Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * linux/arch/arm/mm/proc-arm1020e.S: MMU functions for ARM1020 | |
3 | * | |
4 | * Copyright (C) 2000 ARM Limited | |
5 | * Copyright (C) 2000 Deep Blue Solutions Ltd. | |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License as published by | |
9 | * the Free Software Foundation; either version 2 of the License, or | |
10 | * (at your option) any later version. | |
11 | * | |
12 | * This program is distributed in the hope that it will be useful, | |
13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | * GNU General Public License for more details. | |
16 | * | |
17 | * You should have received a copy of the GNU General Public License | |
18 | * along with this program; if not, write to the Free Software | |
19 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
20 | * | |
21 | * | |
22 | * These are the low level assembler for performing cache and TLB | |
23 | * functions on the arm1020e. | |
24 | * | |
25 | * CONFIG_CPU_ARM1020_CPU_IDLE -> nohlt | |
26 | */ | |
27 | #include <linux/linkage.h> | |
28 | #include <linux/config.h> | |
29 | #include <linux/init.h> | |
30 | #include <asm/assembler.h> | |
31 | #include <asm/constants.h> | |
32 | #include <asm/pgtable.h> | |
33 | #include <asm/procinfo.h> | |
34 | #include <asm/ptrace.h> | |
35 | #include <asm/hardware.h> | |
36 | ||
37 | /* | |
38 | * This is the maximum size of an area which will be invalidated | |
39 | * using the single invalidate entry instructions. Anything larger | |
40 | * than this, and we go for the whole cache. | |
41 | * | |
42 | * This value should be chosen such that we choose the cheapest | |
43 | * alternative. | |
44 | */ | |
45 | #define MAX_AREA_SIZE 32768 | |
46 | ||
47 | /* | |
48 | * The size of one data cache line. | |
49 | */ | |
50 | #define CACHE_DLINESIZE 32 | |
51 | ||
52 | /* | |
53 | * The number of data cache segments. | |
54 | */ | |
55 | #define CACHE_DSEGMENTS 16 | |
56 | ||
57 | /* | |
58 | * The number of lines in a cache segment. | |
59 | */ | |
60 | #define CACHE_DENTRIES 64 | |
61 | ||
62 | /* | |
63 | * This is the size at which it becomes more efficient to | |
64 | * clean the whole cache, rather than using the individual | |
65 | * cache line maintainence instructions. | |
66 | */ | |
67 | #define CACHE_DLIMIT 32768 | |
68 | ||
69 | .text | |
70 | /* | |
71 | * cpu_arm1020e_proc_init() | |
72 | */ | |
73 | ENTRY(cpu_arm1020e_proc_init) | |
74 | mov pc, lr | |
75 | ||
76 | /* | |
77 | * cpu_arm1020e_proc_fin() | |
78 | */ | |
79 | ENTRY(cpu_arm1020e_proc_fin) | |
80 | stmfd sp!, {lr} | |
81 | mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE | |
82 | msr cpsr_c, ip | |
83 | bl arm1020e_flush_kern_cache_all | |
84 | mrc p15, 0, r0, c1, c0, 0 @ ctrl register | |
85 | bic r0, r0, #0x1000 @ ...i............ | |
86 | bic r0, r0, #0x000e @ ............wca. | |
87 | mcr p15, 0, r0, c1, c0, 0 @ disable caches | |
88 | ldmfd sp!, {pc} | |
89 | ||
90 | /* | |
91 | * cpu_arm1020e_reset(loc) | |
92 | * | |
93 | * Perform a soft reset of the system. Put the CPU into the | |
94 | * same state as it would be if it had been reset, and branch | |
95 | * to what would be the reset vector. | |
96 | * | |
97 | * loc: location to jump to for soft reset | |
98 | */ | |
99 | .align 5 | |
100 | ENTRY(cpu_arm1020e_reset) | |
101 | mov ip, #0 | |
102 | mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches | |
103 | mcr p15, 0, ip, c7, c10, 4 @ drain WB | |
104 | mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs | |
105 | mrc p15, 0, ip, c1, c0, 0 @ ctrl register | |
106 | bic ip, ip, #0x000f @ ............wcam | |
107 | bic ip, ip, #0x1100 @ ...i...s........ | |
108 | mcr p15, 0, ip, c1, c0, 0 @ ctrl register | |
109 | mov pc, r0 | |
110 | ||
111 | /* | |
112 | * cpu_arm1020e_do_idle() | |
113 | */ | |
114 | .align 5 | |
115 | ENTRY(cpu_arm1020e_do_idle) | |
116 | mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt | |
117 | mov pc, lr | |
118 | ||
119 | /* ================================= CACHE ================================ */ | |
120 | ||
121 | .align 5 | |
122 | /* | |
123 | * flush_user_cache_all() | |
124 | * | |
125 | * Invalidate all cache entries in a particular address | |
126 | * space. | |
127 | */ | |
128 | ENTRY(arm1020e_flush_user_cache_all) | |
129 | /* FALLTHROUGH */ | |
130 | /* | |
131 | * flush_kern_cache_all() | |
132 | * | |
133 | * Clean and invalidate the entire cache. | |
134 | */ | |
135 | ENTRY(arm1020e_flush_kern_cache_all) | |
136 | mov r2, #VM_EXEC | |
137 | mov ip, #0 | |
138 | __flush_whole_cache: | |
139 | #ifndef CONFIG_CPU_DCACHE_DISABLE | |
140 | mcr p15, 0, ip, c7, c10, 4 @ drain WB | |
141 | mov r1, #(CACHE_DSEGMENTS - 1) << 5 @ 16 segments | |
142 | 1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries | |
143 | 2: mcr p15, 0, r3, c7, c14, 2 @ clean+invalidate D index | |
144 | subs r3, r3, #1 << 26 | |
145 | bcs 2b @ entries 63 to 0 | |
146 | subs r1, r1, #1 << 5 | |
147 | bcs 1b @ segments 15 to 0 | |
148 | #endif | |
149 | tst r2, #VM_EXEC | |
150 | #ifndef CONFIG_CPU_ICACHE_DISABLE | |
151 | mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache | |
152 | #endif | |
153 | mcrne p15, 0, ip, c7, c10, 4 @ drain WB | |
154 | mov pc, lr | |
155 | ||
156 | /* | |
157 | * flush_user_cache_range(start, end, flags) | |
158 | * | |
159 | * Invalidate a range of cache entries in the specified | |
160 | * address space. | |
161 | * | |
162 | * - start - start address (inclusive) | |
163 | * - end - end address (exclusive) | |
164 | * - flags - vm_flags for this space | |
165 | */ | |
166 | ENTRY(arm1020e_flush_user_cache_range) | |
167 | mov ip, #0 | |
168 | sub r3, r1, r0 @ calculate total size | |
169 | cmp r3, #CACHE_DLIMIT | |
170 | bhs __flush_whole_cache | |
171 | ||
172 | #ifndef CONFIG_CPU_DCACHE_DISABLE | |
173 | 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry | |
174 | add r0, r0, #CACHE_DLINESIZE | |
175 | cmp r0, r1 | |
176 | blo 1b | |
177 | #endif | |
178 | tst r2, #VM_EXEC | |
179 | #ifndef CONFIG_CPU_ICACHE_DISABLE | |
180 | mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache | |
181 | #endif | |
182 | mcrne p15, 0, ip, c7, c10, 4 @ drain WB | |
183 | mov pc, lr | |
184 | ||
185 | /* | |
186 | * coherent_kern_range(start, end) | |
187 | * | |
188 | * Ensure coherency between the Icache and the Dcache in the | |
189 | * region described by start. If you have non-snooping | |
190 | * Harvard caches, you need to implement this function. | |
191 | * | |
192 | * - start - virtual start address | |
193 | * - end - virtual end address | |
194 | */ | |
195 | ENTRY(arm1020e_coherent_kern_range) | |
196 | /* FALLTHROUGH */ | |
197 | /* | |
198 | * coherent_user_range(start, end) | |
199 | * | |
200 | * Ensure coherency between the Icache and the Dcache in the | |
201 | * region described by start. If you have non-snooping | |
202 | * Harvard caches, you need to implement this function. | |
203 | * | |
204 | * - start - virtual start address | |
205 | * - end - virtual end address | |
206 | */ | |
207 | ENTRY(arm1020e_coherent_user_range) | |
208 | mov ip, #0 | |
209 | bic r0, r0, #CACHE_DLINESIZE - 1 | |
210 | 1: | |
211 | #ifndef CONFIG_CPU_DCACHE_DISABLE | |
212 | mcr p15, 0, r0, c7, c10, 1 @ clean D entry | |
213 | #endif | |
214 | #ifndef CONFIG_CPU_ICACHE_DISABLE | |
215 | mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry | |
216 | #endif | |
217 | add r0, r0, #CACHE_DLINESIZE | |
218 | cmp r0, r1 | |
219 | blo 1b | |
220 | mcr p15, 0, ip, c7, c10, 4 @ drain WB | |
221 | mov pc, lr | |
222 | ||
223 | /* | |
224 | * flush_kern_dcache_page(void *page) | |
225 | * | |
226 | * Ensure no D cache aliasing occurs, either with itself or | |
227 | * the I cache | |
228 | * | |
229 | * - page - page aligned address | |
230 | */ | |
231 | ENTRY(arm1020e_flush_kern_dcache_page) | |
232 | mov ip, #0 | |
233 | #ifndef CONFIG_CPU_DCACHE_DISABLE | |
234 | add r1, r0, #PAGE_SZ | |
235 | 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry | |
236 | add r0, r0, #CACHE_DLINESIZE | |
237 | cmp r0, r1 | |
238 | blo 1b | |
239 | #endif | |
240 | mcr p15, 0, ip, c7, c10, 4 @ drain WB | |
241 | mov pc, lr | |
242 | ||
243 | /* | |
244 | * dma_inv_range(start, end) | |
245 | * | |
246 | * Invalidate (discard) the specified virtual address range. | |
247 | * May not write back any entries. If 'start' or 'end' | |
248 | * are not cache line aligned, those lines must be written | |
249 | * back. | |
250 | * | |
251 | * - start - virtual start address | |
252 | * - end - virtual end address | |
253 | * | |
254 | * (same as v4wb) | |
255 | */ | |
256 | ENTRY(arm1020e_dma_inv_range) | |
257 | mov ip, #0 | |
258 | #ifndef CONFIG_CPU_DCACHE_DISABLE | |
259 | tst r0, #CACHE_DLINESIZE - 1 | |
260 | bic r0, r0, #CACHE_DLINESIZE - 1 | |
261 | mcrne p15, 0, r0, c7, c10, 1 @ clean D entry | |
262 | tst r1, #CACHE_DLINESIZE - 1 | |
263 | mcrne p15, 0, r1, c7, c10, 1 @ clean D entry | |
264 | 1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry | |
265 | add r0, r0, #CACHE_DLINESIZE | |
266 | cmp r0, r1 | |
267 | blo 1b | |
268 | #endif | |
269 | mcr p15, 0, ip, c7, c10, 4 @ drain WB | |
270 | mov pc, lr | |
271 | ||
272 | /* | |
273 | * dma_clean_range(start, end) | |
274 | * | |
275 | * Clean the specified virtual address range. | |
276 | * | |
277 | * - start - virtual start address | |
278 | * - end - virtual end address | |
279 | * | |
280 | * (same as v4wb) | |
281 | */ | |
282 | ENTRY(arm1020e_dma_clean_range) | |
283 | mov ip, #0 | |
284 | #ifndef CONFIG_CPU_DCACHE_DISABLE | |
285 | bic r0, r0, #CACHE_DLINESIZE - 1 | |
286 | 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry | |
287 | add r0, r0, #CACHE_DLINESIZE | |
288 | cmp r0, r1 | |
289 | blo 1b | |
290 | #endif | |
291 | mcr p15, 0, ip, c7, c10, 4 @ drain WB | |
292 | mov pc, lr | |
293 | ||
294 | /* | |
295 | * dma_flush_range(start, end) | |
296 | * | |
297 | * Clean and invalidate the specified virtual address range. | |
298 | * | |
299 | * - start - virtual start address | |
300 | * - end - virtual end address | |
301 | */ | |
302 | ENTRY(arm1020e_dma_flush_range) | |
303 | mov ip, #0 | |
304 | #ifndef CONFIG_CPU_DCACHE_DISABLE | |
305 | bic r0, r0, #CACHE_DLINESIZE - 1 | |
306 | 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry | |
307 | add r0, r0, #CACHE_DLINESIZE | |
308 | cmp r0, r1 | |
309 | blo 1b | |
310 | #endif | |
311 | mcr p15, 0, ip, c7, c10, 4 @ drain WB | |
312 | mov pc, lr | |
313 | ||
314 | ENTRY(arm1020e_cache_fns) | |
315 | .long arm1020e_flush_kern_cache_all | |
316 | .long arm1020e_flush_user_cache_all | |
317 | .long arm1020e_flush_user_cache_range | |
318 | .long arm1020e_coherent_kern_range | |
319 | .long arm1020e_coherent_user_range | |
320 | .long arm1020e_flush_kern_dcache_page | |
321 | .long arm1020e_dma_inv_range | |
322 | .long arm1020e_dma_clean_range | |
323 | .long arm1020e_dma_flush_range | |
324 | ||
325 | .align 5 | |
326 | ENTRY(cpu_arm1020e_dcache_clean_area) | |
327 | #ifndef CONFIG_CPU_DCACHE_DISABLE | |
328 | mov ip, #0 | |
329 | 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry | |
330 | add r0, r0, #CACHE_DLINESIZE | |
331 | subs r1, r1, #CACHE_DLINESIZE | |
332 | bhi 1b | |
333 | #endif | |
334 | mov pc, lr | |
335 | ||
336 | /* =============================== PageTable ============================== */ | |
337 | ||
338 | /* | |
339 | * cpu_arm1020e_switch_mm(pgd) | |
340 | * | |
341 | * Set the translation base pointer to be as described by pgd. | |
342 | * | |
343 | * pgd: new page tables | |
344 | */ | |
345 | .align 5 | |
346 | ENTRY(cpu_arm1020e_switch_mm) | |
347 | #ifndef CONFIG_CPU_DCACHE_DISABLE | |
348 | mcr p15, 0, r3, c7, c10, 4 | |
349 | mov r1, #0xF @ 16 segments | |
350 | 1: mov r3, #0x3F @ 64 entries | |
351 | 2: mov ip, r3, LSL #26 @ shift up entry | |
352 | orr ip, ip, r1, LSL #5 @ shift in/up index | |
353 | mcr p15, 0, ip, c7, c14, 2 @ Clean & Inval DCache entry | |
354 | mov ip, #0 | |
355 | subs r3, r3, #1 | |
356 | cmp r3, #0 | |
357 | bge 2b @ entries 3F to 0 | |
358 | subs r1, r1, #1 | |
359 | cmp r1, #0 | |
360 | bge 1b @ segments 15 to 0 | |
361 | ||
362 | #endif | |
363 | mov r1, #0 | |
364 | #ifndef CONFIG_CPU_ICACHE_DISABLE | |
365 | mcr p15, 0, r1, c7, c5, 0 @ invalidate I cache | |
366 | #endif | |
367 | mcr p15, 0, r1, c7, c10, 4 @ drain WB | |
368 | mcr p15, 0, r0, c2, c0, 0 @ load page table pointer | |
369 | mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs | |
370 | mov pc, lr | |
371 | ||
372 | /* | |
373 | * cpu_arm1020e_set_pte(ptep, pte) | |
374 | * | |
375 | * Set a PTE and flush it out | |
376 | */ | |
377 | .align 5 | |
378 | ENTRY(cpu_arm1020e_set_pte) | |
379 | str r1, [r0], #-2048 @ linux version | |
380 | ||
381 | eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY | |
382 | ||
383 | bic r2, r1, #PTE_SMALL_AP_MASK | |
384 | bic r2, r2, #PTE_TYPE_MASK | |
385 | orr r2, r2, #PTE_TYPE_SMALL | |
386 | ||
387 | tst r1, #L_PTE_USER @ User? | |
388 | orrne r2, r2, #PTE_SMALL_AP_URO_SRW | |
389 | ||
390 | tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty? | |
391 | orreq r2, r2, #PTE_SMALL_AP_UNO_SRW | |
392 | ||
393 | tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young? | |
394 | movne r2, #0 | |
395 | ||
396 | #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH | |
397 | eor r3, r1, #0x0a @ C & small page? | |
398 | tst r3, #0x0b | |
399 | biceq r2, r2, #4 | |
400 | #endif | |
401 | str r2, [r0] @ hardware version | |
402 | mov r0, r0 | |
403 | #ifndef CONFIG_CPU_DCACHE_DISABLE | |
404 | mcr p15, 0, r0, c7, c10, 1 @ clean D entry | |
405 | #endif | |
406 | mov pc, lr | |
407 | ||
408 | __INIT | |
409 | ||
410 | .type __arm1020e_setup, #function | |
411 | __arm1020e_setup: | |
412 | mov r0, #0 | |
413 | mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4 | |
414 | mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4 | |
415 | mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4 | |
416 | mrc p15, 0, r0, c1, c0 @ get control register v4 | |
417 | ldr r5, arm1020e_cr1_clear | |
418 | bic r0, r0, r5 | |
419 | ldr r5, arm1020e_cr1_set | |
420 | orr r0, r0, r5 | |
421 | #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN | |
422 | orr r0, r0, #0x4000 @ .R.. .... .... .... | |
423 | #endif | |
424 | mov pc, lr | |
425 | .size __arm1020e_setup, . - __arm1020e_setup | |
426 | ||
427 | /* | |
428 | * R | |
429 | * .RVI ZFRS BLDP WCAM | |
abaf48a0 | 430 | * .011 1001 ..11 0101 |
1da177e4 LT |
431 | */ |
432 | .type arm1020e_cr1_clear, #object | |
433 | .type arm1020e_cr1_set, #object | |
434 | arm1020e_cr1_clear: | |
435 | .word 0x5f3f | |
436 | arm1020e_cr1_set: | |
abaf48a0 | 437 | .word 0x3935 |
1da177e4 LT |
438 | |
439 | __INITDATA | |
440 | ||
441 | /* | |
442 | * Purpose : Function pointers used to access above functions - all calls | |
443 | * come through these | |
444 | */ | |
445 | .type arm1020e_processor_functions, #object | |
446 | arm1020e_processor_functions: | |
447 | .word v4t_early_abort | |
448 | .word cpu_arm1020e_proc_init | |
449 | .word cpu_arm1020e_proc_fin | |
450 | .word cpu_arm1020e_reset | |
451 | .word cpu_arm1020e_do_idle | |
452 | .word cpu_arm1020e_dcache_clean_area | |
453 | .word cpu_arm1020e_switch_mm | |
454 | .word cpu_arm1020e_set_pte | |
455 | .size arm1020e_processor_functions, . - arm1020e_processor_functions | |
456 | ||
457 | .section ".rodata" | |
458 | ||
459 | .type cpu_arch_name, #object | |
460 | cpu_arch_name: | |
461 | .asciz "armv5te" | |
462 | .size cpu_arch_name, . - cpu_arch_name | |
463 | ||
464 | .type cpu_elf_name, #object | |
465 | cpu_elf_name: | |
466 | .asciz "v5" | |
467 | .size cpu_elf_name, . - cpu_elf_name | |
468 | ||
469 | .type cpu_arm1020e_name, #object | |
470 | cpu_arm1020e_name: | |
471 | .ascii "ARM1020E" | |
472 | #ifndef CONFIG_CPU_ICACHE_DISABLE | |
473 | .ascii "i" | |
474 | #endif | |
475 | #ifndef CONFIG_CPU_DCACHE_DISABLE | |
476 | .ascii "d" | |
477 | #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH | |
478 | .ascii "(wt)" | |
479 | #else | |
480 | .ascii "(wb)" | |
481 | #endif | |
482 | #endif | |
483 | #ifndef CONFIG_CPU_BPREDICT_DISABLE | |
484 | .ascii "B" | |
485 | #endif | |
486 | #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN | |
487 | .ascii "RR" | |
488 | #endif | |
489 | .ascii "\0" | |
490 | .size cpu_arm1020e_name, . - cpu_arm1020e_name | |
491 | ||
492 | .align | |
493 | ||
494 | .section ".proc.info", #alloc, #execinstr | |
495 | ||
496 | .type __arm1020e_proc_info,#object | |
497 | __arm1020e_proc_info: | |
498 | .long 0x4105a200 @ ARM 1020TE (Architecture v5TE) | |
499 | .long 0xff0ffff0 | |
500 | .long PMD_TYPE_SECT | \ | |
501 | PMD_BIT4 | \ | |
502 | PMD_SECT_AP_WRITE | \ | |
503 | PMD_SECT_AP_READ | |
504 | b __arm1020e_setup | |
505 | .long cpu_arch_name | |
506 | .long cpu_elf_name | |
507 | .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_EDSP | |
508 | .long cpu_arm1020e_name | |
509 | .long arm1020e_processor_functions | |
510 | .long v4wbi_tlb_fns | |
511 | .long v4wb_user_fns | |
512 | .long arm1020e_cache_fns | |
513 | .size __arm1020e_proc_info, . - __arm1020e_proc_info |