projects / linux-2.6-block.git / blame
| Commit | Line | Data |
|---|---|---|
| 1da177e4 | 1 | /* |
| a09e64fb | 2 | * arch/arm/mach-pxa/include/mach/pxa-regs.h |
| 1da177e4 LT |
3 | * |
| 4 | * Author: Nicolas Pitre | |
| 5 | * Created: Jun 15, 2001 | |
| 6 | * Copyright: MontaVista Software Inc. | |
| 7 | * | |
| 8 | * This program is free software; you can redistribute it and/or modify | |
| 9 | * it under the terms of the GNU General Public License version 2 as | |
| 10 | * published by the Free Software Foundation. | |
| 11 | */ | |
| 12 | ||
| 13 | #ifndef __PXA_REGS_H | |
| 14 | #define __PXA_REGS_H | |
| 15 | ||
| 1da177e4 LT |
16 | |
| 17 | /* | |
| 18 | * PXA Chip selects | |
| 19 | */ | |
| 20 | ||
| 21 | #define PXA_CS0_PHYS 0x00000000 | |
| 22 | #define PXA_CS1_PHYS 0x04000000 | |
| 23 | #define PXA_CS2_PHYS 0x08000000 | |
| 24 | #define PXA_CS3_PHYS 0x0C000000 | |
| 25 | #define PXA_CS4_PHYS 0x10000000 | |
| 26 | #define PXA_CS5_PHYS 0x14000000 | |
| 27 | ||
| 28 | ||
| 29 | /* | |
| 30 | * Personal Computer Memory Card International Association (PCMCIA) sockets | |
| 31 | */ | |
| 32 | ||
| 33 | #define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */ | |
| 34 | #define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */ | |
| 35 | #define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */ | |
| 36 | #define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */ | |
| 37 | #define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */ | |
| 38 | ||
| 39 | #define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */ | |
| 40 | #define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */ | |
| 41 | #define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */ | |
| 42 | #define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */ | |
| 43 | ||
| 44 | #define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */ | |
| 45 | #define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */ | |
| 46 | #define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */ | |
| 47 | #define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */ | |
| 48 | ||
| 49 | #define _PCMCIA(Nb) /* PCMCIA [0..1] */ \ | |
| 50 | (0x20000000 + (Nb)*PCMCIASp) | |
| 51 | #define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */ | |
| 52 | #define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \ | |
| 53 | (_PCMCIA (Nb) + 2*PCMCIAPrtSp) | |
| 54 | #define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \ | |
| 55 | (_PCMCIA (Nb) + 3*PCMCIAPrtSp) | |
| 56 | ||
| 57 | #define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */ | |
| 58 | #define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */ | |
| 59 | #define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */ | |
| 60 | #define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */ | |
| 61 | ||
| 62 | #define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */ | |
| 63 | #define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */ | |
| 64 | #define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */ | |
| 65 | #define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */ | |
| 66 | ||
| 67 | ||
| 68 | ||
| 69 | /* | |
| 70 | * DMA Controller | |
| 71 | */ | |
| 1da177e4 LT |
72 | #define DCSR(x) __REG2(0x40000000, (x) << 2) |
| 73 | ||
| 74 | #define DCSR_RUN (1 << 31) /* Run Bit (read / write) */ | |
| 75 | #define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */ | |
| 76 | #define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */ | |
| cbd18f8e EM |
77 | #define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */ |
| 78 | #define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */ | |
| 79 | #define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */ | |
| 80 | #define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */ | |
| 81 | #define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */ | |
| 82 | ||
| 83 | #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) | |
| 1da177e4 LT |
84 | #define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */ |
| 85 | #define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ | |
| 86 | #define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ | |
| 87 | #define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */ | |
| 88 | #define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */ | |
| 89 | #define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */ | |
| 127e477e | 90 | #define DCSR_EORINTR (1 << 9) /* The end of Receive */ |
| 1da177e4 | 91 | #endif |
| 1da177e4 | 92 | |
| 68477d11 | 93 | #define DALGN __REG(0x400000a0) /* DMA Alignment Register */ |
| 1da177e4 LT |
94 | #define DINT __REG(0x400000f0) /* DMA Interrupt Register */ |
| 95 | ||
| 7267d1cc | 96 | #define DRCMR(n) (*(((n) < 64) ? \ |
| 97 | &__REG2(0x40000100, ((n) & 0x3f) << 2) : \ | |
| 98 | &__REG2(0x40001100, ((n) & 0x3f) << 2))) | |
| 99 | ||
| 1da177e4 LT |
100 | #define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */ |
| 101 | #define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */ | |
| 102 | ||
| 1da177e4 LT |
103 | #define DDADR(x) __REG2(0x40000200, (x) << 4) |
| 104 | #define DSADR(x) __REG2(0x40000204, (x) << 4) | |
| 105 | #define DTADR(x) __REG2(0x40000208, (x) << 4) | |
| 106 | #define DCMD(x) __REG2(0x4000020c, (x) << 4) | |
| 107 | ||
| 108 | #define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */ | |
| 109 | #define DDADR_STOP (1 << 0) /* Stop (read / write) */ | |
| 110 | ||
| 111 | #define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */ | |
| 112 | #define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */ | |
| 113 | #define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */ | |
| 114 | #define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */ | |
| 115 | #define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ | |
| 116 | #define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */ | |
| 117 | #define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */ | |
| 118 | #define DCMD_BURST8 (1 << 16) /* 8 byte burst */ | |
| 119 | #define DCMD_BURST16 (2 << 16) /* 16 byte burst */ | |
| 120 | #define DCMD_BURST32 (3 << 16) /* 32 byte burst */ | |
| 121 | #define DCMD_WIDTH1 (1 << 14) /* 1 byte width */ | |
| 122 | #define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */ | |
| 123 | #define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */ | |
| 124 | #define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ | |
| 125 | ||
| 126 | ||
| 127 | /* | |
| 128 | * UARTs | |
| 129 | */ | |
| 130 | ||
| 131 | /* Full Function UART (FFUART) */ | |
| 132 | #define FFUART FFRBR | |
| 133 | #define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */ | |
| 134 | #define FFTHR __REG(0x40100000) /* Transmit Holding Register (write only) */ | |
| 135 | #define FFIER __REG(0x40100004) /* Interrupt Enable Register (read/write) */ | |
| 136 | #define FFIIR __REG(0x40100008) /* Interrupt ID Register (read only) */ | |
| 137 | #define FFFCR __REG(0x40100008) /* FIFO Control Register (write only) */ | |
| 138 | #define FFLCR __REG(0x4010000C) /* Line Control Register (read/write) */ | |
| 139 | #define FFMCR __REG(0x40100010) /* Modem Control Register (read/write) */ | |
| 140 | #define FFLSR __REG(0x40100014) /* Line Status Register (read only) */ | |
| 141 | #define FFMSR __REG(0x40100018) /* Modem Status Register (read only) */ | |
| 142 | #define FFSPR __REG(0x4010001C) /* Scratch Pad Register (read/write) */ | |
| 143 | #define FFISR __REG(0x40100020) /* Infrared Selection Register (read/write) */ | |
| 144 | #define FFDLL __REG(0x40100000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ | |
| 145 | #define FFDLH __REG(0x40100004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ | |
| 146 | ||
| 147 | /* Bluetooth UART (BTUART) */ | |
| 148 | #define BTUART BTRBR | |
| 149 | #define BTRBR __REG(0x40200000) /* Receive Buffer Register (read only) */ | |
| 150 | #define BTTHR __REG(0x40200000) /* Transmit Holding Register (write only) */ | |
| 151 | #define BTIER __REG(0x40200004) /* Interrupt Enable Register (read/write) */ | |
| 152 | #define BTIIR __REG(0x40200008) /* Interrupt ID Register (read only) */ | |
| 153 | #define BTFCR __REG(0x40200008) /* FIFO Control Register (write only) */ | |
| 154 | #define BTLCR __REG(0x4020000C) /* Line Control Register (read/write) */ | |
| 155 | #define BTMCR __REG(0x40200010) /* Modem Control Register (read/write) */ | |
| 156 | #define BTLSR __REG(0x40200014) /* Line Status Register (read only) */ | |
| 157 | #define BTMSR __REG(0x40200018) /* Modem Status Register (read only) */ | |
| 158 | #define BTSPR __REG(0x4020001C) /* Scratch Pad Register (read/write) */ | |
| 159 | #define BTISR __REG(0x40200020) /* Infrared Selection Register (read/write) */ | |
| 160 | #define BTDLL __REG(0x40200000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ | |
| 161 | #define BTDLH __REG(0x40200004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ | |
| 162 | ||
| 163 | /* Standard UART (STUART) */ | |
| 164 | #define STUART STRBR | |
| 165 | #define STRBR __REG(0x40700000) /* Receive Buffer Register (read only) */ | |
| 166 | #define STTHR __REG(0x40700000) /* Transmit Holding Register (write only) */ | |
| 167 | #define STIER __REG(0x40700004) /* Interrupt Enable Register (read/write) */ | |
| 168 | #define STIIR __REG(0x40700008) /* Interrupt ID Register (read only) */ | |
| 169 | #define STFCR __REG(0x40700008) /* FIFO Control Register (write only) */ | |
| 170 | #define STLCR __REG(0x4070000C) /* Line Control Register (read/write) */ | |
| 171 | #define STMCR __REG(0x40700010) /* Modem Control Register (read/write) */ | |
| 172 | #define STLSR __REG(0x40700014) /* Line Status Register (read only) */ | |
| 173 | #define STMSR __REG(0x40700018) /* Reserved */ | |
| 174 | #define STSPR __REG(0x4070001C) /* Scratch Pad Register (read/write) */ | |
| 175 | #define STISR __REG(0x40700020) /* Infrared Selection Register (read/write) */ | |
| 176 | #define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ | |
| 177 | #define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ | |
| 178 | ||
| d9e29649 MR |
179 | /* Hardware UART (HWUART) */ |
| 180 | #define HWUART HWRBR | |
| 181 | #define HWRBR __REG(0x41600000) /* Receive Buffer Register (read only) */ | |
| 182 | #define HWTHR __REG(0x41600000) /* Transmit Holding Register (write only) */ | |
| 183 | #define HWIER __REG(0x41600004) /* Interrupt Enable Register (read/write) */ | |
| 184 | #define HWIIR __REG(0x41600008) /* Interrupt ID Register (read only) */ | |
| 185 | #define HWFCR __REG(0x41600008) /* FIFO Control Register (write only) */ | |
| 186 | #define HWLCR __REG(0x4160000C) /* Line Control Register (read/write) */ | |
| 187 | #define HWMCR __REG(0x41600010) /* Modem Control Register (read/write) */ | |
| 188 | #define HWLSR __REG(0x41600014) /* Line Status Register (read only) */ | |
| 189 | #define HWMSR __REG(0x41600018) /* Modem Status Register (read only) */ | |
| 190 | #define HWSPR __REG(0x4160001C) /* Scratch Pad Register (read/write) */ | |
| 191 | #define HWISR __REG(0x41600020) /* Infrared Selection Register (read/write) */ | |
| 192 | #define HWFOR __REG(0x41600024) /* Receive FIFO Occupancy Register (read only) */ | |
| 193 | #define HWABR __REG(0x41600028) /* Auto-Baud Control Register (read/write) */ | |
| 194 | #define HWACR __REG(0x4160002C) /* Auto-Baud Count Register (read only) */ | |
| 195 | #define HWDLL __REG(0x41600000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ | |
| 196 | #define HWDLH __REG(0x41600004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ | |
| 197 | ||
| 1da177e4 LT |
198 | #define IER_DMAE (1 << 7) /* DMA Requests Enable */ |
| 199 | #define IER_UUE (1 << 6) /* UART Unit Enable */ | |
| 200 | #define IER_NRZE (1 << 5) /* NRZ coding Enable */ | |
| 201 | #define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */ | |
| 202 | #define IER_MIE (1 << 3) /* Modem Interrupt Enable */ | |
| 203 | #define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */ | |
| 204 | #define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */ | |
| 205 | #define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */ | |
| 206 | ||
| 207 | #define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */ | |
| 208 | #define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */ | |
| 209 | #define IIR_TOD (1 << 3) /* Time Out Detected */ | |
| 210 | #define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */ | |
| 211 | #define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */ | |
| 212 | #define IIR_IP (1 << 0) /* Interrupt Pending (active low) */ | |
| 213 | ||
| 214 | #define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */ | |
| 215 | #define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */ | |
| 216 | #define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */ | |
| 217 | #define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */ | |
| 218 | #define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */ | |
| 219 | #define FCR_ITL_1 (0) | |
| 220 | #define FCR_ITL_8 (FCR_ITL1) | |
| 221 | #define FCR_ITL_16 (FCR_ITL2) | |
| 222 | #define FCR_ITL_32 (FCR_ITL2|FCR_ITL1) | |
| 223 | ||
| 224 | #define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */ | |
| 225 | #define LCR_SB (1 << 6) /* Set Break */ | |
| 226 | #define LCR_STKYP (1 << 5) /* Sticky Parity */ | |
| 227 | #define LCR_EPS (1 << 4) /* Even Parity Select */ | |
| 228 | #define LCR_PEN (1 << 3) /* Parity Enable */ | |
| 229 | #define LCR_STB (1 << 2) /* Stop Bit */ | |
| 230 | #define LCR_WLS1 (1 << 1) /* Word Length Select */ | |
| 231 | #define LCR_WLS0 (1 << 0) /* Word Length Select */ | |
| 232 | ||
| 233 | #define LSR_FIFOE (1 << 7) /* FIFO Error Status */ | |
| 234 | #define LSR_TEMT (1 << 6) /* Transmitter Empty */ | |
| 235 | #define LSR_TDRQ (1 << 5) /* Transmit Data Request */ | |
| 236 | #define LSR_BI (1 << 4) /* Break Interrupt */ | |
| 237 | #define LSR_FE (1 << 3) /* Framing Error */ | |
| 238 | #define LSR_PE (1 << 2) /* Parity Error */ | |
| 239 | #define LSR_OE (1 << 1) /* Overrun Error */ | |
| 240 | #define LSR_DR (1 << 0) /* Data Ready */ | |
| 241 | ||
| 242 | #define MCR_LOOP (1 << 4) | |
| 243 | #define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */ | |
| 244 | #define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */ | |
| 245 | #define MCR_RTS (1 << 1) /* Request to Send */ | |
| 246 | #define MCR_DTR (1 << 0) /* Data Terminal Ready */ | |
| 247 | ||
| 248 | #define MSR_DCD (1 << 7) /* Data Carrier Detect */ | |
| 249 | #define MSR_RI (1 << 6) /* Ring Indicator */ | |
| 250 | #define MSR_DSR (1 << 5) /* Data Set Ready */ | |
| 251 | #define MSR_CTS (1 << 4) /* Clear To Send */ | |
| 252 | #define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */ | |
| 253 | #define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */ | |
| 254 | #define MSR_DDSR (1 << 1) /* Delta Data Set Ready */ | |
| 255 | #define MSR_DCTS (1 << 0) /* Delta Clear To Send */ | |
| 256 | ||
| 257 | /* | |
| 258 | * IrSR (Infrared Selection Register) | |
| 259 | */ | |
| 260 | #define STISR_RXPL (1 << 4) /* Receive Data Polarity */ | |
| 261 | #define STISR_TXPL (1 << 3) /* Transmit Data Polarity */ | |
| 262 | #define STISR_XMODE (1 << 2) /* Transmit Pulse Width Select */ | |
| 263 | #define STISR_RCVEIR (1 << 1) /* Receiver SIR Enable */ | |
| 264 | #define STISR_XMITIR (1 << 0) /* Transmitter SIR Enable */ | |
| 265 | ||
| 266 | ||
| 267 | /* | |
| 283afa06 | 268 | * I2C registers - moved into drivers/i2c/busses/i2c-pxa.c |
| 1da177e4 LT |
269 | */ |
| 270 | ||
| 1da177e4 | 271 | /* |
| 52358ba3 | 272 | * Serial Audio Controller - moved into sound/soc/pxa/pxa2xx-i2s.c |
| 1da177e4 LT |
273 | */ |
| 274 | ||
| 1da177e4 LT |
275 | /* |
| 276 | * AC97 Controller registers | |
| 277 | */ | |
| 278 | ||
| 279 | #define POCR __REG(0x40500000) /* PCM Out Control Register */ | |
| 280 | #define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ | |
| 281 | #define POCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ | |
| 282 | ||
| 283 | #define PICR __REG(0x40500004) /* PCM In Control Register */ | |
| 284 | #define PICR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ | |
| 285 | #define PICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ | |
| 286 | ||
| 287 | #define MCCR __REG(0x40500008) /* Mic In Control Register */ | |
| 288 | #define MCCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ | |
| 289 | #define MCCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ | |
| 290 | ||
| 291 | #define GCR __REG(0x4050000C) /* Global Control Register */ | |
| d862ccc5 MB |
292 | #ifdef CONFIG_PXA3xx |
| 293 | #define GCR_CLKBPB (1 << 31) /* Internal clock enable */ | |
| 294 | #endif | |
| 1da177e4 LT |
295 | #define GCR_nDMAEN (1 << 24) /* non DMA Enable */ |
| 296 | #define GCR_CDONE_IE (1 << 19) /* Command Done Interrupt Enable */ | |
| 297 | #define GCR_SDONE_IE (1 << 18) /* Status Done Interrupt Enable */ | |
| 298 | #define GCR_SECRDY_IEN (1 << 9) /* Secondary Ready Interrupt Enable */ | |
| 299 | #define GCR_PRIRDY_IEN (1 << 8) /* Primary Ready Interrupt Enable */ | |
| 300 | #define GCR_SECRES_IEN (1 << 5) /* Secondary Resume Interrupt Enable */ | |
| 301 | #define GCR_PRIRES_IEN (1 << 4) /* Primary Resume Interrupt Enable */ | |
| 302 | #define GCR_ACLINK_OFF (1 << 3) /* AC-link Shut Off */ | |
| 303 | #define GCR_WARM_RST (1 << 2) /* AC97 Warm Reset */ | |
| 304 | #define GCR_COLD_RST (1 << 1) /* AC'97 Cold Reset (0 = active) */ | |
| 305 | #define GCR_GIE (1 << 0) /* Codec GPI Interrupt Enable */ | |
| 306 | ||
| 307 | #define POSR __REG(0x40500010) /* PCM Out Status Register */ | |
| 308 | #define POSR_FIFOE (1 << 4) /* FIFO error */ | |
| 309 | #define POSR_FSR (1 << 2) /* FIFO Service Request */ | |
| 310 | ||
| 311 | #define PISR __REG(0x40500014) /* PCM In Status Register */ | |
| 312 | #define PISR_FIFOE (1 << 4) /* FIFO error */ | |
| 313 | #define PISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */ | |
| 314 | #define PISR_FSR (1 << 2) /* FIFO Service Request */ | |
| 315 | ||
| 316 | #define MCSR __REG(0x40500018) /* Mic In Status Register */ | |
| 317 | #define MCSR_FIFOE (1 << 4) /* FIFO error */ | |
| 318 | #define MCSR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */ | |
| 319 | #define MCSR_FSR (1 << 2) /* FIFO Service Request */ | |
| 320 | ||
| 321 | #define GSR __REG(0x4050001C) /* Global Status Register */ | |
| 322 | #define GSR_CDONE (1 << 19) /* Command Done */ | |
| 323 | #define GSR_SDONE (1 << 18) /* Status Done */ | |
| 324 | #define GSR_RDCS (1 << 15) /* Read Completion Status */ | |
| 325 | #define GSR_BIT3SLT12 (1 << 14) /* Bit 3 of slot 12 */ | |
| 326 | #define GSR_BIT2SLT12 (1 << 13) /* Bit 2 of slot 12 */ | |
| 327 | #define GSR_BIT1SLT12 (1 << 12) /* Bit 1 of slot 12 */ | |
| 328 | #define GSR_SECRES (1 << 11) /* Secondary Resume Interrupt */ | |
| 329 | #define GSR_PRIRES (1 << 10) /* Primary Resume Interrupt */ | |
| 330 | #define GSR_SCR (1 << 9) /* Secondary Codec Ready */ | |
| 331 | #define GSR_PCR (1 << 8) /* Primary Codec Ready */ | |
| 332 | #define GSR_MCINT (1 << 7) /* Mic In Interrupt */ | |
| 333 | #define GSR_POINT (1 << 6) /* PCM Out Interrupt */ | |
| 334 | #define GSR_PIINT (1 << 5) /* PCM In Interrupt */ | |
| 335 | #define GSR_ACOFFD (1 << 3) /* AC-link Shut Off Done */ | |
| 336 | #define GSR_MOINT (1 << 2) /* Modem Out Interrupt */ | |
| 337 | #define GSR_MIINT (1 << 1) /* Modem In Interrupt */ | |
| 338 | #define GSR_GSCI (1 << 0) /* Codec GPI Status Change Interrupt */ | |
| 339 | ||
| 340 | #define CAR __REG(0x40500020) /* CODEC Access Register */ | |
| 341 | #define CAR_CAIP (1 << 0) /* Codec Access In Progress */ | |
| 342 | ||
| 343 | #define PCDR __REG(0x40500040) /* PCM FIFO Data Register */ | |
| 344 | #define MCDR __REG(0x40500060) /* Mic-in FIFO Data Register */ | |
| 345 | ||
| 346 | #define MOCR __REG(0x40500100) /* Modem Out Control Register */ | |
| 347 | #define MOCR_FEIE (1 << 3) /* FIFO Error */ | |
| 348 | #define MOCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ | |
| 349 | ||
| 350 | #define MICR __REG(0x40500108) /* Modem In Control Register */ | |
| 351 | #define MICR_FEIE (1 << 3) /* FIFO Error */ | |
| 352 | #define MICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ | |
| 353 | ||
| 354 | #define MOSR __REG(0x40500110) /* Modem Out Status Register */ | |
| 355 | #define MOSR_FIFOE (1 << 4) /* FIFO error */ | |
| 356 | #define MOSR_FSR (1 << 2) /* FIFO Service Request */ | |
| 357 | ||
| 358 | #define MISR __REG(0x40500118) /* Modem In Status Register */ | |
| 359 | #define MISR_FIFOE (1 << 4) /* FIFO error */ | |
| 360 | #define MISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */ | |
| 361 | #define MISR_FSR (1 << 2) /* FIFO Service Request */ | |
| 362 | ||
| 363 | #define MODR __REG(0x40500140) /* Modem FIFO Data Register */ | |
| 364 | ||
| 365 | #define PAC_REG_BASE __REG(0x40500200) /* Primary Audio Codec */ | |
| 366 | #define SAC_REG_BASE __REG(0x40500300) /* Secondary Audio Codec */ | |
| 367 | #define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */ | |
| 368 | #define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */ | |
| 369 | ||
| 370 | ||
| 1da177e4 LT |
371 | /* |
| 372 | * Fast Infrared Communication Port | |
| 373 | */ | |
| 374 | ||
| 375 | #define FICP __REG(0x40800000) /* Start of FICP area */ | |
| 376 | #define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */ | |
| 377 | #define ICCR1 __REG(0x40800004) /* ICP Control Register 1 */ | |
| 378 | #define ICCR2 __REG(0x40800008) /* ICP Control Register 2 */ | |
| 379 | #define ICDR __REG(0x4080000c) /* ICP Data Register */ | |
| 380 | #define ICSR0 __REG(0x40800014) /* ICP Status Register 0 */ | |
| 381 | #define ICSR1 __REG(0x40800018) /* ICP Status Register 1 */ | |
| 382 | ||
| 84c07923 | 383 | #define ICCR0_AME (1 << 7) /* Address match enable */ |
| 1da177e4 LT |
384 | #define ICCR0_TIE (1 << 6) /* Transmit FIFO interrupt enable */ |
| 385 | #define ICCR0_RIE (1 << 5) /* Recieve FIFO interrupt enable */ | |
| 386 | #define ICCR0_RXE (1 << 4) /* Receive enable */ | |
| 387 | #define ICCR0_TXE (1 << 3) /* Transmit enable */ | |
| 388 | #define ICCR0_TUS (1 << 2) /* Transmit FIFO underrun select */ | |
| 389 | #define ICCR0_LBM (1 << 1) /* Loopback mode */ | |
| 390 | #define ICCR0_ITR (1 << 0) /* IrDA transmission */ | |
| 391 | ||
| 1da177e4 LT |
392 | #define ICCR2_RXP (1 << 3) /* Receive Pin Polarity select */ |
| 393 | #define ICCR2_TXP (1 << 2) /* Transmit Pin Polarity select */ | |
| 394 | #define ICCR2_TRIG (3 << 0) /* Receive FIFO Trigger threshold */ | |
| 395 | #define ICCR2_TRIG_8 (0 << 0) /* >= 8 bytes */ | |
| 396 | #define ICCR2_TRIG_16 (1 << 0) /* >= 16 bytes */ | |
| 397 | #define ICCR2_TRIG_32 (2 << 0) /* >= 32 bytes */ | |
| 1da177e4 LT |
398 | |
| 399 | #ifdef CONFIG_PXA27x | |
| 400 | #define ICSR0_EOC (1 << 6) /* DMA End of Descriptor Chain */ | |
| 401 | #endif | |
| 402 | #define ICSR0_FRE (1 << 5) /* Framing error */ | |
| 403 | #define ICSR0_RFS (1 << 4) /* Receive FIFO service request */ | |
| 404 | #define ICSR0_TFS (1 << 3) /* Transnit FIFO service request */ | |
| 405 | #define ICSR0_RAB (1 << 2) /* Receiver abort */ | |
| 406 | #define ICSR0_TUR (1 << 1) /* Trunsmit FIFO underun */ | |
| 407 | #define ICSR0_EIF (1 << 0) /* End/Error in FIFO */ | |
| 408 | ||
| 409 | #define ICSR1_ROR (1 << 6) /* Receiver FIFO underrun */ | |
| 410 | #define ICSR1_CRE (1 << 5) /* CRC error */ | |
| 411 | #define ICSR1_EOF (1 << 4) /* End of frame */ | |
| 412 | #define ICSR1_TNF (1 << 3) /* Transmit FIFO not full */ | |
| 413 | #define ICSR1_RNE (1 << 2) /* Receive FIFO not empty */ | |
| 414 | #define ICSR1_TBY (1 << 1) /* Tramsmiter busy flag */ | |
| 415 | #define ICSR1_RSY (1 << 0) /* Recevier synchronized flag */ | |
| 416 | ||
| 417 | ||
| 418 | /* | |
| 419 | * Real Time Clock | |
| 420 | */ | |
| 421 | ||
| 422 | #define RCNR __REG(0x40900000) /* RTC Count Register */ | |
| 423 | #define RTAR __REG(0x40900004) /* RTC Alarm Register */ | |
| 424 | #define RTSR __REG(0x40900008) /* RTC Status Register */ | |
| 425 | #define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */ | |
| 426 | #define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */ | |
| 427 | ||
| 428 | #define RTSR_PICE (1 << 15) /* Periodic interrupt count enable */ | |
| 429 | #define RTSR_PIALE (1 << 14) /* Periodic interrupt Alarm enable */ | |
| 430 | #define RTSR_HZE (1 << 3) /* HZ interrupt enable */ | |
| 431 | #define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */ | |
| 432 | #define RTSR_HZ (1 << 1) /* HZ rising-edge detected */ | |
| 433 | #define RTSR_AL (1 << 0) /* RTC alarm detected */ | |
| 434 | ||
| 435 | ||
| 436 | /* | |
| 437 | * OS Timer & Match Registers | |
| 438 | */ | |
| 439 | ||
| 440 | #define OSMR0 __REG(0x40A00000) /* */ | |
| 441 | #define OSMR1 __REG(0x40A00004) /* */ | |
| 442 | #define OSMR2 __REG(0x40A00008) /* */ | |
| 443 | #define OSMR3 __REG(0x40A0000C) /* */ | |
| 444 | #define OSMR4 __REG(0x40A00080) /* */ | |
| 445 | #define OSCR __REG(0x40A00010) /* OS Timer Counter Register */ | |
| 446 | #define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */ | |
| 447 | #define OMCR4 __REG(0x40A000C0) /* */ | |
| 448 | #define OSSR __REG(0x40A00014) /* OS Timer Status Register */ | |
| 449 | #define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */ | |
| 450 | #define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */ | |
| 451 | ||
| 452 | #define OSSR_M3 (1 << 3) /* Match status channel 3 */ | |
| 453 | #define OSSR_M2 (1 << 2) /* Match status channel 2 */ | |
| 454 | #define OSSR_M1 (1 << 1) /* Match status channel 1 */ | |
| 455 | #define OSSR_M0 (1 << 0) /* Match status channel 0 */ | |
| 456 | ||
| 457 | #define OWER_WME (1 << 0) /* Watchdog Match Enable */ | |
| 458 | ||
| 459 | #define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */ | |
| 460 | #define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */ | |
| 461 | #define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */ | |
| 462 | #define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */ | |
| 463 | ||
| 464 | ||
| 465 | /* | |
| 466 | * Pulse Width Modulator | |
| 467 | */ | |
| 468 | ||
| 469 | #define PWM_CTRL0 __REG(0x40B00000) /* PWM 0 Control Register */ | |
| 470 | #define PWM_PWDUTY0 __REG(0x40B00004) /* PWM 0 Duty Cycle Register */ | |
| 471 | #define PWM_PERVAL0 __REG(0x40B00008) /* PWM 0 Period Control Register */ | |
| 472 | ||
| 473 | #define PWM_CTRL1 __REG(0x40C00000) /* PWM 1Control Register */ | |
| 474 | #define PWM_PWDUTY1 __REG(0x40C00004) /* PWM 1 Duty Cycle Register */ | |
| 475 | #define PWM_PERVAL1 __REG(0x40C00008) /* PWM 1 Period Control Register */ | |
| 476 | ||
| 477 | ||
| 478 | /* | |
| 479 | * Interrupt Controller | |
| 480 | */ | |
| 481 | ||
| 482 | #define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */ | |
| 483 | #define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */ | |
| 484 | #define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */ | |
| 485 | #define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */ | |
| 486 | #define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */ | |
| 487 | #define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */ | |
| 488 | ||
| f6fb7af4 | 489 | #define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ |
| 490 | #define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ | |
| 491 | #define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ | |
| 492 | #define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ | |
| 493 | #define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ | |
| 1da177e4 LT |
494 | |
| 495 | /* | |
| 496 | * General Purpose I/O | |
| 497 | */ | |
| 498 | ||
| 1c44f5f1 PZ |
499 | #define GPIO0_BASE ((void __iomem *)io_p2v(0x40E00000)) |
| 500 | #define GPIO1_BASE ((void __iomem *)io_p2v(0x40E00004)) | |
| 501 | #define GPIO2_BASE ((void __iomem *)io_p2v(0x40E00008)) | |
| 502 | #define GPIO3_BASE ((void __iomem *)io_p2v(0x40E00100)) | |
| 503 | ||
| 504 | #define GPLR_OFFSET 0x00 | |
| 505 | #define GPDR_OFFSET 0x0C | |
| 506 | #define GPSR_OFFSET 0x18 | |
| 507 | #define GPCR_OFFSET 0x24 | |
| 508 | #define GRER_OFFSET 0x30 | |
| 509 | #define GFER_OFFSET 0x3C | |
| 510 | #define GEDR_OFFSET 0x48 | |
| 511 | ||
| 1da177e4 LT |
512 | #define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */ |
| 513 | #define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */ | |
| 514 | #define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */ | |
| 515 | ||
| 516 | #define GPDR0 __REG(0x40E0000C) /* GPIO Pin Direction Register GPIO<31:0> */ | |
| 517 | #define GPDR1 __REG(0x40E00010) /* GPIO Pin Direction Register GPIO<63:32> */ | |
| 518 | #define GPDR2 __REG(0x40E00014) /* GPIO Pin Direction Register GPIO<80:64> */ | |
| 519 | ||
| 520 | #define GPSR0 __REG(0x40E00018) /* GPIO Pin Output Set Register GPIO<31:0> */ | |
| 521 | #define GPSR1 __REG(0x40E0001C) /* GPIO Pin Output Set Register GPIO<63:32> */ | |
| 522 | #define GPSR2 __REG(0x40E00020) /* GPIO Pin Output Set Register GPIO<80:64> */ | |
| 523 | ||
| 524 | #define GPCR0 __REG(0x40E00024) /* GPIO Pin Output Clear Register GPIO<31:0> */ | |
| 525 | #define GPCR1 __REG(0x40E00028) /* GPIO Pin Output Clear Register GPIO <63:32> */ | |
| 526 | #define GPCR2 __REG(0x40E0002C) /* GPIO Pin Output Clear Register GPIO <80:64> */ | |
| 527 | ||
| 528 | #define GRER0 __REG(0x40E00030) /* GPIO Rising-Edge Detect Register GPIO<31:0> */ | |
| 529 | #define GRER1 __REG(0x40E00034) /* GPIO Rising-Edge Detect Register GPIO<63:32> */ | |
| 530 | #define GRER2 __REG(0x40E00038) /* GPIO Rising-Edge Detect Register GPIO<80:64> */ | |
| 531 | ||
| 532 | #define GFER0 __REG(0x40E0003C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */ | |
| 533 | #define GFER1 __REG(0x40E00040) /* GPIO Falling-Edge Detect Register GPIO<63:32> */ | |
| 534 | #define GFER2 __REG(0x40E00044) /* GPIO Falling-Edge Detect Register GPIO<80:64> */ | |
| 535 | ||
| 536 | #define GEDR0 __REG(0x40E00048) /* GPIO Edge Detect Status Register GPIO<31:0> */ | |
| 537 | #define GEDR1 __REG(0x40E0004C) /* GPIO Edge Detect Status Register GPIO<63:32> */ | |
| 538 | #define GEDR2 __REG(0x40E00050) /* GPIO Edge Detect Status Register GPIO<80:64> */ | |
| 539 | ||
| 540 | #define GAFR0_L __REG(0x40E00054) /* GPIO Alternate Function Select Register GPIO<15:0> */ | |
| 541 | #define GAFR0_U __REG(0x40E00058) /* GPIO Alternate Function Select Register GPIO<31:16> */ | |
| 542 | #define GAFR1_L __REG(0x40E0005C) /* GPIO Alternate Function Select Register GPIO<47:32> */ | |
| 543 | #define GAFR1_U __REG(0x40E00060) /* GPIO Alternate Function Select Register GPIO<63:48> */ | |
| 544 | #define GAFR2_L __REG(0x40E00064) /* GPIO Alternate Function Select Register GPIO<79:64> */ | |
| 545 | #define GAFR2_U __REG(0x40E00068) /* GPIO Alternate Function Select Register GPIO<95-80> */ | |
| 546 | #define GAFR3_L __REG(0x40E0006C) /* GPIO Alternate Function Select Register GPIO<111:96> */ | |
| 547 | #define GAFR3_U __REG(0x40E00070) /* GPIO Alternate Function Select Register GPIO<127:112> */ | |
| 548 | ||
| 549 | #define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */ | |
| 550 | #define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */ | |
| 551 | #define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */ | |
| 552 | #define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO<127:96> */ | |
| 553 | #define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */ | |
| 554 | #define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<127:96> */ | |
| 555 | #define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */ | |
| 556 | ||
| 557 | /* More handy macros. The argument is a literal GPIO number. */ | |
| 558 | ||
| 559 | #define GPIO_bit(x) (1 << ((x) & 0x1f)) | |
| 560 | ||
| 2c8086a5 | 561 | #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) |
| 1da177e4 LT |
562 | |
| 563 | /* Interrupt Controller */ | |
| 564 | ||
| 1da177e4 LT |
565 | #define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) |
| 566 | #define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) | |
| 567 | #define _GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3) | |
| 568 | #define _GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3) | |
| 569 | #define _GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3) | |
| 570 | #define _GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3) | |
| 571 | #define _GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) | |
| 572 | #define _GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) | |
| 573 | ||
| 574 | #define GPLR(x) (*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3)) | |
| 575 | #define GPDR(x) (*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3)) | |
| 576 | #define GPSR(x) (*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3)) | |
| 577 | #define GPCR(x) (*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3)) | |
| 578 | #define GRER(x) (*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3)) | |
| 579 | #define GFER(x) (*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3)) | |
| 580 | #define GEDR(x) (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3)) | |
| 581 | #define GAFR(x) (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \ | |
| 582 | ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U))) | |
| 583 | #else | |
| 584 | ||
| 585 | #define GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) | |
| 586 | #define GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) | |
| 587 | #define GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3) | |
| 588 | #define GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3) | |
| 589 | #define GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3) | |
| 590 | #define GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3) | |
| 591 | #define GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) | |
| 592 | #define GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) | |
| 593 | ||
| 594 | #endif | |
| 595 | ||
| 1da177e4 | 596 | /* |
| 0b0a9df6 | 597 | * Power Manager - see pxa2xx-regs.h |
| 1da177e4 LT |
598 | */ |
| 599 | ||
| 1da177e4 | 600 | /* |
| a09e64fb | 601 | * SSP Serial Port Registers - see arch/arm/mach-pxa/include/mach/regs-ssp.h |
| 1da177e4 LT |
602 | */ |
| 603 | ||
| 1da177e4 | 604 | /* |
| 7a2b94bc | 605 | * MultiMediaCard (MMC) controller - see drivers/mmc/host/pxamci.h |
| 1da177e4 LT |
606 | */ |
| 607 | ||
| 1da177e4 | 608 | /* |
| a09e64fb | 609 | * Core Clock - see arch/arm/mach-pxa/include/mach/pxa2xx-regs.h |
| 1da177e4 LT |
610 | */ |
| 611 | ||
| 1da177e4 LT |
612 | #ifdef CONFIG_PXA27x |
| 613 | ||
| 1da177e4 LT |
614 | /* Camera Interface */ |
| 615 | #define CICR0 __REG(0x50000000) | |
| 616 | #define CICR1 __REG(0x50000004) | |
| 617 | #define CICR2 __REG(0x50000008) | |
| 618 | #define CICR3 __REG(0x5000000C) | |
| 619 | #define CICR4 __REG(0x50000010) | |
| 620 | #define CISR __REG(0x50000014) | |
| 621 | #define CIFR __REG(0x50000018) | |
| 622 | #define CITOR __REG(0x5000001C) | |
| 623 | #define CIBR0 __REG(0x50000028) | |
| 624 | #define CIBR1 __REG(0x50000030) | |
| 625 | #define CIBR2 __REG(0x50000038) | |
| 626 | ||
| 627 | #define CICR0_DMAEN (1 << 31) /* DMA request enable */ | |
| 628 | #define CICR0_PAR_EN (1 << 30) /* Parity enable */ | |
| 629 | #define CICR0_SL_CAP_EN (1 << 29) /* Capture enable for slave mode */ | |
| 630 | #define CICR0_ENB (1 << 28) /* Camera interface enable */ | |
| 631 | #define CICR0_DIS (1 << 27) /* Camera interface disable */ | |
| 632 | #define CICR0_SIM (0x7 << 24) /* Sensor interface mode mask */ | |
| 633 | #define CICR0_TOM (1 << 9) /* Time-out mask */ | |
| 634 | #define CICR0_RDAVM (1 << 8) /* Receive-data-available mask */ | |
| 635 | #define CICR0_FEM (1 << 7) /* FIFO-empty mask */ | |
| 636 | #define CICR0_EOLM (1 << 6) /* End-of-line mask */ | |
| 637 | #define CICR0_PERRM (1 << 5) /* Parity-error mask */ | |
| 638 | #define CICR0_QDM (1 << 4) /* Quick-disable mask */ | |
| 639 | #define CICR0_CDM (1 << 3) /* Disable-done mask */ | |
| 640 | #define CICR0_SOFM (1 << 2) /* Start-of-frame mask */ | |
| 641 | #define CICR0_EOFM (1 << 1) /* End-of-frame mask */ | |
| 642 | #define CICR0_FOM (1 << 0) /* FIFO-overrun mask */ | |
| 643 | ||
| 644 | #define CICR1_TBIT (1 << 31) /* Transparency bit */ | |
| 64c1dd3b | 645 | #define CICR1_RGBT_CONV (0x3 << 29) /* RGBT conversion mask */ |
| 1f4a3931 | 646 | #define CICR1_PPL (0x7ff << 15) /* Pixels per line mask */ |
| 1da177e4 LT |
647 | #define CICR1_RGB_CONV (0x7 << 12) /* RGB conversion mask */ |
| 648 | #define CICR1_RGB_F (1 << 11) /* RGB format */ | |
| 649 | #define CICR1_YCBCR_F (1 << 10) /* YCbCr format */ | |
| 650 | #define CICR1_RGB_BPP (0x7 << 7) /* RGB bis per pixel mask */ | |
| 651 | #define CICR1_RAW_BPP (0x3 << 5) /* Raw bis per pixel mask */ | |
| 652 | #define CICR1_COLOR_SP (0x3 << 3) /* Color space mask */ | |
| 653 | #define CICR1_DW (0x7 << 0) /* Data width mask */ | |
| 654 | ||
| 655 | #define CICR2_BLW (0xff << 24) /* Beginning-of-line pixel clock | |
| 656 | wait count mask */ | |
| 657 | #define CICR2_ELW (0xff << 16) /* End-of-line pixel clock | |
| 658 | wait count mask */ | |
| 659 | #define CICR2_HSW (0x3f << 10) /* Horizontal sync pulse width mask */ | |
| 660 | #define CICR2_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock | |
| 661 | wait count mask */ | |
| 662 | #define CICR2_FSW (0x7 << 0) /* Frame stabilization | |
| 663 | wait count mask */ | |
| 664 | ||
| 665 | #define CICR3_BFW (0xff << 24) /* Beginning-of-frame line clock | |
| 666 | wait count mask */ | |
| 667 | #define CICR3_EFW (0xff << 16) /* End-of-frame line clock | |
| 668 | wait count mask */ | |
| 669 | #define CICR3_VSW (0x3f << 10) /* Vertical sync pulse width mask */ | |
| 670 | #define CICR3_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock | |
| 671 | wait count mask */ | |
| 1f4a3931 | 672 | #define CICR3_LPF (0x7ff << 0) /* Lines per frame mask */ |
| 1da177e4 LT |
673 | |
| 674 | #define CICR4_MCLK_DLY (0x3 << 24) /* MCLK Data Capture Delay mask */ | |
| 675 | #define CICR4_PCLK_EN (1 << 23) /* Pixel clock enable */ | |
| 676 | #define CICR4_PCP (1 << 22) /* Pixel clock polarity */ | |
| 677 | #define CICR4_HSP (1 << 21) /* Horizontal sync polarity */ | |
| 678 | #define CICR4_VSP (1 << 20) /* Vertical sync polarity */ | |
| 679 | #define CICR4_MCLK_EN (1 << 19) /* MCLK enable */ | |
| 680 | #define CICR4_FR_RATE (0x7 << 8) /* Frame rate mask */ | |
| 681 | #define CICR4_DIV (0xff << 0) /* Clock divisor mask */ | |
| 682 | ||
| 683 | #define CISR_FTO (1 << 15) /* FIFO time-out */ | |
| 684 | #define CISR_RDAV_2 (1 << 14) /* Channel 2 receive data available */ | |
| 685 | #define CISR_RDAV_1 (1 << 13) /* Channel 1 receive data available */ | |
| 686 | #define CISR_RDAV_0 (1 << 12) /* Channel 0 receive data available */ | |
| 687 | #define CISR_FEMPTY_2 (1 << 11) /* Channel 2 FIFO empty */ | |
| 688 | #define CISR_FEMPTY_1 (1 << 10) /* Channel 1 FIFO empty */ | |
| 689 | #define CISR_FEMPTY_0 (1 << 9) /* Channel 0 FIFO empty */ | |
| 690 | #define CISR_EOL (1 << 8) /* End of line */ | |
| 691 | #define CISR_PAR_ERR (1 << 7) /* Parity error */ | |
| 692 | #define CISR_CQD (1 << 6) /* Camera interface quick disable */ | |
| 1f4a3931 ES |
693 | #define CISR_CDD (1 << 5) /* Camera interface disable done */ |
| 694 | #define CISR_SOF (1 << 4) /* Start of frame */ | |
| 1da177e4 LT |
695 | #define CISR_EOF (1 << 3) /* End of frame */ |
| 696 | #define CISR_IFO_2 (1 << 2) /* FIFO overrun for Channel 2 */ | |
| 697 | #define CISR_IFO_1 (1 << 1) /* FIFO overrun for Channel 1 */ | |
| 698 | #define CISR_IFO_0 (1 << 0) /* FIFO overrun for Channel 0 */ | |
| 699 | ||
| 700 | #define CIFR_FLVL2 (0x7f << 23) /* FIFO 2 level mask */ | |
| 701 | #define CIFR_FLVL1 (0x7f << 16) /* FIFO 1 level mask */ | |
| 702 | #define CIFR_FLVL0 (0xff << 8) /* FIFO 0 level mask */ | |
| 703 | #define CIFR_THL_0 (0x3 << 4) /* Threshold Level for Channel 0 FIFO */ | |
| 704 | #define CIFR_RESET_F (1 << 3) /* Reset input FIFOs */ | |
| 705 | #define CIFR_FEN2 (1 << 2) /* FIFO enable for channel 2 */ | |
| 706 | #define CIFR_FEN1 (1 << 1) /* FIFO enable for channel 1 */ | |
| 707 | #define CIFR_FEN0 (1 << 0) /* FIFO enable for channel 0 */ | |
| 708 | ||
| 709 | #define SRAM_SIZE 0x40000 /* 4x64K */ | |
| 710 | ||
| 711 | #define SRAM_MEM_PHYS 0x5C000000 | |
| 712 | ||
| 713 | #define IMPMCR __REG(0x58000000) /* IM Power Management Control Reg */ | |
| 714 | #define IMPMSR __REG(0x58000008) /* IM Power Management Status Reg */ | |
| 715 | ||
| 716 | #define IMPMCR_PC3 (0x3 << 22) /* Bank 3 Power Control */ | |
| 717 | #define IMPMCR_PC3_RUN_MODE (0x0 << 22) /* Run mode */ | |
| 718 | #define IMPMCR_PC3_STANDBY_MODE (0x1 << 22) /* Standby mode */ | |
| 719 | #define IMPMCR_PC3_AUTO_MODE (0x3 << 22) /* Automatically controlled */ | |
| 720 | ||
| 721 | #define IMPMCR_PC2 (0x3 << 20) /* Bank 2 Power Control */ | |
| 722 | #define IMPMCR_PC2_RUN_MODE (0x0 << 20) /* Run mode */ | |
| 723 | #define IMPMCR_PC2_STANDBY_MODE (0x1 << 20) /* Standby mode */ | |
| 724 | #define IMPMCR_PC2_AUTO_MODE (0x3 << 20) /* Automatically controlled */ | |
| 725 | ||
| 726 | #define IMPMCR_PC1 (0x3 << 18) /* Bank 1 Power Control */ | |
| 727 | #define IMPMCR_PC1_RUN_MODE (0x0 << 18) /* Run mode */ | |
| 728 | #define IMPMCR_PC1_STANDBY_MODE (0x1 << 18) /* Standby mode */ | |
| 729 | #define IMPMCR_PC1_AUTO_MODE (0x3 << 18) /* Automatically controlled */ | |
| 730 | ||
| 731 | #define IMPMCR_PC0 (0x3 << 16) /* Bank 0 Power Control */ | |
| 732 | #define IMPMCR_PC0_RUN_MODE (0x0 << 16) /* Run mode */ | |
| 733 | #define IMPMCR_PC0_STANDBY_MODE (0x1 << 16) /* Standby mode */ | |
| 734 | #define IMPMCR_PC0_AUTO_MODE (0x3 << 16) /* Automatically controlled */ | |
| 735 | ||
| 736 | #define IMPMCR_AW3 (1 << 11) /* Bank 3 Automatic Wake-up enable */ | |
| 737 | #define IMPMCR_AW2 (1 << 10) /* Bank 2 Automatic Wake-up enable */ | |
| 738 | #define IMPMCR_AW1 (1 << 9) /* Bank 1 Automatic Wake-up enable */ | |
| 739 | #define IMPMCR_AW0 (1 << 8) /* Bank 0 Automatic Wake-up enable */ | |
| 740 | ||
| 741 | #define IMPMCR_DST (0xFF << 0) /* Delay Standby Time, ms */ | |
| 742 | ||
| 743 | #define IMPMSR_PS3 (0x3 << 6) /* Bank 3 Power Status: */ | |
| 744 | #define IMPMSR_PS3_RUN_MODE (0x0 << 6) /* Run mode */ | |
| 745 | #define IMPMSR_PS3_STANDBY_MODE (0x1 << 6) /* Standby mode */ | |
| 746 | ||
| 747 | #define IMPMSR_PS2 (0x3 << 4) /* Bank 2 Power Status: */ | |
| 748 | #define IMPMSR_PS2_RUN_MODE (0x0 << 4) /* Run mode */ | |
| 749 | #define IMPMSR_PS2_STANDBY_MODE (0x1 << 4) /* Standby mode */ | |
| 750 | ||
| 751 | #define IMPMSR_PS1 (0x3 << 2) /* Bank 1 Power Status: */ | |
| 752 | #define IMPMSR_PS1_RUN_MODE (0x0 << 2) /* Run mode */ | |
| 753 | #define IMPMSR_PS1_STANDBY_MODE (0x1 << 2) /* Standby mode */ | |
| 754 | ||
| 755 | #define IMPMSR_PS0 (0x3 << 0) /* Bank 0 Power Status: */ | |
| 756 | #define IMPMSR_PS0_RUN_MODE (0x0 << 0) /* Run mode */ | |
| 757 | #define IMPMSR_PS0_STANDBY_MODE (0x1 << 0) /* Standby mode */ | |
| 758 | ||
| 759 | #endif | |
| 760 | ||
| 80a18573 TP |
761 | /* PWRMODE register M field values */ |
| 762 | ||
| 763 | #define PWRMODE_IDLE 0x1 | |
| 764 | #define PWRMODE_STANDBY 0x2 | |
| 765 | #define PWRMODE_SLEEP 0x3 | |
| 766 | #define PWRMODE_DEEPSLEEP 0x7 | |
| 767 | ||
| 1da177e4 | 768 | #endif |