[linux-2.6-block.git] / arch / arm / mm / proc-arm6_7.S

/*
 *  linux/arch/arm/mm/proc-arm6,7.S
 *
 *  Copyright (C) 1997-2000 Russell King
 *  hacked for non-paged-MM by Hyok S. Choi, 2003.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 *  These are the low level assembler for performing cache and TLB
 *  functions on the ARM610 & ARM710.
 */
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
#include <asm/elf.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/ptrace.h>

ENTRY(cpu_arm6_dcache_clean_area)
ENTRY(cpu_arm7_dcache_clean_area)
		mov	pc, lr

/*
 * Function: arm6_7_data_abort ()
 *
 * Params  : r2 = address of aborted instruction
 *	   : sp = pointer to registers
 *
 * Purpose : obtain information about current aborted instruction
 *
 * Returns : r0 = address of abort
 *	   : r1 = FSR
 */

ENTRY(cpu_arm7_data_abort)
	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
	ldr	r8, [r0]			@ read arm instruction
	tst	r8, #1 << 20			@ L = 0 -> write?
	orreq	r1, r1, #1 << 11		@ yes.
	and	r7, r8, #15 << 24
	add	pc, pc, r7, lsr #22		@ Now branch to the relevant processing routine
	nop

/* 0 */	b	.data_unknown
/* 1 */	mov	pc, lr				@ swp
/* 2 */	b	.data_unknown
/* 3 */	b	.data_unknown
/* 4 */	b	.data_arm_lateldrpostconst	@ ldr	rd, [rn], #m
/* 5 */	b	.data_arm_lateldrpreconst	@ ldr	rd, [rn, #m]
/* 6 */	b	.data_arm_lateldrpostreg	@ ldr	rd, [rn], rm
/* 7 */	b	.data_arm_lateldrprereg		@ ldr	rd, [rn, rm]
/* 8 */	b	.data_arm_ldmstm		@ ldm*a	rn, <rlist>
/* 9 */	b	.data_arm_ldmstm		@ ldm*b	rn, <rlist>
/* a */	b	.data_unknown
/* b */	b	.data_unknown
/* c */	mov	pc, lr				@ ldc	rd, [rn], #m	@ Same as ldr	rd, [rn], #m
/* d */	mov	pc, lr				@ ldc	rd, [rn, #m]
/* e */	b	.data_unknown
/* f */
.data_unknown:	@ Part of jumptable
	mov	r0, r2
	mov	r1, r8
	mov	r2, sp
	bl	baddataabort
	b	ret_from_exception

ENTRY(cpu_arm6_data_abort)
	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
	ldr	r8, [r2]			@ read arm instruction
	tst	r8, #1 << 20			@ L = 0 -> write?
	orreq	r1, r1, #1 << 11		@ yes.
	and	r7, r8, #14 << 24
	teq	r7, #8 << 24			@ was it ldm/stm
	movne	pc, lr

.data_arm_ldmstm:
	tst	r8, #1 << 21			@ check writeback bit
	moveq	pc, lr				@ no writeback -> no fixup
	mov	r7, #0x11
	orr	r7, r7, #0x1100
	and	r6, r8, r7
	and	r2, r8, r7, lsl #1
	add	r6, r6, r2, lsr #1
	and	r2, r8, r7, lsl #2
	add	r6, r6, r2, lsr #2
	and	r2, r8, r7, lsl #3
	add	r6, r6, r2, lsr #3
	add	r6, r6, r6, lsr #8
	add	r6, r6, r6, lsr #4
	and	r6, r6, #15			@ r6 = no. of registers to transfer.
	and	r5, r8, #15 << 16		@ Extract 'n' from instruction
	ldr	r7, [sp, r5, lsr #14]		@ Get register 'Rn'
	tst	r8, #1 << 23			@ Check U bit
	subne	r7, r7, r6, lsl #2		@ Undo increment
	addeq	r7, r7, r6, lsl #2		@ Undo decrement
	str	r7, [sp, r5, lsr #14]		@ Put register 'Rn'
	mov	pc, lr

.data_arm_apply_r6_and_rn:
	and	r5, r8, #15 << 16		@ Extract 'n' from instruction
	ldr	r7, [sp, r5, lsr #14]		@ Get register 'Rn'
	tst	r8, #1 << 23			@ Check U bit
	subne	r7, r7, r6			@ Undo incrmenet
	addeq	r7, r7, r6			@ Undo decrement
	str	r7, [sp, r5, lsr #14]		@ Put register 'Rn'
	mov	pc, lr

.data_arm_lateldrpreconst:
	tst	r8, #1 << 21			@ check writeback bit
	moveq	pc, lr				@ no writeback -> no fixup
.data_arm_lateldrpostconst:
	movs	r2, r8, lsl #20			@ Get offset
	moveq	pc, lr				@ zero -> no fixup
	and	r5, r8, #15 << 16		@ Extract 'n' from instruction
	ldr	r7, [sp, r5, lsr #14]		@ Get register 'Rn'
	tst	r8, #1 << 23			@ Check U bit
	subne	r7, r7, r2, lsr #20		@ Undo increment
	addeq	r7, r7, r2, lsr #20		@ Undo decrement
	str	r7, [sp, r5, lsr #14]		@ Put register 'Rn'
	mov	pc, lr

.data_arm_lateldrprereg:
	tst	r8, #1 << 21			@ check writeback bit
	moveq	pc, lr				@ no writeback -> no fixup
.data_arm_lateldrpostreg:
	and	r7, r8, #15			@ Extract 'm' from instruction
	ldr	r6, [sp, r7, lsl #2]		@ Get register 'Rm'
	mov	r5, r8, lsr #7			@ get shift count
	ands	r5, r5, #31
	and	r7, r8, #0x70			@ get shift type
	orreq	r7, r7, #8			@ shift count = 0
	add	pc, pc, r7
	nop

	mov	r6, r6, lsl r5			@ 0: LSL #!0
	b	.data_arm_apply_r6_and_rn
	b	.data_arm_apply_r6_and_rn	@ 1: LSL #0
	nop
	b	.data_unknown			@ 2: MUL?
	nop
	b	.data_unknown			@ 3: MUL?
	nop
	mov	r6, r6, lsr r5			@ 4: LSR #!0
	b	.data_arm_apply_r6_and_rn
	mov	r6, r6, lsr #32			@ 5: LSR #32
	b	.data_arm_apply_r6_and_rn
	b	.data_unknown			@ 6: MUL?
	nop
	b	.data_unknown			@ 7: MUL?
	nop
	mov	r6, r6, asr r5			@ 8: ASR #!0
	b	.data_arm_apply_r6_and_rn
	mov	r6, r6, asr #32			@ 9: ASR #32
	b	.data_arm_apply_r6_and_rn
	b	.data_unknown			@ A: MUL?
	nop
	b	.data_unknown			@ B: MUL?
	nop
	mov	r6, r6, ror r5			@ C: ROR #!0
	b	.data_arm_apply_r6_and_rn
	mov	r6, r6, rrx			@ D: RRX
	b	.data_arm_apply_r6_and_rn
	b	.data_unknown			@ E: MUL?
	nop
	b	.data_unknown			@ F: MUL?

/*
 * Function: arm6_7_proc_init (void)
 *	   : arm6_7_proc_fin (void)
 *
 * Notes   : This processor does not require these
 */
ENTRY(cpu_arm6_proc_init)
ENTRY(cpu_arm7_proc_init)
		mov	pc, lr

ENTRY(cpu_arm6_proc_fin)
ENTRY(cpu_arm7_proc_fin)
		mov	r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
		msr	cpsr_c, r0
		mov	r0, #0x31			@ ....S..DP...M
		mcr	p15, 0, r0, c1, c0, 0		@ disable caches
		mov	pc, lr

ENTRY(cpu_arm6_do_idle)
ENTRY(cpu_arm7_do_idle)
		mov	pc, lr

/*
 * Function: arm6_7_switch_mm(unsigned long pgd_phys)
 * Params  : pgd_phys	Physical address of page table
 * Purpose : Perform a task switch, saving the old processes state, and restoring
 *	     the new.
 */
ENTRY(cpu_arm6_switch_mm)
ENTRY(cpu_arm7_switch_mm)
#ifdef CONFIG_MMU
		mov	r1, #0
		mcr	p15, 0, r1, c7, c0, 0		@ flush cache
		mcr	p15, 0, r0, c2, c0, 0		@ update page table ptr
		mcr	p15, 0, r1, c5, c0, 0		@ flush TLBs
#endif
		mov	pc, lr

/*
 * Function: arm6_7_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext)
 * Params  : r0 = Address to set
 *	   : r1 = value to set
 * Purpose : Set a PTE and flush it out of any WB cache
 */
		.align	5
ENTRY(cpu_arm6_set_pte_ext)
ENTRY(cpu_arm7_set_pte_ext)
#ifdef CONFIG_MMU
		str	r1, [r0], #-2048		@ linux version

		eor	r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY

		bic	r2, r1, #PTE_SMALL_AP_MASK
		bic	r2, r2, #PTE_TYPE_MASK
		orr	r2, r2, #PTE_TYPE_SMALL

		tst	r1, #L_PTE_USER			@ User?
		orrne	r2, r2, #PTE_SMALL_AP_URO_SRW

		tst	r1, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
		orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW

		tst	r1, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young
		movne	r2, #0

		str	r2, [r0]			@ hardware version
#endif /* CONFIG_MMU */
		mov	pc, lr

/*
 * Function: _arm6_7_reset
 * Params  : r0 = address to jump to
 * Notes   : This sets up everything for a reset
 */
ENTRY(cpu_arm6_reset)
ENTRY(cpu_arm7_reset)
		mov	r1, #0
		mcr	p15, 0, r1, c7, c0, 0		@ flush cache
#ifdef CONFIG_MMU
		mcr	p15, 0, r1, c5, c0, 0		@ flush TLB
#endif
		mov	r1, #0x30
		mcr	p15, 0, r1, c1, c0, 0		@ turn off MMU etc
		mov	pc, r0

		__INIT

		.type	__arm6_setup, #function
__arm6_setup:	mov	r0, #0
		mcr	p15, 0, r0, c7, c0		@ flush caches on v3
#ifdef CONFIG_MMU
		mcr	p15, 0, r0, c5, c0		@ flush TLBs on v3
		mov	r0, #0x3d			@ . ..RS BLDP WCAM
		orr	r0, r0, #0x100			@ . ..01 0011 1101
#else
		mov	r0, #0x3c			@ . ..RS BLDP WCA.
#endif
		mov	pc, lr
		.size	__arm6_setup, . - __arm6_setup

		.type	__arm7_setup, #function
__arm7_setup:	mov	r0, #0
		mcr	p15, 0, r0, c7, c0		@ flush caches on v3
#ifdef CONFIG_MMU
		mcr	p15, 0, r0, c5, c0		@ flush TLBs on v3
		mcr	p15, 0, r0, c3, c0		@ load domain access register
		mov	r0, #0x7d			@ . ..RS BLDP WCAM
		orr	r0, r0, #0x100			@ . ..01 0111 1101
#else
		mov	r0, #0x7c			@ . ..RS BLDP WCA.
#endif
		mov	pc, lr
		.size	__arm7_setup, . - __arm7_setup

		__INITDATA

/*
 * Purpose : Function pointers used to access above functions - all calls
 *	     come through these
 */
		.type	arm6_processor_functions, #object
ENTRY(arm6_processor_functions)
		.word	cpu_arm6_data_abort
		.word	cpu_arm6_proc_init
		.word	cpu_arm6_proc_fin
		.word	cpu_arm6_reset
		.word	cpu_arm6_do_idle
		.word	cpu_arm6_dcache_clean_area
		.word	cpu_arm6_switch_mm
		.word	cpu_arm6_set_pte_ext
		.size	arm6_processor_functions, . - arm6_processor_functions

/*
 * Purpose : Function pointers used to access above functions - all calls
 *	     come through these
 */
		.type	arm7_processor_functions, #object
ENTRY(arm7_processor_functions)
		.word	cpu_arm7_data_abort
		.word	cpu_arm7_proc_init
		.word	cpu_arm7_proc_fin
		.word	cpu_arm7_reset
		.word	cpu_arm7_do_idle
		.word	cpu_arm7_dcache_clean_area
		.word	cpu_arm7_switch_mm
		.word	cpu_arm7_set_pte_ext
		.size	arm7_processor_functions, . - arm7_processor_functions

		.section ".rodata"

		.type	cpu_arch_name, #object
cpu_arch_name:	.asciz	"armv3"
		.size	cpu_arch_name, . - cpu_arch_name

		.type	cpu_elf_name, #object
cpu_elf_name:	.asciz	"v3"
		.size	cpu_elf_name, . - cpu_elf_name

		.type	cpu_arm6_name, #object
cpu_arm6_name:	.asciz	"ARM6"
		.size	cpu_arm6_name, . - cpu_arm6_name

		.type	cpu_arm610_name, #object
cpu_arm610_name:
		.asciz	"ARM610"
		.size	cpu_arm610_name, . - cpu_arm610_name

		.type	cpu_arm7_name, #object
cpu_arm7_name:	.asciz	"ARM7"
		.size	cpu_arm7_name, . - cpu_arm7_name

		.type	cpu_arm710_name, #object
cpu_arm710_name:
		.asciz	"ARM710"
		.size	cpu_arm710_name, . - cpu_arm710_name

		.align

		.section ".proc.info.init", #alloc, #execinstr

		.type	__arm6_proc_info, #object
__arm6_proc_info:
		.long	0x41560600
		.long	0xfffffff0
		.long	0x00000c1e
		.long   PMD_TYPE_SECT | \
			PMD_BIT4 | \
			PMD_SECT_AP_WRITE | \
			PMD_SECT_AP_READ
		b	__arm6_setup
		.long	cpu_arch_name
		.long	cpu_elf_name
		.long	HWCAP_SWP | HWCAP_26BIT
		.long	cpu_arm6_name
		.long	arm6_processor_functions
		.long	v3_tlb_fns
		.long	v3_user_fns
		.long	v3_cache_fns
		.size	__arm6_proc_info, . - __arm6_proc_info

		.type	__arm610_proc_info, #object
__arm610_proc_info:
		.long	0x41560610
		.long	0xfffffff0
		.long	0x00000c1e
		.long   PMD_TYPE_SECT | \
			PMD_BIT4 | \
			PMD_SECT_AP_WRITE | \
			PMD_SECT_AP_READ
		b	__arm6_setup
		.long	cpu_arch_name
		.long	cpu_elf_name
		.long	HWCAP_SWP | HWCAP_26BIT
		.long	cpu_arm610_name
		.long	arm6_processor_functions
		.long	v3_tlb_fns
		.long	v3_user_fns
		.long	v3_cache_fns
		.size	__arm610_proc_info, . - __arm610_proc_info

		.type	__arm7_proc_info, #object
__arm7_proc_info:
		.long	0x41007000
		.long	0xffffff00
		.long	0x00000c1e
		.long   PMD_TYPE_SECT | \
			PMD_BIT4 | \
			PMD_SECT_AP_WRITE | \
			PMD_SECT_AP_READ
		b	__arm7_setup
		.long	cpu_arch_name
		.long	cpu_elf_name
		.long	HWCAP_SWP | HWCAP_26BIT
		.long	cpu_arm7_name
		.long	arm7_processor_functions
		.long	v3_tlb_fns
		.long	v3_user_fns
		.long	v3_cache_fns
		.size	__arm7_proc_info, . - __arm7_proc_info

		.type	__arm710_proc_info, #object
__arm710_proc_info:
		.long	0x41007100
		.long	0xfff8ff00
		.long   PMD_TYPE_SECT | \
			PMD_SECT_BUFFERABLE | \
			PMD_SECT_CACHEABLE | \
			PMD_BIT4 | \
			PMD_SECT_AP_WRITE | \
			PMD_SECT_AP_READ
		.long   PMD_TYPE_SECT | \
			PMD_BIT4 | \
			PMD_SECT_AP_WRITE | \
			PMD_SECT_AP_READ
		b	__arm7_setup
		.long	cpu_arch_name
		.long	cpu_elf_name
		.long	HWCAP_SWP | HWCAP_26BIT
		.long	cpu_arm710_name
		.long	arm7_processor_functions
		.long	v3_tlb_fns
		.long	v3_user_fns
		.long	v3_cache_fns
		.size	__arm710_proc_info, . - __arm710_proc_info
Commit	Line	Data
1da177e4 LT	1	/*
	2	* linux/arch/arm/mm/proc-arm6,7.S
	3	*
	4	* Copyright (C) 1997-2000 Russell King
d090ddda	5	* hacked for non-paged-MM by Hyok S. Choi, 2003.
1da177e4 LT	6	*
	7	* This program is free software; you can redistribute it and/or modify
	8	* it under the terms of the GNU General Public License version 2 as
	9	* published by the Free Software Foundation.
	10	*
	11	* These are the low level assembler for performing cache and TLB
	12	* functions on the ARM610 & ARM710.
	13	*/
	14	#include <linux/linkage.h>
	15	#include <linux/init.h>
	16	#include <asm/assembler.h>
e6ae744d	17	#include <asm/asm-offsets.h>
ee90dabc	18	#include <asm/elf.h>
74945c86	19	#include <asm/pgtable-hwdef.h>
1da177e4	20	#include <asm/pgtable.h>
1da177e4 LT	21	#include <asm/ptrace.h>
	22
	23	ENTRY(cpu_arm6_dcache_clean_area)
	24	ENTRY(cpu_arm7_dcache_clean_area)
	25	mov pc, lr
	26
	27	/*
	28	* Function: arm6_7_data_abort ()
	29	*
	30	* Params : r2 = address of aborted instruction
	31	* : sp = pointer to registers
	32	*
	33	* Purpose : obtain information about current aborted instruction
	34	*
	35	* Returns : r0 = address of abort
	36	* : r1 = FSR
	37	*/
	38
	39	ENTRY(cpu_arm7_data_abort)
	40	mrc p15, 0, r1, c5, c0, 0 @ get FSR
	41	mrc p15, 0, r0, c6, c0, 0 @ get FAR
	42	ldr r8, [r0] @ read arm instruction
ca6ca91d TB	43	tst r8, #1 << 20 @ L = 0 -> write?
ca6ca91d TB	44	orreq r1, r1, #1 << 11 @ yes.
1da177e4 LT	45	and r7, r8, #15 << 24
	46	add pc, pc, r7, lsr #22 @ Now branch to the relevant processing routine
	47	nop
	48
	49	/* 0 */ b .data_unknown
	50	/* 1 */ mov pc, lr @ swp
	51	/* 2 */ b .data_unknown
	52	/* 3 */ b .data_unknown
	53	/* 4 */ b .data_arm_lateldrpostconst @ ldr rd, [rn], #m
	54	/* 5 */ b .data_arm_lateldrpreconst @ ldr rd, [rn, #m]
	55	/* 6 */ b .data_arm_lateldrpostreg @ ldr rd, [rn], rm
	56	/* 7 */ b .data_arm_lateldrprereg @ ldr rd, [rn, rm]
	57	/* 8 / b .data_arm_ldmstm @ ldma rn, <rlist>
	58	/* 9 / b .data_arm_ldmstm @ ldmb rn, <rlist>
	59	/* a */ b .data_unknown
	60	/* b */ b .data_unknown
	61	/* c */ mov pc, lr @ ldc rd, [rn], #m @ Same as ldr rd, [rn], #m
	62	/* d */ mov pc, lr @ ldc rd, [rn, #m]
	63	/* e */ b .data_unknown
	64	/* f */
	65	.data_unknown: @ Part of jumptable
	66	mov r0, r2
	67	mov r1, r8
	68	mov r2, sp
	69	bl baddataabort
	70	b ret_from_exception
	71
	72	ENTRY(cpu_arm6_data_abort)
	73	mrc p15, 0, r1, c5, c0, 0 @ get FSR
	74	mrc p15, 0, r0, c6, c0, 0 @ get FAR
	75	ldr r8, [r2] @ read arm instruction
ca6ca91d TB	76	tst r8, #1 << 20 @ L = 0 -> write?
ca6ca91d TB	77	orreq r1, r1, #1 << 11 @ yes.
1da177e4 LT	78	and r7, r8, #14 << 24
	79	teq r7, #8 << 24 @ was it ldm/stm
	80	movne pc, lr
	81
	82	.data_arm_ldmstm:
	83	tst r8, #1 << 21 @ check writeback bit
	84	moveq pc, lr @ no writeback -> no fixup
	85	mov r7, #0x11
	86	orr r7, r7, #0x1100
	87	and r6, r8, r7
	88	and r2, r8, r7, lsl #1
	89	add r6, r6, r2, lsr #1
	90	and r2, r8, r7, lsl #2
	91	add r6, r6, r2, lsr #2
	92	and r2, r8, r7, lsl #3
	93	add r6, r6, r2, lsr #3
	94	add r6, r6, r6, lsr #8
	95	add r6, r6, r6, lsr #4
	96	and r6, r6, #15 @ r6 = no. of registers to transfer.
	97	and r5, r8, #15 << 16 @ Extract 'n' from instruction
	98	ldr r7, [sp, r5, lsr #14] @ Get register 'Rn'
	99	tst r8, #1 << 23 @ Check U bit
	100	subne r7, r7, r6, lsl #2 @ Undo increment
	101	addeq r7, r7, r6, lsl #2 @ Undo decrement
	102	str r7, [sp, r5, lsr #14] @ Put register 'Rn'
	103	mov pc, lr
	104
	105	.data_arm_apply_r6_and_rn:
	106	and r5, r8, #15 << 16 @ Extract 'n' from instruction
	107	ldr r7, [sp, r5, lsr #14] @ Get register 'Rn'
	108	tst r8, #1 << 23 @ Check U bit
	109	subne r7, r7, r6 @ Undo incrmenet
	110	addeq r7, r7, r6 @ Undo decrement
	111	str r7, [sp, r5, lsr #14] @ Put register 'Rn'
	112	mov pc, lr
	113
	114	.data_arm_lateldrpreconst:
	115	tst r8, #1 << 21 @ check writeback bit
	116	moveq pc, lr @ no writeback -> no fixup
	117	.data_arm_lateldrpostconst:
	118	movs r2, r8, lsl #20 @ Get offset
	119	moveq pc, lr @ zero -> no fixup
	120	and r5, r8, #15 << 16 @ Extract 'n' from instruction
	121	ldr r7, [sp, r5, lsr #14] @ Get register 'Rn'
	122	tst r8, #1 << 23 @ Check U bit
	123	subne r7, r7, r2, lsr #20 @ Undo increment
	124	addeq r7, r7, r2, lsr #20 @ Undo decrement
	125	str r7, [sp, r5, lsr #14] @ Put register 'Rn'
	126	mov pc, lr
	127
	128	.data_arm_lateldrprereg:
	129	tst r8, #1 << 21 @ check writeback bit
	130	moveq pc, lr @ no writeback -> no fixup
	131	.data_arm_lateldrpostreg:
	132	and r7, r8, #15 @ Extract 'm' from instruction
	133	ldr r6, [sp, r7, lsl #2] @ Get register 'Rm'
	134	mov r5, r8, lsr #7 @ get shift count
	135	ands r5, r5, #31
	136	and r7, r8, #0x70 @ get shift type
	137	orreq r7, r7, #8 @ shift count = 0
	138	add pc, pc, r7
	139	nop
	140
	141	mov r6, r6, lsl r5 @ 0: LSL #!0
142	b .data_arm_apply_r6_and_rn
143	b .data_arm_apply_r6_and_rn @ 1: LSL #0
144	nop
145	b .data_unknown @ 2: MUL?
146	nop
147	b .data_unknown @ 3: MUL?
148	nop
149	mov r6, r6, lsr r5 @ 4: LSR #!0
150	b .data_arm_apply_r6_and_rn
151	mov r6, r6, lsr #32 @ 5: LSR #32
152	b .data_arm_apply_r6_and_rn
153	b .data_unknown @ 6: MUL?
154	nop
155	b .data_unknown @ 7: MUL?
156	nop
157	mov r6, r6, asr r5 @ 8: ASR #!0
158	b .data_arm_apply_r6_and_rn
159	mov r6, r6, asr #32 @ 9: ASR #32
160	b .data_arm_apply_r6_and_rn
161	b .data_unknown @ A: MUL?
162	nop
163	b .data_unknown @ B: MUL?
164	nop
165	mov r6, r6, ror r5 @ C: ROR #!0
166	b .data_arm_apply_r6_and_rn
167	mov r6, r6, rrx @ D: RRX
168	b .data_arm_apply_r6_and_rn
169	b .data_unknown @ E: MUL?
170	nop
171	b .data_unknown @ F: MUL?
172
173	/*
174	* Function: arm6_7_proc_init (void)
175	* : arm6_7_proc_fin (void)
176	*
177	* Notes : This processor does not require these
178	*/
179	ENTRY(cpu_arm6_proc_init)
180	ENTRY(cpu_arm7_proc_init)
181	mov pc, lr
182
183	ENTRY(cpu_arm6_proc_fin)
184	ENTRY(cpu_arm7_proc_fin)
185	mov r0, #PSR_F_BIT \| PSR_I_BIT \| SVC_MODE
186	msr cpsr_c, r0
187	mov r0, #0x31 @ ....S..DP...M
188	mcr p15, 0, r0, c1, c0, 0 @ disable caches
189	mov pc, lr
190
191	ENTRY(cpu_arm6_do_idle)
192	ENTRY(cpu_arm7_do_idle)
193	mov pc, lr
194
195	/*
196	* Function: arm6_7_switch_mm(unsigned long pgd_phys)
197	* Params : pgd_phys Physical address of page table
198	* Purpose : Perform a task switch, saving the old processes state, and restoring
199	* the new.
200	*/
201	ENTRY(cpu_arm6_switch_mm)
202	ENTRY(cpu_arm7_switch_mm)
d090ddda	203	#ifdef CONFIG_MMU
1da177e4 LT	204	mov r1, #0
	205	mcr p15, 0, r1, c7, c0, 0 @ flush cache
	206	mcr p15, 0, r0, c2, c0, 0 @ update page table ptr
	207	mcr p15, 0, r1, c5, c0, 0 @ flush TLBs
d090ddda	208	#endif
1da177e4 LT	209	mov pc, lr
	210
	211	/*
ad1ae2fe	212	* Function: arm6_7_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext)
1da177e4 LT	213	* Params : r0 = Address to set
	214	* : r1 = value to set
	215	* Purpose : Set a PTE and flush it out of any WB cache
	216	*/
	217	.align 5
ad1ae2fe RK	218	ENTRY(cpu_arm6_set_pte_ext)
ad1ae2fe RK	219	ENTRY(cpu_arm7_set_pte_ext)
d090ddda	220	#ifdef CONFIG_MMU
1da177e4 LT	221	str r1, [r0], #-2048 @ linux version
	222
	223	eor r1, r1, #L_PTE_PRESENT \| L_PTE_YOUNG \| L_PTE_WRITE \| L_PTE_DIRTY
	224
	225	bic r2, r1, #PTE_SMALL_AP_MASK
	226	bic r2, r2, #PTE_TYPE_MASK
	227	orr r2, r2, #PTE_TYPE_SMALL
	228
	229	tst r1, #L_PTE_USER @ User?
	230	orrne r2, r2, #PTE_SMALL_AP_URO_SRW
	231
	232	tst r1, #L_PTE_WRITE \| L_PTE_DIRTY @ Write and Dirty?
	233	orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
	234
	235	tst r1, #L_PTE_PRESENT \| L_PTE_YOUNG @ Present and Young
	236	movne r2, #0
	237
	238	str r2, [r0] @ hardware version
d090ddda	239	#endif /* CONFIG_MMU */
1da177e4 LT	240	mov pc, lr
	241
	242	/*
	243	* Function: _arm6_7_reset
	244	* Params : r0 = address to jump to
	245	* Notes : This sets up everything for a reset
	246	*/
	247	ENTRY(cpu_arm6_reset)
	248	ENTRY(cpu_arm7_reset)
	249	mov r1, #0
	250	mcr p15, 0, r1, c7, c0, 0 @ flush cache
d090ddda	251	#ifdef CONFIG_MMU
1da177e4	252	mcr p15, 0, r1, c5, c0, 0 @ flush TLB
d090ddda	253	#endif
1da177e4 LT	254	mov r1, #0x30
	255	mcr p15, 0, r1, c1, c0, 0 @ turn off MMU etc
	256	mov pc, r0
	257
	258	__INIT
	259
	260	.type __arm6_setup, #function
	261	__arm6_setup: mov r0, #0
	262	mcr p15, 0, r0, c7, c0 @ flush caches on v3
d090ddda	263	#ifdef CONFIG_MMU
1da177e4 LT	264	mcr p15, 0, r0, c5, c0 @ flush TLBs on v3
	265	mov r0, #0x3d @ . ..RS BLDP WCAM
	266	orr r0, r0, #0x100 @ . ..01 0011 1101
d090ddda HC	267	#else
	268	mov r0, #0x3c @ . ..RS BLDP WCA.
	269	#endif
1da177e4 LT	270	mov pc, lr
	271	.size __arm6_setup, . - __arm6_setup
	272
	273	.type __arm7_setup, #function
	274	__arm7_setup: mov r0, #0
	275	mcr p15, 0, r0, c7, c0 @ flush caches on v3
d090ddda	276	#ifdef CONFIG_MMU
1da177e4 LT	277	mcr p15, 0, r0, c5, c0 @ flush TLBs on v3
	278	mcr p15, 0, r0, c3, c0 @ load domain access register
	279	mov r0, #0x7d @ . ..RS BLDP WCAM
	280	orr r0, r0, #0x100 @ . ..01 0111 1101
d090ddda HC	281	#else
	282	mov r0, #0x7c @ . ..RS BLDP WCA.
	283	#endif
1da177e4 LT	284	mov pc, lr
	285	.size __arm7_setup, . - __arm7_setup
	286
	287	__INITDATA
	288
	289	/*
	290	* Purpose : Function pointers used to access above functions - all calls
	291	* come through these
	292	*/
	293	.type arm6_processor_functions, #object
	294	ENTRY(arm6_processor_functions)
	295	.word cpu_arm6_data_abort
	296	.word cpu_arm6_proc_init
	297	.word cpu_arm6_proc_fin
	298	.word cpu_arm6_reset
	299	.word cpu_arm6_do_idle
	300	.word cpu_arm6_dcache_clean_area
	301	.word cpu_arm6_switch_mm
ad1ae2fe	302	.word cpu_arm6_set_pte_ext
1da177e4 LT	303	.size arm6_processor_functions, . - arm6_processor_functions
	304
	305	/*
	306	* Purpose : Function pointers used to access above functions - all calls
	307	* come through these
	308	*/
	309	.type arm7_processor_functions, #object
	310	ENTRY(arm7_processor_functions)
	311	.word cpu_arm7_data_abort
	312	.word cpu_arm7_proc_init
	313	.word cpu_arm7_proc_fin
	314	.word cpu_arm7_reset
	315	.word cpu_arm7_do_idle
	316	.word cpu_arm7_dcache_clean_area
	317	.word cpu_arm7_switch_mm
ad1ae2fe	318	.word cpu_arm7_set_pte_ext
1da177e4 LT	319	.size arm7_processor_functions, . - arm7_processor_functions
	320
	321	.section ".rodata"
	322
	323	.type cpu_arch_name, #object
	324	cpu_arch_name: .asciz "armv3"
	325	.size cpu_arch_name, . - cpu_arch_name
	326
	327	.type cpu_elf_name, #object
	328	cpu_elf_name: .asciz "v3"
	329	.size cpu_elf_name, . - cpu_elf_name
	330
	331	.type cpu_arm6_name, #object
	332	cpu_arm6_name: .asciz "ARM6"
	333	.size cpu_arm6_name, . - cpu_arm6_name
	334
	335	.type cpu_arm610_name, #object
	336	cpu_arm610_name:
	337	.asciz "ARM610"
	338	.size cpu_arm610_name, . - cpu_arm610_name
	339
	340	.type cpu_arm7_name, #object
	341	cpu_arm7_name: .asciz "ARM7"
	342	.size cpu_arm7_name, . - cpu_arm7_name
	343
	344	.type cpu_arm710_name, #object
	345	cpu_arm710_name:
	346	.asciz "ARM710"
	347	.size cpu_arm710_name, . - cpu_arm710_name
	348
	349	.align
	350
02b7dd12	351	.section ".proc.info.init", #alloc, #execinstr
1da177e4 LT	352
	353	.type __arm6_proc_info, #object
	354	__arm6_proc_info:
	355	.long 0x41560600
	356	.long 0xfffffff0
	357	.long 0x00000c1e
8799ee9f RK	358	.long PMD_TYPE_SECT \| \
	359	PMD_BIT4 \| \
	360	PMD_SECT_AP_WRITE \| \
	361	PMD_SECT_AP_READ
1da177e4 LT	362	b __arm6_setup
	363	.long cpu_arch_name
	364	.long cpu_elf_name
	365	.long HWCAP_SWP \| HWCAP_26BIT
	366	.long cpu_arm6_name
	367	.long arm6_processor_functions
	368	.long v3_tlb_fns
	369	.long v3_user_fns
	370	.long v3_cache_fns
	371	.size __arm6_proc_info, . - __arm6_proc_info
	372
	373	.type __arm610_proc_info, #object
	374	__arm610_proc_info:
	375	.long 0x41560610
	376	.long 0xfffffff0
	377	.long 0x00000c1e
8799ee9f RK	378	.long PMD_TYPE_SECT \| \
	379	PMD_BIT4 \| \
	380	PMD_SECT_AP_WRITE \| \
	381	PMD_SECT_AP_READ
1da177e4 LT	382	b __arm6_setup
	383	.long cpu_arch_name
	384	.long cpu_elf_name
	385	.long HWCAP_SWP \| HWCAP_26BIT
	386	.long cpu_arm610_name
	387	.long arm6_processor_functions
	388	.long v3_tlb_fns
	389	.long v3_user_fns
	390	.long v3_cache_fns
	391	.size __arm610_proc_info, . - __arm610_proc_info
	392
	393	.type __arm7_proc_info, #object
	394	__arm7_proc_info:
	395	.long 0x41007000
	396	.long 0xffffff00
	397	.long 0x00000c1e
8799ee9f RK	398	.long PMD_TYPE_SECT \| \
	399	PMD_BIT4 \| \
	400	PMD_SECT_AP_WRITE \| \
	401	PMD_SECT_AP_READ
1da177e4 LT	402	b __arm7_setup
	403	.long cpu_arch_name
	404	.long cpu_elf_name
	405	.long HWCAP_SWP \| HWCAP_26BIT
	406	.long cpu_arm7_name
	407	.long arm7_processor_functions
	408	.long v3_tlb_fns
	409	.long v3_user_fns
	410	.long v3_cache_fns
	411	.size __arm7_proc_info, . - __arm7_proc_info
	412
	413	.type __arm710_proc_info, #object
	414	__arm710_proc_info:
	415	.long 0x41007100
	416	.long 0xfff8ff00
	417	.long PMD_TYPE_SECT \| \
	418	PMD_SECT_BUFFERABLE \| \
	419	PMD_SECT_CACHEABLE \| \
	420	PMD_BIT4 \| \
	421	PMD_SECT_AP_WRITE \| \
	422	PMD_SECT_AP_READ
8799ee9f RK	423	.long PMD_TYPE_SECT \| \
	424	PMD_BIT4 \| \
	425	PMD_SECT_AP_WRITE \| \
	426	PMD_SECT_AP_READ
1da177e4 LT	427	b __arm7_setup
	428	.long cpu_arch_name
	429	.long cpu_elf_name
	430	.long HWCAP_SWP \| HWCAP_26BIT
	431	.long cpu_arm710_name
	432	.long arm7_processor_functions
	433	.long v3_tlb_fns
	434	.long v3_user_fns
	435	.long v3_cache_fns
	436	.size __arm710_proc_info, . - __arm710_proc_info