[linux-2.6-block.git] / arch / arm / boot / dts / sun8i-r40-bananapi-m2-ultra.dts

/*
 * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
 * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This file is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of the
 *     License, or (at your option) any later version.
 *
 *     This file is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 * Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */

/dts-v1/;
#include "sun8i-r40.dtsi"

#include <dt-bindings/gpio/gpio.h>

/ {
	model = "Banana Pi BPI-M2-Ultra";
	compatible = "sinovoip,bpi-m2-ultra", "allwinner,sun8i-r40";

	aliases {
		ethernet0 = &gmac;
		serial0 = &uart0;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	connector {
		compatible = "hdmi-connector";
		type = "a";

		port {
			hdmi_con_in: endpoint {
				remote-endpoint = <&hdmi_out_con>;
			};
		};
	};

	leds {
		compatible = "gpio-leds";

		pwr-led {
			label = "bananapi:red:pwr";
			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
			default-state = "on";
		};

		user-led-green {
			label = "bananapi:green:user";
			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
		};

		user-led-blue {
			label = "bananapi:blue:user";
			gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>;
		};
	};

	reg_vcc5v0: vcc5v0 {
		compatible = "regulator-fixed";
		regulator-name = "vcc5v0";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
		enable-active-high;
	};

	wifi_pwrseq: wifi_pwrseq {
		compatible = "mmc-pwrseq-simple";
		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
		clocks = <&ccu CLK_OUTA>;
		clock-names = "ext_clock";
	};
};

&ahci {
	ahci-supply = <&reg_dldo4>;
	phy-supply = <&reg_eldo3>;
	status = "okay";
};

&de {
	status = "okay";
};

&ehci1 {
	status = "okay";
};

&ehci2 {
	status = "okay";
};

&gmac {
	pinctrl-names = "default";
	pinctrl-0 = <&gmac_rgmii_pins>;
	phy-handle = <&phy1>;
	phy-mode = "rgmii";
	phy-supply = <&reg_dc1sw>;
	status = "okay";
};

&gmac_mdio {
	phy1: ethernet-phy@1 {
		compatible = "ethernet-phy-ieee802.3-c22";
		reg = <1>;
	};
};

&hdmi {
	status = "okay";
};

&hdmi_out {
	hdmi_out_con: endpoint {
		remote-endpoint = <&hdmi_con_in>;
	};
};

&i2c0 {
	status = "okay";

	axp22x: pmic@34 {
		compatible = "x-powers,axp221";
		reg = <0x34>;
		interrupt-parent = <&nmi_intc>;
		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
	};
};

#include "axp22x.dtsi"

&mmc0 {
	vmmc-supply = <&reg_dcdc1>;
	bus-width = <4>;
	cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */
	status = "okay";
};

&mmc1 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc1_pg_pins>;
	vmmc-supply = <&reg_dldo2>;
	vqmmc-supply = <&reg_dldo1>;
	mmc-pwrseq = <&wifi_pwrseq>;
	bus-width = <4>;
	non-removable;
	status = "okay";
};

&mmc2 {
	vmmc-supply = <&reg_dcdc1>;
	vqmmc-supply = <&reg_dcdc1>;
	bus-width = <8>;
	non-removable;
	status = "okay";
};

&ohci1 {
	status = "okay";
};

&ohci2 {
	status = "okay";
};

&pio {
	pinctrl-names = "default";
	pinctrl-0 = <&clk_out_a_pin>;
};

&reg_aldo2 {
	regulator-always-on;
	regulator-min-microvolt = <2500000>;
	regulator-max-microvolt = <2500000>;
	regulator-name = "vcc-pa";
};

&reg_aldo3 {
	regulator-always-on;
	regulator-min-microvolt = <2700000>;
	regulator-max-microvolt = <3300000>;
	regulator-name = "avcc";
};

&reg_dc1sw {
	regulator-min-microvolt = <3000000>;
	regulator-max-microvolt = <3000000>;
	regulator-name = "vcc-gmac-phy";
};

&reg_dcdc1 {
	regulator-always-on;
	regulator-min-microvolt = <3000000>;
	regulator-max-microvolt = <3000000>;
	regulator-name = "vcc-3v0";
};

&reg_dcdc2 {
	regulator-always-on;
	regulator-min-microvolt = <1000000>;
	regulator-max-microvolt = <1300000>;
	regulator-name = "vdd-cpu";
};

&reg_dcdc3 {
	regulator-always-on;
	regulator-min-microvolt = <1000000>;
	regulator-max-microvolt = <1300000>;
	regulator-name = "vdd-sys";
};

&reg_dcdc5 {
	regulator-always-on;
	regulator-min-microvolt = <1500000>;
	regulator-max-microvolt = <1500000>;
	regulator-name = "vcc-dram";
};

&reg_dldo1 {
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <3300000>;
	regulator-name = "vcc-wifi-io";
};

/*
 * Our WiFi chip needs both DLDO2 and DLDO3 to be powered at the same
 * time, with the two being in sync, to be able to meet maximum power
 * consumption during transmits. Since this is not really supported
 * right now, just use the two as always on, and we will fix it later.
 */

&reg_dldo2 {
	regulator-always-on;
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	regulator-name = "vcc-wifi";
};

&reg_dldo3 {
	regulator-always-on;
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	regulator-name = "vcc-wifi-2";
};

&reg_dldo4 {
	regulator-min-microvolt = <2500000>;
	regulator-max-microvolt = <2500000>;
	regulator-name = "vdd2v5-sata";
};

&reg_eldo3 {
	regulator-min-microvolt = <1200000>;
	regulator-max-microvolt = <1200000>;
	regulator-name = "vdd1v2-sata";
};

&tcon_tv0 {
	status = "okay";
};

&uart0 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart0_pb_pins>;
	status = "okay";
};

&uart3 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>;
	uart-has-rtscts;
	status = "okay";

	bluetooth {
		compatible = "brcm,bcm43438-bt";
		clocks = <&ccu CLK_OUTA>;
		clock-names = "lpo";
		vbat-supply = <&reg_dldo2>;
		vddio-supply = <&reg_dldo1>;
		device-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
		/* TODO host wake line connected to PMIC GPIO pins */
		shutdown-gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
		max-speed = <1500000>;
	};
};

&usbphy {
	usb1_vbus-supply = <&reg_vcc5v0>;
	usb2_vbus-supply = <&reg_vcc5v0>;
	status = "okay";
};
Commit	Line	Data
da7ac948 CYT	1	/*
	2	* Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
	3	* Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
	4	*
	5	* This file is dual-licensed: you can use it either under the terms
	6	* of the GPL or the X11 license, at your option. Note that this dual
	7	* licensing only applies to this file, and not this project as a
	8	* whole.
	9	*
	10	* a) This file is free software; you can redistribute it and/or
	11	* modify it under the terms of the GNU General Public License as
	12	* published by the Free Software Foundation; either version 2 of the
	13	* License, or (at your option) any later version.
	14	*
	15	* This file is distributed in the hope that it will be useful,
	16	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	17	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	18	* GNU General Public License for more details.
	19	*
	20	* Or, alternatively,
	21	*
	22	* b) Permission is hereby granted, free of charge, to any person
	23	* obtaining a copy of this software and associated documentation
	24	* files (the "Software"), to deal in the Software without
	25	* restriction, including without limitation the rights to use,
	26	* copy, modify, merge, publish, distribute, sublicense, and/or
	27	* sell copies of the Software, and to permit persons to whom the
	28	* Software is furnished to do so, subject to the following
	29	* conditions:
	30	*
	31	* The above copyright notice and this permission notice shall be
	32	* included in all copies or substantial portions of the Software.
	33	*
	34	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	35	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	36	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	37	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	38	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
	39	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	40	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	41	* OTHER DEALINGS IN THE SOFTWARE.
	42	*/
	43
	44	/dts-v1/;
	45	#include "sun8i-r40.dtsi"
	46
	47	#include <dt-bindings/gpio/gpio.h>
	48
	49	/ {
	50	model = "Banana Pi BPI-M2-Ultra";
	51	compatible = "sinovoip,bpi-m2-ultra", "allwinner,sun8i-r40";
	52
	53	aliases {
c36fd5a4	54	ethernet0 = &gmac;
da7ac948 CYT	55	serial0 = &uart0;
	56	};
	57
	58	chosen {
	59	stdout-path = "serial0:115200n8";
	60	};
	61
db49c682 JS	62	connector {
	63	compatible = "hdmi-connector";
	64	type = "a";
	65
	66	port {
	67	hdmi_con_in: endpoint {
	68	remote-endpoint = <&hdmi_out_con>;
	69	};
	70	};
	71	};
	72
da7ac948 CYT	73	leds {
	74	compatible = "gpio-leds";
	75
	76	pwr-led {
	77	label = "bananapi:red:pwr";
	78	gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
	79	default-state = "on";
	80	};
	81
	82	user-led-green {
	83	label = "bananapi:green:user";
	84	gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
	85	};
	86
	87	user-led-blue {
	88	label = "bananapi:blue:user";
	89	gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>;
	90	};
	91	};
	92
0ca12c1e IZ	93	reg_vcc5v0: vcc5v0 {
	94	compatible = "regulator-fixed";
	95	regulator-name = "vcc5v0";
	96	regulator-min-microvolt = <5000000>;
	97	regulator-max-microvolt = <5000000>;
	98	gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
	99	enable-active-high;
	100	};
	101
da7ac948 CYT	102	wifi_pwrseq: wifi_pwrseq {
	103	compatible = "mmc-pwrseq-simple";
	104	reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
1e5f1db4 CYT	105	clocks = <&ccu CLK_OUTA>;
1e5f1db4 CYT	106	clock-names = "ext_clock";
da7ac948 CYT	107	};
	108	};
	109
666907a3 CL	110	&ahci {
	111	ahci-supply = <&reg_dldo4>;
	112	phy-supply = <&reg_eldo3>;
	113	status = "okay";
	114	};
	115
db49c682 JS	116	&de {
	117	status = "okay";
	118	};
	119
1357bdb2 IZ	120	&ehci1 {
	121	status = "okay";
	122	};
	123
	124	&ehci2 {
	125	status = "okay";
	126	};
	127
c36fd5a4 CYT	128	&gmac {
	129	pinctrl-names = "default";
	130	pinctrl-0 = <&gmac_rgmii_pins>;
	131	phy-handle = <&phy1>;
	132	phy-mode = "rgmii";
	133	phy-supply = <&reg_dc1sw>;
	134	status = "okay";
	135	};
	136
	137	&gmac_mdio {
	138	phy1: ethernet-phy@1 {
	139	compatible = "ethernet-phy-ieee802.3-c22";
	140	reg = <1>;
	141	};
	142	};
	143
db49c682 JS	144	&hdmi {
	145	status = "okay";
	146	};
	147
	148	&hdmi_out {
	149	hdmi_out_con: endpoint {
	150	remote-endpoint = <&hdmi_con_in>;
	151	};
	152	};
	153
da7ac948 CYT	154	&i2c0 {
	155	status = "okay";
	156
	157	axp22x: pmic@34 {
	158	compatible = "x-powers,axp221";
	159	reg = <0x34>;
	160	interrupt-parent = <&nmi_intc>;
	161	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
	162	};
	163	};
	164
	165	#include "axp22x.dtsi"
	166
02b301f5 CYT	167	&mmc0 {
	168	vmmc-supply = <&reg_dcdc1>;
	169	bus-width = <4>;
c41ca64d	170	cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */
02b301f5 CYT	171	status = "okay";
	172	};
	173
	174	&mmc1 {
	175	pinctrl-names = "default";
	176	pinctrl-0 = <&mmc1_pg_pins>;
	177	vmmc-supply = <&reg_dldo2>;
	178	vqmmc-supply = <&reg_dldo1>;
	179	mmc-pwrseq = <&wifi_pwrseq>;
	180	bus-width = <4>;
	181	non-removable;
	182	status = "okay";
	183	};
	184
	185	&mmc2 {
	186	vmmc-supply = <&reg_dcdc1>;
	187	vqmmc-supply = <&reg_dcdc1>;
	188	bus-width = <8>;
	189	non-removable;
	190	status = "okay";
	191	};
	192
	193	&ohci1 {
	194	status = "okay";
	195	};
	196
	197	&ohci2 {
	198	status = "okay";
	199	};
	200
1e5f1db4 CYT	201	&pio {
	202	pinctrl-names = "default";
	203	pinctrl-0 = <&clk_out_a_pin>;
	204	};
	205
c36fd5a4 CYT	206	&reg_aldo2 {
	207	regulator-always-on;
	208	regulator-min-microvolt = <2500000>;
	209	regulator-max-microvolt = <2500000>;
	210	regulator-name = "vcc-pa";
	211	};
	212
da7ac948 CYT	213	&reg_aldo3 {
	214	regulator-always-on;
	215	regulator-min-microvolt = <2700000>;
	216	regulator-max-microvolt = <3300000>;
	217	regulator-name = "avcc";
c36fd5a4 CYT	218	};
	219
	220	&reg_dc1sw {
	221	regulator-min-microvolt = <3000000>;
	222	regulator-max-microvolt = <3000000>;
	223	regulator-name = "vcc-gmac-phy";
da7ac948 CYT	224	};
	225
	226	&reg_dcdc1 {
	227	regulator-always-on;
	228	regulator-min-microvolt = <3000000>;
	229	regulator-max-microvolt = <3000000>;
	230	regulator-name = "vcc-3v0";
	231	};
	232
	233	&reg_dcdc2 {
	234	regulator-always-on;
	235	regulator-min-microvolt = <1000000>;
	236	regulator-max-microvolt = <1300000>;
	237	regulator-name = "vdd-cpu";
	238	};
	239
	240	&reg_dcdc3 {
	241	regulator-always-on;
	242	regulator-min-microvolt = <1000000>;
	243	regulator-max-microvolt = <1300000>;
	244	regulator-name = "vdd-sys";
	245	};
	246
	247	&reg_dcdc5 {
	248	regulator-always-on;
	249	regulator-min-microvolt = <1500000>;
	250	regulator-max-microvolt = <1500000>;
	251	regulator-name = "vcc-dram";
	252	};
	253
	254	&reg_dldo1 {
	255	regulator-min-microvolt = <1800000>;
	256	regulator-max-microvolt = <3300000>;
	257	regulator-name = "vcc-wifi-io";
	258	};
	259
e5c6e693 CYT	260	/*
	261	* Our WiFi chip needs both DLDO2 and DLDO3 to be powered at the same
	262	* time, with the two being in sync, to be able to meet maximum power
	263	* consumption during transmits. Since this is not really supported
	264	* right now, just use the two as always on, and we will fix it later.
	265	*/
	266
da7ac948	267	&reg_dldo2 {
e5c6e693	268	regulator-always-on;
da7ac948 CYT	269	regulator-min-microvolt = <3300000>;
	270	regulator-max-microvolt = <3300000>;
	271	regulator-name = "vcc-wifi";
	272	};
	273
e5c6e693 CYT	274	&reg_dldo3 {
	275	regulator-always-on;
	276	regulator-min-microvolt = <3300000>;
	277	regulator-max-microvolt = <3300000>;
	278	regulator-name = "vcc-wifi-2";
	279	};
	280
666907a3 CL	281	&reg_dldo4 {
	282	regulator-min-microvolt = <2500000>;
	283	regulator-max-microvolt = <2500000>;
	284	regulator-name = "vdd2v5-sata";
	285	};
	286
	287	&reg_eldo3 {
	288	regulator-min-microvolt = <1200000>;
	289	regulator-max-microvolt = <1200000>;
	290	regulator-name = "vdd1v2-sata";
	291	};
	292
6a7556f6 JS	293	&tcon_tv0 {
	294	status = "okay";
	295	};
	296
da7ac948 CYT	297	&uart0 {
	298	pinctrl-names = "default";
	299	pinctrl-0 = <&uart0_pb_pins>;
	300	status = "okay";
	301	};
1357bdb2	302
1e5f1db4 CYT	303	&uart3 {
	304	pinctrl-names = "default";
	305	pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>;
	306	uart-has-rtscts;
	307	status = "okay";
	308
	309	bluetooth {
	310	compatible = "brcm,bcm43438-bt";
	311	clocks = <&ccu CLK_OUTA>;
	312	clock-names = "lpo";
	313	vbat-supply = <&reg_dldo2>;
	314	vddio-supply = <&reg_dldo1>;
	315	device-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
	316	/* TODO host wake line connected to PMIC GPIO pins */
	317	shutdown-gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
	318	max-speed = <1500000>;
	319	};
	320	};
	321
1357bdb2 IZ	322	&usbphy {
	323	usb1_vbus-supply = <&reg_vcc5v0>;
	324	usb2_vbus-supply = <&reg_vcc5v0>;
	325	status = "okay";
	326	};