[linux-2.6-block.git] / arch / arm / mach-imx / mach-vpr200.c

/*
 * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
 * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix
 * Copyright 2010 Creative Product Design
 *
 * Derived from mx35 3stack.
 * Original author: Fabio Estevam <fabio.estevam@freescale.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <linux/types.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/memory.h>
#include <linux/gpio.h>

#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>

#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/iomux-mx35.h>
#include <mach/irqs.h>

#include <linux/i2c.h>
#include <linux/i2c/at24.h>
#include <linux/mfd/mc13xxx.h>

#include "devices-imx35.h"

#define GPIO_LCDPWR	IMX_GPIO_NR(1, 2)
#define GPIO_PMIC_INT	IMX_GPIO_NR(2, 0)

#define GPIO_BUTTON1	IMX_GPIO_NR(1, 4)
#define GPIO_BUTTON2	IMX_GPIO_NR(1, 5)
#define GPIO_BUTTON3	IMX_GPIO_NR(1, 7)
#define GPIO_BUTTON4	IMX_GPIO_NR(1, 8)
#define GPIO_BUTTON5	IMX_GPIO_NR(1, 9)
#define GPIO_BUTTON6	IMX_GPIO_NR(1, 10)
#define GPIO_BUTTON7	IMX_GPIO_NR(1, 11)
#define GPIO_BUTTON8	IMX_GPIO_NR(1, 12)

static const struct fb_videomode fb_modedb[] = {
	{
		/* 800x480 @ 60 Hz */
		.name		= "PT0708048",
		.refresh	= 60,
		.xres		= 800,
		.yres		= 480,
		.pixclock	= KHZ2PICOS(33260),
		.left_margin	= 50,
		.right_margin	= 156,
		.upper_margin	= 10,
		.lower_margin	= 10,
		.hsync_len	= 1,	/* note: DE only display */
		.vsync_len	= 1,	/* note: DE only display */
		.sync		= FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH,
		.vmode		= FB_VMODE_NONINTERLACED,
		.flag		= 0,
	}, {
		/* 800x480 @ 60 Hz */
		.name		= "CTP-CLAA070LC0ACW",
		.refresh	= 60,
		.xres		= 800,
		.yres		= 480,
		.pixclock	= KHZ2PICOS(27000),
		.left_margin	= 50,
		.right_margin	= 50,	/* whole line should have 900 clocks */
		.upper_margin	= 10,
		.lower_margin	= 10,	/* whole frame should have 500 lines */
		.hsync_len	= 1,	/* note: DE only display */
		.vsync_len	= 1,	/* note: DE only display */
		.sync		= FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH,
		.vmode		= FB_VMODE_NONINTERLACED,
		.flag		= 0,
	}
};

static const struct ipu_platform_data mx3_ipu_data __initconst = {
	.irq_base = MXC_IPU_IRQ_START,
};

static struct mx3fb_platform_data mx3fb_pdata __initdata = {
	.name		= "PT0708048",
	.mode		= fb_modedb,
	.num_modes	= ARRAY_SIZE(fb_modedb),
};

static struct physmap_flash_data vpr200_flash_data = {
	.width  = 2,
};

static struct resource vpr200_flash_resource = {
	.start	= MX35_CS0_BASE_ADDR,
	.end	= MX35_CS0_BASE_ADDR + SZ_64M - 1,
	.flags	= IORESOURCE_MEM,
};

static struct platform_device vpr200_flash = {
	.name	= "physmap-flash",
	.id	= 0,
	.dev	= {
		.platform_data  = &vpr200_flash_data,
	},
	.resource = &vpr200_flash_resource,
	.num_resources = 1,
};

static const struct mxc_nand_platform_data
		vpr200_nand_board_info __initconst = {
	.width = 1,
	.hw_ecc = 1,
	.flash_bbt = 1,
};

#define VPR_KEY_DEBOUNCE	500
static struct gpio_keys_button vpr200_gpio_keys_table[] = {
	{KEY_F2, GPIO_BUTTON1, 1, "vpr-keys: F2", 0, VPR_KEY_DEBOUNCE},
	{KEY_F3, GPIO_BUTTON2, 1, "vpr-keys: F3", 0, VPR_KEY_DEBOUNCE},
	{KEY_F4, GPIO_BUTTON3, 1, "vpr-keys: F4", 0, VPR_KEY_DEBOUNCE},
	{KEY_F5, GPIO_BUTTON4, 1, "vpr-keys: F5", 0, VPR_KEY_DEBOUNCE},
	{KEY_F6, GPIO_BUTTON5, 1, "vpr-keys: F6", 0, VPR_KEY_DEBOUNCE},
	{KEY_F7, GPIO_BUTTON6, 1, "vpr-keys: F7", 0, VPR_KEY_DEBOUNCE},
	{KEY_F8, GPIO_BUTTON7, 1, "vpr-keys: F8", 1, VPR_KEY_DEBOUNCE},
	{KEY_F9, GPIO_BUTTON8, 1, "vpr-keys: F9", 1, VPR_KEY_DEBOUNCE},
};

static const struct gpio_keys_platform_data
		vpr200_gpio_keys_data __initconst = {
	.buttons = vpr200_gpio_keys_table,
	.nbuttons = ARRAY_SIZE(vpr200_gpio_keys_table),
};

static struct mc13xxx_platform_data vpr200_pmic = {
	.flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN,
};

static const struct imxi2c_platform_data vpr200_i2c0_data __initconst = {
	.bitrate = 50000,
};

static struct at24_platform_data vpr200_eeprom = {
	.byte_len = 2048 / 8,
	.page_size = 1,
};

static struct i2c_board_info vpr200_i2c_devices[] = {
	{
		I2C_BOARD_INFO("at24", 0x50), /* E0=0, E1=0, E2=0 */
		.platform_data = &vpr200_eeprom,
	}, {
		I2C_BOARD_INFO("mc13892", 0x08),
		.platform_data = &vpr200_pmic,
		.irq = IMX_GPIO_TO_IRQ(GPIO_PMIC_INT),
	}
};

static iomux_v3_cfg_t vpr200_pads[] = {
	/* UART1 */
	MX35_PAD_TXD1__UART1_TXD_MUX,
	MX35_PAD_RXD1__UART1_RXD_MUX,
	/* UART3 */
	MX35_PAD_ATA_DATA10__UART3_RXD_MUX,
	MX35_PAD_ATA_DATA11__UART3_TXD_MUX,
	/* FEC */
	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
	MX35_PAD_FEC_COL__FEC_COL,
	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
	MX35_PAD_FEC_MDC__FEC_MDC,
	MX35_PAD_FEC_MDIO__FEC_MDIO,
	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
	MX35_PAD_FEC_CRS__FEC_CRS,
	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
	/* Display */
	MX35_PAD_LD0__IPU_DISPB_DAT_0,
	MX35_PAD_LD1__IPU_DISPB_DAT_1,
	MX35_PAD_LD2__IPU_DISPB_DAT_2,
	MX35_PAD_LD3__IPU_DISPB_DAT_3,
	MX35_PAD_LD4__IPU_DISPB_DAT_4,
	MX35_PAD_LD5__IPU_DISPB_DAT_5,
	MX35_PAD_LD6__IPU_DISPB_DAT_6,
	MX35_PAD_LD7__IPU_DISPB_DAT_7,
	MX35_PAD_LD8__IPU_DISPB_DAT_8,
	MX35_PAD_LD9__IPU_DISPB_DAT_9,
	MX35_PAD_LD10__IPU_DISPB_DAT_10,
	MX35_PAD_LD11__IPU_DISPB_DAT_11,
	MX35_PAD_LD12__IPU_DISPB_DAT_12,
	MX35_PAD_LD13__IPU_DISPB_DAT_13,
	MX35_PAD_LD14__IPU_DISPB_DAT_14,
	MX35_PAD_LD15__IPU_DISPB_DAT_15,
	MX35_PAD_LD16__IPU_DISPB_DAT_16,
	MX35_PAD_LD17__IPU_DISPB_DAT_17,
	MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
	MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
	MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
	/* LCD Enable */
	MX35_PAD_D3_VSYNC__GPIO1_2,
	/* USBOTG */
	MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
	MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
	/* SDCARD */
	MX35_PAD_SD1_CMD__ESDHC1_CMD,
	MX35_PAD_SD1_CLK__ESDHC1_CLK,
	MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
	/* PMIC */
	MX35_PAD_GPIO2_0__GPIO2_0,
	/* GPIO keys */
	MX35_PAD_SCKR__GPIO1_4,
	MX35_PAD_COMPARE__GPIO1_5,
	MX35_PAD_SCKT__GPIO1_7,
	MX35_PAD_FST__GPIO1_8,
	MX35_PAD_HCKT__GPIO1_9,
	MX35_PAD_TX5_RX0__GPIO1_10,
	MX35_PAD_TX4_RX1__GPIO1_11,
	MX35_PAD_TX3_RX2__GPIO1_12,
};

/* USB Device config */
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
	.operating_mode	= FSL_USB2_DR_DEVICE,
	.phy_mode	= FSL_USB2_PHY_UTMI,
	.workaround	= FLS_USB2_WORKAROUND_ENGCM09152,
};

static int vpr200_usbh_init(struct platform_device *pdev)
{
	return mx35_initialize_usb_hw(pdev->id,
			MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY);
}

/* USB HOST config */
static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
	.init = vpr200_usbh_init,
	.portsc = MXC_EHCI_MODE_SERIAL,
};

static struct platform_device *devices[] __initdata = {
	&vpr200_flash,
};

/*
 * Board specific initialization.
 */
static void __init vpr200_board_init(void)
{
	imx35_soc_init();

	mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads));

	imx35_add_fec(NULL);
	imx35_add_imx2_wdt(NULL);
	imx_add_gpio_keys(&vpr200_gpio_keys_data);

	platform_add_devices(devices, ARRAY_SIZE(devices));

	if (0 != gpio_request(GPIO_LCDPWR, "LCDPWR"))
		printk(KERN_WARNING "vpr200: Couldn't get LCDPWR gpio\n");
	else
		gpio_direction_output(GPIO_LCDPWR, 0);

	if (0 != gpio_request(GPIO_PMIC_INT, "PMIC_INT"))
		printk(KERN_WARNING "vpr200: Couldn't get PMIC_INT gpio\n");
	else
		gpio_direction_input(GPIO_PMIC_INT);

	imx35_add_imx_uart0(NULL);
	imx35_add_imx_uart2(NULL);

	imx35_add_ipu_core(&mx3_ipu_data);
	imx35_add_mx3_sdc_fb(&mx3fb_pdata);

	imx35_add_fsl_usb2_udc(&otg_device_pdata);
	imx35_add_mxc_ehci_hs(&usb_host_pdata);

	imx35_add_mxc_nand(&vpr200_nand_board_info);
	imx35_add_sdhci_esdhc_imx(0, NULL);

	i2c_register_board_info(0, vpr200_i2c_devices,
			ARRAY_SIZE(vpr200_i2c_devices));

	imx35_add_imx_i2c0(&vpr200_i2c0_data);
}

static void __init vpr200_timer_init(void)
{
	mx35_clocks_init();
}

static struct sys_timer vpr200_timer = {
	.init	= vpr200_timer_init,
};

MACHINE_START(VPR200, "VPR200")
	/* Maintainer: Creative Product Design */
	.map_io = mx35_map_io,
	.init_early = imx35_init_early,
	.init_irq = mx35_init_irq,
	.handle_irq = imx35_handle_irq,
	.timer = &vpr200_timer,
	.init_machine = vpr200_board_init,
	.restart	= mxc_restart,
MACHINE_END
Commit	Line	Data
00c89c1d MR	1	/*
	2	* Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
	3	* Copyright (C) 2009 Marc Kleine-Budde, Pengutronix
	4	* Copyright 2010 Creative Product Design
	5	*
	6	* Derived from mx35 3stack.
	7	* Original author: Fabio Estevam <fabio.estevam@freescale.com>
	8	*
	9	* This program is free software; you can redistribute it and/or modify
	10	* it under the terms of the GNU General Public License as published by
	11	* the Free Software Foundation; either version 2 of the License, or
	12	* (at your option) any later version.
	13	*
	14	* This program is distributed in the hope that it will be useful,
	15	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	16	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	17	* GNU General Public License for more details.
	18	*/
	19
	20	#include <linux/types.h>
	21	#include <linux/init.h>
	22	#include <linux/platform_device.h>
	23	#include <linux/mtd/physmap.h>
	24	#include <linux/memory.h>
	25	#include <linux/gpio.h>
	26
	27	#include <asm/mach-types.h>
	28	#include <asm/mach/arch.h>
	29	#include <asm/mach/time.h>
	30
	31	#include <mach/hardware.h>
	32	#include <mach/common.h>
	33	#include <mach/iomux-mx35.h>
	34	#include <mach/irqs.h>
00c89c1d MR	35
	36	#include <linux/i2c.h>
	37	#include <linux/i2c/at24.h>
	38	#include <linux/mfd/mc13xxx.h>
00c89c1d MR	39
00c89c1d MR	40	#include "devices-imx35.h"
00c89c1d MR	41
	42	#define GPIO_LCDPWR IMX_GPIO_NR(1, 2)
	43	#define GPIO_PMIC_INT IMX_GPIO_NR(2, 0)
	44
	45	#define GPIO_BUTTON1 IMX_GPIO_NR(1, 4)
	46	#define GPIO_BUTTON2 IMX_GPIO_NR(1, 5)
	47	#define GPIO_BUTTON3 IMX_GPIO_NR(1, 7)
	48	#define GPIO_BUTTON4 IMX_GPIO_NR(1, 8)
	49	#define GPIO_BUTTON5 IMX_GPIO_NR(1, 9)
	50	#define GPIO_BUTTON6 IMX_GPIO_NR(1, 10)
	51	#define GPIO_BUTTON7 IMX_GPIO_NR(1, 11)
	52	#define GPIO_BUTTON8 IMX_GPIO_NR(1, 12)
	53
	54	static const struct fb_videomode fb_modedb[] = {
	55	{
	56	/* 800x480 @ 60 Hz */
	57	.name = "PT0708048",
	58	.refresh = 60,
	59	.xres = 800,
	60	.yres = 480,
	61	.pixclock = KHZ2PICOS(33260),
	62	.left_margin = 50,
	63	.right_margin = 156,
	64	.upper_margin = 10,
	65	.lower_margin = 10,
	66	.hsync_len = 1, /* note: DE only display */
	67	.vsync_len = 1, /* note: DE only display */
	68	.sync = FB_SYNC_CLK_IDLE_EN \| FB_SYNC_OE_ACT_HIGH,
	69	.vmode = FB_VMODE_NONINTERLACED,
	70	.flag = 0,
	71	}, {
	72	/* 800x480 @ 60 Hz */
	73	.name = "CTP-CLAA070LC0ACW",
	74	.refresh = 60,
	75	.xres = 800,
	76	.yres = 480,
	77	.pixclock = KHZ2PICOS(27000),
	78	.left_margin = 50,
	79	.right_margin = 50, /* whole line should have 900 clocks */
	80	.upper_margin = 10,
	81	.lower_margin = 10, /* whole frame should have 500 lines */
	82	.hsync_len = 1, /* note: DE only display */
	83	.vsync_len = 1, /* note: DE only display */
	84	.sync = FB_SYNC_CLK_IDLE_EN \| FB_SYNC_OE_ACT_HIGH,
	85	.vmode = FB_VMODE_NONINTERLACED,
	86	.flag = 0,
	87	}
	88	};
	89
afa77ef3	90	static const struct ipu_platform_data mx3_ipu_data __initconst = {
00c89c1d MR	91	.irq_base = MXC_IPU_IRQ_START,
	92	};
	93
afa77ef3	94	static struct mx3fb_platform_data mx3fb_pdata __initdata = {
00c89c1d MR	95	.name = "PT0708048",
	96	.mode = fb_modedb,
	97	.num_modes = ARRAY_SIZE(fb_modedb),
	98	};
	99
	100	static struct physmap_flash_data vpr200_flash_data = {
	101	.width = 2,
	102	};
	103
	104	static struct resource vpr200_flash_resource = {
	105	.start = MX35_CS0_BASE_ADDR,
	106	.end = MX35_CS0_BASE_ADDR + SZ_64M - 1,
	107	.flags = IORESOURCE_MEM,
	108	};
	109
	110	static struct platform_device vpr200_flash = {
	111	.name = "physmap-flash",
	112	.id = 0,
	113	.dev = {
	114	.platform_data = &vpr200_flash_data,
	115	},
	116	.resource = &vpr200_flash_resource,
	117	.num_resources = 1,
	118	};
	119
	120	static const struct mxc_nand_platform_data
	121	vpr200_nand_board_info __initconst = {
	122	.width = 1,
	123	.hw_ecc = 1,
	124	.flash_bbt = 1,
	125	};
	126
	127	#define VPR_KEY_DEBOUNCE 500
	128	static struct gpio_keys_button vpr200_gpio_keys_table[] = {
	129	{KEY_F2, GPIO_BUTTON1, 1, "vpr-keys: F2", 0, VPR_KEY_DEBOUNCE},
	130	{KEY_F3, GPIO_BUTTON2, 1, "vpr-keys: F3", 0, VPR_KEY_DEBOUNCE},
	131	{KEY_F4, GPIO_BUTTON3, 1, "vpr-keys: F4", 0, VPR_KEY_DEBOUNCE},
	132	{KEY_F5, GPIO_BUTTON4, 1, "vpr-keys: F5", 0, VPR_KEY_DEBOUNCE},
	133	{KEY_F6, GPIO_BUTTON5, 1, "vpr-keys: F6", 0, VPR_KEY_DEBOUNCE},
	134	{KEY_F7, GPIO_BUTTON6, 1, "vpr-keys: F7", 0, VPR_KEY_DEBOUNCE},
	135	{KEY_F8, GPIO_BUTTON7, 1, "vpr-keys: F8", 1, VPR_KEY_DEBOUNCE},
	136	{KEY_F9, GPIO_BUTTON8, 1, "vpr-keys: F9", 1, VPR_KEY_DEBOUNCE},
	137	};
	138
5309498a UKK	139	static const struct gpio_keys_platform_data
5309498a UKK	140	vpr200_gpio_keys_data __initconst = {
00c89c1d MR	141	.buttons = vpr200_gpio_keys_table,
	142	.nbuttons = ARRAY_SIZE(vpr200_gpio_keys_table),
	143	};
	144
00c89c1d MR	145	static struct mc13xxx_platform_data vpr200_pmic = {
	146	.flags = MC13XXX_USE_ADC \| MC13XXX_USE_TOUCHSCREEN,
	147	};
	148
	149	static const struct imxi2c_platform_data vpr200_i2c0_data __initconst = {
	150	.bitrate = 50000,
	151	};
	152
	153	static struct at24_platform_data vpr200_eeprom = {
	154	.byte_len = 2048 / 8,
	155	.page_size = 1,
	156	};
	157
	158	static struct i2c_board_info vpr200_i2c_devices[] = {
	159	{
	160	I2C_BOARD_INFO("at24", 0x50), /* E0=0, E1=0, E2=0 */
	161	.platform_data = &vpr200_eeprom,
	162	}, {
	163	I2C_BOARD_INFO("mc13892", 0x08),
	164	.platform_data = &vpr200_pmic,
e309fb18	165	.irq = IMX_GPIO_TO_IRQ(GPIO_PMIC_INT),
00c89c1d MR	166	}
	167	};
	168
	169	static iomux_v3_cfg_t vpr200_pads[] = {
	170	/* UART1 */
	171	MX35_PAD_TXD1__UART1_TXD_MUX,
	172	MX35_PAD_RXD1__UART1_RXD_MUX,
	173	/* UART3 */
	174	MX35_PAD_ATA_DATA10__UART3_RXD_MUX,
	175	MX35_PAD_ATA_DATA11__UART3_TXD_MUX,
	176	/* FEC */
	177	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
	178	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
	179	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
	180	MX35_PAD_FEC_COL__FEC_COL,
	181	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
	182	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
	183	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
	184	MX35_PAD_FEC_MDC__FEC_MDC,
	185	MX35_PAD_FEC_MDIO__FEC_MDIO,
	186	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
	187	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
	188	MX35_PAD_FEC_CRS__FEC_CRS,
	189	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
	190	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
	191	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
	192	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
	193	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
	194	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
	195	/* Display */
	196	MX35_PAD_LD0__IPU_DISPB_DAT_0,
	197	MX35_PAD_LD1__IPU_DISPB_DAT_1,
	198	MX35_PAD_LD2__IPU_DISPB_DAT_2,
	199	MX35_PAD_LD3__IPU_DISPB_DAT_3,
	200	MX35_PAD_LD4__IPU_DISPB_DAT_4,
	201	MX35_PAD_LD5__IPU_DISPB_DAT_5,
	202	MX35_PAD_LD6__IPU_DISPB_DAT_6,
	203	MX35_PAD_LD7__IPU_DISPB_DAT_7,
	204	MX35_PAD_LD8__IPU_DISPB_DAT_8,
	205	MX35_PAD_LD9__IPU_DISPB_DAT_9,
	206	MX35_PAD_LD10__IPU_DISPB_DAT_10,
	207	MX35_PAD_LD11__IPU_DISPB_DAT_11,
	208	MX35_PAD_LD12__IPU_DISPB_DAT_12,
	209	MX35_PAD_LD13__IPU_DISPB_DAT_13,
	210	MX35_PAD_LD14__IPU_DISPB_DAT_14,
	211	MX35_PAD_LD15__IPU_DISPB_DAT_15,
	212	MX35_PAD_LD16__IPU_DISPB_DAT_16,
	213	MX35_PAD_LD17__IPU_DISPB_DAT_17,
	214	MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
	215	MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
	216	MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
	217	/* LCD Enable */
	218	MX35_PAD_D3_VSYNC__GPIO1_2,
	219	/* USBOTG */
	220	MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
	221	MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
	222	/* SDCARD */
	223	MX35_PAD_SD1_CMD__ESDHC1_CMD,
	224	MX35_PAD_SD1_CLK__ESDHC1_CLK,
	225	MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
	226	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
	227	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
	228	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
	229	/* PMIC */
230	MX35_PAD_GPIO2_0__GPIO2_0,
231	/* GPIO keys */
232	MX35_PAD_SCKR__GPIO1_4,
233	MX35_PAD_COMPARE__GPIO1_5,
234	MX35_PAD_SCKT__GPIO1_7,
235	MX35_PAD_FST__GPIO1_8,
236	MX35_PAD_HCKT__GPIO1_9,
237	MX35_PAD_TX5_RX0__GPIO1_10,
238	MX35_PAD_TX4_RX1__GPIO1_11,
239	MX35_PAD_TX3_RX2__GPIO1_12,
240	};
241
242	/* USB Device config */
243	static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
244	.operating_mode = FSL_USB2_DR_DEVICE,
245	.phy_mode = FSL_USB2_PHY_UTMI,
246	.workaround = FLS_USB2_WORKAROUND_ENGCM09152,
247	};
248
32a90b6e UKK	249	static int vpr200_usbh_init(struct platform_device *pdev)
	250	{
	251	return mx35_initialize_usb_hw(pdev->id,
	252	MXC_EHCI_INTERFACE_SINGLE_UNI \| MXC_EHCI_INTERNAL_PHY);
	253	}
	254
00c89c1d MR	255	/* USB HOST config */
00c89c1d MR	256	static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
32a90b6e UKK	257	.init = vpr200_usbh_init,
32a90b6e UKK	258	.portsc = MXC_EHCI_MODE_SERIAL,
00c89c1d MR	259	};
	260
	261	static struct platform_device *devices[] __initdata = {
	262	&vpr200_flash,
00c89c1d MR	263	};
	264
	265	/*
	266	* Board specific initialization.
	267	*/
	268	static void __init vpr200_board_init(void)
	269	{
b78d8e59 SG	270	imx35_soc_init();
b78d8e59 SG	271
00c89c1d MR	272	mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads));
	273
	274	imx35_add_fec(NULL);
	275	imx35_add_imx2_wdt(NULL);
5309498a	276	imx_add_gpio_keys(&vpr200_gpio_keys_data);
00c89c1d MR	277
	278	platform_add_devices(devices, ARRAY_SIZE(devices));
	279
	280	if (0 != gpio_request(GPIO_LCDPWR, "LCDPWR"))
	281	printk(KERN_WARNING "vpr200: Couldn't get LCDPWR gpio\n");
	282	else
	283	gpio_direction_output(GPIO_LCDPWR, 0);
	284
	285	if (0 != gpio_request(GPIO_PMIC_INT, "PMIC_INT"))
	286	printk(KERN_WARNING "vpr200: Couldn't get PMIC_INT gpio\n");
	287	else
	288	gpio_direction_input(GPIO_PMIC_INT);
	289
	290	imx35_add_imx_uart0(NULL);
	291	imx35_add_imx_uart2(NULL);
	292
afa77ef3 UKK	293	imx35_add_ipu_core(&mx3_ipu_data);
afa77ef3 UKK	294	imx35_add_mx3_sdc_fb(&mx3fb_pdata);
00c89c1d MR	295
	296	imx35_add_fsl_usb2_udc(&otg_device_pdata);
	297	imx35_add_mxc_ehci_hs(&usb_host_pdata);
	298
	299	imx35_add_mxc_nand(&vpr200_nand_board_info);
	300	imx35_add_sdhci_esdhc_imx(0, NULL);
	301
	302	i2c_register_board_info(0, vpr200_i2c_devices,
	303	ARRAY_SIZE(vpr200_i2c_devices));
	304
	305	imx35_add_imx_i2c0(&vpr200_i2c0_data);
	306	}
	307
	308	static void __init vpr200_timer_init(void)
	309	{
	310	mx35_clocks_init();
	311	}
	312
7bf1c875	313	static struct sys_timer vpr200_timer = {
00c89c1d MR	314	.init = vpr200_timer_init,
	315	};
	316
	317	MACHINE_START(VPR200, "VPR200")
	318	/* Maintainer: Creative Product Design */
97976e22 UKK	319	.map_io = mx35_map_io,
	320	.init_early = imx35_init_early,
	321	.init_irq = mx35_init_irq,
ffa2ea3f	322	.handle_irq = imx35_handle_irq,
97976e22 UKK	323	.timer = &vpr200_timer,
97976e22 UKK	324	.init_machine = vpr200_board_init,
65ea7884	325	.restart = mxc_restart,
00c89c1d	326	MACHINE_END