[linux-2.6-block.git] / arch / arm64 / boot / dts / qcom / sc7180-trogdor-homestar.dtsi

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Google Homestar board device tree source
 *
 * Copyright 2021 Google LLC.
 */

/* This file must be included after sc7180-trogdor.dtsi */

/ {
	/* BOARD-SPECIFIC TOP LEVEL NODES */

	max98360a_1: max98360a_1 {
		compatible = "maxim,max98360a";
		#sound-dai-cells = <0>;
	};

	max98360a_2: max98360a_2 {
		compatible = "maxim,max98360a";
		#sound-dai-cells = <0>;
	};

	max98360a_3: max98360a_3 {
		compatible = "maxim,max98360a";
		#sound-dai-cells = <0>;
	};

	pp3300_touch: pp3300-touch {
		compatible = "regulator-fixed";
		regulator-name = "pp3300_touch";

		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;

		gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>;
		enable-active-high;
		pinctrl-names = "default";
		pinctrl-0 = <&en_pp3300_touch>;

		vin-supply = <&pp3300_a>;
	};

	thermal-zones {
		skin_temp_thermal: skin-temp-thermal {
			polling-delay-passive = <250>;
			polling-delay = <0>;

			thermal-sensors = <&pm6150_adc_tm 1>;
			sustainable-power = <965>;

			trips {
				skin_temp_alert0: trip-point0 {
					temperature = <55000>;
					hysteresis = <1000>;
					type = "passive";
				};

				skin_temp_alert1: trip-point1 {
					temperature = <58000>;
					hysteresis = <1000>;
					type = "passive";
				};

				skin-temp-crit {
					temperature = <73000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&skin_temp_alert0>;
					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};

				map1 {
					trip = <&skin_temp_alert1>;
					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};
	};
};

ap_ts_pen_1v8: &i2c4 {
	status = "okay";
	clock-frequency = <400000>;

	ap_ts: touchscreen@14 {
		compatible = "goodix,gt7375p";
		reg = <0x14>;
		pinctrl-names = "default";
		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;

		interrupt-parent = <&tlmm>;
		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;

		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;

		vdd-supply = <&pp3300_touch>;
	};
};

/* Panel controls backlight over aux channel */

&backlight {
	status = "disabled";
};

&camcc {
	status = "okay";
};

&panel {
	compatible = "samsung,atna33xc20";
	enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
	/delete-property/ backlight;
};

&pm6150_adc {
	skin-temp-thermistor@4d {
		reg = <ADC5_AMUX_THM1_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
	};
};

&pm6150_adc_tm {
	status = "okay";

	skin-temp-thermistor@1 {
		reg = <1>;
		io-channels = <&pm6150_adc ADC5_AMUX_THM1_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time-us = <200>;
	};
};

&pp1800_uf_cam {
	status = "okay";
};

&pp1800_wf_cam {
	status = "okay";
};

&pp2800_uf_cam {
	status = "okay";
};

&pp2800_wf_cam {
	status = "okay";
};

&pp3300_dx_edp {
	gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
};

&secondary_mi2s {
	qcom,playback-sd-lines = <0 1>;
};

&sound_multimedia1_codec {
	sound-dai = <&max98360a>, <&max98360a_1>, <&max98360a_2>, <&max98360a_3> ;
};

&wifi {
	qcom,ath10k-calibration-variant = "GO_HOMESTAR";
};

/* PINCTRL - modifications to sc7180-trogdor.dtsi */

&en_pp3300_dx_edp {
	pinmux {
		pins = "gpio67";
	};

	pinconf {
		pins = "gpio67";
	};
};

&sec_mi2s_active{
	pinmux {
		pins = "gpio49", "gpio50", "gpio51", "gpio52";
		function = "mi2s_1";
	};
};

&ts_reset_l {
	pinconf {
		/*
		 * We want reset state by default and it will be up to the
		 * driver to disable this when it's ready.
		 */
		output-low;
	};
};

/* PINCTRL - board-specific pinctrl */

&tlmm {
	gpio-line-names = "HUB_RST_L",
			  "AP_RAM_ID0",
			  "AP_SKU_ID2",
			  "AP_RAM_ID1",
			  "",
			  "AP_RAM_ID2",
			  "UF_CAM_EN",
			  "WF_CAM_EN",
			  "TS_RESET_L",
			  "TS_INT_L",
			  "",
			  "EDP_BRIJ_IRQ",
			  "AP_EDP_BKLTEN",
			  "UF_CAM_MCLK",
			  "WF_CAM_CLK",
			  "EDP_BRIJ_I2C_SDA",
			  "EDP_BRIJ_I2C_SCL",
			  "UF_CAM_SDA",
			  "UF_CAM_SCL",
			  "WF_CAM_SDA",
			  "WF_CAM_SCL",
			  "AVEE_LCD_EN",
			  "",
			  "AMP_EN",
			  "AMP_EN2",
			  "AP_SAR_SENSOR_SDA",
			  "AP_SAR_SENSOR_SCL",
			  "SEL_LCM",
			  "HP_IRQ",
			  "WF_CAM_RST_L",
			  "UF_CAM_RST_L",
			  "AP_BRD_ID2",
			  "BRIJ_SUSPEND",
			  "AP_BRD_ID0",
			  "AP_H1_SPI_MISO",
			  "AP_H1_SPI_MOSI",
			  "AP_H1_SPI_CLK",
			  "AP_H1_SPI_CS_L",
			  "BT_UART_CTS",
			  "BT_UART_RTS",
			  "BT_UART_TXD",
			  "BT_UART_RXD",
			  "H1_AP_INT_ODL",
			  "",
			  "UART_AP_TX_DBG_RX",
			  "UART_DBG_TX_AP_RX",
			  "HP_I2C_SDA",
			  "HP_I2C_SCL",
			  "FORCED_USB_BOOT",
			  "AMP_BCLK",
			  "AMP_LRCLK",
			  "AMP_DIN",
			  "AMP_DIN_2",
			  "HP_BCLK",
			  "HP_LRCLK",
			  "HP_DOUT",
			  "HP_DIN",
			  "HP_MCLK",
			  "AP_SKU_ID0",
			  "AP_EC_SPI_MISO",
			  "AP_EC_SPI_MOSI",
			  "AP_EC_SPI_CLK",
			  "AP_EC_SPI_CS_L",
			  "AP_SPI_CLK",
			  "AP_SPI_MOSI",
			  "AP_SPI_MISO",
			  /*
			   * AP_FLASH_WP_L is crossystem ABI. Schematics
			   * call it BIOS_FLASH_WP_L.
			   */
			  "AP_FLASH_WP_L",
			  "EN_PP3300_DX_EDP",
			  "AP_SPI_CS0_L",
			  "SD_CD_ODL",
			  "",
			  "",
			  "",
			  "WLAN_SW_CTRL",
			  "",
			  "REPORT_E",
			  "VDD_RESET_1.8V",
			  "ID0",
			  "",
			  "ID1",
			  "AVDD_LCD_EN",
			  "MIPI_1.8V_EN",
			  "",
			  "CODEC_PWR_EN",
			  "HUB_EN",
			  "",
			  "PP1800_MIPI_SW_EN",
			  "EN_PP3300_TOUCH",
			  "",
			  "",
			  "AP_SKU_ID1",
			  "AP_RST_REQ",
			  "",
			  "AP_BRD_ID1",
			  "AP_EC_INT_L",
			  "SDM_GRFC_3",
			  "",
			  "",
			  "BOOT_CONFIG_4",
			  "BOOT_CONFIG_2",
			  "",
			  "",
			  "",
			  "",
			  "EDP_BRIJ_EN",
			  "",
			  "",
			  "BOOT_CONFIG_3",
			  "WCI2_LTE_COEX_TXD",
			  "WCI2_LTE_COEX_RXD",
			  "",
			  "",
			  "",
			  "",
			  "FORCED_USB_BOOT_POL",
			  "AP_TS_PEN_I2C_SDA",
			  "AP_TS_PEN_I2C_SCL",
			  "DP_HOT_PLUG_DET",
			  "EC_IN_RW_ODL";

	en_pp3300_touch: en-pp3300-touch {
		pinmux {
			pins = "gpio87";
			function = "gpio";
		};

		pinconf {
			pins = "gpio87";
			drive-strength = <2>;
			bias-disable;
		};
	};
};
Commit	Line	Data
be0416a3 MK	1	// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
	2	/*
	3	* Google Homestar board device tree source
	4	*
	5	* Copyright 2021 Google LLC.
	6	*/
	7
372b2aee	8	/* This file must be included after sc7180-trogdor.dtsi */
be0416a3 MK	9
	10	/ {
	11	/* BOARD-SPECIFIC TOP LEVEL NODES */
	12
	13	max98360a_1: max98360a_1 {
	14	compatible = "maxim,max98360a";
	15	#sound-dai-cells = <0>;
	16	};
	17
	18	max98360a_2: max98360a_2 {
	19	compatible = "maxim,max98360a";
	20	#sound-dai-cells = <0>;
	21	};
	22
	23	max98360a_3: max98360a_3 {
	24	compatible = "maxim,max98360a";
	25	#sound-dai-cells = <0>;
	26	};
	27
	28	pp3300_touch: pp3300-touch {
	29	compatible = "regulator-fixed";
	30	regulator-name = "pp3300_touch";
	31
	32	regulator-min-microvolt = <3300000>;
	33	regulator-max-microvolt = <3300000>;
	34
	35	gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>;
	36	enable-active-high;
	37	pinctrl-names = "default";
	38	pinctrl-0 = <&en_pp3300_touch>;
	39
	40	vin-supply = <&pp3300_a>;
	41	};
	42
	43	thermal-zones {
	44	skin_temp_thermal: skin-temp-thermal {
	45	polling-delay-passive = <250>;
	46	polling-delay = <0>;
	47
	48	thermal-sensors = <&pm6150_adc_tm 1>;
be4c096e	49	sustainable-power = <965>;
be0416a3 MK	50
	51	trips {
	52	skin_temp_alert0: trip-point0 {
	53	temperature = <55000>;
	54	hysteresis = <1000>;
	55	type = "passive";
	56	};
	57
	58	skin_temp_alert1: trip-point1 {
	59	temperature = <58000>;
	60	hysteresis = <1000>;
	61	type = "passive";
	62	};
	63
	64	skin-temp-crit {
	65	temperature = <73000>;
	66	hysteresis = <1000>;
	67	type = "critical";
	68	};
	69	};
	70
	71	cooling-maps {
	72	map0 {
	73	trip = <&skin_temp_alert0>;
	74	cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
	75	<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
	76	};
	77
	78	map1 {
	79	trip = <&skin_temp_alert1>;
	80	cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
	81	<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
	82	};
	83	};
	84	};
	85	};
	86	};
	87
be0416a3 MK	88	ap_ts_pen_1v8: &i2c4 {
	89	status = "okay";
	90	clock-frequency = <400000>;
	91
	92	ap_ts: touchscreen@14 {
	93	compatible = "goodix,gt7375p";
	94	reg = <0x14>;
	95	pinctrl-names = "default";
	96	pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
	97
	98	interrupt-parent = <&tlmm>;
	99	interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
	100
	101	reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
	102
	103	vdd-supply = <&pp3300_touch>;
	104	};
	105	};
	106
	107	/* Panel controls backlight over aux channel */
	108
	109	&backlight {
	110	status = "disabled";
	111	};
	112
	113	&camcc {
	114	status = "okay";
	115	};
	116
	117	&panel {
	118	compatible = "samsung,atna33xc20";
	119	enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
	120	/delete-property/ backlight;
	121	};
	122
	123	&pm6150_adc {
	124	skin-temp-thermistor@4d {
	125	reg = <ADC5_AMUX_THM1_100K_PU>;
	126	qcom,ratiometric;
	127	qcom,hw-settle-time = <200>;
	128	};
	129	};
	130
	131	&pm6150_adc_tm {
	132	status = "okay";
	133
	134	skin-temp-thermistor@1 {
	135	reg = <1>;
	136	io-channels = <&pm6150_adc ADC5_AMUX_THM1_100K_PU>;
	137	qcom,ratiometric;
	138	qcom,hw-settle-time-us = <200>;
	139	};
	140	};
	141
bb59462e SB	142	&pp1800_uf_cam {
	143	status = "okay";
	144	};
	145
	146	&pp1800_wf_cam {
	147	status = "okay";
	148	};
	149
	150	&pp2800_uf_cam {
	151	status = "okay";
	152	};
	153
	154	&pp2800_wf_cam {
	155	status = "okay";
	156	};
	157
be0416a3 MK	158	&pp3300_dx_edp {
	159	gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
	160	};
	161
	162	&secondary_mi2s {
	163	qcom,playback-sd-lines = <0 1>;
	164	};
	165
	166	&sound_multimedia1_codec {
	167	sound-dai = <&max98360a>, <&max98360a_1>, <&max98360a_2>, <&max98360a_3> ;
	168	};
	169
	170	&wifi {
	171	qcom,ath10k-calibration-variant = "GO_HOMESTAR";
	172	};
	173
	174	/* PINCTRL - modifications to sc7180-trogdor.dtsi */
	175
	176	&en_pp3300_dx_edp {
	177	pinmux {
	178	pins = "gpio67";
	179	};
	180
	181	pinconf {
	182	pins = "gpio67";
	183	};
	184	};
	185
	186	&sec_mi2s_active{
	187	pinmux {
	188	pins = "gpio49", "gpio50", "gpio51", "gpio52";
	189	function = "mi2s_1";
	190	};
	191	};
	192
	193	&ts_reset_l {
	194	pinconf {
	195	/*
	196	* We want reset state by default and it will be up to the
	197	* driver to disable this when it's ready.
	198	*/
	199	output-low;
	200	};
	201	};
	202
	203	/* PINCTRL - board-specific pinctrl */
	204
	205	&tlmm {
	206	gpio-line-names = "HUB_RST_L",
	207	"AP_RAM_ID0",
	208	"AP_SKU_ID2",
	209	"AP_RAM_ID1",
	210	"",
	211	"AP_RAM_ID2",
	212	"UF_CAM_EN",
	213	"WF_CAM_EN",
	214	"TS_RESET_L",
	215	"TS_INT_L",
	216	"",
	217	"EDP_BRIJ_IRQ",
	218	"AP_EDP_BKLTEN",
	219	"UF_CAM_MCLK",
	220	"WF_CAM_CLK",
	221	"EDP_BRIJ_I2C_SDA",
222	"EDP_BRIJ_I2C_SCL",
223	"UF_CAM_SDA",
224	"UF_CAM_SCL",
225	"WF_CAM_SDA",
226	"WF_CAM_SCL",
227	"AVEE_LCD_EN",
228	"",
229	"AMP_EN",
230	"AMP_EN2",
231	"AP_SAR_SENSOR_SDA",
232	"AP_SAR_SENSOR_SCL",
233	"SEL_LCM",
234	"HP_IRQ",
235	"WF_CAM_RST_L",
236	"UF_CAM_RST_L",
237	"AP_BRD_ID2",
238	"BRIJ_SUSPEND",
239	"AP_BRD_ID0",
240	"AP_H1_SPI_MISO",
241	"AP_H1_SPI_MOSI",
242	"AP_H1_SPI_CLK",
243	"AP_H1_SPI_CS_L",
244	"BT_UART_CTS",
245	"BT_UART_RTS",
246	"BT_UART_TXD",
247	"BT_UART_RXD",
248	"H1_AP_INT_ODL",
249	"",
250	"UART_AP_TX_DBG_RX",
251	"UART_DBG_TX_AP_RX",
252	"HP_I2C_SDA",
253	"HP_I2C_SCL",
254	"FORCED_USB_BOOT",
255	"AMP_BCLK",
256	"AMP_LRCLK",
257	"AMP_DIN",
258	"AMP_DIN_2",
259	"HP_BCLK",
260	"HP_LRCLK",
261	"HP_DOUT",
262	"HP_DIN",
263	"HP_MCLK",
264	"AP_SKU_ID0",
265	"AP_EC_SPI_MISO",
266	"AP_EC_SPI_MOSI",
267	"AP_EC_SPI_CLK",
268	"AP_EC_SPI_CS_L",
269	"AP_SPI_CLK",
270	"AP_SPI_MOSI",
271	"AP_SPI_MISO",
272	/*
273	* AP_FLASH_WP_L is crossystem ABI. Schematics
274	* call it BIOS_FLASH_WP_L.
275	*/
276	"AP_FLASH_WP_L",
277	"EN_PP3300_DX_EDP",
278	"AP_SPI_CS0_L",
279	"SD_CD_ODL",
280	"",
281	"",
282	"",
283	"WLAN_SW_CTRL",
284	"",
285	"REPORT_E",
286	"VDD_RESET_1.8V",
287	"ID0",
288	"",
289	"ID1",
290	"AVDD_LCD_EN",
291	"MIPI_1.8V_EN",
292	"",
293	"CODEC_PWR_EN",
294	"HUB_EN",
295	"",
296	"PP1800_MIPI_SW_EN",
297	"EN_PP3300_TOUCH",
298	"",
299	"",
300	"AP_SKU_ID1",
301	"AP_RST_REQ",
302	"",
303	"AP_BRD_ID1",
304	"AP_EC_INT_L",
305	"SDM_GRFC_3",
306	"",
307	"",
308	"BOOT_CONFIG_4",
309	"BOOT_CONFIG_2",
310	"",
311	"",
312	"",
313	"",
314	"EDP_BRIJ_EN",
315	"",
316	"",
317	"BOOT_CONFIG_3",
318	"WCI2_LTE_COEX_TXD",
319	"WCI2_LTE_COEX_RXD",
320	"",
321	"",
322	"",
323	"",
324	"FORCED_USB_BOOT_POL",
325	"AP_TS_PEN_I2C_SDA",
326	"AP_TS_PEN_I2C_SCL",
327	"DP_HOT_PLUG_DET",
328	"EC_IN_RW_ODL";
329
330	en_pp3300_touch: en-pp3300-touch {
331	pinmux {
332	pins = "gpio87";
333	function = "gpio";
334	};
335
336	pinconf {
337	pins = "gpio87";
338	drive-strength = <2>;
339	bias-disable;
340	};
341	};
342	};