[linux-2.6-block.git] / arch / arm / mach-imx / Kconfig

menuconfig ARCH_MXC
	bool "Freescale i.MX family"
	depends on ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M
	select ARCH_REQUIRE_GPIOLIB
	select ARM_CPU_SUSPEND if PM
	select CLKSRC_IMX_GPT
	select GENERIC_IRQ_CHIP
	select PINCTRL
	select PM_OPP if PM
	select SOC_BUS
	select SRAM
	help
	  Support for Freescale MXC/iMX-based family of processors

if ARCH_MXC

config MXC_TZIC
	bool

config MXC_AVIC
	bool

config MXC_DEBUG_BOARD
	bool "Enable MXC debug board(for 3-stack)"
	depends on MACH_MX27_3DS || MACH_MX31_3DS || MACH_MX35_3DS
	help
	  The debug board is an integral part of the MXC 3-stack(PDK)
	  platforms, it can be attached or removed from the peripheral
	  board. On debug board, several debug devices(ethernet, UART,
	  buttons, LEDs and JTAG) are implemented. Between the MCU and
	  these devices, a CPLD is added as a bridge which performs
	  data/address de-multiplexing and decode, signal level shift,
	  interrupt control and various board functions.

config HAVE_EPIT
	bool

config MXC_USE_EPIT
	bool "Use EPIT instead of GPT"
	depends on HAVE_EPIT
	help
	  Use EPIT as the system timer on systems that have it. Normally you
	  don't have a reason to do so as the EPIT has the same features and
	  uses the same clocks as the GPT. Anyway, on some systems the GPT
	  may be in use for other purposes.

config ARCH_HAS_RNGA
	bool

config HAVE_IMX_ANATOP
	bool

config HAVE_IMX_GPC
	bool
	select PM_GENERIC_DOMAINS if PM

config HAVE_IMX_MMDC
	bool

config HAVE_IMX_SRC
	def_bool y if SMP
	select ARCH_HAS_RESET_CONTROLLER

config IMX_HAVE_IOMUX_V1
	bool

config ARCH_MXC_IOMUX_V3
	bool

config SOC_IMX1
	bool
	select CPU_ARM920T
	select IMX_HAVE_IOMUX_V1
	select MXC_AVIC
	select PINCTRL_IMX1

config SOC_IMX21
	bool
	select CPU_ARM926T
	select IMX_HAVE_IOMUX_V1
	select MXC_AVIC

config SOC_IMX27
	bool
	select CPU_ARM926T
	select IMX_HAVE_IOMUX_V1
	select MXC_AVIC
	select PINCTRL_IMX27

config SOC_IMX31
	bool
	select CPU_V6
	select IMX_HAVE_PLATFORM_MXC_RNGA
	select MXC_AVIC
	select SMP_ON_UP if SMP

config SOC_IMX35
	bool
	select ARCH_MXC_IOMUX_V3
	select HAVE_EPIT
	select MXC_AVIC
	select PINCTRL_IMX35
	select SMP_ON_UP if SMP

if ARCH_MULTI_V4T

comment "MX1 platforms:"

config MACH_SCB9328
	bool "Synertronixx scb9328"
	select IMX_HAVE_PLATFORM_IMX_UART
	select SOC_IMX1
	help
	  Say Y here if you are using a Synertronixx scb9328 board

config MACH_APF9328
	bool "APF9328"
	select IMX_HAVE_PLATFORM_IMX_I2C
	select IMX_HAVE_PLATFORM_IMX_UART
	select SOC_IMX1
	help
	  Say Yes here if you are using the Armadeus APF9328 development board

config MACH_IMX1_DT
	bool "Support i.MX1 platforms from device tree"
	select SOC_IMX1
	help
	  Include support for Freescale i.MX1 based platforms
	  using the device tree for discovery.

endif

if ARCH_MULTI_V5

comment "MX21 platforms:"

config MACH_MX21ADS
	bool "MX21ADS platform"
	select IMX_HAVE_PLATFORM_IMX_FB
	select IMX_HAVE_PLATFORM_IMX_UART
	select IMX_HAVE_PLATFORM_MXC_MMC
	select IMX_HAVE_PLATFORM_MXC_NAND
	select SOC_IMX21
	help
	  Include support for MX21ADS platform. This includes specific
	  configurations for the board and its peripherals.

comment "MX27 platforms:"

config MACH_MX27ADS
	bool "MX27ADS platform"
	select IMX_HAVE_PLATFORM_IMX_FB
	select IMX_HAVE_PLATFORM_IMX_I2C
	select IMX_HAVE_PLATFORM_IMX_UART
	select IMX_HAVE_PLATFORM_MXC_MMC
	select IMX_HAVE_PLATFORM_MXC_NAND
	select IMX_HAVE_PLATFORM_MXC_W1
	select SOC_IMX27
	help
	  Include support for MX27ADS platform. This includes specific
	  configurations for the board and its peripherals.

config MACH_MX27_3DS
	bool "MX27PDK platform"
	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
	select IMX_HAVE_PLATFORM_IMX2_WDT
	select IMX_HAVE_PLATFORM_IMX_FB
	select IMX_HAVE_PLATFORM_IMX_I2C
	select IMX_HAVE_PLATFORM_IMX_KEYPAD
	select IMX_HAVE_PLATFORM_IMX_SSI
	select IMX_HAVE_PLATFORM_IMX_UART
	select IMX_HAVE_PLATFORM_MX2_CAMERA
	select IMX_HAVE_PLATFORM_MXC_EHCI
	select IMX_HAVE_PLATFORM_MXC_MMC
	select IMX_HAVE_PLATFORM_SPI_IMX
	select MXC_DEBUG_BOARD
	select USB_ULPI_VIEWPORT if USB_ULPI
	select SOC_IMX27
	help
	  Include support for MX27PDK platform. This includes specific
	  configurations for the board and its peripherals.

config MACH_IMX27_VISSTRIM_M10
	bool "Vista Silicon i.MX27 Visstrim_m10"
	select IMX_HAVE_PLATFORM_GPIO_KEYS
	select IMX_HAVE_PLATFORM_IMX_I2C
	select IMX_HAVE_PLATFORM_IMX_SSI
	select IMX_HAVE_PLATFORM_IMX_UART
	select IMX_HAVE_PLATFORM_MX2_CAMERA
	select IMX_HAVE_PLATFORM_MX2_EMMA
	select IMX_HAVE_PLATFORM_MXC_EHCI
	select IMX_HAVE_PLATFORM_MXC_MMC
	select LEDS_GPIO_REGISTER
	select SOC_IMX27
	help
	  Include support for Visstrim_m10 platform and its different variants.
	  This includes specific configurations for the board and its
	  peripherals.

config MACH_PCA100
	bool "Phytec phyCARD-s (pca100)"
	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
	select IMX_HAVE_PLATFORM_IMX2_WDT
	select IMX_HAVE_PLATFORM_IMX_FB
	select IMX_HAVE_PLATFORM_IMX_I2C
	select IMX_HAVE_PLATFORM_IMX_SSI
	select IMX_HAVE_PLATFORM_IMX_UART
	select IMX_HAVE_PLATFORM_MXC_EHCI
	select IMX_HAVE_PLATFORM_MXC_MMC
	select IMX_HAVE_PLATFORM_MXC_NAND
	select IMX_HAVE_PLATFORM_MXC_W1
	select IMX_HAVE_PLATFORM_SPI_IMX
	select USB_ULPI_VIEWPORT if USB_ULPI
	select SOC_IMX27
	help
	  Include support for phyCARD-s (aka pca100) platform. This
	  includes specific configurations for the module and its peripherals.

config MACH_IMX27_DT
	bool "Support i.MX27 platforms from device tree"
	select SOC_IMX27
	help
	  Include support for Freescale i.MX27 based platforms
	  using the device tree for discovery

endif

if ARCH_MULTI_V6

comment "MX31 platforms:"

config MACH_MX31ADS
	bool "Support MX31ADS platforms"
	default y
	select IMX_HAVE_PLATFORM_IMX_I2C
	select IMX_HAVE_PLATFORM_IMX_SSI
	select IMX_HAVE_PLATFORM_IMX_UART
	select SOC_IMX31
	help
	  Include support for MX31ADS platform. This includes specific
	  configurations for the board and its peripherals.

config MACH_MX31ADS_WM1133_EV1
	bool "Support Wolfson Microelectronics 1133-EV1 module"
	depends on MACH_MX31ADS
	depends on MFD_WM8350_I2C
	depends on REGULATOR_WM8350 = y
	help
	  Include support for the Wolfson Microelectronics 1133-EV1 PMU
	  and audio module for the MX31ADS platform.

config MACH_MX31LILLY
	bool "Support MX31 LILLY-1131 platforms (INCO startec)"
	select IMX_HAVE_PLATFORM_IMX_UART
	select IMX_HAVE_PLATFORM_IPU_CORE
	select IMX_HAVE_PLATFORM_MXC_EHCI
	select IMX_HAVE_PLATFORM_MXC_MMC
	select IMX_HAVE_PLATFORM_SPI_IMX
	select USB_ULPI_VIEWPORT if USB_ULPI
	select SOC_IMX31
	help
	  Include support for mx31 based LILLY1131 modules. This includes
	  specific configurations for the board and its peripherals.

config MACH_MX31LITE
	bool "Support MX31 LITEKIT (LogicPD)"
	select IMX_HAVE_PLATFORM_IMX2_WDT
	select IMX_HAVE_PLATFORM_IMX_UART
	select IMX_HAVE_PLATFORM_MXC_EHCI
	select IMX_HAVE_PLATFORM_MXC_MMC
	select IMX_HAVE_PLATFORM_MXC_NAND
	select IMX_HAVE_PLATFORM_MXC_RTC
	select IMX_HAVE_PLATFORM_SPI_IMX
	select LEDS_GPIO_REGISTER
	select USB_ULPI_VIEWPORT if USB_ULPI
	select SOC_IMX31
	help
	  Include support for MX31 LITEKIT platform. This includes specific
	  configurations for the board and its peripherals.

config MACH_PCM037
	bool "Support Phytec pcm037 (i.MX31) platforms"
	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
	select IMX_HAVE_PLATFORM_IMX2_WDT
	select IMX_HAVE_PLATFORM_IMX_I2C
	select IMX_HAVE_PLATFORM_IMX_UART
	select IMX_HAVE_PLATFORM_IPU_CORE
	select IMX_HAVE_PLATFORM_MXC_EHCI
	select IMX_HAVE_PLATFORM_MXC_MMC
	select IMX_HAVE_PLATFORM_MXC_NAND
	select IMX_HAVE_PLATFORM_MXC_W1
	select USB_ULPI_VIEWPORT if USB_ULPI
	select SOC_IMX31
	help
	  Include support for Phytec pcm037 platform. This includes
	  specific configurations for the board and its peripherals.

config MACH_PCM037_EET
	bool "Support pcm037 EET board extensions"
	depends on MACH_PCM037
	select IMX_HAVE_PLATFORM_GPIO_KEYS
	select IMX_HAVE_PLATFORM_SPI_IMX
	help
	  Add support for PCM037 EET baseboard extensions. If you are using the
	  OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
	  command-line parameter.

config MACH_MX31_3DS
	bool "Support MX31PDK (3DS)"
	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
	select IMX_HAVE_PLATFORM_IMX2_WDT
	select IMX_HAVE_PLATFORM_IMX_I2C
	select IMX_HAVE_PLATFORM_IMX_KEYPAD
	select IMX_HAVE_PLATFORM_IMX_SSI
	select IMX_HAVE_PLATFORM_IMX_UART
	select IMX_HAVE_PLATFORM_IPU_CORE
	select IMX_HAVE_PLATFORM_MXC_EHCI
	select IMX_HAVE_PLATFORM_MXC_MMC
	select IMX_HAVE_PLATFORM_MXC_NAND
	select IMX_HAVE_PLATFORM_SPI_IMX
	select MXC_DEBUG_BOARD
	select USB_ULPI_VIEWPORT if USB_ULPI
	select SOC_IMX31
	help
	  Include support for MX31PDK (3DS) platform. This includes specific
	  configurations for the board and its peripherals.

config MACH_MX31_3DS_MXC_NAND_USE_BBT
	bool "Make the MXC NAND driver use the in flash Bad Block Table"
	depends on MACH_MX31_3DS
	depends on MTD_NAND_MXC
	help
	  Enable this if you want that the MXC NAND driver uses the in flash
	  Bad Block Table to know what blocks are bad instead of scanning the
	  entire flash looking for bad block markers.

config MACH_MX31MOBOARD
	bool "Support mx31moboard platforms (EPFL Mobots group)"
	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
	select IMX_HAVE_PLATFORM_IMX2_WDT
	select IMX_HAVE_PLATFORM_IMX_I2C
	select IMX_HAVE_PLATFORM_IMX_SSI
	select IMX_HAVE_PLATFORM_IMX_UART
	select IMX_HAVE_PLATFORM_IPU_CORE
	select IMX_HAVE_PLATFORM_MXC_EHCI
	select IMX_HAVE_PLATFORM_MXC_MMC
	select IMX_HAVE_PLATFORM_SPI_IMX
	select LEDS_GPIO_REGISTER
	select USB_ULPI_VIEWPORT if USB_ULPI
	select SOC_IMX31
	help
	  Include support for mx31moboard platform. This includes specific
	  configurations for the board and its peripherals.

config MACH_QONG
	bool "Support Dave/DENX QongEVB-LITE platform"
	select IMX_HAVE_PLATFORM_IMX2_WDT
	select IMX_HAVE_PLATFORM_IMX_UART
	select SOC_IMX31
	help
	  Include support for Dave/DENX QongEVB-LITE platform. This includes
	  specific configurations for the board and its peripherals.

config MACH_ARMADILLO5X0
	bool "Support Atmark Armadillo-500 Development Base Board"
	select IMX_HAVE_PLATFORM_GPIO_KEYS
	select IMX_HAVE_PLATFORM_IMX_I2C
	select IMX_HAVE_PLATFORM_IMX_UART
	select IMX_HAVE_PLATFORM_IPU_CORE
	select IMX_HAVE_PLATFORM_MXC_EHCI
	select IMX_HAVE_PLATFORM_MXC_MMC
	select IMX_HAVE_PLATFORM_MXC_NAND
	select USB_ULPI_VIEWPORT if USB_ULPI
	select SOC_IMX31
	help
	  Include support for Atmark Armadillo-500 platform. This includes
	  specific configurations for the board and its peripherals.

config MACH_KZM_ARM11_01
	bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
	select IMX_HAVE_PLATFORM_IMX_UART
	select SOC_IMX31
	help
	  Include support for KZM-ARM11-01. This includes specific
	  configurations for the board and its peripherals.

config MACH_BUG
	bool "Support Buglabs BUGBase platform"
	default y
	select IMX_HAVE_PLATFORM_IMX_UART
	select SOC_IMX31
	help
	  Include support for BUGBase 1.3 platform. This includes specific
	  configurations for the board and its peripherals.

config MACH_IMX31_DT
	bool "Support i.MX31 platforms from device tree"
	select SOC_IMX31
	help
	  Include support for Freescale i.MX31 based platforms
	  using the device tree for discovery.

comment "MX35 platforms:"

config MACH_IMX35_DT
	bool "Support i.MX35 platforms from device tree"
	select SOC_IMX35
	help
	  Include support for Freescale i.MX35 based platforms
	  using the device tree for discovery.

config MACH_PCM043
	bool "Support Phytec pcm043 (i.MX35) platforms"
	select IMX_HAVE_PLATFORM_FLEXCAN
	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
	select IMX_HAVE_PLATFORM_IMX2_WDT
	select IMX_HAVE_PLATFORM_IMX_I2C
	select IMX_HAVE_PLATFORM_IMX_SSI
	select IMX_HAVE_PLATFORM_IMX_UART
	select IMX_HAVE_PLATFORM_IPU_CORE
	select IMX_HAVE_PLATFORM_MXC_EHCI
	select IMX_HAVE_PLATFORM_MXC_NAND
	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
	select USB_ULPI_VIEWPORT if USB_ULPI
	select SOC_IMX35
	help
	  Include support for Phytec pcm043 platform. This includes
	  specific configurations for the board and its peripherals.

config MACH_MX35_3DS
	bool "Support MX35PDK platform"
	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
	select IMX_HAVE_PLATFORM_IMX2_WDT
	select IMX_HAVE_PLATFORM_IMX_FB
	select IMX_HAVE_PLATFORM_IMX_I2C
	select IMX_HAVE_PLATFORM_IMX_UART
	select IMX_HAVE_PLATFORM_IPU_CORE
	select IMX_HAVE_PLATFORM_MXC_EHCI
	select IMX_HAVE_PLATFORM_MXC_NAND
	select IMX_HAVE_PLATFORM_MXC_RTC
	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
	select MXC_DEBUG_BOARD
	select SOC_IMX35
	help
	  Include support for MX35PDK platform. This includes specific
	  configurations for the board and its peripherals.

config MACH_VPR200
	bool "Support VPR200 platform"
	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
	select IMX_HAVE_PLATFORM_GPIO_KEYS
	select IMX_HAVE_PLATFORM_IMX2_WDT
	select IMX_HAVE_PLATFORM_IMX_I2C
	select IMX_HAVE_PLATFORM_IMX_UART
	select IMX_HAVE_PLATFORM_IPU_CORE
	select IMX_HAVE_PLATFORM_MXC_EHCI
	select IMX_HAVE_PLATFORM_MXC_NAND
	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
	select SOC_IMX35
	help
	  Include support for VPR200 platform. This includes specific
	  configurations for the board and its peripherals.

endif

comment "Device tree only"

if ARCH_MULTI_V5

config SOC_IMX25
	bool "i.MX25 support"
	select ARCH_MXC_IOMUX_V3
	select CPU_ARM926T
	select MXC_AVIC
	select PINCTRL_IMX25
	help
	  This enables support for Freescale i.MX25 processor
endif

if ARCH_MULTI_V7

comment "Cortex-A platforms"

config SOC_IMX5
	bool
	select HAVE_IMX_SRC
	select MXC_TZIC

config	SOC_IMX50
	bool "i.MX50 support"
	select PINCTRL_IMX50
	select SOC_IMX5

	help
	  This enables support for Freescale i.MX50 processor.

config SOC_IMX51
	bool "i.MX51 support"
	select PINCTRL_IMX51
	select SOC_IMX5
	help
	  This enables support for Freescale i.MX51 processor

config	SOC_IMX53
	bool "i.MX53 support"
	select PINCTRL_IMX53
	select SOC_IMX5

	help
	  This enables support for Freescale i.MX53 processor.

config SOC_IMX6
	bool
	select ARM_ERRATA_754322
	select ARM_ERRATA_775420
	select ARM_GIC
	select HAVE_IMX_ANATOP
	select HAVE_IMX_GPC
	select HAVE_IMX_MMDC
	select HAVE_IMX_SRC
	select MFD_SYSCON
	select PL310_ERRATA_769419 if CACHE_L2X0

config SOC_IMX6Q
	bool "i.MX6 Quad/DualLite support"
	select ARM_ERRATA_764369 if SMP
	select HAVE_ARM_SCU if SMP
	select HAVE_ARM_TWD if SMP
	select PCI_DOMAINS if PCI
	select PINCTRL_IMX6Q
	select SOC_IMX6

	help
	  This enables support for Freescale i.MX6 Quad processor.

config SOC_IMX6SL
	bool "i.MX6 SoloLite support"
	select PINCTRL_IMX6SL
	select SOC_IMX6

	help
	  This enables support for Freescale i.MX6 SoloLite processor.

config SOC_IMX6SX
	bool "i.MX6 SoloX support"
	select PINCTRL_IMX6SX
	select SOC_IMX6

	help
	  This enables support for Freescale i.MX6 SoloX processor.

config SOC_IMX6UL
	bool "i.MX6 UltraLite support"
	select PINCTRL_IMX6UL
	select SOC_IMX6

	help
	  This enables support for Freescale i.MX6 UltraLite processor.

config SOC_IMX7D
	bool "i.MX7 Dual support"
	select PINCTRL_IMX7D
	select ARM_GIC
	select HAVE_IMX_ANATOP
	select HAVE_IMX_MMDC
	select HAVE_IMX_SRC
	help
		This enables support for Freescale i.MX7 Dual processor.

config SOC_LS1021A
	bool "Freescale LS1021A support"
	select ARM_GIC
	select HAVE_ARM_ARCH_TIMER
	select PCI_DOMAINS if PCI
	select ZONE_DMA if ARM_LPAE
	help
	  This enables support for Freescale LS1021A processor.

endif

comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms"

if ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M

config SOC_VF610
	bool "Vybrid Family VF610 support"
	select ARM_GIC if ARCH_MULTI_V7
	select PINCTRL_VF610
	select PL310_ERRATA_769419 if CACHE_L2X0
	select SMP_ON_UP if SMP

	help
	  This enables support for Freescale Vybrid VF610 processor.

choice
	prompt "Clocksource for scheduler clock"
	depends on SOC_VF610
	default VF_USE_ARM_GLOBAL_TIMER

	config VF_USE_ARM_GLOBAL_TIMER
		bool "Use ARM Global Timer"
		depends on ARCH_MULTI_V7
		select ARM_GLOBAL_TIMER
		select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
		help
		  Use the ARM Global Timer as clocksource

	config VF_USE_PIT_TIMER
		bool "Use PIT timer"
		select VF_PIT_TIMER
		help
		  Use SoC Periodic Interrupt Timer (PIT) as clocksource

endchoice

endif

source "arch/arm/mach-imx/devices/Kconfig"

endif
Commit	Line	Data
21278aea	1	menuconfig ARCH_MXC
e3246542 MY	2	bool "Freescale i.MX family"
e3246542 MY	3	depends on ARCH_MULTI_V4_V5 \|\| ARCH_MULTI_V6_V7 \|\| ARM_SINGLE_ARMV7M
c5a0d497	4	select ARCH_REQUIRE_GPIOLIB
f36b594f	5	select ARM_CPU_SUSPEND if PM
bea5af41	6	select CLKSRC_IMX_GPT
c5a0d497	7	select GENERIC_IRQ_CHIP
f7f3d4b2	8	select PINCTRL
5a1513f6	9	select PM_OPP if PM
a2887546	10	select SOC_BUS
67f5b308	11	select SRAM
c5a0d497 SG	12	help
	13	Support for Freescale MXC/iMX-based family of processors
	14
21278aea	15	if ARCH_MXC
3995eb82	16
3995eb82 SG	17	config MXC_TZIC
	18	bool
	19
	20	config MXC_AVIC
	21	bool
	22
	23	config MXC_DEBUG_BOARD
	24	bool "Enable MXC debug board(for 3-stack)"
ae4aee95	25	depends on MACH_MX27_3DS \|\| MACH_MX31_3DS \|\| MACH_MX35_3DS
3995eb82 SG	26	help
	27	The debug board is an integral part of the MXC 3-stack(PDK)
	28	platforms, it can be attached or removed from the peripheral
	29	board. On debug board, several debug devices(ethernet, UART,
	30	buttons, LEDs and JTAG) are implemented. Between the MCU and
	31	these devices, a CPLD is added as a bridge which performs
	32	data/address de-multiplexing and decode, signal level shift,
	33	interrupt control and various board functions.
	34
	35	config HAVE_EPIT
	36	bool
	37
	38	config MXC_USE_EPIT
	39	bool "Use EPIT instead of GPT"
	40	depends on HAVE_EPIT
	41	help
	42	Use EPIT as the system timer on systems that have it. Normally you
	43	don't have a reason to do so as the EPIT has the same features and
	44	uses the same clocks as the GPT. Anyway, on some systems the GPT
	45	may be in use for other purposes.
	46
3995eb82 SG	47	config ARCH_HAS_RNGA
	48	bool
	49
e95dddb3 AH	50	config HAVE_IMX_ANATOP
	51	bool
	52
9fbbe689 SG	53	config HAVE_IMX_GPC
9fbbe689 SG	54	bool
00eb60a8	55	select PM_GENERIC_DOMAINS if PM
9fbbe689 SG	56
	57	config HAVE_IMX_MMDC
	58	bool
	59
	60	config HAVE_IMX_SRC
68b25325	61	def_bool y if SMP
02985b94	62	select ARCH_HAS_RESET_CONTROLLER
9fbbe689	63
267dd34c SG	64	config IMX_HAVE_IOMUX_V1
	65	bool
	66
	67	config ARCH_MXC_IOMUX_V3
	68	bool
	69
e780d239	70	config SOC_IMX1
e48ab1c1	71	bool
e780d239 UKK	72	select CPU_ARM920T
e780d239 UKK	73	select IMX_HAVE_IOMUX_V1
c7259df3	74	select MXC_AVIC
24980dc8	75	select PINCTRL_IMX1
e48ab1c1 UKK	76
	77	config SOC_IMX21
	78	bool
b1b3f49c	79	select CPU_ARM926T
e48ab1c1	80	select IMX_HAVE_IOMUX_V1
c7259df3	81	select MXC_AVIC
e48ab1c1	82
e48ab1c1 UKK	83	config SOC_IMX27
e48ab1c1 UKK	84	bool
b1b3f49c	85	select CPU_ARM926T
e48ab1c1	86	select IMX_HAVE_IOMUX_V1
c7259df3	87	select MXC_AVIC
acb350e0	88	select PINCTRL_IMX27
e48ab1c1	89
27ad4bf7 UKK	90	config SOC_IMX31
	91	bool
	92	select CPU_V6
	93	select IMX_HAVE_PLATFORM_MXC_RNGA
27ad4bf7	94	select MXC_AVIC
a89cf59b	95	select SMP_ON_UP if SMP
27ad4bf7 UKK	96
	97	config SOC_IMX35
	98	bool
27ad4bf7	99	select ARCH_MXC_IOMUX_V3
27ad4bf7	100	select HAVE_EPIT
27ad4bf7	101	select MXC_AVIC
c51bcd15	102	select PINCTRL_IMX35
a89cf59b	103	select SMP_ON_UP if SMP
27ad4bf7	104
c5a0d497	105	if ARCH_MULTI_V4T
e780d239	106
07469495	107	comment "MX1 platforms:"
07469495 UKK	108
	109	config MACH_SCB9328
	110	bool "Synertronixx scb9328"
d112f4e4	111	select IMX_HAVE_PLATFORM_IMX_UART
123860e1	112	select SOC_IMX1
07469495 UKK	113	help
	114	Say Y here if you are using a Synertronixx scb9328 board
	115
7fc92c60 GGM	116	config MACH_APF9328
7fc92c60 GGM	117	bool "APF9328"
7a994818	118	select IMX_HAVE_PLATFORM_IMX_I2C
7fc92c60	119	select IMX_HAVE_PLATFORM_IMX_UART
b1b3f49c	120	select SOC_IMX1
7fc92c60 GGM	121	help
	122	Say Yes here if you are using the Armadeus APF9328 development board
	123
24980dc8 AS	124	config MACH_IMX1_DT
	125	bool "Support i.MX1 platforms from device tree"
	126	select SOC_IMX1
	127	help
	128	Include support for Freescale i.MX1 based platforms
	129	using the device tree for discovery.
	130
c5a0d497 SG	131	endif
	132
	133	if ARCH_MULTI_V5
	134
b6b06be0	135	comment "MX21 platforms:"
80eedae6	136
6b91edde IC	137	config MACH_MX21ADS
6b91edde IC	138	bool "MX21ADS platform"
ad851bff	139	select IMX_HAVE_PLATFORM_IMX_FB
3c5227fd	140	select IMX_HAVE_PLATFORM_IMX_UART
9d3d945a	141	select IMX_HAVE_PLATFORM_MXC_MMC
1f8d721c	142	select IMX_HAVE_PLATFORM_MXC_NAND
b1b3f49c	143	select SOC_IMX21
6b91edde IC	144	help
	145	Include support for MX21ADS platform. This includes specific
	146	configurations for the board and its peripherals.
	147
b6b06be0 UKK	148	comment "MX27 platforms:"
b6b06be0 UKK	149
80eedae6 JB	150	config MACH_MX27ADS
80eedae6 JB	151	bool "MX27ADS platform"
ad851bff	152	select IMX_HAVE_PLATFORM_IMX_FB
c6987159	153	select IMX_HAVE_PLATFORM_IMX_I2C
d5dac4a6	154	select IMX_HAVE_PLATFORM_IMX_UART
9d3d945a	155	select IMX_HAVE_PLATFORM_MXC_MMC
0e7a29a8	156	select IMX_HAVE_PLATFORM_MXC_NAND
ae71a562	157	select IMX_HAVE_PLATFORM_MXC_W1
b1b3f49c	158	select SOC_IMX27
80eedae6 JB	159	help
	160	Include support for MX27ADS platform. This includes specific
	161	configurations for the board and its peripherals.
7e5e9f54	162
ec9be0de FE	163	config MACH_MX27_3DS
ec9be0de FE	164	bool "MX27PDK platform"
96cf4239	165	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
8be9252f	166	select IMX_HAVE_PLATFORM_IMX2_WDT
1abcb4cc	167	select IMX_HAVE_PLATFORM_IMX_FB
5885f036	168	select IMX_HAVE_PLATFORM_IMX_I2C
3f880141	169	select IMX_HAVE_PLATFORM_IMX_KEYPAD
688b5cbb	170	select IMX_HAVE_PLATFORM_IMX_SSI
d5dac4a6	171	select IMX_HAVE_PLATFORM_IMX_UART
4c11c286	172	select IMX_HAVE_PLATFORM_MX2_CAMERA
96cf4239	173	select IMX_HAVE_PLATFORM_MXC_EHCI
9d3d945a	174	select IMX_HAVE_PLATFORM_MXC_MMC
c67a3e09	175	select IMX_HAVE_PLATFORM_SPI_IMX
92cb33f1	176	select MXC_DEBUG_BOARD
794987ac	177	select USB_ULPI_VIEWPORT if USB_ULPI
b1b3f49c	178	select SOC_IMX27
ec9be0de FE	179	help
	180	Include support for MX27PDK platform. This includes specific
	181	configurations for the board and its peripherals.
8c032ec3	182
3b161e51 JM	183	config MACH_IMX27_VISSTRIM_M10
3b161e51 JM	184	bool "Vista Silicon i.MX27 Visstrim_m10"
5309498a	185	select IMX_HAVE_PLATFORM_GPIO_KEYS
3b161e51	186	select IMX_HAVE_PLATFORM_IMX_I2C
5658bff6	187	select IMX_HAVE_PLATFORM_IMX_SSI
3b161e51	188	select IMX_HAVE_PLATFORM_IMX_UART
f52f5a55	189	select IMX_HAVE_PLATFORM_MX2_CAMERA
3ab3a350	190	select IMX_HAVE_PLATFORM_MX2_EMMA
2eb42d5c	191	select IMX_HAVE_PLATFORM_MXC_EHCI
32189139	192	select IMX_HAVE_PLATFORM_MXC_MMC
acb6464c	193	select LEDS_GPIO_REGISTER
b1b3f49c	194	select SOC_IMX27
3b161e51 JM	195	help
	196	Include support for Visstrim_m10 platform and its different variants.
	197	This includes specific configurations for the board and its
	198	peripherals.
	199
33731698 LF	200	config MACH_PCA100
33731698 LF	201	bool "Phytec phyCARD-s (pca100)"
bd455ed3	202	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
e0a1961d	203	select IMX_HAVE_PLATFORM_IMX2_WDT
ad851bff	204	select IMX_HAVE_PLATFORM_IMX_FB
c6987159	205	select IMX_HAVE_PLATFORM_IMX_I2C
4697bb92	206	select IMX_HAVE_PLATFORM_IMX_SSI
d5dac4a6	207	select IMX_HAVE_PLATFORM_IMX_UART
2eb42d5c	208	select IMX_HAVE_PLATFORM_MXC_EHCI
9d3d945a	209	select IMX_HAVE_PLATFORM_MXC_MMC
0e7a29a8	210	select IMX_HAVE_PLATFORM_MXC_NAND
ae71a562	211	select IMX_HAVE_PLATFORM_MXC_W1
7536cf99	212	select IMX_HAVE_PLATFORM_SPI_IMX
794987ac	213	select USB_ULPI_VIEWPORT if USB_ULPI
b1b3f49c	214	select SOC_IMX27
33731698 LF	215	help
	216	Include support for phyCARD-s (aka pca100) platform. This
	217	includes specific configurations for the module and its peripherals.
	218
9f0749e3 SH	219	config MACH_IMX27_DT
	220	bool "Support i.MX27 platforms from device tree"
	221	select SOC_IMX27
9f0749e3 SH	222	help
	223	Include support for Freescale i.MX27 based platforms
	224	using the device tree for discovery
	225
6bbdbf2f	226	endif
27ad4bf7	227
c5a0d497	228	if ARCH_MULTI_V6
27ad4bf7 UKK	229
	230	comment "MX31 platforms:"
	231
	232	config MACH_MX31ADS
	233	bool "Support MX31ADS platforms"
b1b3f49c	234	default y
27ad4bf7 UKK	235	select IMX_HAVE_PLATFORM_IMX_I2C
	236	select IMX_HAVE_PLATFORM_IMX_SSI
	237	select IMX_HAVE_PLATFORM_IMX_UART
b1b3f49c	238	select SOC_IMX31
27ad4bf7 UKK	239	help
	240	Include support for MX31ADS platform. This includes specific
	241	configurations for the board and its peripherals.
	242
	243	config MACH_MX31ADS_WM1133_EV1
	244	bool "Support Wolfson Microelectronics 1133-EV1 module"
	245	depends on MACH_MX31ADS
	246	depends on MFD_WM8350_I2C
69eb383a	247	depends on REGULATOR_WM8350 = y
27ad4bf7 UKK	248	help
	249	Include support for the Wolfson Microelectronics 1133-EV1 PMU
	250	and audio module for the MX31ADS platform.
	251
	252	config MACH_MX31LILLY
	253	bool "Support MX31 LILLY-1131 platforms (INCO startec)"
27ad4bf7 UKK	254	select IMX_HAVE_PLATFORM_IMX_UART
	255	select IMX_HAVE_PLATFORM_IPU_CORE
	256	select IMX_HAVE_PLATFORM_MXC_EHCI
	257	select IMX_HAVE_PLATFORM_MXC_MMC
	258	select IMX_HAVE_PLATFORM_SPI_IMX
794987ac	259	select USB_ULPI_VIEWPORT if USB_ULPI
b1b3f49c	260	select SOC_IMX31
27ad4bf7 UKK	261	help
	262	Include support for mx31 based LILLY1131 modules. This includes
	263	specific configurations for the board and its peripherals.
	264
	265	config MACH_MX31LITE
	266	bool "Support MX31 LITEKIT (LogicPD)"
27ad4bf7 UKK	267	select IMX_HAVE_PLATFORM_IMX2_WDT
	268	select IMX_HAVE_PLATFORM_IMX_UART
	269	select IMX_HAVE_PLATFORM_MXC_EHCI
	270	select IMX_HAVE_PLATFORM_MXC_MMC
	271	select IMX_HAVE_PLATFORM_MXC_NAND
	272	select IMX_HAVE_PLATFORM_MXC_RTC
	273	select IMX_HAVE_PLATFORM_SPI_IMX
47e837b5	274	select LEDS_GPIO_REGISTER
794987ac	275	select USB_ULPI_VIEWPORT if USB_ULPI
b1b3f49c	276	select SOC_IMX31
27ad4bf7 UKK	277	help
	278	Include support for MX31 LITEKIT platform. This includes specific
	279	configurations for the board and its peripherals.
	280
	281	config MACH_PCM037
	282	bool "Support Phytec pcm037 (i.MX31) platforms"
27ad4bf7 UKK	283	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
	284	select IMX_HAVE_PLATFORM_IMX2_WDT
	285	select IMX_HAVE_PLATFORM_IMX_I2C
	286	select IMX_HAVE_PLATFORM_IMX_UART
	287	select IMX_HAVE_PLATFORM_IPU_CORE
	288	select IMX_HAVE_PLATFORM_MXC_EHCI
	289	select IMX_HAVE_PLATFORM_MXC_MMC
	290	select IMX_HAVE_PLATFORM_MXC_NAND
	291	select IMX_HAVE_PLATFORM_MXC_W1
794987ac	292	select USB_ULPI_VIEWPORT if USB_ULPI
b1b3f49c	293	select SOC_IMX31
27ad4bf7 UKK	294	help
	295	Include support for Phytec pcm037 platform. This includes
	296	specific configurations for the board and its peripherals.
	297
	298	config MACH_PCM037_EET
	299	bool "Support pcm037 EET board extensions"
	300	depends on MACH_PCM037
	301	select IMX_HAVE_PLATFORM_GPIO_KEYS
	302	select IMX_HAVE_PLATFORM_SPI_IMX
	303	help
	304	Add support for PCM037 EET baseboard extensions. If you are using the
	305	OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
	306	command-line parameter.
	307
	308	config MACH_MX31_3DS
	309	bool "Support MX31PDK (3DS)"
27ad4bf7 UKK	310	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
	311	select IMX_HAVE_PLATFORM_IMX2_WDT
	312	select IMX_HAVE_PLATFORM_IMX_I2C
	313	select IMX_HAVE_PLATFORM_IMX_KEYPAD
3ef7cf18	314	select IMX_HAVE_PLATFORM_IMX_SSI
27ad4bf7 UKK	315	select IMX_HAVE_PLATFORM_IMX_UART
	316	select IMX_HAVE_PLATFORM_IPU_CORE
	317	select IMX_HAVE_PLATFORM_MXC_EHCI
d093d5bb	318	select IMX_HAVE_PLATFORM_MXC_MMC
27ad4bf7 UKK	319	select IMX_HAVE_PLATFORM_MXC_NAND
27ad4bf7 UKK	320	select IMX_HAVE_PLATFORM_SPI_IMX
b1b3f49c	321	select MXC_DEBUG_BOARD
794987ac	322	select USB_ULPI_VIEWPORT if USB_ULPI
b1b3f49c	323	select SOC_IMX31
27ad4bf7 UKK	324	help
	325	Include support for MX31PDK (3DS) platform. This includes specific
	326	configurations for the board and its peripherals.
	327
	328	config MACH_MX31_3DS_MXC_NAND_USE_BBT
	329	bool "Make the MXC NAND driver use the in flash Bad Block Table"
	330	depends on MACH_MX31_3DS
	331	depends on MTD_NAND_MXC
	332	help
	333	Enable this if you want that the MXC NAND driver uses the in flash
	334	Bad Block Table to know what blocks are bad instead of scanning the
	335	entire flash looking for bad block markers.
	336
	337	config MACH_MX31MOBOARD
	338	bool "Support mx31moboard platforms (EPFL Mobots group)"
27ad4bf7	339	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
31776fbc	340	select IMX_HAVE_PLATFORM_IMX2_WDT
27ad4bf7	341	select IMX_HAVE_PLATFORM_IMX_I2C
2f7b9451	342	select IMX_HAVE_PLATFORM_IMX_SSI
27ad4bf7 UKK	343	select IMX_HAVE_PLATFORM_IMX_UART
	344	select IMX_HAVE_PLATFORM_IPU_CORE
	345	select IMX_HAVE_PLATFORM_MXC_EHCI
	346	select IMX_HAVE_PLATFORM_MXC_MMC
	347	select IMX_HAVE_PLATFORM_SPI_IMX
47e837b5	348	select LEDS_GPIO_REGISTER
794987ac	349	select USB_ULPI_VIEWPORT if USB_ULPI
b1b3f49c	350	select SOC_IMX31
27ad4bf7 UKK	351	help
	352	Include support for mx31moboard platform. This includes specific
	353	configurations for the board and its peripherals.
	354
	355	config MACH_QONG
	356	bool "Support Dave/DENX QongEVB-LITE platform"
bbb43363	357	select IMX_HAVE_PLATFORM_IMX2_WDT
b1b3f49c RK	358	select IMX_HAVE_PLATFORM_IMX_UART
b1b3f49c RK	359	select SOC_IMX31
27ad4bf7 UKK	360	help
	361	Include support for Dave/DENX QongEVB-LITE platform. This includes
	362	specific configurations for the board and its peripherals.
	363
	364	config MACH_ARMADILLO5X0
	365	bool "Support Atmark Armadillo-500 Development Base Board"
27ad4bf7 UKK	366	select IMX_HAVE_PLATFORM_GPIO_KEYS
	367	select IMX_HAVE_PLATFORM_IMX_I2C
	368	select IMX_HAVE_PLATFORM_IMX_UART
	369	select IMX_HAVE_PLATFORM_IPU_CORE
	370	select IMX_HAVE_PLATFORM_MXC_EHCI
	371	select IMX_HAVE_PLATFORM_MXC_MMC
	372	select IMX_HAVE_PLATFORM_MXC_NAND
794987ac	373	select USB_ULPI_VIEWPORT if USB_ULPI
b1b3f49c	374	select SOC_IMX31
27ad4bf7 UKK	375	help
	376	Include support for Atmark Armadillo-500 platform. This includes
	377	specific configurations for the board and its peripherals.
	378
	379	config MACH_KZM_ARM11_01
	380	bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
27ad4bf7	381	select IMX_HAVE_PLATFORM_IMX_UART
b1b3f49c	382	select SOC_IMX31
27ad4bf7 UKK	383	help
	384	Include support for KZM-ARM11-01. This includes specific
	385	configurations for the board and its peripherals.
	386
	387	config MACH_BUG
	388	bool "Support Buglabs BUGBase platform"
27ad4bf7	389	default y
b1b3f49c RK	390	select IMX_HAVE_PLATFORM_IMX_UART
b1b3f49c RK	391	select SOC_IMX31
27ad4bf7 UKK	392	help
	393	Include support for BUGBase 1.3 platform. This includes specific
	394	configurations for the board and its peripherals.
	395
d2a37b3d DGC	396	config MACH_IMX31_DT
	397	bool "Support i.MX31 platforms from device tree"
	398	select SOC_IMX31
d2a37b3d DGC	399	help
	400	Include support for Freescale i.MX31 based platforms
	401	using the device tree for discovery.
	402
27ad4bf7 UKK	403	comment "MX35 platforms:"
27ad4bf7 UKK	404
a55a3d72 ST	405	config MACH_IMX35_DT
	406	bool "Support i.MX35 platforms from device tree"
	407	select SOC_IMX35
	408	help
	409	Include support for Freescale i.MX35 based platforms
	410	using the device tree for discovery.
	411
27ad4bf7 UKK	412	config MACH_PCM043
27ad4bf7 UKK	413	bool "Support Phytec pcm043 (i.MX35) platforms"
27ad4bf7 UKK	414	select IMX_HAVE_PLATFORM_FLEXCAN
	415	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
	416	select IMX_HAVE_PLATFORM_IMX2_WDT
	417	select IMX_HAVE_PLATFORM_IMX_I2C
	418	select IMX_HAVE_PLATFORM_IMX_SSI
	419	select IMX_HAVE_PLATFORM_IMX_UART
	420	select IMX_HAVE_PLATFORM_IPU_CORE
	421	select IMX_HAVE_PLATFORM_MXC_EHCI
	422	select IMX_HAVE_PLATFORM_MXC_NAND
	423	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
794987ac	424	select USB_ULPI_VIEWPORT if USB_ULPI
b1b3f49c	425	select SOC_IMX35
27ad4bf7 UKK	426	help
	427	Include support for Phytec pcm043 platform. This includes
	428	specific configurations for the board and its peripherals.
	429
	430	config MACH_MX35_3DS
	431	bool "Support MX35PDK platform"
27ad4bf7 UKK	432	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
27ad4bf7 UKK	433	select IMX_HAVE_PLATFORM_IMX2_WDT
8e3e26a8	434	select IMX_HAVE_PLATFORM_IMX_FB
27ad4bf7 UKK	435	select IMX_HAVE_PLATFORM_IMX_I2C
27ad4bf7 UKK	436	select IMX_HAVE_PLATFORM_IMX_UART
8e3e26a8	437	select IMX_HAVE_PLATFORM_IPU_CORE
27ad4bf7 UKK	438	select IMX_HAVE_PLATFORM_MXC_EHCI
27ad4bf7 UKK	439	select IMX_HAVE_PLATFORM_MXC_NAND
c6fd6d11	440	select IMX_HAVE_PLATFORM_MXC_RTC
27ad4bf7	441	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
b1b3f49c RK	442	select MXC_DEBUG_BOARD
b1b3f49c RK	443	select SOC_IMX35
27ad4bf7 UKK	444	help
	445	Include support for MX35PDK platform. This includes specific
	446	configurations for the board and its peripherals.
	447
27ad4bf7 UKK	448	config MACH_VPR200
27ad4bf7 UKK	449	bool "Support VPR200 platform"
27ad4bf7 UKK	450	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
	451	select IMX_HAVE_PLATFORM_GPIO_KEYS
	452	select IMX_HAVE_PLATFORM_IMX2_WDT
27ad4bf7	453	select IMX_HAVE_PLATFORM_IMX_I2C
b1b3f49c	454	select IMX_HAVE_PLATFORM_IMX_UART
27ad4bf7 UKK	455	select IMX_HAVE_PLATFORM_IPU_CORE
	456	select IMX_HAVE_PLATFORM_MXC_EHCI
	457	select IMX_HAVE_PLATFORM_MXC_NAND
	458	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
b1b3f49c	459	select SOC_IMX35
27ad4bf7 UKK	460	help
	461	Include support for VPR200 platform. This includes specific
	462	configurations for the board and its peripherals.
	463
c5a0d497 SG	464	endif
c5a0d497 SG	465
11b05d60 FE	466	comment "Device tree only"
11b05d60 FE	467
8064887e SA	468	if ARCH_MULTI_V5
8064887e SA	469
11b05d60 FE	470	config SOC_IMX25
	471	bool "i.MX25 support"
	472	select ARCH_MXC_IOMUX_V3
	473	select CPU_ARM926T
	474	select MXC_AVIC
	475	select PINCTRL_IMX25
	476	help
	477	This enables support for Freescale i.MX25 processor
	478	endif
	479
c5a0d497 SG	480	if ARCH_MULTI_V7
c5a0d497 SG	481
8064887e	482	comment "Cortex-A platforms"
784a90c0	483
50e177ca SG	484	config SOC_IMX5
50e177ca SG	485	bool
50e177ca SG	486	select HAVE_IMX_SRC
	487	select MXC_TZIC
	488
361b0a41 GU	489	config SOC_IMX50
361b0a41 GU	490	bool "i.MX50 support"
f7f3d4b2	491	select PINCTRL_IMX50
361b0a41 GU	492	select SOC_IMX5
	493
	494	help
	495	This enables support for Freescale i.MX50 processor.
	496
1ecdde9d	497	config SOC_IMX51
8da4d6b2	498	bool "i.MX51 support"
1ecdde9d SG	499	select PINCTRL_IMX51
1ecdde9d SG	500	select SOC_IMX5
8da4d6b2 FE	501	help
	502	This enables support for Freescale i.MX51 processor
	503
442279da SG	504	config SOC_IMX53
442279da SG	505	bool "i.MX53 support"
442279da	506	select PINCTRL_IMX53
b1b3f49c	507	select SOC_IMX5
784a90c0	508
784a90c0	509	help
442279da	510	This enables support for Freescale i.MX53 processor.
bac89d75	511
94f890ec SG	512	config SOC_IMX6
94f890ec SG	513	bool
96efb44e	514	select ARM_ERRATA_754322
96efb44e	515	select ARM_ERRATA_775420
bac89d75	516	select ARM_GIC
e95dddb3	517	select HAVE_IMX_ANATOP
9fbbe689 SG	518	select HAVE_IMX_GPC
9fbbe689 SG	519	select HAVE_IMX_MMDC
aec99b7b	520	select HAVE_IMX_SRC
baa64151	521	select MFD_SYSCON
a641f3a6	522	select PL310_ERRATA_769419 if CACHE_L2X0
bac89d75	523
94f890ec SG	524	config SOC_IMX6Q
	525	bool "i.MX6 Quad/DualLite support"
	526	select ARM_ERRATA_764369 if SMP
	527	select HAVE_ARM_SCU if SMP
	528	select HAVE_ARM_TWD if SMP
94f890ec SG	529	select PCI_DOMAINS if PCI
	530	select PINCTRL_IMX6Q
	531	select SOC_IMX6
	532
bac89d75 SG	533	help
	534	This enables support for Freescale i.MX6 Quad processor.
	535
31a2fbf7 SG	536	config SOC_IMX6SL
31a2fbf7 SG	537	bool "i.MX6 SoloLite support"
31a2fbf7	538	select PINCTRL_IMX6SL
94f890ec	539	select SOC_IMX6
31a2fbf7 SG	540
	541	help
	542	This enables support for Freescale i.MX6 SoloLite processor.
	543
d9654dce SG	544	config SOC_IMX6SX
	545	bool "i.MX6 SoloX support"
	546	select PINCTRL_IMX6SX
	547	select SOC_IMX6
	548
	549	help
	550	This enables support for Freescale i.MX6 SoloX processor.
	551
022d0716 FL	552	config SOC_IMX6UL
	553	bool "i.MX6 UltraLite support"
	554	select PINCTRL_IMX6UL
	555	select SOC_IMX6
	556
	557	help
	558	This enables support for Freescale i.MX6 UltraLite processor.
	559
5739b919 AH	560	config SOC_IMX7D
	561	bool "i.MX7 Dual support"
	562	select PINCTRL_IMX7D
	563	select ARM_GIC
0be5da9d AB	564	select HAVE_IMX_ANATOP
0be5da9d AB	565	select HAVE_IMX_MMDC
f1858b0e	566	select HAVE_IMX_SRC
5739b919 AH	567	help
	568	This enables support for Freescale i.MX7 Dual processor.
	569
8064887e SA	570	config SOC_LS1021A
	571	bool "Freescale LS1021A support"
	572	select ARM_GIC
	573	select HAVE_ARM_ARCH_TIMER
	574	select PCI_DOMAINS if PCI
	575	select ZONE_DMA if ARM_LPAE
	576	help
	577	This enables support for Freescale LS1021A processor.
	578
	579	endif
	580
	581	comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms"
	582
	583	if ARCH_MULTI_V7 \|\| ARM_SINGLE_ARMV7M
	584
5be913c6 JL	585	config SOC_VF610
5be913c6 JL	586	bool "Vybrid Family VF610 support"
8064887e	587	select ARM_GIC if ARCH_MULTI_V7
5be913c6	588	select PINCTRL_VF610
a641f3a6	589	select PL310_ERRATA_769419 if CACHE_L2X0
af321d2e	590	select SMP_ON_UP if SMP
5be913c6 JL	591
5be913c6 JL	592	help
c6891ef8	593	This enables support for Freescale Vybrid VF610 processor.
5be913c6	594
2a61cba7 SA	595	choice
	596	prompt "Clocksource for scheduler clock"
	597	depends on SOC_VF610
	598	default VF_USE_ARM_GLOBAL_TIMER
	599
	600	config VF_USE_ARM_GLOBAL_TIMER
e3246542 MY	601	bool "Use ARM Global Timer"
e3246542 MY	602	depends on ARCH_MULTI_V7
2a61cba7 SA	603	select ARM_GLOBAL_TIMER
	604	select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
	605	help
	606	Use the ARM Global Timer as clocksource
	607
	608	config VF_USE_PIT_TIMER
	609	bool "Use PIT timer"
	610	select VF_PIT_TIMER
	611	help
	612	Use SoC Periodic Interrupt Timer (PIT) as clocksource
	613
	614	endchoice
	615
27ad4bf7	616	endif
e0557c0d SG	617
e0557c0d SG	618	source "arch/arm/mach-imx/devices/Kconfig"
3995eb82	619
21278aea	620	endif