Commit | Line | Data |
---|---|---|
2d334297 AB |
1 | /* |
2 | * Copyright 2011 ST-Ericsson AB | |
3 | * | |
4 | * The code contained herein is licensed under the GNU General Public | |
5 | * License. You may obtain a copy of the GNU General Public License | |
6 | * Version 2 or later at the following locations: | |
7 | * | |
8 | * http://www.opensource.org/licenses/gpl-license.html | |
9 | * http://www.gnu.org/copyleft/gpl.html | |
10 | */ | |
11 | ||
12 | /dts-v1/; | |
2ce05a14 | 13 | #include "ste-dbx5x0.dtsi" |
83200629 | 14 | #include "ste-href-ab8500.dtsi" |
3bfdebba | 15 | #include "ste-href-family-pinctrl.dtsi" |
2d334297 AB |
16 | |
17 | / { | |
18 | model = "Calao Systems Snowball platform with device tree"; | |
79b40753 | 19 | compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500"; |
2d334297 | 20 | |
109978de LW |
21 | /* This stablilizes the serial port enumeration */ |
22 | aliases { | |
23 | serial0 = &ux500_serial0; | |
24 | serial1 = &ux500_serial1; | |
25 | serial2 = &ux500_serial2; | |
26 | }; | |
27 | ||
2d334297 AB |
28 | memory { |
29 | reg = <0x00000000 0x20000000>; | |
30 | }; | |
31 | ||
bc367481 LJ |
32 | en_3v3_reg: en_3v3 { |
33 | compatible = "regulator-fixed"; | |
b099576d LJ |
34 | regulator-name = "en-3v3-fixed-supply"; |
35 | regulator-min-microvolt = <3300000>; | |
36 | regulator-max-microvolt = <3300000>; | |
37 | /* AB8500 GPIOs start from 1 - offset 25 is GPIO26. */ | |
38 | gpio = <&ab8500_gpio 25 0x4>; | |
39 | startup-delay-us = <5000>; | |
40 | enable-active-high; | |
bc367481 LJ |
41 | }; |
42 | ||
7e0ce270 LJ |
43 | gpio_keys { |
44 | compatible = "gpio-keys"; | |
45 | #address-cells = <1>; | |
46 | #size-cells = <0>; | |
47 | ||
48 | button@1 { | |
49 | debounce_interval = <50>; | |
4db7062c | 50 | wakeup-source; |
7e0ce270 LJ |
51 | linux,code = <2>; |
52 | label = "userpb"; | |
93b5698a | 53 | gpios = <&gpio1 0 0x4>; |
7e0ce270 LJ |
54 | }; |
55 | button@2 { | |
56 | debounce_interval = <50>; | |
4db7062c | 57 | wakeup-source; |
7e0ce270 | 58 | linux,code = <3>; |
3f3ed400 | 59 | label = "extkb1"; |
93b5698a | 60 | gpios = <&gpio4 23 0x4>; |
7e0ce270 LJ |
61 | }; |
62 | button@3 { | |
63 | debounce_interval = <50>; | |
4db7062c | 64 | wakeup-source; |
7e0ce270 | 65 | linux,code = <4>; |
3f3ed400 | 66 | label = "extkb2"; |
93b5698a | 67 | gpios = <&gpio4 24 0x4>; |
7e0ce270 LJ |
68 | }; |
69 | button@4 { | |
70 | debounce_interval = <50>; | |
4db7062c | 71 | wakeup-source; |
7e0ce270 | 72 | linux,code = <5>; |
3f3ed400 | 73 | label = "extkb3"; |
93b5698a | 74 | gpios = <&gpio5 1 0x4>; |
7e0ce270 LJ |
75 | }; |
76 | button@5 { | |
77 | debounce_interval = <50>; | |
4db7062c | 78 | wakeup-source; |
7e0ce270 | 79 | linux,code = <6>; |
3f3ed400 | 80 | label = "extkb4"; |
93b5698a | 81 | gpios = <&gpio5 2 0x4>; |
7e0ce270 LJ |
82 | }; |
83 | }; | |
84 | ||
85 | leds { | |
86 | compatible = "gpio-leds"; | |
2f4b84f8 LW |
87 | pinctrl-names = "default"; |
88 | pinctrl-0 = <&gpioled_snowball_mode>; | |
7e0ce270 LJ |
89 | used-led { |
90 | label = "user_led"; | |
93b5698a | 91 | gpios = <&gpio4 14 0x4>; |
7fd975fa | 92 | default-state = "on"; |
fd53d042 | 93 | linux,default-trigger = "heartbeat"; |
7e0ce270 LJ |
94 | }; |
95 | }; | |
96 | ||
b1ba1439 | 97 | soc { |
a12f703c LW |
98 | usb_per5@a03e0000 { |
99 | pinctrl-names = "default", "sleep"; | |
100 | pinctrl-0 = <&musb_default_mode>; | |
101 | pinctrl-1 = <&musb_sleep_mode>; | |
102 | }; | |
e6488065 LJ |
103 | |
104 | sound { | |
105 | compatible = "stericsson,snd-soc-mop500"; | |
106 | ||
107 | stericsson,cpu-dai = <&msp1 &msp3>; | |
108 | stericsson,audio-codec = <&codec>; | |
109 | }; | |
110 | ||
70b41abc LW |
111 | msp0: msp@80123000 { |
112 | pinctrl-names = "default"; | |
113 | pinctrl-0 = <&msp0_default_mode>; | |
114 | status = "okay"; | |
115 | }; | |
116 | ||
fe164529 | 117 | msp1: msp@80124000 { |
70b41abc LW |
118 | pinctrl-names = "default"; |
119 | pinctrl-0 = <&msp1_default_mode>; | |
120 | status = "okay"; | |
121 | }; | |
122 | ||
123 | msp2: msp@80117000 { | |
124 | pinctrl-names = "default"; | |
125 | pinctrl-0 = <&msp2_default_mode>; | |
fe164529 LJ |
126 | }; |
127 | ||
128 | msp3: msp@80125000 { | |
129 | status = "okay"; | |
130 | }; | |
131 | ||
7e0ce270 | 132 | external-bus@50000000 { |
bf76e062 LJ |
133 | status = "okay"; |
134 | ||
135 | ethernet@0 { | |
136 | compatible = "smsc,lan9115"; | |
137 | reg = <0 0x10000>; | |
90c40257 | 138 | interrupts = <12 IRQ_TYPE_EDGE_RISING>; |
7e0ce270 | 139 | interrupt-parent = <&gpio4>; |
bc367481 LJ |
140 | vdd33a-supply = <&en_3v3_reg>; |
141 | vddvario-supply = <&db8500_vape_reg>; | |
a48bf4b9 LW |
142 | pinctrl-names = "default"; |
143 | pinctrl-0 = <ð_snowball_mode>; | |
bc367481 | 144 | |
bf76e062 LJ |
145 | reg-shift = <1>; |
146 | reg-io-width = <2>; | |
147 | smsc,force-internal-phy; | |
148 | smsc,irq-active-high; | |
149 | smsc,irq-push-pull; | |
7fb2afc7 LJ |
150 | |
151 | clocks = <&prcc_pclk 3 0>; | |
7e0ce270 LJ |
152 | }; |
153 | }; | |
154 | ||
383307c2 | 155 | vmmci: regulator-gpio { |
53d26698 UH |
156 | compatible = "regulator-gpio"; |
157 | ||
a1ab5e4c UH |
158 | gpios = <&gpio7 4 0x4>; |
159 | enable-gpio = <&gpio6 25 0x4>; | |
53d26698 UH |
160 | |
161 | regulator-min-microvolt = <1800000>; | |
162 | regulator-max-microvolt = <2900000>; | |
163 | regulator-name = "mmci-reg"; | |
164 | regulator-type = "voltage"; | |
165 | ||
166 | startup-delay-us = <100>; | |
167 | enable-active-high; | |
168 | ||
169 | states = <1800000 0x1 | |
170 | 2900000 0x0>; | |
383307c2 LJ |
171 | }; |
172 | ||
5e1ac7db | 173 | // External Micro SD slot |
81bf8c2e | 174 | sdi0_per1@80126000 { |
5e1ac7db | 175 | arm,primecell-periphid = <0x10480180>; |
90ccde4c | 176 | max-frequency = <100000000>; |
92a0f489 | 177 | bus-width = <4>; |
30cdd668 | 178 | cap-mmc-highspeed; |
4a85c7fa | 179 | vmmc-supply = <&ab8500_ldo_aux3_reg>; |
383307c2 | 180 | vqmmc-supply = <&vmmci>; |
1e662353 LW |
181 | pinctrl-names = "default", "sleep"; |
182 | pinctrl-0 = <&sdi0_default_mode>; | |
183 | pinctrl-1 = <&sdi0_sleep_mode>; | |
5e1ac7db | 184 | |
93b5698a | 185 | cd-gpios = <&gpio6 26 0x4>; // 218 |
5e1ac7db LJ |
186 | cd-inverted; |
187 | ||
188 | status = "okay"; | |
7e0ce270 LJ |
189 | }; |
190 | ||
1e662353 LW |
191 | // WLAN SDIO channel |
192 | sdi1_per2@80118000 { | |
193 | arm,primecell-periphid = <0x10480180>; | |
194 | max-frequency = <100000000>; | |
195 | bus-width = <4>; | |
196 | pinctrl-names = "default", "sleep"; | |
197 | pinctrl-0 = <&sdi1_default_mode>; | |
198 | pinctrl-1 = <&sdi1_sleep_mode>; | |
199 | ||
200 | status = "okay"; | |
201 | }; | |
202 | ||
203 | // Unused PoP eMMC - register and put it to sleep by default */ | |
204 | sdi2_per3@80005000 { | |
205 | arm,primecell-periphid = <0x10480180>; | |
206 | pinctrl-names = "default"; | |
207 | pinctrl-0 = <&sdi2_sleep_mode>; | |
208 | ||
209 | status = "okay"; | |
210 | }; | |
211 | ||
5e1ac7db | 212 | // On-board eMMC |
81bf8c2e | 213 | sdi4_per2@80114000 { |
5e1ac7db | 214 | arm,primecell-periphid = <0x10480180>; |
90ccde4c | 215 | max-frequency = <100000000>; |
5e1ac7db | 216 | bus-width = <8>; |
30cdd668 | 217 | cap-mmc-highspeed; |
4a85c7fa | 218 | vmmc-supply = <&ab8500_ldo_aux2_reg>; |
1e662353 LW |
219 | pinctrl-names = "default", "sleep"; |
220 | pinctrl-0 = <&sdi4_default_mode>; | |
221 | pinctrl-1 = <&sdi4_sleep_mode>; | |
5e1ac7db LJ |
222 | |
223 | status = "okay"; | |
7e0ce270 LJ |
224 | }; |
225 | ||
4905af0e | 226 | uart@80120000 { |
3bfdebba LW |
227 | pinctrl-names = "default", "sleep"; |
228 | pinctrl-0 = <&uart0_default_mode>; | |
229 | pinctrl-1 = <&uart0_sleep_mode>; | |
4905af0e LJ |
230 | status = "okay"; |
231 | }; | |
232 | ||
1d8aca9d | 233 | /* This UART is unused and thus left disabled */ |
4905af0e | 234 | uart@80121000 { |
3bfdebba LW |
235 | pinctrl-names = "default", "sleep"; |
236 | pinctrl-0 = <&uart1_default_mode>; | |
237 | pinctrl-1 = <&uart1_sleep_mode>; | |
4905af0e LJ |
238 | }; |
239 | ||
240 | uart@80007000 { | |
3bfdebba LW |
241 | pinctrl-names = "default", "sleep"; |
242 | pinctrl-0 = <&uart2_default_mode>; | |
243 | pinctrl-1 = <&uart2_sleep_mode>; | |
4905af0e LJ |
244 | status = "okay"; |
245 | }; | |
246 | ||
96fee13f LW |
247 | i2c@80004000 { |
248 | pinctrl-names = "default","sleep"; | |
249 | pinctrl-0 = <&i2c0_default_mode>; | |
250 | pinctrl-1 = <&i2c0_sleep_mode>; | |
251 | }; | |
252 | ||
253 | i2c@80122000 { | |
254 | pinctrl-names = "default","sleep"; | |
255 | pinctrl-0 = <&i2c1_default_mode>; | |
256 | pinctrl-1 = <&i2c1_sleep_mode>; | |
257 | }; | |
258 | ||
259 | i2c@80128000 { | |
260 | pinctrl-names = "default","sleep"; | |
261 | pinctrl-0 = <&i2c2_default_mode>; | |
262 | pinctrl-1 = <&i2c2_sleep_mode>; | |
d0e3bc81 LW |
263 | lsm303dlh@18 { |
264 | /* Accelerometer */ | |
265 | compatible = "st,lsm303dlh-accel"; | |
266 | st,drdy-int-pin = <1>; | |
267 | reg = <0x18>; | |
268 | vdd-supply = <&ab8500_ldo_aux1_reg>; | |
269 | vddio-supply = <&db8500_vsmps2_reg>; | |
270 | pinctrl-names = "default"; | |
271 | pinctrl-0 = <&accel_snowball_mode>; | |
22a93167 LW |
272 | interrupt-parent = <&gpio5>; |
273 | interrupts = <3 IRQ_TYPE_EDGE_RISING>, /* INT1 */ | |
274 | <4 IRQ_TYPE_EDGE_RISING>; /* INT2 */ | |
d0e3bc81 | 275 | }; |
93deea9a | 276 | lsm303dlh@1e { |
d0e3bc81 | 277 | /* Magnetometer */ |
93deea9a | 278 | compatible = "st,lsm303dlh-magn"; |
d0e3bc81 LW |
279 | reg = <0x1e>; |
280 | vdd-supply = <&ab8500_ldo_aux1_reg>; | |
281 | vddio-supply = <&db8500_vsmps2_reg>; | |
282 | pinctrl-names = "default"; | |
283 | pinctrl-0 = <&magneto_snowball_mode>; | |
22a93167 | 284 | gpios = <&gpio5 5 0x4>; /* DRDY line */ |
d0e3bc81 LW |
285 | }; |
286 | l3g4200d@68 { | |
287 | /* Gyroscope */ | |
288 | compatible = "st,l3g4200d-gyro"; | |
289 | st,drdy-int-pin = <2>; | |
290 | reg = <0x68>; | |
291 | vdd-supply = <&ab8500_ldo_aux1_reg>; | |
292 | vddio-supply = <&db8500_vsmps2_reg>; | |
22a93167 LW |
293 | pinctrl-names = "default"; |
294 | pinctrl-0 = <&gyro_snowball_mode>; | |
295 | gpios = <&gpio5 6 0x4>; /* DRDY line */ | |
296 | interrupt-parent = <&gpio5>; | |
297 | interrupts = <9 IRQ_TYPE_EDGE_RISING>; /* INT1 */ | |
d0e3bc81 LW |
298 | }; |
299 | lsp001wm@5c { | |
300 | /* Barometer/pressure sensor */ | |
301 | compatible = "st,lps001wp-press"; | |
302 | reg = <0x5c>; | |
303 | vdd-supply = <&ab8500_ldo_aux1_reg>; | |
304 | vddio-supply = <&db8500_vsmps2_reg>; | |
305 | }; | |
96fee13f LW |
306 | }; |
307 | ||
308 | i2c@80110000 { | |
309 | pinctrl-names = "default","sleep"; | |
310 | pinctrl-0 = <&i2c3_default_mode>; | |
311 | pinctrl-1 = <&i2c3_sleep_mode>; | |
312 | }; | |
313 | ||
fd8f9eac LW |
314 | ssp@80002000 { |
315 | pinctrl-names = "default"; | |
316 | pinctrl-0 = <&ssp0_snowball_mode>; | |
317 | }; | |
318 | ||
dc1956b5 | 319 | cpufreq-cooling { |
320 | status = "okay"; | |
321 | }; | |
db5b0ae0 | 322 | |
809efa56 | 323 | prcmu@80157000 { |
6cb7ea99 LJ |
324 | cpufreq { |
325 | status = "okay"; | |
326 | }; | |
327 | ||
6c1d25b0 LJ |
328 | thermal@801573c0 { |
329 | num-trips = <4>; | |
330 | ||
331 | trip0-temp = <70000>; | |
332 | trip0-type = "active"; | |
333 | trip0-cdev-num = <1>; | |
334 | trip0-cdev-name0 = "thermal-cpufreq-0"; | |
335 | ||
336 | trip1-temp = <75000>; | |
337 | trip1-type = "active"; | |
338 | trip1-cdev-num = <1>; | |
339 | trip1-cdev-name0 = "thermal-cpufreq-0"; | |
340 | ||
341 | trip2-temp = <80000>; | |
342 | trip2-type = "active"; | |
343 | trip2-cdev-num = <1>; | |
344 | trip2-cdev-name0 = "thermal-cpufreq-0"; | |
345 | ||
346 | trip3-temp = <85000>; | |
347 | trip3-type = "critical"; | |
348 | trip3-cdev-num = <0>; | |
349 | ||
350 | status = "okay"; | |
351 | }; | |
352 | ||
d52701d3 | 353 | ab8500 { |
924e82da LJ |
354 | ab8500-gpio { |
355 | compatible = "stericsson,ab8500-gpio"; | |
356 | }; | |
357 | ||
b0c8fade LJ |
358 | ext_regulators: ab8500-ext-regulators { |
359 | ab8500_ext1_reg: ab8500_ext1 { | |
360 | regulator-name = "ab8500-ext-supply1"; | |
361 | }; | |
362 | ||
363 | ab8500_ext2_reg_reg: ab8500_ext2 { | |
364 | regulator-name = "ab8500-ext-supply2"; | |
365 | }; | |
366 | ||
367 | ab8500_ext3_reg_reg: ab8500_ext3 { | |
368 | regulator-name = "ab8500-ext-supply3"; | |
369 | }; | |
370 | }; | |
371 | ||
809efa56 LJ |
372 | ab8500-regulators { |
373 | ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { | |
374 | regulator-name = "V-DISPLAY"; | |
375 | }; | |
376 | ||
377 | ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { | |
378 | regulator-name = "V-eMMC1"; | |
379 | }; | |
380 | ||
381 | ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { | |
382 | regulator-name = "V-MMC-SD"; | |
383 | }; | |
384 | ||
99b38eef | 385 | ab8500_ldo_intcore_reg: ab8500_ldo_intcore { |
809efa56 LJ |
386 | regulator-name = "V-INTCORE"; |
387 | }; | |
388 | ||
389 | ab8500_ldo_tvout_reg: ab8500_ldo_tvout { | |
390 | regulator-name = "V-TVOUT"; | |
391 | }; | |
392 | ||
393 | ab8500_ldo_usb_reg: ab8500_ldo_usb { | |
394 | regulator-name = "dummy"; | |
395 | }; | |
396 | ||
397 | ab8500_ldo_audio_reg: ab8500_ldo_audio { | |
398 | regulator-name = "V-AUD"; | |
399 | }; | |
400 | ||
401 | ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { | |
402 | regulator-name = "V-AMIC1"; | |
403 | }; | |
404 | ||
5510ed9f | 405 | ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 { |
809efa56 LJ |
406 | regulator-name = "V-AMIC2"; |
407 | }; | |
408 | ||
409 | ab8500_ldo_dmic_reg: ab8500_ldo_dmic { | |
410 | regulator-name = "V-DMIC"; | |
411 | }; | |
412 | ||
413 | ab8500_ldo_ana_reg: ab8500_ldo_ana { | |
414 | regulator-name = "V-CSI/DSI"; | |
415 | }; | |
416 | }; | |
417 | }; | |
418 | }; | |
1e662353 LW |
419 | |
420 | pinctrl { | |
4d4629fc LW |
421 | /* |
422 | * Set this up using hogs, as time goes by and as seems fit, these | |
423 | * can be moved over to being controlled by respective device. | |
424 | */ | |
425 | pinctrl-names = "default"; | |
d0e3bc81 | 426 | pinctrl-0 = <&gbf_snowball_mode>, |
4d4629fc LW |
427 | <&wlan_snowball_mode>; |
428 | ||
a48bf4b9 LW |
429 | ethernet { |
430 | /* | |
431 | * Mux in "SM" which is used for the | |
432 | * SMSC911x Ethernet adapter | |
433 | */ | |
434 | eth_snowball_mode: eth_snowball { | |
435 | snowball_mux { | |
68d41f23 LW |
436 | function = "sm"; |
437 | groups = "sm_b_1"; | |
a48bf4b9 LW |
438 | }; |
439 | /* LAN IRQ pin */ | |
440 | snowball_cfg1 { | |
1637d480 | 441 | pins = "GPIO140_B11"; |
a48bf4b9 LW |
442 | ste,config = <&in_nopull>; |
443 | }; | |
444 | /* LAN reset pin */ | |
445 | snowball_cfg2 { | |
1637d480 | 446 | pins = "GPIO141_C12"; |
a48bf4b9 LW |
447 | ste,config = <&gpio_out_hi>; |
448 | }; | |
449 | ||
450 | }; | |
451 | }; | |
1e662353 LW |
452 | sdi0 { |
453 | sdi0_default_mode: sdi0_default { | |
454 | snowball_mux { | |
68d41f23 LW |
455 | function = "mc0"; |
456 | groups = "mc0dat31dir_a_1"; | |
1e662353 LW |
457 | }; |
458 | snowball_cfg1 { | |
1637d480 | 459 | pins = "GPIO21_AB3"; /* DAT31DIR */ |
1e662353 LW |
460 | ste,config = <&out_hi>; |
461 | }; | |
1d8aca9d LW |
462 | /* SD card detect GPIO pin, extend default state */ |
463 | snowball_cfg2 { | |
464 | pins = "GPIO218_AH11"; | |
465 | ste,config = <&gpio_in_pu>; | |
466 | }; | |
467 | /* VMMCI level-shifter enable */ | |
468 | snowball_cfg3 { | |
469 | pins = "GPIO217_AH12"; | |
470 | ste,config = <&gpio_out_lo>; | |
471 | }; | |
472 | /* VMMCI level-shifter voltage select */ | |
473 | snowball_cfg4 { | |
474 | pins = "GPIO228_AJ6"; | |
475 | ste,config = <&gpio_out_hi>; | |
476 | }; | |
1e662353 LW |
477 | }; |
478 | }; | |
fd8f9eac LW |
479 | ssp0 { |
480 | ssp0_snowball_mode: ssp0_snowball_default { | |
481 | snowball_mux { | |
68d41f23 LW |
482 | function = "ssp0"; |
483 | groups = "ssp0_a_1"; | |
fd8f9eac LW |
484 | }; |
485 | snowball_cfg1 { | |
1637d480 | 486 | pins = "GPIO144_B13"; /* FRM */ |
fd8f9eac LW |
487 | ste,config = <&gpio_out_hi>; |
488 | }; | |
489 | snowball_cfg2 { | |
1637d480 | 490 | pins = "GPIO145_C13"; /* RXD */ |
fd8f9eac LW |
491 | ste,config = <&in_pd>; |
492 | }; | |
493 | snowball_cfg3 { | |
1637d480 | 494 | pins = |
fd8f9eac LW |
495 | "GPIO146_D13", /* TXD */ |
496 | "GPIO143_D12"; /* CLK */ | |
497 | ste,config = <&out_lo>; | |
498 | }; | |
499 | ||
500 | }; | |
501 | }; | |
2f4b84f8 LW |
502 | gpio_led { |
503 | gpioled_snowball_mode: gpioled_default { | |
504 | snowball_cfg1 { | |
1637d480 | 505 | pins = "GPIO142_C11"; |
2f4b84f8 LW |
506 | ste,config = <&gpio_out_hi>; |
507 | }; | |
508 | ||
509 | }; | |
510 | }; | |
4d4629fc LW |
511 | accelerometer { |
512 | accel_snowball_mode: accel_snowball { | |
513 | /* Accelerometer lines */ | |
514 | snowball_cfg1 { | |
1637d480 | 515 | pins = |
4d4629fc LW |
516 | "GPIO163_C20", /* ACCEL_IRQ1 */ |
517 | "GPIO164_B21"; /* ACCEL_IRQ2 */ | |
518 | ste,config = <&gpio_in_pu>; | |
519 | }; | |
520 | }; | |
521 | }; | |
22a93167 LW |
522 | gyro { |
523 | gyro_snowball_mode: gyro_snowball { | |
524 | snowball_cfg1 { | |
525 | pins = | |
526 | "GPIO166_A22", /* DRDY */ | |
527 | "GPIO169_D22"; /* INT */ | |
528 | ste,config = <&gpio_in_pu>; | |
529 | }; | |
530 | }; | |
531 | }; | |
4d4629fc LW |
532 | magnetometer { |
533 | magneto_snowball_mode: magneto_snowball { | |
534 | snowball_cfg1 { | |
1637d480 | 535 | pins = "GPIO165_C21"; /* MAG_DRDY */ |
4d4629fc LW |
536 | ste,config = <&gpio_in_pu>; |
537 | }; | |
538 | }; | |
539 | }; | |
540 | gbf { | |
541 | gbf_snowball_mode: gbf_snowball { | |
542 | /* | |
543 | * GBF (GPS, Bluetooth, FM-radio) interface, | |
544 | * pull low to reset state | |
545 | */ | |
546 | snowball_cfg1 { | |
1637d480 | 547 | pins = "GPIO171_D23"; /* GBF_ENA_RESET */ |
4d4629fc LW |
548 | ste,config = <&gpio_out_lo>; |
549 | }; | |
550 | }; | |
551 | }; | |
552 | wlan { | |
553 | wlan_snowball_mode: wlan_snowball { | |
554 | /* | |
555 | * Activate this mode with the WLAN chip. | |
556 | * These are plain GPIO pins used by WLAN | |
557 | */ | |
558 | snowball_cfg1 { | |
1637d480 | 559 | pins = |
4d4629fc LW |
560 | "GPIO161_D21", /* WLAN_PMU_EN */ |
561 | "GPIO215_AH13"; /* WLAN_ENA */ | |
562 | ste,config = <&gpio_out_lo>; | |
563 | }; | |
564 | snowball_cfg2 { | |
1637d480 | 565 | pins = "GPIO216_AG12"; /* WLAN_IRQ */ |
4d4629fc LW |
566 | ste,config = <&gpio_in_pu>; |
567 | }; | |
568 | }; | |
569 | }; | |
1e662353 | 570 | }; |
817a5b96 LW |
571 | |
572 | mcde@a0350000 { | |
573 | pinctrl-names = "default", "sleep"; | |
574 | pinctrl-0 = <&lcd_default_mode>; | |
575 | pinctrl-1 = <&lcd_sleep_mode>; | |
576 | }; | |
2d334297 AB |
577 | }; |
578 | }; |