Commit | Line | Data |
---|---|---|
95790873 CW |
1 | /* Machine specific code for the Acer n30, Acer N35, Navman PiN 570, |
2 | * Yakumo AlphaX and Airis NC05 PDAs. | |
1da177e4 LT |
3 | * |
4 | * Copyright (c) 2003-2005 Simtec Electronics | |
5 | * Ben Dooks <ben@simtec.co.uk> | |
6 | * | |
196a0475 | 7 | * Copyright (c) 2005-2008 Christer Weinigel <christer@weinigel.se> |
1da177e4 LT |
8 | * |
9 | * There is a wiki with more information about the n30 port at | |
10 | * http://handhelds.org/moin/moin.cgi/AcerN30Documentation . | |
11 | * | |
12 | * This program is free software; you can redistribute it and/or modify | |
13 | * it under the terms of the GNU General Public License version 2 as | |
14 | * published by the Free Software Foundation. | |
95790873 | 15 | */ |
1da177e4 LT |
16 | |
17 | #include <linux/kernel.h> | |
18 | #include <linux/types.h> | |
196a0475 | 19 | |
1da177e4 | 20 | #include <linux/delay.h> |
62065750 | 21 | #include <linux/gpio_keys.h> |
196a0475 | 22 | #include <linux/init.h> |
62065750 | 23 | #include <linux/input.h> |
196a0475 | 24 | #include <linux/interrupt.h> |
d052d1be | 25 | #include <linux/platform_device.h> |
196a0475 CW |
26 | #include <linux/serial_core.h> |
27 | #include <linux/timer.h> | |
1da177e4 | 28 | |
a09e64fb | 29 | #include <mach/hardware.h> |
1da177e4 LT |
30 | #include <asm/io.h> |
31 | #include <asm/irq.h> | |
32 | #include <asm/mach-types.h> | |
33 | ||
a09e64fb RK |
34 | #include <mach/fb.h> |
35 | #include <mach/leds-gpio.h> | |
36 | #include <mach/regs-gpio.h> | |
37 | #include <mach/regs-lcd.h> | |
196a0475 CW |
38 | |
39 | #include <asm/mach/arch.h> | |
40 | #include <asm/mach/irq.h> | |
41 | #include <asm/mach/map.h> | |
42 | ||
531b617c | 43 | #include <asm/plat-s3c/iic.h> |
a2b7ba9c | 44 | #include <plat/regs-serial.h> |
1da177e4 | 45 | |
a21765a7 | 46 | #include <asm/plat-s3c24xx/clock.h> |
a2b7ba9c BD |
47 | #include <plat/cpu.h> |
48 | #include <plat/devs.h> | |
49 | #include <plat/s3c2410.h> | |
d088e5fe | 50 | #include <asm/plat-s3c24xx/udc.h> |
1da177e4 LT |
51 | |
52 | static struct map_desc n30_iodesc[] __initdata = { | |
53 | /* nothing here yet */ | |
54 | }; | |
55 | ||
56 | static struct s3c2410_uartcfg n30_uartcfgs[] = { | |
57 | /* Normal serial port */ | |
58 | [0] = { | |
59 | .hwport = 0, | |
60 | .flags = 0, | |
61 | .ucon = 0x2c5, | |
62 | .ulcon = 0x03, | |
63 | .ufcon = 0x51, | |
64 | }, | |
65 | /* IR port */ | |
66 | [1] = { | |
67 | .hwport = 1, | |
68 | .flags = 0, | |
69 | .uart_flags = UPF_CONS_FLOW, | |
70 | .ucon = 0x2c5, | |
71 | .ulcon = 0x43, | |
72 | .ufcon = 0x51, | |
73 | }, | |
95790873 CW |
74 | /* On the N30 the bluetooth controller is connected here. |
75 | * On the N35 and variants the GPS receiver is connected here. */ | |
1da177e4 LT |
76 | [2] = { |
77 | .hwport = 2, | |
78 | .flags = 0, | |
79 | .ucon = 0x2c5, | |
80 | .ulcon = 0x03, | |
81 | .ufcon = 0x51, | |
82 | }, | |
83 | }; | |
84 | ||
d088e5fe CW |
85 | static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd) |
86 | { | |
a6755780 BD |
87 | switch (cmd) { |
88 | case S3C2410_UDC_P_ENABLE : | |
89 | s3c2410_gpio_setpin(S3C2410_GPB3, 1); | |
90 | break; | |
91 | case S3C2410_UDC_P_DISABLE : | |
92 | s3c2410_gpio_setpin(S3C2410_GPB3, 0); | |
93 | break; | |
94 | case S3C2410_UDC_P_RESET : | |
95 | break; | |
96 | default: | |
97 | break; | |
d088e5fe CW |
98 | } |
99 | } | |
100 | ||
101 | static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = { | |
102 | .udc_command = n30_udc_pullup, | |
103 | .vbus_pin = S3C2410_GPG1, | |
104 | .vbus_pin_inverted = 0, | |
105 | }; | |
106 | ||
62065750 CW |
107 | static struct gpio_keys_button n30_buttons[] = { |
108 | { | |
109 | .gpio = S3C2410_GPF0, | |
110 | .code = KEY_POWER, | |
111 | .desc = "Power", | |
112 | .active_low = 0, | |
113 | }, | |
114 | { | |
115 | .gpio = S3C2410_GPG9, | |
116 | .code = KEY_UP, | |
117 | .desc = "Thumbwheel Up", | |
118 | .active_low = 0, | |
119 | }, | |
120 | { | |
121 | .gpio = S3C2410_GPG8, | |
122 | .code = KEY_DOWN, | |
123 | .desc = "Thumbwheel Down", | |
124 | .active_low = 0, | |
125 | }, | |
126 | { | |
127 | .gpio = S3C2410_GPG7, | |
128 | .code = KEY_ENTER, | |
129 | .desc = "Thumbwheel Press", | |
130 | .active_low = 0, | |
131 | }, | |
132 | { | |
133 | .gpio = S3C2410_GPF7, | |
134 | .code = KEY_HOMEPAGE, | |
135 | .desc = "Home", | |
136 | .active_low = 0, | |
137 | }, | |
138 | { | |
139 | .gpio = S3C2410_GPF6, | |
140 | .code = KEY_CALENDAR, | |
141 | .desc = "Calendar", | |
142 | .active_low = 0, | |
143 | }, | |
144 | { | |
145 | .gpio = S3C2410_GPF5, | |
146 | .code = KEY_ADDRESSBOOK, | |
147 | .desc = "Contacts", | |
148 | .active_low = 0, | |
149 | }, | |
150 | { | |
151 | .gpio = S3C2410_GPF4, | |
152 | .code = KEY_MAIL, | |
153 | .desc = "Mail", | |
154 | .active_low = 0, | |
155 | }, | |
156 | }; | |
157 | ||
158 | static struct gpio_keys_platform_data n30_button_data = { | |
159 | .buttons = n30_buttons, | |
160 | .nbuttons = ARRAY_SIZE(n30_buttons), | |
161 | }; | |
162 | ||
163 | static struct platform_device n30_button_device = { | |
164 | .name = "gpio-keys", | |
165 | .id = -1, | |
166 | .dev = { | |
167 | .platform_data = &n30_button_data, | |
168 | } | |
169 | }; | |
170 | ||
95790873 CW |
171 | static struct gpio_keys_button n35_buttons[] = { |
172 | { | |
173 | .gpio = S3C2410_GPF0, | |
174 | .code = KEY_POWER, | |
175 | .desc = "Power", | |
176 | .active_low = 0, | |
177 | }, | |
178 | { | |
179 | .gpio = S3C2410_GPG9, | |
180 | .code = KEY_UP, | |
181 | .desc = "Joystick Up", | |
182 | .active_low = 0, | |
183 | }, | |
184 | { | |
185 | .gpio = S3C2410_GPG8, | |
186 | .code = KEY_DOWN, | |
187 | .desc = "Joystick Down", | |
188 | .active_low = 0, | |
189 | }, | |
190 | { | |
191 | .gpio = S3C2410_GPG6, | |
192 | .code = KEY_DOWN, | |
193 | .desc = "Joystick Left", | |
194 | .active_low = 0, | |
195 | }, | |
196 | { | |
197 | .gpio = S3C2410_GPG5, | |
198 | .code = KEY_DOWN, | |
199 | .desc = "Joystick Right", | |
200 | .active_low = 0, | |
201 | }, | |
202 | { | |
203 | .gpio = S3C2410_GPG7, | |
204 | .code = KEY_ENTER, | |
205 | .desc = "Joystick Press", | |
206 | .active_low = 0, | |
207 | }, | |
208 | { | |
209 | .gpio = S3C2410_GPF7, | |
210 | .code = KEY_HOMEPAGE, | |
211 | .desc = "Home", | |
212 | .active_low = 0, | |
213 | }, | |
214 | { | |
215 | .gpio = S3C2410_GPF6, | |
216 | .code = KEY_CALENDAR, | |
217 | .desc = "Calendar", | |
218 | .active_low = 0, | |
219 | }, | |
220 | { | |
221 | .gpio = S3C2410_GPF5, | |
222 | .code = KEY_ADDRESSBOOK, | |
223 | .desc = "Contacts", | |
224 | .active_low = 0, | |
225 | }, | |
226 | { | |
227 | .gpio = S3C2410_GPF4, | |
228 | .code = KEY_MAIL, | |
229 | .desc = "Mail", | |
230 | .active_low = 0, | |
231 | }, | |
232 | { | |
233 | .gpio = S3C2410_GPF3, | |
234 | .code = SW_RADIO, | |
235 | .desc = "GPS Antenna", | |
236 | .active_low = 0, | |
237 | }, | |
238 | { | |
239 | .gpio = S3C2410_GPG2, | |
240 | .code = SW_HEADPHONE_INSERT, | |
241 | .desc = "Headphone", | |
242 | .active_low = 0, | |
243 | }, | |
244 | }; | |
245 | ||
246 | static struct gpio_keys_platform_data n35_button_data = { | |
247 | .buttons = n35_buttons, | |
248 | .nbuttons = ARRAY_SIZE(n35_buttons), | |
249 | }; | |
250 | ||
251 | static struct platform_device n35_button_device = { | |
252 | .name = "gpio-keys", | |
253 | .id = -1, | |
254 | .num_resources = 0, | |
255 | .dev = { | |
256 | .platform_data = &n35_button_data, | |
257 | } | |
258 | }; | |
259 | ||
865cc639 CW |
260 | /* This is the bluetooth LED on the device. */ |
261 | static struct s3c24xx_led_platdata n30_blue_led_pdata = { | |
262 | .name = "blue_led", | |
263 | .gpio = S3C2410_GPG6, | |
264 | .def_trigger = "", | |
265 | }; | |
266 | ||
267 | /* This LED is driven by the battery microcontroller, and is blinking | |
268 | * red, blinking green or solid green when the battery is low, | |
269 | * charging or full respectively. By driving GPD9 low, it's possible | |
270 | * to force the LED to blink red, so call that warning LED. */ | |
271 | static struct s3c24xx_led_platdata n30_warning_led_pdata = { | |
272 | .name = "warning_led", | |
273 | .flags = S3C24XX_LEDF_ACTLOW, | |
274 | .gpio = S3C2410_GPD9, | |
275 | .def_trigger = "", | |
276 | }; | |
277 | ||
278 | static struct platform_device n30_blue_led = { | |
279 | .name = "s3c24xx_led", | |
280 | .id = 1, | |
281 | .dev = { | |
282 | .platform_data = &n30_blue_led_pdata, | |
283 | }, | |
284 | }; | |
285 | ||
286 | static struct platform_device n30_warning_led = { | |
287 | .name = "s3c24xx_led", | |
288 | .id = 2, | |
289 | .dev = { | |
290 | .platform_data = &n30_warning_led_pdata, | |
291 | }, | |
292 | }; | |
293 | ||
e43f2383 | 294 | static struct s3c2410fb_display n30_display __initdata = { |
a6755780 BD |
295 | .type = S3C2410_LCDCON1_TFT, |
296 | .width = 240, | |
297 | .height = 320, | |
298 | .pixclock = 170000, | |
299 | ||
300 | .xres = 240, | |
301 | .yres = 320, | |
302 | .bpp = 16, | |
303 | .left_margin = 3, | |
304 | .right_margin = 40, | |
305 | .hsync_len = 40, | |
306 | .upper_margin = 2, | |
307 | .lower_margin = 3, | |
308 | .vsync_len = 2, | |
e43f2383 CW |
309 | |
310 | .lcdcon5 = S3C2410_LCDCON5_INVVLINE | S3C2410_LCDCON5_INVVFRAME, | |
311 | }; | |
312 | ||
313 | static struct s3c2410fb_mach_info n30_fb_info __initdata = { | |
a6755780 BD |
314 | .displays = &n30_display, |
315 | .num_displays = 1, | |
e43f2383 | 316 | .default_display = 0, |
a6755780 | 317 | .lpcsel = 0x06, |
e43f2383 CW |
318 | }; |
319 | ||
1da177e4 | 320 | static struct platform_device *n30_devices[] __initdata = { |
1da177e4 LT |
321 | &s3c_device_lcd, |
322 | &s3c_device_wdt, | |
323 | &s3c_device_i2c, | |
324 | &s3c_device_iis, | |
196a0475 | 325 | &s3c_device_usb, |
1da177e4 | 326 | &s3c_device_usbgadget, |
62065750 | 327 | &n30_button_device, |
865cc639 CW |
328 | &n30_blue_led, |
329 | &n30_warning_led, | |
1da177e4 LT |
330 | }; |
331 | ||
95790873 CW |
332 | static struct platform_device *n35_devices[] __initdata = { |
333 | &s3c_device_lcd, | |
334 | &s3c_device_wdt, | |
335 | &s3c_device_i2c, | |
336 | &s3c_device_iis, | |
337 | &s3c_device_usbgadget, | |
338 | &n35_button_device, | |
339 | }; | |
340 | ||
1da177e4 LT |
341 | static struct s3c2410_platform_i2c n30_i2ccfg = { |
342 | .flags = 0, | |
343 | .slave_addr = 0x10, | |
344 | .bus_freq = 10*1000, | |
345 | .max_freq = 10*1000, | |
346 | }; | |
347 | ||
9a2ddb78 CW |
348 | /* Lots of hardcoded stuff, but it sets up the hardware in a useful |
349 | * state so that we can boot Linux directly from flash. */ | |
350 | static void __init n30_hwinit(void) | |
351 | { | |
352 | /* GPA0-11 special functions -- unknown what they do | |
353 | * GPA12 N30 special function -- unknown what it does | |
354 | * N35/PiN output -- unknown what it does | |
355 | * | |
356 | * A12 is nGCS1 on the N30 and an output on the N35/PiN. I | |
357 | * don't think it does anything useful on the N30, so I ought | |
358 | * to make it an output there too since it always driven to 0 | |
359 | * as far as I can tell. */ | |
360 | if (machine_is_n30()) | |
361 | __raw_writel(0x007fffff, S3C2410_GPACON); | |
362 | if (machine_is_n35()) | |
363 | __raw_writel(0x007fefff, S3C2410_GPACON); | |
364 | __raw_writel(0x00000000, S3C2410_GPADAT); | |
365 | ||
366 | /* GPB0 TOUT0 backlight level | |
367 | * GPB1 output 1=backlight on | |
368 | * GPB2 output IrDA enable 0=transceiver enabled, 1=disabled | |
369 | * GPB3 output USB D+ pull up 0=disabled, 1=enabled | |
370 | * GPB4 N30 output -- unknown function | |
371 | * N30/PiN GPS control 0=GPS enabled, 1=GPS disabled | |
372 | * GPB5 output -- unknown function | |
373 | * GPB6 input -- unknown function | |
374 | * GPB7 output -- unknown function | |
375 | * GPB8 output -- probably LCD driver enable | |
376 | * GPB9 output -- probably LCD VSYNC driver enable | |
377 | * GPB10 output -- probably LCD HSYNC driver enable | |
378 | */ | |
379 | __raw_writel(0x00154556, S3C2410_GPBCON); | |
380 | __raw_writel(0x00000750, S3C2410_GPBDAT); | |
381 | __raw_writel(0x00000073, S3C2410_GPBUP); | |
382 | ||
383 | /* GPC0 input RS232 DCD/DSR/RI | |
384 | * GPC1 LCD | |
385 | * GPC2 output RS232 DTR? | |
386 | * GPC3 input RS232 DCD/DSR/RI | |
387 | * GPC4 LCD | |
388 | * GPC5 output 0=NAND write enabled, 1=NAND write protect | |
389 | * GPC6 input -- unknown function | |
390 | * GPC7 input charger status 0=charger connected | |
391 | * this input can be triggered by power on the USB device | |
392 | * port too, but will go back to disconnected soon after. | |
393 | * GPC8 N30/N35 output -- unknown function, always driven to 1 | |
394 | * PiN input -- unknown function, always read as 1 | |
395 | * Make it an input with a pull up for all models. | |
396 | * GPC9-15 LCD | |
397 | */ | |
398 | __raw_writel(0xaaa80618, S3C2410_GPCCON); | |
399 | __raw_writel(0x0000014c, S3C2410_GPCDAT); | |
400 | __raw_writel(0x0000fef2, S3C2410_GPCUP); | |
401 | ||
402 | /* GPD0 input -- unknown function | |
403 | * GPD1-D7 LCD | |
404 | * GPD8 N30 output -- unknown function | |
405 | * N35/PiN output 1=GPS LED on | |
406 | * GPD9 output 0=power led blinks red, 1=normal power led function | |
407 | * GPD10 output -- unknown function | |
408 | * GPD11-15 LCD drivers | |
409 | */ | |
410 | __raw_writel(0xaa95aaa4, S3C2410_GPDCON); | |
411 | __raw_writel(0x00000601, S3C2410_GPDDAT); | |
412 | __raw_writel(0x0000fbfe, S3C2410_GPDUP); | |
413 | ||
414 | /* GPE0-4 I2S audio bus | |
415 | * GPE5-10 SD/MMC bus | |
416 | * E11-13 outputs -- unknown function, probably power management | |
417 | * E14-15 I2C bus connected to the battery controller | |
418 | */ | |
419 | __raw_writel(0xa56aaaaa, S3C2410_GPECON); | |
420 | __raw_writel(0x0000efc5, S3C2410_GPEDAT); | |
421 | __raw_writel(0x0000f81f, S3C2410_GPEUP); | |
422 | ||
423 | /* GPF0 input 0=power button pressed | |
424 | * GPF1 input SD/MMC switch 0=card present | |
425 | * GPF2 N30 1=reset button pressed (inverted compared to the rest) | |
426 | * N35/PiN 0=reset button pressed | |
427 | * GPF3 N30/PiN input -- unknown function | |
428 | * N35 input GPS antenna position, 0=antenna closed, 1=open | |
429 | * GPF4 input 0=button 4 pressed | |
430 | * GPF5 input 0=button 3 pressed | |
431 | * GPF6 input 0=button 2 pressed | |
432 | * GPF7 input 0=button 1 pressed | |
433 | */ | |
434 | __raw_writel(0x0000aaaa, S3C2410_GPFCON); | |
435 | __raw_writel(0x00000000, S3C2410_GPFDAT); | |
436 | __raw_writel(0x000000ff, S3C2410_GPFUP); | |
437 | ||
438 | /* GPG0 input RS232 DCD/DSR/RI | |
439 | * GPG1 input 1=USB gadget port has power from a host | |
440 | * GPG2 N30 input -- unknown function | |
441 | * N35/PiN input 0=headphones plugged in, 1=not plugged in | |
442 | * GPG3 N30 output -- unknown function | |
443 | * N35/PiN input with unknown function | |
444 | * GPG4 N30 output 0=MMC enabled, 1=MMC disabled | |
445 | * GPG5 N30 output 0=BlueTooth chip disabled, 1=enabled | |
446 | * N35/PiN input joystick right | |
447 | * GPG6 N30 output 0=blue led on, 1=off | |
448 | * N35/PiN input joystick left | |
449 | * GPG7 input 0=thumbwheel pressed | |
450 | * GPG8 input 0=thumbwheel down | |
451 | * GPG9 input 0=thumbwheel up | |
452 | * GPG10 input SD/MMC write protect switch | |
453 | * GPG11 N30 input -- unknown function | |
454 | * N35 output 0=GPS antenna powered, 1=not powered | |
455 | * PiN output -- unknown function | |
456 | * GPG12-15 touch screen functions | |
457 | * | |
458 | * The pullups differ between the models, so enable all | |
459 | * pullups that are enabled on any of the models. | |
460 | */ | |
461 | if (machine_is_n30()) | |
462 | __raw_writel(0xff0a956a, S3C2410_GPGCON); | |
463 | if (machine_is_n35()) | |
464 | __raw_writel(0xff4aa92a, S3C2410_GPGCON); | |
465 | __raw_writel(0x0000e800, S3C2410_GPGDAT); | |
466 | __raw_writel(0x0000f86f, S3C2410_GPGUP); | |
467 | ||
468 | /* GPH0/1/2/3 RS232 serial port | |
469 | * GPH4/5 IrDA serial port | |
470 | * GPH6/7 N30 BlueTooth serial port | |
471 | * N35/PiN GPS receiver | |
472 | * GPH8 input -- unknown function | |
473 | * GPH9 CLKOUT0 HCLK -- unknown use | |
474 | * GPH10 CLKOUT1 FCLK -- unknown use | |
475 | * | |
476 | * The pull ups for H6/H7 are enabled on N30 but not on the | |
477 | * N35/PiN. I suppose is useful for a budget model of the N30 | |
478 | * with no bluetooh. It doesn't hurt to have the pull ups | |
479 | * enabled on the N35, so leave them enabled for all models. | |
480 | */ | |
481 | __raw_writel(0x0028aaaa, S3C2410_GPHCON); | |
482 | __raw_writel(0x000005ef, S3C2410_GPHDAT); | |
483 | __raw_writel(0x0000063f, S3C2410_GPHUP); | |
484 | } | |
485 | ||
5fe10ab1 | 486 | static void __init n30_map_io(void) |
1da177e4 LT |
487 | { |
488 | s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc)); | |
9a2ddb78 | 489 | n30_hwinit(); |
1da177e4 LT |
490 | s3c24xx_init_clocks(0); |
491 | s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs)); | |
1da177e4 LT |
492 | } |
493 | ||
5fe10ab1 | 494 | static void __init n30_init_irq(void) |
1da177e4 LT |
495 | { |
496 | s3c24xx_init_irq(); | |
497 | } | |
498 | ||
027da01d | 499 | /* GPB3 is the line that controls the pull-up for the USB D+ line */ |
1da177e4 | 500 | |
5fe10ab1 | 501 | static void __init n30_init(void) |
1da177e4 | 502 | { |
e43f2383 | 503 | s3c24xx_fb_set_platdata(&n30_fb_info); |
1da177e4 | 504 | s3c_device_i2c.dev.platform_data = &n30_i2ccfg; |
d088e5fe | 505 | s3c24xx_udc_set_platdata(&n30_udc_cfg); |
1da177e4 | 506 | |
027da01d BD |
507 | /* Turn off suspend on both USB ports, and switch the |
508 | * selectable USB port to USB device mode. */ | |
509 | ||
510 | s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | | |
511 | S3C2410_MISCCR_USBSUSPND0 | | |
512 | S3C2410_MISCCR_USBSUSPND1, 0x0); | |
57e5171c | 513 | |
95790873 CW |
514 | if (machine_is_n30()) { |
515 | /* Turn off suspend on both USB ports, and switch the | |
516 | * selectable USB port to USB device mode. */ | |
517 | s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | | |
518 | S3C2410_MISCCR_USBSUSPND0 | | |
519 | S3C2410_MISCCR_USBSUSPND1, 0x0); | |
520 | ||
521 | platform_add_devices(n30_devices, ARRAY_SIZE(n30_devices)); | |
522 | } | |
523 | ||
524 | if (machine_is_n35()) { | |
525 | /* Turn off suspend and switch the selectable USB port | |
526 | * to USB device mode. Turn on suspend for the host | |
527 | * port since it is not connected on the N35. | |
528 | * | |
529 | * Actually, the host port is available at some pads | |
530 | * on the back of the device, so it would actually be | |
531 | * possible to add a USB device inside the N35 if you | |
532 | * are willing to do some hardware modifications. */ | |
533 | s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | | |
534 | S3C2410_MISCCR_USBSUSPND0 | | |
535 | S3C2410_MISCCR_USBSUSPND1, | |
536 | S3C2410_MISCCR_USBSUSPND1); | |
537 | ||
538 | platform_add_devices(n35_devices, ARRAY_SIZE(n35_devices)); | |
539 | } | |
1da177e4 LT |
540 | } |
541 | ||
542 | MACHINE_START(N30, "Acer-N30") | |
027da01d BD |
543 | /* Maintainer: Christer Weinigel <christer@weinigel.se>, |
544 | Ben Dooks <ben-linux@fluff.org> | |
545 | */ | |
e9dea0c6 RK |
546 | .phys_io = S3C2410_PA_UART, |
547 | .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, | |
548 | .boot_params = S3C2410_SDRAM_PA + 0x100, | |
1da177e4 LT |
549 | .timer = &s3c24xx_timer, |
550 | .init_machine = n30_init, | |
551 | .init_irq = n30_init_irq, | |
552 | .map_io = n30_map_io, | |
553 | MACHINE_END | |
95790873 CW |
554 | |
555 | MACHINE_START(N35, "Acer-N35") | |
556 | /* Maintainer: Christer Weinigel <christer@weinigel.se> | |
557 | */ | |
558 | .phys_io = S3C2410_PA_UART, | |
559 | .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, | |
560 | .boot_params = S3C2410_SDRAM_PA + 0x100, | |
561 | .timer = &s3c24xx_timer, | |
562 | .init_machine = n30_init, | |
563 | .init_irq = n30_init_irq, | |
564 | .map_io = n30_map_io, | |
565 | MACHINE_END |