Commit | Line | Data |
---|---|---|
8d94da58 WC |
1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
2 | ||
3 | /dts-v1/; | |
4 | #include <dt-bindings/gpio/gpio.h> | |
5 | #include <dt-bindings/leds/common.h> | |
6 | #include <dt-bindings/pinctrl/rockchip.h> | |
7 | #include <dt-bindings/soc/rockchip,vop2.h> | |
8 | #include "rk3566.dtsi" | |
9 | ||
10 | / { | |
11 | model = "EmbedFire LubanCat 1"; | |
12 | compatible = "embedfire,lubancat-1", "rockchip,rk3566"; | |
13 | ||
14 | aliases { | |
15 | ethernet0 = &gmac1; | |
16 | mmc0 = &sdmmc0; | |
17 | mmc1 = &sdhci; | |
18 | }; | |
19 | ||
20 | chosen: chosen { | |
21 | stdout-path = "serial2:1500000n8"; | |
22 | }; | |
23 | ||
24 | gmac1_clkin: external-gmac1-clock { | |
25 | compatible = "fixed-clock"; | |
26 | clock-frequency = <125000000>; | |
27 | clock-output-names = "gmac1_clkin"; | |
28 | #clock-cells = <0>; | |
29 | }; | |
30 | ||
31 | hdmi-con { | |
32 | compatible = "hdmi-connector"; | |
33 | type = "a"; | |
34 | ||
35 | port { | |
36 | hdmi_con_in: endpoint { | |
37 | remote-endpoint = <&hdmi_out_con>; | |
38 | }; | |
39 | }; | |
40 | }; | |
41 | ||
42 | gpio-leds { | |
43 | compatible = "gpio-leds"; | |
44 | ||
45 | sys_led: sys-led { | |
46 | label = "sys_led"; | |
47 | linux,default-trigger = "heartbeat"; | |
48 | default-state = "on"; | |
49 | gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>; | |
50 | pinctrl-names = "default"; | |
51 | pinctrl-0 = <&sys_led_pin>; | |
52 | }; | |
53 | }; | |
54 | ||
55 | usb_5v: usb-5v-regulator { | |
56 | compatible = "regulator-fixed"; | |
57 | regulator-name = "usb_5v"; | |
58 | regulator-always-on; | |
59 | regulator-boot-on; | |
60 | regulator-min-microvolt = <5000000>; | |
61 | regulator-max-microvolt = <5000000>; | |
62 | }; | |
63 | ||
64 | vcc5v0_sys: vcc5v0-sys-regulator { | |
65 | compatible = "regulator-fixed"; | |
66 | regulator-name = "vcc5v0_sys"; | |
67 | regulator-always-on; | |
68 | regulator-boot-on; | |
69 | regulator-min-microvolt = <5000000>; | |
70 | regulator-max-microvolt = <5000000>; | |
71 | vin-supply = <&usb_5v>; | |
72 | }; | |
73 | ||
74 | vcc3v3_sys: vcc3v3-sys-regulator { | |
75 | compatible = "regulator-fixed"; | |
76 | regulator-name = "vcc3v3_sys"; | |
77 | regulator-always-on; | |
78 | regulator-boot-on; | |
79 | regulator-min-microvolt = <3300000>; | |
80 | regulator-max-microvolt = <3300000>; | |
81 | vin-supply = <&vcc5v0_sys>; | |
82 | }; | |
83 | ||
84 | vcc3v3_pcie: vcc3v3-pcie-regulator { | |
85 | compatible = "regulator-fixed"; | |
86 | regulator-name = "vcc3v3_pcie"; | |
87 | regulator-min-microvolt = <3300000>; | |
88 | regulator-max-microvolt = <3300000>; | |
89 | enable-active-high; | |
90 | gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; | |
91 | startup-delay-us = <5000>; | |
92 | vin-supply = <&vcc5v0_sys>; | |
93 | }; | |
94 | ||
95 | vcc5v0_usb20_host: vcc5v0-usb20-host-regulator { | |
96 | compatible = "regulator-fixed"; | |
97 | enable-active-high; | |
98 | gpio = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>; | |
99 | pinctrl-names = "default"; | |
100 | pinctrl-0 = <&vcc5v0_usb20_host_en>; | |
101 | regulator-name = "vcc5v0_usb20_host"; | |
102 | regulator-always-on; | |
103 | }; | |
104 | ||
105 | vcc5v0_usb30_host: vcc5v0-usb30-host-regulator { | |
106 | compatible = "regulator-fixed"; | |
107 | enable-active-high; | |
108 | gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; | |
109 | pinctrl-names = "default"; | |
110 | pinctrl-0 = <&vcc5v0_usb30_host_en>; | |
111 | regulator-name = "vcc5v0_usb30_host"; | |
112 | regulator-always-on; | |
113 | }; | |
114 | }; | |
115 | ||
116 | &uart2 { | |
117 | status = "okay"; | |
118 | }; | |
119 | ||
120 | &combphy1 { | |
121 | status = "okay"; | |
122 | }; | |
123 | ||
124 | &combphy2 { | |
125 | status = "okay"; | |
126 | }; | |
127 | ||
128 | &cpu0 { | |
129 | cpu-supply = <&vdd_cpu>; | |
130 | }; | |
131 | ||
132 | &cpu1 { | |
133 | cpu-supply = <&vdd_cpu>; | |
134 | }; | |
135 | ||
136 | &cpu2 { | |
137 | cpu-supply = <&vdd_cpu>; | |
138 | }; | |
139 | ||
140 | &cpu3 { | |
141 | cpu-supply = <&vdd_cpu>; | |
142 | }; | |
143 | ||
144 | &gpu { | |
145 | mali-supply = <&vdd_gpu>; | |
146 | status = "okay"; | |
147 | }; | |
148 | ||
149 | &hdmi { | |
150 | avdd-0v9-supply = <&vdda0v9_image>; | |
151 | avdd-1v8-supply = <&vcca1v8_image>; | |
152 | status = "okay"; | |
153 | }; | |
154 | ||
155 | &hdmi_in { | |
156 | hdmi_in_vp0: endpoint { | |
157 | remote-endpoint = <&vp0_out_hdmi>; | |
158 | }; | |
159 | }; | |
160 | ||
161 | &hdmi_out { | |
162 | hdmi_out_con: endpoint { | |
163 | remote-endpoint = <&hdmi_con_in>; | |
164 | }; | |
165 | }; | |
166 | ||
167 | &hdmi_sound { | |
168 | status = "okay"; | |
169 | }; | |
170 | ||
171 | &i2c0 { | |
172 | status = "okay"; | |
173 | ||
174 | vdd_cpu: regulator@1c { | |
175 | compatible = "tcs,tcs4525"; | |
176 | reg = <0x1c>; | |
177 | fcs,suspend-voltage-selector = <1>; | |
178 | regulator-name = "vdd_cpu"; | |
179 | regulator-always-on; | |
180 | regulator-boot-on; | |
181 | regulator-min-microvolt = <800000>; | |
182 | regulator-max-microvolt = <1150000>; | |
183 | regulator-ramp-delay = <2300>; | |
184 | vin-supply = <&vcc5v0_sys>; | |
185 | ||
186 | regulator-state-mem { | |
187 | regulator-off-in-suspend; | |
188 | }; | |
189 | }; | |
190 | ||
191 | rk809: pmic@20 { | |
192 | compatible = "rockchip,rk809"; | |
193 | reg = <0x20>; | |
194 | interrupt-parent = <&gpio0>; | |
195 | interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; | |
196 | clock-output-names = "rk808-clkout1", "rk808-clkout2"; | |
197 | ||
198 | pinctrl-names = "default"; | |
199 | pinctrl-0 = <&pmic_int>; | |
200 | rockchip,system-power-controller; | |
201 | wakeup-source; | |
202 | #clock-cells = <1>; | |
203 | ||
204 | vcc1-supply = <&vcc3v3_sys>; | |
205 | vcc2-supply = <&vcc3v3_sys>; | |
206 | vcc3-supply = <&vcc3v3_sys>; | |
207 | vcc4-supply = <&vcc3v3_sys>; | |
208 | vcc5-supply = <&vcc3v3_sys>; | |
209 | vcc6-supply = <&vcc3v3_sys>; | |
210 | vcc7-supply = <&vcc3v3_sys>; | |
211 | vcc8-supply = <&vcc3v3_sys>; | |
212 | vcc9-supply = <&vcc3v3_sys>; | |
213 | ||
214 | regulators { | |
215 | vdd_logic: DCDC_REG1 { | |
216 | regulator-name = "vdd_logic"; | |
217 | regulator-always-on; | |
218 | regulator-boot-on; | |
219 | regulator-min-microvolt = <500000>; | |
220 | regulator-max-microvolt = <1350000>; | |
8d94da58 WC |
221 | regulator-ramp-delay = <6001>; |
222 | regulator-initial-mode = <0x2>; | |
223 | ||
224 | regulator-state-mem { | |
225 | regulator-off-in-suspend; | |
226 | }; | |
227 | }; | |
228 | ||
229 | vdd_gpu: DCDC_REG2 { | |
230 | regulator-name = "vdd_gpu"; | |
231 | regulator-always-on; | |
232 | regulator-boot-on; | |
233 | regulator-min-microvolt = <500000>; | |
234 | regulator-max-microvolt = <1350000>; | |
8d94da58 WC |
235 | regulator-ramp-delay = <6001>; |
236 | regulator-initial-mode = <0x2>; | |
237 | ||
238 | regulator-state-mem { | |
239 | regulator-off-in-suspend; | |
240 | }; | |
241 | }; | |
242 | ||
243 | vcc_ddr: DCDC_REG3 { | |
244 | regulator-name = "vcc_ddr"; | |
245 | regulator-always-on; | |
246 | regulator-boot-on; | |
247 | regulator-initial-mode = <0x2>; | |
248 | ||
249 | regulator-state-mem { | |
250 | regulator-on-in-suspend; | |
251 | }; | |
252 | }; | |
253 | ||
254 | vdd_npu: DCDC_REG4 { | |
255 | regulator-name = "vdd_npu"; | |
256 | regulator-always-on; | |
257 | regulator-boot-on; | |
258 | regulator-min-microvolt = <500000>; | |
259 | regulator-max-microvolt = <1350000>; | |
8d94da58 WC |
260 | regulator-ramp-delay = <6001>; |
261 | regulator-initial-mode = <0x2>; | |
262 | ||
263 | regulator-state-mem { | |
264 | regulator-off-in-suspend; | |
265 | }; | |
266 | }; | |
267 | ||
268 | vcc_1v8: DCDC_REG5 { | |
269 | regulator-name = "vcc_1v8"; | |
270 | regulator-always-on; | |
271 | regulator-boot-on; | |
272 | regulator-min-microvolt = <1800000>; | |
273 | regulator-max-microvolt = <1800000>; | |
274 | ||
275 | regulator-state-mem { | |
276 | regulator-off-in-suspend; | |
277 | }; | |
278 | }; | |
279 | ||
280 | vdda0v9_image: LDO_REG1 { | |
281 | regulator-name = "vdda0v9_image"; | |
282 | regulator-boot-on; | |
283 | regulator-always-on; | |
284 | regulator-min-microvolt = <900000>; | |
285 | regulator-max-microvolt = <900000>; | |
286 | ||
287 | regulator-state-mem { | |
288 | regulator-off-in-suspend; | |
289 | }; | |
290 | }; | |
291 | ||
292 | vdda_0v9: LDO_REG2 { | |
293 | regulator-name = "vdda_0v9"; | |
294 | regulator-always-on; | |
295 | regulator-boot-on; | |
296 | regulator-min-microvolt = <900000>; | |
297 | regulator-max-microvolt = <900000>; | |
298 | ||
299 | regulator-state-mem { | |
300 | regulator-off-in-suspend; | |
301 | }; | |
302 | }; | |
303 | ||
304 | vdda0v9_pmu: LDO_REG3 { | |
305 | regulator-name = "vdda0v9_pmu"; | |
306 | regulator-always-on; | |
307 | regulator-boot-on; | |
308 | regulator-min-microvolt = <900000>; | |
309 | regulator-max-microvolt = <900000>; | |
310 | ||
311 | regulator-state-mem { | |
312 | regulator-on-in-suspend; | |
313 | regulator-suspend-microvolt = <900000>; | |
314 | }; | |
315 | }; | |
316 | ||
317 | vccio_acodec: LDO_REG4 { | |
318 | regulator-name = "vccio_acodec"; | |
319 | regulator-always-on; | |
320 | regulator-boot-on; | |
321 | regulator-min-microvolt = <3300000>; | |
322 | regulator-max-microvolt = <3300000>; | |
323 | ||
324 | regulator-state-mem { | |
325 | regulator-off-in-suspend; | |
326 | }; | |
327 | }; | |
328 | ||
329 | vccio_sd: LDO_REG5 { | |
330 | regulator-name = "vccio_sd"; | |
331 | regulator-always-on; | |
332 | regulator-boot-on; | |
333 | regulator-min-microvolt = <1800000>; | |
334 | regulator-max-microvolt = <3300000>; | |
335 | ||
336 | regulator-state-mem { | |
337 | regulator-off-in-suspend; | |
338 | }; | |
339 | }; | |
340 | ||
341 | vcc3v3_pmu: LDO_REG6 { | |
342 | regulator-name = "vcc3v3_pmu"; | |
343 | regulator-always-on; | |
344 | regulator-boot-on; | |
345 | regulator-min-microvolt = <3300000>; | |
346 | regulator-max-microvolt = <3300000>; | |
347 | ||
348 | regulator-state-mem { | |
349 | regulator-on-in-suspend; | |
350 | regulator-suspend-microvolt = <3300000>; | |
351 | }; | |
352 | }; | |
353 | ||
354 | vcca_1v8: LDO_REG7 { | |
355 | regulator-name = "vcca_1v8"; | |
356 | regulator-always-on; | |
357 | regulator-boot-on; | |
358 | regulator-min-microvolt = <1800000>; | |
359 | regulator-max-microvolt = <1800000>; | |
360 | ||
361 | regulator-state-mem { | |
362 | regulator-off-in-suspend; | |
363 | }; | |
364 | }; | |
365 | ||
366 | vcca1v8_pmu: LDO_REG8 { | |
367 | regulator-name = "vcca1v8_pmu"; | |
368 | regulator-always-on; | |
369 | regulator-boot-on; | |
370 | regulator-min-microvolt = <1800000>; | |
371 | regulator-max-microvolt = <1800000>; | |
372 | ||
373 | regulator-state-mem { | |
374 | regulator-on-in-suspend; | |
375 | regulator-suspend-microvolt = <1800000>; | |
376 | }; | |
377 | }; | |
378 | ||
379 | vcca1v8_image: LDO_REG9 { | |
380 | regulator-name = "vcca1v8_image"; | |
381 | regulator-always-on; | |
382 | regulator-boot-on; | |
383 | regulator-min-microvolt = <1800000>; | |
384 | regulator-max-microvolt = <1800000>; | |
385 | ||
386 | regulator-state-mem { | |
387 | regulator-off-in-suspend; | |
388 | }; | |
389 | }; | |
390 | ||
391 | vcc_3v3: SWITCH_REG1 { | |
392 | regulator-name = "vcc_3v3"; | |
393 | regulator-always-on; | |
394 | regulator-boot-on; | |
395 | ||
396 | regulator-state-mem { | |
397 | regulator-off-in-suspend; | |
398 | }; | |
399 | }; | |
400 | ||
401 | vcc3v3_sd: SWITCH_REG2 { | |
402 | regulator-name = "vcc3v3_sd"; | |
403 | regulator-always-on; | |
404 | regulator-boot-on; | |
405 | ||
406 | regulator-state-mem { | |
407 | regulator-off-in-suspend; | |
408 | }; | |
409 | }; | |
410 | }; | |
411 | }; | |
412 | }; | |
413 | ||
414 | &i2s1_8ch { | |
415 | rockchip,trcm-sync-tx-only; | |
416 | status = "okay"; | |
417 | }; | |
418 | ||
419 | &gmac1 { | |
420 | phy-mode = "rgmii"; | |
421 | clock_in_out = "output"; | |
422 | snps,reset-gpio = <&gpio2 RK_PB0 GPIO_ACTIVE_LOW>; | |
423 | snps,reset-active-low; | |
424 | /* Reset time is 75ms, 100ms */ | |
425 | snps,reset-delays-us = <0 75000 100000>; | |
426 | assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; | |
427 | assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; | |
428 | assigned-clock-rates = <0>, <125000000>; | |
429 | pinctrl-names = "default"; | |
430 | pinctrl-0 = <&gmac1m1_miim | |
431 | &gmac1m1_tx_bus2_level3 | |
432 | &gmac1m1_rx_bus2 | |
433 | &gmac1m1_rgmii_clk_level2 | |
434 | &gmac1m1_rgmii_bus_level3>; | |
435 | tx_delay = <0x1a>; | |
436 | rx_delay = <0x0c>; | |
437 | phy-handle = <&rgmii_phy1>; | |
438 | status = "okay"; | |
439 | }; | |
440 | ||
441 | &mdio1 { | |
442 | rgmii_phy1: phy@0 { | |
443 | compatible = "ethernet-phy-ieee802.3-c22"; | |
444 | reg = <0x0>; | |
445 | }; | |
446 | }; | |
447 | ||
448 | &pcie2x1 { | |
449 | reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; | |
8d94da58 WC |
450 | vpcie3v3-supply = <&vcc3v3_pcie>; |
451 | status = "okay"; | |
452 | }; | |
453 | ||
454 | &pinctrl { | |
455 | leds { | |
456 | sys_led_pin: sys-status-led-pin { | |
8586a5d2 | 457 | rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; |
8d94da58 WC |
458 | }; |
459 | }; | |
460 | ||
461 | usb { | |
462 | vcc5v0_usb20_host_en: vcc5v0-usb20-host-en { | |
463 | rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; | |
464 | }; | |
465 | ||
466 | vcc5v0_usb30_host_en: vcc5v0-usb30-host-en { | |
467 | rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; | |
468 | }; | |
469 | }; | |
470 | ||
471 | pmic { | |
472 | pmic_int: pmic_int { | |
473 | rockchip,pins = | |
474 | <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; | |
475 | }; | |
476 | }; | |
477 | }; | |
478 | ||
479 | &pmu_io_domains { | |
480 | pmuio2-supply = <&vcc3v3_pmu>; | |
481 | vccio1-supply = <&vccio_acodec>; | |
482 | vccio3-supply = <&vccio_sd>; | |
483 | vccio4-supply = <&vcc_3v3>; | |
484 | vccio5-supply = <&vcc_3v3>; | |
485 | vccio6-supply = <&vcc_1v8>; | |
486 | vccio7-supply = <&vcc_3v3>; | |
487 | status = "okay"; | |
488 | }; | |
489 | ||
490 | &saradc { | |
491 | vref-supply = <&vcca_1v8>; | |
492 | status = "okay"; | |
493 | }; | |
494 | ||
495 | &tsadc { | |
496 | rockchip,hw-tshut-mode = <1>; | |
497 | rockchip,hw-tshut-polarity = <0>; | |
498 | status = "okay"; | |
499 | }; | |
500 | ||
501 | &sdhci { | |
502 | assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>, <&cru CCLK_EMMC>; | |
503 | assigned-clock-rates = <200000000>, <24000000>, <200000000>; | |
504 | bus-width = <8>; | |
505 | max-frequency = <200000000>; | |
506 | mmc-hs200-1_8v; | |
507 | non-removable; | |
508 | pinctrl-names = "default"; | |
509 | pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>; | |
510 | supports-emmc; | |
511 | status = "okay"; | |
512 | }; | |
513 | ||
514 | &sdmmc0 { | |
515 | max-frequency = <150000000>; | |
516 | supports-sd; | |
517 | bus-width = <4>; | |
518 | cap-mmc-highspeed; | |
519 | cap-sd-highspeed; | |
520 | disable-wp; | |
521 | sd-uhs-sdr104; | |
522 | vmmc-supply = <&vcc3v3_sd>; | |
523 | vqmmc-supply = <&vccio_sd>; | |
524 | pinctrl-names = "default"; | |
525 | pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; | |
526 | status = "okay"; | |
527 | }; | |
528 | ||
529 | /* USB OTG/USB Host_1 USB 2.0 Comb */ | |
530 | &usb2phy0 { | |
531 | status = "okay"; | |
532 | }; | |
533 | ||
534 | &usb2phy0_host { | |
535 | status = "okay"; | |
536 | }; | |
537 | ||
538 | &usb2phy0_otg { | |
539 | status = "okay"; | |
540 | }; | |
541 | ||
542 | &usb_host0_ehci { | |
543 | status = "okay"; | |
544 | }; | |
545 | ||
546 | &usb_host0_ohci { | |
547 | status = "okay"; | |
548 | }; | |
549 | ||
550 | /* USB Host_2/USB Host_3 USB 2.0 Comb */ | |
551 | &usb2phy1 { | |
552 | status = "okay"; | |
553 | }; | |
554 | ||
555 | &usb2phy1_host { | |
556 | status = "okay"; | |
557 | }; | |
558 | ||
559 | &usb2phy1_otg { | |
560 | status = "okay"; | |
561 | }; | |
562 | ||
563 | &usb_host1_ehci { | |
564 | status = "okay"; | |
565 | }; | |
566 | ||
567 | &usb_host1_ohci { | |
568 | status = "okay"; | |
569 | }; | |
570 | ||
571 | /* USB3.0 Host */ | |
572 | &usb_host1_xhci { | |
573 | status = "okay"; | |
574 | }; | |
575 | ||
576 | &vop { | |
577 | assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; | |
578 | assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; | |
579 | status = "okay"; | |
580 | }; | |
581 | ||
582 | &vop_mmu { | |
583 | status = "okay"; | |
584 | }; | |
585 | ||
586 | &vp0 { | |
587 | vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { | |
588 | reg = <ROCKCHIP_VOP2_EP_HDMI0>; | |
589 | remote-endpoint = <&hdmi_in_vp0>; | |
590 | }; | |
591 | }; |