Commit | Line | Data |
---|---|---|
1394f032 BW |
1 | /* |
2 | * File: arch/blackfin/mach-bf533/head.S | |
3 | * Based on: | |
4 | * Author: Jeff Dionne <jeff@uclinux.org> COPYRIGHT 1998 D. Jeff Dionne | |
5 | * | |
6 | * Created: 1998 | |
7 | * Description: bf533 startup file | |
8 | * | |
9 | * Modified: | |
10 | * Copyright 2004-2006 Analog Devices Inc. | |
11 | * | |
12 | * Bugs: Enter bugs at http://blackfin.uclinux.org/ | |
13 | * | |
14 | * This program is free software; you can redistribute it and/or modify | |
15 | * it under the terms of the GNU General Public License as published by | |
16 | * the Free Software Foundation; either version 2 of the License, or | |
17 | * (at your option) any later version. | |
18 | * | |
19 | * This program is distributed in the hope that it will be useful, | |
20 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
21 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
22 | * GNU General Public License for more details. | |
23 | * | |
24 | * You should have received a copy of the GNU General Public License | |
25 | * along with this program; if not, see the file COPYING, or write | |
26 | * to the Free Software Foundation, Inc., | |
27 | * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
28 | */ | |
29 | ||
30 | #include <linux/linkage.h> | |
52a07812 | 31 | #include <linux/init.h> |
1394f032 | 32 | #include <asm/blackfin.h> |
68e2fc78 | 33 | #ifdef CONFIG_BFIN_KERNEL_CLOCK |
639f6571 BW |
34 | #include <asm/clocks.h> |
35 | #include <mach/mem_init.h> | |
1394f032 | 36 | #endif |
1394f032 | 37 | |
1394f032 | 38 | .section .l1.text |
68e2fc78 | 39 | #ifdef CONFIG_BFIN_KERNEL_CLOCK |
1394f032 BW |
40 | ENTRY(_start_dma_code) |
41 | p0.h = hi(SIC_IWR); | |
42 | p0.l = lo(SIC_IWR); | |
43 | r0.l = 0x1; | |
44 | r0.h = 0x0; | |
45 | [p0] = r0; | |
46 | SSYNC; | |
47 | ||
48 | /* | |
49 | * Set PLL_CTL | |
50 | * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors | |
51 | * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK | |
52 | * - [7] = output delay (add 200ps of delay to mem signals) | |
53 | * - [6] = input delay (add 200ps of input delay to mem signals) | |
54 | * - [5] = PDWN : 1=All Clocks off | |
55 | * - [3] = STOPCK : 1=Core Clock off | |
56 | * - [1] = PLL_OFF : 1=Disable Power to PLL | |
57 | * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL | |
58 | * all other bits set to zero | |
59 | */ | |
60 | ||
61 | p0.h = hi(PLL_LOCKCNT); | |
62 | p0.l = lo(PLL_LOCKCNT); | |
63 | r0 = 0x300(Z); | |
64 | w[p0] = r0.l; | |
65 | ssync; | |
66 | ||
67 | P2.H = hi(EBIU_SDGCTL); | |
68 | P2.L = lo(EBIU_SDGCTL); | |
69 | R0 = [P2]; | |
70 | BITSET (R0, 24); | |
71 | [P2] = R0; | |
72 | SSYNC; | |
73 | ||
74 | r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ | |
75 | r0 = r0 << 9; /* Shift it over, */ | |
76 | r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/ | |
77 | r0 = r1 | r0; | |
78 | r1 = PLL_BYPASS; /* Bypass the PLL? */ | |
79 | r1 = r1 << 8; /* Shift it over */ | |
80 | r0 = r1 | r0; /* add them all together */ | |
81 | ||
82 | p0.h = hi(PLL_CTL); | |
83 | p0.l = lo(PLL_CTL); /* Load the address */ | |
84 | cli r2; /* Disable interrupts */ | |
85 | ssync; | |
86 | w[p0] = r0.l; /* Set the value */ | |
87 | idle; /* Wait for the PLL to stablize */ | |
88 | sti r2; /* Enable interrupts */ | |
89 | ||
90 | .Lcheck_again: | |
91 | p0.h = hi(PLL_STAT); | |
92 | p0.l = lo(PLL_STAT); | |
93 | R0 = W[P0](Z); | |
94 | CC = BITTST(R0,5); | |
95 | if ! CC jump .Lcheck_again; | |
96 | ||
97 | /* Configure SCLK & CCLK Dividers */ | |
98 | r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); | |
99 | p0.h = hi(PLL_DIV); | |
100 | p0.l = lo(PLL_DIV); | |
101 | w[p0] = r0.l; | |
102 | ssync; | |
103 | ||
104 | p0.l = lo(EBIU_SDRRC); | |
105 | p0.h = hi(EBIU_SDRRC); | |
106 | r0 = mem_SDRRC; | |
107 | w[p0] = r0.l; | |
108 | ssync; | |
109 | ||
1394f032 BW |
110 | P2.H = hi(EBIU_SDGCTL); |
111 | P2.L = lo(EBIU_SDGCTL); | |
112 | R0 = [P2]; | |
113 | BITCLR (R0, 24); | |
114 | p0.h = hi(EBIU_SDSTAT); | |
115 | p0.l = lo(EBIU_SDSTAT); | |
116 | r2.l = w[p0]; | |
117 | cc = bittst(r2,3); | |
118 | if !cc jump .Lskip; | |
119 | NOP; | |
120 | BITSET (R0, 23); | |
121 | .Lskip: | |
122 | [P2] = R0; | |
123 | SSYNC; | |
124 | ||
125 | R0.L = lo(mem_SDGCTL); | |
126 | R0.H = hi(mem_SDGCTL); | |
127 | R1 = [p2]; | |
128 | R1 = R1 | R0; | |
129 | [P2] = R1; | |
130 | SSYNC; | |
131 | ||
1394f032 | 132 | RTS; |
52a07812 | 133 | ENDPROC(_start_dma_code) |
1394f032 | 134 | #endif /* CONFIG_BFIN_KERNEL_CLOCK */ |