Commit | Line | Data |
---|---|---|
23bdf86a LB |
1 | /* |
2 | * linux/arch/arm/mm/proc-xsc3.S | |
3 | * | |
4 | * Original Author: Matthew Gilbert | |
5 | * Current Maintainer: Deepak Saxena <dsaxena@plexity.net> | |
6 | * | |
7 | * Copyright 2004 (C) Intel Corp. | |
8 | * Copyright 2005 (c) MontaVista Software, Inc. | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or modify | |
11 | * it under the terms of the GNU General Public License version 2 as | |
12 | * published by the Free Software Foundation. | |
13 | * | |
14 | * MMU functions for the Intel XScale3 Core (XSC3). The XSC3 core is an | |
15 | * extension to Intel's original XScale core that adds the following | |
16 | * features: | |
17 | * | |
18 | * - ARMv6 Supersections | |
19 | * - Low Locality Reference pages (replaces mini-cache) | |
20 | * - 36-bit addressing | |
21 | * - L2 cache | |
22 | * - Cache-coherency if chipset supports it | |
23 | * | |
24 | * Based on orignal XScale code by Nicolas Pitre | |
25 | */ | |
26 | ||
27 | #include <linux/linkage.h> | |
28 | #include <linux/init.h> | |
29 | #include <asm/assembler.h> | |
ee90dabc | 30 | #include <asm/elf.h> |
23bdf86a LB |
31 | #include <asm/hardware.h> |
32 | #include <asm/pgtable.h> | |
b48340af | 33 | #include <asm/pgtable-hwdef.h> |
23bdf86a LB |
34 | #include <asm/page.h> |
35 | #include <asm/ptrace.h> | |
36 | #include "proc-macros.S" | |
37 | ||
38 | /* | |
39 | * This is the maximum size of an area which will be flushed. If the | |
40 | * area is larger than this, then we flush the whole cache. | |
41 | */ | |
42 | #define MAX_AREA_SIZE 32768 | |
43 | ||
44 | /* | |
45 | * The cache line size of the I and D cache. | |
46 | */ | |
47 | #define CACHELINESIZE 32 | |
48 | ||
49 | /* | |
50 | * The size of the data cache. | |
51 | */ | |
52 | #define CACHESIZE 32768 | |
53 | ||
54 | /* | |
55 | * Run with L2 enabled. | |
56 | */ | |
57 | #define L2_CACHE_ENABLE 1 | |
58 | ||
23bdf86a LB |
59 | /* |
60 | * This macro is used to wait for a CP15 write and is needed | |
61 | * when we have to ensure that the last operation to the co-pro | |
62 | * was completed before continuing with operation. | |
63 | */ | |
64 | .macro cpwait_ret, lr, rd | |
65 | mrc p15, 0, \rd, c2, c0, 0 @ arbitrary read of cp15 | |
66 | sub pc, \lr, \rd, LSR #32 @ wait for completion and | |
67 | @ flush instruction pipeline | |
68 | .endm | |
69 | ||
70 | /* | |
71 | * This macro cleans & invalidates the entire xsc3 dcache by set & way. | |
72 | */ | |
73 | ||
74 | .macro clean_d_cache rd, rs | |
75 | mov \rd, #0x1f00 | |
76 | orr \rd, \rd, #0x00e0 | |
77 | 1: mcr p15, 0, \rd, c7, c14, 2 @ clean/inv set/way | |
78 | adds \rd, \rd, #0x40000000 | |
79 | bcc 1b | |
80 | subs \rd, \rd, #0x20 | |
81 | bpl 1b | |
82 | .endm | |
83 | ||
84 | .text | |
85 | ||
86 | /* | |
87 | * cpu_xsc3_proc_init() | |
88 | * | |
89 | * Nothing too exciting at the moment | |
90 | */ | |
91 | ENTRY(cpu_xsc3_proc_init) | |
92 | mov pc, lr | |
93 | ||
94 | /* | |
95 | * cpu_xsc3_proc_fin() | |
96 | */ | |
97 | ENTRY(cpu_xsc3_proc_fin) | |
98 | str lr, [sp, #-4]! | |
99 | mov r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE | |
100 | msr cpsr_c, r0 | |
101 | bl xsc3_flush_kern_cache_all @ clean caches | |
102 | mrc p15, 0, r0, c1, c0, 0 @ ctrl register | |
103 | bic r0, r0, #0x1800 @ ...IZ........... | |
104 | bic r0, r0, #0x0006 @ .............CA. | |
105 | mcr p15, 0, r0, c1, c0, 0 @ disable caches | |
106 | ldr pc, [sp], #4 | |
107 | ||
108 | /* | |
109 | * cpu_xsc3_reset(loc) | |
110 | * | |
111 | * Perform a soft reset of the system. Put the CPU into the | |
112 | * same state as it would be if it had been reset, and branch | |
113 | * to what would be the reset vector. | |
114 | * | |
115 | * loc: location to jump to for soft reset | |
116 | */ | |
117 | .align 5 | |
118 | ENTRY(cpu_xsc3_reset) | |
119 | mov r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE | |
120 | msr cpsr_c, r1 @ reset CPSR | |
121 | mrc p15, 0, r1, c1, c0, 0 @ ctrl register | |
122 | bic r1, r1, #0x0086 @ ........B....CA. | |
123 | bic r1, r1, #0x3900 @ ..VIZ..S........ | |
124 | mcr p15, 0, r1, c1, c0, 0 @ ctrl register | |
125 | mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches & BTB | |
126 | bic r1, r1, #0x0001 @ ...............M | |
127 | mcr p15, 0, r1, c1, c0, 0 @ ctrl register | |
128 | @ CAUTION: MMU turned off from this point. We count on the pipeline | |
129 | @ already containing those two last instructions to survive. | |
130 | mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs | |
131 | mov pc, r0 | |
132 | ||
133 | /* | |
134 | * cpu_xsc3_do_idle() | |
135 | * | |
136 | * Cause the processor to idle | |
137 | * | |
138 | * For now we do nothing but go to idle mode for every case | |
139 | * | |
140 | * XScale supports clock switching, but using idle mode support | |
141 | * allows external hardware to react to system state changes. | |
142 | ||
143 | MMG: Come back to this one. | |
144 | */ | |
145 | .align 5 | |
146 | ||
147 | ENTRY(cpu_xsc3_do_idle) | |
148 | mov r0, #1 | |
149 | mcr p14, 0, r0, c7, c0, 0 @ Go to IDLE | |
150 | mov pc, lr | |
151 | ||
152 | /* ================================= CACHE ================================ */ | |
153 | ||
154 | /* | |
155 | * flush_user_cache_all() | |
156 | * | |
157 | * Invalidate all cache entries in a particular address | |
158 | * space. | |
159 | */ | |
160 | ENTRY(xsc3_flush_user_cache_all) | |
161 | /* FALLTHROUGH */ | |
162 | ||
163 | /* | |
164 | * flush_kern_cache_all() | |
165 | * | |
166 | * Clean and invalidate the entire cache. | |
167 | */ | |
168 | ENTRY(xsc3_flush_kern_cache_all) | |
169 | mov r2, #VM_EXEC | |
170 | mov ip, #0 | |
171 | __flush_whole_cache: | |
172 | clean_d_cache r0, r1 | |
173 | tst r2, #VM_EXEC | |
174 | mcrne p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB | |
175 | mcrne p15, 0, ip, c7, c10, 4 @ Drain Write Buffer | |
176 | mcrne p15, 0, ip, c7, c5, 4 @ Prefetch Flush | |
177 | mov pc, lr | |
178 | ||
179 | /* | |
180 | * flush_user_cache_range(start, end, vm_flags) | |
181 | * | |
182 | * Invalidate a range of cache entries in the specified | |
183 | * address space. | |
184 | * | |
185 | * - start - start address (may not be aligned) | |
186 | * - end - end address (exclusive, may not be aligned) | |
187 | * - vma - vma_area_struct describing address space | |
188 | */ | |
189 | .align 5 | |
190 | ENTRY(xsc3_flush_user_cache_range) | |
191 | mov ip, #0 | |
192 | sub r3, r1, r0 @ calculate total size | |
193 | cmp r3, #MAX_AREA_SIZE | |
194 | bhs __flush_whole_cache | |
195 | ||
196 | 1: tst r2, #VM_EXEC | |
197 | mcrne p15, 0, r0, c7, c5, 1 @ Invalidate I cache line | |
198 | mcr p15, 0, r0, c7, c14, 1 @ Clean/invalidate D cache line | |
199 | add r0, r0, #CACHELINESIZE | |
200 | cmp r0, r1 | |
201 | blo 1b | |
202 | tst r2, #VM_EXEC | |
203 | mcrne p15, 0, ip, c7, c5, 6 @ Invalidate BTB | |
204 | mcrne p15, 0, ip, c7, c10, 4 @ Drain Write Buffer | |
205 | mcrne p15, 0, ip, c7, c5, 4 @ Prefetch Flush | |
206 | mov pc, lr | |
207 | ||
208 | /* | |
209 | * coherent_kern_range(start, end) | |
210 | * | |
211 | * Ensure coherency between the Icache and the Dcache in the | |
212 | * region described by start. If you have non-snooping | |
213 | * Harvard caches, you need to implement this function. | |
214 | * | |
215 | * - start - virtual start address | |
216 | * - end - virtual end address | |
217 | * | |
218 | * Note: single I-cache line invalidation isn't used here since | |
219 | * it also trashes the mini I-cache used by JTAG debuggers. | |
220 | */ | |
221 | ENTRY(xsc3_coherent_kern_range) | |
222 | /* FALLTHROUGH */ | |
223 | ENTRY(xsc3_coherent_user_range) | |
224 | bic r0, r0, #CACHELINESIZE - 1 | |
225 | 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry | |
226 | add r0, r0, #CACHELINESIZE | |
227 | cmp r0, r1 | |
228 | blo 1b | |
229 | mov r0, #0 | |
230 | mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB | |
231 | mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer | |
232 | mcr p15, 0, r0, c7, c5, 4 @ Prefetch Flush | |
233 | mov pc, lr | |
234 | ||
235 | /* | |
236 | * flush_kern_dcache_page(void *page) | |
237 | * | |
238 | * Ensure no D cache aliasing occurs, either with itself or | |
239 | * the I cache | |
240 | * | |
241 | * - addr - page aligned address | |
242 | */ | |
243 | ENTRY(xsc3_flush_kern_dcache_page) | |
244 | add r1, r0, #PAGE_SZ | |
245 | 1: mcr p15, 0, r0, c7, c14, 1 @ Clean/Invalidate D Cache line | |
246 | add r0, r0, #CACHELINESIZE | |
247 | cmp r0, r1 | |
248 | blo 1b | |
249 | mov r0, #0 | |
250 | mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB | |
251 | mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer | |
252 | mcr p15, 0, r0, c7, c5, 4 @ Prefetch Flush | |
253 | mov pc, lr | |
254 | ||
255 | /* | |
256 | * dma_inv_range(start, end) | |
257 | * | |
258 | * Invalidate (discard) the specified virtual address range. | |
259 | * May not write back any entries. If 'start' or 'end' | |
260 | * are not cache line aligned, those lines must be written | |
261 | * back. | |
262 | * | |
263 | * - start - virtual start address | |
264 | * - end - virtual end address | |
265 | */ | |
266 | ENTRY(xsc3_dma_inv_range) | |
267 | tst r0, #CACHELINESIZE - 1 | |
268 | bic r0, r0, #CACHELINESIZE - 1 | |
269 | mcrne p15, 0, r0, c7, c10, 1 @ clean L1 D entry | |
270 | mcrne p15, 1, r0, c7, c11, 1 @ clean L2 D entry | |
271 | tst r1, #CACHELINESIZE - 1 | |
272 | mcrne p15, 0, r1, c7, c10, 1 @ clean L1 D entry | |
273 | mcrne p15, 1, r1, c7, c11, 1 @ clean L2 D entry | |
274 | 1: mcr p15, 0, r0, c7, c6, 1 @ invalidate L1 D entry | |
275 | mcr p15, 1, r0, c7, c7, 1 @ Invalidate L2 D cache line | |
276 | add r0, r0, #CACHELINESIZE | |
277 | cmp r0, r1 | |
278 | blo 1b | |
279 | mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer | |
280 | mov pc, lr | |
281 | ||
282 | /* | |
283 | * dma_clean_range(start, end) | |
284 | * | |
285 | * Clean the specified virtual address range. | |
286 | * | |
287 | * - start - virtual start address | |
288 | * - end - virtual end address | |
289 | */ | |
290 | ENTRY(xsc3_dma_clean_range) | |
291 | bic r0, r0, #CACHELINESIZE - 1 | |
292 | 1: mcr p15, 0, r0, c7, c10, 1 @ clean L1 D entry | |
293 | mcr p15, 1, r0, c7, c11, 1 @ clean L2 D entry | |
294 | add r0, r0, #CACHELINESIZE | |
295 | cmp r0, r1 | |
296 | blo 1b | |
297 | mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer | |
298 | mov pc, lr | |
299 | ||
300 | /* | |
301 | * dma_flush_range(start, end) | |
302 | * | |
303 | * Clean and invalidate the specified virtual address range. | |
304 | * | |
305 | * - start - virtual start address | |
306 | * - end - virtual end address | |
307 | */ | |
308 | ENTRY(xsc3_dma_flush_range) | |
309 | bic r0, r0, #CACHELINESIZE - 1 | |
310 | 1: mcr p15, 0, r0, c7, c14, 1 @ Clean/invalidate L1 D cache line | |
311 | mcr p15, 1, r0, c7, c11, 1 @ Clean L2 D cache line | |
312 | mcr p15, 1, r0, c7, c7, 1 @ Invalidate L2 D cache line | |
313 | add r0, r0, #CACHELINESIZE | |
314 | cmp r0, r1 | |
315 | blo 1b | |
316 | mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer | |
317 | mov pc, lr | |
318 | ||
319 | ENTRY(xsc3_cache_fns) | |
320 | .long xsc3_flush_kern_cache_all | |
321 | .long xsc3_flush_user_cache_all | |
322 | .long xsc3_flush_user_cache_range | |
323 | .long xsc3_coherent_kern_range | |
324 | .long xsc3_coherent_user_range | |
325 | .long xsc3_flush_kern_dcache_page | |
326 | .long xsc3_dma_inv_range | |
327 | .long xsc3_dma_clean_range | |
328 | .long xsc3_dma_flush_range | |
329 | ||
330 | ENTRY(cpu_xsc3_dcache_clean_area) | |
331 | 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry | |
332 | add r0, r0, #CACHELINESIZE | |
333 | subs r1, r1, #CACHELINESIZE | |
334 | bhi 1b | |
335 | mov pc, lr | |
336 | ||
337 | /* =============================== PageTable ============================== */ | |
338 | ||
339 | /* | |
340 | * cpu_xsc3_switch_mm(pgd) | |
341 | * | |
342 | * Set the translation base pointer to be as described by pgd. | |
343 | * | |
344 | * pgd: new page tables | |
345 | */ | |
346 | .align 5 | |
347 | ENTRY(cpu_xsc3_switch_mm) | |
348 | clean_d_cache r1, r2 | |
349 | mcr p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB | |
350 | mcr p15, 0, ip, c7, c10, 4 @ Drain Write Buffer | |
351 | mcr p15, 0, ip, c7, c5, 4 @ Prefetch Flush | |
352 | #ifdef L2_CACHE_ENABLE | |
353 | orr r0, r0, #0x18 @ cache the page table in L2 | |
354 | #endif | |
355 | mcr p15, 0, r0, c2, c0, 0 @ load page table pointer | |
356 | mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs | |
357 | cpwait_ret lr, ip | |
358 | ||
359 | /* | |
ad1ae2fe | 360 | * cpu_xsc3_set_pte_ext(ptep, pte, ext) |
23bdf86a LB |
361 | * |
362 | * Set a PTE and flush it out | |
363 | * | |
364 | */ | |
365 | .align 5 | |
ad1ae2fe | 366 | ENTRY(cpu_xsc3_set_pte_ext) |
23bdf86a LB |
367 | str r1, [r0], #-2048 @ linux version |
368 | ||
0e5fdca7 | 369 | bic r2, r1, #0xff0 @ Keep C, B bits |
23bdf86a | 370 | orr r2, r2, #PTE_TYPE_EXT @ extended page |
0e5fdca7 LB |
371 | tst r1, #L_PTE_SHARED @ Shared? |
372 | orrne r2, r2, #0x200 | |
23bdf86a LB |
373 | |
374 | eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY | |
375 | ||
376 | tst r3, #L_PTE_USER @ User? | |
377 | orrne r2, r2, #PTE_EXT_AP_URO_SRW @ yes -> user r/o, system r/w | |
378 | ||
379 | tst r3, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty? | |
380 | orreq r2, r2, #PTE_EXT_AP_UNO_SRW @ yes -> user n/a, system r/w | |
381 | @ combined with user -> user r/w | |
382 | ||
383 | #if L2_CACHE_ENABLE | |
384 | @ If its cacheable it needs to be in L2 also. | |
385 | eor ip, r1, #L_PTE_CACHEABLE | |
386 | tst ip, #L_PTE_CACHEABLE | |
387 | orreq r2, r2, #PTE_EXT_TEX(0x5) | |
388 | #endif | |
389 | ||
390 | tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young? | |
391 | movne r2, #0 @ no -> fault | |
392 | ||
393 | str r2, [r0] @ hardware version | |
394 | mov ip, #0 | |
395 | mcr p15, 0, r0, c7, c10, 1 @ Clean D cache line mcr | |
396 | mcr p15, 0, ip, c7, c10, 4 @ Drain Write Buffer | |
397 | mov pc, lr | |
398 | ||
399 | .ltorg | |
400 | ||
401 | .align | |
402 | ||
403 | __INIT | |
404 | ||
405 | .type __xsc3_setup, #function | |
406 | __xsc3_setup: | |
407 | mov r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE | |
408 | msr cpsr_c, r0 | |
409 | mcr p15, 0, ip, c7, c7, 0 @ invalidate I, D caches & BTB | |
410 | mcr p15, 0, ip, c7, c10, 4 @ Drain Write Buffer | |
411 | mcr p15, 0, ip, c7, c5, 4 @ Prefetch Flush | |
412 | mcr p15, 0, ip, c8, c7, 0 @ invalidate I, D TLBs | |
413 | #if L2_CACHE_ENABLE | |
414 | orr r4, r4, #0x18 @ cache the page table in L2 | |
415 | #endif | |
416 | mcr p15, 0, r4, c2, c0, 0 @ load page table pointer | |
417 | mov r0, #1 @ Allow access to CP0 and CP13 | |
418 | orr r0, r0, #1 << 13 @ Its undefined whether this | |
419 | mcr p15, 0, r0, c15, c1, 0 @ affects USR or SVC modes | |
420 | mrc p15, 0, r0, c1, c0, 1 @ get auxiliary control reg | |
421 | and r0, r0, #2 @ preserve bit P bit setting | |
422 | #if L2_CACHE_ENABLE | |
423 | orr r0, r0, #(1 << 10) @ enable L2 for LLR cache | |
424 | #endif | |
425 | mcr p15, 0, r0, c1, c0, 1 @ set auxiliary control reg | |
22b19086 RK |
426 | |
427 | adr r5, xsc3_crval | |
428 | ldmia r5, {r5, r6} | |
23bdf86a | 429 | mrc p15, 0, r0, c1, c0, 0 @ get control register |
22b19086 RK |
430 | bic r0, r0, r5 @ .... .... .... ..A. |
431 | orr r0, r0, r6 @ .... .... .... .C.M | |
22b19086 | 432 | orr r0, r0, #0x00000800 @ ..VI Z..S .... .... |
23bdf86a | 433 | #if L2_CACHE_ENABLE |
22b19086 | 434 | orr r0, r0, #0x04000000 @ L2 enable |
23bdf86a LB |
435 | #endif |
436 | mov pc, lr | |
437 | ||
438 | .size __xsc3_setup, . - __xsc3_setup | |
439 | ||
22b19086 RK |
440 | .type xsc3_crval, #object |
441 | xsc3_crval: | |
442 | crval clear=0x04003b02, mmuset=0x00003105, ucset=0x00001100 | |
443 | ||
23bdf86a LB |
444 | __INITDATA |
445 | ||
446 | /* | |
447 | * Purpose : Function pointers used to access above functions - all calls | |
448 | * come through these | |
449 | */ | |
450 | ||
451 | .type xsc3_processor_functions, #object | |
452 | ENTRY(xsc3_processor_functions) | |
453 | .word v5t_early_abort | |
454 | .word cpu_xsc3_proc_init | |
455 | .word cpu_xsc3_proc_fin | |
456 | .word cpu_xsc3_reset | |
457 | .word cpu_xsc3_do_idle | |
458 | .word cpu_xsc3_dcache_clean_area | |
459 | .word cpu_xsc3_switch_mm | |
ad1ae2fe | 460 | .word cpu_xsc3_set_pte_ext |
23bdf86a LB |
461 | .size xsc3_processor_functions, . - xsc3_processor_functions |
462 | ||
463 | .section ".rodata" | |
464 | ||
465 | .type cpu_arch_name, #object | |
466 | cpu_arch_name: | |
467 | .asciz "armv5te" | |
468 | .size cpu_arch_name, . - cpu_arch_name | |
469 | ||
470 | .type cpu_elf_name, #object | |
471 | cpu_elf_name: | |
472 | .asciz "v5" | |
473 | .size cpu_elf_name, . - cpu_elf_name | |
474 | ||
475 | .type cpu_xsc3_name, #object | |
476 | cpu_xsc3_name: | |
477 | .asciz "XScale-Core3" | |
478 | .size cpu_xsc3_name, . - cpu_xsc3_name | |
479 | ||
480 | .align | |
481 | ||
482 | .section ".proc.info.init", #alloc, #execinstr | |
483 | ||
484 | .type __xsc3_proc_info,#object | |
485 | __xsc3_proc_info: | |
486 | .long 0x69056000 | |
487 | .long 0xffffe000 | |
8799ee9f RK |
488 | .long PMD_TYPE_SECT | \ |
489 | PMD_SECT_BUFFERABLE | \ | |
490 | PMD_SECT_CACHEABLE | \ | |
491 | PMD_SECT_AP_WRITE | \ | |
492 | PMD_SECT_AP_READ | |
493 | .long PMD_TYPE_SECT | \ | |
494 | PMD_SECT_AP_WRITE | \ | |
495 | PMD_SECT_AP_READ | |
23bdf86a LB |
496 | b __xsc3_setup |
497 | .long cpu_arch_name | |
498 | .long cpu_elf_name | |
499 | .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP | |
500 | .long cpu_xsc3_name | |
501 | .long xsc3_processor_functions | |
502 | .long v4wbi_tlb_fns | |
503 | .long xsc3_mc_user_fns | |
504 | .long xsc3_cache_fns | |
505 | .size __xsc3_proc_info, . - __xsc3_proc_info |