEYVAL(0, 0, KEY_ENTER), |
94 | KEYVAL(0, 1, KEY_HELP), | |
95 | KEYVAL(0, 2, KEY_0), | |
96 | KEYVAL(0, 3, KEY_BACKSPACE), | |
97 | KEYVAL(1, 0, KEY_TAB), | |
98 | KEYVAL(1, 1, KEY_9), | |
99 | KEYVAL(1, 2, KEY_8), | |
100 | KEYVAL(1, 3, KEY_7), | |
101 | KEYVAL(2, 0, KEY_DOWN), | |
102 | KEYVAL(2, 1, KEY_6), | |
103 | KEYVAL(2, 2, KEY_5), | |
104 | KEYVAL(2, 3, KEY_4), | |
105 | KEYVAL(3, 0, KEY_UP), | |
106 | KEYVAL(3, 1, KEY_3), | |
107 | KEYVAL(3, 2, KEY_2), | |
108 | KEYVAL(3, 3, KEY_1), | |
109 | }; | |
110 | ||
111 | static struct bfin_kpad_platform_data bf54x_kpad_data = { | |
112 | .rows = 4, | |
113 | .cols = 4, | |
8f740ef3 MH |
114 | .keymap = bf548_keymap, |
115 | .keymapsize = ARRAY_SIZE(bf548_keymap), | |
c6c4d7bb BW |
116 | .repeat = 0, |
117 | .debounce_time = 5000, /* ns (5ms) */ | |
118 | .coldrive_time = 1000, /* ns (1ms) */ | |
119 | .keyup_test_interval = 50, /* ms (50ms) */ | |
120 | }; | |
121 | ||
122 | static struct resource bf54x_kpad_resources[] = { | |
123 | { | |
124 | .start = IRQ_KEY, | |
125 | .end = IRQ_KEY, | |
126 | .flags = IORESOURCE_IRQ, | |
127 | }, | |
128 | }; | |
129 | ||
130 | static struct platform_device bf54x_kpad_device = { | |
131 | .name = "bf54x-keys", | |
132 | .id = -1, | |
133 | .num_resources = ARRAY_SIZE(bf54x_kpad_resources), | |
134 | .resource = bf54x_kpad_resources, | |
135 | .dev = { | |
136 | .platform_data = &bf54x_kpad_data, | |
137 | }, | |
138 | }; | |
139 | #endif | |
140 | ||
24a07a12 RH |
141 | #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) |
142 | static struct platform_device rtc_device = { | |
143 | .name = "rtc-bfin", | |
144 | .id = -1, | |
145 | }; | |
146 | #endif | |
147 | ||
148 | #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) | |
149 | static struct resource bfin_uart_resources[] = { | |
150 | #ifdef CONFIG_SERIAL_BFIN_UART0 | |
151 | { | |
152 | .start = 0xFFC00400, | |
153 | .end = 0xFFC004FF, | |
154 | .flags = IORESOURCE_MEM, | |
155 | }, | |
156 | #endif | |
157 | #ifdef CONFIG_SERIAL_BFIN_UART1 | |
158 | { | |
159 | .start = 0xFFC02000, | |
160 | .end = 0xFFC020FF, | |
161 | .flags = IORESOURCE_MEM, | |
162 | }, | |
163 | #endif | |
164 | #ifdef CONFIG_SERIAL_BFIN_UART2 | |
165 | { | |
166 | .start = 0xFFC02100, | |
167 | .end = 0xFFC021FF, | |
168 | .flags = IORESOURCE_MEM, | |
169 | }, | |
170 | #endif | |
171 | #ifdef CONFIG_SERIAL_BFIN_UART3 | |
172 | { | |
173 | .start = 0xFFC03100, | |
174 | .end = 0xFFC031FF, | |
175 | }, | |
176 | #endif | |
177 | }; | |
178 | ||
179 | static struct platform_device bfin_uart_device = { | |
180 | .name = "bfin-uart", | |
181 | .id = 1, | |
182 | .num_resources = ARRAY_SIZE(bfin_uart_resources), | |
183 | .resource = bfin_uart_resources, | |
184 | }; | |
185 | #endif | |
186 | ||
c6c4d7bb BW |
187 | #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) |
188 | static struct resource smsc911x_resources[] = { | |
189 | { | |
190 | .name = "smsc911x-memory", | |
191 | .start = 0x24000000, | |
192 | .end = 0x24000000 + 0xFF, | |
193 | .flags = IORESOURCE_MEM, | |
194 | }, | |
195 | { | |
196 | .start = IRQ_PE8, | |
197 | .end = IRQ_PE8, | |
198 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, | |
199 | }, | |
200 | }; | |
201 | static struct platform_device smsc911x_device = { | |
202 | .name = "smsc911x", | |
203 | .id = 0, | |
204 | .num_resources = ARRAY_SIZE(smsc911x_resources), | |
205 | .resource = smsc911x_resources, | |
206 | }; | |
207 | #endif | |
208 | ||
c6c4d7bb BW |
209 | #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) |
210 | static struct resource musb_resources[] = { | |
211 | [0] = { | |
212 | .start = 0xFFC03C00, | |
213 | .end = 0xFFC040FF, | |
214 | .flags = IORESOURCE_MEM, | |
215 | }, | |
216 | [1] = { /* general IRQ */ | |
217 | .start = IRQ_USB_INT0, | |
218 | .end = IRQ_USB_INT0, | |
219 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
220 | }, | |
221 | [2] = { /* DMA IRQ */ | |
222 | .start = IRQ_USB_DMA, | |
223 | .end = IRQ_USB_DMA, | |
224 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
225 | }, | |
226 | }; | |
227 | ||
228 | static struct musb_hdrc_platform_data musb_plat = { | |
229 | #ifdef CONFIG_USB_MUSB_OTG | |
230 | .mode = MUSB_OTG, | |
231 | #elif CONFIG_USB_MUSB_HDRC_HCD | |
232 | .mode = MUSB_HOST, | |
233 | #elif CONFIG_USB_GADGET_MUSB_HDRC | |
234 | .mode = MUSB_PERIPHERAL, | |
235 | #endif | |
236 | .multipoint = 1, | |
237 | }; | |
238 | ||
239 | static u64 musb_dmamask = ~(u32)0; | |
240 | ||
241 | static struct platform_device musb_device = { | |
242 | .name = "musb_hdrc", | |
243 | .id = 0, | |
244 | .dev = { | |
245 | .dma_mask = &musb_dmamask, | |
246 | .coherent_dma_mask = 0xffffffff, | |
247 | .platform_data = &musb_plat, | |
248 | }, | |
249 | .num_resources = ARRAY_SIZE(musb_resources), | |
250 | .resource = musb_resources, | |
251 | }; | |
252 | #endif | |
253 | ||
254 | #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) | |
255 | static struct resource bfin_atapi_resources[] = { | |
256 | { | |
257 | .start = 0xFFC03800, | |
258 | .end = 0xFFC0386F, | |
259 | .flags = IORESOURCE_MEM, | |
260 | }, | |
261 | { | |
262 | .start = IRQ_ATAPI_ERR, | |
263 | .end = IRQ_ATAPI_ERR, | |
264 | .flags = IORESOURCE_IRQ, | |
265 | }, | |
266 | }; | |
267 | ||
268 | static struct platform_device bfin_atapi_device = { | |
269 | .name = "pata-bf54x", | |
270 | .id = -1, | |
271 | .num_resources = ARRAY_SIZE(bfin_atapi_resources), | |
272 | .resource = bfin_atapi_resources, | |
273 | }; | |
274 | #endif | |
275 | ||
276 | #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) | |
277 | static struct mtd_partition partition_info[] = { | |
278 | { | |
279 | .name = "Linux Kernel", | |
280 | .offset = 0, | |
281 | .size = 4 * SIZE_1M, | |
282 | }, | |
283 | { | |
284 | .name = "File System", | |
285 | .offset = 4 * SIZE_1M, | |
286 | .size = (256 - 4) * SIZE_1M, | |
287 | }, | |
288 | }; | |
289 | ||
290 | static struct bf5xx_nand_platform bf5xx_nand_platform = { | |
291 | .page_size = NFC_PG_SIZE_256, | |
292 | .data_width = NFC_NWIDTH_8, | |
293 | .partitions = partition_info, | |
294 | .nr_partitions = ARRAY_SIZE(partition_info), | |
295 | .rd_dly = 3, | |
296 | .wr_dly = 3, | |
297 | }; | |
298 | ||
299 | static struct resource bf5xx_nand_resources[] = { | |
300 | { | |
301 | .start = 0xFFC03B00, | |
302 | .end = 0xFFC03B4F, | |
303 | .flags = IORESOURCE_MEM, | |
304 | }, | |
305 | { | |
306 | .start = CH_NFC, | |
307 | .end = CH_NFC, | |
308 | .flags = IORESOURCE_IRQ, | |
309 | }, | |
310 | }; | |
311 | ||
312 | static struct platform_device bf5xx_nand_device = { | |
313 | .name = "bf5xx-nand", | |
314 | .id = 0, | |
315 | .num_resources = ARRAY_SIZE(bf5xx_nand_resources), | |
316 | .resource = bf5xx_nand_resources, | |
317 | .dev = { | |
318 | .platform_data = &bf5xx_nand_platform, | |
319 | }, | |
320 | }; | |
321 | #endif | |
322 | ||
323 | #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN) | |
324 | static struct platform_device bf54x_sdh_device = { | |
325 | .name = "bfin-sdh", | |
326 | .id = 0, | |
327 | }; | |
328 | #endif | |
329 | ||
330 | #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) | |
331 | /* all SPI peripherals info goes here */ | |
332 | #if defined(CONFIG_MTD_M25P80) \ | |
333 | || defined(CONFIG_MTD_M25P80_MODULE) | |
334 | /* SPI flash chip (m25p16) */ | |
335 | static struct mtd_partition bfin_spi_flash_partitions[] = { | |
336 | { | |
337 | .name = "bootloader", | |
338 | .size = 0x00040000, | |
339 | .offset = 0, | |
340 | .mask_flags = MTD_CAP_ROM | |
341 | }, { | |
342 | .name = "linux kernel", | |
343 | .size = 0x1c0000, | |
344 | .offset = 0x40000 | |
345 | } | |
346 | }; | |
347 | ||
348 | static struct flash_platform_data bfin_spi_flash_data = { | |
349 | .name = "m25p80", | |
350 | .parts = bfin_spi_flash_partitions, | |
351 | .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), | |
352 | .type = "m25p16", | |
353 | }; | |
354 | ||
355 | static struct bfin5xx_spi_chip spi_flash_chip_info = { | |
356 | .enable_dma = 0, /* use dma transfer with this chip*/ | |
357 | .bits_per_word = 8, | |
358 | .cs_change_per_word = 0, | |
359 | }; | |
360 | #endif | |
361 | ||
362 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) | |
363 | static struct bfin5xx_spi_chip spi_ad7877_chip_info = { | |
c7d48966 | 364 | .cs_change_per_word = 0, |
c6c4d7bb BW |
365 | .enable_dma = 0, |
366 | .bits_per_word = 16, | |
367 | }; | |
368 | ||
369 | static const struct ad7877_platform_data bfin_ad7877_ts_info = { | |
370 | .model = 7877, | |
371 | .vref_delay_usecs = 50, /* internal, no capacitor */ | |
372 | .x_plate_ohms = 419, | |
373 | .y_plate_ohms = 486, | |
374 | .pressure_max = 1000, | |
375 | .pressure_min = 0, | |
376 | .stopacq_polarity = 1, | |
377 | .first_conversion_delay = 3, | |
378 | .acquisition_time = 1, | |
379 | .averaging = 1, | |
380 | .pen_down_acc_interval = 1, | |
381 | }; | |
382 | #endif | |
383 | ||
384 | static struct spi_board_info bf54x_spi_board_info[] __initdata = { | |
385 | #if defined(CONFIG_MTD_M25P80) \ | |
386 | || defined(CONFIG_MTD_M25P80_MODULE) | |
387 | { | |
388 | /* the modalias must be the same as spi device driver name */ | |
389 | .modalias = "m25p80", /* Name of spi_driver for this device */ | |
390 | .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ | |
391 | .bus_num = 0, /* Framework bus number */ | |
392 | .chip_select = 1, /* SPI_SSEL1*/ | |
393 | .platform_data = &bfin_spi_flash_data, | |
394 | .controller_data = &spi_flash_chip_info, | |
395 | .mode = SPI_MODE_3, | |
396 | }, | |
397 | #endif | |
398 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) | |
399 | { | |
400 | .modalias = "ad7877", | |
401 | .platform_data = &bfin_ad7877_ts_info, | |
402 | .irq = IRQ_PJ11, | |
403 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | |
404 | .bus_num = 0, | |
405 | .chip_select = 2, | |
406 | .controller_data = &spi_ad7877_chip_info, | |
407 | }, | |
408 | #endif | |
409 | }; | |
410 | ||
411 | /* SPI (0) */ | |
412 | static struct resource bfin_spi0_resource[] = { | |
413 | [0] = { | |
414 | .start = SPI0_REGBASE, | |
415 | .end = SPI0_REGBASE + 0xFF, | |
416 | .flags = IORESOURCE_MEM, | |
417 | }, | |
418 | [1] = { | |
419 | .start = CH_SPI0, | |
420 | .end = CH_SPI0, | |
421 | .flags = IORESOURCE_IRQ, | |
422 | } | |
423 | }; | |
424 | ||
425 | /* SPI (1) */ | |
426 | static struct resource bfin_spi1_resource[] = { | |
427 | [0] = { | |
428 | .start = SPI1_REGBASE, | |
429 | .end = SPI1_REGBASE + 0xFF, | |
430 | .flags = IORESOURCE_MEM, | |
431 | }, | |
432 | [1] = { | |
433 | .start = CH_SPI1, | |
434 | .end = CH_SPI1, | |
435 | .flags = IORESOURCE_IRQ, | |
436 | } | |
437 | }; | |
438 | ||
439 | /* SPI controller data */ | |
5d448dd5 | 440 | static struct bfin5xx_spi_master bf54x_spi_master_info0 = { |
c6c4d7bb BW |
441 | .num_chipselect = 8, |
442 | .enable_dma = 1, /* master has the ability to do dma transfer */ | |
5d448dd5 | 443 | .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, |
c6c4d7bb BW |
444 | }; |
445 | ||
446 | static struct platform_device bf54x_spi_master0 = { | |
447 | .name = "bfin-spi", | |
448 | .id = 0, /* Bus number */ | |
449 | .num_resources = ARRAY_SIZE(bfin_spi0_resource), | |
450 | .resource = bfin_spi0_resource, | |
451 | .dev = { | |
5d448dd5 | 452 | .platform_data = &bf54x_spi_master_info0, /* Passed to driver */ |
c6c4d7bb BW |
453 | }, |
454 | }; | |
455 | ||
5d448dd5 BW |
456 | static struct bfin5xx_spi_master bf54x_spi_master_info1 = { |
457 | .num_chipselect = 8, | |
458 | .enable_dma = 1, /* master has the ability to do dma transfer */ | |
459 | .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0}, | |
460 | }; | |
461 | ||
c6c4d7bb BW |
462 | static struct platform_device bf54x_spi_master1 = { |
463 | .name = "bfin-spi", | |
464 | .id = 1, /* Bus number */ | |
465 | .num_resources = ARRAY_SIZE(bfin_spi1_resource), | |
466 | .resource = bfin_spi1_resource, | |
467 | .dev = { | |
5d448dd5 | 468 | .platform_data = &bf54x_spi_master_info1, /* Passed to driver */ |
c6c4d7bb BW |
469 | }, |
470 | }; | |
471 | #endif /* spi master and devices */ | |
472 | ||
473 | #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) | |
474 | static struct resource bfin_twi0_resource[] = { | |
475 | [0] = { | |
476 | .start = TWI0_REGBASE, | |
477 | .end = TWI0_REGBASE + 0xFF, | |
478 | .flags = IORESOURCE_MEM, | |
479 | }, | |
480 | [1] = { | |
481 | .start = IRQ_TWI0, | |
482 | .end = IRQ_TWI0, | |
483 | .flags = IORESOURCE_IRQ, | |
484 | }, | |
485 | }; | |
486 | ||
487 | static struct platform_device i2c_bfin_twi0_device = { | |
488 | .name = "i2c-bfin-twi", | |
489 | .id = 0, | |
490 | .num_resources = ARRAY_SIZE(bfin_twi0_resource), | |
491 | .resource = bfin_twi0_resource, | |
492 | }; | |
493 | ||
7160e950 | 494 | #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ |
c6c4d7bb BW |
495 | static struct resource bfin_twi1_resource[] = { |
496 | [0] = { | |
497 | .start = TWI1_REGBASE, | |
498 | .end = TWI1_REGBASE + 0xFF, | |
499 | .flags = IORESOURCE_MEM, | |
500 | }, | |
501 | [1] = { | |
502 | .start = IRQ_TWI1, | |
503 | .end = IRQ_TWI1, | |
504 | .flags = IORESOURCE_IRQ, | |
505 | }, | |
506 | }; | |
507 | ||
508 | static struct platform_device i2c_bfin_twi1_device = { | |
509 | .name = "i2c-bfin-twi", | |
510 | .id = 1, | |
511 | .num_resources = ARRAY_SIZE(bfin_twi1_resource), | |
512 | .resource = bfin_twi1_resource, | |
513 | }; | |
514 | #endif | |
7160e950 | 515 | #endif |
c6c4d7bb | 516 | |
24a07a12 RH |
517 | static struct platform_device *ezkit_devices[] __initdata = { |
518 | #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) | |
519 | &rtc_device, | |
520 | #endif | |
521 | ||
522 | #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) | |
523 | &bfin_uart_device, | |
524 | #endif | |
c6c4d7bb BW |
525 | |
526 | #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) | |
527 | &bf54x_lq043_device, | |
528 | #endif | |
529 | ||
530 | #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) | |
531 | &smsc911x_device, | |
532 | #endif | |
533 | ||
c6c4d7bb BW |
534 | #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) |
535 | &musb_device, | |
536 | #endif | |
537 | ||
538 | #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) | |
539 | &bfin_atapi_device, | |
540 | #endif | |
541 | ||
542 | #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) | |
543 | &bf5xx_nand_device, | |
544 | #endif | |
545 | ||
546 | #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN) | |
547 | &bf54x_sdh_device, | |
548 | #endif | |
549 | ||
550 | #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) | |
551 | &bf54x_spi_master0, | |
d4b1d273 | 552 | &bf54x_spi_master1, |
c6c4d7bb BW |
553 | #endif |
554 | ||
555 | #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE) | |
556 | &bf54x_kpad_device, | |
557 | #endif | |
558 | ||
559 | #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) | |
560 | &i2c_bfin_twi0_device, | |
7160e950 | 561 | #if !defined(CONFIG_BF542) |
c6c4d7bb BW |
562 | &i2c_bfin_twi1_device, |
563 | #endif | |
7160e950 | 564 | #endif |
24a07a12 RH |
565 | }; |
566 | ||
567 | static int __init stamp_init(void) | |
568 | { | |
569 | printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); | |
570 | platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); | |
c6c4d7bb BW |
571 | |
572 | #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) | |
573 | spi_register_board_info(bf54x_spi_board_info, | |
574 | ARRAY_SIZE(bf54x_spi_board_info)); | |
575 | #endif | |
576 | ||
24a07a12 RH |
577 | return 0; |
578 | } | |
579 | ||
580 | arch_initcall(stamp_init); |