ARM: tegra: Adjust whitespace around '='
[linux-2.6-block.git] / arch / arm / boot / dts / tegra124-apalis-v1.2-eval.dts
CommitLineData
4a28f634 1// SPDX-License-Identifier: GPL-2.0 OR MIT
4957a2f1
MZ
2/*
3 * Copyright 2016-2018 Toradex AG
4 */
5
6/dts-v1/;
7
8#include <dt-bindings/input/input.h>
9#include "tegra124-apalis-v1.2.dtsi"
10
11/ {
12 model = "Toradex Apalis TK1 on Apalis Evaluation Board";
13 compatible = "toradex,apalis-tk1-v1.2-eval", "toradex,apalis-tk1-eval",
a052d2b6
MZ
14 "toradex,apalis-tk1-v1.2", "toradex,apalis-tk1",
15 "nvidia,tegra124";
4957a2f1
MZ
16
17 aliases {
18 rtc0 = "/i2c@7000c000/rtc@68";
19 rtc1 = "/i2c@7000d000/pmic@40";
20 rtc2 = "/rtc@7000e000";
21 serial0 = &uarta;
22 serial1 = &uartb;
23 serial2 = &uartc;
24 serial3 = &uartd;
25 };
26
27 chosen {
28 stdout-path = "serial0:115200n8";
29 };
30
31 pcie@1003000 {
32 pci@1,0 {
33 status = "okay";
34 };
35 };
36
37 host1x@50000000 {
38 hdmi@54280000 {
39 status = "okay";
8c3a9d21 40 hdmi-supply = <&reg_5v0>;
4957a2f1
MZ
41 };
42 };
43
44 /* Apalis UART1 */
45 serial@70006000 {
46 status = "okay";
47 };
48
49 /* Apalis UART2 */
50 serial@70006040 {
51 status = "okay";
52 };
53
54 /* Apalis UART3 */
55 serial@70006200 {
56 status = "okay";
57 };
58
59 /* Apalis UART4 */
60 serial@70006300 {
61 status = "okay";
62 };
63
64 pwm@7000a000 {
65 status = "okay";
66 };
67
68 /*
69 * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
70 * board)
71 */
72 i2c@7000c000 {
73 status = "okay";
74 clock-frequency = <400000>;
75
76 pcie-switch@58 {
77 compatible = "plx,pex8605";
78 reg = <0x58>;
79 };
80
81 /* M41T0M6 real time clock on carrier board */
82 rtc@68 {
83 compatible = "st,m41t0";
84 reg = <0x68>;
85 };
86 };
87
88 /* GEN2_I2C: unused */
89
90 /*
91 * CAM_I2C: I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor
92 * on carrier board)
93 */
94 i2c@7000c500 {
95 status = "okay";
96 clock-frequency = <400000>;
97 };
98
99 /*
100 * I2C4 (DDC): I2C4_SDA/SCL (DDC) on MXM3 pin 205/207
101 * (e.g. display EDID)
102 */
4b601b9f 103 i2c@7000c700 {
4957a2f1
MZ
104 status = "okay";
105 };
106
107 /* SPI1: Apalis SPI1 */
108 spi@7000d400 {
109 status = "okay";
110 spi-max-frequency = <50000000>;
4957a2f1
MZ
111 };
112
113 /* SPI4: Apalis SPI2 */
114 spi@7000da00 {
115 status = "okay";
116 spi-max-frequency = <50000000>;
4957a2f1
MZ
117 };
118
119 /* Apalis Serial ATA */
120 sata@70020000 {
121 status = "okay";
8c3a9d21
MZ
122 target-5v-supply = <&reg_5v0>;
123 target-12v-supply = <&reg_12v0>;
4957a2f1
MZ
124 };
125
126 hda@70030000 {
127 status = "okay";
128 };
129
130 usb@70090000 {
131 status = "okay";
132 };
133
134 /* Apalis MMC1 */
32c096c2 135 mmc@700b0000 {
4957a2f1 136 status = "okay";
a64b51a3 137 bus-width = <4>;
4957a2f1
MZ
138 /* MMC1_CD# */
139 cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
4957a2f1
MZ
140 vqmmc-supply = <&vddio_sdmmc1>;
141 };
142
143 /* Apalis SD1 */
32c096c2 144 mmc@700b0400 {
4957a2f1 145 status = "okay";
a64b51a3 146 bus-width = <4>;
4957a2f1
MZ
147 /* SD1_CD# */
148 cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
4957a2f1
MZ
149 vqmmc-supply = <&vddio_sdmmc3>;
150 };
151
152 /* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
153 usb@7d000000 {
154 status = "okay";
155 dr_mode = "otg";
156 };
157
158 usb-phy@7d000000 {
159 status = "okay";
160 vbus-supply = <&reg_usbo1_vbus>;
161 };
162
163 /* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
164 usb@7d004000 {
165 status = "okay";
166 };
167
168 usb-phy@7d004000 {
169 status = "okay";
170 vbus-supply = <&reg_usbh_vbus>;
171 };
172
173 /* EHCI instance 2: USB3_DP/N -> USBH4_DP/N */
174 usb@7d008000 {
175 status = "okay";
176 };
177
178 usb-phy@7d008000 {
179 status = "okay";
180 vbus-supply = <&reg_usbh_vbus>;
181 };
182
183 backlight: backlight {
184 compatible = "pwm-backlight";
4957a2f1
MZ
185 brightness-levels = <255 231 223 207 191 159 127 0>;
186 default-brightness-level = <6>;
187 /* BKL1_ON */
188 enable-gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_HIGH>;
8c3a9d21 189 power-supply = <&reg_3v3>;
958b767d 190 pwms = <&pwm 3 5000000>; /* BKL1_PWM */
4957a2f1
MZ
191 };
192
193 gpio-keys {
194 compatible = "gpio-keys";
195
196 wakeup {
197 label = "WAKE1_MICO";
198 gpios = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_LOW>;
199 linux,code = <KEY_WAKEUP>;
200 debounce-interval = <10>;
201 wakeup-source;
202 };
203 };
204
8c3a9d21
MZ
205 reg_3v3: regulator-3v3 {
206 compatible = "regulator-fixed";
207 regulator-name = "3.3V_SW";
208 regulator-min-microvolt = <3300000>;
209 regulator-max-microvolt = <3300000>;
210 };
211
4957a2f1
MZ
212 reg_5v0: regulator-5v0 {
213 compatible = "regulator-fixed";
214 regulator-name = "5V_SW";
215 regulator-min-microvolt = <5000000>;
216 regulator-max-microvolt = <5000000>;
217 };
218
8c3a9d21
MZ
219 reg_12v0: regulator-12v0 {
220 compatible = "regulator-fixed";
221 regulator-name = "12V_SW";
222 regulator-min-microvolt = <12000000>;
223 regulator-max-microvolt = <12000000>;
224 };
225
4957a2f1
MZ
226 /* USBO1_EN */
227 reg_usbo1_vbus: regulator-usbo1-vbus {
228 compatible = "regulator-fixed";
229 regulator-name = "VCC_USBO1";
230 regulator-min-microvolt = <5000000>;
231 regulator-max-microvolt = <5000000>;
232 gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
233 enable-active-high;
234 vin-supply = <&reg_5v0>;
235 };
236
237 /* USBH_EN */
238 reg_usbh_vbus: regulator-usbh-vbus {
239 compatible = "regulator-fixed";
240 regulator-name = "VCC_USBH(2A|2C|2D|3|4)";
241 regulator-min-microvolt = <5000000>;
242 regulator-max-microvolt = <5000000>;
243 gpio = <&gpio TEGRA_GPIO(T, 6) GPIO_ACTIVE_HIGH>;
244 enable-active-high;
245 vin-supply = <&reg_5v0>;
246 };
247};
248
249&gpio {
250 /* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
63658cbc 251 pex-perst-n-hog {
4957a2f1
MZ
252 gpio-hog;
253 gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
254 output-high;
255 line-name = "PEX_PERST_N";
256 };
257};