[ARM] mmp2: add support for board IRQs

[linux-2.6-block.git] / arch / arm / mach-mmp / mmp2.c

/*
 * linux/arch/arm/mach-mmp/mmp2.c
 *
 * code name MMP2
 *
 * Copyright (C) 2009 Marvell International Ltd.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>

#include <mach/addr-map.h>
#include <mach/regs-apbc.h>
#include <mach/regs-apmu.h>
#include <mach/cputype.h>
#include <mach/irqs.h>
#include <mach/mfp.h>
#include <mach/gpio.h>
#include <mach/devices.h>

#include "common.h"
#include "clock.h"

#define MFPR_VIRT_BASE	(APB_VIRT_BASE + 0x1e000)

#define APMASK(i)	(GPIO_REGS_VIRT + BANK_OFF(i) + 0x9c)

static struct mfp_addr_map mmp2_addr_map[] __initdata = {
	MFP_ADDR(PMIC_INT, 0x2c4),

	MFP_ADDR_END,
};

static void __init mmp2_init_gpio(void)
{
	int i;

	/* enable GPIO clock */
	__raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_MMP2_GPIO);

	/* unmask GPIO edge detection for all 6 banks -- APMASKx */
	for (i = 0; i < 6; i++)
		__raw_writel(0xffffffff, APMASK(i));

	pxa_init_gpio(IRQ_MMP2_GPIO, 0, 167, NULL);
}

void __init mmp2_init_irq(void)
{
	mmp2_init_icu();
	mmp2_init_gpio();
}

/* APB peripheral clocks */
static APBC_CLK(uart1, MMP2_UART1, 1, 26000000);
static APBC_CLK(uart2, MMP2_UART2, 1, 26000000);
static APBC_CLK(uart3, MMP2_UART3, 1, 26000000);
static APBC_CLK(uart4, MMP2_UART4, 1, 26000000);
static APBC_CLK(twsi1, MMP2_TWSI1, 0, 26000000);
static APBC_CLK(twsi2, MMP2_TWSI2, 0, 26000000);
static APBC_CLK(twsi3, MMP2_TWSI3, 0, 26000000);
static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000);
static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000);
static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000);
static APBC_CLK(rtc, MMP2_RTC, 0, 32768);

static APMU_CLK(nand, NAND, 0xbf, 100000000);

static struct clk_lookup mmp2_clkregs[] = {
	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
	INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
	INIT_CLKREG(&clk_uart4, "pxa2xx-uart.3", NULL),
	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.0", NULL),
	INIT_CLKREG(&clk_twsi2, "pxa2xx-i2c.1", NULL),
	INIT_CLKREG(&clk_twsi3, "pxa2xx-i2c.2", NULL),
	INIT_CLKREG(&clk_twsi4, "pxa2xx-i2c.3", NULL),
	INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL),
	INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL),
	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
};

static int __init mmp2_init(void)
{
	if (cpu_is_mmp2()) {
		mfp_init_base(MFPR_VIRT_BASE);
		mfp_init_addr(mmp2_addr_map);
		clks_register(ARRAY_AND_SIZE(mmp2_clkregs));
	}

	return 0;
}
postcore_initcall(mmp2_init);

/* on-chip devices */
MMP2_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4030000, 0x30, 4, 5);
MMP2_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4017000, 0x30, 20, 21);
MMP2_DEVICE(uart3, "pxa2xx-uart", 2, UART3, 0xd4018000, 0x30, 22, 23);
MMP2_DEVICE(uart4, "pxa2xx-uart", 3, UART4, 0xd4016000, 0x30, 18, 19);
MMP2_DEVICE(twsi1, "pxa2xx-i2c", 0, TWSI1, 0xd4011000, 0x70);
MMP2_DEVICE(twsi2, "pxa2xx-i2c", 1, TWSI2, 0xd4031000, 0x70);
MMP2_DEVICE(twsi3, "pxa2xx-i2c", 2, TWSI3, 0xd4032000, 0x70);
MMP2_DEVICE(twsi4, "pxa2xx-i2c", 3, TWSI4, 0xd4033000, 0x70);
MMP2_DEVICE(twsi5, "pxa2xx-i2c", 4, TWSI5, 0xd4033800, 0x70);
MMP2_DEVICE(twsi6, "pxa2xx-i2c", 5, TWSI6, 0xd4034000, 0x70);
MMP2_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x100, 28, 29);