Commit | Line | Data |
---|---|---|
28ad94ec AR |
1 | /* |
2 | * Copyright STMicroelectronics, 2007. | |
3 | * | |
4 | * This program is free software; you can redistribute it and/or modify | |
5 | * it under the terms of the GNU General Public License as published by | |
6 | * the Free Software Foundation; either version 2 of the License, or | |
7 | * (at your option) any later version. | |
8 | * | |
9 | * This program is distributed in the hope that it will be useful, | |
10 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
11 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
12 | * GNU General Public License for more details. | |
13 | * | |
14 | * You should have received a copy of the GNU General Public License | |
15 | * along with this program; if not, write to the Free Software | |
16 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
17 | */ | |
18 | ||
19 | #include <linux/types.h> | |
20 | #include <linux/init.h> | |
21 | #include <linux/device.h> | |
2ec1d359 | 22 | #include <linux/amba/bus.h> |
3e3c62ca | 23 | #include <linux/platform_device.h> |
35b47a40 | 24 | #include <linux/io.h> |
7c77852d LW |
25 | #include <linux/slab.h> |
26 | #include <linux/irq.h> | |
27 | #include <linux/dma-mapping.h> | |
f8635abd | 28 | #include <linux/of_irq.h> |
2ad6e398 | 29 | #include <linux/of_gpio.h> |
f8635abd LW |
30 | #include <linux/of_address.h> |
31 | #include <linux/of_platform.h> | |
2ad6e398 | 32 | #include <linux/gpio.h> |
28ad94ec | 33 | |
f8635abd | 34 | #include <asm/mach/arch.h> |
28ad94ec | 35 | #include <asm/mach/map.h> |
f8635abd | 36 | #include <asm/mach/time.h> |
27bda036 | 37 | #include <asm/mach-types.h> |
28ad94ec | 38 | |
0b260fd4 AR |
39 | #include <asm/cacheflush.h> |
40 | #include <asm/hardware/cache-l2x0.h> | |
41 | ||
dea3eacd LW |
42 | /* |
43 | * These are the only hard-coded address offsets we still have to use. | |
44 | */ | |
45 | #define NOMADIK_FSMC_BASE 0x10100000 /* FSMC registers */ | |
46 | #define NOMADIK_SDRAMC_BASE 0x10110000 /* SDRAM Controller */ | |
47 | #define NOMADIK_CLCDC_BASE 0x10120000 /* CLCD Controller */ | |
48 | #define NOMADIK_MDIF_BASE 0x10120000 /* MDIF */ | |
49 | #define NOMADIK_DMA0_BASE 0x10130000 /* DMA0 Controller */ | |
50 | #define NOMADIK_IC_BASE 0x10140000 /* Vectored Irq Controller */ | |
51 | #define NOMADIK_DMA1_BASE 0x10150000 /* DMA1 Controller */ | |
52 | #define NOMADIK_USB_BASE 0x10170000 /* USB-OTG conf reg base */ | |
53 | #define NOMADIK_CRYP_BASE 0x10180000 /* Crypto processor */ | |
54 | #define NOMADIK_SHA1_BASE 0x10190000 /* SHA-1 Processor */ | |
55 | #define NOMADIK_XTI_BASE 0x101A0000 /* XTI */ | |
56 | #define NOMADIK_RNG_BASE 0x101B0000 /* Random number generator */ | |
57 | #define NOMADIK_SRC_BASE 0x101E0000 /* SRC base */ | |
58 | #define NOMADIK_WDOG_BASE 0x101E1000 /* Watchdog */ | |
59 | #define NOMADIK_MTU0_BASE 0x101E2000 /* Multiple Timer 0 */ | |
60 | #define NOMADIK_MTU1_BASE 0x101E3000 /* Multiple Timer 1 */ | |
61 | #define NOMADIK_GPIO0_BASE 0x101E4000 /* GPIO0 */ | |
62 | #define NOMADIK_GPIO1_BASE 0x101E5000 /* GPIO1 */ | |
63 | #define NOMADIK_GPIO2_BASE 0x101E6000 /* GPIO2 */ | |
64 | #define NOMADIK_GPIO3_BASE 0x101E7000 /* GPIO3 */ | |
65 | #define NOMADIK_RTC_BASE 0x101E8000 /* Real Time Clock base */ | |
66 | #define NOMADIK_PMU_BASE 0x101E9000 /* Power Management Unit */ | |
67 | #define NOMADIK_OWM_BASE 0x101EA000 /* One wire master */ | |
68 | #define NOMADIK_SCR_BASE 0x101EF000 /* Secure Control registers */ | |
69 | #define NOMADIK_MSP2_BASE 0x101F0000 /* MSP 2 interface */ | |
70 | #define NOMADIK_MSP1_BASE 0x101F1000 /* MSP 1 interface */ | |
71 | #define NOMADIK_UART2_BASE 0x101F2000 /* UART 2 interface */ | |
72 | #define NOMADIK_SSIRx_BASE 0x101F3000 /* SSI 8-ch rx interface */ | |
73 | #define NOMADIK_SSITx_BASE 0x101F4000 /* SSI 8-ch tx interface */ | |
74 | #define NOMADIK_MSHC_BASE 0x101F5000 /* Memory Stick(Pro) Host */ | |
75 | #define NOMADIK_SDI_BASE 0x101F6000 /* SD-card/MM-Card */ | |
76 | #define NOMADIK_I2C1_BASE 0x101F7000 /* I2C1 interface */ | |
77 | #define NOMADIK_I2C0_BASE 0x101F8000 /* I2C0 interface */ | |
78 | #define NOMADIK_MSP0_BASE 0x101F9000 /* MSP 0 interface */ | |
79 | #define NOMADIK_FIRDA_BASE 0x101FA000 /* FIrDA interface */ | |
80 | #define NOMADIK_UART1_BASE 0x101FB000 /* UART 1 interface */ | |
81 | #define NOMADIK_SSP_BASE 0x101FC000 /* SSP interface */ | |
82 | #define NOMADIK_UART0_BASE 0x101FD000 /* UART 0 interface */ | |
83 | #define NOMADIK_SGA_BASE 0x101FE000 /* SGA interface */ | |
84 | #define NOMADIK_L2CC_BASE 0x10210000 /* L2 Cache controller */ | |
85 | #define NOMADIK_UART1_VBASE 0xF01FB000 | |
86 | ||
dea3eacd LW |
87 | /* This is needed for LL-debug/earlyprintk/debug-macro.S */ |
88 | static struct map_desc cpu8815_io_desc[] __initdata = { | |
28ad94ec | 89 | { |
dea3eacd LW |
90 | .virtual = NOMADIK_UART1_VBASE, |
91 | .pfn = __phys_to_pfn(NOMADIK_UART1_BASE), | |
92 | .length = SZ_4K, | |
93 | .type = MT_DEVICE, | |
94 | }, | |
28ad94ec AR |
95 | }; |
96 | ||
5f66d482 | 97 | static void __init cpu8815_map_io(void) |
28ad94ec | 98 | { |
dea3eacd | 99 | iotable_init(cpu8815_io_desc, ARRAY_SIZE(cpu8815_io_desc)); |
28ad94ec AR |
100 | } |
101 | ||
7b6d864b | 102 | static void cpu8815_restart(enum reboot_mode mode, const char *cmd) |
35b47a40 | 103 | { |
dea3eacd | 104 | void __iomem *srcbase = ioremap(NOMADIK_SRC_BASE, SZ_4K); |
35b47a40 RK |
105 | |
106 | /* FIXME: use egpio when implemented */ | |
107 | ||
108 | /* Write anything to Reset status register */ | |
dea3eacd | 109 | writel(1, srcbase + 0x18); |
35b47a40 | 110 | } |
f8635abd | 111 | |
4fd243c6 LW |
112 | /* |
113 | * This GPIO pin turns on a line that is used to detect card insertion | |
114 | * on this board. | |
115 | */ | |
116 | static int __init cpu8815_mmcsd_init(void) | |
117 | { | |
118 | struct device_node *cdbias; | |
119 | int gpio, err; | |
120 | ||
121 | cdbias = of_find_node_by_path("/usb-s8815/mmcsd-gpio"); | |
122 | if (!cdbias) { | |
123 | pr_info("could not find MMC/SD card detect bias node\n"); | |
124 | return 0; | |
125 | } | |
126 | gpio = of_get_gpio(cdbias, 0); | |
127 | if (gpio < 0) { | |
128 | pr_info("could not obtain MMC/SD card detect bias GPIO\n"); | |
129 | return 0; | |
130 | } | |
131 | err = gpio_request(gpio, "card detect bias"); | |
132 | if (err) { | |
133 | pr_info("failed to request card detect bias GPIO %d\n", gpio); | |
134 | return -ENODEV; | |
135 | } | |
136 | err = gpio_direction_output(gpio, 0); | |
137 | if (err){ | |
138 | pr_info("failed to set GPIO %d as output, low\n", gpio); | |
139 | return err; | |
140 | } | |
141 | pr_info("enabled USB-S8815 CD bias GPIO %d, low\n", gpio); | |
142 | return 0; | |
143 | } | |
144 | device_initcall(cpu8815_mmcsd_init); | |
145 | ||
f8635abd LW |
146 | static const char * cpu8815_board_compat[] = { |
147 | "calaosystems,usb-s8815", | |
148 | NULL, | |
149 | }; | |
150 | ||
151 | DT_MACHINE_START(NOMADIK_DT, "Nomadik STn8815") | |
8523f615 RK |
152 | /* At full speed latency must be >=2, so 0x249 in low bits */ |
153 | .l2c_aux_val = 0x00700249, | |
154 | .l2c_aux_mask = 0xfe0fefff, | |
f8635abd | 155 | .map_io = cpu8815_map_io, |
f8635abd LW |
156 | .restart = cpu8815_restart, |
157 | .dt_compat = cpu8815_board_compat, | |
158 | MACHINE_END |