[linux-2.6-block.git] / arch / arm / mach-mmp / ttc_dkb.c

/*
 *  linux/arch/arm/mach-mmp/ttc_dkb.c
 *
 *  Support for the Marvell PXA910-based TTC_DKB Development Platform.
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License version 2 as
 *  publishhed by the Free Software Foundation.
 */

#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/onenand.h>
#include <linux/interrupt.h>
#include <linux/platform_data/pca953x.h>
#include <linux/gpio.h>
#include <linux/gpio-pxa.h>
#include <linux/mfd/88pm860x.h>
#include <linux/platform_data/mv_usb.h>
#include <linux/spi/spi.h>
#include <linux/delay.h>

#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include "addr-map.h"
#include "mfp-pxa910.h"
#include "pxa910.h"
#include "irqs.h"
#include "regs-usb.h"

#include "common.h"

#define TTCDKB_GPIO_EXT0(x)	(MMP_NR_BUILTIN_GPIO + ((x < 0) ? 0 :	\
				((x < 16) ? x : 15)))
#define TTCDKB_GPIO_EXT1(x)	(MMP_NR_BUILTIN_GPIO + 16 + ((x < 0) ? 0 : \
				((x < 16) ? x : 15)))

/*
 * 16 board interrupts -- MAX7312 GPIO expander
 * 16 board interrupts -- PCA9575 GPIO expander
 * 24 board interrupts -- 88PM860x PMIC
 */
#define TTCDKB_NR_IRQS		(MMP_NR_IRQS + 16 + 16 + 24)

static unsigned long ttc_dkb_pin_config[] __initdata = {
	/* UART2 */
	GPIO47_UART2_RXD,
	GPIO48_UART2_TXD,

	/* DFI */
	DF_IO0_ND_IO0,
	DF_IO1_ND_IO1,
	DF_IO2_ND_IO2,
	DF_IO3_ND_IO3,
	DF_IO4_ND_IO4,
	DF_IO5_ND_IO5,
	DF_IO6_ND_IO6,
	DF_IO7_ND_IO7,
	DF_IO8_ND_IO8,
	DF_IO9_ND_IO9,
	DF_IO10_ND_IO10,
	DF_IO11_ND_IO11,
	DF_IO12_ND_IO12,
	DF_IO13_ND_IO13,
	DF_IO14_ND_IO14,
	DF_IO15_ND_IO15,
	DF_nCS0_SM_nCS2_nCS0,
	DF_ALE_SM_WEn_ND_ALE,
	DF_CLE_SM_OEn_ND_CLE,
	DF_WEn_DF_WEn,
	DF_REn_DF_REn,
	DF_RDY0_DF_RDY0,
};

static struct pxa_gpio_platform_data pxa910_gpio_pdata = {
	.irq_base	= MMP_GPIO_TO_IRQ(0),
};

static struct mtd_partition ttc_dkb_onenand_partitions[] = {
	{
		.name		= "bootloader",
		.offset		= 0,
		.size		= SZ_1M,
		.mask_flags	= MTD_WRITEABLE,
	}, {
		.name		= "reserved",
		.offset		= MTDPART_OFS_APPEND,
		.size		= SZ_128K,
		.mask_flags	= MTD_WRITEABLE,
	}, {
		.name		= "reserved",
		.offset		= MTDPART_OFS_APPEND,
		.size		= SZ_8M,
		.mask_flags	= MTD_WRITEABLE,
	}, {
		.name		= "kernel",
		.offset		= MTDPART_OFS_APPEND,
		.size		= (SZ_2M + SZ_1M),
		.mask_flags	= 0,
	}, {
		.name		= "filesystem",
		.offset		= MTDPART_OFS_APPEND,
		.size		= SZ_32M + SZ_16M,
		.mask_flags	= 0,
	}
};

static struct onenand_platform_data ttc_dkb_onenand_info = {
	.parts		= ttc_dkb_onenand_partitions,
	.nr_parts	= ARRAY_SIZE(ttc_dkb_onenand_partitions),
};

static struct resource ttc_dkb_resource_onenand[] = {
	[0] = {
		.start	= SMC_CS0_PHYS_BASE,
		.end	= SMC_CS0_PHYS_BASE + SZ_1M,
		.flags	= IORESOURCE_MEM,
	},
};

static struct platform_device ttc_dkb_device_onenand = {
	.name		= "onenand-flash",
	.id		= -1,
	.resource	= ttc_dkb_resource_onenand,
	.num_resources	= ARRAY_SIZE(ttc_dkb_resource_onenand),
	.dev		= {
		.platform_data	= &ttc_dkb_onenand_info,
	},
};

static struct platform_device *ttc_dkb_devices[] = {
	&pxa910_device_gpio,
	&pxa910_device_rtc,
	&ttc_dkb_device_onenand,
};

static struct pca953x_platform_data max7312_data[] = {
	{
		.gpio_base	= TTCDKB_GPIO_EXT0(0),
		.irq_base	= MMP_NR_IRQS,
	},
};

static struct pm860x_platform_data ttc_dkb_pm8607_info = {
	.irq_base       = IRQ_BOARD_START,
};

static struct i2c_board_info ttc_dkb_i2c_info[] = {
	{
		.type           = "88PM860x",
		.addr           = 0x34,
		.platform_data  = &ttc_dkb_pm8607_info,
		.irq            = IRQ_PXA910_PMIC_INT,
	},
	{
		.type		= "max7312",
		.addr		= 0x23,
		.irq		= MMP_GPIO_TO_IRQ(80),
		.platform_data	= &max7312_data,
	},
};

#if IS_ENABLED(CONFIG_USB_SUPPORT)
#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)

static struct mv_usb_platform_data ttc_usb_pdata = {
	.vbus		= NULL,
	.mode		= MV_USB_MODE_OTG,
	.otg_force_a_bus_req = 1,
	.phy_init	= pxa_usb_phy_init,
	.phy_deinit	= pxa_usb_phy_deinit,
	.set_vbus	= NULL,
};
#endif
#endif

#if IS_ENABLED(CONFIG_MTD_NAND_PXA3xx)
static struct pxa3xx_nand_platform_data dkb_nand_info = {
	.enable_arbiter = 1,
	.num_cs = 1,
};
#endif

#if IS_ENABLED(CONFIG_MMP_DISP)
/* path config */
#define CFG_IOPADMODE(iopad)   (iopad)  /* 0x0 ~ 0xd */
#define SCLK_SOURCE_SELECT(x)  (x << 30) /* 0x0 ~ 0x3 */
/* link config */
#define CFG_DUMBMODE(mode)     (mode << 28) /* 0x0 ~ 0x6*/
static struct mmp_mach_path_config dkb_disp_config[] = {
	[0] = {
		.name = "mmp-parallel",
		.overlay_num = 2,
		.output_type = PATH_OUT_PARALLEL,
		.path_config = CFG_IOPADMODE(0x1)
			| SCLK_SOURCE_SELECT(0x1),
		.link_config = CFG_DUMBMODE(0x2),
	},
};

static struct mmp_mach_plat_info dkb_disp_info = {
	.name = "mmp-disp",
	.clk_name = "disp0",
	.path_num = 1,
	.paths = dkb_disp_config,
};

static struct mmp_buffer_driver_mach_info dkb_fb_info = {
	.name = "mmp-fb",
	.path_name = "mmp-parallel",
	.overlay_id = 0,
	.dmafetch_id = 1,
	.default_pixfmt = PIXFMT_RGB565,
};

static void dkb_tpo_panel_power(int on)
{
	int err;
	u32 spi_reset = mfp_to_gpio(MFP_PIN_GPIO106);

	if (on) {
		err = gpio_request(spi_reset, "TPO_LCD_SPI_RESET");
		if (err) {
			pr_err("failed to request GPIO for TPO LCD RESET\n");
			return;
		}
		gpio_direction_output(spi_reset, 0);
		udelay(100);
		gpio_set_value(spi_reset, 1);
		gpio_free(spi_reset);
	} else {
		err = gpio_request(spi_reset, "TPO_LCD_SPI_RESET");
		if (err) {
			pr_err("failed to request LCD RESET gpio\n");
			return;
		}
		gpio_set_value(spi_reset, 0);
		gpio_free(spi_reset);
	}
}

static struct mmp_mach_panel_info dkb_tpo_panel_info = {
	.name = "tpo-hvga",
	.plat_path_name = "mmp-parallel",
	.plat_set_onoff = dkb_tpo_panel_power,
};

static struct spi_board_info spi_board_info[] __initdata = {
	{
		.modalias       = "tpo-hvga",
		.platform_data  = &dkb_tpo_panel_info,
		.bus_num        = 5,
	}
};

static void __init add_disp(void)
{
	pxa_register_device(&pxa910_device_disp,
		&dkb_disp_info, sizeof(dkb_disp_info));
	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
	pxa_register_device(&pxa910_device_fb,
		&dkb_fb_info, sizeof(dkb_fb_info));
	pxa_register_device(&pxa910_device_panel,
		&dkb_tpo_panel_info, sizeof(dkb_tpo_panel_info));
}
#endif

static void __init ttc_dkb_init(void)
{
	mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config));

	/* on-chip devices */
	pxa910_add_uart(1);
#if IS_ENABLED(CONFIG_MTD_NAND_PXA3xx)
	pxa910_add_nand(&dkb_nand_info);
#endif

	/* off-chip devices */
	pxa910_add_twsi(0, NULL, ARRAY_AND_SIZE(ttc_dkb_i2c_info));
	platform_device_add_data(&pxa910_device_gpio, &pxa910_gpio_pdata,
				 sizeof(struct pxa_gpio_platform_data));
	platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices));

#if IS_ENABLED(CONFIG_USB_MV_UDC)
	pxa168_device_u2o.dev.platform_data = &ttc_usb_pdata;
	platform_device_register(&pxa168_device_u2o);
#endif

#if IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
	pxa168_device_u2oehci.dev.platform_data = &ttc_usb_pdata;
	platform_device_register(&pxa168_device_u2oehci);
#endif

#if IS_ENABLED(CONFIG_USB_MV_OTG)
	pxa168_device_u2ootg.dev.platform_data = &ttc_usb_pdata;
	platform_device_register(&pxa168_device_u2ootg);
#endif

#if IS_ENABLED(CONFIG_MMP_DISP)
	add_disp();
#endif
}

MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
	.map_io		= mmp_map_io,
	.nr_irqs	= TTCDKB_NR_IRQS,
	.init_irq       = pxa910_init_irq,
	.init_time	= pxa910_timer_init,
	.init_machine   = ttc_dkb_init,
	.restart	= mmp_restart,
MACHINE_END
Commit	Line	Data
01215e35 EM	1	/*
	2	* linux/arch/arm/mach-mmp/ttc_dkb.c
	3	*
	4	* Support for the Marvell PXA910-based TTC_DKB Development Platform.
	5	*
	6	* This program is free software; you can redistribute it and/or modify
	7	* it under the terms of the GNU General Public License version 2 as
	8	* publishhed by the Free Software Foundation.
	9	*/
	10
	11	#include <linux/init.h>
	12	#include <linux/kernel.h>
	13	#include <linux/platform_device.h>
d6587c34 HZ	14	#include <linux/mtd/mtd.h>
	15	#include <linux/mtd/partitions.h>
	16	#include <linux/mtd/onenand.h>
0bd86961	17	#include <linux/interrupt.h>
5877457a	18	#include <linux/platform_data/pca953x.h>
e04eb14f	19	#include <linux/gpio.h>
b8f649f1	20	#include <linux/gpio-pxa.h>
f4466946	21	#include <linux/mfd/88pm860x.h>
673eef98	22	#include <linux/platform_data/mv_usb.h>
74a014f4 ZZ	23	#include <linux/spi/spi.h>
74a014f4 ZZ	24	#include <linux/delay.h>
01215e35 EM	25
	26	#include <asm/mach-types.h>
	27	#include <asm/mach/arch.h>
d6587c34	28	#include <asm/mach/flash.h>
b501fd7b AB	29	#include "addr-map.h"
	30	#include "mfp-pxa910.h"
	31	#include "pxa910.h"
	32	#include "irqs.h"
	33	#include "regs-usb.h"
01215e35 EM	34
	35	#include "common.h"
	36
1a8d5fab	37	#define TTCDKB_GPIO_EXT0(x) (MMP_NR_BUILTIN_GPIO + ((x < 0) ? 0 : \
e04eb14f	38	((x < 16) ? x : 15)))
1a8d5fab	39	#define TTCDKB_GPIO_EXT1(x) (MMP_NR_BUILTIN_GPIO + 16 + ((x < 0) ? 0 : \
e04eb14f HZ	40	((x < 16) ? x : 15)))
	41
	42	/*
	43	* 16 board interrupts -- MAX7312 GPIO expander
	44	* 16 board interrupts -- PCA9575 GPIO expander
	45	* 24 board interrupts -- 88PM860x PMIC
	46	*/
8661fb92	47	#define TTCDKB_NR_IRQS (MMP_NR_IRQS + 16 + 16 + 24)
0bd86961	48
01215e35 EM	49	static unsigned long ttc_dkb_pin_config[] __initdata = {
	50	/* UART2 */
	51	GPIO47_UART2_RXD,
	52	GPIO48_UART2_TXD,
d6587c34 HZ	53
	54	/* DFI */
	55	DF_IO0_ND_IO0,
	56	DF_IO1_ND_IO1,
	57	DF_IO2_ND_IO2,
	58	DF_IO3_ND_IO3,
	59	DF_IO4_ND_IO4,
	60	DF_IO5_ND_IO5,
	61	DF_IO6_ND_IO6,
	62	DF_IO7_ND_IO7,
	63	DF_IO8_ND_IO8,
	64	DF_IO9_ND_IO9,
	65	DF_IO10_ND_IO10,
	66	DF_IO11_ND_IO11,
	67	DF_IO12_ND_IO12,
	68	DF_IO13_ND_IO13,
	69	DF_IO14_ND_IO14,
	70	DF_IO15_ND_IO15,
	71	DF_nCS0_SM_nCS2_nCS0,
	72	DF_ALE_SM_WEn_ND_ALE,
	73	DF_CLE_SM_OEn_ND_CLE,
	74	DF_WEn_DF_WEn,
	75	DF_REn_DF_REn,
	76	DF_RDY0_DF_RDY0,
	77	};
	78
b8f649f1 HZ	79	static struct pxa_gpio_platform_data pxa910_gpio_pdata = {
	80	.irq_base = MMP_GPIO_TO_IRQ(0),
	81	};
	82
d6587c34 HZ	83	static struct mtd_partition ttc_dkb_onenand_partitions[] = {
	84	{
	85	.name = "bootloader",
	86	.offset = 0,
	87	.size = SZ_1M,
	88	.mask_flags = MTD_WRITEABLE,
	89	}, {
	90	.name = "reserved",
	91	.offset = MTDPART_OFS_APPEND,
	92	.size = SZ_128K,
	93	.mask_flags = MTD_WRITEABLE,
	94	}, {
	95	.name = "reserved",
	96	.offset = MTDPART_OFS_APPEND,
	97	.size = SZ_8M,
	98	.mask_flags = MTD_WRITEABLE,
	99	}, {
	100	.name = "kernel",
	101	.offset = MTDPART_OFS_APPEND,
	102	.size = (SZ_2M + SZ_1M),
	103	.mask_flags = 0,
	104	}, {
	105	.name = "filesystem",
	106	.offset = MTDPART_OFS_APPEND,
3f8e2880	107	.size = SZ_32M + SZ_16M,
d6587c34 HZ	108	.mask_flags = 0,
	109	}
	110	};
	111
d6223871	112	static struct onenand_platform_data ttc_dkb_onenand_info = {
d6587c34 HZ	113	.parts = ttc_dkb_onenand_partitions,
	114	.nr_parts = ARRAY_SIZE(ttc_dkb_onenand_partitions),
	115	};
	116
	117	static struct resource ttc_dkb_resource_onenand[] = {
	118	[0] = {
	119	.start = SMC_CS0_PHYS_BASE,
	120	.end = SMC_CS0_PHYS_BASE + SZ_1M,
	121	.flags = IORESOURCE_MEM,
	122	},
	123	};
	124
	125	static struct platform_device ttc_dkb_device_onenand = {
	126	.name = "onenand-flash",
	127	.id = -1,
	128	.resource = ttc_dkb_resource_onenand,
	129	.num_resources = ARRAY_SIZE(ttc_dkb_resource_onenand),
	130	.dev = {
	131	.platform_data = &ttc_dkb_onenand_info,
	132	},
	133	};
	134
	135	static struct platform_device *ttc_dkb_devices[] = {
157d2644	136	&pxa910_device_gpio,
4128e275	137	&pxa910_device_rtc,
d6587c34	138	&ttc_dkb_device_onenand,
01215e35 EM	139	};
01215e35 EM	140
e04eb14f HZ	141	static struct pca953x_platform_data max7312_data[] = {
	142	{
	143	.gpio_base = TTCDKB_GPIO_EXT0(0),
8661fb92	144	.irq_base = MMP_NR_IRQS,
e04eb14f HZ	145	},
	146	};
	147
f4466946 CX	148	static struct pm860x_platform_data ttc_dkb_pm8607_info = {
	149	.irq_base = IRQ_BOARD_START,
	150	};
	151
e04eb14f	152	static struct i2c_board_info ttc_dkb_i2c_info[] = {
f4466946 CX	153	{
	154	.type = "88PM860x",
	155	.addr = 0x34,
	156	.platform_data = &ttc_dkb_pm8607_info,
	157	.irq = IRQ_PXA910_PMIC_INT,
	158	},
e04eb14f HZ	159	{
	160	.type = "max7312",
	161	.addr = 0x23,
1a8d5fab	162	.irq = MMP_GPIO_TO_IRQ(80),
e04eb14f HZ	163	.platform_data = &max7312_data,
	164	},
	165	};
	166
35240808 AB	167	#if IS_ENABLED(CONFIG_USB_SUPPORT)
35240808 AB	168	#if IS_ENABLED(CONFIG_USB_MV_UDC) \|\| IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
673eef98	169
673eef98	170	static struct mv_usb_platform_data ttc_usb_pdata = {
673eef98 NZ	171	.vbus = NULL,
	172	.mode = MV_USB_MODE_OTG,
	173	.otg_force_a_bus_req = 1,
	174	.phy_init = pxa_usb_phy_init,
	175	.phy_deinit = pxa_usb_phy_deinit,
	176	.set_vbus = NULL,
	177	};
	178	#endif
	179	#endif
	180
35240808	181	#if IS_ENABLED(CONFIG_MTD_NAND_PXA3xx)
0f74da3f LW	182	static struct pxa3xx_nand_platform_data dkb_nand_info = {
	183	.enable_arbiter = 1,
	184	.num_cs = 1,
	185	};
	186	#endif
	187
35240808	188	#if IS_ENABLED(CONFIG_MMP_DISP)
74a014f4 ZZ	189	/* path config */
	190	#define CFG_IOPADMODE(iopad) (iopad) /* 0x0 ~ 0xd */
	191	#define SCLK_SOURCE_SELECT(x) (x << 30) /* 0x0 ~ 0x3 */
	192	/* link config */
	193	#define CFG_DUMBMODE(mode) (mode << 28) /* 0x0 ~ 0x6*/
74a014f4 ZZ	194	static struct mmp_mach_path_config dkb_disp_config[] = {
	195	[0] = {
	196	.name = "mmp-parallel",
	197	.overlay_num = 2,
	198	.output_type = PATH_OUT_PARALLEL,
	199	.path_config = CFG_IOPADMODE(0x1)
	200	\| SCLK_SOURCE_SELECT(0x1),
7ebdc78a	201	.link_config = CFG_DUMBMODE(0x2),
74a014f4 ZZ	202	},
	203	};
	204
	205	static struct mmp_mach_plat_info dkb_disp_info = {
	206	.name = "mmp-disp",
	207	.clk_name = "disp0",
	208	.path_num = 1,
	209	.paths = dkb_disp_config,
	210	};
	211
	212	static struct mmp_buffer_driver_mach_info dkb_fb_info = {
	213	.name = "mmp-fb",
	214	.path_name = "mmp-parallel",
	215	.overlay_id = 0,
	216	.dmafetch_id = 1,
	217	.default_pixfmt = PIXFMT_RGB565,
	218	};
	219
	220	static void dkb_tpo_panel_power(int on)
	221	{
	222	int err;
	223	u32 spi_reset = mfp_to_gpio(MFP_PIN_GPIO106);
	224
	225	if (on) {
	226	err = gpio_request(spi_reset, "TPO_LCD_SPI_RESET");
	227	if (err) {
	228	pr_err("failed to request GPIO for TPO LCD RESET\n");
	229	return;
	230	}
	231	gpio_direction_output(spi_reset, 0);
	232	udelay(100);
	233	gpio_set_value(spi_reset, 1);
	234	gpio_free(spi_reset);
	235	} else {
	236	err = gpio_request(spi_reset, "TPO_LCD_SPI_RESET");
	237	if (err) {
	238	pr_err("failed to request LCD RESET gpio\n");
	239	return;
	240	}
	241	gpio_set_value(spi_reset, 0);
	242	gpio_free(spi_reset);
	243	}
	244	}
	245
	246	static struct mmp_mach_panel_info dkb_tpo_panel_info = {
	247	.name = "tpo-hvga",
	248	.plat_path_name = "mmp-parallel",
	249	.plat_set_onoff = dkb_tpo_panel_power,
	250	};
	251
	252	static struct spi_board_info spi_board_info[] __initdata = {
	253	{
	254	.modalias = "tpo-hvga",
	255	.platform_data = &dkb_tpo_panel_info,
	256	.bus_num = 5,
	257	}
	258	};
	259
	260	static void __init add_disp(void)
	261	{
	262	pxa_register_device(&pxa910_device_disp,
	263	&dkb_disp_info, sizeof(dkb_disp_info));
	264	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
	265	pxa_register_device(&pxa910_device_fb,
266	&dkb_fb_info, sizeof(dkb_fb_info));
267	pxa_register_device(&pxa910_device_panel,
268	&dkb_tpo_panel_info, sizeof(dkb_tpo_panel_info));
269	}
270	#endif
271
01215e35 EM	272	static void __init ttc_dkb_init(void)
	273	{
	274	mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config));
	275
	276	/* on-chip devices */
	277	pxa910_add_uart(1);
35240808	278	#if IS_ENABLED(CONFIG_MTD_NAND_PXA3xx)
0f74da3f LW	279	pxa910_add_nand(&dkb_nand_info);
0f74da3f LW	280	#endif
d6587c34 HZ	281
d6587c34 HZ	282	/* off-chip devices */
e04eb14f	283	pxa910_add_twsi(0, NULL, ARRAY_AND_SIZE(ttc_dkb_i2c_info));
b8f649f1 HZ	284	platform_device_add_data(&pxa910_device_gpio, &pxa910_gpio_pdata,
b8f649f1 HZ	285	sizeof(struct pxa_gpio_platform_data));
d6587c34	286	platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices));
673eef98	287
35240808	288	#if IS_ENABLED(CONFIG_USB_MV_UDC)
673eef98 NZ	289	pxa168_device_u2o.dev.platform_data = &ttc_usb_pdata;
	290	platform_device_register(&pxa168_device_u2o);
	291	#endif
	292
35240808	293	#if IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
673eef98 NZ	294	pxa168_device_u2oehci.dev.platform_data = &ttc_usb_pdata;
	295	platform_device_register(&pxa168_device_u2oehci);
	296	#endif
	297
35240808	298	#if IS_ENABLED(CONFIG_USB_MV_OTG)
673eef98 NZ	299	pxa168_device_u2ootg.dev.platform_data = &ttc_usb_pdata;
	300	platform_device_register(&pxa168_device_u2ootg);
	301	#endif
74a014f4	302
35240808	303	#if IS_ENABLED(CONFIG_MMP_DISP)
74a014f4 ZZ	304	add_disp();
74a014f4 ZZ	305	#endif
01215e35 EM	306	}
	307
	308	MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
8022887c	309	.map_io = mmp_map_io,
0bd86961	310	.nr_irqs = TTCDKB_NR_IRQS,
01215e35	311	.init_irq = pxa910_init_irq,
6bb27d73	312	.init_time = pxa910_timer_init,
01215e35	313	.init_machine = ttc_dkb_init,
9854a38e	314	.restart = mmp_restart,
01215e35	315	MACHINE_END