[linux-2.6-block.git] / arch / arm / boot / dts / sun4i-a10-inet9f-rev03.dts

/*
 * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This file is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of the
 *     License, or (at your option) any later version.
 *
 *     This file is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 * Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */

/dts-v1/;
#include "sun4i-a10.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>

/ {
	model = "iNet-9F Rev 03";
	compatible = "inet-tek,inet9f-rev03", "allwinner,sun4i-a10";

	aliases {
		serial0 = &uart0;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	gpio_keys {
		compatible = "gpio-keys-polled";
		pinctrl-names = "default";
		pinctrl-0 = <&key_pins_inet9f>;
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <20>;

		button@0 {
			label = "Left Joystick Left";
			linux,code = <ABS_X>;
			linux,input-type = <EV_ABS>;
			linux,input-value = <0xffffffff>; /* -1 */
			gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */
		};

		button@1 {
			label = "Left Joystick Right";
			linux,code = <ABS_X>;
			linux,input-type = <EV_ABS>;
			linux,input-value = <1>;
			gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */
		};

		button@2 {
			label = "Left Joystick Up";
			linux,code = <ABS_Y>;
			linux,input-type = <EV_ABS>;
			linux,input-value = <0xffffffff>; /* -1 */
			gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
		};

		button@3 {
			label = "Left Joystick Down";
			linux,code = <ABS_Y>;
			linux,input-type = <EV_ABS>;
			linux,input-value = <1>;
			gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
		};

		button@4 {
			label = "Right Joystick Left";
			linux,code = <ABS_Z>;
			linux,input-type = <EV_ABS>;
			linux,input-value = <0xffffffff>; /* -1 */
			gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */
		};

		button@5 {
			label = "Right Joystick Right";
			linux,code = <ABS_Z>;
			linux,input-type = <EV_ABS>;
			linux,input-value = <1>;
			gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */
		};

		button@6 {
			label = "Right Joystick Up";
			linux,code = <ABS_RZ>;
			linux,input-type = <EV_ABS>;
			linux,input-value = <0xffffffff>; /* -1 */
			gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */
		};

		button@7 {
			label = "Right Joystick Down";
			linux,code = <ABS_RZ>;
			linux,input-type = <EV_ABS>;
			linux,input-value = <1>;
			gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
		};

		button@8 {
			label = "DPad Left";
			linux,code = <ABS_HAT0X>;
			linux,input-type = <EV_ABS>;
			linux,input-value = <0xffffffff>; /* -1 */
			gpios = <&pio 7 23 GPIO_ACTIVE_LOW>; /* PH23 */
		};

		button@9 {
			label = "DPad Right";
			linux,code = <ABS_HAT0X>;
			linux,input-type = <EV_ABS>;
			linux,input-value = <1>;
			gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */
		};

		button@10 {
			label = "DPad Up";
			linux,code = <ABS_HAT0Y>;
			linux,input-type = <EV_ABS>;
			linux,input-value = <0xffffffff>; /* -1 */
			gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */
		};

		button@11 {
			label = "DPad Down";
			linux,code = <ABS_HAT0Y>;
			linux,input-type = <EV_ABS>;
			linux,input-value = <1>;
			gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */
		};

		button@12 {
			label = "Button X";
			linux,code = <BTN_X>;
			gpios = <&pio 0 16 GPIO_ACTIVE_LOW>; /* PA16 */
		};

		button@13 {
			label = "Button Y";
			linux,code = <BTN_Y>;
			gpios = <&pio 0 14 GPIO_ACTIVE_LOW>; /* PA14 */
		};

		button@14 {
			label = "Button A";
			linux,code = <BTN_A>;
			gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
		};

		button@15 {
			label = "Button B";
			linux,code = <BTN_B>;
			gpios = <&pio 0 15 GPIO_ACTIVE_LOW>; /* PA15 */
		};

		button@16 {
			label = "Select Button";
			linux,code = <BTN_SELECT>;
			gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */
		};

		button@17 {
			label = "Start Button";
			linux,code = <BTN_START>;
			gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */
		};

		button@18 {
			label = "Top Left Button";
			linux,code = <BTN_TL>;
			gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
		};

		button@19 {
			label = "Top Right Button";
			linux,code = <BTN_TR>;
			gpios = <&pio 0 13 GPIO_ACTIVE_LOW>; /* PA13 */
		};
	};
};

&cpu0 {
	cpu-supply = <&reg_dcdc2>;
};

&ehci1 {
	status = "okay";
};

&i2c0 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c0_pins_a>;
	status = "okay";

	axp209: pmic@34 {
		reg = <0x34>;
		interrupts = <0>;
	};
};

#include "axp209.dtsi"

&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c1_pins_a>;
	status = "okay";

	/* Accelerometer */
	bma250@18 {
		compatible = "bosch,bma250";
		reg = <0x18>;
		interrupt-parent = <&pio>;
		interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
	};
};

&i2c2 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c2_pins_a>;
	status = "okay";

	ft5406ee8: touchscreen@38 {
		compatible = "edt,edt-ft5406";
		reg = <0x38>;
		interrupt-parent = <&pio>;
		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
		touchscreen-size-x = <800>;
		touchscreen-size-y = <480>;
	};
};

&lradc {
	vref-supply = <&reg_ldo2>;
	status = "okay";

	button@200 {
		label = "Menu";
		linux,code = <KEY_MENU>;
		channel = <0>;
		voltage = <200000>;
	};

	button@600 {
		label = "Volume Up";
		linux,code = <KEY_VOLUMEUP>;
		channel = <0>;
		voltage = <600000>;
	};

	button@800 {
		label = "Volume Down";
		linux,code = <KEY_VOLUMEDOWN>;
		channel = <0>;
		voltage = <800000>;
	};

	button@1000 {
		label = "Home";
		linux,code = <KEY_HOMEPAGE>;
		channel = <0>;
		voltage = <1000000>;
	};

	button@1200 {
		label = "Esc";
		linux,code = <KEY_ESC>;
		channel = <0>;
		voltage = <1200000>;
	};
};

&mmc0 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc0_pins_a>;
	vmmc-supply = <&reg_vcc3v3>;
	bus-width = <4>;
	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
	cd-inverted;
	status = "okay";
};

&otg_sram {
	status = "okay";
};

&pio {
	key_pins_inet9f: key_pins@0 {
		pins = "PA0", "PA1", "PA3", "PA4",
		       "PA5", "PA6", "PA8", "PA9",
		       "PA11", "PA12", "PA13",
		       "PA14", "PA15", "PA16", "PA17",
		       "PH22", "PH23", "PH24", "PH25", "PH26";
		function = "gpio_in";
		bias-pull-up;
	};

	usb0_id_detect_pin: usb0_id_detect_pin@0 {
		pins = "PH4";
		function = "gpio_in";
		bias-pull-up;
	};

	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
		pins = "PH5";
		function = "gpio_in";
		bias-pull-down;
	};
};

&reg_dcdc2 {
	regulator-always-on;
	regulator-min-microvolt = <1000000>;
	regulator-max-microvolt = <1400000>;
	regulator-name = "vdd-cpu";
};

&reg_dcdc3 {
	regulator-always-on;
	regulator-min-microvolt = <1250000>;
	regulator-max-microvolt = <1250000>;
	regulator-name = "vdd-int-dll";
};

&reg_ldo1 {
	regulator-name = "vdd-rtc";
};

&reg_ldo2 {
	regulator-always-on;
	regulator-min-microvolt = <3000000>;
	regulator-max-microvolt = <3000000>;
	regulator-name = "avcc";
};

&reg_usb0_vbus {
	status = "okay";
};

&reg_usb2_vbus {
	status = "okay";
};

&uart0 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart0_pins_a>;
	status = "okay";
};

&usb_otg {
	dr_mode = "otg";
	status = "okay";
};

&usbphy {
	pinctrl-names = "default";
	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
	usb0_vbus-supply = <&reg_usb0_vbus>;
	usb2_vbus-supply = <&reg_usb2_vbus>;
	status = "okay";
};
Commit	Line	Data
2ecf488b HG	1	/*
	2	* Copyright 2015 Hans de Goede <hdegoede@redhat.com>
	3	*
	4	* This file is dual-licensed: you can use it either under the terms
	5	* of the GPL or the X11 license, at your option. Note that this dual
	6	* licensing only applies to this file, and not this project as a
	7	* whole.
	8	*
	9	* a) This file is free software; you can redistribute it and/or
	10	* modify it under the terms of the GNU General Public License as
	11	* published by the Free Software Foundation; either version 2 of the
	12	* License, or (at your option) any later version.
	13	*
	14	* This file is distributed in the hope that it will be useful,
	15	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	16	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	17	* GNU General Public License for more details.
	18	*
	19	* Or, alternatively,
	20	*
	21	* b) Permission is hereby granted, free of charge, to any person
	22	* obtaining a copy of this software and associated documentation
	23	* files (the "Software"), to deal in the Software without
	24	* restriction, including without limitation the rights to use,
	25	* copy, modify, merge, publish, distribute, sublicense, and/or
	26	* sell copies of the Software, and to permit persons to whom the
	27	* Software is furnished to do so, subject to the following
	28	* conditions:
	29	*
	30	* The above copyright notice and this permission notice shall be
	31	* included in all copies or substantial portions of the Software.
	32	*
	33	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	34	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	35	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	36	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	37	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
	38	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	39	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	40	* OTHER DEALINGS IN THE SOFTWARE.
	41	*/
	42
	43	/dts-v1/;
	44	#include "sun4i-a10.dtsi"
	45	#include "sunxi-common-regulators.dtsi"
	46	#include <dt-bindings/gpio/gpio.h>
	47	#include <dt-bindings/input/input.h>
	48	#include <dt-bindings/interrupt-controller/irq.h>
2ecf488b HG	49
	50	/ {
	51	model = "iNet-9F Rev 03";
	52	compatible = "inet-tek,inet9f-rev03", "allwinner,sun4i-a10";
	53
	54	aliases {
	55	serial0 = &uart0;
	56	};
	57
	58	chosen {
	59	stdout-path = "serial0:115200n8";
	60	};
e6c9b754 HG	61
	62	gpio_keys {
	63	compatible = "gpio-keys-polled";
	64	pinctrl-names = "default";
	65	pinctrl-0 = <&key_pins_inet9f>;
	66	#address-cells = <1>;
	67	#size-cells = <0>;
	68	poll-interval = <20>;
	69
	70	button@0 {
	71	label = "Left Joystick Left";
	72	linux,code = <ABS_X>;
	73	linux,input-type = <EV_ABS>;
	74	linux,input-value = <0xffffffff>; /* -1 */
	75	gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */
	76	};
	77
	78	button@1 {
	79	label = "Left Joystick Right";
	80	linux,code = <ABS_X>;
	81	linux,input-type = <EV_ABS>;
	82	linux,input-value = <1>;
	83	gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */
	84	};
	85
	86	button@2 {
	87	label = "Left Joystick Up";
	88	linux,code = <ABS_Y>;
	89	linux,input-type = <EV_ABS>;
	90	linux,input-value = <0xffffffff>; /* -1 */
	91	gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
	92	};
	93
	94	button@3 {
	95	label = "Left Joystick Down";
	96	linux,code = <ABS_Y>;
	97	linux,input-type = <EV_ABS>;
	98	linux,input-value = <1>;
	99	gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
	100	};
	101
	102	button@4 {
	103	label = "Right Joystick Left";
	104	linux,code = <ABS_Z>;
	105	linux,input-type = <EV_ABS>;
	106	linux,input-value = <0xffffffff>; /* -1 */
	107	gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */
	108	};
	109
	110	button@5 {
	111	label = "Right Joystick Right";
	112	linux,code = <ABS_Z>;
	113	linux,input-type = <EV_ABS>;
	114	linux,input-value = <1>;
	115	gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */
	116	};
	117
	118	button@6 {
	119	label = "Right Joystick Up";
	120	linux,code = <ABS_RZ>;
	121	linux,input-type = <EV_ABS>;
	122	linux,input-value = <0xffffffff>; /* -1 */
	123	gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */
	124	};
125
126	button@7 {
127	label = "Right Joystick Down";
128	linux,code = <ABS_RZ>;
129	linux,input-type = <EV_ABS>;
130	linux,input-value = <1>;
131	gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
132	};
133
134	button@8 {
135	label = "DPad Left";
136	linux,code = <ABS_HAT0X>;
137	linux,input-type = <EV_ABS>;
138	linux,input-value = <0xffffffff>; /* -1 */
139	gpios = <&pio 7 23 GPIO_ACTIVE_LOW>; /* PH23 */
140	};
141
142	button@9 {
143	label = "DPad Right";
144	linux,code = <ABS_HAT0X>;
145	linux,input-type = <EV_ABS>;
146	linux,input-value = <1>;
147	gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */
148	};
149
150	button@10 {
151	label = "DPad Up";
152	linux,code = <ABS_HAT0Y>;
153	linux,input-type = <EV_ABS>;
154	linux,input-value = <0xffffffff>; /* -1 */
155	gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */
156	};
157
158	button@11 {
159	label = "DPad Down";
160	linux,code = <ABS_HAT0Y>;
161	linux,input-type = <EV_ABS>;
162	linux,input-value = <1>;
163	gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */
164	};
165
166	button@12 {
167	label = "Button X";
168	linux,code = <BTN_X>;
169	gpios = <&pio 0 16 GPIO_ACTIVE_LOW>; /* PA16 */
170	};
171
172	button@13 {
173	label = "Button Y";
174	linux,code = <BTN_Y>;
175	gpios = <&pio 0 14 GPIO_ACTIVE_LOW>; /* PA14 */
176	};
177
178	button@14 {
179	label = "Button A";
180	linux,code = <BTN_A>;
181	gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
182	};
183
184	button@15 {
185	label = "Button B";
186	linux,code = <BTN_B>;
187	gpios = <&pio 0 15 GPIO_ACTIVE_LOW>; /* PA15 */
188	};
189
190	button@16 {
191	label = "Select Button";
192	linux,code = <BTN_SELECT>;
193	gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */
194	};
195
196	button@17 {
197	label = "Start Button";
198	linux,code = <BTN_START>;
199	gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */
200	};
201
202	button@18 {
203	label = "Top Left Button";
204	linux,code = <BTN_TL>;
205	gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
206	};
207
208	button@19 {
209	label = "Top Right Button";
210	linux,code = <BTN_TR>;
211	gpios = <&pio 0 13 GPIO_ACTIVE_LOW>; /* PA13 */
212	};
213	};
2ecf488b HG	214	};
	215
	216	&cpu0 {
	217	cpu-supply = <&reg_dcdc2>;
	218	};
	219
	220	&ehci1 {
	221	status = "okay";
	222	};
	223
	224	&i2c0 {
	225	pinctrl-names = "default";
	226	pinctrl-0 = <&i2c0_pins_a>;
	227	status = "okay";
	228
	229	axp209: pmic@34 {
	230	reg = <0x34>;
	231	interrupts = <0>;
	232	};
	233	};
	234
	235	#include "axp209.dtsi"
	236
	237	&i2c1 {
	238	pinctrl-names = "default";
	239	pinctrl-0 = <&i2c1_pins_a>;
	240	status = "okay";
	241
	242	/* Accelerometer */
	243	bma250@18 {
	244	compatible = "bosch,bma250";
	245	reg = <0x18>;
	246	interrupt-parent = <&pio>;
	247	interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
	248	};
	249	};
	250
	251	&i2c2 {
	252	pinctrl-names = "default";
	253	pinctrl-0 = <&i2c2_pins_a>;
	254	status = "okay";
925c8710 HG	255
	256	ft5406ee8: touchscreen@38 {
	257	compatible = "edt,edt-ft5406";
	258	reg = <0x38>;
	259	interrupt-parent = <&pio>;
	260	interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
	261	touchscreen-size-x = <800>;
	262	touchscreen-size-y = <480>;
	263	};
2ecf488b HG	264	};
	265
	266	&lradc {
	267	vref-supply = <&reg_ldo2>;
	268	status = "okay";
	269
	270	button@200 {
	271	label = "Menu";
	272	linux,code = <KEY_MENU>;
	273	channel = <0>;
	274	voltage = <200000>;
	275	};
	276
	277	button@600 {
	278	label = "Volume Up";
	279	linux,code = <KEY_VOLUMEUP>;
	280	channel = <0>;
	281	voltage = <600000>;
	282	};
	283
	284	button@800 {
	285	label = "Volume Down";
	286	linux,code = <KEY_VOLUMEDOWN>;
	287	channel = <0>;
	288	voltage = <800000>;
	289	};
	290
	291	button@1000 {
	292	label = "Home";
	293	linux,code = <KEY_HOMEPAGE>;
	294	channel = <0>;
	295	voltage = <1000000>;
	296	};
	297
	298	button@1200 {
	299	label = "Esc";
	300	linux,code = <KEY_ESC>;
	301	channel = <0>;
	302	voltage = <1200000>;
	303	};
	304	};
	305
	306	&mmc0 {
	307	pinctrl-names = "default";
cf439662	308	pinctrl-0 = <&mmc0_pins_a>;
2ecf488b HG	309	vmmc-supply = <&reg_vcc3v3>;
	310	bus-width = <4>;
	311	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
	312	cd-inverted;
	313	status = "okay";
	314	};
	315
	316	&otg_sram {
	317	status = "okay";
	318	};
	319
	320	&pio {
e6c9b754	321	key_pins_inet9f: key_pins@0 {
1edcd36f MR	322	pins = "PA0", "PA1", "PA3", "PA4",
	323	"PA5", "PA6", "PA8", "PA9",
	324	"PA11", "PA12", "PA13",
	325	"PA14", "PA15", "PA16", "PA17",
	326	"PH22", "PH23", "PH24", "PH25", "PH26";
	327	function = "gpio_in";
	328	bias-pull-up;
e6c9b754 HG	329	};
e6c9b754 HG	330
2ecf488b	331	usb0_id_detect_pin: usb0_id_detect_pin@0 {
1edcd36f MR	332	pins = "PH4";
	333	function = "gpio_in";
	334	bias-pull-up;
2ecf488b HG	335	};
	336
	337	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
1edcd36f MR	338	pins = "PH5";
	339	function = "gpio_in";
	340	bias-pull-down;
2ecf488b HG	341	};
	342	};
	343
	344	&reg_dcdc2 {
	345	regulator-always-on;
	346	regulator-min-microvolt = <1000000>;
	347	regulator-max-microvolt = <1400000>;
	348	regulator-name = "vdd-cpu";
	349	};
	350
	351	&reg_dcdc3 {
	352	regulator-always-on;
	353	regulator-min-microvolt = <1250000>;
	354	regulator-max-microvolt = <1250000>;
	355	regulator-name = "vdd-int-dll";
	356	};
	357
	358	&reg_ldo1 {
	359	regulator-name = "vdd-rtc";
	360	};
	361
	362	&reg_ldo2 {
	363	regulator-always-on;
	364	regulator-min-microvolt = <3000000>;
	365	regulator-max-microvolt = <3000000>;
	366	regulator-name = "avcc";
	367	};
	368
	369	&reg_usb0_vbus {
	370	status = "okay";
	371	};
	372
	373	&reg_usb2_vbus {
	374	status = "okay";
	375	};
	376
	377	&uart0 {
	378	pinctrl-names = "default";
	379	pinctrl-0 = <&uart0_pins_a>;
	380	status = "okay";
	381	};
	382
	383	&usb_otg {
	384	dr_mode = "otg";
	385	status = "okay";
	386	};
	387
	388	&usbphy {
	389	pinctrl-names = "default";
	390	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
	391	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
	392	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
	393	usb0_vbus-supply = <&reg_usb0_vbus>;
	394	usb2_vbus-supply = <&reg_usb2_vbus>;
	395	status = "okay";
	396	};