[linux-2.6-block.git] / arch / arm / boot / dts / ste-href-ab8500.dtsi

/*
 * Copyright 2014 Linaro Ltd.
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
 * Version 2 or later at the following locations:
 *
 * http://www.opensource.org/licenses/gpl-license.html
 * http://www.gnu.org/copyleft/gpl.html
 */

/ {
	soc {
		prcmu@80157000 {
			ab8500 {
				ab8500-gpio {
					/* Hog a few default settings */
					pinctrl-names = "default";
					pinctrl-0 = <&gpio2_default_mode>,
						    <&gpio4_default_mode>,
						    <&gpio10_default_mode>,
						    <&gpio11_default_mode>,
						    <&gpio12_default_mode>,
						    <&gpio13_default_mode>,
						    <&gpio16_default_mode>,
						    <&gpio24_default_mode>,
						    <&gpio25_default_mode>,
						    <&gpio36_default_mode>,
						    <&gpio37_default_mode>,
						    <&gpio38_default_mode>,
						    <&gpio39_default_mode>,
						    <&gpio42_default_mode>,
						    <&gpio26_default_mode>,
						    <&gpio35_default_mode>,
						    <&ycbcr_default_mode>,
						    <&pwm_default_mode>,
						    <&adi1_default_mode>,
						    <&usbuicc_default_mode>;

					/*
					 * Pins 2, 4, 10, 11, 12, 13, 16, 24, 25, 36, 37, 38, 39 and 42
					 * are muxed in as GPIO, and configured as INPUT PULL DOWN
					 */
					gpio2 {
						gpio2_default_mode: gpio2_default {
							default_mux {
								ste,function = "gpio";
								ste,pins = "gpio2_a_1";
							};
							default_cfg {
								ste,pins = "GPIO2_T9";
								input-enable;
								bias-pull-down;
							};
						};
					};
					gpio4 {
						gpio4_default_mode: gpio4_default {
							default_mux {
								ste,function = "gpio";
								ste,pins = "gpio4_a_1";
							};
							default_cfg {
								ste,pins = "GPIO4_W2";
								input-enable;
								bias-pull-down;
							};
						};
					};
					gpio10 {
						gpio10_default_mode: gpio10_default {
							default_mux {
								ste,function = "gpio";
								ste,pins = "gpio10_d_1";
							};
							default_cfg {
								ste,pins = "GPIO10_U17";
								input-enable;
								bias-pull-down;
							};
						};
					};
					gpio11 {
						gpio11_default_mode: gpio11_default {
							default_mux {
								ste,function = "gpio";
								ste,pins = "gpio11_d_1";
							};
							default_cfg {
								ste,pins = "GPIO11_AA18";
								input-enable;
								bias-pull-down;
							};
						};
					};
					gpio12 {
						gpio12_default_mode: gpio12_default {
							default_mux {
								ste,function = "gpio";
								ste,pins = "gpio12_d_1";
							};
							default_cfg {
								ste,pins = "GPIO12_U16";
								input-enable;
								bias-pull-down;
							};
						};
					};
					gpio13 {
						gpio13_default_mode: gpio13_default {
							default_mux {
								ste,function = "gpio";
								ste,pins = "gpio13_d_1";
							};
							default_cfg {
								ste,pins = "GPIO13_W17";
								input-enable;
								bias-pull-down;
							};
						};
					};
					gpio16 {
						gpio16_default_mode: gpio16_default {
							default_mux {
								ste,function = "gpio";
								ste,pins = "gpio16_a_1";
							};
							default_cfg {
								ste,pins = "GPIO16_F15";
								input-enable;
								bias-pull-down;
							};
						};
					};
					gpio24 {
						gpio24_default_mode: gpio24_default {
							default_mux {
								ste,function = "gpio";
								ste,pins = "gpio24_a_1";
							};
							default_cfg {
								ste,pins = "GPIO24_T14";
								input-enable;
								bias-pull-down;
							};
						};
					};
					gpio25 {
						gpio25_default_mode: gpio25_default {
							default_mux {
								ste,function = "gpio";
								ste,pins = "gpio25_a_1";
							};
							default_cfg {
								ste,pins = "GPIO25_R16";
								input-enable;
								bias-pull-down;
							};
						};
					};
					gpio36 {
						gpio36_default_mode: gpio36_default {
							default_mux {
								ste,function = "gpio";
								ste,pins = "gpio36_a_1";
							};
							default_cfg {
								ste,pins = "GPIO36_A17";
								input-enable;
								bias-pull-down;
							};
						};
					};
					gpio37 {
						gpio37_default_mode: gpio37_default {
							default_mux {
								ste,function = "gpio";
								ste,pins = "gpio37_a_1";
							};
							default_cfg {
								ste,pins = "GPIO37_E15";
								input-enable;
								bias-pull-down;
							};
						};
					};
					gpio38 {
						gpio38_default_mode: gpio38_default {
							default_mux {
								ste,function = "gpio";
								ste,pins = "gpio38_a_1";
							};
							default_cfg {
								ste,pins = "GPIO38_C17";
								input-enable;
								bias-pull-down;
							};
						};
					};
					gpio39 {
						gpio39_default_mode: gpio39_default {
							default_mux {
								ste,function = "gpio";
								ste,pins = "gpio39_a_1";
							};
							default_cfg {
								ste,pins = "GPIO39_E16";
								input-enable;
								bias-pull-down;
							};
						};
					};
					gpio42 {
						gpio42_default_mode: gpio42_default {
							default_mux {
								ste,function = "gpio";
								ste,pins = "gpio42_a_1";
							};
							default_cfg {
								ste,pins = "GPIO42_U2";
								input-enable;
								bias-pull-down;
							};
						};
					};
					/*
					 * Pins 26 and 35 muxed in as GPIO, and configured as OUTPUT LOW
					 */
					gpio26 {
						gpio26_default_mode: gpio26_default {
							default_mux {
								ste,function = "gpio";
								ste,pins = "gpio26_d_1";
							};
							default_cfg {
								ste,pins = "GPIO26_M16";
								output-low;
							};
						};
					};
					gpio35 {
						gpio35_default_mode: gpio35_default {
							default_mux {
								ste,function = "gpio";
								ste,pins = "gpio35_d_1";
							};
							default_cfg {
								ste,pins = "GPIO35_W15";
								output-low;
							};
						};
					};
					/*
					 * This sets up the YCBCR connector pins, i.e. analog video out.
					 * Set as input with no bias.
					 */
					ycbcr {
						ycbcr_default_mode: ycbcr_default {
							default_mux {
								ste,function = "ycbcr";
								ste,pins = "ycbcr0123_d_1";
							};
							default_cfg {
								ste,pins = "GPIO6_Y18",
									 "GPIO7_AA20",
									 "GPIO8_W18",
									 "GPIO9_AA19";
								input-enable;
								bias-disable;
							};
						};
					};
					/* This sets up the PWM pins 14 and 15 */
					pwm {
						pwm_default_mode: pwm_default {
							default_mux {
								ste,function = "pwmout";
								ste,pins = "pwmout1_d_1", "pwmout2_d_1";
							};
							default_cfg {
								ste,pins = "GPIO14_F14",
									 "GPIO15_B17";
								input-enable;
								bias-pull-down;
							};
						};
					};
					/* This sets up audio interface 1 */
					adi1 {
						adi1_default_mode: adi1_default {
							default_mux {
								ste,function = "adi1";
								ste,pins = "adi1_d_1";
							};
							default_cfg {
								ste,pins = "GPIO17_P5",
									 "GPIO18_R5",
									 "GPIO19_U5",
									 "GPIO20_T5";
								input-enable;
								bias-pull-down;
							};
						};
					};
					/* This sets up the USB UICC pins */
					usbuicc {
						usbuicc_default_mode: usbuicc_default {
							default_mux {
								ste,function = "usbuicc";
								ste,pins = "usbuicc_d_1";
							};
							default_cfg {
								ste,pins = "GPIO21_H19",
									 "GPIO22_G20",
									 "GPIO23_G19";
								input-enable;
								bias-pull-down;
							};
						};
					};
				};
			};
		};
	};
};
Commit	Line	Data
83200629 LW	1	/*
	2	* Copyright 2014 Linaro Ltd.
	3	*
	4	* The code contained herein is licensed under the GNU General Public
	5	* License. You may obtain a copy of the GNU General Public License
	6	* Version 2 or later at the following locations:
	7	*
	8	* http://www.opensource.org/licenses/gpl-license.html
	9	* http://www.gnu.org/copyleft/gpl.html
	10	*/
	11
	12	/ {
	13	soc {
	14	prcmu@80157000 {
	15	ab8500 {
	16	ab8500-gpio {
	17	/* Hog a few default settings */
	18	pinctrl-names = "default";
	19	pinctrl-0 = <&gpio2_default_mode>,
	20	<&gpio4_default_mode>,
	21	<&gpio10_default_mode>,
	22	<&gpio11_default_mode>,
	23	<&gpio12_default_mode>,
	24	<&gpio13_default_mode>,
	25	<&gpio16_default_mode>,
	26	<&gpio24_default_mode>,
	27	<&gpio25_default_mode>,
	28	<&gpio36_default_mode>,
	29	<&gpio37_default_mode>,
	30	<&gpio38_default_mode>,
	31	<&gpio39_default_mode>,
	32	<&gpio42_default_mode>,
	33	<&gpio26_default_mode>,
fd385b33	34	<&gpio35_default_mode>,
e2377c81	35	<&ycbcr_default_mode>,
b2985cf7	36	<&pwm_default_mode>,
c7bb47aa LW	37	<&adi1_default_mode>,
c7bb47aa LW	38	<&usbuicc_default_mode>;
83200629 LW	39
	40	/*
	41	* Pins 2, 4, 10, 11, 12, 13, 16, 24, 25, 36, 37, 38, 39 and 42
	42	* are muxed in as GPIO, and configured as INPUT PULL DOWN
	43	*/
	44	gpio2 {
	45	gpio2_default_mode: gpio2_default {
	46	default_mux {
	47	ste,function = "gpio";
	48	ste,pins = "gpio2_a_1";
	49	};
	50	default_cfg {
	51	ste,pins = "GPIO2_T9";
	52	input-enable;
	53	bias-pull-down;
	54	};
	55	};
	56	};
	57	gpio4 {
	58	gpio4_default_mode: gpio4_default {
	59	default_mux {
	60	ste,function = "gpio";
	61	ste,pins = "gpio4_a_1";
	62	};
	63	default_cfg {
	64	ste,pins = "GPIO4_W2";
	65	input-enable;
	66	bias-pull-down;
	67	};
	68	};
	69	};
	70	gpio10 {
	71	gpio10_default_mode: gpio10_default {
	72	default_mux {
	73	ste,function = "gpio";
	74	ste,pins = "gpio10_d_1";
	75	};
	76	default_cfg {
	77	ste,pins = "GPIO10_U17";
	78	input-enable;
	79	bias-pull-down;
	80	};
	81	};
	82	};
	83	gpio11 {
	84	gpio11_default_mode: gpio11_default {
	85	default_mux {
	86	ste,function = "gpio";
	87	ste,pins = "gpio11_d_1";
	88	};
	89	default_cfg {
	90	ste,pins = "GPIO11_AA18";
	91	input-enable;
	92	bias-pull-down;
	93	};
	94	};
	95	};
	96	gpio12 {
	97	gpio12_default_mode: gpio12_default {
	98	default_mux {
	99	ste,function = "gpio";
	100	ste,pins = "gpio12_d_1";
	101	};
	102	default_cfg {
103	ste,pins = "GPIO12_U16";
104	input-enable;
105	bias-pull-down;
106	};
107	};
108	};
109	gpio13 {
110	gpio13_default_mode: gpio13_default {
111	default_mux {
112	ste,function = "gpio";
113	ste,pins = "gpio13_d_1";
114	};
115	default_cfg {
116	ste,pins = "GPIO13_W17";
117	input-enable;
118	bias-pull-down;
119	};
120	};
121	};
122	gpio16 {
123	gpio16_default_mode: gpio16_default {
124	default_mux {
125	ste,function = "gpio";
126	ste,pins = "gpio16_a_1";
127	};
128	default_cfg {
129	ste,pins = "GPIO16_F15";
130	input-enable;
131	bias-pull-down;
132	};
133	};
134	};
135	gpio24 {
136	gpio24_default_mode: gpio24_default {
137	default_mux {
138	ste,function = "gpio";
139	ste,pins = "gpio24_a_1";
140	};
141	default_cfg {
142	ste,pins = "GPIO24_T14";
143	input-enable;
144	bias-pull-down;
145	};
146	};
147	};
148	gpio25 {
149	gpio25_default_mode: gpio25_default {
150	default_mux {
151	ste,function = "gpio";
152	ste,pins = "gpio25_a_1";
153	};
154	default_cfg {
155	ste,pins = "GPIO25_R16";
156	input-enable;
157	bias-pull-down;
158	};
159	};
160	};
161	gpio36 {
162	gpio36_default_mode: gpio36_default {
163	default_mux {
164	ste,function = "gpio";
165	ste,pins = "gpio36_a_1";
166	};
167	default_cfg {
168	ste,pins = "GPIO36_A17";
169	input-enable;
170	bias-pull-down;
171	};
172	};
173	};
174	gpio37 {
175	gpio37_default_mode: gpio37_default {
176	default_mux {
177	ste,function = "gpio";
178	ste,pins = "gpio37_a_1";
179	};
180	default_cfg {
181	ste,pins = "GPIO37_E15";
182	input-enable;
183	bias-pull-down;
184	};
185	};
186	};
187	gpio38 {
188	gpio38_default_mode: gpio38_default {
189	default_mux {
190	ste,function = "gpio";
191	ste,pins = "gpio38_a_1";
192	};
193	default_cfg {
194	ste,pins = "GPIO38_C17";
195	input-enable;
196	bias-pull-down;
197	};
198	};
199	};
200	gpio39 {
201	gpio39_default_mode: gpio39_default {
202	default_mux {
203	ste,function = "gpio";
204	ste,pins = "gpio39_a_1";
205	};
206	default_cfg {
207	ste,pins = "GPIO39_E16";
208	input-enable;
209	bias-pull-down;
210	};
211	};
212	};
213	gpio42 {
214	gpio42_default_mode: gpio42_default {
215	default_mux {
216	ste,function = "gpio";
217	ste,pins = "gpio42_a_1";
218	};
219	default_cfg {
220	ste,pins = "GPIO42_U2";
221	input-enable;
222	bias-pull-down;
223	};
224	};
225	};
226	/*
227	* Pins 26 and 35 muxed in as GPIO, and configured as OUTPUT LOW
228	*/
229	gpio26 {
230	gpio26_default_mode: gpio26_default {
231	default_mux {
232	ste,function = "gpio";
233	ste,pins = "gpio26_d_1";
234	};
235	default_cfg {
236	ste,pins = "GPIO26_M16";
237	output-low;
238	};
239	};
240	};
241	gpio35 {
242	gpio35_default_mode: gpio35_default {
243	default_mux {
244	ste,function = "gpio";
245	ste,pins = "gpio35_d_1";
246	};
247	default_cfg {
248	ste,pins = "GPIO35_W15";
249	output-low;
250	};
251	};
252	};
fd385b33 LW	253	/*
	254	* This sets up the YCBCR connector pins, i.e. analog video out.
	255	* Set as input with no bias.
	256	*/
	257	ycbcr {
	258	ycbcr_default_mode: ycbcr_default {
	259	default_mux {
	260	ste,function = "ycbcr";
	261	ste,pins = "ycbcr0123_d_1";
	262	};
	263	default_cfg {
	264	ste,pins = "GPIO6_Y18",
	265	"GPIO7_AA20",
	266	"GPIO8_W18",
	267	"GPIO9_AA19";
	268	input-enable;
	269	bias-disable;
	270	};
	271	};
	272	};
e2377c81 LW	273	/* This sets up the PWM pins 14 and 15 */
	274	pwm {
	275	pwm_default_mode: pwm_default {
	276	default_mux {
	277	ste,function = "pwmout";
	278	ste,pins = "pwmout1_d_1", "pwmout2_d_1";
	279	};
	280	default_cfg {
	281	ste,pins = "GPIO14_F14",
	282	"GPIO15_B17";
	283	input-enable;
	284	bias-pull-down;
	285	};
	286	};
	287	};
b2985cf7 LW	288	/* This sets up audio interface 1 */
	289	adi1 {
	290	adi1_default_mode: adi1_default {
	291	default_mux {
	292	ste,function = "adi1";
	293	ste,pins = "adi1_d_1";
	294	};
	295	default_cfg {
	296	ste,pins = "GPIO17_P5",
	297	"GPIO18_R5",
	298	"GPIO19_U5",
	299	"GPIO20_T5";
	300	input-enable;
	301	bias-pull-down;
	302	};
	303	};
	304	};
c7bb47aa LW	305	/* This sets up the USB UICC pins */
	306	usbuicc {
	307	usbuicc_default_mode: usbuicc_default {
	308	default_mux {
	309	ste,function = "usbuicc";
	310	ste,pins = "usbuicc_d_1";
	311	};
	312	default_cfg {
	313	ste,pins = "GPIO21_H19",
	314	"GPIO22_G20",
	315	"GPIO23_G19";
	316	input-enable;
	317	bias-pull-down;
	318	};
	319	};
	320	};
83200629 LW	321	};
	322	};
	323	};
	324	};
	325	};