Commit | Line | Data |
---|---|---|
77c6511a MR |
1 | /* |
2 | * Copyright (c) 2017 Free Electrons <maxime.ripard@free-electrons.com> | |
3 | * | |
4 | * This file is dual-licensed: you can use it either under the terms | |
5 | * of the GPL or the X11 license, at your option. Note that this dual | |
6 | * licensing only applies to this file, and not this project as a | |
7 | * whole. | |
8 | * | |
9 | * a) This file is free software; you can redistribute it and/or | |
10 | * modify it under the terms of the GNU General Public License as | |
11 | * published by the Free Software Foundation; either version 2 of the | |
12 | * License, or (at your option) any later version. | |
13 | * | |
14 | * This file is distributed in the hope that it will be useful, | |
15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
17 | * GNU General Public License for more details. | |
18 | * | |
19 | * Or, alternatively, | |
20 | * | |
21 | * b) Permission is hereby granted, free of charge, to any person | |
22 | * obtaining a copy of this software and associated documentation | |
23 | * files (the "Software"), to deal in the Software without | |
24 | * restriction, including without limitation the rights to use, | |
25 | * copy, modify, merge, publish, distribute, sublicense, and/or | |
26 | * sell copies of the Software, and to permit persons to whom the | |
27 | * Software is furnished to do so, subject to the following | |
28 | * conditions: | |
29 | * | |
30 | * The above copyright notice and this permission notice shall be | |
31 | * included in all copies or substantial portions of the Software. | |
32 | * | |
33 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, | |
34 | * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES | |
35 | * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND | |
36 | * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT | |
37 | * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, | |
38 | * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING | |
39 | * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR | |
40 | * OTHER DEALINGS IN THE SOFTWARE. | |
41 | */ | |
42 | ||
43 | /dts-v1/; | |
44 | #include "sun8i-a33.dtsi" | |
45 | ||
46 | #include <dt-bindings/gpio/gpio.h> | |
47 | ||
48 | / { | |
49 | model = "BananaPi M2 Magic"; | |
50 | compatible = "sinovoip,bananapi-m2m", "allwinner,sun8i-a33"; | |
51 | ||
52 | aliases { | |
53 | i2c0 = &i2c0; | |
54 | i2c1 = &i2c1; | |
55 | i2c2 = &i2c2; | |
56 | serial0 = &uart0; | |
57 | serial1 = &uart1; | |
58 | }; | |
59 | ||
60 | chosen { | |
61 | stdout-path = "serial0:115200n8"; | |
62 | }; | |
63 | ||
64 | leds { | |
65 | compatible = "gpio-leds"; | |
66 | ||
67 | blue { | |
68 | label = "bpi-m2m:blue:usr"; | |
69 | gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; | |
70 | }; | |
71 | ||
72 | green { | |
73 | label = "bpi-m2m:green:usr"; | |
74 | gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; | |
75 | }; | |
76 | ||
77 | red { | |
78 | label = "bpi-m2m:red:power"; | |
79 | gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; | |
80 | default-state = "on"; | |
81 | }; | |
82 | }; | |
83 | ||
84 | reg_vcc5v0: vcc5v0 { | |
85 | compatible = "regulator-fixed"; | |
86 | regulator-name = "vcc5v0"; | |
87 | regulator-min-microvolt = <5000000>; | |
88 | regulator-max-microvolt = <5000000>; | |
89 | }; | |
90 | ||
91 | wifi_pwrseq: wifi_pwrseq { | |
92 | compatible = "mmc-pwrseq-simple"; | |
93 | reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */ | |
94 | }; | |
95 | }; | |
96 | ||
97 | &codec { | |
98 | status = "okay"; | |
99 | }; | |
100 | ||
101 | &cpu0 { | |
102 | cpu-supply = <®_dcdc3>; | |
103 | }; | |
104 | ||
105 | &cpu0_opp_table { | |
106 | opp@1104000000 { | |
107 | opp-hz = /bits/ 64 <1104000000>; | |
108 | opp-microvolt = <1320000>; | |
109 | clock-latency-ns = <244144>; /* 8 32k periods */ | |
110 | }; | |
111 | ||
112 | opp@1200000000 { | |
113 | opp-hz = /bits/ 64 <1200000000>; | |
114 | opp-microvolt = <1320000>; | |
115 | clock-latency-ns = <244144>; /* 8 32k periods */ | |
116 | }; | |
117 | }; | |
118 | ||
119 | &dai { | |
120 | status = "okay"; | |
121 | }; | |
122 | ||
123 | &ehci0 { | |
124 | status = "okay"; | |
125 | }; | |
126 | ||
127 | /* This is the i2c bus exposed on the DSI connector for the touch panel */ | |
128 | &i2c0 { | |
129 | pinctrl-names = "default"; | |
130 | pinctrl-0 = <&i2c0_pins_a>; | |
131 | status = "disabled"; | |
132 | }; | |
133 | ||
134 | /* This is the i2c bus exposed on the GPIO header */ | |
135 | &i2c1 { | |
136 | pinctrl-names = "default"; | |
137 | pinctrl-0 = <&i2c1_pins_a>; | |
138 | status = "disabled"; | |
139 | }; | |
140 | ||
141 | /* This is the i2c bus exposed on the CSI connector to control the sensor */ | |
142 | &i2c2 { | |
143 | pinctrl-names = "default"; | |
144 | pinctrl-0 = <&i2c2_pins_a>; | |
145 | status = "disabled"; | |
146 | }; | |
147 | ||
148 | &mmc0 { | |
149 | pinctrl-names = "default"; | |
150 | pinctrl-0 = <&mmc0_pins_a>; | |
151 | vmmc-supply = <®_dcdc1>; | |
152 | bus-width = <4>; | |
153 | cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ | |
154 | cd-inverted; | |
155 | status = "okay"; | |
156 | }; | |
157 | ||
158 | &mmc1 { | |
159 | pinctrl-names = "default"; | |
160 | pinctrl-0 = <&mmc1_pins_a>; | |
161 | vmmc-supply = <®_aldo1>; | |
162 | mmc-pwrseq = <&wifi_pwrseq>; | |
163 | bus-width = <4>; | |
164 | non-removable; | |
165 | status = "okay"; | |
166 | }; | |
167 | ||
168 | &mmc2 { | |
169 | pinctrl-names = "default"; | |
170 | pinctrl-0 = <&mmc2_8bit_pins>; | |
171 | vmmc-supply = <®_dcdc1>; | |
172 | bus-width = <8>; | |
173 | non-removable; | |
174 | cap-mmc-hw-reset; | |
175 | status = "okay"; | |
176 | }; | |
177 | ||
178 | &ohci0 { | |
179 | status = "okay"; | |
180 | }; | |
181 | ||
182 | &r_rsb { | |
183 | status = "okay"; | |
184 | ||
185 | axp22x: pmic@3a3 { | |
186 | compatible = "x-powers,axp223"; | |
187 | reg = <0x3a3>; | |
188 | interrupt-parent = <&nmi_intc>; | |
189 | interrupts = <0 IRQ_TYPE_LEVEL_LOW>; | |
190 | eldoin-supply = <®_dcdc1>; | |
191 | x-powers,drive-vbus-en; | |
192 | }; | |
193 | }; | |
194 | ||
195 | #include "axp223.dtsi" | |
196 | ||
197 | &ac_power_supply { | |
198 | status = "okay"; | |
199 | }; | |
200 | ||
201 | ®_aldo1 { | |
202 | regulator-always-on; | |
203 | regulator-min-microvolt = <3000000>; | |
204 | regulator-max-microvolt = <3000000>; | |
205 | regulator-name = "vcc-io"; | |
206 | }; | |
207 | ||
208 | ®_aldo2 { | |
209 | regulator-always-on; | |
210 | regulator-min-microvolt = <2500000>; | |
211 | regulator-max-microvolt = <2500000>; | |
212 | regulator-name = "vdd-dll"; | |
213 | }; | |
214 | ||
215 | ®_aldo3 { | |
216 | regulator-always-on; | |
217 | regulator-min-microvolt = <3000000>; | |
218 | regulator-max-microvolt = <3000000>; | |
219 | regulator-name = "avcc"; | |
220 | }; | |
221 | ||
222 | ®_dc1sw { | |
223 | regulator-name = "vcc-lcd"; | |
224 | }; | |
225 | ||
226 | ®_dc5ldo { | |
227 | regulator-always-on; | |
228 | regulator-min-microvolt = <900000>; | |
229 | regulator-max-microvolt = <1400000>; | |
230 | regulator-name = "vdd-cpus"; | |
231 | }; | |
232 | ||
233 | ®_dcdc1 { | |
234 | regulator-always-on; | |
235 | regulator-min-microvolt = <3000000>; | |
236 | regulator-max-microvolt = <3000000>; | |
237 | regulator-name = "vcc-3v0"; | |
238 | }; | |
239 | ||
240 | ®_dcdc2 { | |
241 | regulator-always-on; | |
242 | regulator-min-microvolt = <900000>; | |
243 | regulator-max-microvolt = <1400000>; | |
244 | regulator-name = "vdd-sys"; | |
245 | }; | |
246 | ||
247 | ®_dcdc3 { | |
248 | regulator-always-on; | |
249 | regulator-min-microvolt = <900000>; | |
250 | regulator-max-microvolt = <1400000>; | |
251 | regulator-name = "vdd-cpu"; | |
252 | }; | |
253 | ||
254 | ®_dcdc5 { | |
255 | regulator-always-on; | |
256 | regulator-min-microvolt = <1500000>; | |
257 | regulator-max-microvolt = <1500000>; | |
258 | regulator-name = "vcc-dram"; | |
259 | }; | |
260 | ||
261 | /* | |
262 | * Our WiFi chip needs both DLDO1 and DLDO2 to be powered at the same | |
263 | * time, with the two being in sync. Since this is not really | |
264 | * supported right now, just use the two as always on, and we will fix | |
265 | * it later. | |
266 | */ | |
267 | ®_dldo1 { | |
268 | regulator-always-on; | |
269 | regulator-min-microvolt = <3300000>; | |
270 | regulator-max-microvolt = <3300000>; | |
271 | regulator-name = "vcc-wifi0"; | |
272 | }; | |
273 | ||
274 | ®_dldo2 { | |
275 | regulator-always-on; | |
276 | regulator-min-microvolt = <3300000>; | |
277 | regulator-max-microvolt = <3300000>; | |
278 | regulator-name = "vcc-wifi1"; | |
279 | }; | |
280 | ||
281 | ®_drivevbus { | |
282 | regulator-name = "usb0-vbus"; | |
283 | status = "okay"; | |
284 | }; | |
285 | ||
286 | ®_rtc_ldo { | |
287 | regulator-name = "vcc-rtc"; | |
288 | }; | |
289 | ||
290 | &sound { | |
291 | status = "okay"; | |
292 | }; | |
293 | ||
294 | &uart0 { | |
295 | pinctrl-names = "default"; | |
296 | pinctrl-0 = <&uart0_pins_b>; | |
297 | status = "okay"; | |
298 | }; | |
299 | ||
300 | &uart1 { | |
301 | pinctrl-names = "default"; | |
302 | pinctrl-0 = <&uart1_pins_a>, <&uart1_pins_cts_rts_a>; | |
303 | status = "okay"; | |
304 | }; | |
305 | ||
306 | &usb_otg { | |
307 | dr_mode = "otg"; | |
308 | status = "okay"; | |
309 | }; | |
310 | ||
311 | &usb_power_supply { | |
312 | status = "okay"; | |
313 | }; | |
314 | ||
315 | &usbphy { | |
316 | usb0_id_det-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */ | |
317 | usb0_vbus_power-supply = <&usb_power_supply>; | |
318 | usb0_vbus-supply = <®_drivevbus>; | |
319 | usb1_vbus-supply = <®_vcc5v0>; | |
320 | status = "okay"; | |
321 | }; |