[linux-2.6-block.git] / arch / arm / boot / dts / rk3288-popmetal.dts

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (c) 2014, 2015 Andy Yan <andy.yan@rock-chips.com>
 */

/dts-v1/;
#include <dt-bindings/input/input.h>
#include "rk3288.dtsi"

/ {
	model = "PopMetal-RK3288";
	compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";

	memory@0 {
		device_type = "memory";
		reg = <0x0 0x0 0x0 0x80000000>;
	};

	ext_gmac: external-gmac-clock {
		compatible = "fixed-clock";
		clock-frequency = <125000000>;
		clock-output-names = "ext_gmac";
		#clock-cells = <0>;
	};

	gpio-keys {
		compatible = "gpio-keys";
		autorepeat;

		pinctrl-names = "default";
		pinctrl-0 = <&pwrbtn>;

		power {
			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_POWER>;
			label = "GPIO Key Power";
			linux,input-type = <1>;
			wakeup-source;
			debounce-interval = <100>;
		};
	};

	ir: ir-receiver {
		compatible = "gpio-ir-receiver";
		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&ir_int>;
	};

	vcc_flash: flash-regulator {
		compatible = "regulator-fixed";
		regulator-name = "vcc_flash";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		vin-supply = <&vcc_io>;
	};

	vcc_sd: sdmmc-regulator {
		compatible = "regulator-fixed";
		gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&sdmmc_pwr>;
		regulator-name = "vcc_sd";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		startup-delay-us = <100000>;
		vin-supply = <&vcc_io>;
	};

	vcc_sys: vsys-regulator {
		compatible = "regulator-fixed";
		regulator-name = "vcc_sys";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		regulator-always-on;
		regulator-boot-on;
	};

	/*
	 * A PT5128 creates both dovdd_1v8 and vcc28_dvp, controlled
	 * by the dvp_pwr pin.
	 */
	vcc18_dvp: vcc18-dvp-regulator {
		compatible = "regulator-fixed";
		regulator-name = "vcc18-dvp";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		vin-supply = <&vcc28_dvp>;
	};

	vcc28_dvp: vcc28-dvp-regulator {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&dvp_pwr>;
		regulator-name = "vcc28_dvp";
		regulator-min-microvolt = <2800000>;
		regulator-max-microvolt = <2800000>;
		regulator-always-on;
		vin-supply = <&vcc_io>;
	};
};

&cpu0 {
	cpu0-supply = <&vdd_cpu>;
};

&emmc {
	bus-width = <8>;
	cap-mmc-highspeed;
	disable-wp;
	mmc-ddr-1_8v;
	mmc-hs200-1_8v;
	non-removable;
	pinctrl-names = "default";
	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
	vmmc-supply = <&vcc_io>;
	vqmmc-supply = <&vcc_flash>;
	status = "okay";
};

&sdmmc {
	bus-width = <4>;
	cap-mmc-highspeed;
	cap-sd-highspeed;
	card-detect-delay = <200>;
	disable-wp;                     /* wp not hooked up */
	pinctrl-names = "default";
	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
	sd-uhs-sdr12;
	sd-uhs-sdr25;
	sd-uhs-sdr50;
	sd-uhs-sdr104;
	vmmc-supply = <&vcc_sd>;
	vqmmc-supply = <&vccio_sd>;
	status = "okay";
};

&gmac {
	phy-supply = <&vcc_lan>;
	phy-mode = "rgmii";
	clock_in_out = "input";
	snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
	snps,reset-active-low;
	snps,reset-delays-us = <0 10000 1000000>;
	assigned-clocks = <&cru SCLK_MAC>;
	assigned-clock-parents = <&ext_gmac>;
	pinctrl-names = "default";
	pinctrl-0 = <&rgmii_pins>;
	tx_delay = <0x30>;
	rx_delay = <0x10>;
	status = "ok";
};

&hdmi {
	ddc-i2c-bus = <&i2c5>;
	status = "okay";
};

&i2c0 {
	status = "okay";
	clock-frequency = <400000>;

	rk808: pmic@1b {
		compatible = "rockchip,rk808";
		reg = <0x1b>;
		interrupt-parent = <&gpio0>;
		interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&pmic_int &global_pwroff>;
		rockchip,system-power-controller;
		wakeup-source;
		#clock-cells = <1>;
		clock-output-names = "xin32k", "rk808-clkout2";

		vcc1-supply = <&vcc_sys>;
		vcc2-supply = <&vcc_sys>;
		vcc3-supply = <&vcc_sys>;
		vcc4-supply = <&vcc_sys>;
		vcc6-supply = <&vcc_sys>;
		vcc7-supply = <&vcc_sys>;
		vcc8-supply = <&vcc_18>;
		vcc9-supply = <&vcc_io>;
		vcc10-supply = <&vcc_io>;
		vcc11-supply = <&vcc_sys>;
		vcc12-supply = <&vcc_io>;
		vddio-supply = <&vcc_io>;

		regulators {
			vdd_cpu: DCDC_REG1 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <750000>;
				regulator-max-microvolt = <1350000>;
				regulator-name = "vdd_arm";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdd_gpu: DCDC_REG2 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <850000>;
				regulator-max-microvolt = <1250000>;
				regulator-name = "vdd_gpu";
				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <1000000>;
				};
			};

			vcc_ddr: DCDC_REG3 {
				regulator-always-on;
				regulator-boot-on;
				regulator-name = "vcc_ddr";
				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vcc_io: DCDC_REG4 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vcc_io";
				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <3300000>;
				};
			};

			vcc_lan: LDO_REG1 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vcc_lan";
				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <3300000>;
				};
			};

			vccio_sd: LDO_REG2 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vccio_sd";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdd_10: LDO_REG3 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <1000000>;
				regulator-name = "vdd_10";
				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <1000000>;
				};
			};

			vcc18_lcd: LDO_REG4 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcc18_lcd";
				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <1800000>;
				};
			};

			ldo5: LDO_REG5 {
				regulator-always-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "ldo5";
			};

			vdd10_lcd: LDO_REG6 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <1000000>;
				regulator-name = "vdd10_lcd";
				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <1000000>;
				};
			};

			vcc_18: LDO_REG7 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcc_18";
				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <1800000>;
				};
			};

			vcca_33: LDO_REG8 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vcca_33";
				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <3300000>;
				};
			};

			vccio_wl: SWITCH_REG1 {
				regulator-always-on;
				regulator-boot-on;
				regulator-name = "vccio_wl";
				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vcc_lcd: SWITCH_REG2 {
				regulator-always-on;
				regulator-boot-on;
				regulator-name = "vcc_lcd";
				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};
		};
	};
};

&i2c1 {
	status = "okay";
	clock-frequency = <400000>;

	ak8963: ak8963@d {
		compatible = "asahi-kasei,ak8975";
		reg = <0x0d>;
		interrupt-parent = <&gpio8>;
		interrupts = <RK_PA1 IRQ_TYPE_EDGE_RISING>;
		pinctrl-names = "default";
		pinctrl-0 = <&comp_int>;
		vdd-supply = <&vcc_io>;
		vid-supply = <&vcc_io>;
	};

	l3g4200d: l3g4200d@69 {
		compatible = "st,l3g4200d-gyro";
		st,drdy-int-pin = <2>;
		reg = <0x69>;
		vdd-supply = <&vcc_io>;
		vddio-supply = <&vcc_io>;
	};

	mma8452: mma8452@1d {
		compatible = "fsl,mma8452";
		reg = <0x1d>;
		interrupt-parent = <&gpio8>;
		interrupts = <RK_PA0 IRQ_TYPE_EDGE_RISING>;
		pinctrl-names = "default";
		pinctrl-0 = <&gsensor_int>;
	};
};

&i2c2 {
	status = "okay";
};

&i2c3 {
	status = "okay";
};

&i2c4 {
	status = "okay";
};

&i2c5 {
	status = "okay";
};

&io_domains {
	status = "okay";

	audio-supply = <&vcca_33>;
	bb-supply = <&vcc_io>;
	dvp-supply = <&vcc18_dvp>;
	flash0-supply = <&vcc_flash>;
	flash1-supply = <&vcc_lan>;
	gpio30-supply = <&vcc_io>;
	gpio1830-supply = <&vcc_io>;
	lcdc-supply = <&vcc_io>;
	sdcard-supply = <&vccio_sd>;
	wifi-supply = <&vccio_wl>;
};

&pinctrl {
	ak8963 {
		comp_int: comp-int {
			rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	buttons {
		pwrbtn: pwrbtn {
			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	dvp {
		dvp_pwr: dvp-pwr {
			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	ir {
		ir_int: ir-int {
			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	mma8452 {
		gsensor_int: gsensor-int {
			rockchip,pins = <8 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	pmic {
		pmic_int: pmic-int {
			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	sdmmc {
		sdmmc_pwr: sdmmc-pwr {
			rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};
};

&tsadc {
	rockchip,hw-tshut-mode = <0>;
	rockchip,hw-tshut-polarity = <0>;
	status = "okay";
};

&vopb {
	status = "okay";
};

&vopb_mmu {
	status = "okay";
};

&vopl {
	status = "okay";
};

&vopl_mmu {
	status = "okay";
};

&uart0 {
	status = "okay";
};

&uart1 {
	status = "okay";
};

&uart2 {
	status = "okay";
};

&uart3 {
	status = "okay";
};

&uart4 {
	status = "okay";
};

&usbphy {
	status = "okay";
};

&usb_otg {
	status = "okay";
};
Commit	Line	Data
fce152a6	1	// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
c38e1328 AY	2	/*
c38e1328 AY	3	* Copyright (c) 2014, 2015 Andy Yan <andy.yan@rock-chips.com>
c38e1328 AY	4	*/
	5
	6	/dts-v1/;
8b30c899	7	#include <dt-bindings/input/input.h>
c38e1328 AY	8	#include "rk3288.dtsi"
	9
	10	/ {
	11	model = "PopMetal-RK3288";
	12	compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
	13
0b639b81	14	memory@0 {
6158e6d0	15	device_type = "memory";
79db45be	16	reg = <0x0 0x0 0x0 0x80000000>;
c38e1328 AY	17	};
	18
	19	ext_gmac: external-gmac-clock {
	20	compatible = "fixed-clock";
	21	clock-frequency = <125000000>;
	22	clock-output-names = "ext_gmac";
	23	#clock-cells = <0>;
	24	};
	25
	26	gpio-keys {
	27	compatible = "gpio-keys";
c38e1328 AY	28	autorepeat;
	29
	30	pinctrl-names = "default";
	31	pinctrl-0 = <&pwrbtn>;
	32
8b30c899	33	power {
c959ab8b	34	gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
8b30c899	35	linux,code = <KEY_POWER>;
c38e1328 AY	36	label = "GPIO Key Power";
c38e1328 AY	37	linux,input-type = <1>;
4f66f247	38	wakeup-source;
c38e1328 AY	39	debounce-interval = <100>;
	40	};
	41	};
	42
	43	ir: ir-receiver {
	44	compatible = "gpio-ir-receiver";
c959ab8b	45	gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
c38e1328 AY	46	pinctrl-names = "default";
	47	pinctrl-0 = <&ir_int>;
	48	};
	49
fa1c1932 HS	50	vcc_flash: flash-regulator {
	51	compatible = "regulator-fixed";
	52	regulator-name = "vcc_flash";
	53	regulator-min-microvolt = <1800000>;
	54	regulator-max-microvolt = <1800000>;
	55	vin-supply = <&vcc_io>;
	56	};
	57
	58	vcc_sd: sdmmc-regulator {
	59	compatible = "regulator-fixed";
c959ab8b	60	gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
fa1c1932 HS	61	pinctrl-names = "default";
	62	pinctrl-0 = <&sdmmc_pwr>;
	63	regulator-name = "vcc_sd";
	64	regulator-min-microvolt = <3300000>;
	65	regulator-max-microvolt = <3300000>;
	66	startup-delay-us = <100000>;
	67	vin-supply = <&vcc_io>;
	68	};
	69
c38e1328 AY	70	vcc_sys: vsys-regulator {
	71	compatible = "regulator-fixed";
	72	regulator-name = "vcc_sys";
	73	regulator-min-microvolt = <5000000>;
	74	regulator-max-microvolt = <5000000>;
	75	regulator-always-on;
	76	regulator-boot-on;
	77	};
90f9a541 HS	78
	79	/*
	80	* A PT5128 creates both dovdd_1v8 and vcc28_dvp, controlled
	81	* by the dvp_pwr pin.
	82	*/
	83	vcc18_dvp: vcc18-dvp-regulator {
	84	compatible = "regulator-fixed";
	85	regulator-name = "vcc18-dvp";
	86	regulator-min-microvolt = <1800000>;
	87	regulator-max-microvolt = <1800000>;
	88	vin-supply = <&vcc28_dvp>;
	89	};
	90
	91	vcc28_dvp: vcc28-dvp-regulator {
	92	compatible = "regulator-fixed";
	93	enable-active-high;
c959ab8b	94	gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
90f9a541 HS	95	pinctrl-names = "default";
	96	pinctrl-0 = <&dvp_pwr>;
	97	regulator-name = "vcc28_dvp";
	98	regulator-min-microvolt = <2800000>;
	99	regulator-max-microvolt = <2800000>;
	100	regulator-always-on;
	101	vin-supply = <&vcc_io>;
	102	};
c38e1328 AY	103	};
	104
	105	&cpu0 {
	106	cpu0-supply = <&vdd_cpu>;
	107	};
	108
	109	&emmc {
c38e1328 AY	110	bus-width = <8>;
	111	cap-mmc-highspeed;
	112	disable-wp;
864c9c02 SL	113	mmc-ddr-1_8v;
864c9c02 SL	114	mmc-hs200-1_8v;
c38e1328	115	non-removable;
c38e1328 AY	116	pinctrl-names = "default";
c38e1328 AY	117	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
fa1c1932 HS	118	vmmc-supply = <&vcc_io>;
fa1c1932 HS	119	vqmmc-supply = <&vcc_flash>;
c38e1328 AY	120	status = "okay";
	121	};
	122
	123	&sdmmc {
	124	bus-width = <4>;
	125	cap-mmc-highspeed;
	126	cap-sd-highspeed;
	127	card-detect-delay = <200>;
	128	disable-wp; /* wp not hooked up */
c38e1328 AY	129	pinctrl-names = "default";
c38e1328 AY	130	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
9daa2552 SL	131	sd-uhs-sdr12;
	132	sd-uhs-sdr25;
	133	sd-uhs-sdr50;
	134	sd-uhs-sdr104;
fa1c1932 HS	135	vmmc-supply = <&vcc_sd>;
fa1c1932 HS	136	vqmmc-supply = <&vccio_sd>;
c38e1328 AY	137	status = "okay";
	138	};
	139
	140	&gmac {
	141	phy-supply = <&vcc_lan>;
	142	phy-mode = "rgmii";
	143	clock_in_out = "input";
e9e79d53	144	snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
c38e1328 AY	145	snps,reset-active-low;
	146	snps,reset-delays-us = <0 10000 1000000>;
	147	assigned-clocks = <&cru SCLK_MAC>;
	148	assigned-clock-parents = <&ext_gmac>;
	149	pinctrl-names = "default";
	150	pinctrl-0 = <&rgmii_pins>;
	151	tx_delay = <0x30>;
	152	rx_delay = <0x10>;
	153	status = "ok";
	154	};
	155
	156	&hdmi {
	157	ddc-i2c-bus = <&i2c5>;
	158	status = "okay";
	159	};
	160
	161	&i2c0 {
	162	status = "okay";
	163	clock-frequency = <400000>;
	164
	165	rk808: pmic@1b {
	166	compatible = "rockchip,rk808";
	167	reg = <0x1b>;
	168	interrupt-parent = <&gpio0>;
e9e79d53	169	interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
c38e1328 AY	170	pinctrl-names = "default";
	171	pinctrl-0 = <&pmic_int &global_pwroff>;
	172	rockchip,system-power-controller;
	173	wakeup-source;
	174	#clock-cells = <1>;
	175	clock-output-names = "xin32k", "rk808-clkout2";
	176
	177	vcc1-supply = <&vcc_sys>;
	178	vcc2-supply = <&vcc_sys>;
	179	vcc3-supply = <&vcc_sys>;
	180	vcc4-supply = <&vcc_sys>;
	181	vcc6-supply = <&vcc_sys>;
	182	vcc7-supply = <&vcc_sys>;
	183	vcc8-supply = <&vcc_18>;
	184	vcc9-supply = <&vcc_io>;
	185	vcc10-supply = <&vcc_io>;
	186	vcc11-supply = <&vcc_sys>;
	187	vcc12-supply = <&vcc_io>;
	188	vddio-supply = <&vcc_io>;
	189
	190	regulators {
	191	vdd_cpu: DCDC_REG1 {
	192	regulator-always-on;
	193	regulator-boot-on;
	194	regulator-min-microvolt = <750000>;
	195	regulator-max-microvolt = <1350000>;
	196	regulator-name = "vdd_arm";
	197	regulator-state-mem {
	198	regulator-off-in-suspend;
	199	};
	200	};
	201
	202	vdd_gpu: DCDC_REG2 {
	203	regulator-always-on;
	204	regulator-boot-on;
	205	regulator-min-microvolt = <850000>;
	206	regulator-max-microvolt = <1250000>;
	207	regulator-name = "vdd_gpu";
	208	regulator-state-mem {
	209	regulator-on-in-suspend;
	210	regulator-suspend-microvolt = <1000000>;
	211	};
	212	};
	213
	214	vcc_ddr: DCDC_REG3 {
	215	regulator-always-on;
	216	regulator-boot-on;
	217	regulator-name = "vcc_ddr";
	218	regulator-state-mem {
	219	regulator-on-in-suspend;
	220	};
	221	};
	222
	223	vcc_io: DCDC_REG4 {
	224	regulator-always-on;
	225	regulator-boot-on;
	226	regulator-min-microvolt = <3300000>;
	227	regulator-max-microvolt = <3300000>;
	228	regulator-name = "vcc_io";
	229	regulator-state-mem {
	230	regulator-on-in-suspend;
	231	regulator-suspend-microvolt = <3300000>;
	232	};
	233	};
234
235	vcc_lan: LDO_REG1 {
236	regulator-always-on;
237	regulator-boot-on;
238	regulator-min-microvolt = <3300000>;
239	regulator-max-microvolt = <3300000>;
240	regulator-name = "vcc_lan";
241	regulator-state-mem {
242	regulator-on-in-suspend;
243	regulator-suspend-microvolt = <3300000>;
244	};
245	};
246
247	vccio_sd: LDO_REG2 {
248	regulator-always-on;
249	regulator-boot-on;
9daa2552	250	regulator-min-microvolt = <1800000>;
c38e1328 AY	251	regulator-max-microvolt = <3300000>;
	252	regulator-name = "vccio_sd";
	253	regulator-state-mem {
	254	regulator-off-in-suspend;
	255	};
	256	};
	257
	258	vdd_10: LDO_REG3 {
	259	regulator-always-on;
	260	regulator-boot-on;
	261	regulator-min-microvolt = <1000000>;
	262	regulator-max-microvolt = <1000000>;
	263	regulator-name = "vdd_10";
	264	regulator-state-mem {
	265	regulator-on-in-suspend;
	266	regulator-suspend-microvolt = <1000000>;
	267	};
	268	};
	269
	270	vcc18_lcd: LDO_REG4 {
	271	regulator-always-on;
	272	regulator-boot-on;
	273	regulator-min-microvolt = <1800000>;
	274	regulator-max-microvolt = <1800000>;
	275	regulator-name = "vcc18_lcd";
	276	regulator-state-mem {
	277	regulator-on-in-suspend;
	278	regulator-suspend-microvolt = <1800000>;
	279	};
	280	};
	281
	282	ldo5: LDO_REG5 {
	283	regulator-always-on;
	284	regulator-min-microvolt = <1800000>;
	285	regulator-max-microvolt = <3300000>;
	286	regulator-name = "ldo5";
	287	};
	288
	289	vdd10_lcd: LDO_REG6 {
	290	regulator-always-on;
	291	regulator-boot-on;
	292	regulator-min-microvolt = <1000000>;
	293	regulator-max-microvolt = <1000000>;
	294	regulator-name = "vdd10_lcd";
	295	regulator-state-mem {
	296	regulator-on-in-suspend;
	297	regulator-suspend-microvolt = <1000000>;
	298	};
	299	};
	300
	301	vcc_18: LDO_REG7 {
	302	regulator-always-on;
	303	regulator-boot-on;
	304	regulator-min-microvolt = <1800000>;
	305	regulator-max-microvolt = <1800000>;
	306	regulator-name = "vcc_18";
	307	regulator-state-mem {
	308	regulator-on-in-suspend;
	309	regulator-suspend-microvolt = <1800000>;
	310	};
	311	};
	312
90f9a541	313	vcca_33: LDO_REG8 {
c38e1328 AY	314	regulator-always-on;
	315	regulator-boot-on;
	316	regulator-min-microvolt = <3300000>;
	317	regulator-max-microvolt = <3300000>;
90f9a541	318	regulator-name = "vcca_33";
c38e1328 AY	319	regulator-state-mem {
	320	regulator-on-in-suspend;
	321	regulator-suspend-microvolt = <3300000>;
	322	};
	323	};
	324
90f9a541	325	vccio_wl: SWITCH_REG1 {
c38e1328 AY	326	regulator-always-on;
c38e1328 AY	327	regulator-boot-on;
90f9a541	328	regulator-name = "vccio_wl";
c38e1328 AY	329	regulator-state-mem {
	330	regulator-on-in-suspend;
	331	};
	332	};
	333
	334	vcc_lcd: SWITCH_REG2 {
	335	regulator-always-on;
	336	regulator-boot-on;
	337	regulator-name = "vcc_lcd";
	338	regulator-state-mem {
	339	regulator-on-in-suspend;
	340	};
	341	};
	342	};
	343	};
	344	};
	345
	346	&i2c1 {
	347	status = "okay";
	348	clock-frequency = <400000>;
	349
8dccafaa	350	ak8963: ak8963@d {
c38e1328 AY	351	compatible = "asahi-kasei,ak8975";
	352	reg = <0x0d>;
	353	interrupt-parent = <&gpio8>;
e9e79d53	354	interrupts = <RK_PA1 IRQ_TYPE_EDGE_RISING>;
c38e1328 AY	355	pinctrl-names = "default";
c38e1328 AY	356	pinctrl-0 = <&comp_int>;
4314f4b6 AY	357	vdd-supply = <&vcc_io>;
4314f4b6 AY	358	vid-supply = <&vcc_io>;
c38e1328 AY	359	};
c38e1328 AY	360
9369554d	361	l3g4200d: l3g4200d@69 {
c38e1328 AY	362	compatible = "st,l3g4200d-gyro";
c38e1328 AY	363	st,drdy-int-pin = <2>;
9369554d	364	reg = <0x69>;
4314f4b6 AY	365	vdd-supply = <&vcc_io>;
4314f4b6 AY	366	vddio-supply = <&vcc_io>;
c38e1328 AY	367	};
	368
	369	mma8452: mma8452@1d {
	370	compatible = "fsl,mma8452";
	371	reg = <0x1d>;
	372	interrupt-parent = <&gpio8>;
e9e79d53	373	interrupts = <RK_PA0 IRQ_TYPE_EDGE_RISING>;
c38e1328 AY	374	pinctrl-names = "default";
	375	pinctrl-0 = <&gsensor_int>;
	376	};
	377	};
	378
	379	&i2c2 {
	380	status = "okay";
	381	};
	382
	383	&i2c3 {
	384	status = "okay";
	385	};
	386
	387	&i2c4 {
	388	status = "okay";
	389	};
	390
	391	&i2c5 {
	392	status = "okay";
	393	};
	394
3445b2fa HS	395	&io_domains {
	396	status = "okay";
	397
	398	audio-supply = <&vcca_33>;
	399	bb-supply = <&vcc_io>;
	400	dvp-supply = <&vcc18_dvp>;
	401	flash0-supply = <&vcc_flash>;
	402	flash1-supply = <&vcc_lan>;
	403	gpio30-supply = <&vcc_io>;
	404	gpio1830-supply = <&vcc_io>;
	405	lcdc-supply = <&vcc_io>;
	406	sdcard-supply = <&vccio_sd>;
	407	wifi-supply = <&vccio_wl>;
	408	};
	409
c38e1328 AY	410	&pinctrl {
	411	ak8963 {
	412	comp_int: comp-int {
c959ab8b	413	rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
c38e1328 AY	414	};
	415	};
	416
	417	buttons {
	418	pwrbtn: pwrbtn {
c959ab8b	419	rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
c38e1328 AY	420	};
	421	};
	422
90f9a541 HS	423	dvp {
90f9a541 HS	424	dvp_pwr: dvp-pwr {
c959ab8b	425	rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
90f9a541 HS	426	};
	427	};
	428
c38e1328 AY	429	ir {
c38e1328 AY	430	ir_int: ir-int {
c959ab8b	431	rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
c38e1328 AY	432	};
	433	};
	434
	435	mma8452 {
	436	gsensor_int: gsensor-int {
c959ab8b	437	rockchip,pins = <8 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
c38e1328 AY	438	};
	439	};
	440
	441	pmic {
	442	pmic_int: pmic-int {
c959ab8b	443	rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
c38e1328 AY	444	};
c38e1328 AY	445	};
fa1c1932 HS	446
	447	sdmmc {
	448	sdmmc_pwr: sdmmc-pwr {
c959ab8b	449	rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
fa1c1932 HS	450	};
fa1c1932 HS	451	};
c38e1328 AY	452	};
c38e1328 AY	453
8c653f9a HS	454	&tsadc {
	455	rockchip,hw-tshut-mode = <0>;
	456	rockchip,hw-tshut-polarity = <0>;
	457	status = "okay";
	458	};
	459
c38e1328 AY	460	&vopb {
	461	status = "okay";
	462	};
	463
	464	&vopb_mmu {
	465	status = "okay";
	466	};
	467
	468	&vopl {
	469	status = "okay";
	470	};
	471
	472	&vopl_mmu {
	473	status = "okay";
	474	};
	475
	476	&uart0 {
	477	status = "okay";
	478	};
	479
	480	&uart1 {
	481	status = "okay";
	482	};
	483
	484	&uart2 {
	485	status = "okay";
	486	};
	487
	488	&uart3 {
	489	status = "okay";
	490	};
	491
	492	&uart4 {
	493	status = "okay";
	494	};
	495
	496	&usbphy {
	497	status = "okay";
	498	};
5eb3fcf3 AY	499
	500	&usb_otg {
	501	status = "okay";
	502	};