[linux-2.6-block.git] / arch / arm / mach-omap2 / Makefile

#
# Makefile for the linux kernel.
#

# Common support
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o \
	 common.o gpio.o dma.o wd_timer.o

omap-2-3-common				= irq.o sdrc.o
hwmod-common				= omap_hwmod.o \
					  omap_hwmod_common_data.o
clock-common				= clock.o clock_common_data.o \
					  clkt_dpll.o clkt_clksel.o

obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common)
obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common)

obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o

# SMP support ONLY available for OMAP4
obj-$(CONFIG_SMP)			+= omap-smp.o omap-headsmp.o
obj-$(CONFIG_LOCAL_TIMERS)		+= timer-mpu.o
obj-$(CONFIG_HOTPLUG_CPU)		+= omap-hotplug.o
obj-$(CONFIG_ARCH_OMAP4)		+= omap44xx-smc.o omap4-common.o

plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_omap-headsmp.o			:=-Wa,-march=armv7-a$(plus_sec)
AFLAGS_omap44xx-smc.o			:=-Wa,-march=armv7-a$(plus_sec)

# Functions loaded to SRAM
obj-$(CONFIG_ARCH_OMAP2420)		+= sram242x.o
obj-$(CONFIG_ARCH_OMAP2430)		+= sram243x.o
obj-$(CONFIG_ARCH_OMAP3)		+= sram34xx.o

AFLAGS_sram242x.o			:=-Wa,-march=armv6
AFLAGS_sram243x.o			:=-Wa,-march=armv6
AFLAGS_sram34xx.o			:=-Wa,-march=armv7-a

# Pin multiplexing
obj-$(CONFIG_ARCH_OMAP2420)		+= mux2420.o
obj-$(CONFIG_ARCH_OMAP2430)		+= mux2430.o
obj-$(CONFIG_ARCH_OMAP3)		+= mux34xx.o
obj-$(CONFIG_ARCH_OMAP4)		+= mux44xx.o

# SMS/SDRC
obj-$(CONFIG_ARCH_OMAP2)		+= sdrc2xxx.o
# obj-$(CONFIG_ARCH_OMAP3)		+= sdrc3xxx.o

# OPP table initialization
ifeq ($(CONFIG_PM_OPP),y)
obj-y					+= opp.o
obj-$(CONFIG_ARCH_OMAP3)		+= opp3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4)		+= opp4xxx_data.o
endif

# Power Management
ifeq ($(CONFIG_PM),y)
obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o pm_bus.o voltage.o
obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o voltage.o \
					   cpuidle34xx.o pm_bus.o
obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o pm_bus.o
obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
obj-$(CONFIG_OMAP_SMARTREFLEX)          += sr_device.o smartreflex.o

AFLAGS_sleep24xx.o			:=-Wa,-march=armv6
AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a

ifeq ($(CONFIG_PM_VERBOSE),y)
CFLAGS_pm_bus.o				+= -DDEBUG
endif

endif

# PRCM
obj-$(CONFIG_ARCH_OMAP2)		+= prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
obj-$(CONFIG_ARCH_OMAP3)		+= prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
# XXX The presence of cm2xxx_3xxx.o on the line below is temporary and
# will be removed once the OMAP4 part of the codebase is converted to
# use OMAP4-specific PRCM functions.
obj-$(CONFIG_ARCH_OMAP4)		+= prcm.o cm2xxx_3xxx.o cminst44xx.o \
					   cm44xx.o prcm_mpu44xx.o \
					   prminst44xx.o

# OMAP powerdomain framework
powerdomain-common			+= powerdomain.o powerdomain-common.o
obj-$(CONFIG_ARCH_OMAP2)		+= $(powerdomain-common) \
					   powerdomain2xxx_3xxx.o \
					   powerdomains2xxx_data.o \
					   powerdomains2xxx_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP3)		+= $(powerdomain-common) \
					   powerdomain2xxx_3xxx.o \
					   powerdomains3xxx_data.o \
					   powerdomains2xxx_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4)		+= $(powerdomain-common) \
					   powerdomain44xx.o \
					   powerdomains44xx_data.o

# PRCM clockdomain control
obj-$(CONFIG_ARCH_OMAP2)		+= clockdomain.o \
					   clockdomains2xxx_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP3)		+= clockdomain.o \
					   clockdomains2xxx_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4)		+= clockdomain.o \
					   clockdomains44xx_data.o
# Clock framework
obj-$(CONFIG_ARCH_OMAP2)		+= $(clock-common) clock2xxx.o \
					   clkt2xxx_sys.o \
					   clkt2xxx_dpllcore.o \
					   clkt2xxx_virt_prcm_set.o \
					   clkt2xxx_apll.o clkt2xxx_osc.o
obj-$(CONFIG_ARCH_OMAP2420)		+= clock2420_data.o
obj-$(CONFIG_ARCH_OMAP2430)		+= clock2430.o clock2430_data.o
obj-$(CONFIG_ARCH_OMAP3)		+= $(clock-common) clock3xxx.o \
					   clock34xx.o clkt34xx_dpll3m2.o \
					   clock3517.o clock36xx.o \
					   dpll3xxx.o clock3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common) clock44xx_data.o \
					   dpll3xxx.o

# OMAP2 clock rate set data (old "OPP" data)
obj-$(CONFIG_ARCH_OMAP2420)		+= opp2420_data.o
obj-$(CONFIG_ARCH_OMAP2430)		+= opp2430_data.o

# hwmod data
obj-$(CONFIG_ARCH_OMAP2420)		+= omap_hwmod_2420_data.o
obj-$(CONFIG_ARCH_OMAP2430)		+= omap_hwmod_2430_data.o
obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4)		+= omap_hwmod_44xx_data.o

# EMU peripherals
obj-$(CONFIG_OMAP3_EMU)			+= emu.o

obj-$(CONFIG_OMAP_MBOX_FWK)		+= mailbox_mach.o
mailbox_mach-objs			:= mailbox.o

obj-$(CONFIG_OMAP_IOMMU)		+= iommu2.o

iommu-$(CONFIG_OMAP_IOMMU)		:= omap-iommu.o
obj-y					+= $(iommu-m) $(iommu-y)

i2c-omap-$(CONFIG_I2C_OMAP)		:= i2c.o
obj-y					+= $(i2c-omap-m) $(i2c-omap-y)

ifneq ($(CONFIG_TIDSPBRIDGE),)
obj-y					+= dsp.o
endif

# Specific board support
obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
obj-$(CONFIG_MACH_OMAP_2430SDP)		+= board-2430sdp.o \
					   hsmmc.o
obj-$(CONFIG_MACH_OMAP_APOLLON)		+= board-apollon.o
obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o \
					   hsmmc.o
obj-$(CONFIG_MACH_DEVKIT8000)     	+= board-devkit8000.o \
                                           hsmmc.o
obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o \
					   board-flash.o \
					   hsmmc.o
obj-$(CONFIG_MACH_OMAP3530_LV_SOM)      += board-omap3logic.o \
					   hsmmc.o
obj-$(CONFIG_MACH_OMAP3_TORPEDO)        += board-omap3logic.o \
					   hsmmc.o
obj-$(CONFIG_MACH_OVERO)		+= board-overo.o \
					   hsmmc.o
obj-$(CONFIG_MACH_OMAP3EVM)		+= board-omap3evm.o \
					   hsmmc.o
obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o \
					   hsmmc.o
obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
					   hsmmc.o \
					   board-flash.o
obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
obj-$(CONFIG_MACH_NOKIA_RM680)		+= board-rm680.o \
					   sdram-nokia.o \
					   hsmmc.o
obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
					   sdram-nokia.o \
					   board-rx51-peripherals.o \
					   board-rx51-video.o \
					   hsmmc.o
obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom.o \
					   board-zoom-peripherals.o \
					   board-flash.o \
					   hsmmc.o \
					   board-zoom-debugboard.o
obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom.o \
					   board-zoom-peripherals.o \
					   board-flash.o \
					   hsmmc.o \
					   board-zoom-debugboard.o
obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-3630sdp.o \
					   board-zoom-peripherals.o \
					   board-flash.o \
					   hsmmc.o
obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o \
					   hsmmc.o
obj-$(CONFIG_MACH_CM_T3517)		+= board-cm-t3517.o
obj-$(CONFIG_MACH_IGEP0020)		+= board-igep0020.o \
					   hsmmc.o
obj-$(CONFIG_MACH_IGEP0030)		+= board-igep0030.o \
					   hsmmc.o
obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK)	+= board-omap3touchbook.o \
					   hsmmc.o
obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o \
					   hsmmc.o
obj-$(CONFIG_MACH_OMAP4_PANDA)		+= board-omap4panda.o \
					   hsmmc.o

obj-$(CONFIG_MACH_OMAP3517EVM)		+= board-am3517evm.o

obj-$(CONFIG_MACH_CRANEBOARD)		+= board-am3517crane.o

obj-$(CONFIG_MACH_SBC3530)		+= board-omap3stalker.o \
					   hsmmc.o
# Platform specific device init code
usbfs-$(CONFIG_ARCH_OMAP_OTG)		:= usb-fs.o
obj-y					+= $(usbfs-m) $(usbfs-y)
obj-y					+= usb-musb.o
obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o
obj-y					+= usb-ehci.o

onenand-$(CONFIG_MTD_ONENAND_OMAP2)	:= gpmc-onenand.o
obj-y					+= $(onenand-m) $(onenand-y)

nand-$(CONFIG_MTD_NAND_OMAP2)		:= gpmc-nand.o
obj-y					+= $(nand-m) $(nand-y)

smc91x-$(CONFIG_SMC91X)			:= gpmc-smc91x.o
obj-y					+= $(smc91x-m) $(smc91x-y)

smsc911x-$(CONFIG_SMSC911X)		:= gpmc-smsc911x.o
obj-y					+= $(smsc911x-m) $(smsc911x-y)
Commit	Line	Data
1dbae815 TL	1	#
	2	# Makefile for the linux kernel.
	3	#
	4
	5	# Common support
aa218daf	6	obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o \
81fbc5ef	7	common.o gpio.o dma.o wd_timer.o
d7607663	8
59fb659b	9	omap-2-3-common = irq.o sdrc.o
43b40992	10	hwmod-common = omap_hwmod.o \
358f0e63	11	omap_hwmod_common_data.o
0b96af68	12	clock-common = clock.o clock_common_data.o \
dc0b3a70	13	clkt_dpll.o clkt_clksel.o
657ebfad	14
74bea6b9 RN	15	obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
	16	obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common)
	17	obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common)
1dbae815	18
78673bc8 EV	19	obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
78673bc8 EV	20
934f8be7 SS	21	# SMP support ONLY available for OMAP4
	22	obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
	23	obj-$(CONFIG_LOCAL_TIMERS) += timer-mpu.o
7d35b8d0	24	obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o
fbc9be10	25	obj-$(CONFIG_ARCH_OMAP4) += omap44xx-smc.o omap4-common.o
d660f9a2	26
fe297dde JR	27	plus_sec := $(call as-instr,.arch_extension sec,+sec)
	28	AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec)
	29	AFLAGS_omap44xx-smc.o :=-Wa,-march=armv7-a$(plus_sec)
934f8be7	30
c2d43e39 TL	31	# Functions loaded to SRAM
	32	obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o
	33	obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o
cc26b3b0	34	obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o
c2d43e39	35
56213ca4 TL	36	AFLAGS_sram242x.o :=-Wa,-march=armv6
	37	AFLAGS_sram243x.o :=-Wa,-march=armv6
	38	AFLAGS_sram34xx.o :=-Wa,-march=armv7-a
	39
ddaa912a	40	# Pin multiplexing
fc440461	41	obj-$(CONFIG_ARCH_OMAP2420) += mux2420.o
89ba1092	42	obj-$(CONFIG_ARCH_OMAP2430) += mux2430.o
ddaa912a	43	obj-$(CONFIG_ARCH_OMAP3) += mux34xx.o
a041a52c	44	obj-$(CONFIG_ARCH_OMAP4) += mux44xx.o
ddaa912a	45
f2ab9977 PW	46	# SMS/SDRC
	47	obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o
	48	# obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o
	49
fd1478cd NM	50	# OPP table initialization
	51	ifeq ($(CONFIG_PM_OPP),y)
	52	obj-y += opp.o
	53	obj-$(CONFIG_ARCH_OMAP3) += opp3xxx_data.o
f5a6422d	54	obj-$(CONFIG_ARCH_OMAP4) += opp4xxx_data.o
fd1478cd NM	55	endif
fd1478cd NM	56
120db2cb	57	# Power Management
1835f1d7	58	ifeq ($(CONFIG_PM),y)
8bd22949	59	obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
2f34ce81 TG	60	obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o pm_bus.o voltage.o
	61	obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o voltage.o \
	62	cpuidle34xx.o pm_bus.o
57e6fe7b	63	obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o pm_bus.o
8bd22949	64	obj-$(CONFIG_PM_DEBUG) += pm-debug.o
0c0a5d61	65	obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o
56213ca4 TL	66
	67	AFLAGS_sleep24xx.o :=-Wa,-march=armv6
	68	AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a
	69
57e6fe7b KH	70	ifeq ($(CONFIG_PM_VERBOSE),y)
	71	CFLAGS_pm_bus.o += -DDEBUG
	72	endif
	73
1835f1d7	74	endif
120db2cb	75
71348bca	76	# PRCM
59fb659b PW	77	obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
	78	obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
	79	# XXX The presence of cm2xxx_3xxx.o on the line below is temporary and
	80	# will be removed once the OMAP4 part of the codebase is converted to
	81	# use OMAP4-specific PRCM functions.
2ace831f PW	82	obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cminst44xx.o \
	83	cm44xx.o prcm_mpu44xx.o \
	84	prminst44xx.o
74bea6b9 RN	85
74bea6b9 RN	86	# OMAP powerdomain framework
6e01478a	87	powerdomain-common += powerdomain.o powerdomain-common.o
f327e07b	88	obj-$(CONFIG_ARCH_OMAP2) += $(powerdomain-common) \
6e01478a PW	89	powerdomain2xxx_3xxx.o \
	90	powerdomains2xxx_data.o \
	91	powerdomains2xxx_3xxx_data.o
f327e07b	92	obj-$(CONFIG_ARCH_OMAP3) += $(powerdomain-common) \
6e01478a PW	93	powerdomain2xxx_3xxx.o \
	94	powerdomains3xxx_data.o \
	95	powerdomains2xxx_3xxx_data.o
f327e07b	96	obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common) \
6e01478a PW	97	powerdomain44xx.o \
6e01478a PW	98	powerdomains44xx_data.o
71348bca	99
dc0b3a70 PW	100	# PRCM clockdomain control
	101	obj-$(CONFIG_ARCH_OMAP2) += clockdomain.o \
	102	clockdomains2xxx_3xxx_data.o
	103	obj-$(CONFIG_ARCH_OMAP3) += clockdomain.o \
	104	clockdomains2xxx_3xxx_data.o
	105	obj-$(CONFIG_ARCH_OMAP4) += clockdomain.o \
	106	clockdomains44xx_data.o
3d876e59	107	# Clock framework
657ebfad	108	obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o \
81b34fbe	109	clkt2xxx_sys.o \
657ebfad PW	110	clkt2xxx_dpllcore.o \
	111	clkt2xxx_virt_prcm_set.o \
	112	clkt2xxx_apll.o clkt2xxx_osc.o
81b34fbe PW	113	obj-$(CONFIG_ARCH_OMAP2420) += clock2420_data.o
81b34fbe PW	114	obj-$(CONFIG_ARCH_OMAP2430) += clock2430.o clock2430_data.o
657ebfad PW	115	obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o \
	116	clock34xx.o clkt34xx_dpll3m2.o \
	117	clock3517.o clock36xx.o \
	118	dpll3xxx.o clock3xxx_data.o
	119	obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o \
	120	dpll3xxx.o
	121
	122	# OMAP2 clock rate set data (old "OPP" data)
d8a94458	123	obj-$(CONFIG_ARCH_OMAP2420) += opp2420_data.o
d8a94458	124	obj-$(CONFIG_ARCH_OMAP2430) += opp2430_data.o
3d876e59	125
7359154e PW	126	# hwmod data
	127	obj-$(CONFIG_ARCH_OMAP2420) += omap_hwmod_2420_data.o
	128	obj-$(CONFIG_ARCH_OMAP2430) += omap_hwmod_2430_data.o
	129	obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_3xxx_data.o
55d2cb08	130	obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o
3d876e59	131
183bd50f	132	# EMU peripherals
657ebfad	133	obj-$(CONFIG_OMAP3_EMU) += emu.o
183bd50f	134
59fdc6eb S	135	obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
	136	mailbox_mach-objs := mailbox.o
	137
0bbc6fcf HD	138	obj-$(CONFIG_OMAP_IOMMU) += iommu2.o
	139
	140	iommu-$(CONFIG_OMAP_IOMMU) := omap-iommu.o
	141	obj-y += $(iommu-m) $(iommu-y)
caf60779	142
b63128e8 TL	143	i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
	144	obj-y += $(i2c-omap-m) $(i2c-omap-y)
	145
90173882 FC	146	ifneq ($(CONFIG_TIDSPBRIDGE),)
	147	obj-y += dsp.o
	148	endif
	149
1dbae815 TL	150	# Specific board support
	151	obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
	152	obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
90c62bf0	153	obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o \
d02a900b	154	hsmmc.o
120db2cb	155	obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
90c62bf0	156	obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \
d02a900b	157	hsmmc.o
476544ca TW	158	obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o \
476544ca TW	159	hsmmc.o
90c62bf0	160	obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \
2430f9df	161	board-flash.o \
d02a900b	162	hsmmc.o
d40f3f15 TN	163	obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o \
	164	hsmmc.o
	165	obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o \
	166	hsmmc.o
90c62bf0	167	obj-$(CONFIG_MACH_OVERO) += board-overo.o \
d02a900b	168	hsmmc.o
53c5ec31	169	obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \
d02a900b	170	hsmmc.o
90c62bf0	171	obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \
d02a900b	172	hsmmc.o
6fdc29e2	173	obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \
d02a900b	174	hsmmc.o \
13d6b73c	175	board-flash.o
63138812	176	obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
2d200665 AK	177	obj-$(CONFIG_MACH_NOKIA_RM680) += board-rm680.o \
	178	sdram-nokia.o \
	179	hsmmc.o
ffe7f95b	180	obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
6c3bc4eb	181	sdram-nokia.o \
ffe7f95b	182	board-rx51-peripherals.o \
03e11104	183	board-rx51-video.o \
d02a900b	184	hsmmc.o
20826853	185	obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom.o \
479f12c9	186	board-zoom-peripherals.o \
7e7eb426	187	board-flash.o \
d02a900b	188	hsmmc.o \
577145f4	189	board-zoom-debugboard.o
20826853	190	obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom.o \
5f35fbe8	191	board-zoom-peripherals.o \
e08b105e	192	board-flash.o \
d02a900b	193	hsmmc.o \
577145f4	194	board-zoom-debugboard.o
34c9ac23	195	obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o \
34c9ac23	196	board-zoom-peripherals.o \
7875eea5	197	board-flash.o \
d02a900b	198	hsmmc.o
2886d128	199	obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \
d02a900b	200	hsmmc.o
d04b620e	201	obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o
58e11162	202	obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \
d02a900b	203	hsmmc.o
e844b1da EBS	204	obj-$(CONFIG_MACH_IGEP0030) += board-igep0030.o \
e844b1da EBS	205	hsmmc.o
7a079cab	206	obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \
d02a900b	207	hsmmc.o
717c1fbf	208	obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o \
717c1fbf	209	hsmmc.o
b075f58b DA	210	obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o \
b075f58b DA	211	hsmmc.o
ad19d8d9	212
657ebfad	213	obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o
c625327e	214
1cb125ca S	215	obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o
1cb125ca S	216
9cbc3493 J	217	obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o \
9cbc3493 J	218	hsmmc.o
18cb7aca	219	# Platform specific device init code
b5e8905b TL	220	usbfs-$(CONFIG_ARCH_OMAP_OTG) := usb-fs.o
b5e8905b TL	221	obj-y += $(usbfs-m) $(usbfs-y)
18cb7aca	222	obj-y += usb-musb.o
1b52d5df	223	obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
58a5491c	224	obj-y += usb-ehci.o
aa62e90f JY	225
	226	onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o
	227	obj-y += $(onenand-m) $(onenand-y)
1a48e157	228
2f70a1e9 VS	229	nand-$(CONFIG_MTD_NAND_OMAP2) := gpmc-nand.o
	230	obj-y += $(nand-m) $(nand-y)
	231
1a48e157 TL	232	smc91x-$(CONFIG_SMC91X) := gpmc-smc91x.o
1a48e157 TL	233	obj-y += $(smc91x-m) $(smc91x-y)
cdd280b9 TN	234
	235	smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o
	236	obj-y += $(smsc911x-m) $(smsc911x-y)