Commit | Line | Data |
---|---|---|
c680b77e LB |
1 | /* |
2 | * arch/arm/mach-iop32x/iq31244.c | |
3 | * | |
4 | * Board support code for the Intel EP80219 and IQ31244 platforms. | |
5 | * | |
6 | * Author: Rory Bolt <rorybolt@pacbell.net> | |
7 | * Copyright (C) 2002 Rory Bolt | |
8 | * Copyright 2003 (c) MontaVista, Software, Inc. | |
9 | * Copyright (C) 2004 Intel Corp. | |
10 | * | |
11 | * This program is free software; you can redistribute it and/or modify it | |
12 | * under the terms of the GNU General Public License as published by the | |
13 | * Free Software Foundation; either version 2 of the License, or (at your | |
14 | * option) any later version. | |
15 | */ | |
16 | ||
17 | #include <linux/mm.h> | |
18 | #include <linux/init.h> | |
19 | #include <linux/delay.h> | |
20 | #include <linux/kernel.h> | |
21 | #include <linux/pci.h> | |
22 | #include <linux/pm.h> | |
23 | #include <linux/string.h> | |
24 | #include <linux/slab.h> | |
25 | #include <linux/serial_core.h> | |
26 | #include <linux/serial_8250.h> | |
27 | #include <linux/mtd/physmap.h> | |
28 | #include <linux/platform_device.h> | |
a09e64fb | 29 | #include <mach/hardware.h> |
c680b77e LB |
30 | #include <asm/io.h> |
31 | #include <asm/irq.h> | |
32 | #include <asm/mach/arch.h> | |
33 | #include <asm/mach/map.h> | |
34 | #include <asm/mach/pci.h> | |
35 | #include <asm/mach/time.h> | |
36 | #include <asm/mach-types.h> | |
37 | #include <asm/page.h> | |
38 | #include <asm/pgtable.h> | |
a09e64fb | 39 | #include <mach/time.h> |
c680b77e LB |
40 | |
41 | /* | |
094f1275 DW |
42 | * Until March of 2007 iq31244 platforms and ep80219 platforms shared the |
43 | * same machine id, and the processor type was used to select board type. | |
44 | * However this assumption breaks for an iq80219 board which is an iop219 | |
45 | * processor on an iq31244 board. The force_ep80219 flag has been added | |
46 | * for old boot loaders using the iq31244 machine id for an ep80219 platform. | |
c680b77e | 47 | */ |
094f1275 DW |
48 | static int force_ep80219; |
49 | ||
c680b77e LB |
50 | static int is_80219(void) |
51 | { | |
52 | extern int processor_id; | |
53 | return !!((processor_id & 0xffffffe0) == 0x69052e20); | |
54 | } | |
55 | ||
094f1275 DW |
56 | static int is_ep80219(void) |
57 | { | |
58 | if (machine_is_ep80219() || force_ep80219) | |
59 | return 1; | |
60 | else | |
61 | return 0; | |
62 | } | |
63 | ||
c680b77e LB |
64 | |
65 | /* | |
66 | * EP80219/IQ31244 timer tick configuration. | |
67 | */ | |
68 | static void __init iq31244_timer_init(void) | |
69 | { | |
094f1275 | 70 | if (is_ep80219()) { |
c680b77e | 71 | /* 33.333 MHz crystal. */ |
3668b45d | 72 | iop_init_time(200000000); |
c680b77e LB |
73 | } else { |
74 | /* 33.000 MHz crystal. */ | |
3668b45d | 75 | iop_init_time(198000000); |
c680b77e LB |
76 | } |
77 | } | |
78 | ||
79 | static struct sys_timer iq31244_timer = { | |
80 | .init = iq31244_timer_init, | |
3668b45d | 81 | .offset = iop_gettimeoffset, |
c680b77e LB |
82 | }; |
83 | ||
84 | ||
85 | /* | |
86 | * IQ31244 I/O. | |
87 | */ | |
88 | static struct map_desc iq31244_io_desc[] __initdata = { | |
89 | { /* on-board devices */ | |
90 | .virtual = IQ31244_UART, | |
91 | .pfn = __phys_to_pfn(IQ31244_UART), | |
92 | .length = 0x00100000, | |
93 | .type = MT_DEVICE, | |
94 | }, | |
95 | }; | |
96 | ||
97 | void __init iq31244_map_io(void) | |
98 | { | |
99 | iop3xx_map_io(); | |
100 | iotable_init(iq31244_io_desc, ARRAY_SIZE(iq31244_io_desc)); | |
101 | } | |
102 | ||
103 | ||
104 | /* | |
105 | * EP80219/IQ31244 PCI. | |
106 | */ | |
d73d8011 | 107 | static int __init |
c680b77e LB |
108 | ep80219_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) |
109 | { | |
110 | int irq; | |
111 | ||
112 | if (slot == 0) { | |
113 | /* CFlash */ | |
c852ac80 | 114 | irq = IRQ_IOP32X_XINT1; |
c680b77e LB |
115 | } else if (slot == 1) { |
116 | /* 82551 Pro 100 */ | |
c852ac80 | 117 | irq = IRQ_IOP32X_XINT0; |
c680b77e LB |
118 | } else if (slot == 2) { |
119 | /* PCI-X Slot */ | |
c852ac80 | 120 | irq = IRQ_IOP32X_XINT3; |
c680b77e LB |
121 | } else if (slot == 3) { |
122 | /* SATA */ | |
c852ac80 | 123 | irq = IRQ_IOP32X_XINT2; |
c680b77e LB |
124 | } else { |
125 | printk(KERN_ERR "ep80219_pci_map_irq() called for unknown " | |
126 | "device PCI:%d:%d:%d\n", dev->bus->number, | |
127 | PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); | |
128 | irq = -1; | |
129 | } | |
130 | ||
131 | return irq; | |
132 | } | |
133 | ||
134 | static struct hw_pci ep80219_pci __initdata = { | |
135 | .swizzle = pci_std_swizzle, | |
136 | .nr_controllers = 1, | |
137 | .setup = iop3xx_pci_setup, | |
138 | .preinit = iop3xx_pci_preinit, | |
139 | .scan = iop3xx_pci_scan_bus, | |
140 | .map_irq = ep80219_pci_map_irq, | |
141 | }; | |
142 | ||
d73d8011 | 143 | static int __init |
c680b77e LB |
144 | iq31244_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) |
145 | { | |
146 | int irq; | |
147 | ||
148 | if (slot == 0) { | |
149 | /* CFlash */ | |
c852ac80 | 150 | irq = IRQ_IOP32X_XINT1; |
c680b77e LB |
151 | } else if (slot == 1) { |
152 | /* SATA */ | |
c852ac80 | 153 | irq = IRQ_IOP32X_XINT2; |
c680b77e LB |
154 | } else if (slot == 2) { |
155 | /* PCI-X Slot */ | |
c852ac80 | 156 | irq = IRQ_IOP32X_XINT3; |
c680b77e LB |
157 | } else if (slot == 3) { |
158 | /* 82546 GigE */ | |
c852ac80 | 159 | irq = IRQ_IOP32X_XINT0; |
c680b77e | 160 | } else { |
c852ac80 | 161 | printk(KERN_ERR "iq31244_pci_map_irq called for unknown " |
c680b77e LB |
162 | "device PCI:%d:%d:%d\n", dev->bus->number, |
163 | PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); | |
164 | irq = -1; | |
165 | } | |
166 | ||
167 | return irq; | |
168 | } | |
169 | ||
170 | static struct hw_pci iq31244_pci __initdata = { | |
171 | .swizzle = pci_std_swizzle, | |
172 | .nr_controllers = 1, | |
173 | .setup = iop3xx_pci_setup, | |
174 | .preinit = iop3xx_pci_preinit, | |
175 | .scan = iop3xx_pci_scan_bus, | |
176 | .map_irq = iq31244_pci_map_irq, | |
177 | }; | |
178 | ||
179 | static int __init iq31244_pci_init(void) | |
180 | { | |
c34002c1 DW |
181 | if (is_ep80219()) |
182 | pci_common_init(&ep80219_pci); | |
183 | else if (machine_is_iq31244()) { | |
c680b77e | 184 | if (is_80219()) { |
094f1275 DW |
185 | printk("note: iq31244 board type has been selected\n"); |
186 | printk("note: to select ep80219 operation:\n"); | |
187 | printk("\t1/ specify \"force_ep80219\" on the kernel" | |
188 | " command line\n"); | |
189 | printk("\t2/ update boot loader to pass" | |
190 | " the ep80219 id: %d\n", MACH_TYPE_EP80219); | |
c680b77e | 191 | } |
c34002c1 | 192 | pci_common_init(&iq31244_pci); |
c680b77e LB |
193 | } |
194 | ||
195 | return 0; | |
196 | } | |
197 | ||
198 | subsys_initcall(iq31244_pci_init); | |
199 | ||
200 | ||
201 | /* | |
202 | * IQ31244 machine initialisation. | |
203 | */ | |
204 | static struct physmap_flash_data iq31244_flash_data = { | |
205 | .width = 2, | |
206 | }; | |
207 | ||
208 | static struct resource iq31244_flash_resource = { | |
209 | .start = 0xf0000000, | |
210 | .end = 0xf07fffff, | |
211 | .flags = IORESOURCE_MEM, | |
212 | }; | |
213 | ||
214 | static struct platform_device iq31244_flash_device = { | |
215 | .name = "physmap-flash", | |
216 | .id = 0, | |
217 | .dev = { | |
218 | .platform_data = &iq31244_flash_data, | |
219 | }, | |
220 | .num_resources = 1, | |
221 | .resource = &iq31244_flash_resource, | |
222 | }; | |
223 | ||
224 | static struct plat_serial8250_port iq31244_serial_port[] = { | |
225 | { | |
226 | .mapbase = IQ31244_UART, | |
227 | .membase = (char *)IQ31244_UART, | |
c852ac80 | 228 | .irq = IRQ_IOP32X_XINT1, |
c680b77e LB |
229 | .flags = UPF_SKIP_TEST, |
230 | .iotype = UPIO_MEM, | |
231 | .regshift = 0, | |
232 | .uartclk = 1843200, | |
233 | }, | |
234 | { }, | |
235 | }; | |
236 | ||
237 | static struct resource iq31244_uart_resource = { | |
238 | .start = IQ31244_UART, | |
239 | .end = IQ31244_UART + 7, | |
240 | .flags = IORESOURCE_MEM, | |
241 | }; | |
242 | ||
243 | static struct platform_device iq31244_serial_device = { | |
244 | .name = "serial8250", | |
245 | .id = PLAT8250_DEV_PLATFORM, | |
246 | .dev = { | |
247 | .platform_data = iq31244_serial_port, | |
248 | }, | |
249 | .num_resources = 1, | |
250 | .resource = &iq31244_uart_resource, | |
251 | }; | |
252 | ||
253 | /* | |
254 | * This function will send a SHUTDOWN_COMPLETE message to the PIC | |
255 | * controller over I2C. We are not using the i2c subsystem since | |
256 | * we are going to power off and it may be removed | |
257 | */ | |
258 | void ep80219_power_off(void) | |
259 | { | |
260 | /* | |
261 | * Send the Address byte w/ the start condition | |
262 | */ | |
263 | *IOP3XX_IDBR1 = 0x60; | |
264 | *IOP3XX_ICR1 = 0xE9; | |
265 | mdelay(1); | |
266 | ||
267 | /* | |
268 | * Send the START_MSG byte w/ no start or stop condition | |
269 | */ | |
270 | *IOP3XX_IDBR1 = 0x0F; | |
271 | *IOP3XX_ICR1 = 0xE8; | |
272 | mdelay(1); | |
273 | ||
274 | /* | |
275 | * Send the SHUTDOWN_COMPLETE Message ID byte w/ no start or | |
276 | * stop condition | |
277 | */ | |
278 | *IOP3XX_IDBR1 = 0x03; | |
279 | *IOP3XX_ICR1 = 0xE8; | |
280 | mdelay(1); | |
281 | ||
282 | /* | |
283 | * Send an ignored byte w/ stop condition | |
284 | */ | |
285 | *IOP3XX_IDBR1 = 0x00; | |
286 | *IOP3XX_ICR1 = 0xEA; | |
287 | ||
288 | while (1) | |
289 | ; | |
290 | } | |
291 | ||
292 | static void __init iq31244_init_machine(void) | |
293 | { | |
294 | platform_device_register(&iop3xx_i2c0_device); | |
295 | platform_device_register(&iop3xx_i2c1_device); | |
296 | platform_device_register(&iq31244_flash_device); | |
297 | platform_device_register(&iq31244_serial_device); | |
2492c845 DW |
298 | platform_device_register(&iop3xx_dma_0_channel); |
299 | platform_device_register(&iop3xx_dma_1_channel); | |
c680b77e | 300 | |
094f1275 | 301 | if (is_ep80219()) |
c680b77e | 302 | pm_power_off = ep80219_power_off; |
2492c845 DW |
303 | |
304 | if (!is_80219()) | |
305 | platform_device_register(&iop3xx_aau_channel); | |
c680b77e LB |
306 | } |
307 | ||
094f1275 DW |
308 | static int __init force_ep80219_setup(char *str) |
309 | { | |
310 | force_ep80219 = 1; | |
311 | return 1; | |
312 | } | |
313 | ||
314 | __setup("force_ep80219", force_ep80219_setup); | |
315 | ||
c680b77e LB |
316 | MACHINE_START(IQ31244, "Intel IQ31244") |
317 | /* Maintainer: Intel Corp. */ | |
318 | .phys_io = IQ31244_UART, | |
319 | .io_pg_offst = ((IQ31244_UART) >> 18) & 0xfffc, | |
320 | .boot_params = 0xa0000100, | |
321 | .map_io = iq31244_map_io, | |
c852ac80 | 322 | .init_irq = iop32x_init_irq, |
c680b77e LB |
323 | .timer = &iq31244_timer, |
324 | .init_machine = iq31244_init_machine, | |
325 | MACHINE_END | |
094f1275 DW |
326 | |
327 | /* There should have been an ep80219 machine identifier from the beginning. | |
328 | * Boot roms older than March 2007 do not know the ep80219 machine id. Pass | |
329 | * "force_ep80219" on the kernel command line, otherwise iq31244 operation | |
330 | * will be selected. | |
331 | */ | |
332 | MACHINE_START(EP80219, "Intel EP80219") | |
333 | /* Maintainer: Intel Corp. */ | |
334 | .phys_io = IQ31244_UART, | |
335 | .io_pg_offst = ((IQ31244_UART) >> 18) & 0xfffc, | |
336 | .boot_params = 0xa0000100, | |
337 | .map_io = iq31244_map_io, | |
338 | .init_irq = iop32x_init_irq, | |
339 | .timer = &iq31244_timer, | |
340 | .init_machine = iq31244_init_machine, | |
341 | MACHINE_END |