Commit | Line | Data |
---|---|---|
7c6337e2 KH |
1 | /* |
2 | * TI DaVinci EVM board support | |
3 | * | |
4 | * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> | |
5 | * | |
6 | * 2007 (c) MontaVista Software, Inc. This file is licensed under | |
7 | * the terms of the GNU General Public License version 2. This program | |
8 | * is licensed "as is" without any warranty of any kind, whether express | |
9 | * or implied. | |
10 | */ | |
11 | #include <linux/kernel.h> | |
7c6337e2 KH |
12 | #include <linux/init.h> |
13 | #include <linux/dma-mapping.h> | |
14 | #include <linux/platform_device.h> | |
7bff3c4c | 15 | #include <linux/gpio.h> |
7bff3c4c DB |
16 | #include <linux/i2c.h> |
17 | #include <linux/i2c/pcf857x.h> | |
18 | #include <linux/i2c/at24.h> | |
7c6337e2 | 19 | #include <linux/mtd/mtd.h> |
d0e47fba | 20 | #include <linux/mtd/nand.h> |
7c6337e2 KH |
21 | #include <linux/mtd/partitions.h> |
22 | #include <linux/mtd/physmap.h> | |
d0e47fba KH |
23 | #include <linux/phy.h> |
24 | #include <linux/clk.h> | |
ab8e8df8 MK |
25 | #include <linux/videodev2.h> |
26 | ||
27 | #include <media/tvp514x.h> | |
7c6337e2 | 28 | |
7c6337e2 | 29 | #include <asm/mach-types.h> |
7c6337e2 | 30 | #include <asm/mach/arch.h> |
7c6337e2 | 31 | |
d0e47fba | 32 | #include <mach/dm644x.h> |
a09e64fb | 33 | #include <mach/common.h> |
7bff3c4c | 34 | #include <mach/i2c.h> |
d0e47fba KH |
35 | #include <mach/serial.h> |
36 | #include <mach/mux.h> | |
d0e47fba | 37 | #include <mach/nand.h> |
2dbf56ae | 38 | #include <mach/mmc.h> |
355fb4e3 | 39 | #include <mach/usb.h> |
d0e47fba KH |
40 | |
41 | #define DM644X_EVM_PHY_MASK (0x2) | |
42 | #define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ | |
7c6337e2 | 43 | |
d0e47fba KH |
44 | #define LXT971_PHY_ID (0x001378e2) |
45 | #define LXT971_PHY_MASK (0xfffffff0) | |
7c6337e2 | 46 | |
7bff3c4c | 47 | static struct mtd_partition davinci_evm_norflash_partitions[] = { |
d0e47fba | 48 | /* bootloader (UBL, U-Boot, etc) in first 5 sectors */ |
7c6337e2 KH |
49 | { |
50 | .name = "bootloader", | |
51 | .offset = 0, | |
d0e47fba | 52 | .size = 5 * SZ_64K, |
7c6337e2 KH |
53 | .mask_flags = MTD_WRITEABLE, /* force read-only */ |
54 | }, | |
55 | /* bootloader params in the next 1 sectors */ | |
56 | { | |
57 | .name = "params", | |
58 | .offset = MTDPART_OFS_APPEND, | |
59 | .size = SZ_64K, | |
60 | .mask_flags = 0, | |
61 | }, | |
62 | /* kernel */ | |
63 | { | |
64 | .name = "kernel", | |
65 | .offset = MTDPART_OFS_APPEND, | |
66 | .size = SZ_2M, | |
67 | .mask_flags = 0 | |
68 | }, | |
69 | /* file system */ | |
70 | { | |
71 | .name = "filesystem", | |
72 | .offset = MTDPART_OFS_APPEND, | |
73 | .size = MTDPART_SIZ_FULL, | |
74 | .mask_flags = 0 | |
75 | } | |
76 | }; | |
77 | ||
7bff3c4c | 78 | static struct physmap_flash_data davinci_evm_norflash_data = { |
7c6337e2 | 79 | .width = 2, |
7bff3c4c DB |
80 | .parts = davinci_evm_norflash_partitions, |
81 | .nr_parts = ARRAY_SIZE(davinci_evm_norflash_partitions), | |
7c6337e2 KH |
82 | }; |
83 | ||
84 | /* NOTE: CFI probe will correctly detect flash part as 32M, but EMIF | |
85 | * limits addresses to 16M, so using addresses past 16M will wrap */ | |
7bff3c4c | 86 | static struct resource davinci_evm_norflash_resource = { |
70342174 SS |
87 | .start = DM644X_ASYNC_EMIF_DATA_CE0_BASE, |
88 | .end = DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, | |
7c6337e2 KH |
89 | .flags = IORESOURCE_MEM, |
90 | }; | |
91 | ||
7bff3c4c | 92 | static struct platform_device davinci_evm_norflash_device = { |
7c6337e2 KH |
93 | .name = "physmap-flash", |
94 | .id = 0, | |
95 | .dev = { | |
7bff3c4c | 96 | .platform_data = &davinci_evm_norflash_data, |
7c6337e2 KH |
97 | }, |
98 | .num_resources = 1, | |
7bff3c4c DB |
99 | .resource = &davinci_evm_norflash_resource, |
100 | }; | |
101 | ||
3e9c18e1 DB |
102 | /* DM644x EVM includes a 64 MByte small-page NAND flash (16K blocks). |
103 | * It may used instead of the (default) NOR chip to boot, using TI's | |
104 | * tools to install the secondary boot loader (UBL) and U-Boot. | |
105 | */ | |
28552c2e | 106 | static struct mtd_partition davinci_evm_nandflash_partition[] = { |
3e9c18e1 DB |
107 | /* Bootloader layout depends on whose u-boot is installed, but we |
108 | * can hide all the details. | |
109 | * - block 0 for u-boot environment ... in mainline u-boot | |
110 | * - block 1 for UBL (plus up to four backup copies in blocks 2..5) | |
111 | * - blocks 6...? for u-boot | |
112 | * - blocks 16..23 for u-boot environment ... in TI's u-boot | |
113 | */ | |
114 | { | |
115 | .name = "bootloader", | |
116 | .offset = 0, | |
117 | .size = SZ_256K + SZ_128K, | |
118 | .mask_flags = MTD_WRITEABLE, /* force read-only */ | |
119 | }, | |
120 | /* Kernel */ | |
d0e47fba | 121 | { |
3e9c18e1 DB |
122 | .name = "kernel", |
123 | .offset = MTDPART_OFS_APPEND, | |
124 | .size = SZ_4M, | |
125 | .mask_flags = 0, | |
126 | }, | |
127 | /* File system (older GIT kernels started this on the 5MB mark) */ | |
128 | { | |
129 | .name = "filesystem", | |
130 | .offset = MTDPART_OFS_APPEND, | |
d0e47fba KH |
131 | .size = MTDPART_SIZ_FULL, |
132 | .mask_flags = 0, | |
133 | } | |
3e9c18e1 DB |
134 | /* A few blocks at end hold a flash BBT ... created by TI's CCS |
135 | * using flashwriter_nand.out, but ignored by TI's versions of | |
136 | * Linux and u-boot. We boot faster by using them. | |
137 | */ | |
d0e47fba | 138 | }; |
7bff3c4c | 139 | |
d0e47fba KH |
140 | static struct davinci_nand_pdata davinci_evm_nandflash_data = { |
141 | .parts = davinci_evm_nandflash_partition, | |
142 | .nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition), | |
143 | .ecc_mode = NAND_ECC_HW, | |
3e9c18e1 | 144 | .options = NAND_USE_FLASH_BBT, |
d0e47fba KH |
145 | }; |
146 | ||
147 | static struct resource davinci_evm_nandflash_resource[] = { | |
148 | { | |
70342174 SS |
149 | .start = DM644X_ASYNC_EMIF_DATA_CE0_BASE, |
150 | .end = DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, | |
d0e47fba KH |
151 | .flags = IORESOURCE_MEM, |
152 | }, { | |
70342174 SS |
153 | .start = DM644X_ASYNC_EMIF_CONTROL_BASE, |
154 | .end = DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, | |
d0e47fba KH |
155 | .flags = IORESOURCE_MEM, |
156 | }, | |
157 | }; | |
158 | ||
159 | static struct platform_device davinci_evm_nandflash_device = { | |
160 | .name = "davinci_nand", | |
161 | .id = 0, | |
162 | .dev = { | |
163 | .platform_data = &davinci_evm_nandflash_data, | |
164 | }, | |
165 | .num_resources = ARRAY_SIZE(davinci_evm_nandflash_resource), | |
166 | .resource = davinci_evm_nandflash_resource, | |
167 | }; | |
168 | ||
3e9c18e1 | 169 | static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32); |
d0e47fba KH |
170 | |
171 | static struct platform_device davinci_fb_device = { | |
172 | .name = "davincifb", | |
173 | .id = -1, | |
174 | .dev = { | |
175 | .dma_mask = &davinci_fb_dma_mask, | |
3e9c18e1 | 176 | .coherent_dma_mask = DMA_BIT_MASK(32), |
d0e47fba KH |
177 | }, |
178 | .num_resources = 0, | |
179 | }; | |
180 | ||
ab8e8df8 MK |
181 | static struct tvp514x_platform_data tvp5146_pdata = { |
182 | .clk_polarity = 0, | |
183 | .hs_polarity = 1, | |
184 | .vs_polarity = 1 | |
185 | }; | |
186 | ||
187 | #define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) | |
188 | /* Inputs available at the TVP5146 */ | |
189 | static struct v4l2_input tvp5146_inputs[] = { | |
190 | { | |
191 | .index = 0, | |
192 | .name = "Composite", | |
193 | .type = V4L2_INPUT_TYPE_CAMERA, | |
194 | .std = TVP514X_STD_ALL, | |
195 | }, | |
196 | { | |
197 | .index = 1, | |
198 | .name = "S-Video", | |
199 | .type = V4L2_INPUT_TYPE_CAMERA, | |
200 | .std = TVP514X_STD_ALL, | |
201 | }, | |
202 | }; | |
203 | ||
204 | /* | |
205 | * this is the route info for connecting each input to decoder | |
206 | * ouput that goes to vpfe. There is a one to one correspondence | |
207 | * with tvp5146_inputs | |
208 | */ | |
209 | static struct vpfe_route tvp5146_routes[] = { | |
210 | { | |
211 | .input = INPUT_CVBS_VI2B, | |
212 | .output = OUTPUT_10BIT_422_EMBEDDED_SYNC, | |
213 | }, | |
214 | { | |
215 | .input = INPUT_SVIDEO_VI2C_VI1C, | |
216 | .output = OUTPUT_10BIT_422_EMBEDDED_SYNC, | |
217 | }, | |
218 | }; | |
219 | ||
220 | static struct vpfe_subdev_info vpfe_sub_devs[] = { | |
221 | { | |
222 | .name = "tvp5146", | |
223 | .grp_id = 0, | |
224 | .num_inputs = ARRAY_SIZE(tvp5146_inputs), | |
225 | .inputs = tvp5146_inputs, | |
226 | .routes = tvp5146_routes, | |
227 | .can_route = 1, | |
228 | .ccdc_if_params = { | |
229 | .if_type = VPFE_BT656, | |
230 | .hdpol = VPFE_PINPOL_POSITIVE, | |
231 | .vdpol = VPFE_PINPOL_POSITIVE, | |
232 | }, | |
233 | .board_info = { | |
234 | I2C_BOARD_INFO("tvp5146", 0x5d), | |
235 | .platform_data = &tvp5146_pdata, | |
236 | }, | |
237 | }, | |
238 | }; | |
239 | ||
240 | static struct vpfe_config vpfe_cfg = { | |
241 | .num_subdevs = ARRAY_SIZE(vpfe_sub_devs), | |
077639f4 | 242 | .i2c_adapter_id = 1, |
ab8e8df8 MK |
243 | .sub_devs = vpfe_sub_devs, |
244 | .card_name = "DM6446 EVM", | |
245 | .ccdc = "DM6446 CCDC", | |
246 | }; | |
247 | ||
d0e47fba KH |
248 | static struct platform_device rtc_dev = { |
249 | .name = "rtc_davinci_evm", | |
250 | .id = -1, | |
251 | }; | |
7bff3c4c | 252 | |
61aa0732 | 253 | static struct snd_platform_data dm644x_evm_snd_data; |
25acf553 | 254 | |
7bff3c4c DB |
255 | /*----------------------------------------------------------------------*/ |
256 | ||
257 | /* | |
258 | * I2C GPIO expanders | |
259 | */ | |
260 | ||
261 | #define PCF_Uxx_BASE(x) (DAVINCI_N_GPIO + ((x) * 8)) | |
262 | ||
263 | ||
264 | /* U2 -- LEDs */ | |
265 | ||
266 | static struct gpio_led evm_leds[] = { | |
267 | { .name = "DS8", .active_low = 1, | |
268 | .default_trigger = "heartbeat", }, | |
269 | { .name = "DS7", .active_low = 1, }, | |
270 | { .name = "DS6", .active_low = 1, }, | |
271 | { .name = "DS5", .active_low = 1, }, | |
272 | { .name = "DS4", .active_low = 1, }, | |
273 | { .name = "DS3", .active_low = 1, }, | |
274 | { .name = "DS2", .active_low = 1, | |
275 | .default_trigger = "mmc0", }, | |
276 | { .name = "DS1", .active_low = 1, | |
277 | .default_trigger = "ide-disk", }, | |
278 | }; | |
279 | ||
280 | static const struct gpio_led_platform_data evm_led_data = { | |
281 | .num_leds = ARRAY_SIZE(evm_leds), | |
282 | .leds = evm_leds, | |
283 | }; | |
284 | ||
285 | static struct platform_device *evm_led_dev; | |
286 | ||
287 | static int | |
288 | evm_led_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) | |
289 | { | |
290 | struct gpio_led *leds = evm_leds; | |
291 | int status; | |
292 | ||
293 | while (ngpio--) { | |
294 | leds->gpio = gpio++; | |
295 | leds++; | |
296 | } | |
297 | ||
298 | /* what an extremely annoying way to be forced to handle | |
299 | * device unregistration ... | |
300 | */ | |
301 | evm_led_dev = platform_device_alloc("leds-gpio", 0); | |
302 | platform_device_add_data(evm_led_dev, | |
303 | &evm_led_data, sizeof evm_led_data); | |
304 | ||
305 | evm_led_dev->dev.parent = &client->dev; | |
306 | status = platform_device_add(evm_led_dev); | |
307 | if (status < 0) { | |
308 | platform_device_put(evm_led_dev); | |
309 | evm_led_dev = NULL; | |
310 | } | |
311 | return status; | |
312 | } | |
313 | ||
314 | static int | |
315 | evm_led_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) | |
316 | { | |
317 | if (evm_led_dev) { | |
318 | platform_device_unregister(evm_led_dev); | |
319 | evm_led_dev = NULL; | |
320 | } | |
321 | return 0; | |
322 | } | |
323 | ||
324 | static struct pcf857x_platform_data pcf_data_u2 = { | |
325 | .gpio_base = PCF_Uxx_BASE(0), | |
326 | .setup = evm_led_setup, | |
327 | .teardown = evm_led_teardown, | |
328 | }; | |
329 | ||
330 | ||
331 | /* U18 - A/V clock generator and user switch */ | |
332 | ||
333 | static int sw_gpio; | |
334 | ||
335 | static ssize_t | |
336 | sw_show(struct device *d, struct device_attribute *a, char *buf) | |
337 | { | |
338 | char *s = gpio_get_value_cansleep(sw_gpio) ? "on\n" : "off\n"; | |
339 | ||
340 | strcpy(buf, s); | |
341 | return strlen(s); | |
342 | } | |
343 | ||
344 | static DEVICE_ATTR(user_sw, S_IRUGO, sw_show, NULL); | |
345 | ||
346 | static int | |
347 | evm_u18_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) | |
348 | { | |
349 | int status; | |
350 | ||
351 | /* export dip switch option */ | |
352 | sw_gpio = gpio + 7; | |
353 | status = gpio_request(sw_gpio, "user_sw"); | |
354 | if (status == 0) | |
355 | status = gpio_direction_input(sw_gpio); | |
356 | if (status == 0) | |
357 | status = device_create_file(&client->dev, &dev_attr_user_sw); | |
358 | else | |
359 | gpio_free(sw_gpio); | |
360 | if (status != 0) | |
361 | sw_gpio = -EINVAL; | |
362 | ||
363 | /* audio PLL: 48 kHz (vs 44.1 or 32), single rate (vs double) */ | |
364 | gpio_request(gpio + 3, "pll_fs2"); | |
365 | gpio_direction_output(gpio + 3, 0); | |
366 | ||
367 | gpio_request(gpio + 2, "pll_fs1"); | |
368 | gpio_direction_output(gpio + 2, 0); | |
369 | ||
370 | gpio_request(gpio + 1, "pll_sr"); | |
371 | gpio_direction_output(gpio + 1, 0); | |
372 | ||
373 | return 0; | |
374 | } | |
375 | ||
376 | static int | |
377 | evm_u18_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) | |
378 | { | |
379 | gpio_free(gpio + 1); | |
380 | gpio_free(gpio + 2); | |
381 | gpio_free(gpio + 3); | |
382 | ||
383 | if (sw_gpio > 0) { | |
384 | device_remove_file(&client->dev, &dev_attr_user_sw); | |
385 | gpio_free(sw_gpio); | |
386 | } | |
387 | return 0; | |
388 | } | |
389 | ||
390 | static struct pcf857x_platform_data pcf_data_u18 = { | |
391 | .gpio_base = PCF_Uxx_BASE(1), | |
392 | .n_latch = (1 << 3) | (1 << 2) | (1 << 1), | |
393 | .setup = evm_u18_setup, | |
394 | .teardown = evm_u18_teardown, | |
7c6337e2 KH |
395 | }; |
396 | ||
7bff3c4c DB |
397 | |
398 | /* U35 - various I/O signals used to manage USB, CF, ATA, etc */ | |
399 | ||
400 | static int | |
401 | evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) | |
402 | { | |
403 | /* p0 = nDRV_VBUS (initial: don't supply it) */ | |
404 | gpio_request(gpio + 0, "nDRV_VBUS"); | |
405 | gpio_direction_output(gpio + 0, 1); | |
406 | ||
407 | /* p1 = VDDIMX_EN */ | |
408 | gpio_request(gpio + 1, "VDDIMX_EN"); | |
409 | gpio_direction_output(gpio + 1, 1); | |
410 | ||
411 | /* p2 = VLYNQ_EN */ | |
412 | gpio_request(gpio + 2, "VLYNQ_EN"); | |
413 | gpio_direction_output(gpio + 2, 1); | |
414 | ||
415 | /* p3 = n3V3_CF_RESET (initial: stay in reset) */ | |
416 | gpio_request(gpio + 3, "nCF_RESET"); | |
417 | gpio_direction_output(gpio + 3, 0); | |
418 | ||
419 | /* (p4 unused) */ | |
420 | ||
421 | /* p5 = 1V8_WLAN_RESET (initial: stay in reset) */ | |
422 | gpio_request(gpio + 5, "WLAN_RESET"); | |
423 | gpio_direction_output(gpio + 5, 1); | |
424 | ||
425 | /* p6 = nATA_SEL (initial: select) */ | |
426 | gpio_request(gpio + 6, "nATA_SEL"); | |
427 | gpio_direction_output(gpio + 6, 0); | |
428 | ||
429 | /* p7 = nCF_SEL (initial: deselect) */ | |
430 | gpio_request(gpio + 7, "nCF_SEL"); | |
431 | gpio_direction_output(gpio + 7, 1); | |
432 | ||
d0e47fba KH |
433 | /* irlml6401 switches over 1A, in under 8 msec; |
434 | * now it can be managed by nDRV_VBUS ... | |
435 | */ | |
355fb4e3 | 436 | davinci_setup_usb(1000, 8); |
34f32c97 | 437 | |
7bff3c4c DB |
438 | return 0; |
439 | } | |
440 | ||
441 | static int | |
442 | evm_u35_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) | |
443 | { | |
444 | gpio_free(gpio + 7); | |
445 | gpio_free(gpio + 6); | |
446 | gpio_free(gpio + 5); | |
447 | gpio_free(gpio + 3); | |
448 | gpio_free(gpio + 2); | |
449 | gpio_free(gpio + 1); | |
450 | gpio_free(gpio + 0); | |
451 | return 0; | |
452 | } | |
453 | ||
454 | static struct pcf857x_platform_data pcf_data_u35 = { | |
455 | .gpio_base = PCF_Uxx_BASE(2), | |
456 | .setup = evm_u35_setup, | |
457 | .teardown = evm_u35_teardown, | |
458 | }; | |
459 | ||
460 | /*----------------------------------------------------------------------*/ | |
461 | ||
462 | /* Most of this EEPROM is unused, but U-Boot uses some data: | |
463 | * - 0x7f00, 6 bytes Ethernet Address | |
464 | * - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL) | |
465 | * - ... newer boards may have more | |
466 | */ | |
d0e47fba | 467 | |
7bff3c4c DB |
468 | static struct at24_platform_data eeprom_info = { |
469 | .byte_len = (256*1024) / 8, | |
470 | .page_size = 64, | |
471 | .flags = AT24_FLAG_ADDR16, | |
b14dc0f9 MG |
472 | .setup = davinci_get_mac_addr, |
473 | .context = (void *)0x7f00, | |
d0e47fba KH |
474 | }; |
475 | ||
d0e47fba KH |
476 | /* |
477 | * MSP430 supports RTC, card detection, input from IR remote, and | |
478 | * a bit more. It triggers interrupts on GPIO(7) from pressing | |
479 | * buttons on the IR remote, and for card detect switches. | |
480 | */ | |
481 | static struct i2c_client *dm6446evm_msp; | |
482 | ||
483 | static int dm6446evm_msp_probe(struct i2c_client *client, | |
484 | const struct i2c_device_id *id) | |
485 | { | |
486 | dm6446evm_msp = client; | |
487 | return 0; | |
488 | } | |
489 | ||
490 | static int dm6446evm_msp_remove(struct i2c_client *client) | |
491 | { | |
492 | dm6446evm_msp = NULL; | |
493 | return 0; | |
494 | } | |
495 | ||
496 | static const struct i2c_device_id dm6446evm_msp_ids[] = { | |
497 | { "dm6446evm_msp", 0, }, | |
498 | { /* end of list */ }, | |
499 | }; | |
500 | ||
501 | static struct i2c_driver dm6446evm_msp_driver = { | |
502 | .driver.name = "dm6446evm_msp", | |
503 | .id_table = dm6446evm_msp_ids, | |
504 | .probe = dm6446evm_msp_probe, | |
505 | .remove = dm6446evm_msp_remove, | |
7bff3c4c DB |
506 | }; |
507 | ||
d0e47fba KH |
508 | static int dm6444evm_msp430_get_pins(void) |
509 | { | |
510 | static const char txbuf[2] = { 2, 4, }; | |
511 | char buf[4]; | |
512 | struct i2c_msg msg[2] = { | |
513 | { | |
514 | .addr = dm6446evm_msp->addr, | |
515 | .flags = 0, | |
516 | .len = 2, | |
517 | .buf = (void __force *)txbuf, | |
518 | }, | |
519 | { | |
520 | .addr = dm6446evm_msp->addr, | |
521 | .flags = I2C_M_RD, | |
522 | .len = 4, | |
523 | .buf = buf, | |
524 | }, | |
525 | }; | |
526 | int status; | |
527 | ||
528 | if (!dm6446evm_msp) | |
529 | return -ENXIO; | |
530 | ||
531 | /* Command 4 == get input state, returns port 2 and port3 data | |
532 | * S Addr W [A] len=2 [A] cmd=4 [A] | |
533 | * RS Addr R [A] [len=4] A [cmd=4] A [port2] A [port3] N P | |
534 | */ | |
535 | status = i2c_transfer(dm6446evm_msp->adapter, msg, 2); | |
536 | if (status < 0) | |
537 | return status; | |
538 | ||
539 | dev_dbg(&dm6446evm_msp->dev, | |
540 | "PINS: %02x %02x %02x %02x\n", | |
541 | buf[0], buf[1], buf[2], buf[3]); | |
542 | ||
543 | return (buf[3] << 8) | buf[2]; | |
544 | } | |
545 | ||
2dbf56ae KH |
546 | static int dm6444evm_mmc_get_cd(int module) |
547 | { | |
548 | int status = dm6444evm_msp430_get_pins(); | |
549 | ||
550 | return (status < 0) ? status : !(status & BIT(1)); | |
551 | } | |
552 | ||
553 | static int dm6444evm_mmc_get_ro(int module) | |
554 | { | |
555 | int status = dm6444evm_msp430_get_pins(); | |
556 | ||
557 | return (status < 0) ? status : status & BIT(6 + 8); | |
558 | } | |
559 | ||
560 | static struct davinci_mmc_config dm6446evm_mmc_config = { | |
561 | .get_cd = dm6444evm_mmc_get_cd, | |
562 | .get_ro = dm6444evm_mmc_get_ro, | |
563 | .wires = 4, | |
564 | .version = MMC_CTLR_VERSION_1 | |
565 | }; | |
566 | ||
7bff3c4c | 567 | static struct i2c_board_info __initdata i2c_info[] = { |
d0e47fba KH |
568 | { |
569 | I2C_BOARD_INFO("dm6446evm_msp", 0x23), | |
570 | }, | |
7bff3c4c DB |
571 | { |
572 | I2C_BOARD_INFO("pcf8574", 0x38), | |
573 | .platform_data = &pcf_data_u2, | |
574 | }, | |
575 | { | |
576 | I2C_BOARD_INFO("pcf8574", 0x39), | |
577 | .platform_data = &pcf_data_u18, | |
578 | }, | |
579 | { | |
580 | I2C_BOARD_INFO("pcf8574", 0x3a), | |
581 | .platform_data = &pcf_data_u35, | |
582 | }, | |
583 | { | |
584 | I2C_BOARD_INFO("24c256", 0x50), | |
585 | .platform_data = &eeprom_info, | |
586 | }, | |
1a7ff8ff C |
587 | { |
588 | I2C_BOARD_INFO("tlv320aic33", 0x1b), | |
589 | }, | |
7bff3c4c DB |
590 | }; |
591 | ||
592 | /* The msp430 uses a slow bitbanged I2C implementation (ergo 20 KHz), | |
593 | * which requires 100 usec of idle bus after i2c writes sent to it. | |
594 | */ | |
595 | static struct davinci_i2c_platform_data i2c_pdata = { | |
596 | .bus_freq = 20 /* kHz */, | |
597 | .bus_delay = 100 /* usec */, | |
00642f66 PJ |
598 | .sda_pin = 44, |
599 | .scl_pin = 43, | |
7bff3c4c DB |
600 | }; |
601 | ||
602 | static void __init evm_init_i2c(void) | |
603 | { | |
604 | davinci_init_i2c(&i2c_pdata); | |
d0e47fba | 605 | i2c_add_driver(&dm6446evm_msp_driver); |
7bff3c4c DB |
606 | i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); |
607 | } | |
608 | ||
7c6337e2 | 609 | static struct platform_device *davinci_evm_devices[] __initdata = { |
d0e47fba KH |
610 | &davinci_fb_device, |
611 | &rtc_dev, | |
612 | }; | |
613 | ||
614 | static struct davinci_uart_config uart_config __initdata = { | |
615 | .enabled_uarts = (1 << 0), | |
7c6337e2 KH |
616 | }; |
617 | ||
618 | static void __init | |
619 | davinci_evm_map_io(void) | |
620 | { | |
ab8e8df8 MK |
621 | /* setup input configuration for VPFE input devices */ |
622 | dm644x_set_vpfe_config(&vpfe_cfg); | |
d0e47fba | 623 | dm644x_init(); |
7c6337e2 KH |
624 | } |
625 | ||
d0e47fba | 626 | static int davinci_phy_fixup(struct phy_device *phydev) |
7c6337e2 | 627 | { |
d0e47fba KH |
628 | unsigned int control; |
629 | /* CRITICAL: Fix for increasing PHY signal drive strength for | |
630 | * TX lockup issue. On DaVinci EVM, the Intel LXT971 PHY | |
631 | * signal strength was low causing TX to fail randomly. The | |
632 | * fix is to Set bit 11 (Increased MII drive strength) of PHY | |
633 | * register 26 (Digital Config register) on this phy. */ | |
634 | control = phy_read(phydev, 26); | |
635 | phy_write(phydev, 26, (control | 0x800)); | |
636 | return 0; | |
637 | } | |
638 | ||
7bff3c4c DB |
639 | #if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ |
640 | defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) | |
d0e47fba KH |
641 | #define HAS_ATA 1 |
642 | #else | |
643 | #define HAS_ATA 0 | |
644 | #endif | |
645 | ||
7bff3c4c DB |
646 | #if defined(CONFIG_MTD_PHYSMAP) || \ |
647 | defined(CONFIG_MTD_PHYSMAP_MODULE) | |
d0e47fba KH |
648 | #define HAS_NOR 1 |
649 | #else | |
650 | #define HAS_NOR 0 | |
7bff3c4c | 651 | #endif |
d0e47fba KH |
652 | |
653 | #if defined(CONFIG_MTD_NAND_DAVINCI) || \ | |
654 | defined(CONFIG_MTD_NAND_DAVINCI_MODULE) | |
655 | #define HAS_NAND 1 | |
656 | #else | |
657 | #define HAS_NAND 0 | |
7c6337e2 KH |
658 | #endif |
659 | ||
d0e47fba KH |
660 | static __init void davinci_evm_init(void) |
661 | { | |
662 | struct clk *aemif_clk; | |
972412b6 | 663 | struct davinci_soc_info *soc_info = &davinci_soc_info; |
d0e47fba KH |
664 | |
665 | aemif_clk = clk_get(NULL, "aemif"); | |
666 | clk_enable(aemif_clk); | |
667 | ||
668 | if (HAS_ATA) { | |
669 | if (HAS_NAND || HAS_NOR) | |
670 | pr_warning("WARNING: both IDE and Flash are " | |
671 | "enabled, but they share AEMIF pins.\n" | |
672 | "\tDisable IDE for NAND/NOR support.\n"); | |
7a9978a1 | 673 | davinci_init_ide(); |
d0e47fba KH |
674 | } else if (HAS_NAND || HAS_NOR) { |
675 | davinci_cfg_reg(DM644X_HPIEN_DISABLE); | |
676 | davinci_cfg_reg(DM644X_ATAEN_DISABLE); | |
677 | ||
678 | /* only one device will be jumpered and detected */ | |
679 | if (HAS_NAND) { | |
680 | platform_device_register(&davinci_evm_nandflash_device); | |
681 | evm_leds[7].default_trigger = "nand-disk"; | |
682 | if (HAS_NOR) | |
683 | pr_warning("WARNING: both NAND and NOR flash " | |
684 | "are enabled; disable one of them.\n"); | |
685 | } else if (HAS_NOR) | |
686 | platform_device_register(&davinci_evm_norflash_device); | |
687 | } | |
688 | ||
7c6337e2 KH |
689 | platform_add_devices(davinci_evm_devices, |
690 | ARRAY_SIZE(davinci_evm_devices)); | |
7bff3c4c | 691 | evm_init_i2c(); |
d0e47fba | 692 | |
2dbf56ae KH |
693 | davinci_setup_mmc(0, &dm6446evm_mmc_config); |
694 | ||
d0e47fba | 695 | davinci_serial_init(&uart_config); |
25acf553 | 696 | dm644x_init_asp(&dm644x_evm_snd_data); |
d0e47fba | 697 | |
972412b6 MG |
698 | soc_info->emac_pdata->phy_mask = DM644X_EVM_PHY_MASK; |
699 | soc_info->emac_pdata->mdio_max_freq = DM644X_EVM_MDIO_FREQUENCY; | |
ac7b75b5 | 700 | |
d0e47fba KH |
701 | /* Register the fixup for PHY on DaVinci */ |
702 | phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK, | |
703 | davinci_phy_fixup); | |
704 | ||
7c6337e2 KH |
705 | } |
706 | ||
d0e47fba | 707 | MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM") |
7c6337e2 KH |
708 | /* Maintainer: MontaVista Software <source@mvista.com> */ |
709 | .phys_io = IO_PHYS, | |
ac7643e4 | 710 | .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, |
7c6337e2 KH |
711 | .boot_params = (DAVINCI_DDR_BASE + 0x100), |
712 | .map_io = davinci_evm_map_io, | |
bd808947 | 713 | .init_irq = davinci_irq_init, |
7c6337e2 KH |
714 | .timer = &davinci_timer, |
715 | .init_machine = davinci_evm_init, | |
716 | MACHINE_END |