Commit | Line | Data |
---|---|---|
8f220860 SG |
1 | /* |
2 | * arch/arm/mach-orion5x/d2net-setup.c | |
3 | * | |
4 | * LaCie d2Network and Big Disk Network NAS setup | |
5 | * | |
6 | * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com> | |
7 | * | |
8 | * This file is licensed under the terms of the GNU General Public | |
9 | * License version 2. This program is licensed "as is" without any | |
10 | * warranty of any kind, whether express or implied. | |
11 | */ | |
12 | ||
13 | #include <linux/kernel.h> | |
14 | #include <linux/init.h> | |
15 | #include <linux/platform_device.h> | |
16 | #include <linux/pci.h> | |
17 | #include <linux/irq.h> | |
18 | #include <linux/mtd/physmap.h> | |
19 | #include <linux/mv643xx_eth.h> | |
20 | #include <linux/leds.h> | |
21 | #include <linux/gpio_keys.h> | |
22 | #include <linux/input.h> | |
23 | #include <linux/i2c.h> | |
24 | #include <linux/ata_platform.h> | |
25 | #include <linux/gpio.h> | |
26 | #include <asm/mach-types.h> | |
27 | #include <asm/mach/arch.h> | |
28 | #include <asm/mach/pci.h> | |
29 | #include <mach/orion5x.h> | |
ce91574c | 30 | #include <plat/orion-gpio.h> |
8f220860 SG |
31 | #include "common.h" |
32 | #include "mpp.h" | |
33 | ||
34 | /***************************************************************************** | |
35 | * LaCie d2 Network Info | |
36 | ****************************************************************************/ | |
37 | ||
38 | /* | |
39 | * 512KB NOR flash Device bus boot chip select | |
40 | */ | |
41 | ||
42 | #define D2NET_NOR_BOOT_BASE 0xfff80000 | |
43 | #define D2NET_NOR_BOOT_SIZE SZ_512K | |
44 | ||
45 | /***************************************************************************** | |
46 | * 512KB NOR Flash on Boot Device | |
47 | ****************************************************************************/ | |
48 | ||
49 | /* | |
50 | * TODO: Check write support on flash MX29LV400CBTC-70G | |
51 | */ | |
52 | ||
53 | static struct mtd_partition d2net_partitions[] = { | |
54 | { | |
55 | .name = "Full512kb", | |
56 | .size = MTDPART_SIZ_FULL, | |
57 | .offset = 0, | |
58 | .mask_flags = MTD_WRITEABLE, | |
59 | }, | |
60 | }; | |
61 | ||
62 | static struct physmap_flash_data d2net_nor_flash_data = { | |
63 | .width = 1, | |
64 | .parts = d2net_partitions, | |
65 | .nr_parts = ARRAY_SIZE(d2net_partitions), | |
66 | }; | |
67 | ||
68 | static struct resource d2net_nor_flash_resource = { | |
69 | .flags = IORESOURCE_MEM, | |
70 | .start = D2NET_NOR_BOOT_BASE, | |
71 | .end = D2NET_NOR_BOOT_BASE | |
72 | + D2NET_NOR_BOOT_SIZE - 1, | |
73 | }; | |
74 | ||
75 | static struct platform_device d2net_nor_flash = { | |
76 | .name = "physmap-flash", | |
77 | .id = 0, | |
78 | .dev = { | |
79 | .platform_data = &d2net_nor_flash_data, | |
80 | }, | |
81 | .num_resources = 1, | |
82 | .resource = &d2net_nor_flash_resource, | |
83 | }; | |
84 | ||
85 | /***************************************************************************** | |
86 | * Ethernet | |
87 | ****************************************************************************/ | |
88 | ||
89 | static struct mv643xx_eth_platform_data d2net_eth_data = { | |
90 | .phy_addr = MV643XX_ETH_PHY_ADDR(8), | |
91 | }; | |
92 | ||
93 | /***************************************************************************** | |
94 | * I2C devices | |
95 | ****************************************************************************/ | |
96 | ||
97 | /* | |
98 | * i2c addr | chip | description | |
99 | * 0x32 | Ricoh 5C372b | RTC | |
100 | * 0x3e | GMT G762 | PWM fan controller | |
101 | * 0x50 | HT24LC08 | eeprom (1kB) | |
102 | * | |
103 | * TODO: Add G762 support to the g760a driver. | |
104 | */ | |
105 | static struct i2c_board_info __initdata d2net_i2c_devices[] = { | |
106 | { | |
107 | I2C_BOARD_INFO("rs5c372b", 0x32), | |
108 | }, { | |
109 | I2C_BOARD_INFO("24c08", 0x50), | |
110 | }, | |
111 | }; | |
112 | ||
113 | /***************************************************************************** | |
114 | * SATA | |
115 | ****************************************************************************/ | |
116 | ||
117 | static struct mv_sata_platform_data d2net_sata_data = { | |
118 | .n_ports = 2, | |
119 | }; | |
120 | ||
121 | #define D2NET_GPIO_SATA0_POWER 3 | |
122 | #define D2NET_GPIO_SATA1_POWER 12 | |
123 | ||
124 | static void __init d2net_sata_power_init(void) | |
125 | { | |
126 | int err; | |
127 | ||
128 | err = gpio_request(D2NET_GPIO_SATA0_POWER, "SATA0 power"); | |
129 | if (err == 0) { | |
130 | err = gpio_direction_output(D2NET_GPIO_SATA0_POWER, 1); | |
131 | if (err) | |
132 | gpio_free(D2NET_GPIO_SATA0_POWER); | |
133 | } | |
134 | if (err) | |
135 | pr_err("d2net: failed to configure SATA0 power GPIO\n"); | |
136 | ||
137 | err = gpio_request(D2NET_GPIO_SATA1_POWER, "SATA1 power"); | |
138 | if (err == 0) { | |
139 | err = gpio_direction_output(D2NET_GPIO_SATA1_POWER, 1); | |
140 | if (err) | |
141 | gpio_free(D2NET_GPIO_SATA1_POWER); | |
142 | } | |
143 | if (err) | |
144 | pr_err("d2net: failed to configure SATA1 power GPIO\n"); | |
145 | } | |
146 | ||
147 | /***************************************************************************** | |
148 | * GPIO LED's | |
149 | ****************************************************************************/ | |
150 | ||
151 | /* | |
152 | * The blue front LED is wired to the CPLD and can blink in relation with the | |
7a15726c | 153 | * SATA activity. |
8f220860 SG |
154 | * |
155 | * The following array detail the different LED registers and the combination | |
156 | * of their possible values: | |
157 | * | |
158 | * led_off | blink_ctrl | SATA active | LED state | |
159 | * | | | | |
160 | * 1 | x | x | off | |
161 | * 0 | 0 | 0 | off | |
162 | * 0 | 1 | 0 | blink (rate 300ms) | |
163 | * 0 | x | 1 | on | |
164 | * | |
165 | * Notes: The blue and the red front LED's can't be on at the same time. | |
166 | * Red LED have priority. | |
167 | */ | |
168 | ||
169 | #define D2NET_GPIO_RED_LED 6 | |
170 | #define D2NET_GPIO_BLUE_LED_BLINK_CTRL 16 | |
171 | #define D2NET_GPIO_BLUE_LED_OFF 23 | |
8f220860 SG |
172 | |
173 | static struct gpio_led d2net_leds[] = { | |
174 | { | |
7a15726c SG |
175 | .name = "d2net:blue:sata", |
176 | .default_trigger = "default-on", | |
8f220860 SG |
177 | .gpio = D2NET_GPIO_BLUE_LED_OFF, |
178 | .active_low = 1, | |
179 | }, | |
180 | { | |
181 | .name = "d2net:red:fail", | |
182 | .gpio = D2NET_GPIO_RED_LED, | |
183 | }, | |
184 | }; | |
185 | ||
186 | static struct gpio_led_platform_data d2net_led_data = { | |
187 | .num_leds = ARRAY_SIZE(d2net_leds), | |
188 | .leds = d2net_leds, | |
189 | }; | |
190 | ||
191 | static struct platform_device d2net_gpio_leds = { | |
192 | .name = "leds-gpio", | |
193 | .id = -1, | |
194 | .dev = { | |
195 | .platform_data = &d2net_led_data, | |
196 | }, | |
197 | }; | |
198 | ||
199 | static void __init d2net_gpio_leds_init(void) | |
200 | { | |
7a15726c SG |
201 | int err; |
202 | ||
8f220860 SG |
203 | /* Configure GPIO over MPP max number. */ |
204 | orion_gpio_set_valid(D2NET_GPIO_BLUE_LED_OFF, 1); | |
205 | ||
7a15726c SG |
206 | /* Configure register blink_ctrl to allow SATA activity LED blinking. */ |
207 | err = gpio_request(D2NET_GPIO_BLUE_LED_BLINK_CTRL, "blue LED blink"); | |
208 | if (err == 0) { | |
209 | err = gpio_direction_output(D2NET_GPIO_BLUE_LED_BLINK_CTRL, 1); | |
210 | if (err) | |
211 | gpio_free(D2NET_GPIO_BLUE_LED_BLINK_CTRL); | |
212 | } | |
213 | if (err) | |
214 | pr_err("d2net: failed to configure blue LED blink GPIO\n"); | |
8f220860 | 215 | |
7a15726c | 216 | platform_device_register(&d2net_gpio_leds); |
8f220860 SG |
217 | } |
218 | ||
219 | /**************************************************************************** | |
220 | * GPIO keys | |
221 | ****************************************************************************/ | |
222 | ||
223 | #define D2NET_GPIO_PUSH_BUTTON 18 | |
224 | #define D2NET_GPIO_POWER_SWITCH_ON 8 | |
225 | #define D2NET_GPIO_POWER_SWITCH_OFF 9 | |
226 | ||
227 | #define D2NET_SWITCH_POWER_ON 0x1 | |
228 | #define D2NET_SWITCH_POWER_OFF 0x2 | |
229 | ||
230 | static struct gpio_keys_button d2net_buttons[] = { | |
231 | { | |
232 | .type = EV_SW, | |
233 | .code = D2NET_SWITCH_POWER_OFF, | |
234 | .gpio = D2NET_GPIO_POWER_SWITCH_OFF, | |
235 | .desc = "Power rocker switch (auto|off)", | |
236 | .active_low = 0, | |
237 | }, | |
238 | { | |
239 | .type = EV_SW, | |
240 | .code = D2NET_SWITCH_POWER_ON, | |
241 | .gpio = D2NET_GPIO_POWER_SWITCH_ON, | |
242 | .desc = "Power rocker switch (on|auto)", | |
243 | .active_low = 0, | |
244 | }, | |
245 | { | |
246 | .type = EV_KEY, | |
247 | .code = KEY_POWER, | |
248 | .gpio = D2NET_GPIO_PUSH_BUTTON, | |
249 | .desc = "Front Push Button", | |
250 | .active_low = 0, | |
251 | }, | |
252 | }; | |
253 | ||
254 | static struct gpio_keys_platform_data d2net_button_data = { | |
255 | .buttons = d2net_buttons, | |
256 | .nbuttons = ARRAY_SIZE(d2net_buttons), | |
257 | }; | |
258 | ||
259 | static struct platform_device d2net_gpio_buttons = { | |
260 | .name = "gpio-keys", | |
261 | .id = -1, | |
262 | .dev = { | |
263 | .platform_data = &d2net_button_data, | |
264 | }, | |
265 | }; | |
266 | ||
267 | /***************************************************************************** | |
268 | * General Setup | |
269 | ****************************************************************************/ | |
270 | ||
554cdaef AL |
271 | static unsigned int d2net_mpp_modes[] __initdata = { |
272 | MPP0_GPIO, /* Board ID (bit 0) */ | |
273 | MPP1_GPIO, /* Board ID (bit 1) */ | |
274 | MPP2_GPIO, /* Board ID (bit 2) */ | |
275 | MPP3_GPIO, /* SATA 0 power */ | |
276 | MPP4_UNUSED, | |
277 | MPP5_GPIO, /* Fan fail detection */ | |
278 | MPP6_GPIO, /* Red front LED */ | |
279 | MPP7_UNUSED, | |
280 | MPP8_GPIO, /* Rear power switch (on|auto) */ | |
281 | MPP9_GPIO, /* Rear power switch (auto|off) */ | |
282 | MPP10_UNUSED, | |
283 | MPP11_UNUSED, | |
284 | MPP12_GPIO, /* SATA 1 power */ | |
285 | MPP13_UNUSED, | |
286 | MPP14_SATA_LED, /* SATA 0 active */ | |
287 | MPP15_SATA_LED, /* SATA 1 active */ | |
288 | MPP16_GPIO, /* Blue front LED blink control */ | |
289 | MPP17_UNUSED, | |
290 | MPP18_GPIO, /* Front button (0 = Released, 1 = Pushed ) */ | |
291 | MPP19_UNUSED, | |
292 | 0, | |
8f220860 SG |
293 | /* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */ |
294 | /* 23: Blue front LED off */ | |
295 | /* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */ | |
296 | }; | |
297 | ||
d74b96a7 SG |
298 | #define D2NET_GPIO_INHIBIT_POWER_OFF 24 |
299 | ||
8f220860 SG |
300 | static void __init d2net_init(void) |
301 | { | |
302 | /* | |
303 | * Setup basic Orion functions. Need to be called early. | |
304 | */ | |
305 | orion5x_init(); | |
306 | ||
307 | orion5x_mpp_conf(d2net_mpp_modes); | |
308 | ||
309 | /* | |
310 | * Configure peripherals. | |
311 | */ | |
312 | orion5x_ehci0_init(); | |
313 | orion5x_eth_init(&d2net_eth_data); | |
314 | orion5x_i2c_init(); | |
315 | orion5x_uart0_init(); | |
316 | ||
317 | d2net_sata_power_init(); | |
318 | orion5x_sata_init(&d2net_sata_data); | |
319 | ||
4ca2c040 TP |
320 | mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, |
321 | ORION_MBUS_DEVBUS_BOOT_ATTR, | |
322 | D2NET_NOR_BOOT_BASE, | |
323 | D2NET_NOR_BOOT_SIZE); | |
8f220860 SG |
324 | platform_device_register(&d2net_nor_flash); |
325 | ||
326 | platform_device_register(&d2net_gpio_buttons); | |
327 | ||
328 | d2net_gpio_leds_init(); | |
329 | ||
330 | pr_notice("d2net: Flash write are not yet supported.\n"); | |
331 | ||
332 | i2c_register_board_info(0, d2net_i2c_devices, | |
333 | ARRAY_SIZE(d2net_i2c_devices)); | |
d74b96a7 SG |
334 | |
335 | orion_gpio_set_valid(D2NET_GPIO_INHIBIT_POWER_OFF, 1); | |
8f220860 SG |
336 | } |
337 | ||
338 | /* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */ | |
339 | ||
340 | #ifdef CONFIG_MACH_D2NET | |
341 | MACHINE_START(D2NET, "LaCie d2 Network") | |
65aa1b1e | 342 | .atag_offset = 0x100, |
8f220860 SG |
343 | .init_machine = d2net_init, |
344 | .map_io = orion5x_map_io, | |
4ee1f6b5 | 345 | .init_early = orion5x_init_early, |
8f220860 | 346 | .init_irq = orion5x_init_irq, |
6bb27d73 | 347 | .init_time = orion5x_timer_init, |
8f220860 | 348 | .fixup = tag_fixup_mem32, |
764cbcc2 | 349 | .restart = orion5x_restart, |
8f220860 SG |
350 | MACHINE_END |
351 | #endif | |
352 | ||
353 | #ifdef CONFIG_MACH_BIGDISK | |
354 | MACHINE_START(BIGDISK, "LaCie Big Disk Network") | |
65aa1b1e | 355 | .atag_offset = 0x100, |
8f220860 SG |
356 | .init_machine = d2net_init, |
357 | .map_io = orion5x_map_io, | |
4ee1f6b5 | 358 | .init_early = orion5x_init_early, |
8f220860 | 359 | .init_irq = orion5x_init_irq, |
6bb27d73 | 360 | .init_time = orion5x_timer_init, |
8f220860 | 361 | .fixup = tag_fixup_mem32, |
764cbcc2 | 362 | .restart = orion5x_restart, |
8f220860 SG |
363 | MACHINE_END |
364 | #endif | |
365 |