projects / linux-block.git / blame
| Commit | Line | Data |
|---|---|---|
| b2441318 | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 640a7af5 LD |
2 | /dts-v1/; |
| 3 | ||
| 1bd0bd49 | 4 | #include "tegra30-cardhu.dtsi" |
| 640a7af5 LD |
5 | |
| 6 | /* This dts file support the cardhu A04 and later versions of board */ | |
| 7 | ||
| 8 | / { | |
| 9 | model = "NVIDIA Tegra30 Cardhu A04 (A05, A06, A07) evaluation board"; | |
| 10 | compatible = "nvidia,cardhu-a04", "nvidia,cardhu", "nvidia,tegra30"; | |
| fa4a9252 | 11 | |
| 57899053 SW |
12 | sdhci@78000400 { |
| 13 | status = "okay"; | |
| 14 | power-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>; | |
| 15 | bus-width = <4>; | |
| 16 | keep-power-in-suspend; | |
| 17 | }; | |
| 18 | ||
| fa4a9252 LD |
19 | regulators { |
| 20 | compatible = "simple-bus"; | |
| 21 | #address-cells = <1>; | |
| 22 | #size-cells = <0>; | |
| 23 | ||
| 24 | ddr_reg: regulator@100 { | |
| 25 | compatible = "regulator-fixed"; | |
| 26 | regulator-name = "ddr"; | |
| 27 | reg = <100>; | |
| 28 | regulator-min-microvolt = <1500000>; | |
| 29 | regulator-max-microvolt = <1500000>; | |
| 30 | regulator-always-on; | |
| 31 | regulator-boot-on; | |
| 32 | enable-active-high; | |
| 3325f1bc | 33 | gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; |
| fa4a9252 LD |
34 | }; |
| 35 | ||
| 36 | sys_3v3_reg: regulator@101 { | |
| 37 | compatible = "regulator-fixed"; | |
| 38 | reg = <101>; | |
| 39 | regulator-name = "sys_3v3"; | |
| 40 | regulator-min-microvolt = <3300000>; | |
| 41 | regulator-max-microvolt = <3300000>; | |
| 42 | regulator-always-on; | |
| 43 | regulator-boot-on; | |
| 44 | enable-active-high; | |
| 3325f1bc | 45 | gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; |
| fa4a9252 LD |
46 | }; |
| 47 | ||
| 48 | usb1_vbus_reg: regulator@102 { | |
| 49 | compatible = "regulator-fixed"; | |
| 50 | reg = <102>; | |
| 51 | regulator-name = "usb1_vbus"; | |
| 52 | regulator-min-microvolt = <5000000>; | |
| 53 | regulator-max-microvolt = <5000000>; | |
| 54 | enable-active-high; | |
| 3325f1bc | 55 | gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>; |
| fa4a9252 LD |
56 | gpio-open-drain; |
| 57 | vin-supply = <&vdd_5v0_reg>; | |
| 58 | }; | |
| 59 | ||
| 60 | usb3_vbus_reg: regulator@103 { | |
| 61 | compatible = "regulator-fixed"; | |
| 62 | reg = <103>; | |
| 63 | regulator-name = "usb3_vbus"; | |
| 64 | regulator-min-microvolt = <5000000>; | |
| 65 | regulator-max-microvolt = <5000000>; | |
| 66 | enable-active-high; | |
| 3325f1bc | 67 | gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>; |
| fa4a9252 LD |
68 | gpio-open-drain; |
| 69 | vin-supply = <&vdd_5v0_reg>; | |
| 70 | }; | |
| 71 | ||
| 72 | vdd_5v0_reg: regulator@104 { | |
| 73 | compatible = "regulator-fixed"; | |
| 74 | reg = <104>; | |
| 75 | regulator-name = "5v0"; | |
| 76 | regulator-min-microvolt = <5000000>; | |
| 77 | regulator-max-microvolt = <5000000>; | |
| 78 | enable-active-high; | |
| 3325f1bc | 79 | gpio = <&pmic 8 GPIO_ACTIVE_HIGH>; |
| fa4a9252 LD |
80 | }; |
| 81 | ||
| 82 | vdd_bl_reg: regulator@105 { | |
| 83 | compatible = "regulator-fixed"; | |
| 84 | reg = <105>; | |
| 85 | regulator-name = "vdd_bl"; | |
| 86 | regulator-min-microvolt = <5000000>; | |
| 87 | regulator-max-microvolt = <5000000>; | |
| 88 | regulator-always-on; | |
| 89 | regulator-boot-on; | |
| 90 | enable-active-high; | |
| 3325f1bc | 91 | gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>; |
| fa4a9252 LD |
92 | }; |
| 93 | ||
| 94 | vdd_bl2_reg: regulator@106 { | |
| 95 | compatible = "regulator-fixed"; | |
| 96 | reg = <106>; | |
| 97 | regulator-name = "vdd_bl2"; | |
| 98 | regulator-min-microvolt = <5000000>; | |
| 99 | regulator-max-microvolt = <5000000>; | |
| 100 | regulator-always-on; | |
| 101 | regulator-boot-on; | |
| 102 | enable-active-high; | |
| 3325f1bc | 103 | gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>; |
| fa4a9252 LD |
104 | }; |
| 105 | }; | |
| 640a7af5 | 106 | }; |