[linux-2.6-block.git] / arch / arm / mach-pxa / include / mach / h5000.h

/*
 * Hardware definitions for HP iPAQ h5xxx Handheld Computers
 *
 * Copyright(20)02 Hewlett-Packard Company.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
 * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
 * FITNESS FOR ANY PARTICULAR PURPOSE.
 *
 * Author: Jamey Hicks
 */

#ifndef __ASM_ARCH_H5000_H
#define __ASM_ARCH_H5000_H

#include <mach/mfp-pxa25x.h>

/*
 * CPU GPIOs
 */

#define H5000_GPIO_POWER_BUTTON   (0)
#define H5000_GPIO_RESET_BUTTON_N (1)
#define H5000_GPIO_OPT_INT        (2)
#define H5000_GPIO_BACKUP_POWER   (3)
#define H5000_GPIO_ACTION_BUTTON  (4)
#define H5000_GPIO_COM_DCD_SOMETHING  (5) /* what is this really ? */
/* 6 not connected */
#define H5000_GPIO_RESET_BUTTON_AGAIN_N (7) /* connected to gpio 1 as well */
/* 8 not connected */
#define H5000_GPIO_RSO_N          (9)       /* reset output from max1702 which regulates 3.3 and 2.5 */
#define H5000_GPIO_ASIC_INT_N   (10)       /* from companion asic */
#define H5000_GPIO_BT_ENV_0     (11)       /* to LMX9814, set to 1 according to regdump */
/*(12) not connected */
#define H5000_GPIO_BT_ENV_1     (13)       /* to LMX9814, set to 1 according to regdump */
#define H5000_GPIO_BT_WU        (14)       /* from LMX9814, Defined as HOST_WAKEUP in the LMX9820 data sheet */
/*(15) is CS1# */
/*(16) not connected */
/*(17) not connected */
/*(18) is pcmcia ready */
/*(19) is dreq1 */
/*(20) is dreq0 */
#define H5000_GPIO_OE_RD_NWR	(21)       /* output enable on rd/nwr signal to companion asic */
/*(22) is not connected */
#define H5000_GPIO_OPT_SPI_CLK  (23)       /* to extension pack */
#define H5000_GPIO_OPT_SPI_CS_N (24)       /* to extension pack */
#define H5000_GPIO_OPT_SPI_DOUT (25)       /* to extension pack */
#define H5000_GPIO_OPT_SPI_DIN  (26)       /* to extension pack */
/*(27) not connected */
#define H5000_GPIO_I2S_BITCLK   (28)       /* connected to AC97 codec */
#define H5000_GPIO_I2S_DATAOUT  (29)       /* connected to AC97 codec */
#define H5000_GPIO_I2S_DATAIN   (30)       /* connected to AC97 codec */
#define H5000_GPIO_I2S_LRCLK    (31)       /* connected to AC97 codec */
#define H5000_GPIO_I2S_SYSCLK   (32)       /* connected to AC97 codec */
/*(33) is CS5# */
#define H5000_GPIO_COM_RXD      (34)       /* connected to cradle/cable connector */
#define H5000_GPIO_COM_CTS      (35)       /* connected to cradle/cable connector */
#define H5000_GPIO_COM_DCD      (36)       /* connected to cradle/cable connector */
#define H5000_GPIO_COM_DSR      (37)       /* connected to cradle/cable connector */
#define H5000_GPIO_COM_RI       (38)       /* connected to cradle/cable connector */
#define H5000_GPIO_COM_TXD      (39)       /* connected to cradle/cable connector */
#define H5000_GPIO_COM_DTR      (40)       /* connected to cradle/cable connector */
#define H5000_GPIO_COM_RTS      (41)       /* connected to cradle/cable connector */

#define H5000_GPIO_BT_RXD       (42)       /* connected to BT (LMX9814) */
#define H5000_GPIO_BT_TXD       (43)       /* connected to BT (LMX9814) */
#define H5000_GPIO_BT_CTS       (44)       /* connected to BT (LMX9814) */
#define H5000_GPIO_BT_RTS       (45)       /* connected to BT (LMX9814) */

#define H5000_GPIO_IRDA_RXD     (46)
#define H5000_GPIO_IRDA_TXD     (47)

#define H5000_GPIO_POE_N        (48)       /* used for pcmcia */
#define H5000_GPIO_PWE_N        (49)       /* used for pcmcia */
#define H5000_GPIO_PIOR_N       (50)       /* used for pcmcia */
#define H5000_GPIO_PIOW_N       (51)       /* used for pcmcia */
#define H5000_GPIO_PCE1_N       (52)       /* used for pcmcia */
#define H5000_GPIO_PCE2_N       (53)       /* used for pcmcia */
#define H5000_GPIO_PSKTSEL      (54)       /* used for pcmcia */
#define H5000_GPIO_PREG_N       (55)       /* used for pcmcia */
#define H5000_GPIO_PWAIT_N      (56)       /* used for pcmcia */
#define H5000_GPIO_IOIS16_N     (57)       /* used for pcmcia */

#define H5000_GPIO_IRDA_SD      (58)       /* to hsdl3002 sd */
/*(59) not connected */
#define H5000_GPIO_POWER_SD_N   (60)       /* controls power to SD */
#define H5000_GPIO_POWER_RS232_N	(61)       /* inverted FORCEON to rs232 transceiver */
#define H5000_GPIO_POWER_ACCEL_N	(62)       /* controls power to accel */
/*(63) is not connected */
#define H5000_GPIO_OPT_NVRAM    (64)       /* controls power to expansion pack */
#define H5000_GPIO_CHG_EN       (65)       /* to sc801 en */
#define H5000_GPIO_USB_PULLUP   (66)       /* USB d+ pullup via 1.5K resistor */
#define H5000_GPIO_BT_2V8_N     (67)       /* 2.8V used by bluetooth */
#define H5000_GPIO_EXT_CHG_RATE (68)       /* enables external charging rate */
/*(69) is not connected */
#define H5000_GPIO_CIR_RESET    (70)       /* consumer IR reset */
#define H5000_GPIO_POWER_LIGHT_SENSOR_N	(71)
#define H5000_GPIO_BT_M_RESET   (72)
#define H5000_GPIO_STD_CHG_RATE (73)
#define H5000_GPIO_SD_WP_N      (74)
#define H5000_GPIO_MOTOR_ON_N   (75)       /* external pullup on this */
#define H5000_GPIO_HEADPHONE_DETECT	(76)
#define H5000_GPIO_USB_CHG_RATE (77)       /* select rate for charging via usb */
/*(78) is CS2# */
/*(79) is CS3# */
/*(80) is CS4# */

#endif /* __ASM_ARCH_H5000_H */
Commit	Line	Data
bc2fd1c0 AV	1	/*
	2	* Hardware definitions for HP iPAQ h5xxx Handheld Computers
	3	*
	4	* Copyright(20)02 Hewlett-Packard Company.
	5	*
	6	* This program is free software; you can redistribute it and/or modify
	7	* it under the terms of the GNU General Public License as published by
	8	* the Free Software Foundation; either version 2 of the License, or
	9	* (at your option) any later version.
	10	*
	11	* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
	12	* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
	13	* FITNESS FOR ANY PARTICULAR PURPOSE.
	14	*
	15	* Author: Jamey Hicks
	16	*/
	17
	18	#ifndef __ASM_ARCH_H5000_H
	19	#define __ASM_ARCH_H5000_H
	20
	21	#include <mach/mfp-pxa25x.h>
	22
	23	/*
	24	* CPU GPIOs
	25	*/
	26
	27	#define H5000_GPIO_POWER_BUTTON (0)
	28	#define H5000_GPIO_RESET_BUTTON_N (1)
	29	#define H5000_GPIO_OPT_INT (2)
	30	#define H5000_GPIO_BACKUP_POWER (3)
	31	#define H5000_GPIO_ACTION_BUTTON (4)
	32	#define H5000_GPIO_COM_DCD_SOMETHING (5) /* what is this really ? */
	33	/* 6 not connected */
	34	#define H5000_GPIO_RESET_BUTTON_AGAIN_N (7) /* connected to gpio 1 as well */
	35	/* 8 not connected */
	36	#define H5000_GPIO_RSO_N (9) /* reset output from max1702 which regulates 3.3 and 2.5 */
	37	#define H5000_GPIO_ASIC_INT_N (10) /* from companion asic */
	38	#define H5000_GPIO_BT_ENV_0 (11) /* to LMX9814, set to 1 according to regdump */
	39	/(12) not connected /
	40	#define H5000_GPIO_BT_ENV_1 (13) /* to LMX9814, set to 1 according to regdump */
	41	#define H5000_GPIO_BT_WU (14) /* from LMX9814, Defined as HOST_WAKEUP in the LMX9820 data sheet */
	42	/(15) is CS1# /
	43	/(16) not connected /
	44	/(17) not connected /
	45	/(18) is pcmcia ready /
	46	/(19) is dreq1 /
	47	/(20) is dreq0 /
	48	#define H5000_GPIO_OE_RD_NWR (21) /* output enable on rd/nwr signal to companion asic */
	49	/(22) is not connected /
	50	#define H5000_GPIO_OPT_SPI_CLK (23) /* to extension pack */
	51	#define H5000_GPIO_OPT_SPI_CS_N (24) /* to extension pack */
	52	#define H5000_GPIO_OPT_SPI_DOUT (25) /* to extension pack */
	53	#define H5000_GPIO_OPT_SPI_DIN (26) /* to extension pack */
	54	/(27) not connected /
	55	#define H5000_GPIO_I2S_BITCLK (28) /* connected to AC97 codec */
	56	#define H5000_GPIO_I2S_DATAOUT (29) /* connected to AC97 codec */
	57	#define H5000_GPIO_I2S_DATAIN (30) /* connected to AC97 codec */
	58	#define H5000_GPIO_I2S_LRCLK (31) /* connected to AC97 codec */
	59	#define H5000_GPIO_I2S_SYSCLK (32) /* connected to AC97 codec */
	60	/(33) is CS5# /
	61	#define H5000_GPIO_COM_RXD (34) /* connected to cradle/cable connector */
	62	#define H5000_GPIO_COM_CTS (35) /* connected to cradle/cable connector */
	63	#define H5000_GPIO_COM_DCD (36) /* connected to cradle/cable connector */
	64	#define H5000_GPIO_COM_DSR (37) /* connected to cradle/cable connector */
65	#define H5000_GPIO_COM_RI (38) /* connected to cradle/cable connector */
66	#define H5000_GPIO_COM_TXD (39) /* connected to cradle/cable connector */
67	#define H5000_GPIO_COM_DTR (40) /* connected to cradle/cable connector */
68	#define H5000_GPIO_COM_RTS (41) /* connected to cradle/cable connector */
69
70	#define H5000_GPIO_BT_RXD (42) /* connected to BT (LMX9814) */
71	#define H5000_GPIO_BT_TXD (43) /* connected to BT (LMX9814) */
72	#define H5000_GPIO_BT_CTS (44) /* connected to BT (LMX9814) */
73	#define H5000_GPIO_BT_RTS (45) /* connected to BT (LMX9814) */
74
75	#define H5000_GPIO_IRDA_RXD (46)
76	#define H5000_GPIO_IRDA_TXD (47)
77
78	#define H5000_GPIO_POE_N (48) /* used for pcmcia */
79	#define H5000_GPIO_PWE_N (49) /* used for pcmcia */
80	#define H5000_GPIO_PIOR_N (50) /* used for pcmcia */
81	#define H5000_GPIO_PIOW_N (51) /* used for pcmcia */
82	#define H5000_GPIO_PCE1_N (52) /* used for pcmcia */
83	#define H5000_GPIO_PCE2_N (53) /* used for pcmcia */
84	#define H5000_GPIO_PSKTSEL (54) /* used for pcmcia */
85	#define H5000_GPIO_PREG_N (55) /* used for pcmcia */
86	#define H5000_GPIO_PWAIT_N (56) /* used for pcmcia */
87	#define H5000_GPIO_IOIS16_N (57) /* used for pcmcia */
88
89	#define H5000_GPIO_IRDA_SD (58) /* to hsdl3002 sd */
90	/(59) not connected /
91	#define H5000_GPIO_POWER_SD_N (60) /* controls power to SD */
92	#define H5000_GPIO_POWER_RS232_N (61) /* inverted FORCEON to rs232 transceiver */
93	#define H5000_GPIO_POWER_ACCEL_N (62) /* controls power to accel */
94	/(63) is not connected /
95	#define H5000_GPIO_OPT_NVRAM (64) /* controls power to expansion pack */
96	#define H5000_GPIO_CHG_EN (65) /* to sc801 en */
97	#define H5000_GPIO_USB_PULLUP (66) /* USB d+ pullup via 1.5K resistor */
98	#define H5000_GPIO_BT_2V8_N (67) /* 2.8V used by bluetooth */
99	#define H5000_GPIO_EXT_CHG_RATE (68) /* enables external charging rate */
100	/(69) is not connected /
101	#define H5000_GPIO_CIR_RESET (70) /* consumer IR reset */
102	#define H5000_GPIO_POWER_LIGHT_SENSOR_N (71)
103	#define H5000_GPIO_BT_M_RESET (72)
104	#define H5000_GPIO_STD_CHG_RATE (73)
105	#define H5000_GPIO_SD_WP_N (74)
106	#define H5000_GPIO_MOTOR_ON_N (75) /* external pullup on this */
107	#define H5000_GPIO_HEADPHONE_DETECT (76)
108	#define H5000_GPIO_USB_CHG_RATE (77) /* select rate for charging via usb */
109	/(78) is CS2# /
110	/(79) is CS3# /
111	/(80) is CS4# /
112
113	#endif /* __ASM_ARCH_H5000_H */