Commit | Line | Data |
---|---|---|
d2912cb1 | 1 | /* SPDX-License-Identifier: GPL-2.0-only */ |
b2b9762f SS |
2 | /* |
3 | * OMAP44xx sleep code. | |
4 | * | |
5 | * Copyright (C) 2011 Texas Instruments, Inc. | |
6 | * Santosh Shilimkar <santosh.shilimkar@ti.com> | |
b2b9762f SS |
7 | */ |
8 | ||
9 | #include <linux/linkage.h> | |
6ebbf2ce | 10 | #include <asm/assembler.h> |
b2b9762f SS |
11 | #include <asm/smp_scu.h> |
12 | #include <asm/memory.h> | |
13 | #include <asm/hardware/cache-l2x0.h> | |
14 | ||
c1db9d73 | 15 | #include "omap-secure.h" |
b2b9762f SS |
16 | |
17 | #include "common.h" | |
c49f34bc | 18 | #include "omap44xx.h" |
b2b9762f SS |
19 | #include "omap4-sar-layout.h" |
20 | ||
3fe1ee40 SA |
21 | .arch armv7-a |
22 | ||
b2b9762f SS |
23 | #if defined(CONFIG_SMP) && defined(CONFIG_PM) |
24 | ||
3fe1ee40 | 25 | .arch_extension sec |
b2b9762f SS |
26 | .macro DO_SMC |
27 | dsb | |
28 | smc #0 | |
29 | dsb | |
30 | .endm | |
31 | ||
b46355a9 NM |
32 | #ifdef CONFIG_ARCH_OMAP4 |
33 | ||
b2b9762f SS |
34 | /* |
35 | * ============================= | |
36 | * == CPU suspend finisher == | |
37 | * ============================= | |
38 | * | |
39 | * void omap4_finish_suspend(unsigned long cpu_state) | |
40 | * | |
41 | * This function code saves the CPU context and performs the CPU | |
42 | * power down sequence. Calling WFI effectively changes the CPU | |
43 | * power domains states to the desired target power state. | |
44 | * | |
45 | * @cpu_state : contains context save state (r0) | |
46 | * 0 - No context lost | |
47 | * 1 - CPUx L1 and logic lost: MPUSS CSWR | |
48 | * 2 - CPUx L1 and logic lost + GIC lost: MPUSS OSWR | |
49 | * 3 - CPUx L1 and logic lost + GIC + L2 lost: MPUSS OFF | |
50 | * @return: This function never returns for CPU OFF and DORMANT power states. | |
51 | * Post WFI, CPU transitions to DORMANT or OFF power state and on wake-up | |
52 | * from this follows a full CPU reset path via ROM code to CPU restore code. | |
53 | * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET. | |
54 | * It returns to the caller for CPU INACTIVE and ON power states or in case | |
55 | * CPU failed to transition to targeted OFF/DORMANT state. | |
5b6e3eb5 SS |
56 | * |
57 | * omap4_finish_suspend() calls v7_flush_dcache_all() which doesn't save | |
58 | * stack frame and it expects the caller to take care of it. Hence the entire | |
59 | * stack frame is saved to avoid possible stack corruption. | |
b2b9762f SS |
60 | */ |
61 | ENTRY(omap4_finish_suspend) | |
5b6e3eb5 | 62 | stmfd sp!, {r4-r12, lr} |
b2b9762f SS |
63 | cmp r0, #0x0 |
64 | beq do_WFI @ No lowpower state, jump to WFI | |
65 | ||
66 | /* | |
67 | * Flush all data from the L1 data cache before disabling | |
68 | * SCTLR.C bit. | |
69 | */ | |
70 | bl omap4_get_sar_ram_base | |
71 | ldr r9, [r0, #OMAP_TYPE_OFFSET] | |
72 | cmp r9, #0x1 @ Check for HS device | |
73 | bne skip_secure_l1_clean | |
74 | mov r0, #SCU_PM_NORMAL | |
75 | mov r1, #0xFF @ clean seucre L1 | |
76 | stmfd r13!, {r4-r12, r14} | |
77 | ldr r12, =OMAP4_MON_SCU_PWR_INDEX | |
78 | DO_SMC | |
79 | ldmfd r13!, {r4-r12, r14} | |
80 | skip_secure_l1_clean: | |
81 | bl v7_flush_dcache_all | |
82 | ||
83 | /* | |
84 | * Clear the SCTLR.C bit to prevent further data cache | |
85 | * allocation. Clearing SCTLR.C would make all the data accesses | |
86 | * strongly ordered and would not hit the cache. | |
87 | */ | |
88 | mrc p15, 0, r0, c1, c0, 0 | |
89 | bic r0, r0, #(1 << 2) @ Disable the C bit | |
90 | mcr p15, 0, r0, c1, c0, 0 | |
91 | isb | |
92 | ||
2402ff05 | 93 | bl v7_invalidate_l1 |
b2b9762f SS |
94 | |
95 | /* | |
96 | * Switch the CPU from Symmetric Multiprocessing (SMP) mode | |
97 | * to AsymmetricMultiprocessing (AMP) mode by programming | |
98 | * the SCU power status to DORMANT or OFF mode. | |
99 | * This enables the CPU to be taken out of coherency by | |
100 | * preventing the CPU from receiving cache, TLB, or BTB | |
101 | * maintenance operations broadcast by other CPUs in the cluster. | |
102 | */ | |
103 | bl omap4_get_sar_ram_base | |
104 | mov r8, r0 | |
105 | ldr r9, [r8, #OMAP_TYPE_OFFSET] | |
106 | cmp r9, #0x1 @ Check for HS device | |
107 | bne scu_gp_set | |
108 | mrc p15, 0, r0, c0, c0, 5 @ Read MPIDR | |
109 | ands r0, r0, #0x0f | |
110 | ldreq r0, [r8, #SCU_OFFSET0] | |
111 | ldrne r0, [r8, #SCU_OFFSET1] | |
112 | mov r1, #0x00 | |
113 | stmfd r13!, {r4-r12, r14} | |
114 | ldr r12, =OMAP4_MON_SCU_PWR_INDEX | |
115 | DO_SMC | |
116 | ldmfd r13!, {r4-r12, r14} | |
117 | b skip_scu_gp_set | |
118 | scu_gp_set: | |
119 | mrc p15, 0, r0, c0, c0, 5 @ Read MPIDR | |
120 | ands r0, r0, #0x0f | |
121 | ldreq r1, [r8, #SCU_OFFSET0] | |
122 | ldrne r1, [r8, #SCU_OFFSET1] | |
123 | bl omap4_get_scu_base | |
124 | bl scu_power_mode | |
125 | skip_scu_gp_set: | |
126 | mrc p15, 0, r0, c1, c1, 2 @ Read NSACR data | |
127 | tst r0, #(1 << 18) | |
128 | mrcne p15, 0, r0, c1, c0, 1 | |
129 | bicne r0, r0, #(1 << 6) @ Disable SMP bit | |
130 | mcrne p15, 0, r0, c1, c0, 1 | |
131 | isb | |
132 | dsb | |
5e94c6e3 SS |
133 | #ifdef CONFIG_CACHE_L2X0 |
134 | /* | |
135 | * Clean and invalidate the L2 cache. | |
136 | * Common cache-l2x0.c functions can't be used here since it | |
137 | * uses spinlocks. We are out of coherency here with data cache | |
138 | * disabled. The spinlock implementation uses exclusive load/store | |
139 | * instruction which can fail without data cache being enabled. | |
140 | * OMAP4 hardware doesn't support exclusive monitor which can | |
141 | * overcome exclusive access issue. Because of this, CPU can | |
142 | * lead to deadlock. | |
143 | */ | |
144 | bl omap4_get_sar_ram_base | |
145 | mov r8, r0 | |
146 | mrc p15, 0, r5, c0, c0, 5 @ Read MPIDR | |
147 | ands r5, r5, #0x0f | |
148 | ldreq r0, [r8, #L2X0_SAVE_OFFSET0] @ Retrieve L2 state from SAR | |
149 | ldrne r0, [r8, #L2X0_SAVE_OFFSET1] @ memory. | |
150 | cmp r0, #3 | |
151 | bne do_WFI | |
152 | #ifdef CONFIG_PL310_ERRATA_727915 | |
153 | mov r0, #0x03 | |
154 | mov r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX | |
155 | DO_SMC | |
156 | #endif | |
157 | bl omap4_get_l2cache_base | |
158 | mov r2, r0 | |
159 | ldr r0, =0xffff | |
160 | str r0, [r2, #L2X0_CLEAN_INV_WAY] | |
161 | wait: | |
162 | ldr r0, [r2, #L2X0_CLEAN_INV_WAY] | |
163 | ldr r1, =0xffff | |
164 | ands r0, r0, r1 | |
165 | bne wait | |
166 | #ifdef CONFIG_PL310_ERRATA_727915 | |
167 | mov r0, #0x00 | |
168 | mov r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX | |
169 | DO_SMC | |
170 | #endif | |
171 | l2x_sync: | |
172 | bl omap4_get_l2cache_base | |
173 | mov r2, r0 | |
174 | mov r0, #0x0 | |
175 | str r0, [r2, #L2X0_CACHE_SYNC] | |
176 | sync: | |
177 | ldr r0, [r2, #L2X0_CACHE_SYNC] | |
178 | ands r0, r0, #0x1 | |
179 | bne sync | |
180 | #endif | |
b2b9762f SS |
181 | |
182 | do_WFI: | |
183 | bl omap_do_wfi | |
184 | ||
185 | /* | |
186 | * CPU is here when it failed to enter OFF/DORMANT or | |
187 | * no low power state was attempted. | |
188 | */ | |
189 | mrc p15, 0, r0, c1, c0, 0 | |
190 | tst r0, #(1 << 2) @ Check C bit enabled? | |
191 | orreq r0, r0, #(1 << 2) @ Enable the C bit | |
192 | mcreq p15, 0, r0, c1, c0, 0 | |
193 | isb | |
194 | ||
195 | /* | |
196 | * Ensure the CPU power state is set to NORMAL in | |
197 | * SCU power state so that CPU is back in coherency. | |
198 | * In non-coherent mode CPU can lock-up and lead to | |
199 | * system deadlock. | |
200 | */ | |
201 | mrc p15, 0, r0, c1, c0, 1 | |
202 | tst r0, #(1 << 6) @ Check SMP bit enabled? | |
203 | orreq r0, r0, #(1 << 6) | |
204 | mcreq p15, 0, r0, c1, c0, 1 | |
205 | isb | |
206 | bl omap4_get_sar_ram_base | |
207 | mov r8, r0 | |
208 | ldr r9, [r8, #OMAP_TYPE_OFFSET] | |
209 | cmp r9, #0x1 @ Check for HS device | |
210 | bne scu_gp_clear | |
211 | mov r0, #SCU_PM_NORMAL | |
212 | mov r1, #0x00 | |
213 | stmfd r13!, {r4-r12, r14} | |
214 | ldr r12, =OMAP4_MON_SCU_PWR_INDEX | |
215 | DO_SMC | |
216 | ldmfd r13!, {r4-r12, r14} | |
217 | b skip_scu_gp_clear | |
218 | scu_gp_clear: | |
219 | bl omap4_get_scu_base | |
220 | mov r1, #SCU_PM_NORMAL | |
221 | bl scu_power_mode | |
222 | skip_scu_gp_clear: | |
223 | isb | |
224 | dsb | |
5b6e3eb5 | 225 | ldmfd sp!, {r4-r12, pc} |
b2b9762f SS |
226 | ENDPROC(omap4_finish_suspend) |
227 | ||
228 | /* | |
229 | * ============================ | |
230 | * == CPU resume entry point == | |
231 | * ============================ | |
232 | * | |
233 | * void omap4_cpu_resume(void) | |
234 | * | |
235 | * ROM code jumps to this function while waking up from CPU | |
236 | * OFF or DORMANT state. Physical address of the function is | |
237 | * stored in the SAR RAM while entering to OFF or DORMANT mode. | |
238 | * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET. | |
239 | */ | |
240 | ENTRY(omap4_cpu_resume) | |
241 | /* | |
242 | * Configure ACTRL and enable NS SMP bit access on CPU1 on HS device. | |
243 | * OMAP44XX EMU/HS devices - CPU0 SMP bit access is enabled in PPA | |
244 | * init and for CPU1, a secure PPA API provided. CPU0 must be ON | |
245 | * while executing NS_SMP API on CPU1 and PPA version must be 1.4.0+. | |
246 | * OMAP443X GP devices- SMP bit isn't accessible. | |
247 | * OMAP446X GP devices - SMP bit access is enabled on both CPUs. | |
248 | */ | |
249 | ldr r8, =OMAP44XX_SAR_RAM_BASE | |
250 | ldr r9, [r8, #OMAP_TYPE_OFFSET] | |
251 | cmp r9, #0x1 @ Skip if GP device | |
252 | bne skip_ns_smp_enable | |
253 | mrc p15, 0, r0, c0, c0, 5 | |
254 | ands r0, r0, #0x0f | |
255 | beq skip_ns_smp_enable | |
256 | ppa_actrl_retry: | |
257 | mov r0, #OMAP4_PPA_CPU_ACTRL_SMP_INDEX | |
4da597d1 TL |
258 | adr r1, ppa_zero_params_offset |
259 | ldr r3, [r1] | |
260 | add r3, r3, r1 @ Pointer to ppa_zero_params | |
b2b9762f SS |
261 | mov r1, #0x0 @ Process ID |
262 | mov r2, #0x4 @ Flag | |
263 | mov r6, #0xff | |
264 | mov r12, #0x00 @ Secure Service ID | |
265 | DO_SMC | |
266 | cmp r0, #0x0 @ API returns 0 on success. | |
267 | beq enable_smp_bit | |
268 | b ppa_actrl_retry | |
269 | enable_smp_bit: | |
270 | mrc p15, 0, r0, c1, c0, 1 | |
271 | tst r0, #(1 << 6) @ Check SMP bit enabled? | |
272 | orreq r0, r0, #(1 << 6) | |
273 | mcreq p15, 0, r0, c1, c0, 1 | |
274 | isb | |
275 | skip_ns_smp_enable: | |
5e94c6e3 SS |
276 | #ifdef CONFIG_CACHE_L2X0 |
277 | /* | |
278 | * Restore the L2 AUXCTRL and enable the L2 cache. | |
279 | * OMAP4_MON_L2X0_AUXCTRL_INDEX = Program the L2X0 AUXCTRL | |
280 | * OMAP4_MON_L2X0_CTRL_INDEX = Enable the L2 using L2X0 CTRL | |
281 | * register r0 contains value to be programmed. | |
282 | * L2 cache is already invalidate by ROM code as part | |
283 | * of MPUSS OFF wakeup path. | |
284 | */ | |
285 | ldr r2, =OMAP44XX_L2CACHE_BASE | |
286 | ldr r0, [r2, #L2X0_CTRL] | |
287 | and r0, #0x0f | |
288 | cmp r0, #1 | |
289 | beq skip_l2en @ Skip if already enabled | |
290 | ldr r3, =OMAP44XX_SAR_RAM_BASE | |
291 | ldr r1, [r3, #OMAP_TYPE_OFFSET] | |
292 | cmp r1, #0x1 @ Check for HS device | |
293 | bne set_gp_por | |
294 | ldr r0, =OMAP4_PPA_L2_POR_INDEX | |
295 | ldr r1, =OMAP44XX_SAR_RAM_BASE | |
296 | ldr r4, [r1, #L2X0_PREFETCH_CTRL_OFFSET] | |
4da597d1 TL |
297 | adr r1, ppa_por_params_offset |
298 | ldr r3, [r1] | |
299 | add r3, r3, r1 @ Pointer to ppa_por_params | |
5e94c6e3 SS |
300 | str r4, [r3, #0x04] |
301 | mov r1, #0x0 @ Process ID | |
302 | mov r2, #0x4 @ Flag | |
303 | mov r6, #0xff | |
304 | mov r12, #0x00 @ Secure Service ID | |
305 | DO_SMC | |
306 | b set_aux_ctrl | |
307 | set_gp_por: | |
308 | ldr r1, =OMAP44XX_SAR_RAM_BASE | |
309 | ldr r0, [r1, #L2X0_PREFETCH_CTRL_OFFSET] | |
310 | ldr r12, =OMAP4_MON_L2X0_PREFETCH_INDEX @ Setup L2 PREFETCH | |
311 | DO_SMC | |
312 | set_aux_ctrl: | |
313 | ldr r1, =OMAP44XX_SAR_RAM_BASE | |
314 | ldr r0, [r1, #L2X0_AUXCTRL_OFFSET] | |
315 | ldr r12, =OMAP4_MON_L2X0_AUXCTRL_INDEX @ Setup L2 AUXCTRL | |
316 | DO_SMC | |
317 | mov r0, #0x1 | |
318 | ldr r12, =OMAP4_MON_L2X0_CTRL_INDEX @ Enable L2 cache | |
319 | DO_SMC | |
320 | skip_l2en: | |
321 | #endif | |
b2b9762f SS |
322 | |
323 | b cpu_resume @ Jump to generic resume | |
4da597d1 TL |
324 | ppa_por_params_offset: |
325 | .long ppa_por_params - . | |
b2b9762f | 326 | ENDPROC(omap4_cpu_resume) |
b46355a9 NM |
327 | #endif /* CONFIG_ARCH_OMAP4 */ |
328 | ||
329 | #endif /* defined(CONFIG_SMP) && defined(CONFIG_PM) */ | |
b2b9762f SS |
330 | |
331 | ENTRY(omap_do_wfi) | |
332 | stmfd sp!, {lr} | |
3fa60975 | 333 | #ifdef CONFIG_OMAP_INTERCONNECT_BARRIER |
137d105d | 334 | /* Drain interconnect write buffers. */ |
3fa60975 RK |
335 | bl omap_interconnect_sync |
336 | #endif | |
b2b9762f SS |
337 | |
338 | /* | |
339 | * Execute an ISB instruction to ensure that all of the | |
340 | * CP15 register changes have been committed. | |
341 | */ | |
342 | isb | |
343 | ||
344 | /* | |
345 | * Execute a barrier instruction to ensure that all cache, | |
346 | * TLB and branch predictor maintenance operations issued | |
347 | * by any CPU in the cluster have completed. | |
348 | */ | |
349 | dsb | |
350 | dmb | |
351 | ||
352 | /* | |
353 | * Execute a WFI instruction and wait until the | |
354 | * STANDBYWFI output is asserted to indicate that the | |
355 | * CPU is in idle and low power state. CPU can specualatively | |
356 | * prefetch the instructions so add NOPs after WFI. Sixteen | |
357 | * NOPs as per Cortex-A9 pipeline. | |
358 | */ | |
359 | wfi @ Wait For Interrupt | |
360 | nop | |
361 | nop | |
362 | nop | |
363 | nop | |
364 | nop | |
365 | nop | |
366 | nop | |
367 | nop | |
368 | nop | |
369 | nop | |
370 | nop | |
371 | nop | |
372 | nop | |
373 | nop | |
374 | nop | |
375 | nop | |
376 | ||
377 | ldmfd sp!, {pc} | |
4da597d1 TL |
378 | ppa_zero_params_offset: |
379 | .long ppa_zero_params - . | |
b2b9762f | 380 | ENDPROC(omap_do_wfi) |
4da597d1 TL |
381 | |
382 | .data | |
1abd3502 | 383 | .align 2 |
4da597d1 TL |
384 | ppa_zero_params: |
385 | .word 0 | |
386 | ||
387 | ppa_por_params: | |
388 | .word 1, 0 |