Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* |
dbdf9ced | 2 | * linux/arch/arm/mach-omap1/board-h3.c |
1da177e4 LT |
3 | * |
4 | * This file contains OMAP1710 H3 specific code. | |
5 | * | |
6 | * Copyright (C) 2004 Texas Instruments, Inc. | |
7 | * Copyright (C) 2002 MontaVista Software, Inc. | |
8 | * Copyright (C) 2001 RidgeRun, Inc. | |
9 | * Author: RidgeRun, Inc. | |
10 | * Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com | |
11 | * | |
12 | * This program is free software; you can redistribute it and/or modify | |
13 | * it under the terms of the GNU General Public License version 2 as | |
14 | * published by the Free Software Foundation. | |
15 | */ | |
16 | ||
1da177e4 LT |
17 | #include <linux/types.h> |
18 | #include <linux/init.h> | |
19 | #include <linux/major.h> | |
20 | #include <linux/kernel.h> | |
d052d1be | 21 | #include <linux/platform_device.h> |
1da177e4 | 22 | #include <linux/errno.h> |
9b6553cd | 23 | #include <linux/workqueue.h> |
8056c6cb | 24 | #include <linux/i2c.h> |
1da177e4 | 25 | #include <linux/mtd/mtd.h> |
9b6553cd | 26 | #include <linux/mtd/nand.h> |
1da177e4 | 27 | #include <linux/mtd/partitions.h> |
9b6553cd | 28 | #include <linux/input.h> |
1da177e4 LT |
29 | |
30 | #include <asm/setup.h> | |
31 | #include <asm/page.h> | |
32 | #include <asm/hardware.h> | |
8056c6cb DB |
33 | #include <asm/gpio.h> |
34 | ||
1da177e4 LT |
35 | #include <asm/mach-types.h> |
36 | #include <asm/mach/arch.h> | |
37 | #include <asm/mach/flash.h> | |
38 | #include <asm/mach/map.h> | |
39 | ||
8056c6cb | 40 | #include <asm/arch/tps65010.h> |
9b6553cd | 41 | #include <asm/arch/gpioexpander.h> |
1da177e4 LT |
42 | #include <asm/arch/irqs.h> |
43 | #include <asm/arch/mux.h> | |
44 | #include <asm/arch/tc.h> | |
9b6553cd | 45 | #include <asm/arch/irda.h> |
1da177e4 | 46 | #include <asm/arch/usb.h> |
9b6553cd TL |
47 | #include <asm/arch/keypad.h> |
48 | #include <asm/arch/dma.h> | |
d48af15e | 49 | #include <asm/arch/common.h> |
a524626b TL |
50 | #include <asm/arch/mcbsp.h> |
51 | #include <asm/arch/omap-alsa.h> | |
1da177e4 LT |
52 | |
53 | extern int omap_gpio_init(void); | |
54 | ||
9b6553cd TL |
55 | static int h3_keymap[] = { |
56 | KEY(0, 0, KEY_LEFT), | |
57 | KEY(0, 1, KEY_RIGHT), | |
58 | KEY(0, 2, KEY_3), | |
59 | KEY(0, 3, KEY_F10), | |
60 | KEY(0, 4, KEY_F5), | |
61 | KEY(0, 5, KEY_9), | |
62 | KEY(1, 0, KEY_DOWN), | |
63 | KEY(1, 1, KEY_UP), | |
64 | KEY(1, 2, KEY_2), | |
65 | KEY(1, 3, KEY_F9), | |
66 | KEY(1, 4, KEY_F7), | |
67 | KEY(1, 5, KEY_0), | |
68 | KEY(2, 0, KEY_ENTER), | |
69 | KEY(2, 1, KEY_6), | |
70 | KEY(2, 2, KEY_1), | |
71 | KEY(2, 3, KEY_F2), | |
72 | KEY(2, 4, KEY_F6), | |
73 | KEY(2, 5, KEY_HOME), | |
74 | KEY(3, 0, KEY_8), | |
75 | KEY(3, 1, KEY_5), | |
76 | KEY(3, 2, KEY_F12), | |
77 | KEY(3, 3, KEY_F3), | |
78 | KEY(3, 4, KEY_F8), | |
79 | KEY(3, 5, KEY_END), | |
80 | KEY(4, 0, KEY_7), | |
81 | KEY(4, 1, KEY_4), | |
82 | KEY(4, 2, KEY_F11), | |
83 | KEY(4, 3, KEY_F1), | |
84 | KEY(4, 4, KEY_F4), | |
85 | KEY(4, 5, KEY_ESC), | |
86 | KEY(5, 0, KEY_F13), | |
87 | KEY(5, 1, KEY_F14), | |
88 | KEY(5, 2, KEY_F15), | |
89 | KEY(5, 3, KEY_F16), | |
90 | KEY(5, 4, KEY_SLEEP), | |
91 | 0 | |
92 | }; | |
93 | ||
94 | ||
95 | static struct mtd_partition nor_partitions[] = { | |
1da177e4 LT |
96 | /* bootloader (U-Boot, etc) in first sector */ |
97 | { | |
98 | .name = "bootloader", | |
99 | .offset = 0, | |
100 | .size = SZ_128K, | |
101 | .mask_flags = MTD_WRITEABLE, /* force read-only */ | |
102 | }, | |
103 | /* bootloader params in the next sector */ | |
104 | { | |
105 | .name = "params", | |
106 | .offset = MTDPART_OFS_APPEND, | |
107 | .size = SZ_128K, | |
108 | .mask_flags = 0, | |
109 | }, | |
110 | /* kernel */ | |
111 | { | |
112 | .name = "kernel", | |
113 | .offset = MTDPART_OFS_APPEND, | |
114 | .size = SZ_2M, | |
115 | .mask_flags = 0 | |
116 | }, | |
117 | /* file system */ | |
118 | { | |
119 | .name = "filesystem", | |
120 | .offset = MTDPART_OFS_APPEND, | |
121 | .size = MTDPART_SIZ_FULL, | |
122 | .mask_flags = 0 | |
123 | } | |
124 | }; | |
125 | ||
9b6553cd | 126 | static struct flash_platform_data nor_data = { |
1da177e4 LT |
127 | .map_name = "cfi_probe", |
128 | .width = 2, | |
9b6553cd TL |
129 | .parts = nor_partitions, |
130 | .nr_parts = ARRAY_SIZE(nor_partitions), | |
1da177e4 LT |
131 | }; |
132 | ||
9b6553cd | 133 | static struct resource nor_resource = { |
7c38cf02 | 134 | /* This is on CS3, wherever it's mapped */ |
1da177e4 LT |
135 | .flags = IORESOURCE_MEM, |
136 | }; | |
137 | ||
9b6553cd | 138 | static struct platform_device nor_device = { |
1da177e4 LT |
139 | .name = "omapflash", |
140 | .id = 0, | |
141 | .dev = { | |
9b6553cd TL |
142 | .platform_data = &nor_data, |
143 | }, | |
144 | .num_resources = 1, | |
145 | .resource = &nor_resource, | |
146 | }; | |
147 | ||
148 | static struct mtd_partition nand_partitions[] = { | |
149 | #if 0 | |
150 | /* REVISIT: enable these partitions if you make NAND BOOT work */ | |
151 | { | |
152 | .name = "xloader", | |
153 | .offset = 0, | |
154 | .size = 64 * 1024, | |
155 | .mask_flags = MTD_WRITEABLE, /* force read-only */ | |
156 | }, | |
157 | { | |
158 | .name = "bootloader", | |
159 | .offset = MTDPART_OFS_APPEND, | |
160 | .size = 256 * 1024, | |
161 | .mask_flags = MTD_WRITEABLE, /* force read-only */ | |
162 | }, | |
163 | { | |
164 | .name = "params", | |
165 | .offset = MTDPART_OFS_APPEND, | |
166 | .size = 192 * 1024, | |
167 | }, | |
168 | { | |
169 | .name = "kernel", | |
170 | .offset = MTDPART_OFS_APPEND, | |
171 | .size = 2 * SZ_1M, | |
172 | }, | |
173 | #endif | |
174 | { | |
175 | .name = "filesystem", | |
176 | .size = MTDPART_SIZ_FULL, | |
177 | .offset = MTDPART_OFS_APPEND, | |
178 | }, | |
179 | }; | |
180 | ||
181 | /* dip switches control NAND chip access: 8 bit, 16 bit, or neither */ | |
182 | static struct nand_platform_data nand_data = { | |
183 | .options = NAND_SAMSUNG_LP_OPTIONS, | |
184 | .parts = nand_partitions, | |
185 | .nr_parts = ARRAY_SIZE(nand_partitions), | |
186 | }; | |
187 | ||
188 | static struct resource nand_resource = { | |
189 | .flags = IORESOURCE_MEM, | |
190 | }; | |
191 | ||
192 | static struct platform_device nand_device = { | |
193 | .name = "omapnand", | |
194 | .id = 0, | |
195 | .dev = { | |
196 | .platform_data = &nand_data, | |
1da177e4 LT |
197 | }, |
198 | .num_resources = 1, | |
9b6553cd | 199 | .resource = &nand_resource, |
1da177e4 LT |
200 | }; |
201 | ||
202 | static struct resource smc91x_resources[] = { | |
203 | [0] = { | |
204 | .start = OMAP1710_ETHR_START, /* Physical */ | |
205 | .end = OMAP1710_ETHR_START + 0xf, | |
206 | .flags = IORESOURCE_MEM, | |
207 | }, | |
208 | [1] = { | |
209 | .start = OMAP_GPIO_IRQ(40), | |
210 | .end = OMAP_GPIO_IRQ(40), | |
211 | .flags = IORESOURCE_IRQ, | |
212 | }, | |
213 | }; | |
214 | ||
215 | static struct platform_device smc91x_device = { | |
216 | .name = "smc91x", | |
217 | .id = 0, | |
218 | .num_resources = ARRAY_SIZE(smc91x_resources), | |
219 | .resource = smc91x_resources, | |
220 | }; | |
221 | ||
222 | #define GPTIMER_BASE 0xFFFB1400 | |
223 | #define GPTIMER_REGS(x) (0xFFFB1400 + (x * 0x800)) | |
224 | #define GPTIMER_REGS_SIZE 0x46 | |
225 | ||
226 | static struct resource intlat_resources[] = { | |
227 | [0] = { | |
228 | .start = GPTIMER_REGS(0), /* Physical */ | |
229 | .end = GPTIMER_REGS(0) + GPTIMER_REGS_SIZE, | |
230 | .flags = IORESOURCE_MEM, | |
231 | }, | |
232 | [1] = { | |
233 | .start = INT_1610_GPTIMER1, | |
234 | .end = INT_1610_GPTIMER1, | |
235 | .flags = IORESOURCE_IRQ, | |
236 | }, | |
237 | }; | |
238 | ||
239 | static struct platform_device intlat_device = { | |
240 | .name = "omap_intlat", | |
241 | .id = 0, | |
242 | .num_resources = ARRAY_SIZE(intlat_resources), | |
243 | .resource = intlat_resources, | |
244 | }; | |
245 | ||
9b6553cd TL |
246 | static struct resource h3_kp_resources[] = { |
247 | [0] = { | |
248 | .start = INT_KEYBOARD, | |
249 | .end = INT_KEYBOARD, | |
250 | .flags = IORESOURCE_IRQ, | |
251 | }, | |
252 | }; | |
253 | ||
254 | static struct omap_kp_platform_data h3_kp_data = { | |
4d24607b KS |
255 | .rows = 8, |
256 | .cols = 8, | |
257 | .keymap = h3_keymap, | |
258 | .keymapsize = ARRAY_SIZE(h3_keymap), | |
259 | .rep = 1, | |
260 | .delay = 9, | |
261 | .dbounce = 1, | |
9b6553cd TL |
262 | }; |
263 | ||
264 | static struct platform_device h3_kp_device = { | |
265 | .name = "omap-keypad", | |
266 | .id = -1, | |
267 | .dev = { | |
268 | .platform_data = &h3_kp_data, | |
269 | }, | |
270 | .num_resources = ARRAY_SIZE(h3_kp_resources), | |
271 | .resource = h3_kp_resources, | |
272 | }; | |
273 | ||
274 | ||
275 | /* Select between the IrDA and aGPS module | |
276 | */ | |
277 | static int h3_select_irda(struct device *dev, int state) | |
278 | { | |
279 | unsigned char expa; | |
280 | int err = 0; | |
281 | ||
282 | if ((err = read_gpio_expa(&expa, 0x26))) { | |
283 | printk(KERN_ERR "Error reading from I/O EXPANDER \n"); | |
284 | return err; | |
285 | } | |
286 | ||
287 | /* 'P6' enable/disable IRDA_TX and IRDA_RX */ | |
288 | if (state & IR_SEL) { /* IrDA */ | |
289 | if ((err = write_gpio_expa(expa | 0x40, 0x26))) { | |
290 | printk(KERN_ERR "Error writing to I/O EXPANDER \n"); | |
291 | return err; | |
292 | } | |
293 | } else { | |
294 | if ((err = write_gpio_expa(expa & ~0x40, 0x26))) { | |
295 | printk(KERN_ERR "Error writing to I/O EXPANDER \n"); | |
296 | return err; | |
297 | } | |
298 | } | |
299 | return err; | |
300 | } | |
301 | ||
666cd174 | 302 | static void set_trans_mode(struct work_struct *work) |
9b6553cd | 303 | { |
666cd174 DB |
304 | struct omap_irda_config *irda_config = |
305 | container_of(work, struct omap_irda_config, gpio_expa.work); | |
306 | int mode = irda_config->mode; | |
9b6553cd TL |
307 | unsigned char expa; |
308 | int err = 0; | |
309 | ||
310 | if ((err = read_gpio_expa(&expa, 0x27)) != 0) { | |
311 | printk(KERN_ERR "Error reading from I/O expander\n"); | |
312 | } | |
313 | ||
314 | expa &= ~0x03; | |
315 | ||
666cd174 | 316 | if (mode & IR_SIRMODE) { |
9b6553cd TL |
317 | expa |= 0x01; |
318 | } else { /* MIR/FIR */ | |
319 | expa |= 0x03; | |
320 | } | |
321 | ||
322 | if ((err = write_gpio_expa(expa, 0x27)) != 0) { | |
323 | printk(KERN_ERR "Error writing to I/O expander\n"); | |
324 | } | |
325 | } | |
326 | ||
327 | static int h3_transceiver_mode(struct device *dev, int mode) | |
328 | { | |
329 | struct omap_irda_config *irda_config = dev->platform_data; | |
330 | ||
666cd174 | 331 | irda_config->mode = mode; |
9b6553cd | 332 | cancel_delayed_work(&irda_config->gpio_expa); |
666cd174 | 333 | PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode); |
6d5aefb8 | 334 | schedule_delayed_work(&irda_config->gpio_expa, 0); |
9b6553cd TL |
335 | |
336 | return 0; | |
337 | } | |
338 | ||
339 | static struct omap_irda_config h3_irda_data = { | |
340 | .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE, | |
341 | .transceiver_mode = h3_transceiver_mode, | |
342 | .select_irda = h3_select_irda, | |
343 | .rx_channel = OMAP_DMA_UART3_RX, | |
344 | .tx_channel = OMAP_DMA_UART3_TX, | |
345 | .dest_start = UART3_THR, | |
346 | .src_start = UART3_RHR, | |
347 | .tx_trigger = 0, | |
348 | .rx_trigger = 0, | |
349 | }; | |
350 | ||
351 | static struct resource h3_irda_resources[] = { | |
352 | [0] = { | |
353 | .start = INT_UART3, | |
354 | .end = INT_UART3, | |
355 | .flags = IORESOURCE_IRQ, | |
356 | }, | |
357 | }; | |
358 | ||
a524626b TL |
359 | static u64 irda_dmamask = 0xffffffff; |
360 | ||
9b6553cd TL |
361 | static struct platform_device h3_irda_device = { |
362 | .name = "omapirda", | |
363 | .id = 0, | |
364 | .dev = { | |
365 | .platform_data = &h3_irda_data, | |
a524626b | 366 | .dma_mask = &irda_dmamask, |
9b6553cd TL |
367 | }, |
368 | .num_resources = ARRAY_SIZE(h3_irda_resources), | |
369 | .resource = h3_irda_resources, | |
370 | }; | |
371 | ||
372 | static struct platform_device h3_lcd_device = { | |
373 | .name = "lcd_h3", | |
374 | .id = -1, | |
375 | }; | |
376 | ||
a524626b TL |
377 | static struct omap_mcbsp_reg_cfg mcbsp_regs = { |
378 | .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), | |
379 | .spcr1 = RINTM(3) | RRST, | |
380 | .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | | |
381 | RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1), | |
382 | .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16), | |
383 | .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | | |
384 | XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG, | |
385 | .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16), | |
386 | .srgr1 = FWID(15), | |
387 | .srgr2 = GSYNC | CLKSP | FSGM | FPER(31), | |
388 | ||
389 | .pcr0 = CLKRM | SCLKME | FSXP | FSRP | CLKXP | CLKRP, | |
390 | //.pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ | |
391 | }; | |
392 | ||
393 | static struct omap_alsa_codec_config alsa_config = { | |
394 | .name = "H3 TSC2101", | |
395 | .mcbsp_regs_alsa = &mcbsp_regs, | |
396 | .codec_configure_dev = NULL, // tsc2101_configure, | |
397 | .codec_set_samplerate = NULL, // tsc2101_set_samplerate, | |
398 | .codec_clock_setup = NULL, // tsc2101_clock_setup, | |
399 | .codec_clock_on = NULL, // tsc2101_clock_on, | |
400 | .codec_clock_off = NULL, // tsc2101_clock_off, | |
401 | .get_default_samplerate = NULL, // tsc2101_get_default_samplerate, | |
402 | }; | |
403 | ||
404 | static struct platform_device h3_mcbsp1_device = { | |
405 | .name = "omap_alsa_mcbsp", | |
406 | .id = 1, | |
407 | .dev = { | |
408 | .platform_data = &alsa_config, | |
409 | }, | |
410 | }; | |
411 | ||
1da177e4 | 412 | static struct platform_device *devices[] __initdata = { |
9b6553cd TL |
413 | &nor_device, |
414 | &nand_device, | |
1da177e4 LT |
415 | &smc91x_device, |
416 | &intlat_device, | |
9b6553cd TL |
417 | &h3_irda_device, |
418 | &h3_kp_device, | |
419 | &h3_lcd_device, | |
a524626b | 420 | &h3_mcbsp1_device, |
1da177e4 LT |
421 | }; |
422 | ||
423 | static struct omap_usb_config h3_usb_config __initdata = { | |
424 | /* usb1 has a Mini-AB port and external isp1301 transceiver */ | |
425 | .otg = 2, | |
426 | ||
427 | #ifdef CONFIG_USB_GADGET_OMAP | |
428 | .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */ | |
429 | #elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) | |
430 | /* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */ | |
431 | .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */ | |
432 | #endif | |
433 | ||
434 | .pins[1] = 3, | |
435 | }; | |
436 | ||
7c38cf02 TL |
437 | static struct omap_mmc_config h3_mmc_config __initdata = { |
438 | .mmc[0] = { | |
439 | .enabled = 1, | |
440 | .power_pin = -1, /* tps65010 GPIO4 */ | |
441 | .switch_pin = OMAP_MPUIO(1), | |
442 | }, | |
443 | }; | |
444 | ||
3179a019 TL |
445 | static struct omap_uart_config h3_uart_config __initdata = { |
446 | .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), | |
447 | }; | |
448 | ||
449 | static struct omap_lcd_config h3_lcd_config __initdata = { | |
3179a019 TL |
450 | .ctrl_name = "internal", |
451 | }; | |
452 | ||
1da177e4 | 453 | static struct omap_board_config_kernel h3_config[] = { |
3179a019 TL |
454 | { OMAP_TAG_USB, &h3_usb_config }, |
455 | { OMAP_TAG_MMC, &h3_mmc_config }, | |
456 | { OMAP_TAG_UART, &h3_uart_config }, | |
457 | { OMAP_TAG_LCD, &h3_lcd_config }, | |
1da177e4 LT |
458 | }; |
459 | ||
8056c6cb DB |
460 | static struct i2c_board_info __initdata h3_i2c_board_info[] = { |
461 | { | |
462 | I2C_BOARD_INFO("tps65010", 0x48), | |
463 | .type = "tps65013", | |
464 | /* .irq = OMAP_GPIO_IRQ(??), */ | |
465 | }, | |
466 | /* TODO when driver support is ready: | |
467 | * - isp1301 OTG transceiver | |
468 | * - optional ov9640 camera sensor at 0x30 | |
469 | * - ... | |
470 | */ | |
471 | }; | |
472 | ||
9b6553cd TL |
473 | #define H3_NAND_RB_GPIO_PIN 10 |
474 | ||
475 | static int nand_dev_ready(struct nand_platform_data *data) | |
476 | { | |
477 | return omap_get_gpio_datain(H3_NAND_RB_GPIO_PIN); | |
478 | } | |
479 | ||
1da177e4 LT |
480 | static void __init h3_init(void) |
481 | { | |
9b6553cd TL |
482 | /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped |
483 | * to address 0 by a dip switch), NAND on CS2B. The NAND driver will | |
484 | * notice whether a NAND chip is enabled at probe time. | |
485 | * | |
486 | * H3 support NAND-boot, with a dip switch to put NOR on CS2B and NAND | |
487 | * (which on H2 may be 16bit) on CS3. Try detecting that in code here, | |
488 | * to avoid probing every possible flash configuration... | |
489 | */ | |
490 | nor_resource.end = nor_resource.start = omap_cs3_phys(); | |
491 | nor_resource.end += SZ_32M - 1; | |
492 | ||
493 | nand_resource.end = nand_resource.start = OMAP_CS2B_PHYS; | |
494 | nand_resource.end += SZ_4K - 1; | |
495 | if (!(omap_request_gpio(H3_NAND_RB_GPIO_PIN))) | |
496 | nand_data.dev_ready = nand_dev_ready; | |
497 | ||
498 | /* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */ | |
499 | /* GPIO10 pullup/down register, Enable pullup on GPIO10 */ | |
500 | omap_cfg_reg(V2_1710_GPIO10); | |
501 | ||
502 | platform_add_devices(devices, ARRAY_SIZE(devices)); | |
7c38cf02 TL |
503 | omap_board_config = h3_config; |
504 | omap_board_config_size = ARRAY_SIZE(h3_config); | |
3179a019 | 505 | omap_serial_init(); |
8056c6cb DB |
506 | |
507 | /* FIXME setup irq for tps65013 chip */ | |
508 | i2c_register_board_info(1, h3_i2c_board_info, | |
509 | ARRAY_SIZE(h3_i2c_board_info)); | |
1da177e4 LT |
510 | } |
511 | ||
512 | static void __init h3_init_smc91x(void) | |
513 | { | |
514 | omap_cfg_reg(W15_1710_GPIO40); | |
515 | if (omap_request_gpio(40) < 0) { | |
516 | printk("Error requesting gpio 40 for smc91x irq\n"); | |
517 | return; | |
518 | } | |
1da177e4 LT |
519 | } |
520 | ||
277d58ef | 521 | static void __init h3_init_irq(void) |
1da177e4 | 522 | { |
87bd63f6 | 523 | omap1_init_common_hw(); |
1da177e4 LT |
524 | omap_init_irq(); |
525 | omap_gpio_init(); | |
526 | h3_init_smc91x(); | |
527 | } | |
528 | ||
529 | static void __init h3_map_io(void) | |
530 | { | |
87bd63f6 | 531 | omap1_map_common_io(); |
1da177e4 LT |
532 | } |
533 | ||
8056c6cb DB |
534 | #ifdef CONFIG_TPS65010 |
535 | static int __init h3_tps_init(void) | |
536 | { | |
537 | if (!machine_is_omap_h3()) | |
538 | return 0; | |
539 | ||
540 | /* gpio4 for SD, gpio3 for VDD_DSP */ | |
541 | /* FIXME send power to DSP iff it's configured */ | |
542 | ||
543 | /* Enable LOW_PWR */ | |
544 | tps65013_set_low_pwr(ON); | |
545 | ||
546 | return 0; | |
547 | } | |
548 | fs_initcall(h3_tps_init); | |
549 | #endif | |
550 | ||
1da177e4 | 551 | MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") |
e9dea0c6 | 552 | /* Maintainer: Texas Instruments, Inc. */ |
e9dea0c6 RK |
553 | .phys_io = 0xfff00000, |
554 | .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, | |
555 | .boot_params = 0x10000100, | |
556 | .map_io = h3_map_io, | |
557 | .init_irq = h3_init_irq, | |
558 | .init_machine = h3_init, | |
1da177e4 LT |
559 | .timer = &omap_timer, |
560 | MACHINE_END |