[linux-2.6-block.git] / arch / arm / mach-pxa / cm-x270.c

/*
 * linux/arch/arm/mach-pxa/cm-x270.c
 *
 * Copyright (C) 2007, 2008 CompuLab, Ltd.
 * Mike Rapoport <mike@compulab.co.il>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/delay.h>

#include <linux/rtc-v3020.h>
#include <video/mbxfb.h>

#include <linux/spi/spi.h>
#include <linux/spi/libertas_spi.h>

#include <mach/pxa27x.h>
#include <mach/ohci.h>
#include <mach/mmc.h>
#include <mach/pxa2xx_spi.h>

#include "generic.h"

/* physical address if local-bus attached devices */
#define RTC_PHYS_BASE		(PXA_CS1_PHYS + (5 << 22))

/* GPIO IRQ usage */
#define GPIO83_MMC_IRQ		(83)

#define CMX270_MMC_IRQ		IRQ_GPIO(GPIO83_MMC_IRQ)

/* MMC power enable */
#define GPIO105_MMC_POWER	(105)

/* WLAN GPIOS */
#define GPIO19_WLAN_STRAP	(19)
#define GPIO102_WLAN_RST	(102)

static unsigned long cmx270_pin_config[] = {
	/* AC'97 */
	GPIO28_AC97_BITCLK,
	GPIO29_AC97_SDATA_IN_0,
	GPIO30_AC97_SDATA_OUT,
	GPIO31_AC97_SYNC,
	GPIO98_AC97_SYSCLK,
	GPIO113_AC97_nRESET,

	/* BTUART */
	GPIO42_BTUART_RXD,
	GPIO43_BTUART_TXD,
	GPIO44_BTUART_CTS,
	GPIO45_BTUART_RTS,

	/* STUART */
	GPIO46_STUART_RXD,
	GPIO47_STUART_TXD,

	/* MCI controller */
	GPIO32_MMC_CLK,
	GPIO112_MMC_CMD,
	GPIO92_MMC_DAT_0,
	GPIO109_MMC_DAT_1,
	GPIO110_MMC_DAT_2,
	GPIO111_MMC_DAT_3,

	/* LCD */
	GPIOxx_LCD_TFT_16BPP,

	/* I2C */
	GPIO117_I2C_SCL,
	GPIO118_I2C_SDA,

	/* SSP1 */
	GPIO23_SSP1_SCLK,
	GPIO24_SSP1_SFRM,
	GPIO25_SSP1_TXD,
	GPIO26_SSP1_RXD,

	/* SSP2 */
	GPIO19_GPIO,	/* SSP2 clock is used as GPIO for Libertas pin-strap */
	GPIO14_GPIO,
	GPIO87_SSP2_TXD,
	GPIO88_SSP2_RXD,

	/* PC Card */
	GPIO48_nPOE,
	GPIO49_nPWE,
	GPIO50_nPIOR,
	GPIO51_nPIOW,
	GPIO85_nPCE_1,
	GPIO54_nPCE_2,
	GPIO55_nPREG,
	GPIO56_nPWAIT,
	GPIO57_nIOIS16,

	/* SDRAM and local bus */
	GPIO15_nCS_1,
	GPIO78_nCS_2,
	GPIO79_nCS_3,
	GPIO80_nCS_4,
	GPIO33_nCS_5,
	GPIO49_nPWE,
	GPIO18_RDY,

	/* GPIO */
	GPIO0_GPIO	| WAKEUP_ON_EDGE_BOTH,
	GPIO105_GPIO	| MFP_LPM_DRIVE_HIGH,	/* MMC/SD power */
	GPIO53_GPIO,				/* PC card reset */
	GPIO102_GPIO,				/* WLAN reset */

	/* NAND controls */
	GPIO11_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
	GPIO89_GPIO,				/* NAND Ready/Busy */

	/* interrupts */
	GPIO10_GPIO,	/* DM9000 interrupt */
	GPIO83_GPIO,	/* MMC card detect */
	GPIO95_GPIO,	/* WLAN interrupt */
};

/* V3020 RTC */
#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
static struct resource cmx270_v3020_resource[] = {
	[0] = {
		.start = RTC_PHYS_BASE,
		.end   = RTC_PHYS_BASE + 4,
		.flags = IORESOURCE_MEM,
	},
};

struct v3020_platform_data cmx270_v3020_pdata = {
	.leftshift = 16,
};

static struct platform_device cmx270_rtc_device = {
	.name		= "v3020",
	.num_resources	= ARRAY_SIZE(cmx270_v3020_resource),
	.resource	= cmx270_v3020_resource,
	.id		= -1,
	.dev		= {
		.platform_data = &cmx270_v3020_pdata,
	}
};

static void __init cmx270_init_rtc(void)
{
	platform_device_register(&cmx270_rtc_device);
}
#else
static inline void cmx270_init_rtc(void) {}
#endif

/* 2700G graphics */
#if defined(CONFIG_FB_MBX) || defined(CONFIG_FB_MBX_MODULE)
static u64 fb_dma_mask = ~(u64)0;

static struct resource cmx270_2700G_resource[] = {
	/* frame buffer memory including ODFB and External SDRAM */
	[0] = {
		.start = PXA_CS2_PHYS,
		.end   = PXA_CS2_PHYS + 0x01ffffff,
		.flags = IORESOURCE_MEM,
	},
	/* Marathon registers */
	[1] = {
		.start = PXA_CS2_PHYS + 0x03fe0000,
		.end   = PXA_CS2_PHYS + 0x03ffffff,
		.flags = IORESOURCE_MEM,
	},
};

static unsigned long cmx270_marathon_on[] = {
	GPIO58_GPIO,
	GPIO59_GPIO,
	GPIO60_GPIO,
	GPIO61_GPIO,
	GPIO62_GPIO,
	GPIO63_GPIO,
	GPIO64_GPIO,
	GPIO65_GPIO,
	GPIO66_GPIO,
	GPIO67_GPIO,
	GPIO68_GPIO,
	GPIO69_GPIO,
	GPIO70_GPIO,
	GPIO71_GPIO,
	GPIO72_GPIO,
	GPIO73_GPIO,
	GPIO74_GPIO,
	GPIO75_GPIO,
	GPIO76_GPIO,
	GPIO77_GPIO,
};

static unsigned long cmx270_marathon_off[] = {
	GPIOxx_LCD_TFT_16BPP,
};

static int cmx270_marathon_probe(struct fb_info *fb)
{
	int gpio, err;

	for (gpio = 58; gpio <= 77; gpio++) {
		err = gpio_request(gpio, "LCD");
		if (err)
			return err;
		gpio_direction_input(gpio);
	}

	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_on));
	return 0;
}

static int cmx270_marathon_remove(struct fb_info *fb)
{
	int gpio;

	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_off));

	for (gpio = 58; gpio <= 77; gpio++)
		gpio_free(gpio);

	return 0;
}

static struct mbxfb_platform_data cmx270_2700G_data = {
	.xres = {
		.min = 240,
		.max = 1200,
		.defval = 640,
	},
	.yres = {
		.min = 240,
		.max = 1200,
		.defval = 480,
	},
	.bpp = {
		.min = 16,
		.max = 32,
		.defval = 16,
	},
	.memsize = 8*1024*1024,
	.probe = cmx270_marathon_probe,
	.remove = cmx270_marathon_remove,
};

static struct platform_device cmx270_2700G = {
	.name		= "mbx-fb",
	.dev		= {
		.platform_data	= &cmx270_2700G_data,
		.dma_mask	= &fb_dma_mask,
		.coherent_dma_mask = 0xffffffff,
	},
	.num_resources	= ARRAY_SIZE(cmx270_2700G_resource),
	.resource	= cmx270_2700G_resource,
	.id		= -1,
};

static void __init cmx270_init_2700G(void)
{
	platform_device_register(&cmx270_2700G);
}
#else
static inline void cmx270_init_2700G(void) {}
#endif

/* PXA27x OHCI controller setup */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static struct pxaohci_platform_data cmx270_ohci_platform_data = {
	.port_mode	= PMM_PERPORT_MODE,
	.flags		= ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
};

static void __init cmx270_init_ohci(void)
{
	pxa_set_ohci_info(&cmx270_ohci_platform_data);
}
#else
static inline void cmx270_init_ohci(void) {}
#endif

#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
static struct pxamci_platform_data cmx270_mci_platform_data = {
	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
	.gpio_card_detect	= GPIO83_MMC_IRQ,
	.gpio_card_ro		= -1,
	.gpio_power		= GPIO105_MMC_POWER,
	.gpio_power_invert	= 1,
};

static void __init cmx270_init_mmc(void)
{
	pxa_set_mci_info(&cmx270_mci_platform_data);
}
#else
static inline void cmx270_init_mmc(void) {}
#endif

#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
static struct pxa2xx_spi_master cm_x270_spi_info = {
	.num_chipselect	= 1,
	.enable_dma	= 1,
};

static struct pxa2xx_spi_chip cm_x270_libertas_chip = {
	.rx_threshold	= 1,
	.tx_threshold	= 1,
	.timeout	= 1000,
	.gpio_cs	= 14,
};

static unsigned long cm_x270_libertas_pin_config[] = {
	/* SSP2 */
	GPIO19_SSP2_SCLK,
	GPIO14_GPIO,
	GPIO87_SSP2_TXD,
	GPIO88_SSP2_RXD,

};

static int cm_x270_libertas_setup(struct spi_device *spi)
{
	int err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP");
	if (err)
		return err;

	err = gpio_request(GPIO102_WLAN_RST, "WLAN RST");
	if (err)
		goto err_free_strap;

	err = gpio_direction_output(GPIO102_WLAN_RST, 0);
	if (err)
		goto err_free_strap;
	msleep(100);

	err = gpio_direction_output(GPIO19_WLAN_STRAP, 1);
	if (err)
		goto err_free_strap;
	msleep(100);

	pxa2xx_mfp_config(ARRAY_AND_SIZE(cm_x270_libertas_pin_config));

	gpio_set_value(GPIO102_WLAN_RST, 1);
	msleep(100);

	spi->bits_per_word = 16;
	spi_setup(spi);

	return 0;

err_free_strap:
	gpio_free(GPIO19_WLAN_STRAP);

	return err;
}

static int cm_x270_libertas_teardown(struct spi_device *spi)
{
	gpio_set_value(GPIO102_WLAN_RST, 0);
	gpio_free(GPIO102_WLAN_RST);
	gpio_free(GPIO19_WLAN_STRAP);

	return 0;
}

struct libertas_spi_platform_data cm_x270_libertas_pdata = {
	.use_dummy_writes	= 1,
	.setup			= cm_x270_libertas_setup,
	.teardown		= cm_x270_libertas_teardown,
};

static struct spi_board_info cm_x270_spi_devices[] __initdata = {
	{
		.modalias		= "libertas_spi",
		.max_speed_hz		= 13000000,
		.bus_num		= 2,
		.irq			= gpio_to_irq(95),
		.chip_select		= 0,
		.controller_data	= &cm_x270_libertas_chip,
		.platform_data		= &cm_x270_libertas_pdata,
	},
};

static void __init cmx270_init_spi(void)
{
	pxa2xx_set_spi_info(2, &cm_x270_spi_info);
	spi_register_board_info(ARRAY_AND_SIZE(cm_x270_spi_devices));
}
#else
static inline void cmx270_init_spi(void) {}
#endif

void __init cmx270_init(void)
{
	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));

#ifdef CONFIG_PM
	pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
#endif

	cmx270_init_rtc();
	cmx270_init_mmc();
	cmx270_init_ohci();
	cmx270_init_2700G();
	cmx270_init_spi();
}
Commit	Line	Data
4adc5fb6 MR	1	/*
	2	* linux/arch/arm/mach-pxa/cm-x270.c
	3	*
	4	* Copyright (C) 2007, 2008 CompuLab, Ltd.
	5	* Mike Rapoport <mike@compulab.co.il>
	6	*
	7	* This program is free software; you can redistribute it and/or modify
	8	* it under the terms of the GNU General Public License version 2 as
	9	* published by the Free Software Foundation.
	10	*/
	11
	12	#include <linux/platform_device.h>
	13	#include <linux/sysdev.h>
	14	#include <linux/irq.h>
	15	#include <linux/gpio.h>
a2099e49	16	#include <linux/delay.h>
4adc5fb6 MR	17
	18	#include <linux/rtc-v3020.h>
	19	#include <video/mbxfb.h>
	20
a2099e49 MR	21	#include <linux/spi/spi.h>
	22	#include <linux/spi/libertas_spi.h>
	23
51c62982	24	#include <mach/pxa27x.h>
4adc5fb6 MR	25	#include <mach/ohci.h>
4adc5fb6 MR	26	#include <mach/mmc.h>
a2099e49	27	#include <mach/pxa2xx_spi.h>
4adc5fb6 MR	28
	29	#include "generic.h"
	30
	31	/* physical address if local-bus attached devices */
	32	#define RTC_PHYS_BASE (PXA_CS1_PHYS + (5 << 22))
	33
	34	/* GPIO IRQ usage */
	35	#define GPIO83_MMC_IRQ (83)
	36
	37	#define CMX270_MMC_IRQ IRQ_GPIO(GPIO83_MMC_IRQ)
	38
	39	/* MMC power enable */
	40	#define GPIO105_MMC_POWER (105)
	41
a2099e49 MR	42	/* WLAN GPIOS */
	43	#define GPIO19_WLAN_STRAP (19)
	44	#define GPIO102_WLAN_RST (102)
	45
4adc5fb6 MR	46	static unsigned long cmx270_pin_config[] = {
	47	/* AC'97 */
	48	GPIO28_AC97_BITCLK,
	49	GPIO29_AC97_SDATA_IN_0,
	50	GPIO30_AC97_SDATA_OUT,
	51	GPIO31_AC97_SYNC,
	52	GPIO98_AC97_SYSCLK,
	53	GPIO113_AC97_nRESET,
	54
	55	/* BTUART */
	56	GPIO42_BTUART_RXD,
	57	GPIO43_BTUART_TXD,
	58	GPIO44_BTUART_CTS,
	59	GPIO45_BTUART_RTS,
	60
	61	/* STUART */
	62	GPIO46_STUART_RXD,
	63	GPIO47_STUART_TXD,
	64
	65	/* MCI controller */
	66	GPIO32_MMC_CLK,
	67	GPIO112_MMC_CMD,
	68	GPIO92_MMC_DAT_0,
	69	GPIO109_MMC_DAT_1,
	70	GPIO110_MMC_DAT_2,
	71	GPIO111_MMC_DAT_3,
	72
	73	/* LCD */
bedbda97	74	GPIOxx_LCD_TFT_16BPP,
4adc5fb6 MR	75
	76	/* I2C */
	77	GPIO117_I2C_SCL,
	78	GPIO118_I2C_SDA,
	79
	80	/* SSP1 */
	81	GPIO23_SSP1_SCLK,
	82	GPIO24_SSP1_SFRM,
	83	GPIO25_SSP1_TXD,
	84	GPIO26_SSP1_RXD,
	85
	86	/* SSP2 */
a2099e49 MR	87	GPIO19_GPIO, /* SSP2 clock is used as GPIO for Libertas pin-strap */
a2099e49 MR	88	GPIO14_GPIO,
4adc5fb6 MR	89	GPIO87_SSP2_TXD,
	90	GPIO88_SSP2_RXD,
	91
	92	/* PC Card */
	93	GPIO48_nPOE,
	94	GPIO49_nPWE,
	95	GPIO50_nPIOR,
	96	GPIO51_nPIOW,
	97	GPIO85_nPCE_1,
	98	GPIO54_nPCE_2,
	99	GPIO55_nPREG,
	100	GPIO56_nPWAIT,
	101	GPIO57_nIOIS16,
	102
	103	/* SDRAM and local bus */
	104	GPIO15_nCS_1,
	105	GPIO78_nCS_2,
	106	GPIO79_nCS_3,
	107	GPIO80_nCS_4,
	108	GPIO33_nCS_5,
	109	GPIO49_nPWE,
	110	GPIO18_RDY,
	111
	112	/* GPIO */
	113	GPIO0_GPIO \| WAKEUP_ON_EDGE_BOTH,
	114	GPIO105_GPIO \| MFP_LPM_DRIVE_HIGH, /* MMC/SD power */
	115	GPIO53_GPIO, /* PC card reset */
a2099e49	116	GPIO102_GPIO, /* WLAN reset */
4adc5fb6 MR	117
	118	/* NAND controls */
	119	GPIO11_GPIO \| MFP_LPM_DRIVE_HIGH, /* NAND CE# */
	120	GPIO89_GPIO, /* NAND Ready/Busy */
	121
	122	/* interrupts */
	123	GPIO10_GPIO, /* DM9000 interrupt */
	124	GPIO83_GPIO, /* MMC card detect */
a2099e49	125	GPIO95_GPIO, /* WLAN interrupt */
4adc5fb6 MR	126	};
	127
	128	/* V3020 RTC */
	129	#if defined(CONFIG_RTC_DRV_V3020) \|\| defined(CONFIG_RTC_DRV_V3020_MODULE)
	130	static struct resource cmx270_v3020_resource[] = {
	131	[0] = {
	132	.start = RTC_PHYS_BASE,
	133	.end = RTC_PHYS_BASE + 4,
	134	.flags = IORESOURCE_MEM,
	135	},
	136	};
	137
	138	struct v3020_platform_data cmx270_v3020_pdata = {
	139	.leftshift = 16,
	140	};
	141
	142	static struct platform_device cmx270_rtc_device = {
	143	.name = "v3020",
	144	.num_resources = ARRAY_SIZE(cmx270_v3020_resource),
	145	.resource = cmx270_v3020_resource,
	146	.id = -1,
	147	.dev = {
	148	.platform_data = &cmx270_v3020_pdata,
	149	}
	150	};
	151
	152	static void __init cmx270_init_rtc(void)
	153	{
	154	platform_device_register(&cmx270_rtc_device);
	155	}
	156	#else
598dca1f	157	static inline void cmx270_init_rtc(void) {}
4adc5fb6 MR	158	#endif
	159
	160	/* 2700G graphics */
	161	#if defined(CONFIG_FB_MBX) \|\| defined(CONFIG_FB_MBX_MODULE)
	162	static u64 fb_dma_mask = ~(u64)0;
	163
	164	static struct resource cmx270_2700G_resource[] = {
	165	/* frame buffer memory including ODFB and External SDRAM */
	166	[0] = {
	167	.start = PXA_CS2_PHYS,
	168	.end = PXA_CS2_PHYS + 0x01ffffff,
	169	.flags = IORESOURCE_MEM,
	170	},
	171	/* Marathon registers */
	172	[1] = {
	173	.start = PXA_CS2_PHYS + 0x03fe0000,
	174	.end = PXA_CS2_PHYS + 0x03ffffff,
	175	.flags = IORESOURCE_MEM,
	176	},
	177	};
	178
96f6a13a EM	179	static unsigned long cmx270_marathon_on[] = {
	180	GPIO58_GPIO,
	181	GPIO59_GPIO,
	182	GPIO60_GPIO,
	183	GPIO61_GPIO,
	184	GPIO62_GPIO,
	185	GPIO63_GPIO,
	186	GPIO64_GPIO,
	187	GPIO65_GPIO,
	188	GPIO66_GPIO,
	189	GPIO67_GPIO,
	190	GPIO68_GPIO,
	191	GPIO69_GPIO,
	192	GPIO70_GPIO,
	193	GPIO71_GPIO,
	194	GPIO72_GPIO,
	195	GPIO73_GPIO,
	196	GPIO74_GPIO,
	197	GPIO75_GPIO,
	198	GPIO76_GPIO,
	199	GPIO77_GPIO,
	200	};
	201
	202	static unsigned long cmx270_marathon_off[] = {
	203	GPIOxx_LCD_TFT_16BPP,
	204	};
4adc5fb6 MR	205
	206	static int cmx270_marathon_probe(struct fb_info *fb)
	207	{
96f6a13a EM	208	int gpio, err;
	209
	210	for (gpio = 58; gpio <= 77; gpio++) {
	211	err = gpio_request(gpio, "LCD");
	212	if (err)
	213	return err;
	214	gpio_direction_input(gpio);
	215	}
	216
	217	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_on));
4adc5fb6 MR	218	return 0;
	219	}
	220
	221	static int cmx270_marathon_remove(struct fb_info *fb)
	222	{
96f6a13a EM	223	int gpio;
	224
	225	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_off));
	226
	227	for (gpio = 58; gpio <= 77; gpio++)
	228	gpio_free(gpio);
	229
4adc5fb6 MR	230	return 0;
	231	}
	232
	233	static struct mbxfb_platform_data cmx270_2700G_data = {
	234	.xres = {
	235	.min = 240,
	236	.max = 1200,
	237	.defval = 640,
	238	},
	239	.yres = {
	240	.min = 240,
	241	.max = 1200,
	242	.defval = 480,
	243	},
	244	.bpp = {
	245	.min = 16,
	246	.max = 32,
	247	.defval = 16,
	248	},
	249	.memsize = 810241024,
	250	.probe = cmx270_marathon_probe,
	251	.remove = cmx270_marathon_remove,
	252	};
	253
	254	static struct platform_device cmx270_2700G = {
	255	.name = "mbx-fb",
	256	.dev = {
	257	.platform_data = &cmx270_2700G_data,
	258	.dma_mask = &fb_dma_mask,
	259	.coherent_dma_mask = 0xffffffff,
	260	},
	261	.num_resources = ARRAY_SIZE(cmx270_2700G_resource),
	262	.resource = cmx270_2700G_resource,
	263	.id = -1,
	264	};
	265
	266	static void __init cmx270_init_2700G(void)
	267	{
	268	platform_device_register(&cmx270_2700G);
	269	}
	270	#else
	271	static inline void cmx270_init_2700G(void) {}
	272	#endif
	273
	274	/* PXA27x OHCI controller setup */
	275	#if defined(CONFIG_USB_OHCI_HCD) \|\| defined(CONFIG_USB_OHCI_HCD_MODULE)
4adc5fb6 MR	276	static struct pxaohci_platform_data cmx270_ohci_platform_data = {
4adc5fb6 MR	277	.port_mode = PMM_PERPORT_MODE,
097b5334	278	.flags = ENABLE_PORT1 \| ENABLE_PORT2 \| POWER_CONTROL_LOW,
4adc5fb6 MR	279	};
	280
	281	static void __init cmx270_init_ohci(void)
	282	{
	283	pxa_set_ohci_info(&cmx270_ohci_platform_data);
	284	}
	285	#else
	286	static inline void cmx270_init_ohci(void) {}
	287	#endif
	288
	289	#if defined(CONFIG_MMC) \|\| defined(CONFIG_MMC_MODULE)
4adc5fb6	290	static struct pxamci_platform_data cmx270_mci_platform_data = {
7a648256 RJ	291	.ocr_mask = MMC_VDD_32_33\|MMC_VDD_33_34,
	292	.gpio_card_detect = GPIO83_MMC_IRQ,
	293	.gpio_card_ro = -1,
	294	.gpio_power = GPIO105_MMC_POWER,
	295	.gpio_power_invert = 1,
4adc5fb6 MR	296	};
	297
	298	static void __init cmx270_init_mmc(void)
	299	{
	300	pxa_set_mci_info(&cmx270_mci_platform_data);
	301	}
	302	#else
	303	static inline void cmx270_init_mmc(void) {}
	304	#endif
	305
a2099e49 MR	306	#if defined(CONFIG_SPI_PXA2XX) \|\| defined(CONFIG_SPI_PXA2XX_MODULE)
	307	static struct pxa2xx_spi_master cm_x270_spi_info = {
	308	.num_chipselect = 1,
	309	.enable_dma = 1,
	310	};
	311
	312	static struct pxa2xx_spi_chip cm_x270_libertas_chip = {
	313	.rx_threshold = 1,
	314	.tx_threshold = 1,
	315	.timeout = 1000,
	316	.gpio_cs = 14,
	317	};
	318
	319	static unsigned long cm_x270_libertas_pin_config[] = {
	320	/* SSP2 */
	321	GPIO19_SSP2_SCLK,
	322	GPIO14_GPIO,
	323	GPIO87_SSP2_TXD,
	324	GPIO88_SSP2_RXD,
	325
	326	};
	327
	328	static int cm_x270_libertas_setup(struct spi_device *spi)
	329	{
	330	int err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP");
	331	if (err)
	332	return err;
	333
	334	err = gpio_request(GPIO102_WLAN_RST, "WLAN RST");
	335	if (err)
	336	goto err_free_strap;
	337
	338	err = gpio_direction_output(GPIO102_WLAN_RST, 0);
	339	if (err)
	340	goto err_free_strap;
	341	msleep(100);
	342
	343	err = gpio_direction_output(GPIO19_WLAN_STRAP, 1);
	344	if (err)
	345	goto err_free_strap;
	346	msleep(100);
	347
	348	pxa2xx_mfp_config(ARRAY_AND_SIZE(cm_x270_libertas_pin_config));
	349
	350	gpio_set_value(GPIO102_WLAN_RST, 1);
	351	msleep(100);
	352
	353	spi->bits_per_word = 16;
	354	spi_setup(spi);
	355
	356	return 0;
	357
	358	err_free_strap:
	359	gpio_free(GPIO19_WLAN_STRAP);
	360
	361	return err;
	362	}
	363
	364	static int cm_x270_libertas_teardown(struct spi_device *spi)
	365	{
	366	gpio_set_value(GPIO102_WLAN_RST, 0);
	367	gpio_free(GPIO102_WLAN_RST);
	368	gpio_free(GPIO19_WLAN_STRAP);
	369
370	return 0;
371	}
372
373	struct libertas_spi_platform_data cm_x270_libertas_pdata = {
374	.use_dummy_writes = 1,
375	.setup = cm_x270_libertas_setup,
376	.teardown = cm_x270_libertas_teardown,
377	};
378
379	static struct spi_board_info cm_x270_spi_devices[] __initdata = {
380	{
381	.modalias = "libertas_spi",
382	.max_speed_hz = 13000000,
383	.bus_num = 2,
384	.irq = gpio_to_irq(95),
385	.chip_select = 0,
386	.controller_data = &cm_x270_libertas_chip,
387	.platform_data = &cm_x270_libertas_pdata,
388	},
389	};
390
391	static void __init cmx270_init_spi(void)
392	{
393	pxa2xx_set_spi_info(2, &cm_x270_spi_info);
394	spi_register_board_info(ARRAY_AND_SIZE(cm_x270_spi_devices));
395	}
396	#else
397	static inline void cmx270_init_spi(void) {}
398	#endif
399
4adc5fb6 MR	400	void __init cmx270_init(void)
	401	{
	402	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
	403
9599d1db MR	404	#ifdef CONFIG_PM
	405	pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
	406	#endif
	407
4adc5fb6 MR	408	cmx270_init_rtc();
	409	cmx270_init_mmc();
	410	cmx270_init_ohci();
	411	cmx270_init_2700G();
a2099e49	412	cmx270_init_spi();
4adc5fb6	413	}