[linux-2.6-block.git] / arch / arm / mach-pxa / pcm027.c

// SPDX-License-Identifier: GPL-2.0-only
/*
 *  linux/arch/arm/mach-pxa/pcm027.c
 *  Support for the Phytec phyCORE-PXA270 CPU card (aka PCM-027).
 *
 *  Refer
 *   http://www.phytec.com/products/sbc/ARM-XScale/phyCORE-XScale-PXA270.html
 *  for additional hardware info
 *
 *  Author:	Juergen Kilb
 *  Created:	April 05, 2005
 *  Copyright:	Phytec Messtechnik GmbH
 *  e-Mail:	armlinux@phytec.de
 *
 *  based on Intel Mainstone Board
 *
 *  Copyright 2007 Juergen Beisert @ Pengutronix (j.beisert@pengutronix.de)
 */

#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/spi/max7301.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/leds.h>

#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include "pxa27x.h"
#include "pcm027.h"
#include "generic.h"

/*
 * ABSTRACT:
 *
 * The PXA270 processor comes with a bunch of hardware on its silicon.
 * Not all of this hardware can be used at the same time and not all
 * is routed to module's connectors. Also it depends on the baseboard, what
 * kind of hardware can be used in which way.
 * -> So this file supports the main devices on the CPU card only!
 * Refer pcm990-baseboard.c how to extend this features to get a full
 * blown system with many common interfaces.
 *
 * The PCM-027 supports the following interfaces through its connectors and
 * will be used in pcm990-baseboard.c:
 *
 * - LCD support
 * - MMC support
 * - IDE/CF card
 * - FFUART
 * - BTUART
 * - IRUART
 * - AC97
 * - SSP
 * - SSP3
 *
 * Claimed GPIOs:
 * GPIO0 -> IRQ input from RTC
 * GPIO2 -> SYS_ENA*)
 * GPIO3 -> PWR_SCL
 * GPIO4 -> PWR_SDA
 * GPIO5 -> PowerCap0*)
 * GPIO6 -> PowerCap1*)
 * GPIO7 -> PowerCap2*)
 * GPIO8 -> PowerCap3*)
 * GPIO15 -> /CS1
 * GPIO20 -> /CS2
 * GPIO21 -> /CS3
 * GPIO33 -> /CS5 network controller select
 * GPIO52 -> IRQ from network controller
 * GPIO78 -> /CS2
 * GPIO80 -> /CS4
 * GPIO90 -> LED0
 * GPIO91 -> LED1
 * GPIO114 -> IRQ from CAN controller
 * GPIO117 -> SCL
 * GPIO118 -> SDA
 *
 * *) CPU internal use only
 */

static unsigned long pcm027_pin_config[] __initdata = {
	/* Chip Selects */
	GPIO20_nSDCS_2,
	GPIO21_nSDCS_3,
	GPIO15_nCS_1,
	GPIO78_nCS_2,
	GPIO80_nCS_4,
	GPIO33_nCS_5,	/* Ethernet */

	/* I2C */
	GPIO117_I2C_SCL,
	GPIO118_I2C_SDA,

	/* GPIO */
	GPIO52_GPIO,	/* IRQ from network controller */
#ifdef CONFIG_LEDS_GPIO
	GPIO90_GPIO,	/* PCM027_LED_CPU */
	GPIO91_GPIO,	/* PCM027_LED_HEART_BEAT */
#endif
	GPIO114_GPIO,	/* IRQ from CAN controller */
};

/*
 * SMC91x network controller specific stuff
 */
static struct resource smc91x_resources[] = {
	[0] = {
		.start	= PCM027_ETH_PHYS + 0x300,
		.end	= PCM027_ETH_PHYS + PCM027_ETH_SIZE,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.start	= PCM027_ETH_IRQ,
		.end	= PCM027_ETH_IRQ,
		/* note: smc91x's driver doesn't use the trigger bits yet */
		.flags	= IORESOURCE_IRQ | PCM027_ETH_IRQ_EDGE,
	}
};

static struct platform_device smc91x_device = {
	.name		= "smc91x",
	.id		= 0,
	.num_resources	= ARRAY_SIZE(smc91x_resources),
	.resource	= smc91x_resources,
};

/*
 * SPI host and devices
 */
static struct pxa2xx_spi_controller pxa_ssp_master_info = {
	.num_chipselect	= 1,
};

static struct max7301_platform_data max7301_info = {
	.base = -1,
};

/* bus_num must match id in pxa2xx_set_spi_info() call */
static struct spi_board_info spi_board_info[] __initdata = {
	{
		.modalias	= "max7301",
		.platform_data	= &max7301_info,
		.max_speed_hz	= 13000000,
		.bus_num	= 1,
		.chip_select	= 0,
		.mode		= SPI_MODE_0,
	},
};

/*
 * NOR flash
 */
static struct physmap_flash_data pcm027_flash_data = {
	.width  = 4,
};

static struct resource pcm027_flash_resource = {
	.start          = PCM027_FLASH_PHYS,
	.end            = PCM027_FLASH_PHYS + PCM027_FLASH_SIZE - 1 ,
	.flags          = IORESOURCE_MEM,
};

static struct platform_device pcm027_flash = {
	.name           = "physmap-flash",
	.id             = 0,
	.dev            = {
		.platform_data  = &pcm027_flash_data,
	},
	.resource       = &pcm027_flash_resource,
	.num_resources  = 1,
};

#ifdef CONFIG_LEDS_GPIO

static struct gpio_led pcm027_led[] = {
	{
		.name = "led0:red",	/* FIXME */
		.gpio = PCM027_LED_CPU
	},
	{
		.name = "led1:green",	/* FIXME */
		.gpio = PCM027_LED_HEARD_BEAT
	},
};

static struct gpio_led_platform_data pcm027_led_data = {
	.num_leds	= ARRAY_SIZE(pcm027_led),
	.leds		= pcm027_led
};

static struct platform_device pcm027_led_dev = {
	.name		= "leds-gpio",
	.id		= 0,
	.dev		= {
		.platform_data	= &pcm027_led_data,
	},
};

#endif /* CONFIG_LEDS_GPIO */

/*
 * declare the available device resources on this board
 */
static struct platform_device *devices[] __initdata = {
	&smc91x_device,
	&pcm027_flash,
#ifdef CONFIG_LEDS_GPIO
	&pcm027_led_dev
#endif
};

/*
 * pcm027_init - breath some life into the board
 */
static void __init pcm027_init(void)
{
	/* system bus arbiter setting
	 * - Core_Park
	 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
	 */
	ARB_CNTRL = ARB_CORE_PARK | 0x234;

	pxa2xx_mfp_config(pcm027_pin_config, ARRAY_SIZE(pcm027_pin_config));

	pxa_set_ffuart_info(NULL);
	pxa_set_btuart_info(NULL);
	pxa_set_stuart_info(NULL);

	platform_add_devices(devices, ARRAY_SIZE(devices));

	/* at last call the baseboard to initialize itself */
#ifdef CONFIG_MACH_PCM990_BASEBOARD
	pcm990_baseboard_init();
#endif

	pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
}

static void __init pcm027_map_io(void)
{
	pxa27x_map_io();

	/* initialize sleep mode regs (wake-up sources, etc) */
	PGSR0 = 0x01308000;
	PGSR1 = 0x00CF0002;
	PGSR2 = 0x0E294000;
	PGSR3 = 0x0000C000;
	PWER  = 0x40000000 | PWER_GPIO0 | PWER_GPIO1;
	PRER  = 0x00000000;
	PFER  = 0x00000003;
}

MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270")
	/* Maintainer: Pengutronix */
	.atag_offset	= 0x100,
	.map_io		= pcm027_map_io,
	.nr_irqs	= PCM027_NR_IRQS,
	.init_irq	= pxa27x_init_irq,
	.handle_irq	= pxa27x_handle_irq,
	.init_time	= pxa_timer_init,
	.init_machine	= pcm027_init,
	.restart	= pxa_restart,
MACHINE_END
Commit	Line	Data
d2912cb1	1	// SPDX-License-Identifier: GPL-2.0-only
34e31d87 RS	2	/*
	3	* linux/arch/arm/mach-pxa/pcm027.c
	4	* Support for the Phytec phyCORE-PXA270 CPU card (aka PCM-027).
	5	*
	6	* Refer
	7	* http://www.phytec.com/products/sbc/ARM-XScale/phyCORE-XScale-PXA270.html
	8	* for additional hardware info
	9	*
	10	* Author: Juergen Kilb
	11	* Created: April 05, 2005
	12	* Copyright: Phytec Messtechnik GmbH
	13	* e-Mail: armlinux@phytec.de
	14	*
	15	* based on Intel Mainstone Board
	16	*
	17	* Copyright 2007 Juergen Beisert @ Pengutronix (j.beisert@pengutronix.de)
34e31d87 RS	18	*/
	19
	20	#include <linux/irq.h>
	21	#include <linux/platform_device.h>
	22	#include <linux/mtd/physmap.h>
	23	#include <linux/spi/spi.h>
e172274c	24	#include <linux/spi/max7301.h>
8348c259	25	#include <linux/spi/pxa2xx_spi.h>
34e31d87	26	#include <linux/leds.h>
e172274c	27
34e31d87 RS	28	#include <asm/mach-types.h>
34e31d87 RS	29	#include <asm/mach/arch.h>
4c25c5d2 AB	30	#include "pxa27x.h"
4c25c5d2 AB	31	#include "pcm027.h"
34e31d87 RS	32	#include "generic.h"
	33
	34	/*
	35	* ABSTRACT:
	36	*
	37	* The PXA270 processor comes with a bunch of hardware on its silicon.
	38	* Not all of this hardware can be used at the same time and not all
	39	* is routed to module's connectors. Also it depends on the baseboard, what
	40	* kind of hardware can be used in which way.
	41	* -> So this file supports the main devices on the CPU card only!
	42	* Refer pcm990-baseboard.c how to extend this features to get a full
	43	* blown system with many common interfaces.
	44	*
	45	* The PCM-027 supports the following interfaces through its connectors and
	46	* will be used in pcm990-baseboard.c:
	47	*
	48	* - LCD support
	49	* - MMC support
	50	* - IDE/CF card
	51	* - FFUART
	52	* - BTUART
	53	* - IRUART
	54	* - AC97
	55	* - SSP
	56	* - SSP3
	57	*
	58	* Claimed GPIOs:
	59	* GPIO0 -> IRQ input from RTC
	60	* GPIO2 -> SYS_ENA*)
	61	* GPIO3 -> PWR_SCL
	62	* GPIO4 -> PWR_SDA
	63	* GPIO5 -> PowerCap0*)
	64	* GPIO6 -> PowerCap1*)
	65	* GPIO7 -> PowerCap2*)
	66	* GPIO8 -> PowerCap3*)
	67	* GPIO15 -> /CS1
	68	* GPIO20 -> /CS2
	69	* GPIO21 -> /CS3
	70	* GPIO33 -> /CS5 network controller select
	71	* GPIO52 -> IRQ from network controller
	72	* GPIO78 -> /CS2
	73	* GPIO80 -> /CS4
	74	* GPIO90 -> LED0
	75	* GPIO91 -> LED1
	76	* GPIO114 -> IRQ from CAN controller
	77	* GPIO117 -> SCL
	78	* GPIO118 -> SDA
	79	*
	80	* *) CPU internal use only
	81	*/
	82
65172659 EM	83	static unsigned long pcm027_pin_config[] __initdata = {
	84	/* Chip Selects */
	85	GPIO20_nSDCS_2,
	86	GPIO21_nSDCS_3,
	87	GPIO15_nCS_1,
	88	GPIO78_nCS_2,
	89	GPIO80_nCS_4,
	90	GPIO33_nCS_5, /* Ethernet */
	91
	92	/* I2C */
	93	GPIO117_I2C_SCL,
	94	GPIO118_I2C_SDA,
	95
	96	/* GPIO */
	97	GPIO52_GPIO, /* IRQ from network controller */
	98	#ifdef CONFIG_LEDS_GPIO
	99	GPIO90_GPIO, /* PCM027_LED_CPU */
	100	GPIO91_GPIO, /* PCM027_LED_HEART_BEAT */
	101	#endif
	102	GPIO114_GPIO, /* IRQ from CAN controller */
	103	};
	104
34e31d87 RS	105	/*
	106	* SMC91x network controller specific stuff
	107	*/
	108	static struct resource smc91x_resources[] = {
	109	[0] = {
	110	.start = PCM027_ETH_PHYS + 0x300,
	111	.end = PCM027_ETH_PHYS + PCM027_ETH_SIZE,
	112	.flags = IORESOURCE_MEM,
	113	},
	114	[1] = {
	115	.start = PCM027_ETH_IRQ,
	116	.end = PCM027_ETH_IRQ,
	117	/* note: smc91x's driver doesn't use the trigger bits yet */
	118	.flags = IORESOURCE_IRQ \| PCM027_ETH_IRQ_EDGE,
	119	}
	120	};
	121
	122	static struct platform_device smc91x_device = {
	123	.name = "smc91x",
	124	.id = 0,
	125	.num_resources = ARRAY_SIZE(smc91x_resources),
	126	.resource = smc91x_resources,
	127	};
	128
e172274c GL	129	/*
	130	* SPI host and devices
	131	*/
51eea52d	132	static struct pxa2xx_spi_controller pxa_ssp_master_info = {
e172274c GL	133	.num_chipselect = 1,
	134	};
	135
	136	static struct max7301_platform_data max7301_info = {
	137	.base = -1,
	138	};
	139
	140	/* bus_num must match id in pxa2xx_set_spi_info() call */
	141	static struct spi_board_info spi_board_info[] __initdata = {
	142	{
	143	.modalias = "max7301",
	144	.platform_data = &max7301_info,
	145	.max_speed_hz = 13000000,
	146	.bus_num = 1,
	147	.chip_select = 0,
	148	.mode = SPI_MODE_0,
	149	},
	150	};
	151
	152	/*
	153	* NOR flash
	154	*/
34e31d87 RS	155	static struct physmap_flash_data pcm027_flash_data = {
	156	.width = 4,
	157	};
	158
	159	static struct resource pcm027_flash_resource = {
	160	.start = PCM027_FLASH_PHYS,
	161	.end = PCM027_FLASH_PHYS + PCM027_FLASH_SIZE - 1 ,
	162	.flags = IORESOURCE_MEM,
	163	};
	164
	165	static struct platform_device pcm027_flash = {
	166	.name = "physmap-flash",
	167	.id = 0,
	168	.dev = {
	169	.platform_data = &pcm027_flash_data,
	170	},
	171	.resource = &pcm027_flash_resource,
	172	.num_resources = 1,
	173	};
	174
	175	#ifdef CONFIG_LEDS_GPIO
	176
	177	static struct gpio_led pcm027_led[] = {
	178	{
	179	.name = "led0:red", /* FIXME */
	180	.gpio = PCM027_LED_CPU
	181	},
	182	{
	183	.name = "led1:green", /* FIXME */
	184	.gpio = PCM027_LED_HEARD_BEAT
	185	},
	186	};
	187
	188	static struct gpio_led_platform_data pcm027_led_data = {
	189	.num_leds = ARRAY_SIZE(pcm027_led),
	190	.leds = pcm027_led
	191	};
	192
	193	static struct platform_device pcm027_led_dev = {
	194	.name = "leds-gpio",
	195	.id = 0,
	196	.dev = {
	197	.platform_data = &pcm027_led_data,
	198	},
	199	};
	200
	201	#endif /* CONFIG_LEDS_GPIO */
	202
	203	/*
	204	* declare the available device resources on this board
	205	*/
	206	static struct platform_device *devices[] __initdata = {
	207	&smc91x_device,
	208	&pcm027_flash,
	209	#ifdef CONFIG_LEDS_GPIO
	210	&pcm027_led_dev
	211	#endif
	212	};
	213
	214	/*
	215	* pcm027_init - breath some life into the board
	216	*/
	217	static void __init pcm027_init(void)
	218	{
219	/* system bus arbiter setting
220	* - Core_Park
221	* - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
222	*/
223	ARB_CNTRL = ARB_CORE_PARK \| 0x234;
224
65172659	225	pxa2xx_mfp_config(pcm027_pin_config, ARRAY_SIZE(pcm027_pin_config));
34e31d87	226
cc155c6f RK	227	pxa_set_ffuart_info(NULL);
	228	pxa_set_btuart_info(NULL);
	229	pxa_set_stuart_info(NULL);
	230
65172659	231	platform_add_devices(devices, ARRAY_SIZE(devices));
34e31d87 RS	232
	233	/* at last call the baseboard to initialize itself */
	234	#ifdef CONFIG_MACH_PCM990_BASEBOARD
	235	pcm990_baseboard_init();
	236	#endif
e172274c GL	237
	238	pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
	239	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
34e31d87 RS	240	}
	241
	242	static void __init pcm027_map_io(void)
	243	{
851982c1	244	pxa27x_map_io();
34e31d87 RS	245
	246	/* initialize sleep mode regs (wake-up sources, etc) */
	247	PGSR0 = 0x01308000;
	248	PGSR1 = 0x00CF0002;
	249	PGSR2 = 0x0E294000;
	250	PGSR3 = 0x0000C000;
	251	PWER = 0x40000000 \| PWER_GPIO0 \| PWER_GPIO1;
	252	PRER = 0x00000000;
	253	PFER = 0x00000003;
	254	}
	255
	256	MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270")
	257	/* Maintainer: Pengutronix */
7375aba6	258	.atag_offset = 0x100,
34e31d87	259	.map_io = pcm027_map_io,
6ac6b817	260	.nr_irqs = PCM027_NR_IRQS,
34e31d87	261	.init_irq = pxa27x_init_irq,
8a97ae2f	262	.handle_irq = pxa27x_handle_irq,
6bb27d73	263	.init_time = pxa_timer_init,
34e31d87	264	.init_machine = pcm027_init,
271a74fc	265	.restart = pxa_restart,
34e31d87	266	MACHINE_END