Commit | Line | Data |
---|---|---|
eba2645a SS |
1 | /* |
2 | * board-overo.c (Gumstix Overo) | |
3 | * | |
4 | * Initial code: Steve Sakoman <steve@sakoman.com> | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or | |
7 | * modify it under the terms of the GNU General Public License | |
8 | * version 2 as published by the Free Software Foundation. | |
9 | * | |
10 | * This program is distributed in the hope that it will be useful, but | |
11 | * WITHOUT ANY WARRANTY; without even the implied warranty of | |
12 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
13 | * General Public License for more details. | |
14 | * | |
15 | * You should have received a copy of the GNU General Public License | |
16 | * along with this program; if not, write to the Free Software | |
17 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | |
18 | * 02110-1301 USA | |
19 | * | |
20 | */ | |
21 | ||
22 | #include <linux/clk.h> | |
23 | #include <linux/delay.h> | |
24 | #include <linux/err.h> | |
25 | #include <linux/init.h> | |
26 | #include <linux/io.h> | |
f9fa1bb9 | 27 | #include <linux/gpio.h> |
eba2645a SS |
28 | #include <linux/kernel.h> |
29 | #include <linux/platform_device.h> | |
b07682b6 | 30 | #include <linux/i2c/twl.h> |
bb3b9d8e | 31 | #include <linux/regulator/machine.h> |
ca0a6a64 | 32 | #include <linux/regulator/fixed.h> |
7b12d7b6 | 33 | #include <linux/spi/spi.h> |
eba2645a SS |
34 | |
35 | #include <linux/mtd/mtd.h> | |
36 | #include <linux/mtd/nand.h> | |
37 | #include <linux/mtd/partitions.h> | |
3a63833e | 38 | #include <linux/mmc/host.h> |
eba2645a SS |
39 | |
40 | #include <asm/mach-types.h> | |
41 | #include <asm/mach/arch.h> | |
42 | #include <asm/mach/flash.h> | |
43 | #include <asm/mach/map.h> | |
44 | ||
ce491cf8 TL |
45 | #include <plat/board.h> |
46 | #include <plat/common.h> | |
a0b38cc4 | 47 | #include <video/omapdss.h> |
f8ae2f08 | 48 | #include <video/omap-panel-generic-dpi.h> |
1d7a8654 | 49 | #include <video/omap-panel-dvi.h> |
ce491cf8 | 50 | #include <plat/gpmc.h> |
eba2645a | 51 | #include <mach/hardware.h> |
ce491cf8 | 52 | #include <plat/nand.h> |
7b12d7b6 SS |
53 | #include <plat/mcspi.h> |
54 | #include <plat/mux.h> | |
ce491cf8 | 55 | #include <plat/usb.h> |
eba2645a | 56 | |
ca5742bd | 57 | #include "mux.h" |
2e12bd7e | 58 | #include "sdram-micron-mt46h32m32lf-6.h" |
d02a900b | 59 | #include "hsmmc.h" |
96974a24 | 60 | #include "common-board-devices.h" |
90c62bf0 | 61 | |
0d4d9ab0 TL |
62 | #define OVERO_GPIO_BT_XGATE 15 |
63 | #define OVERO_GPIO_W2W_NRESET 16 | |
6fd210a9 | 64 | #define OVERO_GPIO_PENDOWN 114 |
0d4d9ab0 TL |
65 | #define OVERO_GPIO_BT_NRESET 164 |
66 | #define OVERO_GPIO_USBH_CPEN 168 | |
67 | #define OVERO_GPIO_USBH_NRESET 183 | |
68 | ||
172ef275 SS |
69 | #define OVERO_SMSC911X_CS 5 |
70 | #define OVERO_SMSC911X_GPIO 176 | |
5c9a29ed SS |
71 | #define OVERO_SMSC911X2_CS 4 |
72 | #define OVERO_SMSC911X2_GPIO 65 | |
172ef275 | 73 | |
c6a81316 SS |
74 | #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ |
75 | defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) | |
76 | ||
ca0a6a64 | 77 | /* fixed regulator for ads7846 */ |
786b01a8 OD |
78 | static struct regulator_consumer_supply ads7846_supply[] = { |
79 | REGULATOR_SUPPLY("vcc", "spi1.0"), | |
80 | }; | |
ca0a6a64 SS |
81 | |
82 | static struct regulator_init_data vads7846_regulator = { | |
83 | .constraints = { | |
84 | .valid_ops_mask = REGULATOR_CHANGE_STATUS, | |
85 | }, | |
786b01a8 OD |
86 | .num_consumer_supplies = ARRAY_SIZE(ads7846_supply), |
87 | .consumer_supplies = ads7846_supply, | |
ca0a6a64 SS |
88 | }; |
89 | ||
90 | static struct fixed_voltage_config vads7846 = { | |
91 | .supply_name = "vads7846", | |
92 | .microvolts = 3300000, /* 3.3V */ | |
93 | .gpio = -EINVAL, | |
94 | .startup_delay = 0, | |
95 | .init_data = &vads7846_regulator, | |
96 | }; | |
97 | ||
98 | static struct platform_device vads7846_device = { | |
99 | .name = "reg-fixed-voltage", | |
100 | .id = 1, | |
101 | .dev = { | |
102 | .platform_data = &vads7846, | |
103 | }, | |
c6a81316 SS |
104 | }; |
105 | ||
106 | static void __init overo_ads7846_init(void) | |
107 | { | |
96974a24 | 108 | omap_ads7846_init(1, OVERO_GPIO_PENDOWN, 0, NULL); |
ca0a6a64 | 109 | platform_device_register(&vads7846_device); |
c6a81316 SS |
110 | } |
111 | ||
112 | #else | |
113 | static inline void __init overo_ads7846_init(void) { return; } | |
114 | #endif | |
115 | ||
172ef275 SS |
116 | #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) |
117 | ||
118 | #include <linux/smsc911x.h> | |
21b42731 | 119 | #include <plat/gpmc-smsc911x.h> |
172ef275 | 120 | |
21b42731 | 121 | static struct omap_smsc911x_platform_data smsc911x_cfg = { |
5c9a29ed | 122 | .id = 0, |
21b42731 MR |
123 | .cs = OVERO_SMSC911X_CS, |
124 | .gpio_irq = OVERO_SMSC911X_GPIO, | |
125 | .gpio_reset = -EINVAL, | |
126 | .flags = SMSC911X_USE_32BIT, | |
172ef275 SS |
127 | }; |
128 | ||
21b42731 | 129 | static struct omap_smsc911x_platform_data smsc911x2_cfg = { |
a5ba7ae2 | 130 | .id = 1, |
21b42731 MR |
131 | .cs = OVERO_SMSC911X2_CS, |
132 | .gpio_irq = OVERO_SMSC911X2_GPIO, | |
133 | .gpio_reset = -EINVAL, | |
134 | .flags = SMSC911X_USE_32BIT, | |
a5ba7ae2 SS |
135 | }; |
136 | ||
21b42731 | 137 | static void __init overo_init_smsc911x(void) |
172ef275 | 138 | { |
21b42731 MR |
139 | gpmc_smsc911x_init(&smsc911x_cfg); |
140 | gpmc_smsc911x_init(&smsc911x2_cfg); | |
172ef275 SS |
141 | } |
142 | ||
143 | #else | |
144 | static inline void __init overo_init_smsc911x(void) { return; } | |
145 | #endif | |
146 | ||
7b12d7b6 SS |
147 | /* DSS */ |
148 | static int lcd_enabled; | |
149 | static int dvi_enabled; | |
150 | ||
151 | #define OVERO_GPIO_LCD_EN 144 | |
152 | #define OVERO_GPIO_LCD_BL 145 | |
153 | ||
bc593f5d IG |
154 | static struct gpio overo_dss_gpios[] __initdata = { |
155 | { OVERO_GPIO_LCD_EN, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_EN" }, | |
156 | { OVERO_GPIO_LCD_BL, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_BL" }, | |
157 | }; | |
158 | ||
7b12d7b6 SS |
159 | static void __init overo_display_init(void) |
160 | { | |
bc593f5d IG |
161 | if (gpio_request_array(overo_dss_gpios, ARRAY_SIZE(overo_dss_gpios))) { |
162 | printk(KERN_ERR "could not obtain DSS control GPIOs\n"); | |
163 | return; | |
164 | } | |
7b12d7b6 | 165 | |
bc593f5d IG |
166 | gpio_export(OVERO_GPIO_LCD_EN, 0); |
167 | gpio_export(OVERO_GPIO_LCD_BL, 0); | |
7b12d7b6 SS |
168 | } |
169 | ||
170 | static int overo_panel_enable_dvi(struct omap_dss_device *dssdev) | |
171 | { | |
172 | if (lcd_enabled) { | |
173 | printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); | |
174 | return -EINVAL; | |
175 | } | |
176 | dvi_enabled = 1; | |
177 | ||
178 | return 0; | |
179 | } | |
180 | ||
181 | static void overo_panel_disable_dvi(struct omap_dss_device *dssdev) | |
182 | { | |
183 | dvi_enabled = 0; | |
184 | } | |
185 | ||
1d7a8654 | 186 | static struct panel_dvi_platform_data dvi_panel = { |
7b12d7b6 SS |
187 | .platform_enable = overo_panel_enable_dvi, |
188 | .platform_disable = overo_panel_disable_dvi, | |
189 | }; | |
190 | ||
191 | static struct omap_dss_device overo_dvi_device = { | |
192 | .name = "dvi", | |
193 | .type = OMAP_DISPLAY_TYPE_DPI, | |
1d7a8654 | 194 | .driver_name = "dvi", |
7b12d7b6 SS |
195 | .data = &dvi_panel, |
196 | .phy.dpi.data_lines = 24, | |
197 | }; | |
198 | ||
199 | static struct omap_dss_device overo_tv_device = { | |
200 | .name = "tv", | |
201 | .driver_name = "venc", | |
202 | .type = OMAP_DISPLAY_TYPE_VENC, | |
203 | .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, | |
204 | }; | |
205 | ||
206 | static int overo_panel_enable_lcd(struct omap_dss_device *dssdev) | |
207 | { | |
208 | if (dvi_enabled) { | |
209 | printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); | |
210 | return -EINVAL; | |
211 | } | |
212 | ||
213 | gpio_set_value(OVERO_GPIO_LCD_EN, 1); | |
214 | gpio_set_value(OVERO_GPIO_LCD_BL, 1); | |
215 | lcd_enabled = 1; | |
216 | return 0; | |
217 | } | |
218 | ||
219 | static void overo_panel_disable_lcd(struct omap_dss_device *dssdev) | |
220 | { | |
221 | gpio_set_value(OVERO_GPIO_LCD_EN, 0); | |
222 | gpio_set_value(OVERO_GPIO_LCD_BL, 0); | |
223 | lcd_enabled = 0; | |
224 | } | |
225 | ||
226 | static struct panel_generic_dpi_data lcd43_panel = { | |
227 | .name = "samsung_lte430wq_f0c", | |
228 | .platform_enable = overo_panel_enable_lcd, | |
229 | .platform_disable = overo_panel_disable_lcd, | |
230 | }; | |
231 | ||
232 | static struct omap_dss_device overo_lcd43_device = { | |
233 | .name = "lcd43", | |
234 | .type = OMAP_DISPLAY_TYPE_DPI, | |
235 | .driver_name = "generic_dpi_panel", | |
236 | .data = &lcd43_panel, | |
237 | .phy.dpi.data_lines = 24, | |
238 | }; | |
239 | ||
240 | #if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ | |
241 | defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) | |
242 | static struct omap_dss_device overo_lcd35_device = { | |
243 | .type = OMAP_DISPLAY_TYPE_DPI, | |
244 | .name = "lcd35", | |
245 | .driver_name = "lgphilips_lb035q02_panel", | |
246 | .phy.dpi.data_lines = 24, | |
247 | .platform_enable = overo_panel_enable_lcd, | |
248 | .platform_disable = overo_panel_disable_lcd, | |
249 | }; | |
250 | #endif | |
251 | ||
252 | static struct omap_dss_device *overo_dss_devices[] = { | |
253 | &overo_dvi_device, | |
254 | &overo_tv_device, | |
255 | #if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ | |
256 | defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) | |
257 | &overo_lcd35_device, | |
258 | #endif | |
259 | &overo_lcd43_device, | |
260 | }; | |
261 | ||
262 | static struct omap_dss_board_info overo_dss_data = { | |
263 | .num_devices = ARRAY_SIZE(overo_dss_devices), | |
264 | .devices = overo_dss_devices, | |
265 | .default_device = &overo_dvi_device, | |
266 | }; | |
267 | ||
eba2645a SS |
268 | static struct mtd_partition overo_nand_partitions[] = { |
269 | { | |
270 | .name = "xloader", | |
271 | .offset = 0, /* Offset = 0x00000 */ | |
272 | .size = 4 * NAND_BLOCK_SIZE, | |
273 | .mask_flags = MTD_WRITEABLE | |
274 | }, | |
275 | { | |
276 | .name = "uboot", | |
277 | .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ | |
278 | .size = 14 * NAND_BLOCK_SIZE, | |
279 | }, | |
280 | { | |
281 | .name = "uboot environment", | |
282 | .offset = MTDPART_OFS_APPEND, /* Offset = 0x240000 */ | |
283 | .size = 2 * NAND_BLOCK_SIZE, | |
284 | }, | |
285 | { | |
286 | .name = "linux", | |
287 | .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ | |
288 | .size = 32 * NAND_BLOCK_SIZE, | |
289 | }, | |
290 | { | |
291 | .name = "rootfs", | |
292 | .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ | |
293 | .size = MTDPART_SIZ_FULL, | |
294 | }, | |
295 | }; | |
296 | ||
68ff0423 | 297 | static struct omap2_hsmmc_info mmc[] = { |
bb3b9d8e DB |
298 | { |
299 | .mmc = 1, | |
3a63833e | 300 | .caps = MMC_CAP_4_BIT_DATA, |
bb3b9d8e DB |
301 | .gpio_cd = -EINVAL, |
302 | .gpio_wp = -EINVAL, | |
303 | }, | |
304 | { | |
305 | .mmc = 2, | |
3a63833e | 306 | .caps = MMC_CAP_4_BIT_DATA, |
bb3b9d8e DB |
307 | .gpio_cd = -EINVAL, |
308 | .gpio_wp = -EINVAL, | |
309 | .transceiver = true, | |
310 | .ocr_mask = 0x00100000, /* 3.3V */ | |
311 | }, | |
312 | {} /* Terminator */ | |
313 | }; | |
314 | ||
786b01a8 OD |
315 | static struct regulator_consumer_supply overo_vmmc1_supply[] = { |
316 | REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), | |
bb3b9d8e DB |
317 | }; |
318 | ||
7c94f68d SS |
319 | #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) |
320 | #include <linux/leds.h> | |
321 | ||
322 | static struct gpio_led gpio_leds[] = { | |
323 | { | |
324 | .name = "overo:red:gpio21", | |
325 | .default_trigger = "heartbeat", | |
326 | .gpio = 21, | |
327 | .active_low = true, | |
328 | }, | |
329 | { | |
330 | .name = "overo:blue:gpio22", | |
331 | .default_trigger = "none", | |
332 | .gpio = 22, | |
333 | .active_low = true, | |
334 | }, | |
335 | { | |
336 | .name = "overo:blue:COM", | |
337 | .default_trigger = "mmc0", | |
338 | .gpio = -EINVAL, /* gets replaced */ | |
339 | .active_low = true, | |
340 | }, | |
341 | }; | |
342 | ||
343 | static struct gpio_led_platform_data gpio_leds_pdata = { | |
344 | .leds = gpio_leds, | |
345 | .num_leds = ARRAY_SIZE(gpio_leds), | |
346 | }; | |
347 | ||
348 | static struct platform_device gpio_leds_device = { | |
349 | .name = "leds-gpio", | |
350 | .id = -1, | |
351 | .dev = { | |
352 | .platform_data = &gpio_leds_pdata, | |
353 | }, | |
354 | }; | |
355 | ||
356 | static void __init overo_init_led(void) | |
357 | { | |
358 | platform_device_register(&gpio_leds_device); | |
359 | } | |
360 | ||
361 | #else | |
362 | static inline void __init overo_init_led(void) { return; } | |
363 | #endif | |
364 | ||
cce18a94 SS |
365 | #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) |
366 | #include <linux/input.h> | |
367 | #include <linux/gpio_keys.h> | |
368 | ||
369 | static struct gpio_keys_button gpio_buttons[] = { | |
370 | { | |
371 | .code = BTN_0, | |
372 | .gpio = 23, | |
373 | .desc = "button0", | |
374 | .wakeup = 1, | |
375 | }, | |
376 | { | |
377 | .code = BTN_1, | |
378 | .gpio = 14, | |
379 | .desc = "button1", | |
380 | .wakeup = 1, | |
381 | }, | |
382 | }; | |
383 | ||
384 | static struct gpio_keys_platform_data gpio_keys_pdata = { | |
385 | .buttons = gpio_buttons, | |
386 | .nbuttons = ARRAY_SIZE(gpio_buttons), | |
387 | }; | |
388 | ||
389 | static struct platform_device gpio_keys_device = { | |
390 | .name = "gpio-keys", | |
391 | .id = -1, | |
392 | .dev = { | |
393 | .platform_data = &gpio_keys_pdata, | |
394 | }, | |
395 | }; | |
396 | ||
397 | static void __init overo_init_keys(void) | |
398 | { | |
399 | platform_device_register(&gpio_keys_device); | |
400 | } | |
401 | ||
402 | #else | |
403 | static inline void __init overo_init_keys(void) { return; } | |
404 | #endif | |
405 | ||
bb3b9d8e DB |
406 | static int overo_twl_gpio_setup(struct device *dev, |
407 | unsigned gpio, unsigned ngpio) | |
408 | { | |
68ff0423 | 409 | omap2_hsmmc_init(mmc); |
bb3b9d8e | 410 | |
7c94f68d SS |
411 | #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) |
412 | /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ | |
413 | gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; | |
414 | #endif | |
415 | ||
bb3b9d8e DB |
416 | return 0; |
417 | } | |
418 | ||
90c62bf0 TL |
419 | static struct twl4030_gpio_platform_data overo_gpio_data = { |
420 | .gpio_base = OMAP_MAX_GPIO_LINES, | |
421 | .irq_base = TWL4030_GPIO_IRQ_BASE, | |
422 | .irq_end = TWL4030_GPIO_IRQ_END, | |
7c94f68d | 423 | .use_leds = true, |
bb3b9d8e DB |
424 | .setup = overo_twl_gpio_setup, |
425 | }; | |
426 | ||
bb3b9d8e DB |
427 | static struct regulator_init_data overo_vmmc1 = { |
428 | .constraints = { | |
429 | .min_uV = 1850000, | |
430 | .max_uV = 3150000, | |
431 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
432 | | REGULATOR_MODE_STANDBY, | |
433 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
434 | | REGULATOR_CHANGE_MODE | |
435 | | REGULATOR_CHANGE_STATUS, | |
436 | }, | |
786b01a8 OD |
437 | .num_consumer_supplies = ARRAY_SIZE(overo_vmmc1_supply), |
438 | .consumer_supplies = overo_vmmc1_supply, | |
90c62bf0 TL |
439 | }; |
440 | ||
441 | static struct twl4030_platform_data overo_twldata = { | |
90c62bf0 | 442 | .gpio = &overo_gpio_data, |
bb3b9d8e | 443 | .vmmc1 = &overo_vmmc1, |
90c62bf0 TL |
444 | }; |
445 | ||
eba2645a SS |
446 | static int __init overo_i2c_init(void) |
447 | { | |
827ed9ae | 448 | omap3_pmic_get_config(&overo_twldata, |
b252b0ef PU |
449 | TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, |
450 | TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); | |
451 | ||
452 | overo_twldata.vpll2->constraints.name = "VDVI"; | |
453 | ||
fbd8071c | 454 | omap3_pmic_init("tps65950", &overo_twldata); |
eba2645a SS |
455 | /* i2c2 pins are used for gpio */ |
456 | omap_register_i2c_bus(3, 400, NULL, 0); | |
457 | return 0; | |
458 | } | |
459 | ||
7b12d7b6 | 460 | static struct spi_board_info overo_spi_board_info[] __initdata = { |
7b12d7b6 SS |
461 | #if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ |
462 | defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) | |
463 | { | |
464 | .modalias = "lgphilips_lb035q02_panel-spi", | |
465 | .bus_num = 1, | |
466 | .chip_select = 1, | |
467 | .max_speed_hz = 500000, | |
468 | .mode = SPI_MODE_3, | |
469 | }, | |
470 | #endif | |
eba2645a SS |
471 | }; |
472 | ||
7b12d7b6 SS |
473 | static int __init overo_spi_init(void) |
474 | { | |
475 | overo_ads7846_init(); | |
476 | spi_register_board_info(overo_spi_board_info, | |
477 | ARRAY_SIZE(overo_spi_board_info)); | |
478 | return 0; | |
479 | } | |
eba2645a | 480 | |
3dc3bad6 | 481 | static void __init overo_init_early(void) |
b3c6df3a | 482 | { |
4805734b PW |
483 | omap2_init_common_infrastructure(); |
484 | omap2_init_common_devices(mt46h32m32lf6_sdrc_params, | |
485 | mt46h32m32lf6_sdrc_params); | |
b3c6df3a PW |
486 | } |
487 | ||
181b250c KM |
488 | static const struct usbhs_omap_board_data usbhs_bdata __initconst = { |
489 | .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, | |
490 | .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, | |
491 | .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, | |
58a5491c FB |
492 | .phy_reset = true, |
493 | .reset_gpio_port[0] = -EINVAL, | |
494 | .reset_gpio_port[1] = OVERO_GPIO_USBH_NRESET, | |
495 | .reset_gpio_port[2] = -EINVAL | |
496 | }; | |
497 | ||
ca5742bd TL |
498 | #ifdef CONFIG_OMAP_MUX |
499 | static struct omap_board_mux board_mux[] __initdata = { | |
500 | { .reg_offset = OMAP_MUX_TERMINATOR }, | |
501 | }; | |
ca5742bd | 502 | #endif |
58a5491c | 503 | |
bc593f5d IG |
504 | static struct gpio overo_bt_gpios[] __initdata = { |
505 | { OVERO_GPIO_BT_XGATE, GPIOF_OUT_INIT_LOW, "lcd enable" }, | |
506 | { OVERO_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH, "lcd bl enable" }, | |
884b8369 MM |
507 | }; |
508 | ||
eba2645a SS |
509 | static void __init overo_init(void) |
510 | { | |
bc593f5d IG |
511 | int ret; |
512 | ||
ca5742bd | 513 | omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); |
eba2645a | 514 | overo_i2c_init(); |
7b12d7b6 | 515 | omap_display_init(&overo_dss_data); |
eba2645a | 516 | omap_serial_init(); |
9a3f39ff MR |
517 | omap_nand_flash_init(0, overo_nand_partitions, |
518 | ARRAY_SIZE(overo_nand_partitions)); | |
9e18630b | 519 | usb_musb_init(NULL); |
9e64bb1e | 520 | usbhs_init(&usbhs_bdata); |
7b12d7b6 | 521 | overo_spi_init(); |
172ef275 | 522 | overo_init_smsc911x(); |
7b12d7b6 | 523 | overo_display_init(); |
7c94f68d | 524 | overo_init_led(); |
cce18a94 | 525 | overo_init_keys(); |
eba2645a | 526 | |
9fb97412 | 527 | /* Ensure SDRC pins are mux'd for self-refresh */ |
4896e394 TL |
528 | omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); |
529 | omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); | |
9fb97412 | 530 | |
bc593f5d IG |
531 | ret = gpio_request_one(OVERO_GPIO_W2W_NRESET, GPIOF_OUT_INIT_HIGH, |
532 | "OVERO_GPIO_W2W_NRESET"); | |
533 | if (ret == 0) { | |
eba2645a SS |
534 | gpio_export(OVERO_GPIO_W2W_NRESET, 0); |
535 | gpio_set_value(OVERO_GPIO_W2W_NRESET, 0); | |
536 | udelay(10); | |
537 | gpio_set_value(OVERO_GPIO_W2W_NRESET, 1); | |
538 | } else { | |
539 | printk(KERN_ERR "could not obtain gpio for " | |
540 | "OVERO_GPIO_W2W_NRESET\n"); | |
541 | } | |
542 | ||
bc593f5d IG |
543 | ret = gpio_request_array(overo_bt_gpios, ARRAY_SIZE(overo_bt_gpios)); |
544 | if (ret) { | |
545 | pr_err("%s: could not obtain BT gpios\n", __func__); | |
546 | } else { | |
eba2645a | 547 | gpio_export(OVERO_GPIO_BT_XGATE, 0); |
eba2645a SS |
548 | gpio_export(OVERO_GPIO_BT_NRESET, 0); |
549 | gpio_set_value(OVERO_GPIO_BT_NRESET, 0); | |
550 | mdelay(6); | |
551 | gpio_set_value(OVERO_GPIO_BT_NRESET, 1); | |
eba2645a SS |
552 | } |
553 | ||
bc593f5d IG |
554 | ret = gpio_request_one(OVERO_GPIO_USBH_CPEN, GPIOF_OUT_INIT_HIGH, |
555 | "OVERO_GPIO_USBH_CPEN"); | |
556 | if (ret == 0) | |
eba2645a SS |
557 | gpio_export(OVERO_GPIO_USBH_CPEN, 0); |
558 | else | |
559 | printk(KERN_ERR "could not obtain gpio for " | |
560 | "OVERO_GPIO_USBH_CPEN\n"); | |
eba2645a SS |
561 | } |
562 | ||
eba2645a | 563 | MACHINE_START(OVERO, "Gumstix Overo") |
eba2645a | 564 | .boot_params = 0x80000100, |
71ee7dad | 565 | .reserve = omap_reserve, |
3dc3bad6 RKAL |
566 | .map_io = omap3_map_io, |
567 | .init_early = overo_init_early, | |
741e3a89 | 568 | .init_irq = omap3_init_irq, |
eba2645a | 569 | .init_machine = overo_init, |
e74984e4 | 570 | .timer = &omap3_timer, |
eba2645a | 571 | MACHINE_END |