Commit | Line | Data |
---|---|---|
0dd28f1d RP |
1 | /* |
2 | * Support for Sharp SL-Cxx00 Series of PDAs | |
3 | * Models: SL-C3000 (Spitz), SL-C1000 (Akita) and SL-C3100 (Borzoi) | |
4 | * | |
5 | * Copyright (c) 2005 Richard Purdie | |
6 | * | |
7 | * Based on Sharp's 2.4 kernel patches/lubbock.c | |
8 | * | |
9 | * This program is free software; you can redistribute it and/or modify | |
10 | * it under the terms of the GNU General Public License version 2 as | |
11 | * published by the Free Software Foundation. | |
12 | * | |
13 | */ | |
14 | ||
15 | #include <linux/kernel.h> | |
16 | #include <linux/init.h> | |
d052d1be | 17 | #include <linux/platform_device.h> |
0dd28f1d RP |
18 | #include <linux/delay.h> |
19 | #include <linux/major.h> | |
20 | #include <linux/fs.h> | |
21 | #include <linux/interrupt.h> | |
22 | #include <linux/mmc/host.h> | |
23 | ||
24 | #include <asm/setup.h> | |
25 | #include <asm/memory.h> | |
26 | #include <asm/mach-types.h> | |
27 | #include <asm/hardware.h> | |
28 | #include <asm/irq.h> | |
29 | #include <asm/io.h> | |
30 | ||
31 | #include <asm/mach/arch.h> | |
32 | #include <asm/mach/map.h> | |
33 | #include <asm/mach/irq.h> | |
34 | ||
35 | #include <asm/arch/pxa-regs.h> | |
dc07845d | 36 | #include <asm/arch/irda.h> |
0dd28f1d | 37 | #include <asm/arch/mmc.h> |
3125c68d | 38 | #include <asm/arch/ohci.h> |
0dd28f1d | 39 | #include <asm/arch/udc.h> |
0dd28f1d RP |
40 | #include <asm/arch/pxafb.h> |
41 | #include <asm/arch/akita.h> | |
42 | #include <asm/arch/spitz.h> | |
43 | #include <asm/arch/sharpsl.h> | |
44 | ||
45 | #include <asm/mach/sharpsl_param.h> | |
46 | #include <asm/hardware/scoop.h> | |
47 | ||
48 | #include "generic.h" | |
49 | #include "sharpsl.h" | |
50 | ||
51 | /* | |
52 | * Spitz SCOOP Device #1 | |
53 | */ | |
54 | static struct resource spitz_scoop_resources[] = { | |
55 | [0] = { | |
56 | .start = 0x10800000, | |
57 | .end = 0x10800fff, | |
58 | .flags = IORESOURCE_MEM, | |
59 | }, | |
60 | }; | |
61 | ||
62 | static struct scoop_config spitz_scoop_setup = { | |
63 | .io_dir = SPITZ_SCP_IO_DIR, | |
64 | .io_out = SPITZ_SCP_IO_OUT, | |
65 | .suspend_clr = SPITZ_SCP_SUS_CLR, | |
66 | .suspend_set = SPITZ_SCP_SUS_SET, | |
67 | }; | |
68 | ||
69 | struct platform_device spitzscoop_device = { | |
70 | .name = "sharp-scoop", | |
71 | .id = 0, | |
72 | .dev = { | |
73 | .platform_data = &spitz_scoop_setup, | |
74 | }, | |
75 | .num_resources = ARRAY_SIZE(spitz_scoop_resources), | |
76 | .resource = spitz_scoop_resources, | |
77 | }; | |
78 | ||
79 | /* | |
80 | * Spitz SCOOP Device #2 | |
81 | */ | |
82 | static struct resource spitz_scoop2_resources[] = { | |
83 | [0] = { | |
84 | .start = 0x08800040, | |
85 | .end = 0x08800fff, | |
86 | .flags = IORESOURCE_MEM, | |
87 | }, | |
88 | }; | |
89 | ||
90 | static struct scoop_config spitz_scoop2_setup = { | |
91 | .io_dir = SPITZ_SCP2_IO_DIR, | |
92 | .io_out = SPITZ_SCP2_IO_OUT, | |
93 | .suspend_clr = SPITZ_SCP2_SUS_CLR, | |
94 | .suspend_set = SPITZ_SCP2_SUS_SET, | |
95 | }; | |
96 | ||
97 | struct platform_device spitzscoop2_device = { | |
98 | .name = "sharp-scoop", | |
99 | .id = 1, | |
100 | .dev = { | |
101 | .platform_data = &spitz_scoop2_setup, | |
102 | }, | |
103 | .num_resources = ARRAY_SIZE(spitz_scoop2_resources), | |
104 | .resource = spitz_scoop2_resources, | |
105 | }; | |
106 | ||
a63ae442 RP |
107 | #define SPITZ_PWR_SD 0x01 |
108 | #define SPITZ_PWR_CF 0x02 | |
109 | ||
110 | /* Power control is shared with between one of the CF slots and SD */ | |
111 | static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr) | |
112 | { | |
113 | unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR); | |
114 | ||
115 | if (new_cpr & 0x0007) { | |
116 | set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); | |
117 | if (!(cpr & 0x0002) && !(cpr & 0x0004)) | |
118 | mdelay(5); | |
119 | if (device == SPITZ_PWR_CF) | |
120 | cpr |= 0x0002; | |
121 | if (device == SPITZ_PWR_SD) | |
122 | cpr |= 0x0004; | |
123 | write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr); | |
124 | } else { | |
125 | if (device == SPITZ_PWR_CF) | |
126 | cpr &= ~0x0002; | |
127 | if (device == SPITZ_PWR_SD) | |
128 | cpr &= ~0x0004; | |
a63ae442 | 129 | if (!(cpr & 0x0002) && !(cpr & 0x0004)) { |
945b9579 | 130 | write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, 0x0000); |
a63ae442 RP |
131 | mdelay(1); |
132 | reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); | |
945b9579 RP |
133 | } else { |
134 | write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr); | |
a63ae442 RP |
135 | } |
136 | } | |
137 | } | |
138 | ||
139 | static void spitz_pcmcia_init(void) | |
140 | { | |
141 | /* Setup default state of GPIO outputs | |
142 | before we enable them as outputs. */ | |
143 | GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) | | |
144 | GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) | | |
145 | GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO54_nPCE_2); | |
146 | GPSR(GPIO85_nPCE_1) = GPIO_bit(GPIO85_nPCE_1); | |
147 | ||
148 | pxa_gpio_mode(GPIO48_nPOE_MD); | |
149 | pxa_gpio_mode(GPIO49_nPWE_MD); | |
150 | pxa_gpio_mode(GPIO50_nPIOR_MD); | |
151 | pxa_gpio_mode(GPIO51_nPIOW_MD); | |
152 | pxa_gpio_mode(GPIO55_nPREG_MD); | |
153 | pxa_gpio_mode(GPIO56_nPWAIT_MD); | |
154 | pxa_gpio_mode(GPIO57_nIOIS16_MD); | |
155 | pxa_gpio_mode(GPIO85_nPCE_1_MD); | |
156 | pxa_gpio_mode(GPIO54_nPCE_2_MD); | |
157 | pxa_gpio_mode(GPIO104_pSKTSEL_MD); | |
158 | } | |
159 | ||
160 | static void spitz_pcmcia_pwr(struct device *scoop, unsigned short cpr, int nr) | |
161 | { | |
162 | /* Only need to override behaviour for slot 0 */ | |
163 | if (nr == 0) | |
164 | spitz_card_pwr_ctrl(SPITZ_PWR_CF, cpr); | |
165 | else | |
166 | write_scoop_reg(scoop, SCOOP_CPR, cpr); | |
167 | } | |
168 | ||
0dd28f1d RP |
169 | static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = { |
170 | { | |
171 | .dev = &spitzscoop_device.dev, | |
172 | .irq = SPITZ_IRQ_GPIO_CF_IRQ, | |
173 | .cd_irq = SPITZ_IRQ_GPIO_CF_CD, | |
174 | .cd_irq_str = "PCMCIA0 CD", | |
175 | },{ | |
176 | .dev = &spitzscoop2_device.dev, | |
177 | .irq = SPITZ_IRQ_GPIO_CF2_IRQ, | |
178 | .cd_irq = -1, | |
179 | }, | |
180 | }; | |
181 | ||
a63ae442 RP |
182 | static struct scoop_pcmcia_config spitz_pcmcia_config = { |
183 | .devs = &spitz_pcmcia_scoop[0], | |
184 | .num_devs = 2, | |
185 | .pcmcia_init = spitz_pcmcia_init, | |
186 | .power_ctrl = spitz_pcmcia_pwr, | |
187 | }; | |
188 | ||
189 | EXPORT_SYMBOL(spitzscoop_device); | |
190 | EXPORT_SYMBOL(spitzscoop2_device); | |
191 | ||
0dd28f1d RP |
192 | |
193 | /* | |
194 | * Spitz SSP Device | |
195 | * | |
196 | * Set the parent as the scoop device because a lot of SSP devices | |
197 | * also use scoop functions and this makes the power up/down order | |
198 | * work correctly. | |
199 | */ | |
200 | struct platform_device spitzssp_device = { | |
201 | .name = "corgi-ssp", | |
202 | .dev = { | |
203 | .parent = &spitzscoop_device.dev, | |
204 | }, | |
205 | .id = -1, | |
206 | }; | |
207 | ||
208 | struct corgissp_machinfo spitz_ssp_machinfo = { | |
209 | .port = 2, | |
210 | .cs_lcdcon = SPITZ_GPIO_LCDCON_CS, | |
211 | .cs_ads7846 = SPITZ_GPIO_ADS7846_CS, | |
212 | .cs_max1111 = SPITZ_GPIO_MAX1111_CS, | |
213 | .clk_lcdcon = 520, | |
214 | .clk_ads7846 = 14, | |
215 | .clk_max1111 = 56, | |
216 | }; | |
217 | ||
218 | ||
219 | /* | |
220 | * Spitz Backlight Device | |
221 | */ | |
222 | static struct corgibl_machinfo spitz_bl_machinfo = { | |
2c0f5fb0 RP |
223 | .default_intensity = 0x1f, |
224 | .limit_mask = 0x0b, | |
0dd28f1d RP |
225 | .max_intensity = 0x2f, |
226 | }; | |
227 | ||
228 | static struct platform_device spitzbl_device = { | |
229 | .name = "corgi-bl", | |
230 | .dev = { | |
231 | .platform_data = &spitz_bl_machinfo, | |
232 | }, | |
233 | .id = -1, | |
234 | }; | |
235 | ||
236 | ||
237 | /* | |
238 | * Spitz Keyboard Device | |
239 | */ | |
240 | static struct platform_device spitzkbd_device = { | |
241 | .name = "spitz-keyboard", | |
242 | .id = -1, | |
243 | }; | |
244 | ||
245 | ||
3179108d RP |
246 | /* |
247 | * Spitz LEDs | |
248 | */ | |
249 | static struct platform_device spitzled_device = { | |
250 | .name = "spitz-led", | |
251 | .id = -1, | |
252 | }; | |
253 | ||
0dd28f1d RP |
254 | /* |
255 | * Spitz Touch Screen Device | |
256 | */ | |
257 | static struct resource spitzts_resources[] = { | |
258 | [0] = { | |
259 | .start = SPITZ_IRQ_GPIO_TP_INT, | |
260 | .end = SPITZ_IRQ_GPIO_TP_INT, | |
261 | .flags = IORESOURCE_IRQ, | |
262 | }, | |
263 | }; | |
264 | ||
265 | static struct corgits_machinfo spitz_ts_machinfo = { | |
266 | .get_hsync_len = spitz_get_hsync_len, | |
267 | .put_hsync = spitz_put_hsync, | |
268 | .wait_hsync = spitz_wait_hsync, | |
269 | }; | |
270 | ||
271 | static struct platform_device spitzts_device = { | |
272 | .name = "corgi-ts", | |
273 | .dev = { | |
274 | .parent = &spitzssp_device.dev, | |
275 | .platform_data = &spitz_ts_machinfo, | |
276 | }, | |
277 | .id = -1, | |
278 | .num_resources = ARRAY_SIZE(spitzts_resources), | |
279 | .resource = spitzts_resources, | |
280 | }; | |
281 | ||
282 | ||
283 | /* | |
284 | * MMC/SD Device | |
285 | * | |
286 | * The card detect interrupt isn't debounced so we delay it by 250ms | |
287 | * to give the card a chance to fully insert/eject. | |
288 | */ | |
289 | ||
290 | static struct pxamci_platform_data spitz_mci_platform_data; | |
291 | ||
292 | static int spitz_mci_init(struct device *dev, irqreturn_t (*spitz_detect_int)(int, void *, struct pt_regs *), void *data) | |
293 | { | |
294 | int err; | |
295 | ||
296 | /* setup GPIO for PXA27x MMC controller */ | |
297 | pxa_gpio_mode(GPIO32_MMCCLK_MD); | |
298 | pxa_gpio_mode(GPIO112_MMCCMD_MD); | |
299 | pxa_gpio_mode(GPIO92_MMCDAT0_MD); | |
300 | pxa_gpio_mode(GPIO109_MMCDAT1_MD); | |
301 | pxa_gpio_mode(GPIO110_MMCDAT2_MD); | |
302 | pxa_gpio_mode(GPIO111_MMCDAT3_MD); | |
303 | pxa_gpio_mode(SPITZ_GPIO_nSD_DETECT | GPIO_IN); | |
304 | pxa_gpio_mode(SPITZ_GPIO_nSD_WP | GPIO_IN); | |
305 | ||
306 | spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250); | |
307 | ||
9ded96f2 RK |
308 | err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int, |
309 | SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING, | |
310 | "MMC card detect", data); | |
0dd28f1d RP |
311 | if (err) { |
312 | printk(KERN_ERR "spitz_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); | |
313 | return -1; | |
314 | } | |
315 | ||
0dd28f1d RP |
316 | return 0; |
317 | } | |
318 | ||
0dd28f1d RP |
319 | static void spitz_mci_setpower(struct device *dev, unsigned int vdd) |
320 | { | |
321 | struct pxamci_platform_data* p_d = dev->platform_data; | |
322 | ||
a63ae442 RP |
323 | if (( 1 << vdd) & p_d->ocr_mask) |
324 | spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0004); | |
325 | else | |
326 | spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0000); | |
0dd28f1d RP |
327 | } |
328 | ||
329 | static int spitz_mci_get_ro(struct device *dev) | |
330 | { | |
331 | return GPLR(SPITZ_GPIO_nSD_WP) & GPIO_bit(SPITZ_GPIO_nSD_WP); | |
332 | } | |
333 | ||
334 | static void spitz_mci_exit(struct device *dev, void *data) | |
335 | { | |
336 | free_irq(SPITZ_IRQ_GPIO_nSD_DETECT, data); | |
337 | } | |
338 | ||
339 | static struct pxamci_platform_data spitz_mci_platform_data = { | |
340 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, | |
341 | .init = spitz_mci_init, | |
342 | .get_ro = spitz_mci_get_ro, | |
343 | .setpower = spitz_mci_setpower, | |
344 | .exit = spitz_mci_exit, | |
345 | }; | |
346 | ||
347 | ||
3125c68d RP |
348 | /* |
349 | * USB Host (OHCI) | |
350 | */ | |
351 | static int spitz_ohci_init(struct device *dev) | |
352 | { | |
353 | /* Only Port 2 is connected */ | |
354 | pxa_gpio_mode(SPITZ_GPIO_USB_CONNECT | GPIO_IN); | |
355 | pxa_gpio_mode(SPITZ_GPIO_USB_HOST | GPIO_OUT); | |
356 | pxa_gpio_mode(SPITZ_GPIO_USB_DEVICE | GPIO_IN); | |
357 | ||
358 | /* Setup USB Port 2 Output Control Register */ | |
359 | UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE; | |
360 | ||
361 | GPSR(SPITZ_GPIO_USB_HOST) = GPIO_bit(SPITZ_GPIO_USB_HOST); | |
362 | ||
363 | UHCHR = (UHCHR) & | |
364 | ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE); | |
365 | ||
366 | UHCRHDA |= UHCRHDA_NOCP; | |
367 | ||
368 | return 0; | |
369 | } | |
370 | ||
371 | static struct pxaohci_platform_data spitz_ohci_platform_data = { | |
372 | .port_mode = PMM_NPS_MODE, | |
373 | .init = spitz_ohci_init, | |
0c27c5d5 | 374 | .power_budget = 150, |
3125c68d RP |
375 | }; |
376 | ||
377 | ||
dc07845d RP |
378 | /* |
379 | * Irda | |
380 | */ | |
381 | static void spitz_irda_transceiver_mode(struct device *dev, int mode) | |
382 | { | |
383 | if (mode & IR_OFF) | |
384 | set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON); | |
385 | else | |
386 | reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON); | |
387 | } | |
388 | ||
94cabd00 RP |
389 | #ifdef CONFIG_MACH_AKITA |
390 | static void akita_irda_transceiver_mode(struct device *dev, int mode) | |
391 | { | |
392 | if (mode & IR_OFF) | |
393 | akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON); | |
394 | else | |
395 | akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON); | |
396 | } | |
397 | #endif | |
398 | ||
dc07845d RP |
399 | static struct pxaficp_platform_data spitz_ficp_platform_data = { |
400 | .transceiver_cap = IR_SIRMODE | IR_OFF, | |
401 | .transceiver_mode = spitz_irda_transceiver_mode, | |
402 | }; | |
403 | ||
404 | ||
0dd28f1d RP |
405 | /* |
406 | * Spitz PXA Framebuffer | |
407 | */ | |
408 | static struct pxafb_mach_info spitz_pxafb_info __initdata = { | |
409 | .pixclock = 19231, | |
410 | .xres = 480, | |
411 | .yres = 640, | |
412 | .bpp = 16, | |
413 | .hsync_len = 40, | |
414 | .left_margin = 46, | |
415 | .right_margin = 125, | |
416 | .vsync_len = 3, | |
417 | .upper_margin = 1, | |
418 | .lower_margin = 0, | |
419 | .sync = 0, | |
420 | .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act | LCCR0_LDDALT | LCCR0_OUC | LCCR0_CMDIM | LCCR0_RDSTM, | |
421 | .lccr3 = LCCR3_PixRsEdg | LCCR3_OutEnH, | |
422 | .pxafb_lcd_power = spitz_lcd_power, | |
423 | }; | |
424 | ||
425 | ||
426 | static struct platform_device *devices[] __initdata = { | |
427 | &spitzscoop_device, | |
428 | &spitzssp_device, | |
429 | &spitzkbd_device, | |
430 | &spitzts_device, | |
431 | &spitzbl_device, | |
3179108d | 432 | &spitzled_device, |
0dd28f1d RP |
433 | }; |
434 | ||
435 | static void __init common_init(void) | |
436 | { | |
437 | PMCR = 0x00; | |
438 | ||
439 | /* setup sleep mode values */ | |
440 | PWER = 0x00000002; | |
441 | PFER = 0x00000000; | |
442 | PRER = 0x00000002; | |
443 | PGSR0 = 0x0158C000; | |
444 | PGSR1 = 0x00FF0080; | |
445 | PGSR2 = 0x0001C004; | |
446 | ||
447 | /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */ | |
448 | PCFR |= PCFR_OPDE; | |
449 | ||
450 | corgi_ssp_set_machinfo(&spitz_ssp_machinfo); | |
451 | ||
452 | pxa_gpio_mode(SPITZ_GPIO_HSYNC | GPIO_IN); | |
453 | ||
454 | platform_add_devices(devices, ARRAY_SIZE(devices)); | |
455 | pxa_set_mci_info(&spitz_mci_platform_data); | |
3125c68d | 456 | pxa_set_ohci_info(&spitz_ohci_platform_data); |
dc07845d | 457 | pxa_set_ficp_info(&spitz_ficp_platform_data); |
cb38c569 | 458 | set_pxa_fb_parent(&spitzssp_device.dev); |
0dd28f1d RP |
459 | set_pxa_fb_info(&spitz_pxafb_info); |
460 | } | |
461 | ||
462 | static void __init spitz_init(void) | |
463 | { | |
a63ae442 RP |
464 | platform_scoop_config = &spitz_pcmcia_config; |
465 | ||
0dd28f1d RP |
466 | spitz_bl_machinfo.set_bl_intensity = spitz_bl_set_intensity; |
467 | ||
468 | common_init(); | |
469 | ||
470 | platform_device_register(&spitzscoop2_device); | |
471 | } | |
472 | ||
94cabd00 RP |
473 | #ifdef CONFIG_MACH_AKITA |
474 | /* | |
475 | * Akita IO Expander | |
476 | */ | |
477 | struct platform_device akitaioexp_device = { | |
478 | .name = "akita-ioexp", | |
479 | .id = -1, | |
480 | }; | |
481 | ||
bd8f103e RP |
482 | EXPORT_SYMBOL_GPL(akitaioexp_device); |
483 | ||
94cabd00 RP |
484 | static void __init akita_init(void) |
485 | { | |
486 | spitz_ficp_platform_data.transceiver_mode = akita_irda_transceiver_mode; | |
487 | ||
488 | /* We just pretend the second element of the array doesn't exist */ | |
489 | spitz_pcmcia_config.num_devs = 1; | |
490 | platform_scoop_config = &spitz_pcmcia_config; | |
491 | spitz_bl_machinfo.set_bl_intensity = akita_bl_set_intensity; | |
492 | ||
493 | platform_device_register(&akitaioexp_device); | |
494 | ||
495 | spitzscoop_device.dev.parent = &akitaioexp_device.dev; | |
496 | common_init(); | |
497 | } | |
498 | #endif | |
499 | ||
500 | ||
0dd28f1d RP |
501 | static void __init fixup_spitz(struct machine_desc *desc, |
502 | struct tag *tags, char **cmdline, struct meminfo *mi) | |
503 | { | |
504 | sharpsl_save_param(); | |
505 | mi->nr_banks = 1; | |
506 | mi->bank[0].start = 0xa0000000; | |
507 | mi->bank[0].node = 0; | |
508 | mi->bank[0].size = (64*1024*1024); | |
509 | } | |
510 | ||
511 | #ifdef CONFIG_MACH_SPITZ | |
512 | MACHINE_START(SPITZ, "SHARP Spitz") | |
0dd28f1d RP |
513 | .phys_io = 0x40000000, |
514 | .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, | |
515 | .fixup = fixup_spitz, | |
516 | .map_io = pxa_map_io, | |
517 | .init_irq = pxa_init_irq, | |
518 | .init_machine = spitz_init, | |
519 | .timer = &pxa_timer, | |
520 | MACHINE_END | |
521 | #endif | |
522 | ||
523 | #ifdef CONFIG_MACH_BORZOI | |
524 | MACHINE_START(BORZOI, "SHARP Borzoi") | |
0dd28f1d RP |
525 | .phys_io = 0x40000000, |
526 | .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, | |
527 | .fixup = fixup_spitz, | |
528 | .map_io = pxa_map_io, | |
529 | .init_irq = pxa_init_irq, | |
530 | .init_machine = spitz_init, | |
531 | .timer = &pxa_timer, | |
532 | MACHINE_END | |
533 | #endif | |
94cabd00 RP |
534 | |
535 | #ifdef CONFIG_MACH_AKITA | |
536 | MACHINE_START(AKITA, "SHARP Akita") | |
94cabd00 RP |
537 | .phys_io = 0x40000000, |
538 | .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, | |
539 | .fixup = fixup_spitz, | |
540 | .map_io = pxa_map_io, | |
541 | .init_irq = pxa_init_irq, | |
542 | .init_machine = akita_init, | |
543 | .timer = &pxa_timer, | |
544 | MACHINE_END | |
545 | #endif |