[linux-block.git] / arch / arm / mach-pxa / pcm990_baseboard.h

/*
 * arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
 *
 * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
 * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */

#include "pcm027.h"
#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */

/*
 * definitions relevant only when the PCM-990
 * development base board is in use
 */

/* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */
#define PCM990_CTRL_INT_IRQ_GPIO	9
#define PCM990_CTRL_INT_IRQ		PXA_GPIO_TO_IRQ(PCM990_CTRL_INT_IRQ_GPIO)
#define PCM990_CTRL_INT_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
#define PCM990_CTRL_PHYS		PXA_CS1_PHYS	/* 16-Bit */
#define PCM990_CTRL_SIZE		(1*1024*1024)

#define PCM990_CTRL_PWR_IRQ_GPIO	14
#define PCM990_CTRL_PWR_IRQ		PXA_GPIO_TO_IRQ(PCM990_CTRL_PWR_IRQ_GPIO)
#define PCM990_CTRL_PWR_IRQ_EDGE	IRQ_TYPE_EDGE_RISING

/* visible CPLD (U7) registers */
#define PCM990_CTRL_REG0	0x0000	/* RESET REGISTER */
#define PCM990_CTRL_SYSRES	0x0001	/* System RESET REGISTER */
#define PCM990_CTRL_RESOUT	0x0002	/* RESETOUT Enable REGISTER */
#define PCM990_CTRL_RESGPIO	0x0004	/* RESETGPIO Enable REGISTER */

#define PCM990_CTRL_REG1	0x0002	/* Power REGISTER */
#define PCM990_CTRL_5VOFF	0x0001	/* Disable  5V Regulators */
#define PCM990_CTRL_CANPWR	0x0004	/* Enable CANPWR ADUM */
#define PCM990_CTRL_PM_5V	0x0008	/* Read 5V OK */

#define PCM990_CTRL_REG2	0x0004	/* LED REGISTER */
#define PCM990_CTRL_LEDPWR	0x0001	/* POWER LED enable */
#define PCM990_CTRL_LEDBAS	0x0002	/* BASIS LED enable */
#define PCM990_CTRL_LEDUSR	0x0004	/* USER LED enable */

#define PCM990_CTRL_REG3	0x0006	/* LCD CTRL REGISTER 3 */
#define PCM990_CTRL_LCDPWR	0x0001	/* RW LCD Power on */
#define PCM990_CTRL_LCDON	0x0002	/* RW LCD Latch on */
#define PCM990_CTRL_LCDPOS1	0x0004	/* RW POS 1 */
#define PCM990_CTRL_LCDPOS2	0x0008	/* RW POS 2 */

#define PCM990_CTRL_REG4	0x0008	/* MMC1 CTRL REGISTER 4 */
#define PCM990_CTRL_MMC1PWR	0x0001 /* RW MMC1 Power on */

#define PCM990_CTRL_REG5	0x000A	/* MMC2 CTRL REGISTER 5 */
#define PCM990_CTRL_MMC2PWR	0x0001	/* RW MMC2 Power on */
#define PCM990_CTRL_MMC2LED	0x0002	/* RW MMC2 LED */
#define PCM990_CTRL_MMC2DE	0x0004	/* R MMC2 Card detect */
#define PCM990_CTRL_MMC2WP	0x0008	/* R MMC2 Card write protect */

#define PCM990_CTRL_INTSETCLR	0x000C	/* Interrupt Clear REGISTER */
#define PCM990_CTRL_INTC0	0x0001	/* Clear Reg BT Detect */
#define PCM990_CTRL_INTC1	0x0002	/* Clear Reg FR RI */
#define PCM990_CTRL_INTC2	0x0004	/* Clear Reg MMC1 Detect */
#define PCM990_CTRL_INTC3	0x0008	/* Clear Reg PM_5V off */

#define PCM990_CTRL_INTMSKENA	0x000E	/* Interrupt Enable REGISTER */
#define PCM990_CTRL_ENAINT0	0x0001	/* Enable Int BT Detect */
#define PCM990_CTRL_ENAINT1	0x0002	/* Enable Int FR RI */
#define PCM990_CTRL_ENAINT2	0x0004	/* Enable Int MMC1 Detect */
#define PCM990_CTRL_ENAINT3	0x0008	/* Enable Int PM_5V off */

#define PCM990_CTRL_REG8	0x0014	/* Uart REGISTER */
#define PCM990_CTRL_FFSD	0x0001	/* BT Uart Enable */
#define PCM990_CTRL_BTSD	0x0002	/* FF Uart Enable */
#define PCM990_CTRL_FFRI	0x0004	/* FF Uart RI detect */
#define PCM990_CTRL_BTRX	0x0008	/* BT Uart Rx detect */

#define PCM990_CTRL_REG9	0x0010	/* AC97 Flash REGISTER */
#define PCM990_CTRL_FLWP	0x0001	/* pC Flash Write Protect */
#define PCM990_CTRL_FLDIS	0x0002	/* pC Flash Disable */
#define PCM990_CTRL_AC97ENA	0x0004	/* Enable AC97 Expansion */

#define PCM990_CTRL_REG10	0x0012	/* GPS-REGISTER */
#define PCM990_CTRL_GPSPWR	0x0004	/* GPS-Modul Power on */
#define PCM990_CTRL_GPSENA	0x0008	/* GPS-Modul Enable */

#define PCM990_CTRL_REG11	0x0014	/* Accu REGISTER */
#define PCM990_CTRL_ACENA	0x0001	/* Charge Enable */
#define PCM990_CTRL_ACSEL	0x0002	/* Charge Akku -> DC Enable */
#define PCM990_CTRL_ACPRES	0x0004	/* DC Present */
#define PCM990_CTRL_ACALARM	0x0008	/* Error Akku */

/*
 * IDE
 */
#define PCM990_IDE_IRQ_GPIO	13
#define PCM990_IDE_IRQ		PXA_GPIO_TO_IRQ(PCM990_IDE_IRQ_GPIO)
#define PCM990_IDE_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
#define PCM990_IDE_PLD_PHYS	0x20000000	/* 16 bit wide */
#define PCM990_IDE_PLD_BASE	0xee000000
#define PCM990_IDE_PLD_SIZE	(1*1024*1024)

/* visible CPLD (U6) registers */
#define PCM990_IDE_PLD_REG0	0x1000	/* OFFSET IDE REGISTER 0 */
#define PCM990_IDE_PM5V		0x0004	/* R System VCC_5V */
#define PCM990_IDE_STBY		0x0008	/* R System StandBy */

#define PCM990_IDE_PLD_REG1	0x1002	/* OFFSET IDE REGISTER 1 */
#define PCM990_IDE_IDEMODE	0x0001	/* R TrueIDE Mode */
#define PCM990_IDE_DMAENA	0x0004	/* RW DMA Enable */
#define PCM990_IDE_DMA1_0	0x0008	/* RW 1=DREQ1 0=DREQ0 */

#define PCM990_IDE_PLD_REG2	0x1004	/* OFFSET IDE REGISTER 2 */
#define PCM990_IDE_RESENA	0x0001	/* RW IDE Reset Bit enable */
#define PCM990_IDE_RES		0x0002	/* RW IDE Reset Bit */
#define PCM990_IDE_RDY		0x0008	/* RDY */

#define PCM990_IDE_PLD_REG3	0x1006	/* OFFSET IDE REGISTER 3 */
#define PCM990_IDE_IDEOE	0x0001	/* RW Latch on Databus */
#define PCM990_IDE_IDEON	0x0002	/* RW Latch on Control Address */
#define PCM990_IDE_IDEIN	0x0004	/* RW Latch on Interrupt usw. */

#define PCM990_IDE_PLD_REG4	0x1008	/* OFFSET IDE REGISTER 4 */
#define PCM990_IDE_PWRENA	0x0001	/* RW IDE Power enable */
#define PCM990_IDE_5V		0x0002	/* R IDE Power 5V */
#define PCM990_IDE_PWG		0x0008	/* R IDE Power is on */

#define PCM990_IDE_PLD_P2V(x) ((x) - PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_BASE)
#define PCM990_IDE_PLD_V2P(x) ((x) - PCM990_IDE_PLD_BASE + PCM990_IDE_PLD_PHYS)

/*
 * Compact Flash
 */
#define PCM990_CF_IRQ_GPIO	11
#define PCM990_CF_IRQ		PXA_GPIO_TO_IRQ(PCM990_CF_IRQ_GPIO)
#define PCM990_CF_IRQ_EDGE	IRQ_TYPE_EDGE_RISING

#define PCM990_CF_CD_GPIO	12
#define PCM990_CF_CD		PXA_GPIO_TO_IRQ(PCM990_CF_CD_GPIO)
#define PCM990_CF_CD_EDGE	IRQ_TYPE_EDGE_RISING

#define PCM990_CF_PLD_PHYS	0x30000000	/* 16 bit wide */

/* visible CPLD (U6) registers */
#define PCM990_CF_PLD_REG0	0x1000	/* OFFSET CF REGISTER 0 */
#define PCM990_CF_REG0_LED	0x0001	/* RW LED on */
#define PCM990_CF_REG0_BLK	0x0002	/* RW LED flash when access */
#define PCM990_CF_REG0_PM5V	0x0004	/* R System VCC_5V enable */
#define PCM990_CF_REG0_STBY	0x0008	/* R System StandBy */

#define PCM990_CF_PLD_REG1	0x1002	/* OFFSET CF REGISTER 1 */
#define PCM990_CF_REG1_IDEMODE	0x0001	/* RW CF card run as TrueIDE */
#define PCM990_CF_REG1_CF0	0x0002	/* RW CF card at ADDR 0x28000000 */

#define PCM990_CF_PLD_REG2	0x1004	/* OFFSET CF REGISTER 2 */
#define PCM990_CF_REG2_RES	0x0002	/* RW CF RESET BIT */
#define PCM990_CF_REG2_RDYENA	0x0004	/* RW Enable CF_RDY */
#define PCM990_CF_REG2_RDY	0x0008	/* R CF_RDY auf PWAIT */

#define PCM990_CF_PLD_REG3	0x1006	/* OFFSET CF REGISTER 3 */
#define PCM990_CF_REG3_CFOE	0x0001	/* RW Latch on Databus */
#define PCM990_CF_REG3_CFON	0x0002	/* RW Latch on Control Address */
#define PCM990_CF_REG3_CFIN	0x0004	/* RW Latch on Interrupt usw. */
#define PCM990_CF_REG3_CFCD	0x0008	/* RW Latch on CD1/2 VS1/2 usw */

#define PCM990_CF_PLD_REG4	0x1008	/* OFFSET CF REGISTER 4 */
#define PCM990_CF_REG4_PWRENA	0x0001	/* RW CF Power on (CD1/2 = "00") */
#define PCM990_CF_REG4_5_3V	0x0002	/* RW 1 = 5V CF_VCC 0 = 3 V CF_VCC */
#define PCM990_CF_REG4_3B	0x0004	/* RW 3.0V Backup from VCC (5_3V=0) */
#define PCM990_CF_REG4_PWG	0x0008	/* R CF-Power is on */

#define PCM990_CF_PLD_REG5	0x100A	/* OFFSET CF REGISTER 5 */
#define PCM990_CF_REG5_BVD1	0x0001	/* R CF /BVD1 */
#define PCM990_CF_REG5_BVD2	0x0002	/* R CF /BVD2 */
#define PCM990_CF_REG5_VS1	0x0004	/* R CF /VS1 */
#define PCM990_CF_REG5_VS2	0x0008	/* R CF /VS2 */

#define PCM990_CF_PLD_REG6	0x100C	/* OFFSET CF REGISTER 6 */
#define PCM990_CF_REG6_CD1	0x0001	/* R CF Card_Detect1 */
#define PCM990_CF_REG6_CD2	0x0002	/* R CF Card_Detect2 */

/*
 * Wolfson AC97 Touch
 */
#define PCM990_AC97_IRQ_GPIO	10
#define PCM990_AC97_IRQ		PXA_GPIO_TO_IRQ(PCM990_AC97_IRQ_GPIO)
#define PCM990_AC97_IRQ_EDGE	IRQ_TYPE_EDGE_RISING

/*
 * MMC phyCORE
 */
#define PCM990_MMC0_IRQ_GPIO	9
#define PCM990_MMC0_IRQ		PXA_GPIO_TO_IRQ(PCM990_MMC0_IRQ_GPIO)
#define PCM990_MMC0_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING

/*
 * USB phyCore
 */
#define PCM990_USB_OVERCURRENT (88 | GPIO_ALT_FN_1_IN)
#define PCM990_USB_PWR_EN (89 | GPIO_ALT_FN_2_OUT)
Commit	Line	Data
2e927b76	1	/*
a09e64fb	2	* arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
2e927b76 RS	3	*
	4	* (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
	5	* (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
	6	*
	7	* This program is free software; you can redistribute it and/or modify
	8	* it under the terms of the GNU General Public License as published by
	9	* the Free Software Foundation; either version 2 of the License, or
	10	* (at your option) any later version.
	11	*
	12	* This program is distributed in the hope that it will be useful,
	13	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	14	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	15	* GNU General Public License for more details.
	16	*
	17	* You should have received a copy of the GNU General Public License
	18	* along with this program; if not, write to the Free Software
	19	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	20	*/
	21
4c25c5d2 AB	22	#include "pcm027.h"
4c25c5d2 AB	23	#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
2e927b76 RS	24
	25	/*
	26	* definitions relevant only when the PCM-990
	27	* development base board is in use
	28	*/
	29
	30	/* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */
	31	#define PCM990_CTRL_INT_IRQ_GPIO 9
6384fdad	32	#define PCM990_CTRL_INT_IRQ PXA_GPIO_TO_IRQ(PCM990_CTRL_INT_IRQ_GPIO)
6cab4860	33	#define PCM990_CTRL_INT_IRQ_EDGE IRQ_TYPE_EDGE_RISING
2e927b76	34	#define PCM990_CTRL_PHYS PXA_CS1_PHYS /* 16-Bit */
2e927b76 RS	35	#define PCM990_CTRL_SIZE (110241024)
	36
	37	#define PCM990_CTRL_PWR_IRQ_GPIO 14
6384fdad	38	#define PCM990_CTRL_PWR_IRQ PXA_GPIO_TO_IRQ(PCM990_CTRL_PWR_IRQ_GPIO)
6cab4860	39	#define PCM990_CTRL_PWR_IRQ_EDGE IRQ_TYPE_EDGE_RISING
2e927b76 RS	40
	41	/* visible CPLD (U7) registers */
	42	#define PCM990_CTRL_REG0 0x0000 /* RESET REGISTER */
	43	#define PCM990_CTRL_SYSRES 0x0001 /* System RESET REGISTER */
	44	#define PCM990_CTRL_RESOUT 0x0002 /* RESETOUT Enable REGISTER */
	45	#define PCM990_CTRL_RESGPIO 0x0004 /* RESETGPIO Enable REGISTER */
	46
	47	#define PCM990_CTRL_REG1 0x0002 /* Power REGISTER */
	48	#define PCM990_CTRL_5VOFF 0x0001 /* Disable 5V Regulators */
	49	#define PCM990_CTRL_CANPWR 0x0004 /* Enable CANPWR ADUM */
	50	#define PCM990_CTRL_PM_5V 0x0008 /* Read 5V OK */
	51
	52	#define PCM990_CTRL_REG2 0x0004 /* LED REGISTER */
	53	#define PCM990_CTRL_LEDPWR 0x0001 /* POWER LED enable */
	54	#define PCM990_CTRL_LEDBAS 0x0002 /* BASIS LED enable */
	55	#define PCM990_CTRL_LEDUSR 0x0004 /* USER LED enable */
	56
	57	#define PCM990_CTRL_REG3 0x0006 /* LCD CTRL REGISTER 3 */
	58	#define PCM990_CTRL_LCDPWR 0x0001 /* RW LCD Power on */
	59	#define PCM990_CTRL_LCDON 0x0002 /* RW LCD Latch on */
	60	#define PCM990_CTRL_LCDPOS1 0x0004 /* RW POS 1 */
	61	#define PCM990_CTRL_LCDPOS2 0x0008 /* RW POS 2 */
	62
	63	#define PCM990_CTRL_REG4 0x0008 /* MMC1 CTRL REGISTER 4 */
	64	#define PCM990_CTRL_MMC1PWR 0x0001 /* RW MMC1 Power on */
	65
	66	#define PCM990_CTRL_REG5 0x000A /* MMC2 CTRL REGISTER 5 */
	67	#define PCM990_CTRL_MMC2PWR 0x0001 /* RW MMC2 Power on */
	68	#define PCM990_CTRL_MMC2LED 0x0002 /* RW MMC2 LED */
	69	#define PCM990_CTRL_MMC2DE 0x0004 /* R MMC2 Card detect */
	70	#define PCM990_CTRL_MMC2WP 0x0008 /* R MMC2 Card write protect */
	71
b298322b	72	#define PCM990_CTRL_INTSETCLR 0x000C /* Interrupt Clear REGISTER */
2e927b76 RS	73	#define PCM990_CTRL_INTC0 0x0001 /* Clear Reg BT Detect */
	74	#define PCM990_CTRL_INTC1 0x0002 /* Clear Reg FR RI */
	75	#define PCM990_CTRL_INTC2 0x0004 /* Clear Reg MMC1 Detect */
	76	#define PCM990_CTRL_INTC3 0x0008 /* Clear Reg PM_5V off */
	77
b298322b	78	#define PCM990_CTRL_INTMSKENA 0x000E /* Interrupt Enable REGISTER */
2e927b76 RS	79	#define PCM990_CTRL_ENAINT0 0x0001 /* Enable Int BT Detect */
	80	#define PCM990_CTRL_ENAINT1 0x0002 /* Enable Int FR RI */
	81	#define PCM990_CTRL_ENAINT2 0x0004 /* Enable Int MMC1 Detect */
	82	#define PCM990_CTRL_ENAINT3 0x0008 /* Enable Int PM_5V off */
	83
	84	#define PCM990_CTRL_REG8 0x0014 /* Uart REGISTER */
	85	#define PCM990_CTRL_FFSD 0x0001 /* BT Uart Enable */
	86	#define PCM990_CTRL_BTSD 0x0002 /* FF Uart Enable */
	87	#define PCM990_CTRL_FFRI 0x0004 /* FF Uart RI detect */
	88	#define PCM990_CTRL_BTRX 0x0008 /* BT Uart Rx detect */
	89
	90	#define PCM990_CTRL_REG9 0x0010 /* AC97 Flash REGISTER */
	91	#define PCM990_CTRL_FLWP 0x0001 /* pC Flash Write Protect */
	92	#define PCM990_CTRL_FLDIS 0x0002 /* pC Flash Disable */
	93	#define PCM990_CTRL_AC97ENA 0x0004 /* Enable AC97 Expansion */
	94
	95	#define PCM990_CTRL_REG10 0x0012 /* GPS-REGISTER */
	96	#define PCM990_CTRL_GPSPWR 0x0004 /* GPS-Modul Power on */
	97	#define PCM990_CTRL_GPSENA 0x0008 /* GPS-Modul Enable */
	98
	99	#define PCM990_CTRL_REG11 0x0014 /* Accu REGISTER */
	100	#define PCM990_CTRL_ACENA 0x0001 /* Charge Enable */
	101	#define PCM990_CTRL_ACSEL 0x0002 /* Charge Akku -> DC Enable */
	102	#define PCM990_CTRL_ACPRES 0x0004 /* DC Present */
	103	#define PCM990_CTRL_ACALARM 0x0008 /* Error Akku */
	104
2e927b76 RS	105	/*
	106	* IDE
	107	*/
	108	#define PCM990_IDE_IRQ_GPIO 13
6384fdad	109	#define PCM990_IDE_IRQ PXA_GPIO_TO_IRQ(PCM990_IDE_IRQ_GPIO)
6cab4860	110	#define PCM990_IDE_IRQ_EDGE IRQ_TYPE_EDGE_RISING
2e927b76 RS	111	#define PCM990_IDE_PLD_PHYS 0x20000000 /* 16 bit wide */
	112	#define PCM990_IDE_PLD_BASE 0xee000000
	113	#define PCM990_IDE_PLD_SIZE (110241024)
	114
	115	/* visible CPLD (U6) registers */
	116	#define PCM990_IDE_PLD_REG0 0x1000 /* OFFSET IDE REGISTER 0 */
	117	#define PCM990_IDE_PM5V 0x0004 /* R System VCC_5V */
	118	#define PCM990_IDE_STBY 0x0008 /* R System StandBy */
	119
	120	#define PCM990_IDE_PLD_REG1 0x1002 /* OFFSET IDE REGISTER 1 */
	121	#define PCM990_IDE_IDEMODE 0x0001 /* R TrueIDE Mode */
	122	#define PCM990_IDE_DMAENA 0x0004 /* RW DMA Enable */
	123	#define PCM990_IDE_DMA1_0 0x0008 /* RW 1=DREQ1 0=DREQ0 */
	124
	125	#define PCM990_IDE_PLD_REG2 0x1004 /* OFFSET IDE REGISTER 2 */
	126	#define PCM990_IDE_RESENA 0x0001 /* RW IDE Reset Bit enable */
	127	#define PCM990_IDE_RES 0x0002 /* RW IDE Reset Bit */
	128	#define PCM990_IDE_RDY 0x0008 /* RDY */
	129
	130	#define PCM990_IDE_PLD_REG3 0x1006 /* OFFSET IDE REGISTER 3 */
	131	#define PCM990_IDE_IDEOE 0x0001 /* RW Latch on Databus */
	132	#define PCM990_IDE_IDEON 0x0002 /* RW Latch on Control Address */
	133	#define PCM990_IDE_IDEIN 0x0004 /* RW Latch on Interrupt usw. */
	134
	135	#define PCM990_IDE_PLD_REG4 0x1008 /* OFFSET IDE REGISTER 4 */
	136	#define PCM990_IDE_PWRENA 0x0001 /* RW IDE Power enable */
	137	#define PCM990_IDE_5V 0x0002 /* R IDE Power 5V */
	138	#define PCM990_IDE_PWG 0x0008 /* R IDE Power is on */
	139
	140	#define PCM990_IDE_PLD_P2V(x) ((x) - PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_BASE)
	141	#define PCM990_IDE_PLD_V2P(x) ((x) - PCM990_IDE_PLD_BASE + PCM990_IDE_PLD_PHYS)
	142
2e927b76 RS	143	/*
	144	* Compact Flash
	145	*/
	146	#define PCM990_CF_IRQ_GPIO 11
6384fdad	147	#define PCM990_CF_IRQ PXA_GPIO_TO_IRQ(PCM990_CF_IRQ_GPIO)
6cab4860	148	#define PCM990_CF_IRQ_EDGE IRQ_TYPE_EDGE_RISING
2e927b76 RS	149
2e927b76 RS	150	#define PCM990_CF_CD_GPIO 12
6384fdad	151	#define PCM990_CF_CD PXA_GPIO_TO_IRQ(PCM990_CF_CD_GPIO)
6cab4860	152	#define PCM990_CF_CD_EDGE IRQ_TYPE_EDGE_RISING
2e927b76 RS	153
2e927b76 RS	154	#define PCM990_CF_PLD_PHYS 0x30000000 /* 16 bit wide */
2e927b76 RS	155
	156	/* visible CPLD (U6) registers */
	157	#define PCM990_CF_PLD_REG0 0x1000 /* OFFSET CF REGISTER 0 */
	158	#define PCM990_CF_REG0_LED 0x0001 /* RW LED on */
	159	#define PCM990_CF_REG0_BLK 0x0002 /* RW LED flash when access */
	160	#define PCM990_CF_REG0_PM5V 0x0004 /* R System VCC_5V enable */
	161	#define PCM990_CF_REG0_STBY 0x0008 /* R System StandBy */
	162
	163	#define PCM990_CF_PLD_REG1 0x1002 /* OFFSET CF REGISTER 1 */
	164	#define PCM990_CF_REG1_IDEMODE 0x0001 /* RW CF card run as TrueIDE */
	165	#define PCM990_CF_REG1_CF0 0x0002 /* RW CF card at ADDR 0x28000000 */
	166
	167	#define PCM990_CF_PLD_REG2 0x1004 /* OFFSET CF REGISTER 2 */
	168	#define PCM990_CF_REG2_RES 0x0002 /* RW CF RESET BIT */
	169	#define PCM990_CF_REG2_RDYENA 0x0004 /* RW Enable CF_RDY */
	170	#define PCM990_CF_REG2_RDY 0x0008 /* R CF_RDY auf PWAIT */
	171
	172	#define PCM990_CF_PLD_REG3 0x1006 /* OFFSET CF REGISTER 3 */
	173	#define PCM990_CF_REG3_CFOE 0x0001 /* RW Latch on Databus */
	174	#define PCM990_CF_REG3_CFON 0x0002 /* RW Latch on Control Address */
	175	#define PCM990_CF_REG3_CFIN 0x0004 /* RW Latch on Interrupt usw. */
	176	#define PCM990_CF_REG3_CFCD 0x0008 /* RW Latch on CD1/2 VS1/2 usw */
	177
	178	#define PCM990_CF_PLD_REG4 0x1008 /* OFFSET CF REGISTER 4 */
	179	#define PCM990_CF_REG4_PWRENA 0x0001 /* RW CF Power on (CD1/2 = "00") */
	180	#define PCM990_CF_REG4_5_3V 0x0002 /* RW 1 = 5V CF_VCC 0 = 3 V CF_VCC */
	181	#define PCM990_CF_REG4_3B 0x0004 /* RW 3.0V Backup from VCC (5_3V=0) */
	182	#define PCM990_CF_REG4_PWG 0x0008 /* R CF-Power is on */
	183
	184	#define PCM990_CF_PLD_REG5 0x100A /* OFFSET CF REGISTER 5 */
	185	#define PCM990_CF_REG5_BVD1 0x0001 /* R CF /BVD1 */
	186	#define PCM990_CF_REG5_BVD2 0x0002 /* R CF /BVD2 */
	187	#define PCM990_CF_REG5_VS1 0x0004 /* R CF /VS1 */
	188	#define PCM990_CF_REG5_VS2 0x0008 /* R CF /VS2 */
	189
	190	#define PCM990_CF_PLD_REG6 0x100C /* OFFSET CF REGISTER 6 */
	191	#define PCM990_CF_REG6_CD1 0x0001 /* R CF Card_Detect1 */
	192	#define PCM990_CF_REG6_CD2 0x0002 /* R CF Card_Detect2 */
	193
2e927b76 RS	194	/*
	195	* Wolfson AC97 Touch
	196	*/
	197	#define PCM990_AC97_IRQ_GPIO 10
6384fdad	198	#define PCM990_AC97_IRQ PXA_GPIO_TO_IRQ(PCM990_AC97_IRQ_GPIO)
6cab4860	199	#define PCM990_AC97_IRQ_EDGE IRQ_TYPE_EDGE_RISING
2e927b76 RS	200
	201	/*
	202	* MMC phyCORE
	203	*/
	204	#define PCM990_MMC0_IRQ_GPIO 9
6384fdad	205	#define PCM990_MMC0_IRQ PXA_GPIO_TO_IRQ(PCM990_MMC0_IRQ_GPIO)
6cab4860	206	#define PCM990_MMC0_IRQ_EDGE IRQ_TYPE_EDGE_FALLING
2e927b76 RS	207
	208	/*
	209	* USB phyCore
	210	*/
	211	#define PCM990_USB_OVERCURRENT (88 \| GPIO_ALT_FN_1_IN)
	212	#define PCM990_USB_PWR_EN (89 \| GPIO_ALT_FN_2_OUT)